File:IWave's New Generic Carrier Board.png
iWave has launched its latest Generic Qseven Carrier Board which is compatible with Qseven latest R2.0 Specification. The board is also backward compatible with R1.2 Qseven specification Any standard Qseven compliance module can be used with this Qseven Generic Carrier Board. Following different iWave’s Qseven CPU modules can be used with this Generic carrier board.
• Rainbow-G17M (Cyclone V Qseven CPU Module) • Rainbow-G15M-Q7 (i.MX6 Qseven CPU Module) • Rainbow G12M-Q7 (AM389x Qseven CPU Module) • Rainbow G8M-Q7 (i.MX51 Qseven CPU Module) • Rainbow G6M-Q7 (Intel Atom Qseven Module)
This Qseven Generic carrier board is standard Nano ITX form factor (120x120mm) supporting an operating temperature of 0°C to 50°C operating temperature. The board accepts single 12V DC input and accommodates the major Qseven interfaces specific to the ARM based CPUs.
The Generic Qseven Carrier board supports the following features,
• Debug UART console through USB Micro AB Connector • Up to 1Gbps Ethernet through RJ45 Magjack • Standard SD – 1 Port • Optional SDIO Taiyo Yuden Wi-Fi Module • USB 2.0 Host x 3 Ports • USB 2.0 OTG Port (Micro AB) • HDMI display Port • LVDS to RGB transmitter • 7” Capacitive Touch RGB Display – EDT • 4 Wire resistive touch controller • Optional 7” Resistive Touch RGB Display – Formike • LVDS display Ports – 2 Channels • GPIO Header • CAN ports with transceiver – 2 Nos • SATA Port1 – 7 Pin Connector • SATA Port2 – 22 Pin Connector • Data UART – 1 Port • Optional GPS module • AC’97 Audio CODEC with 3.5mm Audio IN/Out Jack • Optional 4-Port PCIe switch • PCIe x 1 Connector to support PCIe • Half mini PCIe Port • On-board PCie based USB 3.0 controller • Optional USB 3.0 Host – 2 ports • SPI header • JTAG Header • RTC Battery • I2C Sensors support - Ambient Light Sensor, 3-Axis Accelerometer, Digital e-Compass & Altimeter/Barometer • Reset button • Power button
Besides the standard Qseven edge interfaces, the carrier board also supports two additional 80-pin expansion connectors to support the un-available features from in the Qseven edge. These expansion connectors are supported in all the iWave Qseven CPU modules.
• 8-bit CMOS Camera Port • MIPI CSI Port • NTSC/PAL encoder with TV IN Port • Keypad header • 120-Pin carrier expansion connector
Read More: http://iwavesystems.com/iwaves-new-improved-generic-qseven-carrier-board
iWave Systems Technologies Pvt Ltd. No. 7/B, 29th Main, BTM Layout 2nd Stage, Bangalore - 560 076, India Phone: +91-80-26683700, 26786245 Website: www.iwavesystems.com , Email: mktg@iwavesystems.com
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:13, 17 September 2013 | 693 × 513 (453 KB) | Iwavesystems (talk | contribs) | iWave Systems, a firm in Embedded Systems, finds a new lucrative opportunity to help its customers by making Windows Embedded Compact 7 (WEC7) BSP available on Altera’s Cyclone V SoC. This is a new addition to iWave’s growing expertise on windows c... | |
23:32, 10 September 2013 | 693 × 513 (453 KB) | Iwavesystems (talk | contribs) | iWave has launched its latest Generic Qseven Carrier Board which is compatible with Qseven latest R2.0 Specification. The board is also backward compatible with R1.2 Qseven specification Any standard Qseven compliance module can be used with this Qsev... |
- You cannot overwrite this file.
File usage
There are no pages that link to this file.