Didj Common Commands
This is a collection of useful commands to have when accessing your Didj from the command prompt. Its meant as a quick reference guide, for more complex procedures look in the How To'ssection of the Didj Wiki main page.
Contents
AppManager
Stop Start Restart
/etc/init.d/lightning (start | stop | restart)
Permanently Prevent Starting
First, make the root partition mountable.
In the /etc/rc.d folder, remove these files, or back them up to a different folder.
rm K50example rm S50example rm K51lightning rm S51lightning
USB
USB File Storage
The USB mass_storage driver on the stock Didj, requires a few commands be run after its been connected to a host PC, before it will mount like a normal USB drive.
On Didj
Mount on Host
usbctl -d mass_storage -a enable usbctl -d mass_storage -a unlock
Mount on Didj
usbctl -d mass_storage -a disable usbctl -d mass_storage -a lock
Normal Mount Command
Mount the /Didj file system
mount -t vfat -o async,noatime /dev/mtdblock9 /Didj
Make Root Partition Writable
(note) NAND partitions can not be shared by USB host and device simultaneously. Developers should use the usbctl command judiciously to avoid corrupting NAND.
On Didj
mount -o remount, rw /
Manufacturer's Partition
Mount Partition
mount -t jffs2 $mfgdatamnt /mnt2/mfgfg
Make Writable
mount -o remount,rw /mfgdata
Display Commands
Power off the screen
mlc-control /dev/mlc s enable off