Impressx:Arduino Shield Adapter
Contents
Description
The Shield I/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus.
Specifications
Electrical Specifications
Power Supply | 3.3V from BeagleBone Black and 5V from external Vcc Connector on BeagleBone Black |
Indication | 2 orange LED indicating 3.3V and 5V supply |
Connectors | 14 digital I/O |
6 analog inputs | |
1 I2C bus | |
optionally: 16 pin I/O expander |
Mechanical Specifications
Size | 86.5mm x 58.5mm |
Layers | 2 |
PCB Thickness | 1.6mm |
RoHS Compliant | Yes |
EEPROM
EEPROM Suport | Yes |
Board Name | ShieldIO |
Version | A1 |
Manufacturer | impressx |
Part Number | ShieldIO |
Pins Used | 33 pins |
Documentations
Open Source | No |
System Reference Manual | Yes |
Schematics | No |
PCB Files | No |
Gerber Files | No |
Bills of Materials | No |
Vendors
Manufacturer's Link
For more information about this cape, please visit impressx
To go back to the cape list, please click BeagleBone Capes