Beagleboard:Capes 3.8 to 3.14

From eLinux.org
Jump to: navigation, search

Capes

Latest 3.14 to support all:

sudo apt-get update
sudo apt-get install linux-image-3.14.19-ti-r23

crypto

http://elinux.org/Cryptotronix:CryptoCape
dtb=<device>-crypto-00a0.dtb
rtc [x]
atmel_tpm [x]
atmega_uart4 [x]
atmega_gpio1_13_gpio1_17 [ ]

lcd3

lcd3-01-00a2

dtb=<device>-lcd4-01-00a2.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (4wire) [x]
buttons [X]
led [X]

lcd4

4dcape-43

dtb=am335x-boneblack-4dcape-43.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
buttons [x]
led [x]

4dcape-43t

dtb=am335x-boneblack-4dcape-43t.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (4wire) [x]
buttons [x]
led [x]

bb-view-43

dtb=<device>-bb-view-43.dtb
screen [x] (need to fix the red <-> blue)
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (4wire) [x]
buttons [X]
led [X]

lcd4-01-00a1

dtb=<device>-lcd4-01-00a1.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (4wire) [x]
buttons [X]
led [X]

lcd7

4dcape-70

dtb=am335x-boneblack-4dcape-70.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
buttons [x]
led [x]

4dcape-70t

dtb=am335x-boneblack-4dcape-70t.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (4wire) [x]
buttons [x]
led [x]

Chipsee bbb-exp-c

Make sure xorg is in 24 bit mode:

sudo sed -i -e 's:16:24:g' /etc/X11/xorg.conf
dtb=am335x-boneblack-bbb-exp-c.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (capactive touch) [x] (the startup calibrator script doesn't always pick it up on startup)
buttons [x]
led [x]

lcd7-01-00a2

untested: (no hardware)

dtb=<device>-lcd7-01-00a2.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (4wire) [x]
buttons [x]
led [x]

lcd7-01-00a3

dtb=<device>-lcd7-01-00a3.dtb
screen [x]
backlight (gpio) [x]
backlight (pwm) [ ]
touchscreen (4wire) [x]
buttons [x]
led [x]

rtc

http://elinux.org/CircuitCo:RTC_Cape
dtb=<device>-rtc-01-00a1.dtb
rtc [x]
gpio_wakup [x] - untested

Custom dtb

By default, u-boot will load a *.dtb based on what board it is:

BeagleBone White: am335x-bone.dtb
BeagleBone Black: am335x-boneblack.dtb

Unless it's overwritten by a variable [dtb=] in uEnv.txt. For example, u-boot would load the pre-built 4dcape43t, instead of the default am335x-boneblack.dtb if it was passed:

dtb=am335x-boneblack-4dcape-43t.dtb

Clone dtb-rebuilder

git clone -b 3.14-ti https://github.com/RobertCNelson/dtb-rebuilder.git
cd dtb-rebuilder/

BeagleBone White:

./src/arm/am335x-bone.dts

BeagleBone Black:

./src/arm/am335x-boneblack.dts

Build *.dtb:

make

Install *.dtb:

sudo make install