Picture Coming Soon The PWM Cape provides 32 channels of PWM output, addressed over an I2C interface. The three pin connectors are wired in a standard servo pinout, and power to the connectors can be provided from a screw terminal block on the end of the board.
Initial release of PWM Cape.
Software Support & Compatibility
The PWM Cape is addressed via I2C. Pullups to the I2C bus are provided on the board. Two GPIOs are used to enable the output on each bank of 16 channels.
Followings are some specifications of the PWM Cape:
|Size||2.15" x 2.825"|
Please visit Where To Buy for a list of distributors who carry BeagleBoardToys' capes.