The BeagleBone Proto Cape is designed to provide a simple but productive prototyping space. This prototyping cape is equipped with a patterned prototyping area, two general LEDs, two tactile switches, one 8-pin female header and two stackable 46-pin connectors. LEDs and switches are wired to an 5-pin header for convenient access.
BeagleBone Proto Cape Features:
- Two tactile switches
- Two general LEDs with resistors
- Header access to LEDs and switches
- Stackable connectors
The solder less breadboard is sold seperately. Please check out our Breadboard Kit
This is the first revision.
No software support is required by this board.
Followings are some specifications of the BeagleBone Breadboard:
|Headers||1x HEADER FEMALE 4 pin|
|Headers||1x HEADER FEMALE 6 pin LeadLenght 10mm (supplied but unpopulated)|
|Headers||2x HEADER FEMALE 2×23 pin LeadLenght 10mm|
|Resistors||2x RESISTOR 1k 5% 0603|
|Resistors||2x RESISTOR 100k 5% 0603|
|Resistors||4x RESISTOR 10k 5% 0603|
|LED´S||2x LED 0603 GREEN|
|Switches||2x TACTILE SWITCH 6×3.5mm smd|
|MOSFET||2x N-Channel 100mA SOT23|
|Size||86.3 mm x 54.6 mm|
|PCB Thickness||1.64 mm|
No signals are used by this cape.
|Board Name||TIGAL - BeagleBone Proto Cape|
BeagleBone Breadboard Revision 1
To go back to the cape list, please click here