EBC Exercise 03 Installing a Beagle OS

From eLinux.org
Jump to: navigation, search

thumb‎ Embedded Linux Class by Mark A. Yoder


In this class we run The Debian Distribution on the BeagleBoard. Here's how to load the Debian image we'll be using on an SD card. First get a microSD card that holds at least 8G.

Downloads

There are two items you need to download, the image to copy to your SD card and the software to copy it.

Use balenaEtcher to copy to your SD card. Download it from here: https://etcher.balena.io/. It runs on Linux, Mac or Windows, so pick your favorite OS and install it. Or

host$ sudo apt install balena-etcher-electron
host$ cd /usr/bin
host$ rm balena-etcher-electron
host$ sudo ln -s /opt/balenaEtcher/balena-etcher-electron .
host$ balena-etcher-electron --no-sandbox --disable-gpu-sandbox --disable-seccomp-filter-sandbox

From https://cloudsmith.io/~balena/repos/etcher/setup/#formats-deb and https://github.com/balena-io/etcher/issues/3761

There are many versions of Debian we could use. Browse to https://forum.beagleboard.org/t/debian-11-x-bullseye-monthly-snapshot-2023-10-07/31280 and download am335x-debian-11.8-iot-armhf-2023-10-07-4gb.img.xz


If you want to be on the leading (bleeding?) edge (not recomended), browse to https://forum.beagleboard.org/t/debian-12-x-bookworm-monthly-snapshot-2023-10-07/36175 and download am335x-debian-12.2-iot-armhf-2023-10-07-4gb.img.xz

Copying to your SD card

  1. Start up balenaEtcher.
  2. Select the image you downloaded (no need to uncompress it).
  3. Put your SD card in the reader and select it.
  4. Click Flash! and wait for it to finish.

Once the SD card is flashed, put it in your Bone and boot it up.




thumb‎ Embedded Linux Class by Mark A. Yoder