https://elinux.org/api.php?action=feedcontributions&user=Lob0426&feedformat=atomeLinux.org - User contributions [en]2024-03-28T16:56:34ZUser contributionsMediaWiki 1.31.0https://elinux.org/index.php?title=RPi_VerifiedPeripherals&diff=212246RPi VerifiedPeripherals2013-01-20T06:07:54Z<p>Lob0426: /* USB to SATA */</p>
<hr />
<div>[[Category: Linux]]<br />
[[Category: ARM Development Boards]]<br />
[[Category: Broadcom]]<br />
[[Category: Development Boards]]<br />
[[Category: RaspberryPi]]<br />
[[Category: Education]]<br />
{{Template: RPi_Hardware}}<br />
<br />
<br />
'''A note about this page: For USB devices, please specify if they required a powered hub'''<br />
==Notes==<br />
<br />
19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the [http://www.raspberrypi.org/downloads default Debian distribution] unless stated otherwise. A suggested suffix markup scheme is as follows:<br />
<br />
* (A) - Relates to model A production board<br />
* (B) - Relates to model B production board<br />
* (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different<br />
* No markup - relates to all production boards<br />
<br />
''Discuss: [http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247 http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247]''<br />
<br />
If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order.<br />
<br />
==Power Usage Notes==<br />
{{Warning|Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the Raspberry Pi. If the Raspberry Pi's supply voltage falls below a certain value (anecdotally stated as around 4.75&nbsp;V), or it begins to fluctuate, your setup may become unstable. There is a [http://elinux.org/RPi_Hardware#Power Wiki section about this issue] which is worth a read.}}<br />
<br />
'''Model B Hardware Revisions and USB Power limits'''<br />
'''Hardware Revision 1.0'''<br />
The original Model B board had current limiting polyfuses which limited the power output of each USB port to approximatly 100&nbsp;mA. USB devices using more than 100&nbsp;mA had to be connected via a powered hub. The Raspberry Pi's PSU was chosen with a power budget of 700&nbsp;mA of which 200&nbsp;mA were assigned to the USB ports, so the Raspberry Pi's (poly)fuses were designed only for devices up to 100&nbsp;mA, and typical 140&nbsp;mA polyfuses will have as much as 0.6 volt across them when drawing currents near the 100&nbsp;mA limit. As a consequence the USB ports are only directly suitable for "single current unit" USB devices which, according to USB specifications, are designed to work with just 4.4 Volt. Not only do non single current unit devices draw more current (causing greater Voltage drops, and greater stress on the fuses), they also might require 4.75 Volt to work.<br />
<br />
'''Model B Hardware Revision 2.0 and Revision 1.0 with ECN0001 change'''<br />
This had the polyfuses removed, removing the 100&nbsp;mA current limitation for each USB port (but leaving the main fuse F3 intact). Users should still ensure their power supply can power the Raspberry Pi and the USB peripherals. Revision 2.0 was released in August 2012.<br />
<br />
==Linux Driver Issues==<br />
Shortly after the Raspberry Pi was released it was confirmed that there were a number of issues with the Linux USB driver for the SMSC95xx chip. These included problems with USB 1.x peripherals that use split transactions, a fixed number of channels (causing problems with Kinect) and the way the ARM processor handles the SMSC95xx interrupts. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097&start=76] [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=5249&start=44]<br />
A large number of fixes were included in the 2012-08-19-Wheezy-raspbian Linux image.<br />
<br />
== Powered USB Hubs ==<br />
A number of low-cost powered USB hubs are known to have caused problems. Members of the Raspberry Pi forums have reported low power or no power at all in some cases. The following is a list of specific Powered USB Hubs which appear to be fault-free. Please note that these do not take into account powering the Raspberry Pi from the hub, in addition to its peripherals.<br />
<br />
If you use a powered hub and the Raspberry Pi PSU together consider powering them from the same power bar with switch, so you can turn them on simultaneously., especially if the HUB tries to feed the Raspberry Pi through their interconnect cable, due to the 100&nbsp;mA limiting fuse in the Raspberry Pi, the Raspberry Pi will be partially powered which may cause problems (unwanted writes to the SD card).<br />
<br />
===Working USB Hubs===<br />
<div style="margin: -.3em -1em -1em -1em;"><br />
{| width="100%" bgcolor="#fff" border="0" cellpadding="2px" cellspacing="2px" style="margin:auto;"<br />
|- align="center" bgcolor="#e7eef6"<br />
| '''Brand'''<br />
| '''Name'''<br />
| '''Model Number'''<br />
| '''Hardware ID'''<br />
| '''USB Version'''<br />
| '''Number of Ports'''<br />
| '''Power Rating*'''<br />
| '''Powers Raspberry Pi'''<br />
| '''Additional Information'''<br />
<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|4-Port Ultra-Slim Desktop Hub<br />
|F4U040<br />
|05e3:0608<br />
|USB 2.0<br />
|4-Port<br />
|5&nbsp;V - 2.6&nbsp;A<br />
|Verified<br />
| Powers the pi quite well, 4.85V across TP1&2 during idle and load. The PSU for the hub is a 2.5A 5v made in china. Seems solid. Does backfeed the mini USB port<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|8-Port ExpressBus for iMac<br />
|F5U010<br />
|<br />
|USB 2.0<br />
|8-Port 7x"A" 1x"B"<br />
|<br />
|Verified<br />
|PSU 6v 4A Powering a 256 "A" RPi with the hub. With the USB output of the RPi connected to the one "B" port<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Hi-Speed USB 2.0 4-Port Hub<br />
|F5U224<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|5&nbsp;V - 500&nbsp;mA per Port<br />
|Not Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|TetraHub™ USB 2.0 4-Port Hub<br />
|F5U231<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|5&nbsp;V - 500&nbsp;mA per Port<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Hi-Speed USB 2.0 4-Port Hub<br />
|F5U234<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|5&nbsp;V - 500&nbsp;mA per Port<br />
|Verified<br />
|No backfeed, can power the RPi. Comes with a 2.4&nbsp;A power supply. The user manual [http://www.belkin.com/pyramid/documents/external/P75268ea_F5U234ea.pdf] says ''&ldquo;Per Port Current Self-Powered Mode: 500mA (max)&rdquo;''. However, I've attached a HD that requires 850&nbsp;mA and it worked fine.<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Hi-Speed USB 2.0 7-Port Hub <br />
|F5U237<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|5&nbsp;V - 3.8&nbsp;A<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|MyEssentials 7-Port High-Speed USB 2.0 Hub<br />
|F5U259-ME<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Hi-Speed USB 2.0 4-Port Lighted Hub<br />
|F5U403<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|<br />
|Not Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Hi-Speed USB 2.0 7-Port Lighted Hub<br />
|F5U700<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|<br />
|Verified<br />
|[http://www.amazon.com/gp/product/B000SDW84K]<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Hub 2-en-1<br />
|F5U706ea<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|<br />
|Not Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Hi-Speed USB 2.0 7-Port Hub <br />
|F5U237v1<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|5&nbsp;V - 2.5&nbsp;A<br />
|Not Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Ultra-Slim Desktop Hub<br />
|F4U040v<br />
|05e3:0608<br />
|USB 2.0<br />
|4-Port<br />
|5 V - 2.6 A<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Belkin<br />
|Ultra-Slim Desktop Hub<br />
|F4U039qukAPL<br />
|05e3:0608<br />
|USB 2.0<br />
|7-Port<br />
|<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Benq<br />
|<br />
|E2220HD<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|<br />
|Verified<br />
|Monitor with built in Hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Biltema<br />
|<br />
|23-924<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|2.0&nbsp;A<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Biltema<br />
|<br />
|23-924<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|2.0&nbsp;A<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|BUFFALO<br />
|4 Port Hub<br />
|BSH4aAE06<br />
|05e3:0608<br />
|USB 2.0<br />
|4-Port<br />
|5&nbsp;V <br />
|Verified<br />
|No Problem using Webcam & wifi Dongle. seen As Genesys Logic, Inc. USB-2.0 4-Port HUB<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Cyberpower<br />
|High-speed Hub<br />
|CP-H720P<br />
|0409:0050<br />
|USB 2.0<br />
|7-Port<br />
|3.6&nbsp;A<br />
|Verified<br />
|May Contain dual 05e3:0608 instead of 0409:0050<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Dell<br />
|<br />
|2001FP<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|<br />
|Not Verified<br />
|Monitor with built in Hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Dell<br />
|<br />
|SP2309W<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|<br />
|Not Verified<br />
|Monitor with built in Hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Dell<br />
|<br />
|2407FWP<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|<br />
|Not Verified<br />
|Monitor with built-in hub - 6-in-1 card reader Works, but it cannot read SDXC<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Dell<br />
|<br />
|U3011<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|<br />
|Not Verified<br />
|Monitor with built in Hub - Card Reader Works - May work with SDXC<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Delock<br />
|<br />
|B/N61393<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|2.0&nbsp;A<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Delock<br />
|USB 2.0 External Hub 7 Port<br />
|B/N87467<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|5&nbsp;V - 3.5&nbsp;A<br />
|Verified<br />
|You can Power Raspberry Pi using one USB Port of the Hub there is no backfeeding, measured 4,88V on Idle and 4,82V on load on TP1-TP2.<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Deltaco<br />
|<br />
|UH-715 Rev 2<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|2.0&nbsp;A<br />
|Not Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Dynex<br />
|<br />
|<br />
|0409:0050<br />
|USB 2.0<br />
|7-Port<br />
|2.0&nbsp;A<br />
|Not Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Dynex<br />
|Dynex USB 2.0 7 Port Hub<br />
|DX-HB7PT<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|5.0&nbsp;V / 2.0&nbsp;A<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|D-Link<br />
|D-Link 7 Port USB Hub<br />
|DUB-H7/B<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|3.0&nbsp;A<br />
|Verified<br />
|[http://www.misco.co.uk/product/94282/D-Link-7-Port-USB-Hub] Power USB slots can be used to power Raspberry Pi.<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|D-Link<br />
|DUB-H7 High Speed USB 2.0 7-Port Hub<br />
|BUBH7A A5<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|2.0&nbsp;A<br />
|Not Verified<br />
|[http://www.amazon.com/D-Link-DUB-H7-High-Speed-7-Port/dp/B00008VFAF]<br />
<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|D-Link<br />
|DUB-H7<br />
|EUBH7EB H/W Ver:B1<br />
|<br />
|USB 2.0<br />
|7-Port<br />
|3.0&nbsp;A<br />
|Verified<br />
|[http://www.amazon.fr/gp/product/B0000B0DL7/] 7 ports including 2 ports 1.2 A sucessfully power RPI<br />
<br />
<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|D-Link<br />
|DUB-4 High Speed USB 2.0 4-Port Hub<br />
|DUB-H4<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|2.0&nbsp;A<br />
|Verified<br />
|[http://www.newegg.com/Product/Product.aspx?Item=N82E16817111131] Charging port doesn't power Raspberry Pi<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Digicom<br />
|<br />
|<br />
|<br />
|USB 2.0<br />
|4-Port<br />
|5&nbsp;V - 2.0&nbsp;A<br />
|Not Verified<br />
|[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MiniHubUsb204P#]<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|ednet<br />
|USB 2.0 7 port Hub<br />
|85014<br />
|<br />
|2.0<br />
|7-Port<br />
|<br />
|Not Verified<br />
|Works with keyboard, mouse, audio devices<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Medi@com<br />
|USB 2.0 4 ports Hub<br />
|M-HX30<br />
|<br />
|2.0<br />
|4-port<br />
|<br />
|Verified<br />
|Very small USB Hub. Powers the Rapsberry Pi and an 2.5" external HDD (LaCie Rikiki 500Gb) without problems. I already tried to connect another HDD without problems even if is not yet been mounted on linux.<br />
[http://www.mediacomeurope.it/Prodotti/Scheda.aspx?XRI=1988]<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|mbeat<br />
|13 Port USB Hub<br />
|USB-M13HUB<br />
|<br />
|USB 2.0<br />
|13-port<br />
|5V - 3A<br />
|Verified<br />
|<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Monoprice<br />
|Aquagate USB Hub<br />
|5328<br />
|<br />
|2.0<br />
|7-port<br />
|2.0&nbsp;A<br />
|Verified<br />
|Has separate USB In port, in theory should prevent backfeeding (but that is not verified). get about 4.9V across TP1/TP2 when idling with Raspbian. [http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10307&cs_id=1030702&p_id=5328&seq=1&format=4]<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Trust<br />
|Plata 4 port USB 2.0 hub<br />
|18687<br />
|<br />
|2.0<br />
|4-port<br />
|1.0&nbsp;A<br />
|Not Verified<br />
|Probably not suited to power the Rapsberry Pi but works well as a hub on the Pi.<br />
<br />
|-<br />
|}<br />
<br />
<br />
'*' Power Ratings may not be completely accurate, use as rough guideline rather than fact.<br />
</div><br />
<br />
<br />
*'''Acme'''<br />
** USB 2.0 hub 4 port ([http://www.acme.eu/en-us/product/019188 ACME]) Based on NEC μPD720114 USB2.0 Hub Controller USB ID 0409:005a '''NOTE!''' It is bus-powered hub, but it is very cheap and small and works after a small modding: on USB-hub board you have 4 holes: V, D+, D- and GND. Connect GND, D+ and D- to the Raspberry Pi, and additionally connect GND and +5&nbsp;V from power supply to the same holes on USB-hub GND and V. Now there is common contacts: GND, D+ and D- between Raspberry Pi and hub needed to work, and additional power for USB devices, connected to the hub. Tested on my Raspberry Pi.<br />
<br />
<br />
*'''Digitus'''<br />
** 7-port USB2.0 Powered Hub. Model DA-70226.<br />
*'''Eminent'''<br />
** [http://www.eminent-online.com/en/product/22/em1102-4-port-usb-hub---black.html] EM1102 4 Port USB 2.0 Hub with 1&nbsp;A power adapter. It's able to power the Raspberry Pi, external HDD and other peripherals.<br />
** [http://www.eminent-online.com/en/product/27/7-port-usb-2-0-hub.html] EM1107 7 Port USB 2.0 Hub with 2&nbsp;A power adapter. It's able to power the Raspberry Pi, external HDD and other peripherals.<br />
* '''GearHead'''<br />
** [http://www.amazon.com/gp/product/B004OBZ088/] GearHead 4 Port Hub with Energy Saving Power Switch (5&nbsp;V, 1&nbsp;A)<br />
*'''Gembird'''<br />
** Gembird UHS 242 4-port USB 2.0 Hub (5V DC, 1A). '''NB:''' This is a 4-port switching hub that enables the "sharing" of up to four USB devices between two computers. Whilst it may be powered externally, it does take power from both connected computers. If one of them is, say, a netbook or laptop, that may provide sufficient extra power to enable the use of USB devices that the Pi alone cannot handle.<br />
* '''Genesys Logic (sold at Fry's)'''<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0608) (Other brands include Gigaware and Belkin, same ID shows up in lsusb)<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0606) (Other brands include i-Rocks, same ID shows up in lsusb)<br />
* '''Hama'''<br />
** Hama 4-way USB 2.0 Hub<br />
*'''HP'''<br />
** HP ZR2240w 21.5" Monitor with built in 2-Port USB Hub (B)<br />
* '''König Electronic'''<br />
** CMP-USB2HUB55 - 7 port USB2.0 HUB, (ID 1a40:0201 Terminus Technology Inc. Hub) 2.0&nbsp;A power supply, backpowers Raspberry Pi well.<br />
*'''Laser'''<br />
** "7 port USB hub with AC adapter Version 2.0". 5&nbsp;V 1&nbsp;A (found at Harvey Norman Australia for $24.95 and Australia Post Shops for $9.95). You can power the Raspberry Pi by connecting both the main USB connector to the Raspberry Pi USB port, '''and''' from a spare USB port back to the power micro USB socket. If you don't do both, boot-loops are likely to occur.<br />
*'''Logik'''<br />
** [http://www.currys.co.uk/gbuk/logik-lp4hub10-4-port-powered-usb-hub-04979038-pdt.html] LP4HUB10 4-Port USB Hub. '''Throws errors when used with Fedora remix 14'''<br />
** Logik L4THUB10 4 Port powered hub works fine under Raspbian/Wheezy/model B. Captive USB cable, 2&nbsp;A power supply, convenient single top mounted USB socket. Unlike my last hub, will power Wi-Fi!<br />
*'''LogiLink'''<br />
** UA0085 USB 2.0 Hub, 4-Port with PSU 5&nbsp;V, 2&nbsp;A<br />
** UA0091 USB 3.0 Hub, 4-Port with PSU 5&nbsp;V, 4&nbsp;A. Connected with USB2.0 cable. 1&nbsp;A per port, able to support USB HDD drives and other power hungry devices. Tested with kernel 3.1.9-cutdown, Wheezy. <br />
** UA0096 USB 2.0 Hub, 10-Port with PSU 5&nbsp;V, 3.5&nbsp;A (Not suitable for powering Raspberry Pi because it doesn't work unless there is working USB input present even with PSU plugged in.)<br />
** UA0160 USB 2.0 Hub, 4-Port with PSU 5&nbsp;V, 2&nbsp;A. Able to power the Raspberry Pi, keyboard, mouse and LogiLink UA0144 USB Ethernet adapter. (More testing to come.) Was not able to record audio properly via a Soundblaster Play! device.<br />
* '''Macally'''<br />
** [http://www.macally.com/EN/?page_id=2312] Hi-Speed 7-Port USB 2.0 Powered Micro HUB, AC Powered. Includes a 2000&nbsp;mA wall-wart (US style)<br />
* '''Manhattan'''<br />
** [http://manhattan-products.com/en-US/products/6500-hi-speed-usb-2-0-micro-hub] (#160612) Hi-Speed USB 2.0 Micro HUB, AC Powered (identifies as ID 05e3:0608 Genesys Logic) Includes a 1000&nbsp;mA wall-wart (US style)<br />
** [http://manhattan-products.com/en-US/products/9583-mondohub] (#161718) MondoHub 28 Port USB 3.0 & USB 2.0 HUB (24 USB 2 ports @500&nbsp;mA each) + (4 USB 3.0 Ports @900&nbsp;mA each) Power Switches on each port, AC Powered and Includes a 5&nbsp;V 4&nbsp;A wall-wart (US style)<br />
*'''Newlink'''<br />
** NLUSB2-224P 4 port USB 2.0 Mini hub with PSU 5&nbsp;V 1&nbsp;A<br />
** NLUSB2-222P 4 port USB 2.0 Hub with 5&nbsp;V 2&nbsp;A PSU (Available From [https://www.modmypi.com/shop/raspberry-pi-accessories/New-Link-4-Port-USB-Hub-(USB-2.0-with-Mains-Adaptor) | ModMyPi])<br />
*'''Nilox'''<br />
** Nilox USB 2.0 4port HUB model HUB4USB2AC with PSU 5&nbsp;V 1.0&nbsp;A<br />
* '''Plugable'''<br />
** [http://plugable.com/products/USB2-HUB4BC/] USB2-HUB4BC 4 Port USB 2.0 Hub with BC 1.1 Fast Charging. 5&nbsp;V 2.5&nbsp;A power supply. Powering Raspberry Pi via microUSB from a hub port. USB Audio peripheral tested and working.<br />
** [http://plugable.com/products/USB2-HUB10S] USB2-HUB10S 10 Port USB 2.0 Hub 2.5&nbsp;A power supply. Powering Raspberry Pi via microUSB from a hub port.<br />
** [http://plugable.com/products/USB2-HUB-AG7/] USB2-HUB-AG7 7 Port USB 2.0 Hub with 5&nbsp;V 3&nbsp;A power supply. There are US and UK power supply versions and it can be ordered in US and (for the UK version) many countries in Europe. There is a video showing this hub powering both the Raspberry Pi several peripherals at once[http://www.youtube.com/watch?v=pDA7MxFtoS0].<br />
<br />
* '''Pluscom'''<br />
** Pluscom 7 Port USB 2.0 Hub Model U7PH-3A with 3&nbsp;A PSU. USB ID 1a40:0101. Powering Raspberry Pi via microUSB from a hub port. Internally two 4 Port switches linked. Leaks power back up USB data cable to Raspberry Pi, but it is not really a problem when powering Raspberry Pi at the same time.<br />
*'''Satechi'''<br />
** ST-UH12P 12 port powered hub with 2 Control Switches. Also works while powering the Raspberry Pi.<br />
*'''Staples (Business Depot) (Bureau EN GROS)'''<br />
** Staples 4-port hub Item 607477-CA<br />
*'''StarTech.com'''<br />
** StarTech.com 7-port Compact USB 2.0 Hub (ST7202USB). Comes with 5&nbsp;V 2&nbsp;A supply. Shows in lsusb as two Genesys Logic, Inc. USB-2.0 4-Port HUBs (05e3:0608). Back powers Raspberry Pi (just, voltage across TP1 & TP2 is a little low when powered from this hub).<br />
*'''SumVision'''<br />
** Sumvision Slim 4 Port High Speed USB 2.0 HUB with PSU 5&nbsp;V 1.0&nbsp;A (from [http://www.7dayshop.com/catalog/account_history_info.php?page=1&order_id=5130107 | 7dayshop ])<br />
*'''Sitecom'''<br />
** CN-032 4 Port USB 2.0 Pocket Hub. Works for powering the Raspberry Pi, an USB WLAN Adapter, wireless Kbd+Mouse. Using an 2500&nbsp;mA Voltcraft <br />
** CN-060 4 Port USB 2.0 Hub powered with AC Adapter (1&nbsp;A). Powering Raspberry Pi via microUSB from a hub port.<br />
** CN-061 7 Port USB 2.0 Hub powered with AC Adapter. There is a voltage problem on the left half of the hub (4 ports) that do not deliver enough current to feed a wifi dongle (tested with an RTL8191S); you should not use these ports for anything important (keyboard keys will stick, self-powered USB hard disk will reset continuously). The remaining 3 ports on the right half are instead working as expected. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=24247]<br />
*'''Sweex'''<br />
** US014 4 Port USB 2.0 Hub<br />
*'''Targus'''<br />
** ACH81xx 7-port powered hub. 5&nbsp;V 3&nbsp;A power supply, with 2 high power ports. (possible conflicting behaviour with USB keyboard / Wi-Fi Dongles)<br />
** ACH63EU 4-port. Using a 5&nbsp;V 2&nbsp;A power supply, which isn't supplied with the hub, it is able to power the Raspberry Pi as well.<br />
*'''The Pi Hut'''<br />
** 7 Port USB Hub (from [http://thepihut.com/products/7-port-usb-hub-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
*'''Trendnet'''<br />
** [http://www.trendnet.com/products/proddetail.asp?prod=130_TU2-700&cat=49] TU2-700 7 Port Powered USB 2.0 Hub with AC Adapter (5&nbsp;V 2&nbsp;A)<br />
*'''Tripp-Lite'''<br />
** [http://www.tripplite.com/en/products/model.cfm?txtModelID=3167] U222-007-R 7 Port Powered USB 2.0 Hub with AC Adapter (5&nbsp;V 2.5&nbsp;A) Powering Raspberry Pi from the hub works.<br />
*'''Ultron'''<br />
** [http://www.ultron.de/v1/produktansicht.php?artnr=67072&kid=bfa8340c4e245...&l=en&WGType=Neue+USB-HUBS] UHN-710 7-port powered hub with PSU 5&nbsp;V, 3&nbsp;A. USB ID 1a40:0201.<br />
*'''VANTEC'''<br />
** 4 Port USB 2.0 Powered Hub Model: UGT-MH304. 5&nbsp;V 2&nbsp;A AC/DC adapter. Go 2.0 Mini hub.<br />
*'''Z-TEK'''<br />
** Z-TEK 7-port powered hub with PSU 5&nbsp;V, 4&nbsp;A. USB ID 1a40:0201.<br />
*"Unknown"<br />
** 10(7-4) port hub idVendor=1a40, idProduct=0201 / idVendor=1a40, idProduct=0101 works<br />
<br />
===Problem USB Hubs===<br />
<br />
Please check known workarounds [http://elinux.org/Rpi_USB_check-list here] before adding to the list<br />
<br />
*'''Addon'''<br />
** 7-Port Powered Hub - labelled ADDUH070P - Gives constant Eth0 errors on boot.<br />
*'''Belkin'''<br />
** 7-Port Powered Mobile Hub - device labelled F4U018, packaging labelled F5U701. lsusb reveals it to be two Genesys Logic 4-port hubs based on the GL850G chipset (vendor: 0x05e3 product: 0x0608) ganged together. Yields a lot of "handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" errors and device resets in /var/log/messages. Low speed devices such as keyboards work OK, Wi-Fi/mass storage is unreliable or broken. -- No error messages with the latest kernel, but it is still unstable with mass storage devices. Also, leaks current back to the Raspberry Pi (can be fixed by overtaping GND and +5&nbsp;V pinouts)<br />
** F4U022 7-Port powered USB hub (powered 5&nbsp;V, 2.6&nbsp;A), same as F4U018<br />
** 7-Port Powered Hub - device labled F5U237 Rev.3 - ID 050d:0237 Wired Ethernet fails to connect; gives "DWC OTG HCD URB enqueue failed adding QTD. Error status -4008" Result is same as DUB-H7 below.<br />
** F5U404 Hi-Speed USB 2.0 4-Port Mobile Hub. Faulty/bad design; Leaks current back up the cable to the Raspberry Pi.<br />
** F5U307 Hi-Speed USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time) It work's sometimes. (Works always without powering the Raspberry Pi, haven't tried that)<br />
<br />
*'''Dell'''<br />
** Dell U2410 Monitor Built-in 4 Port Hub - Shows up as a pair with 0424:2514 and 0424:2640. Standard Microsystems Corp. USB 2.0 Hub. When connecting some devices it kills the Ethernet with "smsc95xx 1-1.1:1.0: eth0: Failed to read register index 0x0000011X" errors. It did work for a keyboard and webcam. Bluetooth that works connected directly to the Raspberry Pi triggers the error.<br />
<br />
*'''DELTACO'''<br />
** 7-Port USB Hub UH-713 Rev 3. This one consists also of two 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUBs connected together. The power supply is rated at 5 V 2 A. It kills Ethernet when X11 is started.<br />
<br />
*'''Dynex'''<br />
** 7-Port USB Hub - Does not work in Debian 19-04 image.<br />
** DX-HB7PT 7-Port USB Hub - As per the Gear Head below, it's 2 daisy-chained Genesys Logic 05e3:0608 devices. Appears to result in significant slow downs when the USB is under load, such as running the root filesystem from a USB drive.<br />
<br />
*'''Dynamode'''<br />
** 7-Port USB 2.0 Hub (Silver and black). Feeds power back up the interconnect to the Raspberry Pi causing the power LED to light on the Raspberry Pi if the hub is powered on, but the Raspberry Pi is not. The Raspberry Pi also fails to boot when powered off this hub, with or without the interconnect plugged in. Stops the network from working when connected to the Raspberry Pi after booting the Raspberry Pi - cannot ssh to the Raspberry Pi. Best avoided. :-( Shows up in ''lsusb'' as a pair of ''ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB'' which is interesting. - Confirmed. This hub also appears unable to power an external USB drive using a y-cable as it gives the error -71 message in dmesg (when providing external power to the Raspberry Pi).<br />
** 4-Port High-Speed USB 2.0 Hub (USB-H40-A2.0), came with with a 1&nbsp;A power supply. Leaks power to the Raspberry Pi through the uplink. Doesn't work with Raspberry Pi, unless the Raspberry Pi is powered by a second power source. This hub is completely generic and I've seen it being sold under different brand names as well. Therefore, a picture is [http://i.imgur.com/BPZ3j.jpg included] for easy identification. <br />
<br />
*'''D-Link'''<br />
** 7-Port USB Hub DUB-H7 (Crashes USB stack, including Ethernet, when plugging / using some peripherals). (See note above, it works with some distros and/or with latest firmware)<br />
<br />
*'''E-Solution'''<br />
** 4-Port 2&nbsp;A Supply (Does not detect at all during boot or after boot- no messages) [IC = Alcor Micro Corp (AU6254)]<br />
<br />
*'''Fosmon'''<br />
** 7-Port USB 2.0 Hub with 1&nbsp;A Power Supply (Causes interference with other USB devices and sends enough power to light up the Raspberry Pi with it's Micro USB cable unplugged).<br />
<br />
*'''Gear Head'''<br />
** UH7250MAC 7-port powered hub. Internally, two daisy-chained Genesys Logic 05e3:0608 devices. Causes Ethernet instability when used under very specific circumstances, in X11.<br />
** <strike>UH5200T 4-port powered hub. As of 2012-08-16 Wheezy, if any USB 1.x device (a keyboard, for example) is plugged into this hub, Ethernet stops, and USB interrupts for other devices get dropped (keys repeating forever), etc. Occurs even if power is not attached (not a power leakage problem).</strike> Appears working after a bootloader and/or firmware update on 9/12. Also, turned out to be somewhat more specific to the combination of two particular low-speed devices.<br />
<br />
*'''Hama'''<br />
** 4-Port USB 2.0 "bus hub", model 78496 (?). Only works for low power devices (card readers?), but it does not work for power hungry devices (HDD and WLAN). It doesn't boot when hub connected to Raspberry Pi. The funniest thing is that Raspberry Pi powers on when I plug in this hub to normal size USB port (not that small dedicated port). idVendor=05e3, idProduct=0608<br />
<br />
*'''Kensington'''<br />
** 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning keyboard, kills mouse when GUI started).<br />
<br />
*'''iBall'''<br />
** Piano 423 4-Port USB hub. Listed in lsusb as Genesys Logic. Fails to deliver enough power to connected devices even when using AC power suply.<br />
<br />
*'''Inland'''<br />
** 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't, cheap unshielded untwisted wire design)<br />
<br />
*'''Logik'''<br />
** LP7HUB11 7-Port USB Hub. (Ethernet failed, slow response, in LXDE. Happened whether or not the hub's independent power supply was connected to the hub.)<br />
<br />
*'''LogiLink'''<br />
** 7-Port powered USB-Hub with switch UA0124. Does not work even with a x86 Linux box. Does work with Windows and comes with a beefy 3,5 A power supply that works with a Belkin 7-port mobile USB-Hub to power a cluster of 4 Raspberries.<br />
<br />
*'''Soniq'''<br />
** 4-Port 5&nbsp;V supply. Model number CUH100. (B). Appears to draw power away from the Raspberry Pi, even when the Raspberry Pi has an isolated power line. Netgear WNA1100 Wi-Fi Adapter (which is known to work in other setups is recognized, but it is unresponsive).<br />
<br />
*'''Targus'''<br />
** ACH115EU 7-port powered hub. 5&nbsp;V 3&nbsp;A power supply. Arduino communicates with Raspberry Pi when connected directly to Raspberry Pi's USB port, but it hangs as soon as if connected via ACH115. Also sometimes smsc95xx eth0 Failed to read register index 0x00000114 etc. errors in syslog when used.<br />
<br />
*'''TCM'''<br />
** Model 234298 s/n T634007737 powered hub. 4 ports plus card reader. 1&nbsp;A power supply. Model B, Wheezy Raspbian works OK with keyboard/mouse, but there are problems with Wi-Fi no connects. (insufficient power?)<br />
<br />
*'''Trust'''<br />
** 10-port USB 2.0 Hub (powered). Prevents Ethernet from being recognised.<br />
** SliZe 7 port USB 2.0 Hub (powered) - Item number 17080 (Barcode 8 713439 170801). Prevents Ethernet from being recognised. Keyboard sends multiple characters. <br />
<br />
*'''Unbranded / Multiple Brands'''<br />
** 7-port silver/black hub. Also sold elsewhere under brands such as 'EX-Pro', 'Trixes' and 'Xentra' -- This is ''probably'' due to an inadequate power supply. -- I replaced the terrible power supply with a very good one, kept getting "DEBUG: handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" in dmesg, with no devices plugged in to the hub (with or without the power supply in). Measurements by [[User:TrevorGowen|TrevorGowen]] ([[User talk:TrevorGowen|talk]]) of the power loading behaviour of an example of this type of hub and its supplied PSU are logged at [http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/PoweredUSBHubs.html CPM-Spectre-Pi...PoweredUSBHubs], together with similar measurements of other devices.<br />
** Generic 7-port black hub with Genesys Logic GL850A chipset<br />
** Cerulian 10 Port USB 2.0 Top Loading Hub with 2&nbsp;A supply (kills mouse and network port)<ref>http://www.raspberrypi.org/forum/absolute-beginners/cheap-powered-usb-hub-uk/#p76452</ref><br />
** [http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10307&cs_id=1030701&p_id=226 USB 2.0 4 PORT INT/EXT DUAL HUB BAY] -- Genesys Chipset -- idVendor=05e3, idProduct=0607 -- low speed devices worked, but there are strange USB failures when X session started. High speed devices such as hard drives had failures.<br />
<br />
== USB Remotes ==<br />
* ATI Remote Wonder (X10 Wireless Technology, Inc. X10 Receiver) — ID 0bc7:0004 — appears as a joystick-like 2 button mouse and a 0-9 keypad without drivers on console and X.<br />
<br />
* [http://www.amazon.com/gp/product/B005DKZTMG/ref=oh_details_o02_s00_i00 Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad (920-003070)] - keyboard and touchpad work. Have not verified multi-touch features.<br />
<br />
* [http://www.ipazzport.com/02A.html iPazzport] mini 2.4&nbsp;GHz wireless keyboard and touchpad. <br />
<br />
* [http://www.ortek.com/html/pdt_view.asp?area=46&cat=152&sn=76 PKB 1800] Wireless Smart Pad ad Mini Keyboard. The pad works as a mouse, but not multi touch features. The keyboard works.<br />
<br />
* [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] '''Rii''' Wireless 2.4&nbsp;GHz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]. Working perfectly, just plug & play.<br />
<br />
* [https://www.google.com/search?q=tranksung+TS-Y150 Tranksung TS-Y150] USB RF Keyboard and air mouse (B)<br />
<br />
* [http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6753651&CatId=3680# Exo Ultra U12-41310 Mini Keyboard] Bluetooth Adapter, Touchpad, Laser Pointer, Presentation & Multimedia Controls work perfectly, but it needs a little love and config for make it work.[https://github.com/thunderbirdtr/rs-pi-exo-keyboard Exo Installer script]<br />
<br />
== USB Keyboards ==<br />
USB keyboards that present themselves as a standard HID (Human Interface Device) device should work. '''Please be aware that some of these keyboards were probably used with a powered hub'''<br />
=== Working USB Keyboards ===<br />
The following is a list of specific keyboards known to work and which appear to work fault-free.<br />
<br />
* '''A4 Tech'''<br />
** Model KL-5 USB Keyboard, 20&nbsp;mA.<br />
<br />
* '''ABS'''<br />
** M1 Heavy Duty Professional Gaming Mechanical Keyboard (B)<br />
<br />
* '''Action Star'''<br />
** ACK-5010U Mini Keyboard And Mouse<br />
<br />
* '''Accuratus'''<br />
** KYB-Toughball-HI<br />
<br />
* '''Acer'''<br />
** KG-0917 Wireless Keyboard And Mouse Bundle (B)<br />
** KU-0906 Compact Keyboard (B) (Also known as Genius LuxeMate i200 Keyboard)<br />
** SK-9625 Multimedia Keyboard (B) (multimedia functions not tested)<br />
<br />
* '''Adesso'''<br />
** [http://ergoprise.com/product_images/j/699/ADP-PU21_big__14173_zoom.jpg PS/2 to USB Adapter] ADP-PU21, 100&nbsp;mA (tested only with keyboards) Any PS/2 keyboard will work only if it will work with a reduced operating voltage.<br />
** Model AKB-410UB. Keyboard with Touchpad.<br />
<br />
* '''Apple''' (Apple keyboards that have USB ports require an external powered hub to work, and do not work on the Raspberry Pi directly! Note: Apple keyboard works fine using the latest Raspberry Pi, even when connected directly (and with mouse connected))<br />
** [http://upload.wikimedia.org/wikipedia/commons/thumb/e/ea/Apple_iMac_Keyboard_A1243.png/800px-Apple_iMac_Keyboard_A1243.png Apple Keyboard with Numeric Keypad (aluminium/wired) A1243]<br />
** [http://upload.wikimedia.org/wikipedia/commons/8/81/Apple_Keyboard_A1242.jpg Apple Keyboard (aluminium/wired) A1242]<br />
<br />
* '''Asda'''<br />
** Basic Wired Keyboard HK2026 (B)<br />
** Basic Wired Keyboard HK3014<br />
*** (Please note when I put this keyboard through Newlink USB hub, it didn't work as expected)<br />
** Premium Wireless Keyboard (white keys, silver back) HK8028<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''Asus'''<br />
** KS-631U (comes with Asus Vento KM-63 keyboard/mouse set, not using powered hub) (B)<br />
<br />
* '''Banbridge'''<br />
** [http://www.kurpirkti.lt/imagesi/infodb/org_d69dbd9707af8df77eae6e005f681a9a/BANDRIDGE-USB-2X-PS-2-ADAPTER.jpg PS/2 to USB Banbridge CPA4002 Adapter] (B) (Tested with Logitech C-SF17 Cordless Desktop Express)<br />
<br />
* '''BTC - Behavior Tech Computer Corp.'''<br />
** Wired Portable Keyboard Model 6100 US (86+9 keys)<br />
*** Works with or without a powered hub<br />
** Wireless Multimedia Keyboard with build in pointer/mouse Model 9029URF III (86+17 keys) (B)<br />
** [http://www.btc.com.tw/english/2-7-07keyboard.htm Wired Multimedia keyboard 6311U/6310U] - rated at 5&nbsp;V/100&nbsp;mA, works directly<br />
<br />
* '''Bush'''<br />
** Wired Slimline Keyboard KU-0833<br />
*** This does not require a USB hub in order to work with the Raspberry Pi<br />
*** In the UK, it is available from Argos for £9.99<br />
<br />
* '''Cerulian''' <br />
** Mini wireless keyboard and mouse deskset (B)<br />
<br />
* '''CD Training''' <br />
** [http://www.cd-training.fr/?&feed=product&product_id=308 Wireless Combo Keyboard and Mouse (SolClavGlos)]<br />
<br />
* '''Cherry'''<br />
** CyMotion Master Linux (B)<br />
** RS 6000 USB ON<br />
** G84-4100PTMUS (B) (Compact keyboard. Rated 100&nbsp;mA. Works directly in Raspberry Pi)<br />
** G85-23100DE-2 (B) (Rated 40&nbsp;mA, tested with RPi powered by a 1000&nbsp;mA power supply unit)<br />
** G82-24800DE wireless keyboard and mouse combo marketed overwhelmingly as "Cordless Desktop eVolution Sirius XT Wireless", works without hub.<br />
<br />
* '''Compaq'''<br />
** Compaq Internet Keyboard KU-9978 (049f:000e). Rated 5&nbsp;V 100&nbsp;mA. Works directly connected to Raspberry Pi<br />
<br />
* '''Das Keyboard'''<br />
** Model S Professional Keyboard (Built in USB hub not tested) (B)<br />
** Model S Ultimate Keyboard (Built in USB hub working) (B)<br />
<br />
* '''Dell'''<br />
** SK-8115 (B) (Rated 100&nbsp;mA. Works directly in Raspberry Pi)<br />
** L100 (B)<br />
** RT7D40 (100&nbsp;mA. Works directly in Raspberry Pi)<br />
** RT7D50 (75&nbsp;mA) (run "sudo dpkg-reconfigure keyboard-configuration")<br />
** KB1421 (100&nbsp;mA)<br />
** KB2521 (100&nbsp;mA)<br />
** KB212-B (Works directly in Raspberry Pi, without powered hub)<br />
** 1HF2Y (Works directly in Raspberry Pi)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500&nbsp;mA, but it works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Delux'''<br />
** K8050<br />
<br />
* '''Digicom'''<br />
** WKEYPE01 Wireless 2.4&nbsp;GHz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
* '''Dynex'''<br />
** DX_-WKBD (60&nbsp;mA) (B)<br />
** DX_-WKBDSL (Hot keys not yet tested with Debian) (tested through non-powered 3 dongle USB hub) (B)<br />
<br />
* '''EAPPLY'''<br />
** EBO-013 Wireless 2.4&nbsp;GHz compact keyboard with touchpad. Rated <40&nbsp;mA works directly from Raspberry Pi. eBay ref 260962010276 from Shenzen, China.<br />
<br />
* '''Emprex'''<br />
** Wireless Media Control Keyboard With Trackball 9039ARF III (Media functions untested)<br />
<br />
* '''Fujitsu Siemens''' <br />
** KB SC USB UK (!)<br />
** KB910 USB, with led light on the highest level (B)<br />
** KB400 USB US<br />
<br />
* '''GE''' <br />
** 98139 Rev.K1 (Power Keyboard) (lsusb shows it as "0b38:0010 Gear Head 107-Key Keyboard") - works without a hub (i.e. directly connected) (B)<br />
<br />
* '''Gear Head''' <br />
** KB3700TP (USB Mini Smart Touch Touchpad Keyboard) (B)<br />
** KB3800TP (Wireless Touch Mini Touchpad Keyboard with Smart Touch) (B)<br />
*** Works when plugged directly into Raspberry Pi, did not work with powered hub (could be a hub issue)<br />
** KB3800TPW (Windows Smart Touch Wireless Keyboard with Touchpad) (B)RASPBMC supported >> also see Problem USB Keyboards<br />
** KB4950TPW (Wireless Touch II Touchpad Keyboard) (B)<br />
** KB1500U (USB Mini Keyboard) (B)<br />
** KB5150 (2.4&nbsp;GHz wireless keyboard/mouse Combo) (B)<br />
*** Works well with a powered hub<br />
<br />
* '''Generic'''<br />
** [http://www.amazon.co.uk/gp/product/B00A8D9ZPA/ref=oh_details_o06_s00_i00 AK-601] Wireless Mini-keyboard and Trackball. Works well as a handheld device, the wireless dongle does not appear to draw excessive current. However, since its USB charging port requires 5V 300mA it does need to be recharged from a netbook/laptop USB port or via a (spare) USB charger.<br />
<br />
* '''Genius'''<br />
** Ergomedia 700 (GK-04008/C) used without Hub<br />
** KB-06XE (K639) (B)<br />
** LuxeMate i200 (GK-090017; not tested with Hub)<br />
** Slimstar 8000 wireless keyboard<br />
<br />
* '''Gigabyte'''<br />
** GK-KM7580 2.4&nbsp;GHz Wireless Multimedia Keyboard & Mouse<br />
<br />
* '''HP'''<br />
** KG-1061<br />
** KG-0851 Wireless Keyboard and Mouse<br />
** KU-0316 (B)<br />
** LV290AA#ABA Wireless Keyboard and Mouse<br />
** PR1101U (available from Sainsbury's in the UK, £8, July 2012)<br />
** SK-2880<br />
<br />
* '''Hyundai'''<br />
** HY-K201<br />
<br />
* '''iConcepts'''<br />
** 2.4&nbsp;GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Imation''' <br />
** KBD-702 Multi-media Wired Keyboard<br />
*** (works after the firmware update via [https://github.com/Hexxeh/rpi-update rpi-update] as of 06/27/2012)<br />
<br />
* '''IOGEAR'''<br />
** IOGEAR GKM561R Wireless HTPC Multimedia Keyboard with Trackball<br />
** IOGEAR GKM681R 2.4&nbsp;GHz Wireless Compact Keyboard with Optical Trackball and Scroll Wheel<br />
<br />
* '''iPazzPort'''<br />
<br />
* '''i.t.works'''<br />
** KC04 (direct and by USB hub)<br />
** KC Silicone (only tested directly)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''KeySonic'''<br />
** ACK-540RF (Wireless USB keyboard with built-in trackpad); works fine on Debian Squeeze plugged directly into Raspberry Pi. Also works with Raspbmc with powered hub.<br />
** ACK-540RF+ (UK) Wi-Fi keyboard incl. touchpad with USB Wi-Fi dongle works fb with on model B/Raspbian/Wheezy via powered hub<br />
** ACK-3700C<br />
** ACK-340U+(DE)<br />
** ACK-3400U (UK) mini keyboard<br />
** ACK-612RF (GER) Wireless Mini-Keyboard; works fine with its wireless adpater plugged directly into Raspberry Pi<br />
<br />
* '''Labtec'''<br />
** [http://www.labtec.com/index.cfm/gear/details/EUR/EN,crid=28,contentid=692| Ultra-flat Keyboard]<br />
<br />
* '''Laptopmate'''<br />
** AK-98UNTN7-UBRII Laptopmate RII Touch N7 Mini Wireless Keyboard with touchpad<br />
<br />
* '''LC-Power<br />
** K1000BMW (lsusb: ID 1241:f767 Belkin; dmesg: HOLTEK Wireless 2.4&nbsp;GHz Trackball Keyboard) tested with Debian 6.0.4<br />
<br />
* '''Lenovo'''<br />
** SK-8825 UK (B)<br />
** Lenovo Enhanced Multimedia Remote with backlit keyboard N5902 (US)<br />
** Lenovo Mini Wireless Keyboard N5901 (US)<br />
<br />
* '''Lindy'''<br />
** 21840 (Wireless RF 2.4&nbsp;GHz Micro Keyboard with built-in optical touchpad/trackpad, USB); works fine on model B/Raspbian/Wheezy - the supplied Lindy USB nano dongle transceiver plugged directly into Raspberry Pi USB port.<br />
<br />
* '''Logik'''<br />
** Ultra slim keyboard LKBWSL11 (B) >> '''This is also listed under Problem USB Keyboards?'''<br />
** LK212(R, B, P, V, O at the end represents the colour ) Wireless Keyboard paired with wireless receiver<br />
<br />
* '''Logitech'''<br />
** Comfort Wave 450, labeled 100&nbsp;mA (M/N Y-U0001, P/N 820-001725, PID SC951C40001)<br />
** diNovo Mini wireless keyboard with media controls and clickpad 920-000586 (B)<br />
** diNovo Edge Keyboard, Windows edition, built-in TouchDisc track-pad, Bluetooth with USB mini-receiver 967685-0403 (B)<br />
*** older model 867777-0403 may need '''dwc_otg.speed=1''' added to cmdline.txt to avoid dropped/repeated keys and dropped mousepad taps/clicks (B)<br />
**** after Raspbian dist-upgrade about 12/12/12, if '''/lib/udev/rules.d/97-bluetooth-hid2hci.rules''' exists and di Novo Edge fails to respond, edit tail of line after "# Logitech devices" in that file from '''c71['''34'''bc]''' to '''c71[bc]''' to ignore c713 and c714 (do not wordwrap long line), then it works fine<br />
** Wii wireless keyboard KG-0802 (!)<br />
** C-BG17-Dual Wireless keyboard and mouse with wired USB receiver (B)<br />
** Deluxe 250 Keyboard<br />
** Internet 350 (M/N 967740-0403)<br />
** Internet Navigator Keyboard<br />
** MK120 wired keyboard and mouse<br />
** MK220 wireless keyboard and mouse<br />
** MK250 wireless keyboard and mouse (no hub needed)<br />
** MK260 wireless keyboard and mouse (no hub needed)<br />
** MK300 wireless keyboard and mouse<br />
** MK320 wireless keyboard and mouse [http://www.amazon.co.uk/Logitech-920-002885-MK320-Wireless-Desktop/dp/B003STDQYW/ref=sr_1_3?ie=UTF8&qid=1339166178&sr=8-3]<br />
** MK350 wireless keyboard (using Unifying receiver)<br />
** MK520 wireless keyboard and mouse<br />
** MK550 wireless keyboard and mouse (B)<br />
** MX3200 wireless keyboard and mouse (B)<br />
** MX5000 Bluetooth keyboard and mouse (B) The Logitech Bluetooth dongle also does proprietary wireless so it works without Bluetooth drivers.<br />
** EX100 Cordless Desktop, Wireless Keyboard and Mouse (B)<br />
** EX110 Cordless Desktop, wireless keyboard and mouse (B)<br />
** C-SF17 Cordless Desktop Express, Wireless Keyboard and Mouse (B) PS/2 Interface. Tested using [http://www.kurpirkti.lt/imagesi/infodb/org_d69dbd9707af8df77eae6e005f681a9a/BANDRIDGE-USB-2X-PS-2-ADAPTER.jpg PS/2 to USB Banbridge CPA4002 Adapter]<br />
** K120 Keyboard (B)<br />
** K200 Keyboard (B)<br />
** K230 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K340 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K350 Wireless Keyboard (B)<br />
** K400 wireless keyboard with touchpad - also listed under "problematic". Works for weeks with openelec and Raspbian without any problems. Worked out of the box - the on/off switch needs to be "on" for it to function correctly. Highly recommended if you are "working from the sofa". <br />+1 on this, works out of the box with 2012-10-28-wheezy, no powered hub.<br />
** K520 Keyboard (B)<br />
** K700 Wireless Keyboard with Touchpad and unifying receiver<br />
** K750 Wireless Solar Keyboard (B) (Mac version works too. (B) )<br />
** LX 710 - works fine with receiver plugged directly into the Raspberry Pi (accompanying mouse works fine too).<br />
** S510 wireless keyboard and mouse (B)<br />
** Ultra-Flat Keyboard (M/N Y-BP62A P/N 820-000245 PID SY126UK)labelled 100&nbsp;mA. OK direct into Model B Raspberry Pi.<br />
** G19 Gaming Keyboard, works fine with no external power. Illumination with external power. Powered hum in back of keyboard works too.<br />
** G15 Gaming keyboard, as long as you press the backlight button twice to turn off the backlight (it says below it dosen't work with backlight on.<br />
** V470 Bluetooth Laser Mouse<br />
<br />
''Keyboards and mice also together with Unifying receiver'' <br />
<br />
* '''macally'''<br />
**macally iKey slim (IKEY5V2)<br />
<br />
* '''Microsoft''' <br />
**Microsoft Comfort Curve Keyboard 2000<br />
**Microsoft Comfort Curve Keyboard 3000 for Business<br />
**Microsoft Digital Media Pro Keyboard Model: 1031 (Debian 13-Apr-2012)<br />
**Microsoft Natural Ergonomic Keyboard 4000 (B) (Debian "Wheezy" beta 18-June-2012)<br />
**Microsoft Wired Keyboard 600 Model 1366 (Debian 28-May-2012 on Production Model B)<br />
**Microsoft Wireless Desktop 700 Keyboard v2.0 (Raspbian Pisces image 08-June-2012 on Production Model B)<br />
**Microsoft Wireless Photo Keyboard (Model 1027) Unifying receiver, no hub<br />
**Microsoft Wireless Natural Multimedia Keyboard (Raspbian Pisces 08-July-2012) (B)<br />
**Microsoft Windows 2000 Keyboard (KB-USBK110610)<br />
**[https://www.microsoft.com/hardware/en-us/p/wired-keyboard-600/ANB-00001 Microsoft Wired Keyboard 600]. The keyboard is rated at 5&nbsp;V/100&nbsp;mA (Wheezy 5-Sept-2012)<br />
<br />
* '''Mikomi''' <br />
** Wireless Deskset KM80545 Keyboard and mouse (it works, but the range is terrible less than a metre) (B)<br />
<br />
* '''Monoprice'''<br />
** [http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10404&cs_id=1040401&p_id=6854&seq=1&format=2|Monoprice PS/2 To USB Adapter] Directly and through an unpowered hub with a USB mouse plugged in.<br />
<br />
* '''Motorola'''<br />
<br />
** Bluetooth wireless ultra slim keyboard and mouse combo (sold as for the "Atrix" phone) work in combination with the Technika Bluetooth adaptor listed below<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/desktopkits/nov-wcombo.html|Novatech Wireless Combo - Keyboard & Mouse, Nano adapter] (B)<br />
<br />
* '''ONN'''<br />
**ONN Keyboard Stock No: ONA11HO089 (from Walmart). Seems to work fine, even without a hub.<br />
**ONN Keyboard Stock No: ONA11HO087 (from Walmart). Combination keyboard and mouse package with nano receiver. Be sure to configure keyboard layout.<br />
<br />
* '''Ortek'''<br />
** Ortek Technology, Inc. [http://www.ortek.com/html/pdt_view.asp?area=46&cat=150&sn=79 WKB-2000S] Wireless Keyboard with Touchpad works fine on Raspbian Wheezy and Raspbmc. Wireless USB receiver (device ID 05a4:2000) is recognised automatically. Connected directly to Raspberry Pi USB port, no powered hub used.<br />
<br />
* '''Perixx''' <br />
**Periboard 716 Wireless Ultra-Slim Keyboard with Touchpad (Debian 07-Jun-2012 on Production Model B)<br />
***(Raspbian Wheezy, 2012-12-16, Prod. Model B, Rev 2) Has the "sticky key" issue as reported by other users with other keyboards. Seems to be somewhat related to power when directly connected to the Pi. Using a 2A PS makes it MUCH better, but not completely fixed. When/if it happens again, unplugging and reinserting the USB dongle brings it back to normal. Did not try with powered USB hub.<br />
** PERIBOARD-502 wired keyboard inc built in touchpad (model B/Raspbian Wheezy)<br />
** Periduo-707 Plus (Wireless Keyboard and Mouse) works fine ''most'' of the time. Does suffer from dropouts and glitches though. Usual "drawing too much power from USB" problems show up as well - dropped key presses or constant autorepeats. These can be cured by pulling out and reinserting the dongle in the USB socket. The keyboard sometimes hangs after power on when used with my laptop - it seems to need 30 seconds of non-use before it works fine. Again, remove and insert the dongle cures it. Works fine vi my Benq monitor's USB Hub.<br />
<br />
* '''Philips''' <br />
**Wired Multimedia Keyboard SPK3700BC/97 (Debian 19-Apr-2012 on Production Model B)<br />
<br />
* '''Prodige'''<br />
**Nanox Wireless 2.4&nbsp;GHz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01]<br />
<br />
* '''Rapoo'''<br />
**Rapoo E9080 Wireless Ultra-Slim Keyboard with Touchpad<br />
**Rapoo Wireless Multi-media Touchpad Keyboard E2700 [http://www.rapoo.com/showdetails.aspx?P_No=E2700]<br />
**Rapoo Ultra-Slim Wireless Multimedia Keyboard and Mouse E9060 (works proper on powered USB Hub)<br />
<br />
*'''Riitek'''<br />
**RT-MWK03 mini wireless keyboard & trackpad<br />
**RT-MWK02+ mini Bluetooth keyboard & trackpad. Followed instructions from this page: [http://www.ctheroux.com/2012/08/a-step-by-step-guide-to-setup-a-bluetooth-keyboard-and-mouse-on-the-raspberry-pi/] and it worked, connection persists across reboots, no problem with either builtin USB or powered USB hub.<br />
**RT-MWK01 mini wireless 2.4&nbsp;GHz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
*'''Rosewill'''<br />
** RK-200 Standard Keyboard<br />
<br />
*'''Saitek'''<br />
** Eclipse II Backlit Keyboard PK02AU (B)<br />
** Eclipse Backlit Keyboard PZ30AV (B) - works fine when connected directly to Raspberry Pi rev.1 and 2 USB port. No powered hub used.<br />
** Expression Keyboard (US) <br />
** Cyborg V.5 (B)<br />
<br />
*'''SelecLine'''<br />
** WK11P & WM11P-SP-PP. Keyboard and mouse set. (B)<br />
<br />
*'''SIIG'''<br />
** SIIG Wireless Multi-Touchpad Mini Keyboard 02-1286A v1.0 (B)<br />
<br />
*'''Silvercrest'''<br />
** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B) <br />
<br />
*'''SolidTek'''<br />
** Solid Tek KB-P3100BU ASK-3100U. <br />
<br />
*'''Sony'''<br />
** Keyboard for PlayStation 2 (PS2) Linux. Works without powered hub with 5&nbsp;V 1&nbsp;A supply, requires manual keyboard remapping with Debian Squeeze to USA 101-key layout.<br />
<br />
* '''SteelSeries'''<br />
** Merc keyboard (B)<br />
<br />
* '''Sun Microsystems'''<br />
** Model: Type 7, SUN PN: 320-1348-02 (Danish key layout)<br />
** Model: Type 6, SUN PN: 320-1279-01 (Danish key layout)<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/keyboards/KB060UK/ KB060UK] Wired Multimedia Keyboard<br />
<br />
* '''Technika'''<br />
** WKEY03 (B)<br />
** TKD-211<br />
<br />
* '''Tesco'''<br />
** Value Keyboard VK109 (B)<br />
** Multimedia K211 Wired Keyboard (B)<br />
<br />
*'''The Pi Hut'''<br />
** Super Slim Apple Style Keyboard (from [http://thepihut.com/products/usb-keyboard-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Apple Style Keyboard Set (Keyboard & Mouse) (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust [http://trust.com/17585 17585] Wireless Deskset (mouse and keyboard) (17585-02) No hub needed.<br />
** Trust [http://trust.com/17916 17916] Compact Wireless Entertainment Keyboard http://www.trust.com/products/product.aspx?artnr=17916 (B)<br />
** Trust [http://trust.com/17184 17184] ClassicLine Keyboard <br />
** Trust [http://trust.com/16087 16087] Camiva MultiMedia Keyboard http://trust.com/products/product.aspx?artnr=16087<br />
** Trust [http://trust.com/17603 17603] Convex Keyboard http://trust.com/products/product.aspx?artnr=17603 tested Debian 6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
** Trust [http://trust.com/18007 18007] Tocamy Wireless Entertainment Keyboard. Tested with raspbian and powered USB HUB.<br />
<br />
* '''Unbranded'''<br />
** AK-601 Wireless Mini Keyboard and Trackball (with laser pointer) - sourced from eBay Chinese seller<br />
<br />
* '''Unicomp'''<br />
** USB Endurapro - keyboard and trackpoint work perfectly from powered hub<br />
<br />
* '''Q-Connect'''<br />
** AK-808 (B)<br />
<br />
* '''Xenta'''<br />
** 2.4&nbsp;GHz Wireless Multimedia Entertainment Keyboard with Touchpad (B)<br />
** Mini Multimedia Keyboard (Model no.: 808M) (B)<br />
<br />
===Problem USB Keyboards===<br />
<br />
Note that generally PS/2 keyboards with an USB adapter will not work directly on a Raspberry Pi port, due to the fact that PS/2 keyboards are designed for normal 5&nbsp;V +-5% range, while USB keyboards must be designed to work with 4.4 Volt, and generally USB devices on the Raspberry Pi may receive less than 4.75 Volt. PS/2 + USB adapter keyboards might work behind a powered hub, which does provide the full 5.0&nbsp;V. Some of these keyboards work when running the latest Raspbian, but not when using the overclocked XBMC version of Raspbmc, probably due to the overclocking drawing more power away from the rest of the support system devices.<br />
<br />
* '''A4 Tech'''<br />
** Model GL-6 USB Keyboard, 20&nbsp;mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''Accuratus'''<br />
** Accuratus KYBAC100-101USBBLK causes kernel panic (rated 100&nbsp;mA). Tested with 1000&nbsp;mA cheap unbranded and Nokia 1200&nbsp;mA power adaptors.<br />
* '''Apple'''<br />
** [http://www.powerbookmedic.com/xcart1/images/D/apple-keyboard.jpg Apple Keyboard (109 keys) A1048]. Draws too much power and does not seem to work properly when plugged into a powered hub. <br />
*'''Argos'''<br />
** Argos Value Wired Keyboard causes kernel panic<br />
* '''Choidy'''<br />
** Identifiers from usb-devices: Vendor=1a2c ProdID=0002 Rev=01.10 Product=USB Keykoard (yes, 'Keykoard') causes kernel panic<br />
* '''Cit''' <br />
** KB-1807UB Causes kernel panic (rated <200&nbsp;mA)<br />
* '''Dell'''<br />
** SK-8135 (B) (Rated 1.5&nbsp;A. Takes too much power from Raspberry Pi even when not used as USB hub. Symptom = repeated keystrokes)<br />
** SK-8115 causes kernel panic (rated 100&nbsp;mA) Debian 6-19-04-2012 (B)<br />
** Y-U0003-DEL5 Sticky / Non-responsive keys<br />
** Wireless Trackball Keyboard with trackball - problem sticky keys definitely not power issue as the dongle works even at 3V<br />
* '''Gear Head'''<br />
** KB2300U - Causes kernel panic (B)<br />
** KB3800TPW - Wireless Touch Touchpad Keyboard - Wireless dongle disrupts USB and ethernet whether direct or on powered hub, no keyboard/mousepad response in Raspbian (logged in syslog) or Raspbmc (no logs written)(B)<br />
* '''GMYLE'''<br />
** Wired USB Slim Chocolate Multimedia Media Typing Keyboard With 3 USB Port hub (B) - Kernel Panic on startup if plugged in. If plugged in at login prompt then freeze. [http://www.amazon.co.uk/gp/product/B0067EC3GW/]<br />
* '''Inland''' <br />
** Inland USB Keyboard Model #70010<br />
* '''Jeway'''<br />
** JK-8170 "The Hunter" - causes kernel oops (Debian6-19-04-2012) (B)<br />
* '''Labtec'''<br />
** ultra-flat wireless desktop USB - Keyboard has 'sticky' keys. Tested both debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
* '''Logik'''<br />
** Wired Multimedia Keyboard Model: LKBWMM11 - causes kernel panic (on Debian 190412 distro) (B)<br />
** Wired Ultra Slim Keyboard Model: LKBWSL11 - causes USB power issues. Not reliable. Causes other USB devices to fail (B) >> '''This is also listed under Working USB Keyboards??'''<br />
* '''Logitech'''<br />
** Logitech Illuminated Keyboard (unstable; not working with led light on; tested both US and NO layouts with both Apple iPad 2 and Asus TF-101 USB chargers)<br />
** G110 Gaming Keyboard - only works with illumination off, otherwise unresponsive. Once failed it needs reconnecting before another attempt. (B)<br />
** G15 Gaming Keyboard - LCD and key backlights flicker, 95% unresponsive to typing. I don't know of a way to turn the illumination off. (B)<br />
** K360 Wireless Keyboard - Occasional sticky keys. (B)<br />
** MK 260 Wireless Keyboard - Occasional sticky keys. (B)<br />
** K400 wireless keyboard with touchpad (completely non-functional on debian6-19-04-2012)<br />
** G510 Gaming Keyboard - lagging or unresponsive keys.<br />
** MX5500 wireless keyboard and mouse with USB Bluetooth reciever - Unstable, looses connection without prior notice<br />
** EX100 Cordless Desktop, wireless keyboard and mouse. Mouse and keyboard hangs every few minutes (with or without hub).<br />
* '''Microsoft''' <br />
** Wireless Desktop 800 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Entertainment Keyboard - No key input recognized (possibly connectivity issue as pairing devices does not seem to work)<br />
** Wireless Optical Desktop 1000 - Keyboard has 'sticky' keys (B)<br />
** Wireless Keyboard 2000 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Desktop 3000 - Keyboard has 'sticky' keys.<br />
** Arc wireless - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X4 - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X6 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Comfort Keyboard 5000 - Keyboard has 'sticky' keys. (B)<br />
** Razer Reclusa - Keyboard has 'sticky' keys. (B rev 2.0)<br />
** Wired Keyboard 600 Model 1366 (B) (no power to keyboard, RPi powered by a 1000&nbsp;mA power supply unit)<br />
* '''Novatech'''<br />
** NOV-KEY2 - Causes kernel panic (B)<ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
* '''PC World Essentials'''<br />
** PKBW11 Wired Keyboard - no power to keyboard, no error messages on both Arch 29-04-2012 and Debian6-19-04-2012, the same Raspberry Pi works with Asda keyboard. Me too, but it caused a kernel panic -- tested on powered hub and direct.<br />
* '''Razer'''<br />
** Razer Tarantula gaming keyboard - sticky keys, could be power issue as is programmable with host powered USB hub and audio jacks.<br />
** Razer BlackWidow - Sticky keys, could be a power related issue due to illuminated logo (Blue LED).<br />
** Razer Arctosa - Sticky keys, most probably power related issue since it states it's rated at 5&nbsp;V 500&nbsp;mA. (B)<br />
* '''SIIG'''<br />
** Wireless Ultra Slim Multimedia Mini Keyboard JK-WR0612-S1 - Unresponsive and sticky keys.<br />
* '''Texet'''<br />
** MB-768B standard keyboard (Rated 5&nbsp;V 1.5&nbsp;A (!), so probably too much power drain. Kernel panic, Debian6-19-04-2012)<br />
* '''Trust''' <br />
** TRUST GXT 18 Gaming Keyboard - No power to keyboard, could be a driver issue - no error messages.<br />
* '''Unbranded'''<br />
** Compuparts<br />
** model no. HK-6106 (B) <ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
** LK-890 (Multimedia keyboard & Optical Mouse) - kernel panic on Debian Squeeze, ArchLinux and Qtonpi.<br />
* '''Verbatim'''<br />
** [http://www.amazon.com/gp/product/B004LB5AKY/ref=oh_details_o00_s00_i02|Verbatim 97472 Mini Wireless Slim Keyboard and Mouse] - Keyboard has lagging, unresponsive and sticky keys issues. (Tested with and without powered USB hub.)<br />
* '''Wilkinsons / TEXET'''<br />
** Model MB-768B causes kernel panic on debian6-19-04-2012.<br />
* '''Xenta'''<br />
** HK-6106 - causes kernel panic (on Debian 190412 distro)(B)<br />
** Multimedia Wireless Keyboard and Mouse Set (Keyboard Model: HK3518B + Mouse Model HM3301) (B) - occasional sticky keys, and occasional complete lock-up<br />
<br />
== USB Mouse devices ==<br />
USB mouse devices that present themselves as a standard HID (Human Interface Device) device should work, however some hardware requires special drivers or additional software, usually only compatible with Windows operating systems. <br />
<br />
===Working USB Mouse Devices===<br />
The following is a list of specific mouse devices known to work and which appear to be fault-free.<br />
<br />
* '''A4Tech'''<br />
** OP-530NU Padless Wired Mouse<br />
<br />
* '''Apple'''<br />
** Apple Mighty Mouse (Model No. A1152): Works well with the exception of the scroll ball only transmitting vertical scrolling (This seems to be an issue of driver that was designed to support scroll wheels).<br />
<br />
* '''Asda'''<br />
** HM5058 (Smart Price) Wired Mouse<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''ASUS'''<br />
** MS-511U (comes with Asus Vento KM-63 keyboard/mouse combo) (B)<br />
** MG-0919 (wireless)<br />
<br />
* '''Belkin'''<br />
** F8E882-OPT (B)<br />
<br />
* '''Cellink'''<br />
** OPM-602 Small wireless optical mouse<br />
<br />
* '''Cerulian Technology'''<br />
** 3 Button Mini Mobile Blue Trace Mice - Model:N96JA<br />
<br />
* '''Dell'''<br />
** M-UVDEL1 (B)<br />
** MOC5UO (100&nbsp;mA)<br />
** M056U0A (B)<br />
** DZL-MS111-L (B) (100&nbsp;mA)<br />
** MS-111P (100&nbsp;mA)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500&nbsp;mA, but it works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Dynex'''<br />
** DX-WMSE (100&nbsp;mA) (B)<br />
<br />
* '''Fellowes'''<br />
** 99928 USB Micro Track Ball (works without a hub, directly plugged in) (B)<br />
<br />
* '''Filand'''<br />
** OP-102i Mini Optical Mouse<br />
<br />
* '''Genius'''<br />
** GM-04003A (B)<br />
** Slimstar 8000 wireless mouse (Can be intermitent. Mouse pointer sometimes is irratic.)<br />
** Traveler 515 Laser<br />
<br />
* '''HP'''<br />
** MN-UAE96 (The basic stock HP wired mouse)(B)<br />
<br />
* '''iConcepts'''<br />
** 2.4&nbsp;GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''Kensington'''<br />
** Kensington Expert Mouse Trackball K64325<br />
** Kensington Expert Mouse "Slimblade" K72327US<br />
<br />
* '''Labtec'''<br />
** Corded Laser Glow Mouse 1600, rated 5&nbsp;V 100&nbsp;mA (P/N 810-000819, M/N M-UAZ149, PID GT83401)<br />
<br />
* '''Lenovo'''<br />
** Wired Optical Mouse Model: MO28UOL<br />
<br />
* '''Logik'''<br />
** Wired Optical Glow Mouse Model: LGGMO10. (B)<br />
<br />
* '''Logitech'''<br />
** Anywhere MX Wireless Mouse - works fine with same unifying receiver as K400 keyboard/mousepad (quake3 is easier w/mouse than mousepad)<br />
** B105 Mouse for Laptops (OEM)<br />
** Cordless Pilot Optical Mouse M/N M-RR95 with Cordless Mouse Receiver M/N C-BA4-MSE<br />
** G5 Logitech Gaming Mouse (B)<br />
** G5v2 Logitech Gaming Mouse (B)<br />
** G500 Logitech Gaming Mouse (B)<br />
** G700 Logitech Wireless Gaming Mouse (B)<br />
** LX-700 Cordless Desktop Receiver (B)<br />
** LX 710 Wireless Mouse - works fine with receiver plugged directly into Raspberry Pi (accompanying keyboard works fine too).<br />
** M90 optical mouse<br />
** M185 Wireless Mouse (B)<br />
** M210 (part of the MK260 set) (B)<br />
** M305 Wireless Mouse<br />
** M310 Cordless Mouse<br />
** M325 Wireless Mouse<br />
** M505 USB wireless laser, model no: 910-001324 (B)<br />
** M510 Wireless Mouse (B)<br />
** M705 Marathon Mouse (Unifying receiver, no powered hub) (B)<br />
** M-BD58 Wheel Mouse (B)<br />
** M-BJ58/M-BJ69 Optical Wheel Mouse (B)<br />
** M-BJ79 (B)<br />
** M-BT96a Optical Mouse<br />
** MX320/MX400 laser mouse (B)<br />
** MX518 Optical wheel mouse (B)<br />
** Optical USB Mouse (M/N 931643-0403)<br />
** Performance Mouse MX (B)<br />
** MX Revolution (B) (Debian "Wheezy" beta 18-June-2012)<br />
** VX Nano Cordless Laser Mouse for Notebooks<br />
** Wheel Mouse (M/N BJ58)<br />
<br />
* '''Medion'''<br />
** Mini mouse Model M101-CBJ P/N 40016632 S/N 7BFSA00003445 rated 5&nbsp;V 100&nbsp;mA. Works fb on model B with Raspbian Wheezy<br />
<br />
* '''Microsoft''' <br />
** Comfort Curve Mouse 3000 for Business<br />
** Comfort Mouse 6000 (works when directly connected to Raspberry Pi (B). Does not work when connected through USB Hub (mouse pointer intermittent).<br />
** Compact optical mouse 500 V2.0 (B)<br />
** Wheel Optical Mouse (wheel and additional buttons not tested) (B)<br />
** Microsoft Intellimouse Optical Mouse<br />
** Microsoft Wireless Laser Mouse 8000<br />
** Microsoft Wireless Mobile Mouse 1000<br />
** Microsoft Wireless Mobile Mouse 3500<br />
** Microsoft Wireless Mobile Mouse 4000<br />
** Microsoft Wireless Mouse 700 v2.0<br />
** Microsoft Comfort Mouse 4500<br />
** Wireless IntelliMouse Explorer 2.0 (unifying receiver, no hub)<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-mouser.html|Novatech M1 USB Mouse - Wired](B)<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-dl10.html|Novatech DL10 Wireless Mouse] (B)<br />
<br />
* '''Perixx'''<br />
** PERIMICE-210 U Red (Part No.R1J) <br />
<br />
* '''Razer'''<br />
** Boomslang Collectors Edition 2007 (B)<br />
<br />
* '''Rosewill'''<br />
** Rosewill RM-C2U<br />
<br />
* '''Saitek'''<br />
** Notebook Optical Mouse (PM46)<br />
<br />
* '''Samsung'''<br />
** Samsung model:AA-SM3PCPB USB Optical Mouse (draws 50&nbsp;mA) <br />
<br />
* '''Sun microsystems'''<br />
** Model: FID-638 , SunPN: 371-0788-01<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/optical-mice/MI015/ MI015]<br />
<br />
* '''Swiftpoint'''<br />
** [http://http://www.americas.futuremouse.com/] Swiftpoint Mini Wireless Optical Mouse. Does not require any special drivers. Haven't confirmed if charging the mouse requires a powered USB hub or not.<br />
<br />
* '''Targus'''<br />
** AKM02UK (Associated keyboard not checked)<br />
** AMU2701EUK (B)<br />
<br />
* '''Technika'''<br />
** TKOPTM2 (B)<br />
**TKD-211<br />
**TKNM110<br />
<br />
* '''Tesco'''<br />
** Wired optical mouse M211 (B)<br />
<br />
*'''The Pi Hut'''<br />
** USB Mouse for Raspberry Pi (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Keyboard & Mouse Set (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Model 15313 - large, 5-button wirless mouse<br />
** Model 15349 - small, wireless notebook mouse - wireless dongle turns mouse off when "parked" in its base<br />
** Trust Nanou Wireless Micro Mouse http://trust.com/products/product.aspx?artnr=17087<br />
<br />
* '''Verbatiam'''<br />
**Mini Nano Optical Mouse 97470 (wireless on non-powered three USB dongle hub) (B)<br />
<br />
* '''Xenta'''<br />
** MOW0810 (B)<br />
** Wired Optical Mouse (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Generic'''<br />
** Generic 2.4&nbsp;GHz Wireless Mouse (ID 040b:2013 Weltrend Semiconductor) (B)<br />
<br />
===Problem USB Mouse Devices===<br />
The following is a list of specific mouse devices that have problems working with the Raspberry Pi<br />
* '''A4Tech'''<br />
** Model G7-630 Wireless Mouse, 20&nbsp;mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''HP'''<br />
** HP Retractable Mobile Mouse (Optical) HP Product Number XP472AA - errors / boot loop RASPBMC (B)removed mouse, started with no further errors. <br />
<br />
* '''Logik'''<br />
** Logik IMF Blue Trace Wired USB mouse (Model LMWBLU11) - disconnects from the USB port every 20 seconds when using the Raspian distro. Always reconnects to the USB port successfully (B)<br />
<br />
* '''Logitech'''<br />
** Logitech G400 Gaming Mouse - 100% CPU load and laggy mouse cursor when the mouse is moved. MX518 works fine on the same setup, so I suspect it's a polling rate issue. [http://tech2.in.com/reviews/mice/logitech-g400-is-it-a-worthy-successor/231012 this] says the mouse is 1000&nbsp;Hz out of the box, whereas the 518 is only 125&nbsp;Hz. Solution found: add usbhid.mousepoll=8 to the kernel commandline.<br />
<br />
* '''Microsoft'''<br />
** Microsoft Touch Mouse - Does not see right clicks, Only left.<br />
** Microsoft Sidewinder X8 - Uses far too much power, if it works then only for a short time!.<br />
<br />
* '''Razer'''<br />
** Naga Wired USB mouse - the mouse seems to present itself as a keyboard because the numpad on the left-hand side of the device works, but the cursor doesn't move.<br />
<br />
* '''Roccat'''<br />
** Kone[+] Wired USB mouse - Nothing happens when moving the mouse, haven't looked further into the issue (B)<br />
<br />
* '''Trust'''<br />
** Optical USB Mouse MI-2250 - Nothing happens when moving the mouse (B)<br />
<br />
* '''Xenta'''<br />
** Multimedia Wireless Keyboard and Mouse Set (Mouse Model: HM-3301) (B) - frequent lost connection giving stuttering mouse cursor indicating USB current not enough for dongle<br />
<br />
== USB Real Time Clocks ==<br />
*Cymbet<br />
** Cymbet CBC-EVAL-06 USB Real Time Clock (FT2232 to SPI to RV-2123)<br />
Device information at http://www.cymbet.com/pdfs/DS-72-22.pdf<br />
Code to access the RTC from Linux: https://github.com/owendelong/Cymbet-RTC<br />
Does not require a powered hub.<br />
<br />
== USB Wi-Fi Adapters ==<br />
<br />
See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing<br />
<br />
There is a howto on installing the TL-WN722N adapter [http://elinux.org/RPi_Peripherals#Wireless:_TP-Link_TL-WN722N_USB_wireless_adapter_.28Debian_6.29 here], which also acts as a guide for installing others too.<br />
<br />
===Working USB Wi-Fi Adapters===<br />
<br />
These adapters are known to work on the Raspberry Pi. This list is not exhaustive, other adapters may well work, but it has not yet been tried.<br />
<br />
'''Note:''' A Wi-Fi adapter will probably need more power than the Raspberry Pi USB port can provide, especially if<br />
there is a large distance from the Wi-Fi adapter to the Wi-Fi Access Point. Therefore, you may need to plug the Wi-Fi adapter into a powered USB hub.<br />
<br />
* '''3COM'''<br />
** 3CRUSB10075: ZyDAS zd1211rw chipset (!)<br />
<br />
* '''7DayShop'''<br />
** W-3S01BLK, W-3S01BLKTWIN: Unbranded product available from 7DayShop, in a single or twin pack. [http://www.7dayshop.com/catalog/product_info.php?cPath=777_9&products_id=112046], [http://www.7dayshop.com/catalog/product_info.php?&products_id=112527]. Tested on Debian Wheezy, with the dongle attached directly to the Raspberry Pi along with the wireless keyboard receiver. Shows up as a Ralink RT5370 device, and no drivers or additional software downloads required. Created wpa.conf, edited 'interfaces' file and restarted the networking. The manufacturer portion of the MAC address (7cdd90) is assigned to "Shenzhen Ogemray Technology Co., Ltd."<br />
** It works without additional software connected directly to a Rev 2 Raspberry Pi, but it stops working after a period of time (3 to 4 hours) with a fully updated Wheezy and all the 'USB workarounds' [http://elinux.org/Rpi_USB_check-list] in place. <br />
<br />
* '''Alfa'''<br />
** AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware package)<br />
** AWUS036NH: Tested on Arch Linux ARM using the rt2800usb module.<br />
** AWUS036NH: Tested on Debian Wheezy (with Ralink firmware package). Tested on Raspbian too (drivers from aircrack-ng).<br />
** AWUS036H (500&nbsp;mW version): Tested on Raspbian (drivers from aircrack-ng).<br />
** AWUS036H (1&nbsp;W version): Tested on Raspbian (drivers from aircrack-ng). Needs USB powered HUB or Rev2 of the board / polyfuse bypass.<br />
** AWUS036NHA: Tested on Raspbian (drivers from aircrack-ng). Works fine if connected after boot, otherwise Raspberry Pi won't boot up.<br />
<br />
* '''AirLink101''' [[File:Airlink101.jpg|thumb|right|link=http://www.savagehomeautomation.com/raspi-airlink101|100px|Airlink 101 Wireless N 150 Ultra Mini-USB Adapter]]<br />
** AWLL5088: Tested on Debian Wheezy. This adapter is based on the OEM Edimax EW-7811Un. For automatic installation, See MrEngmanns script listed below under the Edimax device.<br />
** AWLL5099: Tested on Raspian Wheezy. [http://www.savagehomeautomation.com/raspi-airlink101 Step-by-step installation and configuration instructions] with screenshots can be found [http://www.savagehomeautomation.com/raspi-airlink101 here]. This adapter is based on the Realtek RTL8188CUS chipset. The rtl8192cu kernel driver is loaded automatically in the latest Raspian distribution.<br />
** [http://www.airlink101.com/products/awll6075.php AWLL6075]: Tested on Raspian Wheezy 16-Dec-2012 build and distro upgrade as of 09-Jan-2013. lsusb reports: 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter. Driver installed is r8712u. Powers OK from Model B Pi (Rev 000f) USB port (1200mA supply tested). Dongle does get hot under use when directly connected to USB port (slightly reduced when USB extender cable used).<br />
<br />
* '''Asus'''<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N10] USB ID 0b05:1786, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware - Realtek from non-free Squeeze repository (B) (not needed with latest Raspbian “Wheezy” 2012-07-15: this Asus works N10 out of the box) Does not support nl80211 APIS, so hostapd won't work.<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N13] USB ID 0b05:17ab, works with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1 image] as it includes kernel [http://www.element14.com/community/message/57635#57660 with 8192u driver built-in] (B)<br />
** WL-167G v1 USB ID 0b05:1706, Ralink RT2571 working out-of-the-box on Debian image from 2012-04-19. Requires powered hub, otherwise it is detected by OS, but it will not function.<br />
** WL-167G v3 USB ID 0b05:1791, working out-of-the-box on Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17. Does not require powered hub.<br />
<br />
* '''AusPi Technologies'''<br />
** AusPi Wireless Adapter [Realtek RTL8188S]. Works without a powered HUB. Tested on OpenELEC (works OOB), RaspBMC (works OOB), XBian (works OOB) and 2012-08-08 Raspbian Wheezy (works OOB). Distributed in Australia by [http://www.buyraspberrypi.com.au/raspberry-pi-802-11bgn-usb-wireless-dongle/ Buy Raspberry Pi Australia].<br />
<br />
* '''Belkin'''<br />
** Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]. On Debian requires the firmware-ralink package from the non-free repository. The usbcore module needs to be added to /etc/modules [http://www.penguintutor.com/blog/viewblog.php?blog=6281 install instructions].<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Tested on OpenELEC (works OOB), RaspBMC (works OOB), Raspian - 2012-07-15-Wheezy-raspbian '''Powered hub required!'''<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Works on RaspBMC OOB (with NetworkManager plugin). Works WITHOUT powered hub on 5&nbsp;V 800&nbsp;mA power with 6 overvolt (nothing else connected to USB)<br />
** Belkin Components F7D1101 v1 Basic Wireless Adapter [Realtek RTL8188SU] USB ID 050d:945a, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware - Realtek from non-free Squeeze repository (B). Verified working with 2012-12-16-wheezy-raspbian right out of the box.<br />
**Belkin Components F6D4050 V1 [Realtek RT3070] USB ID: 050d:935a Driver: RT3572STA(recommended),RT2800USB,RT2870STA. Tested under Arch using [https://wiki.archlinux.org/index.php/Setting_Up_Belkin_F6D4050_Wireless_USB_Dongles this] guide.<br />
**Belkin Components F6D4050 V1/V2 [Realtek RT3070] USB ID: 050d:935a / 935b Driver: RT3572STA. Tested with Raspbian - See [http://iggy82.blogspot.co.uk/2012/08/wireless-n-raspberry-pi-belkin-f6d4050.html installation instructions] - Powered hub not required!<br />
** Belkin Components F7D2102 "N300" Micro Wireless USB adapter. Tested with Occidentalis 0.1. Tested and working on Rasbian Wheezy (and RaspBMC), driver RTL8192CU, no powered hub needed (dongle directly attached to the onboard ports)<br />
** Belkin Components F9L1001v1 "N150" Wireless USB Adapter. Tested and working on Rasbian Wheezy WITHOUT powered hub. <br />
** Belkin Surf Micro WLAN USB-Adapter (Raspbian Wheezy, unpowered hub, "N150")<br />
<br />
* '''BlueProton'''<br />
** [http://www.element14.com/community/docs/DOC-44703 BT3] USB ID: 0bda:8187; tested on Debian, Fedora & Arch; rtl8187 driver (B)<br />
<br />
* '''Buffalo'''<br />
** USB ID: 0411:01A2 WLI-UC-GNM - Tested on Raspbmc; rt2800usb driver <br />
** USB ID: WLI-UC-G300N - Works on Raspbmc out of the box. Tested after a factory reset of the Raspbmc.<br />
<br />
* '''Comfast'''<br />
** WU710N: chipset RTL8188CUS. The rtl8192cu kernel driver is loaded automatically in the latest Raspian distribution. <br />
** WU810N (150M): Works out of the box on wheezy raspbian of version 2012-12-16. <br />
<br />
* '''Conceptronic'''<br />
** C300RU. Works out of the box in Raspbian. Causes reboot when plugging on a live Rev. 2 Raspberry Pi<br />
<br />
* '''Conrad'''<br />
** WLAN Stick N150 mini. Works out of the box in OpenELEC, [http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/ requires firmware - Realtek and r8712u kernel module on Debian].<br />
** WLAN Stick N150 Nano [Realtek RTL8188CUS]. Requires a powered USB hub. See Micronet SP907NS for installation instructions and script.<br />
<br />
* '''DealExtreme'''<br />
** ISG-1507N Mini USB 2.4GHz 150Mbps 802.11b/g/n WiFi. Has the ralink 5370 chipset, works directly plugged into the Raspberry Pi rev.1 under OpenELEC. Note: Driver (rt2800usb) only permits B/G operation and throughput is low (10Mbit).<br />
<br />
* '''DELL'''<br />
** Wireless 1450 [Intersil ISL3887]. Works out of the box, but it requires a powered hub (the Raspberry Pi boots with this dongle plugged in, recognizes and configures it, works for some time, but then it crashes randomly under heavy traffic. A powered hub seems to fix the issue).<br />
<br />
* '''DIGICOM'''<br />
** USBWAVE54 [chipset Zydas ZD1211] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave54]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/Wheezy works with zd1211-firmware . <br />
** USBWAVE300C [chipset Ralink 2870] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave300c]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/Wheezy works with firmware-ralink . <br />
<br />
* '''D-Link'''<br />
** AirPlus G DWL-G122 (rev. E). USB ID 07d1:3c0f, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>Squeeze-firmware</code> non-free repository. (However I experience total crashes on Raspbian 2012-07-15 after a few minutes of load on the WLAN. Will have to investigate via serial console.)<br />
** AirPlus G DWL-G122 (rev. C). USB ID 07d1:3c03, Ralink RT2571. Working out-of-the-box on Arch image from 2012-04-29.<br />
** AirPlus G DWL-G122 (rev. B1). USB ID 2001:3c00, Ralink RT2571. Working out-of-the-box on Arch image from 2012-06-13.<br />
** DWA-110 (Version A1). Requires the ralink package from the non-free repository on Debian.<br />
** DWA-121 (Version A1). Wireless N 150 Pico. Works out-of-the-box with Raspian Wheezy (2012-09-18) and Raspbmc (2012-11-06) using Network-Manager addon (see Program - Addons)<br />
** DWA-123 (Version A1). USB ID 2001:3c17, Ralink RT2800. Working out-of-the-box on Arch image from 2012-04-29. (working without UBS Hub - not yet sure if it achieves full speed though.)<br />
** DWA-131 USB ID 07d1:3303,Realtek RTL8192SU, 802.11n Wireless N Nano. Works out of the box on Raspbian “Wheezy”. Verified with direct USB: no powered USB hub needed. Also verified when Nano used in powered USB hub. Someone had trouble configuring SSID/Passphrase in etc/network/interfaces file. But no problem & very easy to configure using wicd: wicd is a gui interface on LXDE for network configuration. Install it using command-line: <code>apt-get install wicd</code>. Once configured ith wicd to auto-run on boot, no need to turn back to LXDE. Recommended.<br />
** DWA-140 (Version B1). USB ID 07d1:3c09, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>Squeeze-firmware</code> non-free repository.<br />
** DWA-140 (Version B2). USB ID 07d1:3c0a, Ralink RT3072. Workaround for faulty firmware binary: Place file rt2870.bin from [https://launchpad.net/ubuntu/oneiric/+source/linux-firmware/1.53/+files/linux-firmware_1.53.tar.gz linux-firmware_1.53.tar.gz] in /lib/firmware. [https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/770232 Explanation].<br />
** DWA-160 (Version B1). USB ID 07d1:3c11, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>Squeeze-firmware</code> non-free repository.<br />
** DWA-160 (Version A2). USB ID 07d1:3a09, Atheros AR9170. (NOTE: I can only get it to work through powered USB hub) requires carl9170-fw firmware [http://http://aur.archlinux.org/packages.php/packages.php?ID=44102]<br />
** WUA-1340 (Version A1). Works with Raspbian Wheezy after installing the firmware-ralink package from the non-free repository on Debian.<br />
<br />
* '''Edimax''' [[File:Edimax-ew-7811un.jpg|thumb|right|link=http://www.savagehomeautomation.com/raspi-edimax-ew-7811un|100px|Edimax EW-7811Un 150 Mbps Wireless 11n Nano Size USB Adapter]]<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] USB ID 7392:7811, RTL8192CU, driver blob [http://www.electrictea.co.uk/rpi/8192cu.tar.gz download] via [http://www.element14.com/community/docs/DOC-44703 Element14], works with WPA2-AES-CCMP ([http://www.ctrl-alt-del.cc/2012/05/raspberry-pi-meets-edimax-ew-7811un-wireless-ada.html howto]) (B) - [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Alternative driver download link that works with Raspian]. <b>Note:</b> With current Raspbian (2012-09-18-Wheezy) it is recognized immediately, the default module works fine; the configuration is easy using wireless-essid and wireless-key in /etc/network/interfaces.<br />
*** The EW-7811Un can be powered directly from the Raspberry Pi if the Raspberry Pi is powered using a well regulated power supply.<br />
*** EW-7811Un [http://www.savagehomeautomation.com/raspi-edimax-ew-7811un step-by-step installation and configuration instructions] for Debian & Raspian with screenshots can be found here: [http://www.savagehomeautomation.com/raspi-edimax-ew-7811un here] <br />
*** A script-based installation for the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] by MrEngman can be found [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=26&t=6256&hilit=edimax on the Raspberry Pi forums]. Tested with Debian Squeeze and Raspbian. [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt An installation guide can be found here.]<br />
*** Instructions for getting the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] working in Raspbmc (tested RC3) can be found [http://forum.stmlabs.com/showthread.php?tid=780 here].<br />
*** Simple step-by-step instructions for [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] which uses the RTL8192 chipset [[RPi_edimax_EW-7811Un]]<br />
*** EW-7811Un[USB ID 7392:7811](Raspbian Wheezy, 2012-12-16, Prod. Model B, Rev 2) Worked right out of the box - only needed to configure WPA. <br />
(B)<br />
** [http://www.edimax.com/en/produce_detail.php?pd_id=8&pl1_id=1&pl2_id=44 EW-7318USg] USB ID 148f:2573, rt73usb. RT2573 chipset. Works with powered usb-hub or shorted polyfuses.<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=261&pl1_id=1&pl2_id=44 EW-7711UAn], Ralink RT2870, works perfectly on Arch with a powered hub (not tested without yet). Simply required wireless_tools and wpa_supplicant, the drivers/firmware are included in kernel 3.0. I followed the Arch [https://wiki.archlinux.org/index.php/Wireless_Setup Wireless Setup] instructions.<br />
<br />
* '''edup'''<br />
** [[http://www2.buyincoins.com/details/usb-150m-wifi-wireless-lan-network-card-adapter-antenna-product-1916.html Edup 150MBPS Wi-Fi adapter]] USB ID: 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to install the firmware as rt2870.bin in /lib/firmware.([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from Wheezy]) (B)<br />
** [http://dx.com/p/ultra-mini-nano-usb-2-0-802-11n-150mbps-wifi-wlan-wireless-network-adapter-48166?item=1&Utm_rid=24958662&Utm_source=affiliate Ultra-Mini Nano USB 2.0 802.11n 150&nbsp;Mbit/s Wi-Fi/WLAN Wireless Network Adapter] USB ID: ID 0bda:8176 Works stable when using VLC for internet radio receiver. Works stable 24/7 on two of my Raspberries used as webserver. Use method shown [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=7471&p=91736 here] for Debian. Seems to be the same as EW-7811Un using the RTL8188CUS chipset.<br />
<br />
** [http://www.szedup.com/show.aspx?id=1681 edup nano EP-N8508] Use method shown [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=7471&p=91736 here] for Debian. Requires powered USB hub for adequate power. When directly powered by Raspberry Pi, it fails after a few minutes. (B) Unusable with analog audio because when data is being send or recieved the audio get disorted. Use script from [http://dl.dropbox.com/u/80256631/install-wheezy-beta-rtl8188cus-20120619.sh here] for Wheezy.<br />
<br />
* '''Eminent'''<br />
** EM4575 - rt2800usb driver.<br />
<br />
* '''EnGenius'''<br />
** EUB9603 EXT - Realtek r8712u driver <br />
<br />
* '''Gigabyte'''<br />
** Gigabyte GN-WB32L 802.11n USB WLAN Card. Works with the rt2800usb driver.<br />
<br />
* '''GMYLE'''<br />
** Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.<br />
<br />
* '''IOGear'''<br />
** [http://www.element14.com/community/docs/DOC-44703 GWU625] USB ID 0bda:8172, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian Squeeze and install firmware - Realtek from non-free Squeeze repository. No need to download firmware when using Debian Wheezy (B)<br />
<br />
* '''ISY'''<br />
** USB Wireless Micro Adapter IWL 2000, tested on Raspbian; follow [http://daniel-lnx.blogspot.nl/2013/01/raspberry-pi-and-isy-usb-wireless-micro.html these] instructions.<br />
<br />
* '''Linksys'''<br />
** Linksys (Cisco) WUSB100 ver.2 1737:0078, tested on Raspbian; follow [http://www.brucalipto.org/linux/the-raspberry-diary-wusb100-wireless-n/ Brucalipto.org] instructions; not stress tested, but it works without issues for light network load.<br />
** Linksys (Cisco) WUSB600N, test on Raspbian, details [http://elibtronic.ca/content/20120731/raspberry-pi-part-1-wifi-support here]<br />
** Linksys WUSB54GC (manufactured 07/2008) No issues! needs powered hub on version 1.0 boards.<br />
<br />
* '''LogiLink'''<br />
** Wireless LAN USB 2.0 Nano Adapter 802.11n LogiLink [http://www.logilink.eu/showproduct/WL0084B.htm] is working even USB powered.<br />
<br />
* '''Lutec'''<br />
** Lutec WLA-54L (old version with ZD1211b chipset) is working even USB powered.<br />
<br />
* '''Micronet'''<br />
** Micronet SP907NS, 11N Wireless LAN USB Adapter (uses Realtek RTL8188CUS) works plugged directly into Raspberry Pi USB (B) [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt Debian installation instructions] IMPORTANT: read the instructions first to avoid problems, and [http://dl.dropbox.com/u/80256631/install-rtl8188cus-latest.sh Auto-install script]. The script has been used to install other adapters using the RTL8188CUS chip. [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Updated driver] that handles the latest rpi-updates that kill the original driver, download for manual installation, automatically installed by the Auto-install script.<br />
<br />
* '''MSI'''<br />
** 0db0:6861 MSI-6861 802.11g Wi-Fi adapter (US54G): works with external powered USB hub, requires firmware from [http://sourceforge.net/projects/zd1211/files/zd1211-firmware/ here], power management must be disabled: <code>iwconfig wlan0 power off</code><br />
<br />
* '''Mvix'''<br />
** Mvix Nubbin (MS-811N): works out of the box on Raspbian "Wheezy" and does not need a powered USB hub.<br />
<br />
* '''Netgear''' <br />
** N150: Reported as WNA1100 device, uses the Atheros ar9271 chipset. On Debian, requires the <code>firmware-atheros</code> package from the <code>Squeeze-backports</code> non-free repository (!)<br />
** N150: Some versions reported as Realtek RTL8188CUS device. Read Micronet entry above and use RTL8188CUS script for installation. Works best plugged into powered USB hub.<br />
** WG111v1: Prism54 chipset. Needs powered hub. Follow info for Prism54 chipset on Debian wiki.<br />
** WG111v2: Realtek rtl8187 chipset. Seems to draw a lot of power; e.g. I can't power this and a USB thumb drive simultaneously.<br />
** WG111v3: Realtek RTL8187B chipset. Works straight out of the box using a powered USB hub.<br />
** WNA1000M works with Raspberry Pi Model B Board v. BS1233.However when downloading torrents, when torrent pick up speed system become unresponsive. <br />
<br />
* '''OvisLink'''<br />
** Evo-W300USB: USB ID 148f:2270 Ralink Technology RT2770. apt-get install firmware-ralink<br />
<br />
* '''Patriot Memory'''<br />
** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered USB hub.<br />
** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module<br />
<br />
* '''Ralink'''<br />
** inner 02 joggler Wi-Fi USB RT2770F USB-ID 148f:2770 (firmware-ralink required) (only got dhcp on powered hub)<br />
** [http://www.dx.com/p/24688 RT2070] USB-ID 148f:2070 firmware is already loaded into Raspbian. For Debian, the firmware must be installed ([http://wiki.debian.org/rt2870sta instructions]). Needs a powered USB hub.<br />
** RT3070 USB-ID 148f:3070 firmware is already loaded into Raspbian.<br />
** [http://www.element14.com/community/docs/DOC-44703 RT2501/RT2573] USB-ID 148f:2573 (firmware-ralink required) (B)<br />
** RT5370 USB-ID 148f:5370 ([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from Wheezy]) [[RPi_Ralink_WLAN_devices]](B). An image of an adapter with this chip can be found [http://i.imgur.com/wRF7L.jpg here].<br />
<br />
* '''Rosewill'''<br />
** RNX-N180UBE Wireless B/G/N Adapter<br />
*** Realtek RTL8191SU chipset, USB-ID 0bda:8172<br />
*** Tested in Arch, works out of box. Powered USB hub required.<br />
*** Tested in Raspbian, used wicd to configure network settings. Powered USB hub Required.<br />
*** Tested in Raspbmc. Needs package firmware - Realtek and used wicd-curses to configure. Powered USB hub required<br />
** RNX-G1 Wireless B/G Adapter<br />
*** Realtek RTL8187 chipset, USB-ID 0bda:8187<br />
*** Tested in Arch, works out of box. USB hub required.<br />
** RNX-MiniN1 (RWLD-110001) Wireless-N 2.0 Dongle (Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter)<br />
*** Tested in Raspbian, powered from USB hub.<br />
<br />
* '''Sabrent'''<br />
** USB-A11N: Mini USB 2.0 Wireless-N WiFi Network Adapter: USB ID 0bda:8176, works automatically in Raspbian using rtl8192cu driver along with Logitech BT mini-receiver (keyboard/mousepad) without external hub using 5.25V 1 A psu (4.99V T1/T2) on rev 2.0 (B)<br />
<br />
* '''Sagem'''<br />
** Sagem Wireless USB stick XG-760N: USB ID 079b:0062, Module is not shipped in Debian image, but it can be "sudo apt-get install zd1211-firmware"<br />
<br />
* '''Sempre'''<br />
** Sempre Wireless USB stick WU300-2: USB ID 0bda:8172, Realtek r8712u driver + firmware-realtek package. Module is shipped in Raspbian image. If you need to build it for other distros, read this: http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/<br />
<br />
* '''Sitecom'''<br />
** Sitecom Wi-Fi USB Adapter N300: USB ID 0a5c:5800, Realtek r8712u driver + firmware Realtek. Module available in shipped Raspbian image. '''NOTE:''' although this dongle will also work without powered hub, if there is a voltage problem (either on the Raspberry or on the hub, but verified only on the hub so far) this wifi dongle will receive signal perfectly (RX), but not be capable of sending anything (TX) and the MAC address will be permanently set to FF:FF:FF:FF:FF:FF (this is indicative that there is not enough power) [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=24247]<br />
<br />
* '''SL'''<br />
** SL-1507N: USB 802.11n 150M Wi-Fi Wireless LAN Network Card Adapter SL-1507N Black<br />
*** I bought this on on eBay for $4.19 (free shipping) @ http://www.ebay.com/itm/270853614804?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_4379wt_1199<br />
*** It worked out of the box on Raspbmc RC4, with the network manager add-on; seems to be an rt2800usb<br />
*** dmesg output "usbcore: registered new interface driver rt2800usb"<br />
<br />
* '''SMC'''<br />
** SMCWUSBS-N: Hardware detected as rt2800, but it is missing firmware; "sudo apt-get install firmware-ralink" fixed it<br />
** SMCWUSB-G: Gives "couldn't load firmware" error. "sudo apt-get install zd1211-firmware" fixes it.<br />
<br />
* '''Sony'''<br />
** Sony UWA-BR100 802.11abgn Wireless Adapter [Atheros AR7010+AR9280] (Vendor ID: 0411, Product ID: 017f) - Tested with Raspbian. Needs package firmware-atheros.(B)<br />
<br />
* '''Tenda''' <br />
** USB 11n adapter on a G network: Ralink 2870/3070 driver (!)<br />
** Tenda W311MI Wireless N Pico USB Adapter (identified as Ralink RT5370 Wireless Adapter; USB-ID: 148f:5370) - Works out-of-the-box for Raspian 2012/09/18 or later. An earlier version gave me problems.<br />
** Tenda W311U Mini 11N Wireless USB Adapter (USB-ID 148f:3070): Ralink 2870/3070 driver; needs powered hub. [http://blog.modmypi.com/2012/06/installing-tenda-w311u-mini-wireless.html Debian installation instructions]<br />
** Tenda W311U+ Wireless USB Adapter - Tested with Raspbian.<br />
<br />
*'''The Pi Hut'''<br />
** USB 802.11n Wi-Fi adapter (from [http://thepihut.com/products/usb-wifi-adapter-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''TP-Link'''<br />
** TL-WN422G v2 (ath9k_htc) Works OOTB in Debian Wheezy Beta. Runs without powered Hub when plugged into running Raspberry Pi, but the Raspberry Pi won't boot while the stick is plugged in.<br />
** TL-WN721N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B) | works OOTB with Wheezy Raspbian (2012-08-16) connected directly to raspberry pi (B) and AP functionality tested with hostapd.<br />
** TL-WN722N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B)<br />
** TL-WN723N (RTL8188SU); works OOTB with Raspbian 2012-09-17, (B) stable with 1&nbsp;A PSU and without powered USB hub on r2.0.<br />
** TL-WN725N Works out of the box on Raspbian 2012-12-16 without a powered USB hub.<br />
** TL-WN821N v3 (ath9k_htc, htc_7010.fw); works out of the box on ArchLinuxARM, Wheezy and on OpenElec (>r11211), Problems with prior OpenElec; needs powered USB Hub (B). This chipset is also compatible with hostapd (wireless AP software)<br />
** TL-WN823N Works out of box on Raspian using powered USB Hub<br />
** TL-WN422G (Atheros AR9271, ath9k_htc) Works out of the box when plugged in before boot. Plugging in after boot only with powered USB hub.<br />
** TL-WN321G (Ralink RT/2501/RT2573, rt73_usb) Works out of the box when plugged in before boot. Plugging in after boot only with powered USB hub.<br />
<br />
<br />
* '''Trendnet'''<br />
** [http://www.wikidevi.com/wiki/TRENDnet_TEW-648UBM TEW-648UBM] USB ID: 20f4:648b, works OOTB with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/ Adafruit Occidentials Raspbian Wheezy variant] as it includes kernel with [http://www.wikidevi.com/wiki/Special:Ask?title=Special%3AAsk&q=%5B%5BChip1+model%3A%3ARTL8188CUS%5D%5D&po=%3FInterface%0D%0A%3FFCC+ID%0D%0A%3FVendor+ID%0D%0A%3FDevice+ID%0D%0A%3FChip1+model%0D%0A%3FSupported+802dot11+protocols%0D%0A%3FMIMO+status%0D%0A%3FOUI%0D%0A&sort_num=&order_num=ASC&eq=yes&p%5Bformat%5D=broadtable&p%5Blimit%5D=500&p%5Bsort%5D=&p%5Boffset%5D=&p%5Bheaders%5D=show&p%5Bmainlabel%5D=&p%5Blink%5D=all&p%5Bsearchlabel%5D=&p%5Bintro%5D=&p%5Boutro%5D=&p%5Bdefault%5D=&p%5Bclass%5D=sortable+wikitable+smwtable&eq=yes RTL8188CUS driver built-in] (B)<br />
** [http://www.wikidevi.com/wiki/TRENDnet_TEW-649UB TEW-649UB] Works with OpenElec 3.0, chipset Realtek RTL8191SU<br />
<br />
* '''Widemac'''<br />
** RT5370 Wireless Adapter from [http://www.ebay.co.uk/itm/180887771838?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Ebay] runs without powered hub. Follow these [http://elinux.org/RPi_Ralink_WLAN_devices instructions], but go to [http://ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/ ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/] and pick the latest firmware-ralink_0.xx_all.deb<br />
<br />
* '''ZyXEL'''<br />
** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)<br />
** [http://www.zyxel.com/products_services/g_202.shtml G-202] model 0586:3410 ZyXEL Communications Corp. ZyAIR G-202 802.11bg using zd1211rw kernel module and zd1211-firmware package<br />
<br />
===Problem USB Wi-Fi Adapters===<br />
<br />
These adapters were tested and found to have issues the Raspberry Pi. Note [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=6928] as a possible solution/explanation for errors while running LXDE.<br />
<br />
* '''Alfa'''<br />
** AWUS036NHA (Vendor ID: 0cf3, Product ID: 9271) - Tested with Raspbian. Works fine if connected after boot. Kills boot process if previously attached. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=16809&p=169469#p169469 Details here.]<br />
<br />
* '''EDIMAX'''<br />
** EW-7811Un (Vendor ID: 7397, Product ID: 7811) - Reports as containing the Realtek RTL8188CUS chipset listed below, no lockup or kernal oops under Wheezy, but dmesg reports constant timeouts trying to initialize the module. This appears to be resolved on 2012-09-18-Wheezy-raspbian and newer versions.<br />
<br />
* '''Linksys'''<br />
** WUSB300N (Vendor ID: 13B1, Product ID: 0029) - Tested with Raspbian, OpenELEC, among others. No Linux chipset support for Marvell 88W8362 at all.<br />
<br />
* '''LogiLink'''<br />
** WL0085 tested under Debian (Squeeze, Wheezy, Raspbian); no stable connection can be established. This gets even worse when X is running.<br />
<br />
* '''MicroNEXT'''<br />
** MN-WD152B (Debian image) modprobe hangs when plugged in, lsusb hangs. udevd errors in the logs. [http://www.element14.com/community/thread/17632] [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=6737]<br />
*** Possible fix: try the new [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1] image (based on Raspbian Wheezy) as it includes the needed 8192cu driver builtin to the kernel<br />
<br />
* '''Netgear'''<br />
** WNDA3100v2 tested with Debian (Wheezy); no driver for broadcom chipset (see [http://www.wikidevi.com/wiki/Netgear_WNDA3100v2 http://www.wikidevi.com/wiki/Netgear_WNDA3100v2]).<br />
<br />
* '''Realtek'''<br />
** RTL8188CUS USB-ID 0bda:8176, kernel oops in dmesg and freeze when pulled from USB. (B)<br />
<br />
* '''Trendnet'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TEW-424UB] USB ID: 0bda:8189; tested on Debian, Fedora & Arch; rtl8187 driver; errors with LXDE running (B)<br />
<br />
* '''TP-Link'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TL-WN821N] USB ID: 0cf3:7015; tested on Debian; requires [http://linuxwireless.org/download/htc_fw/1.3/htc_7010.fw htc_7010.fw] firmware; ath9k_htc driver; errors with LXDE running (B)<br />
** TL-WN723N USB ID: 0bda:8176; tested on Arch without a powered hub; it seems to draw too much current.<br />
** TL-WDN3200 USB ID: 148f:5572, no native driver available under Raspbian, OpenELEC, raspbmc (neither under x86 Linux) for the ralink 5572 chipset. Might work if driver is compiled from [http://www.ralinktech.com/en/04_support/support.php?sn=501 source].<br />
<br />
== USB Bluetooth adapters ==<br />
===Working Bluetooth adapters===<br />
* Asus USBIA-EG (paired with Asus Blutooth Keyboard/Media Center Remote<br />
** Verified works error-free in Multiple Distros (Openelec, Raspbian, RaspBMC, Xbian) Latest builds eliminate text echo problems.<br />
* Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) - (USB ID 0a12:0001)<br />
** Example of above is; TOPDIGI UA01 Bluetooth USB Dongle Plug and Play (install bluez package from std repos)<br />
** Tesco own brand 'Technika' Nano Bluetooth Adapter has the Cambridge Silicon Radio chipset and works fine, cost £5.97 at time of posting.<br />
** Hama USB Bluetooth 3.0 adapter (Class 1) ~£10 on amazon.co.uk.<br />
** Another sample: Product ID: 0a12:0001, pictured here: http://www.element14.com/community/message/58288<br />
** RiiTek RT-MWK02+ - comes with a USB Bluetooth adapter that works perfectly for both the RiiTek mini Bluetooth keyboard/mouse and other Bluetooth devices. Tested both on builtin USB and on powered USB hub. There are other RiiTek Bluetooth (and non-Bluetooth wireless) devices on the working list. Bluetooth adapter shows up in lsusb as "0a12:0001 Cambridge Silicon Radio" - this is notable as most other sources of this chipset do not seem to be available in the US.<br />
* D-Link DBT-122, with ID 07d1:f101, using a Broadcom chip<br />
** http://www.element14.com/community/message/58288<br />
* IOGear GBU321 (Broadcom BCM2045 Chipset)<br />
** Works with Raspbian Wheezy directly attached to Raspberry Pi and via powered USB hub.<br />
* Trust BT-2400p<br />
** Working well with Raspbian Wheezy directly attached to Raspberry Pi. Using with sma-Bluetooth (SMA Solar Inverter reading software).<br />
===Working Bluetooth/Wifi Combo adapters===<br />
* PLANEX 2 in 1 Micro Size USB Bluetooth3.0 WiFi Combo Adapter - Model number: BT-Micro3H2X<ref>http://www.raspberrypi.org/phpBB3/viewtopic.php?f=45&t=27678</ref><br />
* Cirago Bluetooth 3.0 High Speed & Wi-Fi Combo USB Mini Adapter, Class 2 (BTA7300)<ref>http://www.raspberrypi.org/phpBB3/viewtopic.php?f=45&t=27678</ref><br />
<br />
===Problem Bluetooth adapters===<br />
* '''Belkin'''<br />
** Belkin F8T017. Tested with Raspbian 2012-07-15 and bluez installed with apt-get. When dongle is inserted into Pluscom powered USB hub, my remote PuTTY session scrolls incredibly slowly (testing with ls -R to generate text). Suspect network issue. Lots of errors on dmesg too. Raspberry Pi itself is responsive when using directly. On removal of the device everything goes back to normal.<br />
* '''Generic'''<br />
** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.<br />
* Asus USB-BT211<br />
** Shows up as HCI device in Raspbian, but it does not scan or pair.<br />
** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962<br />
<br />
== USB Ethernet adapters ==<br />
===Working Ethernet adapters===<br />
* '''AVM'''<br />
** FRITZ!Box WLAN 3030 USB Ethernet Adapter: Works out of the box. No external power source needed.<br />
* '''Wintech'''<br />
** USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver. Probably needs more than 100&nbsp;mA current. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=46&t=8708#p106136]<br />
* '''LogiLink'''<br />
** USB 2.0 UA0144: AX88772 chipset using the asix kernel driver. Tested only on powered USB hub so far.<br />
** LogiLink Fast EN USB 2.0 to RJ45 Adapter: Test on Wheezy-Raspian (2012-08-16) without USB Hub will be confirmed<br />
lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter <br />
* '''Apple'''<br />
** Apple USB Ethernet Adapter using asix kernel driver. Works out of the box on Raspbian, haven't tested on any other OS.<br />
* '''Edimax'''<br />
** Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Works out of the box. Needs its own power source.<br />
* '''D-Link'''<br />
** D-Link DUB-E100 Fast Ethernet USB 2.0 Adapter - works out of the box, requires own power supply (from powered USB hub)<br />
* '''Sabrent'''<br />
** Sabrent USB 2.0 10/100 Ethernet Adapter - works out of the box (asix), but USB 2.0 '''only''' (does not work if using dwc_otg.speed=1 in cmdline.txt to force USB 1.1 for other problem hardware)<br />
* '''Sitecom'''<br />
** Sitecom LN-030 V2 detected as ASIX AX88772 USB 2.0 Ethernet Adapter works out of the box. Doesn't seem to require any extra power supply.<br />
* '''A-Link'''<br />
** A-Link NA1GU Gigabit USB 2.0 Ethernet adapter<br />
This adapter works, but it (probably) requires a bit of work. The driver for the chipset (Asix AX88178) included with the Raspbian kernel (v 3.1.9+ Aug 7 2012) does '''not''' work. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. :-( In order to make it work you need to download the latest driver from [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=84;71;100&PLine=71 the chipset manufacturer]. The version I used was "Linux kernel 3.x/2.6.x Driver" v4.4.0, released 2012-05-18. Fortunately this is GNU GPLv2 -licenced source code and not a binary blob, so compiling it for the Raspberry Pi is perfectly doable. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. >:-( Fortunately there is [https://www.grendelman.net/wp/compiling-kernel-modules-for-raspbian-raspberry-pi a very useful guide] for how to get the sources from github, and preparing that source so that you can compile modules. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make && sudo make install". Reboot and you should have a fully working Ethernet adapter.<br />
<br />
The adapter seems to work without a powered USB hub, but according to the specifications it can draw up to 190&nbsp;mA, so there might be stability issues if additional power is not provided.<br />
* '''Hama'''<br />
** Hama 00049244 Fast Ethernet USB 2.0-Adapter detected as MOSCHIP 7830/7832/7730 usb-NET adapter. Works out of the box on Debian Wheezy/sid (2012-08-08-wheezy-armel)(not tested yet on other OS). No external power source or USB hub needed.<br />
<br />
===Problem Ethernet adapters===<br />
* Axago<br />
** Axago ADE-X1 10/100 Ethernet Adapter (USB: 9710:7830 driver:mcs7830). Adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. Needed to unplug and plug USB again. Tested with and without powered USB hub. dmesg error: NETDEV WATCHDOG: eth1 (MOSCHIP usb-ethernet driver): transmit queue 0 timed out<br />
<br />
== USB Sound Cards ==<br />
You will usually want the <code>alsa</code> package for sound. In the Debian image for Raspberry Pi (and possibly other distributions) USB sound cards are prevented from loading as the first sound card, which can be an annoyance if it's the only device you have. To disable this behaviour edit <code>/etc/modprobe.d/alsa-base.conf</code> and comment out the last line; <code>options snd-usb-audio index=-2</code> . If you are not user ''pi'' you may need to add your username to the ''audio'' group thus: <code>sudo adduser yourusername audio</code> (user ''pi'' usually belongs to this group anyway).<br />
<br />
* '''Creative'''<br />
** [http://asia.creative.com/products/product.asp?category=1&subcategory=207&product=17892 Sound Blaster Play!]<br />
* '''Daffodil'''<br />
** [http://www.amazon.co.uk/gp/product/B002FI7GWK/ref=oh_details_o03_s00_i00 USB Sound Adapter US01]. Tested with low-cost headphone/microphone set via ''audacity'' (See notes at [http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdapter.html CPM-Spectre-Pi...DaffodilUSBSoundAdapter]).<br />
* '''Edirol'''<br />
** [http://www.roland.com/products/en/UA-1A/ UA-1A]<br />
* '''Hercules'''<br />
** [http://www.hercules.com/fr/Cartes-Son/bdd/p/123/gamesurround-muse-xl-pocket-lt3/ Gamesurround Muse XL (Pocket LT3)]<br />
* '''Logilink'''<br />
** [http://www.logilink.de/showproduct/UA0053.htm?seticlanguage=en UA0053 USB Soundcard with Virtual 3D Soundeffects LogiLink]<br />
* '''Logitech'''<br />
** [http://www.amazon.com/Logitech-Wireless-Gaming-Headset-Surround/dp/B003VANOFY/ref=sr_1_1?ie=UTF8&qid=1358114107&sr=8-1&keywords=g930 Logitech G930 Wireless Gaming Headset with 7.1 Surround Sound] (stereo works with ALSA, have not tried 7.1 Surround Sound)<br />
* '''NuForce uDAC-2'''<br />
** [http://www.nuforce.com/hp/products/iconudac2/index.php NuForce uDAC-2 Headphone Amplifier and USB DAC]<br />
* '''Plantronics'''<br />
** [http://www.ebay.com/itm/Genuine-New-Plantronics-External-USB-Audio-Soundcard-New-Sealed-/300845395889?pt=US_Sound_Card_External&hash=item460bc86fb1 Plantronics Stereo USB Adapter -01] (works with ALSA) (shows up in lsusb as 0d8c:000c C-Media Electronics, Inc. Audio Adapter)<br />
* '''Terratec'''<br />
** [http://www.terratec.net/fr/produkte/Aureon_Dual_USB_12339.html Aureon Dual USB] (not with USB high speed; add dwc_otg.speed=1 to /boot/cmdline.txt, but that will slow down all USB transfers)<br />
* '''Texas Instruments PCM2704'''<br />
** [http://www.ti.com/product/pcm2704 PCM2704 98&nbsp;dB SNR Stereo USB2.0 FS DAC with line-out and S/PDIF output, Bus/Self-powered]<br />
<br />
==USB 3G Dongles==<br />
* Huawei E173<br />
* Huawei E220<br />
* Huawei E160 (AT commands only)<br />
* Franklin U600 from Sprint / VirginMobile<br />
** Use usb_modeswitch and vendor 0x1fac and product 0x0150/0x0151<br />
* Digicom Internet Key 7.2 HSUPA '''MU372-L01''' [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MU372L01]<br />
Tested on Raspbian and Archlinux. Detected as 230d:0001. Works with cdc_acm driver. Install usb_modeswitch.<br />
There are 2 "com ports"( /dev/ttyACM0 and /dev/ttyACM1 ) . Tested with Network Manager.Works also perfectly with SAKYS3G [http://www.sakis3g.org/] tools (!! led is always off !!) and wvdial. A working wvdial.conf: http://ubuntuforums.org/showpost.php?p=10361881&postcount=28 . (for example for Vodafone IT , replace Init3 with this: Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" and replace line Modem = /dev/ttyUSB0 with Modem = /dev/ttyACM1 ) and run with wvdial voda .<br />
<br />
== USB IR Receivers==<br />
SMK Manufacturing, Inc. eHome Infrared Receiver (Works out of the box with OpenELEC)<br />
<br />
== USB Radio devices==<br />
*FM Radio<br />
** ADS InstantFM Music - FM radio tuner works fine under Debian.<br />
<br />
== USB TV Tuners and DVB devices==<br />
*August<br />
**DVB-T205, based on rtl2832u chipset, working with [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0 this driver]. Tested with Saorview (Irish DTT service), both HD & SD.<br />
*DVBSky<br />
**[http://dvbsky.eu/Products_S860.html Mystique SaTiX-S2 Sky USB]: Scanning/watching SD and HD works via vdr and streamdev plugin, watching on the Raspberry Pi directly is laggy as hell. DVB-USB and I2C support must be enabled in the kernel. Needs drivers/firmware from [http://dvbsky.eu/Support.html here].<br />
*Sundtek<br />
**Sundtek MediaTV Digital Home<br />
**Sundtek MediaTV Pro<br />
**Sundtek SkyTV Ultimate<br />
**[http://shop.sundtek.de DVB-C, DVB-T, DVB-S/S2]: digital TV works, streaming to Windows / Linux is no problem. Easy installation [http://support.sundtek.com/index.php/topic,4.0.html English]<br />
*Hauppauge<br />
** Hauppauge NOVA-T Stick (Revision 70xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge NOVA-TD Stick (Revision 52xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge WinTV-HVR-1950 (tested analog tuner with omxplayer)<br />
** Hauppauge WinTV-HVR-950Q (tested Digital OTA with TVHeadend in Raspbian)<br />
*K-World<br />
** K-World UB499-2T Dual DVB-T USB Tuner. IT9137 chipset. With no other USB devices connected Raspberry Pi can just about power this stick. IR and supplied remote work with XBMC.<br />
*Technisat<br />
**Technisat_SkyStar_USB_HD. Instructions: http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_HD Used the Raspberry Pi to receive and redirect it via network to another host. Didn't try to play back the stream on the Raspberry Pi itself. Tested with Astra 19.2E radio and SD-TV channels<br />
*Generic<br />
** [http://www.onsources.com/product_images/a/757/watch_and_record_digital_tv_dongle__44323_zoom.jpg DVB-T USB Dongle (Silver casing)], based on AF9015 chipset.<br />
** [http://www.electrodepot.fr/media/catalog/product/cache/1/image/500x/9df78eab33525d08d6e5fb8d27136e95/P926993.jpg DVB-T USB Dongle], based on RTL2832 FC12 (HD/SD), IR was detected, but it is not tested.<br />
** [http://obrazki.elektroda.pl/8081115000_1317678968.jpg HDTV USB DVB-T] dongle, based on IT9135. This tuner comes in two revisions. Revision is printed on PCB.<br />
*** rev. 1.0; should work with 3.2+ kernel, need confirmation.<br />
*** rev. 2.0; works with kernel 3.6.11, without a powered hub. This tuner also requires a firmware (dvb-usb-it9135-02.fw) which can be downloaded from [http://logout.hu/bejegyzes/azbest/usb_dvb-t_tuner_it9135_rev2/hsz_1-50.html this page]. It's in Hungarian, so google translate or equivalent is recommended. The remote also works.<br>According to [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=35&t=29141 this post], there may be issues on some software configurations when using ''omxplayer''.<br />
<br />
== USB Webcams ==<br />
<br />
This list is not entirely reliable, working does not necessarily mean working without errors. Please contribute with your own experiences!<br />
<br />
<div style="margin: -.3em -1em -1em -1em;"><br />
{| width="100%" bgcolor="#fff" border="0" cellpadding="2px" cellspacing="2px" style="margin:auto;"<br />
|- align="center" bgcolor="#e7eef6"<br />
| '''Brand'''<br />
| '''Name'''<br />
| '''Model Number'''<br />
| '''Hardware ID'''<br />
| '''Verified OS'''<br />
| '''Verified OS version'''<br />
| '''Verified Resolution'''<br />
| '''Additional Information'''<br />
<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Canyon<br />
|<br />
|CNR-WCAM820<br />
|<br />
| raspbian/wheezy<br />
|<br />
| 1280x1024<br />
| 2 Mpixel camera with manual focus; works with fswebcam and v4l4j on Raspbian Wheezy armhf; problems with 1600x1200 resolution in some apps (timeouts - probably too slow USB); 1280x1024 and lower resolutions works OK<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Creative<br />
|Live! <br />
| VF0470<br />
|<br />
| ArchLinux<br />
| <br />
|<br />
| works out of the box on ArchLinux<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Creative<br />
|Live! Cam Socialize HD<br />
| VF0610<br />
|041e:4080<br />
| raspbian/wheezy <br />
| 2012-11-26<br />
| 960x544<br />
| Works at 1280x720 taking stills in fswebcam with some errors using MJPEG, unusable with YUYV. 960x544 works in both MJPEG and YUYV. Has some stabilitiy issues if powered from RasPi (Drops USB +eth0 every 8 or so hours). Helps to append nodrop=1 and timeout=5000 to uvcvideo module.<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Creative<br />
|Live! Cam Vista IM<br />
| VF0640<br />
|<br />
| raspbian/wheezy<br />
|<br />
| <br />
| works on Raspbian at 320x240 resolution, 15fps<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Creative<br />
|Webcam Notebook<br />
| PD1170<br />
|<br />
| <br />
|<br />
| <br />
| Detects, untested.<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Creative<br />
|Webcam Pro<br />
| PD1030<br />
|<br />
| <br />
| <br />
|<br />
| ov519 driver crashes almost immediately. ("gspca: ISOC data error: [0] len=0, status=-4004")<br />
<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|HP<br />
|WebcamHD-2200<br />
| HD-2200<br />
|<br />
| <br />
| <br />
| <br />
|<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|HP<br />
|Webcam HP-3100<br />
|HP-3100<br />
|<br />
| <br />
|<br />
| <br />
| UVCVideo /dev/video0 Needs chmod to 666 to operate. Will work without hub if only device in USB ports. Works with both Arch and Wheezy out of the box<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C100<br />
| V-U0013<br />
|<br />
| raspbian/wheezy <br />
| 2012-08-16<br />
| <br />
| works fine without powered hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C200<br />
| <br />
| 046d:0802<br />
| <br />
|<br />
| <br />
| <br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C270<br />
| <br />
|<br />
|<br />
| <br />
| <br />
| With external power<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C310<br />
| <br />
|<br />
|<br />
| <br />
| <br />
| Does not require a powered hub to capture snapshots<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C510<br />
| <br />
|<br />
| <br />
|<br />
| <br />
| <br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C525<br />
| <br />
|<br />
|<br />
| <br />
| <br />
| Works fine without powered hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C615<br />
| <br />
|<br />
| <br />
|<br />
| <br />
| Works fine without powered hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C905<br />
| <br />
|046d:080a<br />
|occidentalis<br />
|v0.2<br />
|1600x1200<br />
| Works fine without powered hub, she is uncvideo and detected out of box as Video0 V4L device. 1600x1200 is slow rate but he tested with motion.<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C910<br />
| <br />
|<br />
| <br />
|<br />
| <br />
| With external power, is uncvideo<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|Webcam C920<br />
| <br />
|<br />
| raspbian/wheezy<br />
|<br />
| <br />
| With powered hub, detected out of box as Video0 V4L device<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|QuickCam Orbit/Sphere<br />
| <br />
|<br />
| <br />
|<br />
| <br />
| Works with external power<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Logitech<br />
|QuickCam Pro 9000<br />
| <br />
|<br />
| raspbian/wheezy<br />
|<br />
| <br />
| Powered by RasPi<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Logitech<br />
|Webcam Pro 4000<br />
| <br />
|<br />
| <br />
| <br />
| <br />
| It uses pwc driver which does not work. Maybe it's because of general Raspberry Pi USB bug.<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Logitech<br />
|Webcam Pro 9000<br />
| <br />
| 046d:0809<br />
| Arch Linux<br />
|<br />
| <br />
| Powered by RasPi, measured ~120 mA current capturing at ~5fps. Has issues capturing images at higher than default resolutions (using motion - Arch and Debian).<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Medion<br />
|<br />
| MD86511<br />
|<br />
| raspbian/wheezy <br />
| 2012-07-15<br />
| <br />
| Powered by RasPi<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Microsoft<br />
|LifeCam Cinemap 720p USB HD Webcam<br />
| H5D-00001<br />
|<br />
| raspbian/wheezy <br />
|<br />
| <br />
| <br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Microsoft<br />
|LifeCam HD-5000<br />
| <br />
|<br />
| <br />
|<br />
| <br />
| Picture breaks up at the bottom<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Microsoft<br />
|LifeCam HD-6000<br />
| <br />
|<br />
| raspbian/wheezy <br />
|<br />
| <br />
| Powered by USB hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Microsoft<br />
|LifeCam<br />
| NX-6000<br />
|<br />
| raspbian/wheezy <br />
|<br />
| <br />
| Powered by USB hub<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Microsoft<br />
|LifeCam<br />
| VX-7000<br />
|<br />
| raspbian/wheezy <br />
|<br />
| <br />
| Powered by USB hub<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Microsoft<br />
|LifeCam<br />
| VX-3000<br />
|<br />
| raspbian/wheezy <br />
|<br />
| <br />
| There do appear to be some issues with image quality and getting partial frames and such, with fswebcam<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Microsoft<br />
|LifeCam<br />
| NX-6000<br />
|<br />
| raspbian/wheezy <br />
|<br />
| <br />
| Powered by USB hub<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Microsoft<br />
|LifeCam<br />
| VX-800<br />
|<br />
| raspbian/wheezy <br />
|<br />
| 352x288<br />
| Doesn't work at full resolution<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Microsoft<br />
|LifeCam Studio/Cinema<br />
| <br />
|<br />
| <br />
|<br />
| <br />
| Has UVC issues detailed here [http://www.ideasonboard.org/uvc/#devices]. Horizontal lines problem [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12304]. Stability issues [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12247].<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Microsoft<br />
|Xbox Live Vision<br />
| <br />
| 045e:0294<br />
| Arch Linux <br />
|<br />
| <br />
| Powered by RasPi<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Silicon Motion<br />
| SM731 Camera<br />
| <br />
| 090c:71b3<br />
| Raspbian Wheezy<br />
|<br />
| <br />
| Required UVCVideo driver - worked out of the box. Tested for 320x240 using motion & camorama for pictures,streaming.<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Sony<br />
| Playstation Eye for PS3<br />
| <br />
|<br />
| <br />
|<br />
| <br />
| The occasional frame is corrupted/stutters when running at 640x480<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Sony<br />
| Playstation Eye for PS2<br />
| <br />
|<br />
|<br />
| <br />
| <br />
| Occasional 'mangled frame' directly connected to Rev 2 Raspberry P<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Sony<br />
| Playstation Eye for PS2<br />
| SLEH 00030<br />
|<br />
| Arch Linux<br />
|<br />
| <br />
| (OV519 camera). Picture constantly breaks up on xawtv and wxcam under Arch Linux. Noted there were ISOC data error len=0 status=-4004 errors in dmesg. This happens when powered from the Raspberry Pi and when powered from a Pluscom USB hub. Arch was updated on 17th July 2012<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|T'nB<br />
| Minipix 100K pixels<br />
| IMWB032992<br />
| 1e4e:0100<br />
| raspbian/wheezy<br />
| 2012-12-16<br />
| <br />
| RasPi freezes (reboot needed) after a few minutes of using Motion to stream (tested with external power)<br />
<br />
<br />
|- valign="top" align="left" style="background: #F5FAFF;"<br />
|Trust<br />
| 2 MP Auto Focus Webcam<br />
| <br />
|<br />
| Arch Linux<br />
|<br />
| <br />
| works out of the box<br />
<br />
|- valign="top" align="left" style="background: #F6D2CF;"<br />
|Trust<br />
| SPACEC@M 200<br />
| <br />
|<br />
| Arch Linux<br />
|<br />
| <br />
| (OV511 camera). Picture stops after a few seconds in xawtv under Arch Linux and xawtv reports libv4l2 errors. This happens when powered from the Raspberry Pi and when powered from a Pluscom USB Hub. Arch was updated on 17th July 2012<br />
<br />
<br />
|-<br />
|}<br />
<br />
== USB GPS devices ==<br />
<br />
*Columbus<br />
** Columbus V-800 (MediaTek (MTKII) 3329 GPS chipset) - does not require powered USB hub. Works on Wheezy (using gpsd & gpsd-clients)<br />
*Royaltek<br />
**Royaltek RGM 2000 SiRF2 using the included serial (TTL) to USB - converter. That uses a Profilic pl2303-chip so you'll need to compile the module or the kernel manually<br />
*Garmin<br />
**Garmin eTrex Vista HCx: It works, but it may draw too much power. To get it working (software part): https://wiki.openstreetmap.org/wiki/USB_Garmin_on_GNU/Linux<br />
*GlobalSat<br />
**GlobalSat BU-353 Does not require a powered hub, works fine when directly plugged into the Raspberry Pi. On Raspian, requires the gpsd and gpsd-client packages. For some reason, the gpsd daemon does not always start correctly on boot. You may need to do something like the following to manually restart it:<br /><pre>sudo killall gpsd; sudo gpsd /dev/ttyUSB0 -F /var/run/gpsd.sock</pre><br />
<br />
*Wintec<br />
**WBT-200: No problem on Debian<br />
*Holux<br />
**Holux M-215: Works fine on Arch, uses Silicon Labs CP210x RS232 serial adaptor driver<br />
*Bluenext<br />
**Bluenext BN903S: No problem on Debian image (19-04-2012).<br />
<br />
== USB UART and USB to Serial (RS-232) adapters ==<br />
A USB UART adapter is used to access the serial console of the Raspberry Pi from a development host such as a laptop or desktop PC. The USB end connects to the PC and the UART header end connects to the USB. While it is possible to connect the USB end to another Raspberry Pi, this configuration has not been tested unless explicitly mentioned against an individual entry below.<br />
<br />
===Working USB to Serial Adapters===<br />
*'''FTDI'''<br />
**FT232 chip based adapters works for some people, but others find it hangs Linux when the port is opened. The module is ftdi_sio.<br />
<br />
** FT2232D dual RS232/FIFO works (used in various JTAG devices)<br />
<br />
*'''Prolific'''<br />
**PL2303 chip based adaptors works fine on latest Debian tested with ''minicom'' and ''gtkterm''<br />
<br />
A USB to Serial (RS-232) adapter is used the other way around, ie. the USB end connects to the Raspberry Pi and the RS-232 end (DSUB-9 or DSUB-25 pin) to the other device which may be another computer, (old) modem or printer, or some electronic test equipment.<br />
<br />
*"Best Connectivity" (Possibly also sold under the "Newlink HQ" or "Kenable HQ" labels)<br />
**FG-U1232-PL2 Based upon the Prolific PL2303X chipset and listed by ''lsusb'' as <code>ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port</code>. Appears as <code>/dev/ttyUSB0</code>, and requires the user to be a member of the ''dialout'' group (which ''pi'' is for ''Raspbian Wheezy''). Initially tested using an old RS Datalinker setup in "loopback" mode via ''microcom'' upto 9600 baud, and ''gtkterm'' after installing that from source code. All handshake lines toggled as expected and no characters were lost. Subsequently ''gtkterm'' was used to check bi-directional communication with an ancient brother EP44 electronic typewriter (as a printer/dumb terminal) at 1200 baud. Signal lines were again monitored with the Datalinker.<br />
<br />
===Problem USB to Serial Adapters===<br />
'''HL-340'''<br />
*CH340 Chipset - '''Currently not supported by RPi''' but there is a patch of kernel code [http://tiagovaz.wordpress.com/2008/01/04/using-a-hl-340-usb-serial-adapter-against-2623-linux-kernel/ here], but it is for a 2.X kernel. If you find you have bought one of these, then it may work under Windows, but as of writing there is no support for RPi. Otherwise you can have a go at getting the patch to work.<br />
<br />
== Other, exotic USB devices ==<br />
=== USB to Parallel Port/Printer Adapters ===<br />
*'''Prolific'''<br />
**PL2305 Chipset with Centronics 36w connector. Originally purchased for use with a netbook and connected to an old Canon BJC-250 printer. Worked fine under [[RPi_Distributions#RISC_OS| RISC OS Raspberry Pi]] with its in-built BJC-250 driver. Could not install the CUPS drivers etc. for Wheezy-Raspbian initially, but was able to do so for Wheezy-armel. Once I'd updated/upgraded Wheezy all was fine.(See notes at [http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/USBtoParPrntAdapter.html CPM-Spectre-Pi...USBtoParPrntAdapter] for more info. and also a [http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/WheezyCUPS.html CUPS/Wheezy installation guide])<br />
<br />
=== USB to SATA ===<br />
*'''Nippon Labs'''<br />
** 2.5" SATA HDD USB Adapter with silicone HDD sleeve. Model: USB-ADT-25SATA. Works on powered Hub, not directly to Raspberry Pi. Built-in "Y" power adapter. Does work direct on some ver2.0 boards if used with 5.25 power supply, or Y adapter<br />
<br />
=== CAN Bus ===<br />
*PEAK-System (www.peak-system.com)<br />
**PCAN-USB using the driver (kernel module) from http://www.peak-system.com/fileadmin/media/linux/index.htm<br />
=== Home automation ===<br />
*Tellstick (www.telldus.com), installation [[R-Pi_Tellstick_core|instructions]]<br />
**Depends on libftdi1<br />
<br />
=== Touch Screen ===<br />
*ACER T230H touch screen [http://support.acer.com/acerpanam/monitor/2009/acer/t230h/t230hnv.shtml]<br />
**USB TS identifies as "Quanta Computer, Inc. Optical dual-touch panel", module hid_quanta<br />
**Seems to draw over 200&nbsp;mA from USB!<br />
=== Floppy Disk Drive ===<br />
*Samsung USB Floppy Drive SFD-321U/HP<br />
**I suppose a floppy drive might be considered exotic nowadays!<br />
**LSUSB lists it as Samsung Electro-Mechanics Co. Floppy Disk Drive<br />
**Only tried connected to a powered USB hub, as the drive is labelled 5&nbsp;V at 0.5&nbsp;A on a Raspberry Pi running Debian Wheezy.<br />
**tail -f /var/log/syslog looking for mount device when plugged in, came up as SDA in testing.<br />
**sudo mkdir /media/floppy<br />
**sudo mount /dev/sda /media/floppy<br />
**Contents of floppy now available in /media/floppy<br />
**To remove drive, ensure no sessions have the floppy directory as the current working directory.<br />
**sudo umount /media/floppy<br />
=== USB Missile Launcher ===<br />
*USB Missile Launcher / Rocket Launcher sold in UK by Marks and Spencer, but it is also sold under a range of other names.<br />
**USB ID 1130:0202 Tenx Technology, Inc. Use apt-get install pymissile (python code) and there is C code at [http://sourceforge.net/projects/usbmissile/ usbmissile from Source Forge]<br />
=== USB Docking Stations ===<br />
*StarTech USB 3.0 to Dual 2.5"/3.5" SATA HDD Dock (SATDOCK2U3GB)<br />
**This is an externally powered dual sata HDD docking station, which has USB2.0 compatibility with the Raspberry Pi. <br />
**Tested with latest Raspbmc and Debian Wheezy Raspbian, 3.1.9+ #168<br />
=== USB RFID Reader ===<br />
*Unbranded 125&nbsp;kHz EM4100 RFID reader from eBay sellers (< £7), the one with a Windows logo on (easily scratches off for Linux users).<br />
**Initially would not work when plugged in directly to Raspberry Pi. Worked when connected via an unpowered Trust hub. Worked after Raspberry Pi was modified with 10K resistors over the USB polyfuses (warranty invalidated). Probably would work fine with powered hub.<br />
**Sends a 10 digit string to current window or console as if it was a keyboard. Can be captured independently of keyboard using Linux event interface (/dev/input), but the kernel in current distributions does not have CONFIG_INPUT_EVDEV selected so kernel rebuild is necessary.<br />
=== JTAG ===<br />
* FTDI2232D dual RS232/FIFO based JTAG (e.g. SheevaPlug JTAGKey USB-ID 9e88:9e8f)<br />
** works using the Raspberry Pi as a development host<br />
=== USB 3.0 Multi-Card Reader ===<br />
* US Robotics All-In-One Multi-Format Card Reader (Product # USR8420) Accepts 5 cards simultaneously<br />
** SD/MMC + MS/MS PRO or DUO/DUO PRO + CF/MD + SM + SD/MMC or MS/MS PRO. Useful for backing up cards containing other OS Distros<br />
<br />
== PS2 / AT to USB Converters ==<br />
<br />
* Unbranded active converter known as the "blue cube". Based on the Cypress CY7C63723C 8 bit RISC. Please see http://geekhack.org/showwiki.php?title=PS2-to-USB+adapters for more information.<br />
Note that although the adapter might work, PS/2 keyboards were not designed to be low power USB devices, so they might not meet the requirement to work with considerable lowered supply voltage (4.4 volt) provided by the USB ports of the raspberry PI. These keyboards should work when powered by a powered hub. <br />
<br />
'''Tested PS2/AT keybords'''<br />
<br />
All above tested with the famous "blue cube" on a powered USB hub.<br />
<br />
*IBM Model F (please note requires an additional AT to PS2 converter)<br />
*Dell AT101w<br />
*Northgate Ominikey Ultra T (please note requires an aditonal AT to PS2 converter)<br />
<br />
* 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller<br />
** Working: Ipex RT215KTW PS/2 keyboard<br />
** Not working: HP SK-2502 PS/2 keyboard (gets power, but it does not init - three LEDs remain permanently lit. Keyboard + Holtek converter work on a Linux PC, although this keyboard doesn't work with some native PS/2 ports.)<br />
<br />
== Power adapters ==<br />
The Raspberry Pi uses a standard Micro USB (type B) power connector, which runs at 5&nbsp;V. Generally you can use a MicroUSB to USB cable and then either power the Raspberry Pi directly from your main computers USB ports (if they provide enough power), or by using a USB to Mains adaptor. A number of mobile phones use MicroUSB power cables, and these are compatible with the Raspberry Pi in most cases. Below is a list of power adaptors known to work.<br />
<br />
===Working power Adapters===<br />
* '''Adafruit'''<br />
** 5.25 V 1 A Model 501 (Newark 44W4932) USB 110-240 VAC power supply [4.99-5.01 V @ T1/T2 with 100 mA BT and/or mini wireless-n on RPi USB ports]<br />
* '''AlcaPower'''<br />
** 5&nbsp;V 2.5&nbsp;A Model AP5A - Charger/switching with 7 connectors(also Microusb)<br />
* '''Ansmann'''<br />
*** Dual USB charger slim, Model-Nr. 1201-0001<br />
* '''Apple'''<br />
Note that apple designs its charger products to work optimally as '''chargers''', in practice this means that apple chargers drop their output voltages somewhat with output current, so that the charging circuits do not need to dissipate more heat than is strictly necessary. Because of this, and although many people have reported apple products to power their basic PI setup reliably, its still not an optimal choice for a PI system that uses power hungry USB devices. Also, because of the popularity and high price of these chargers there are many very sub standard, but almost impossible to recognize as fake copies on the market, and some of these fakes are about the worst things you can try to power your PI with! Not only do they not work, they may actually be dangerous to use!<br />
** 5&nbsp;V 2.1&nbsp;A USB charger for iPad2, model A1357<br />
** 5&nbsp;V 1.0&nbsp;A USB Charger for iPod<br />
** 5&nbsp;V 1.0&nbsp;A USB Charger for iPhone 4<br />
* '''Amazon'''<br />
** 5&nbsp;V 0.85&nbsp;A USB charger for Kindle<br />
** 5&nbsp;V 2&nbsp;A Mains to USB A adaptor, Branded "CostMad" <br />
* '''Asus'''<br />
** 5&nbsp;V 2.0&nbsp;A USB charger for Google Nexus 7<br />
* '''Belkin'''<br />
** 5&nbsp;V 2.6&nbsp;A 4 port Ultra-Slim Desktop hub (Model F4U040) (Raspberry Pi running from USB hub port)<br />
** 5&nbsp;V 2.5&nbsp;A 4 port USB Hub (Model F5U404) (Raspberry Pi running from USB hub port)<br />
** 5&nbsp;V 3.5&nbsp;A 7 port USB 2.0 Mobile Powered Hub (Model F4U018) (Raspberry Pi running from USB hub port)<br />
** 5&nbsp;V 3.5&nbsp;A 7 port USB Hub (Model F5U706) (Raspberry Pi running from USB hub port)<br />
** Mini Surge Protector Dual USB Charger (Model BZ103050-TVL)<br />
** Universal USB Wall Charger (5&nbsp;V 1&nbsp;A) (Model F8Z222uk)<br />
* '''Blackberry'''<br />
** Charger for Pearl Flip 8220, Bold 9600 (B)<br />
** Charger for Tour 9630<br />
** 5&nbsp;V 0.7&nbsp;A Model PSM04R-0500CHW1(M), RIM Part Number HDW-17957-003 (B)<br />
** 5&nbsp;V 750&nbsp;mA Model RIM-C-0004aDUUUC-001, RIM Part Number HWD-24481-001 (comes with Blackberry 9300)<br />
** 5&nbsp;V 750&nbsp;mA Model RIM-C-0004ADUUS-001 035D, Single port plug. (Tested with USB B to Micro USB cable from Logitech H760 Headset)<br />
** 5&nbsp;V 2&nbsp;A Model PSAC10R-050QT, RIM Part Number HDW-34725-001<br />
** 5&nbsp;V 550&nbsp;mA curve 8520 charger works with raspberry pi Model B Board v. BS1233. It does not work with Raspbmc image.Symtoms are frequent key board and external hdd disconnects.<br />
* '''Deal Extreme'''<br />
** [http://dx.com/p/5v-2a-regulated-switching-power-supply-110-220v-94518 S-10-5 5&nbsp;V 2&nbsp;A Regulated Switching Power Supply (110~220&nbsp;V)] (DIY: requires additional micro-USB connector and wiring)<br />
* '''Dell'''<br />
** USB Hub integrated in Dell monitors (B)<br />
* '''The FX Factory'''<br />
** 5&nbsp;V 1&nbsp;A (1.2&nbsp;A max) AC Travel Charger Model KJ-USB Mains. Typically provides 4.9&nbsp;V at 1&nbsp;A <ref>[http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/USBPowerSupplies.html http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/USBPowerSupplies.html]</ref><br />
* '''Garmin'''<br />
** 5&nbsp;V 1&nbsp;A charger (Model: PSA105R-050Q) supplied with Garmin Edge 800 GPS. Requires a USB-A to MicroUSB-B cable. Belkin 6&nbsp;ft cable (F3U151B06) works.<br />
* '''Globe Electric'''<br />
** 2-Outlet Tap with Surge Protection and 2 USB Chargers ([http://globe-electric.com/product/2-outlet-tap-with-surge-protection-and-2-usb-chargers-grounded-white/ 46082]). Rated at 1000&nbsp;mA. 120&nbsp;V systems only.<br />
* '''Griffin'''<br />
** Power Block Model P2417. 5&nbsp;V 2.1&nbsp;A<br />
** Power Block Model P1190R2 Two USB 5&nbsp;V Outputs, 1&nbsp;A each<br />
* '''Hama'''<br />
** 1000&nbsp;mA Travel Charger for Micro USB universal (barcode nr: 4 007249 935854)<br />
* '''Hartig + Heiling GmbH & Co. KG'''<br />
** H+H SN 6 USB<br />
* '''HP'''<br />
** 5.3&nbsp;V 2&nbsp;A Charger for HP Touchpad (B)<br />
* '''HTC'''<br />
** 5&nbsp;V 1&nbsp;A TCP-300 USB phone charger (B)<br />
** 5&nbsp;V 1&nbsp;A TC B250 USB charger (HTC R/N: 79H00096-00M)<br />
** 5&nbsp;V 1&nbsp;A TC E250 USB charger (HTC R/N: 79H00098-02M)<br />
* '''i-box (Philex Electronic Ltd)'''<br />
** 5&nbsp;V 1&nbsp;A USB charger, 1 USB socket, no USB lead supplied, Model: 76971HS/02 (available from ASDA and others in the UK) (B).<br />
* '''IDAPT'''<br />
** [http://www.idaptweb.com/universal_chargers/i4/ i4 multi device charger] - 3 interchangeable device tips + USB A socket ([https://twitter.com/andrewmk/status/226057302879375361 see it in use])<br />
* '''Innergie'''<br />
**15&nbsp;W Dual USB Adapter. Model: mMini AC15. Output: 5&nbsp;V, 3&nbsp;A (max per port), 15&nbsp;W max. [http://www.myinnergie.com/DuoPowerKit/specification.aspx Specification sheet]<br />
* '''Kodak'''<br />
** 5&nbsp;V 1&nbsp;A TESA5G1-0501200<br />
** 5&nbsp;V 1.0&nbsp;A K20-AM<br />
* '''LG'''<br />
** 4.8&nbsp;V 1&nbsp;A Travel Adapter<br />
** 5.1&nbsp;V 0.7&nbsp;A Travel Adapter (Model: STA-U34WVI)<br />
** 5.1&nbsp;V 0.7&nbsp;A Travel Adapter (Model: STA-U12ER)<br />
* '''Logic'''<br />
** 4 port USB Hub (Model LP4HUB10). (Raspberry Pi running from USB Hub port, red power line (+5&nbsp;V) inside hub cut) (B)<br />
*'''LogiLink'''<br />
**5&nbsp;V 2.1&nbsp;A Switching power supply, model PA0040 (B)<br />
* '''Logitech'''<br />
** 5&nbsp;V 1&nbsp;A SDC115-USB Remote Control Charger and cable<br />
* '''Maplin Electronics'''<br />
** 5&nbsp;V 1&nbsp;A dual USB power supply, model number H25B-MT-K2<br />
** Micro USB Power Supply N19HX<br />
* '''Medion'''<br />
** 5&nbsp;V 1&nbsp;A USB power supply for OYO ebook reader<br />
* '''Microsoft'''<br />
*** Zune Zune AC Adapter v2 <br />
* '''Motorola'''<br />
** [http://www.amazon.com/Motorola-Micro-USB-Home-Travel-Charger/dp/B004EYSKM8/ 5&nbsp;V 0.85&nbsp;A SPN5504 Charger with Cable]<br />
* '''Noname'''<br />
** 5&nbsp;V 2.1&nbsp;A KMS-AC09 4 port USB charger (B) [http://www.miniinthebox.com/kms-ac09-universal-ac-adapter-for-ipad-ipad-2-iphone-white_p208568.html]<br />
** 5.2&nbsp;V 1&nbsp;A MW-3NU10GT - no cable, but this one works well (1m): [http://www.amazon.de/gp/product/B005L8VELA]<br />
** 5&nbsp;V 1&nbsp;A Model H-IP008 Serial No. H10T80L068<br />
* '''Novatel Wireless'''<br />
** 5&nbsp;V 1.05&nbsp;A Charger, model number SSW-1811, packaged with Verizon Wireless MiFi device<br />
* '''Orange'''<br />
** 5&nbsp;V 0.7&nbsp;A Charger for Orange San Francisco<br />
* '''Palm'''<br />
** 5&nbsp;V 1&nbsp;A Charger for Palm Pixi+ (B)<br />
* '''Pantech'''<br />
** 5.0&nbsp;V 1&nbsp;A CNR USB with LG DLC100 micro USB cable<br />
* '''Petzl'''<br />
** 5.0&nbsp;V 1&nbsp;A Charger that came with the Tikka core2 XP<br />
* '''Phihong'''<br />
** Switching Power Supply. Model: PSAC09R-050. Output: 5&nbsp;V, 1.8&nbsp;A, microUSB. [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]<br />
* '''PortaPow'''<br />
** PortaPow UK Mains Wall Power Supply<br />
* '''PowerGen'''<br />
** PowerGen Dual Port USB 2.1A 10W AC Travel Wall Charger. [http://www.amazon.com/gp/product/B0073FCPSK Amazon Link]<br />
* '''Rayovac'''<br />
** Universal USB Charger Model: PS69 100-240 VAC to 5 V 1 A (small cube w/folding plug) works w/wireless keyboard/mouse and mini-Wifi connected<br />
* '''RS Components'<br />
** HNP06UK (RS 7263069) Switching Adapter 5.0&nbsp;V 1200&nbsp;mA<br />
* '''Samsung'''<br />
** 5&nbsp;V 0.7&nbsp;A Charger for Galaxy S model ETA0U10EBE<br />
** 5&nbsp;V 0.7&nbsp;A Charger for Galaxy SII<br />
** 5&nbsp;V 1&nbsp;A Charger for Galaxy SIII<br />
** 5&nbsp;V 1&nbsp;A Charger for Galaxy Nexus<br />
** 5&nbsp;V 0.7&nbsp;A Charger for Galaxy S Vibrant (SGH-T959)<br />
** 5&nbsp;V 0.7&nbsp;A Travel Adapter model ATADU10EBE<br />
** 5&nbsp;V 1&nbsp;A? Samsung C Series TV USB-port for external HDDs. Running stable with openelec<br />
** 5&nbsp;V ?A (Unknown) Samsung Service Port (USB) on LN32A330J1DXZA 720p 32 inch HDTV <br />
** 5&nbsp;V Unknown Ampere Samsung UA22D5000 & UA32D5000 TV USB Port. Test with Raspbian Wheezy, Raspbmc, and RPITC<br />
* '''Shun Shing'''<br />
** 100-240&nbsp;VAC to 5&nbsp;VDC 1&nbsp;A USB power supply, model SP5Q-AU [http://jaycar.co.nz/productView.asp?ID=MP3455 Jaycar]<br />
* '''Sony Ericsson'''<br />
** 5&nbsp;V 0.7&nbsp;A Charger CST-80<br />
** 5&nbsp;V 0.85&nbsp;A Greenheart&#153; Charger EP800. Typically provides 4.8&nbsp;V at 0.85&nbsp;A <ref>[http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/USBPowerSupplies.html http://www.cpmspectrepi.webspace.virginmedia.com/raspberry_pi/MoinMoinExport/USBPowerSupplies.html]</ref>.<br />
* '''StarTech'''<br />
** 4 Port USB 2.0 Hub Raspberry Pi can be powered just by plugging USB input into the Raspberry Pi, don't need power in micro USB port.<br />
* '''Travel Charger'''<br />
** 5&nbsp;V 2.0&nbsp;A USB Power Adapter, [http://www.amazon.co.uk/gp/product/B0065JCIPU/ Amazon Link]<br />
* '''Technika'''<br />
** 5&nbsp;V 1&nbsp;A USB Power Adapter, model MPASS01 (B)<br />
* '''The Pi Hut'''<br />
** Micro USB Power Supply for the Raspberry Pi. 5&nbsp;V 1000&nbsp;mA (from [http://thepihut.com/collections/power-supplies The Pi Hut's Raspberry Pi Store]) (also from [http://www.ebay.co.uk/itm/330844162509 eBay ])<br />
* '''Trisonic'''<br />
** TS-CP600T - MICRO USB HOME & TRAVEL CHARGER (5&nbsp;V, 800&nbsp;mA) $3 at Daiso U.S. stores.<br />
* '''TruePower'''<br />
** [http://u-socket.com/ U-Socket] 5&nbsp;V 2.1&nbsp;A AC Receptacle with Built-in USB ports (2.1&nbsp;A per USB port) model ACE-7169<br />
* '''Voltcraft'''<br />
** SPS5-12W, 2500&nbsp;mA, requires additional USB <-> miniUSB adapter/cable, works perfectly (bought from [http://www.conrad.de/ce/de/product/512660/VOLTCRAFT-SPS5-12W-Steckernetzteil-Steckernetzgeraet-5-VDC-2500-mA-12-Watt Conrad Shop])<br />
<br />
===Problem power Adapters===<br />
* '''Nokia'''<br />
** 5&nbsp;V 1.2&nbsp;A AC-10A & AC-10E Chargers only provide 4.8V at TP1 & TP2<br />
** [http://accessories.nokia.com/products/nokia-fast-usb-charger-ac-16/ 5&nbsp;V 1&nbsp;A AC-16E Charger] Provides only 4.7V across TP1 & TP2 when at idle<br />
<br />
* '''Masterplug'''<br />
** Masterplug Surge Protected USB Adaptor 2 x 1&nbsp;A USB Polished Black - USB ports and Ethernet don't work with this adapter and some screen artefacts using HDMI.<br />
* '''Monoprice'''<br />
** 5&nbsp;V, 2&nbsp;A 3 Outlet Power Surge Protector Wall Tap with 2 Built-In USB Charger - some display artifacts, sometimes unable to find mouse, some failures to boot. Measured to less than 4.75&nbsp;V between TP1 and TP2 when used with a Monoprice cable.<br />
* '''Sony Ericsson'''<br />
** 5&nbsp;V, 850&nbsp;mA EP800. Some failures to boot, Ethernet loops at boot.<br />
<br />
===Working external Battery packs (with 5&nbsp;V regulated output)===<br />
* '''Anker Astro3'''<br />
** Anker Astro3 10000&nbsp;mAh with dual 2&nbsp;A USB output<br />
* '''Duracell'''<br />
** PPS2 Instant USB Charger<br />
* '''Energizer/XPAL'''<br />
** XP18000 18000&nbsp;mAh Power Pack<br />
* '''Generic - eBay no brand'''<br />
** 6000T Pocket Power 5000&nbsp;mAh - eBay item 271009959140<br />
** Power Bank for iPad/iPhone 5000&nbsp;mAh (looks the same as a New Trent IMP50D or TeckNet iEP380) - eBay item 280914455938<br />
* '''Mophie'''<br />
** 38113BBR Juice Pack Powerstation 4000 mAh: output 2.1 A max: included charging cable powers RPi, 7.5 hrs light use w/keyboard and mini-Wifi on RPi ports<br />
* '''New Trent'''<br />
** iCurve IMP70D 7000&nbsp;mAh (Approx 12&nbsp;hours from full charge)<br />
** IMP120D 12000&nbsp;mAh<br />
* '''Sinoele'''<br />
** Movpower - Power Bank 5200&nbsp;mAh (8&nbsp;hours with Wi-Fi active)<br />
* '''TeckNet'''<br />
** iEP387 Dual-Port 7000&nbsp;mAh External Power Bank (The charging lead can be used to connect the Tecknet to the Raspberry Pi. Ran the Raspberry Pi with Wi-Fi dongle and wireless keyboard receiver for over 9 hours of light use.)<br />
** iEP392 Dual-Port 12000&nbsp;mAh External Power Bank (1&nbsp;A port, ~16.5 hours)<br />
** Rayovac PS60 5&nbsp;V 800&nbsp;mAh<br />
* '''VINZO'''<br />
** Power Bank 5000&nbsp;mAh Grey Output 5&nbsp;V 1000&nbsp;mA<br />
* '''Kodak Power Pack KP1000'''<br />
** 1&nbsp;A USB rechargeable battery pack - see [http://blog.sheasilverman.com/2012/09/its-alive/ Shea Silverman's blog]<br />
<br />
== Display adapters ==<br />
Note that active converter boxes may draw power through the HDMI port, and thus will put an extra load on your PSU, and also increase the current running through the Raspberry Pi's primary input fuse. HDMI ports (and the raspberry PI) are designed so that they deliver a very limited amount of power (50&nbsp;mA) to the TV/Monitor/display-adapter and much more isn't in theory allowed. In fact there is a diode (D1) in series with the power line which can only handle 200&nbsp;mA, if the adapter tries to draw much more than that the diode might fail. Therefore only externally powered adapters are to be recommended. Despite this, many people report success with non externally powered devices. If you have bought a non externally powered HDMI to VGA adapter, and you experience problems with it (It behaves badly, D1 burns out, F3 "blows", or your PSU overloads), then not all is lost, there are cheap (a few dollars) adapters that allow you to add external power to the HDMI cable! An example can be found here: [http://dx.com/p/hdmi-male-to-hdmi-female-adapter-w-power-input-port-black-155361].<br />
<br />
===HDMI->DVI-D cables===<br />
HDMI to DVI-D cables, or HDMI cables with an DVI-D adapters should work, connected to a DVI-D monitor, that is because both HDMI and DVI use the same kind of digital signaling (LVDS). The only limitation being that DVI-D misses the signal channel for audio.<br />
<br />
There are three kinds of DVI. There is DVI-D, a digital signal fully compatible with HDMI, so a passive cable can be used. There is DVI-I, which is a connector with both analog pins and digital pins. An HDMI to DVI-D adapter fits in a DVI-I female connector. Finally, there is DVI-A. This a fairly rare connection, but occasionally it will be found on some monitors and is an analog interface, in fact the same as VGA!<br />
<br />
Some adapters like Farnell part AK-CBHD03-BK are HDMI to DVI-I, which, while not fitting in a DVI-D monitor, are still compatible. The analog pins simply must be bent.<br />
<br />
The HDMI to DVI-D cable provided by Apple with the 2010 Mac Mini worked. It does not appear this adapter can be purchased separately.<br />
<br />
* '''The Pi Hut'''<br />
** HDMI to DVI Cable for the Raspberry Pi (from [http://thepihut.com/collections/video-output/products/hdmi-to-dvi-cable-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
* '''Other Variants'''<br />
** AmazonBasics HDMI to DVI Adapter Cable (model SK231) works and is inexpensive.<br />
** [http://www.ebay.com/itm/DVI-Female-to-HDMI-Male-Adapter-Converter-Adaptor-Gold-for-HDTV-Full-HD-/320946033059?pt=US_Video_Cables_Adapters&hash=item4ab9dfd1a3 A generic HDMI-to-DVI converter from eBay]. Works well, but it's probably the cause of some power loss between the Raspberry Pi and the monitor, causing [http://elinux.org/R-Pi_Troubleshooting#Interference_visible_on_a_HDMI_or_DVI_monitor this] problem. A setting of config_hdmi_boost='''5''' in /etc/boot solved this. Note that config_hdmi_boost='''4''', as suggested in the troubleshooting guide, helped, but it did not solve the problem completely.<br />
<br />
===HDMI->VGA Cables===<br />
HDMI to VGA cables <strong>do not work!</strong> <br />
They rely on logic incorporated in a videocard that isn't available in a PI.<br />
Somehow such a videocard outputs analog signal on the otherwise purely digital HDMI connector, that seems to be the only way for it to work.<br />
But normally HDMI cables <strong>never</strong> carry analog signals and the PI surely doesn't output analog signals either, almost no HDMI output device does, as its completely against HDMI specifications.<br />
<br />
===HDMI->VGA converter boxes===<br />
HDMI to VGA <strong>converters</strong> do work, they convert the digital serial data streams from HDMI and using complex logic, and digital to analog converters they convert the HDMI signal to the analog signals needed for VGA, and sometimes also convert HDMI audio to an analog stereo signal. But note that if they feed off the PI it can cause a problem, as the PI only is designed to provide about 50mA to the (HDMI or DVI-D) monitor, and these adapters use >200mA, while the absolute maximum the PI can let through is 200mA.<br />
These adapters also thus use about half the energy that the PI (without USB devices) uses.<br />
Therefore its much better to use an adapter that has an external power input. Alternatively there are HDMI dongles (male to female HDMI adapters) that have a barrel input connector to feed the adapter with.<br />
<br />
Most will require use [[RPi_config.txt]]. Start off with hdmi_safe=1.<br />
<br />
[http://www.element14.com/community/groups/raspberry-pi/blog/2012/08/16/raspberry-pi-hdmi-to-vga-converter Sanoxy HDMI to VGA converter], $27 from Amazon, no changes required with official Raspbian Wheezy image (2012-Jul-15), note: had already disabled overscan previously<br />
<br />
http://www.amazon.co.uk/gp/product/B007KEIRNG -- "Neewer" HDMI to VGA -- some issues discussed below:<br />
However, according to user "Tom1989" the same Neewer HDMI to VGA adapter burned out BAT54 Schottky diode D1 on the Raspberry Pi and broke its HDMI output: [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9819 Serious HDMI Problems. What's that smell? Burning Raspberry!]. On that thread, "mahjongg" suggested the NXP (or equivalent) PMEG2010AET as a high-current replacement for D1. The PMEG2010AET has 1&nbsp;A max forward current, much greater than the BAT54's 200&nbsp;mA limit which may be exceeded by your HDMI -> VGA converter. Remember that the converter's current must come from your Raspberry Pi power supply and go through the Micro USB cable and polyfuse F3, so you may get extra voltage drops and/or cause F3 to trip depending on how much current the converter uses. As always with board modifications, YMMV. Also on the "Burning Raspberry!" thread, user "pwinwood" reported the Neewer's current to be 400&nbsp;mA, which is twice the limit of BAT54 diode D1. "pwinwood" also took the Neewer apart and added its own +5&nbsp;V connection adapted from a USB cable, which bypasses Raspberry Pi's Micro USB cable and polyfuse F3.<br />
<br />
* Link to a gallery with detailed images & steps of the same adapter modification: [http://imgur.com/a/sLogs/all HERE] --''by [[User:Pinoccio|Pinoccio]]''<br />
<br />
http://www.amazon.co.uk/KanaaN-Adapter-Converter-Cable-Resolutions/dp/B007QT0NNW -- "Kanaan" HDMI-VGA<br />
<br />
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130699741793 -- eBay is swarming with $16 converters all like this one.<br />
<br />
This adapter -- http://www.ebay.co.uk/itm/300692770623 -- works from 640x480 up to 1920x1080, audio over HDMI works too.<br />
Sadly the IC's on the PCB have all been scrubbed.<br />
Requires HDMI boost and overscan, [[RPi_config.txt|config.txt]] settings for 640x480 @60&nbsp;Hz:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=4<br />
<br>config_hdmi_boost=4<br />
<br>overscan_top=-30<br />
<br>overscan_bottom=-30<br />
<br>overscan_left=-30<br />
<br>overscan_right=-30<br />
<br />
According to user "Mortimer" -- HDFuryPro HDMI to YPbBr/VGA Converter found on Amazon -- http://www.amazon.co.uk/Inputs-Component-Video-YPbPr-Converter/dp/B00797ZZ4S/ -- Works with Raspberry Pi. Tested against a Philips 170B 1280x1024 LCD monitor, producing a full native resolution image. Not tested against a Component Video TV yet, and audio has yet to be got working.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
<br />
According to user "Mortimer" -- HDFury1 1080p HDMI to VGA Converter from HDFury.com. I'm not sure the HDFury1 can be got a hold of easily nowadays, I happened to have access to one to try out. HDFury2, 3 and 4 are available as far as I can tell, but it is very pricey compared to the alternatives. HDFury1 was around £80 when we bought one for a project at work. HDFury2 seems to be around £130, 3 and 4 are getting on towards £200 or more. So not to be recommended as a solution unless you happen to have one lying around. I don't believe there is any relationship between the company that produces these and the HDFuryPro I bought for myself (See above). I didn't alter any config settings, just plugged it in. It doesn't work without having its external power supply connected, as it requires 0.4&nbsp;A, which is too much draw for the 5&nbsp;V supply available from the HDMI socket on the Raspberry Pi. Its power LED lights, but no picture is produced. In comparison to the HDFuryPro this picture from this device is sharper, but it is not enough to justify the extra cost.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
http://www.amazon.co.uk/gp/product/B007SM7O2U/ref=oh_details_o02_s00_i00 - "Cable Matters"<br />
<br />
Here It is another option: http://www.dealextreme.com/p/hdmi-v1-4-male-to-vga-female-converter-adapter-cable-white-15cm-130458, is cheap (it's free shipping from china) and works perfectly, I tested it with an Acer VGA monitor (AL1511), without no change in my XBMC distribution.<br />
The config.txt for Raspbian (Flatron VGA monitor 1024 * 768):<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=16<br />
<br>hdmi_force_hotplug=1<br />
<br>disable_overscan=0<br />
<br />
<br />
And another one: http://cgi.ebay.pl/ws/eBayISAPI.dll?ViewItem&item=251086464644. It is very cheap, but it works perfectly. No config.txt changes was needed at all. I've booted Raspbian and OpenELEC. Monitor is detected correctly and the optimal resolution is set (Raspbian) or you can change the res in the menu (OpenELEC). <br />
The /opt/vc/bin/tvservice is able to read monitor edid data. I tested the adapter using NEC 72VM 15" LCD. (1280x1024 60&nbsp;Hz, 1024x768 60&nbsp;Hz, 640x480 works) The adapter is based on Lontium LT8511A chip, but I was unable to get the specification for it.<br />
The D1 diode is getting very hot though. Most likely the adapter drives more than 200&nbsp;mA. The standard RS Components 1.2&nbsp;A USB power supply is able to provide enough power for the Raspberry Pi and the adapter. I'll try to modify the adapter to connect external power to bypass D1.<br />
Marcin.<br />
<br />
===DVI-D -> VGA active adapters===<br />
None are currently listed<br />
<br />
===Composite->SCART===<br />
SCART adapters (SCART plugs with three RCA connectors in the back), will probably work when used with the yellow RCA plug connected to the Raspberry Pi's RCA video output. Additionally using a splitter cable (3.5&nbsp;mm jack plug on one end, and red-white RCA plugs on the other end) will probably work when plugged into the red and white (left and right audio channels) of the SCART adapter.<br />
<br />
* Generic - works<br />
<br />
===Composite->VGA converter boxes===<br />
* [http://www.extron.com/product/product.aspx?id=dvs204| Extron DVS-204] - works no problem!<br />
<br />
== SD cards ==<br />
<br />
The SD card section has been moved to a separate page. See [[RPi SD cards]]<br />
<br />
== Foreign Language Translations ==<br />
* [[Ru:RaspberryPiBoardVerifiedPeripherals]]<br />
<br />
== References ==<br />
<references><br />
</references><br />
<br />
{{Template:Raspberry Pi}}<br />
♦</div>Lob0426https://elinux.org/index.php?title=RPi_HardwareHistory&diff=212240RPi HardwareHistory2013-01-20T06:00:01Z<p>Lob0426: /* Board Revision History */</p>
<hr />
<div>[[Category:RaspberryPi]]<br />
{{Template:RPi_Hardware}}<br />
<br />
==Board Revision History==<br />
Find out your board revision with the following command:<br />
cat /proc/cpuinfo<br />
You will see your device data including:<br />
Hardware : BCM2708<br />
Revision : 0003<br />
<br />
Newest revision at the top of the list.<br />
<br />
{| border="1"<br />
! Release Date<br />
! Model A/B<br />
! PCB Revision<br />
! Build Revision<br />
! Notes<br />
<br />
|-<br />
| Q4 2012<br />
| B<br />
| 2.0<br />
| 0005 (?) 000f<br />
| 512MB RAM<br />
|-<br />
| Q3 2012<br />
| B<br />
| 2.0<br />
| 0004<br />
| <br />
|-<br />
| Q3 2012<br />
| B<br />
| 1.0<br />
| 0003<br />
| ECN0001<br />
|-<br />
| Q1 2012<br />
| B<br />
| 1.0<br />
| 0002<br />
|<br />
|-<br />
| Q1 2012<br />
| B<br />
| Beta<br />
| Beta<br />
| Beta Board<br />
|}<br />
<br />
===Model B Revision 2.0===<br />
Based on a new PCB layout that includes previous build fixes from ECN0001 such us removal of the poly-fuses in series with the +5V power for USB devices, and other fixes reported by the community such as the erroneous connection of the LAN9512 VDD18CORE pins to the +1V8 power plane, addition of the 8-pin P5 header (non-populated) for extra GPIO pins, addition to the 2-pin P6 header (non-populated) for a RESET button, and other changes and improvements reported in more detail <ref name="REV2.0">[http://www.raspberrypi.org/archives/1929 Upcoming Board Revision]</ref>.<br />
<br />
===ECN0001===<br />
ECN0001 is the request to not fit D14 and replace F1 and F2 with 0 ohm.<br />
====D14 Removal====<br />
D14 can interfere with some CEC devices if the Pi is left plugged in and unpowered. The benefits of having it are minimal so it was removed.<ref name="D14">[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=16365 New Pi missing D14]</ref><br />
<br />
====F1 & F2 Replacement/Removal====<br />
F1 & F2 can cause problems with some USB devices which draw high current. In particular due to the recovery characteristics of the Poly-fuses, it can take a while to recover their low resistance state afterwards, adding additional problems for other devices (lower voltage on the USB bus).<br />
<br />
==Raspberry Pi Model-A Full Production Board ==<br />
* Announced: Not Yet (as of 16 June 2012)<br />
* Board will now have 256Mb of RAM rather than the originally planned 128Mb<ref name="postSale">[http://www.raspberrypi.org/archives/723 Post-Launch - And breathe…]</ref><br />
* Foundation will probably produce a small Beta batch before handing manufacturing over to RS and Farnell<br />
<br />
==Raspberry Pi Model-B Full Production Board ==<br />
[[File:RaspiFront.JPG|250px|thumb|right|The Rpi full production board (model B Rev 2.0)]]<br />
* Announced: April 2012, first orders sent out June 2012.<br />
* Manufacturing and Orders will be made through RS and Farnell<br />
* This means a much higher volume of units will be produced and made available.<br />
* Additional detail is available about the manufacturing and distribution agreement here [http://hardware.slashdot.org/story/12/02/28/2347222/raspberry-pi-now-has-distributors----and-will-soon-have-boards-for-all-video video interview between Eben Upton and SlashDot here (28/02/12)].<br />
* Announced: September 2012, Raspberry Pi Model B Rev 2.0 is now manufactured at Sony's manufacturing plant on Pencoed, South Wales. [http://www.raspberrypi.org/archives/1925 Full announcement from the Raspberry Pi Foundation], [http://www.element14.com/community/thread/19738?tstart=0 Element14 announcement on Raspberry Pi discussion board].<br />
<br />
==Raspberry Pi 1st Production Board ==<br />
* Announced: 29th Feb 2012 - Start of Sale Only<ref name="postSale"/><br />
* Credit-card Format<br />
* Initial 10k Batch (All Model-B's) Manufactured in China (Jan/Feb 2012)<ref name="firstProduction" >[http://www.raspberrypi.org/archives/509 We’ve started manufacture!]</ref><br />
* Should look identical to the Raspberry Pi Beta Board below (except different SDCard holder).<br />
* The board has a yellow RCA connector, rather than the black one used in the Beta's.<br />
* Nokia/Qt Development group has donated vouchers for 400 RPi units for developers<ref name="nokiaDonate">[http://www.raspberrypi.org/archives/369 Nokia has Raspberry Pi vouchers for 400 Qt developers]</ref><br />
* The batch was delayed several weeks due to the RJ45 network connector being substituted for the wrong part<ref>[http://www.raspberrypi.org/archives/781 Manufacturing Hiccup]</ref> and also so the board could undergo compliance testing<ref>[http://www.raspberrypi.org/archives/852 Compliance testing]</ref><br />
<br />
==Raspberry Pi Beta Production Board ==<br />
* Announced: December 2011<ref name="#Beta">[http://www.raspberrypi.org/archives/422 Populated boards: an update on where we are]</ref><br />
* Credit-Card Format<br />
* Manufactured in UK<br />
* Produced 100<ref name="betapcb">[http://www.raspberrypi.org/archives/389 We have PCBs! BETA]</ref> PCBs<br />
* Characteristic feature of hand-modded correction to PCB <ref name="betaError">[http://www.raspberrypi.org/archives/470 (hand-mod) More on the beta boards]</ref><br />
* See the [http://www.raspberrypi.org/archives/482 blog post] which includes a video explaining how the production units will differ from the beta boards.<br />
<br />
<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/12/Picture-002-copy2-e1322775411416.jpg Pre-production board (beta board) PCB, topside]<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/12/Picture-003-copy2.jpg Pre-production board (beta board) PCB, underside]<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/12/Picture-001-copy.jpg Pre-production board vs credit-card]<br />
<br />
<br />
===eBay Auction===<br />
10 of the completed Model-B boards were auctioned on eBay (Started on 1st Jan 2012) <ref name="betaebay">[http://www.raspberrypi.org/archives/482 We’re auctioning ten beta Raspberry Pis!]</ref>)<br />
{| border="1"<br />
|SerialNo:<br />
|#1<br />
|#2<br />
|#3<br />
|#4<br />
|#5<br />
|#6<br />
|#7<ref name="#7Donated"/><br />
|#8<ref name="#8PaulMaunders"/><br />
|#9<br />
|#10<br />
|-<br />
|Date:<br />
|11-Jan-2012<br />
|11-Jan-2012<br />
|10-Jan-2012<br />
|10-Jan-2012<br />
|09-Jan-2012<br />
|09-Jan-2012<br />
|08-Jan-2012<br />
|08-Jan-2012<br />
|07-Jan-2012<br />
|07-Jan-2012<br />
|-<br />
|Sold For:<br />
|£3,500<br />
|£2,150<br />
|£2,257<br />
|£1,550<br />
|£1,040<br />
|£1,000<br />
|£989<br />
|£1,020<br />
|£930<br />
|£1,900<br />
|}<br />
Board #7 was anonymously (and generously) donated to [http://www.computinghistory.org.uk/ Centre for Computing History]<ref name="#7Donated">[http://www.raspberrypi.org/archives/503 Beta board bought by anonymous bidder and donated to museum]</ref> (also spotted [http://twitpic.com/86trra here..])!<br />
<br />
Board #8 Owned by Tech Blogger, Paul Maunders, see his [http://www.pyrosoft.co.uk/blog blog] for details<ref name="#8PaulMaunders">[http://www.pyrosoft.co.uk/blog/2012/01/13/raspberry-pi-8-first-photoshoot/ Paul Maunders - Raspberry Pi #8 First Photoshoot]</ref><br />
<br />
==Raspberry Pi Alpha Board ==<br />
[[File:RPi-alpha.jpg|250px|thumb|right|RPi Alpha Board]]<br />
<br />
* Announced: August 2011<ref name="#Alpha">[http://www.raspberrypi.org/archives/78 The alpha boards are here!]</ref><br />
* Large Format for debugging (Model-B)<br />
* Populated with headers for GPIO, JTAG, DSI, CSI, as well as switches and LEDs for I/O testing.<br />
<br />
<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/08/DSCF1809.jpg Alpha prototype board, underside]<br />
<br />
==Raspberry Pi USB Prototype Board ==<br />
[[File:Rpi-usbproto.jpg|250px|thumb|right|RPi USB Prototype Board]]<br />
* Announced: May 2011<br />
* The "Computer On A USB Stick" Format<br />
* Included built-in camera<br />
* HDMI one end and single USB the other<br />
* Introduced the RPi Foundation to the world (any earlier links appreciated), featured by [http://www.bbc.co.uk/news/technology-13292450 BBC Online Video].<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
==Raspberry Pi Concept 2006 edition==<br />
[[File:RPi-atmel2006Ed.jpg|250px|thumb|right|Raspberry Pi Concept 2006 edition]]<br />
* Vero-board Prototype & PCB Version<br />
* Atmel ATmega644 microcontroller clocked at 22.1MHz<ref name="2006ed">[http://www.raspberrypi.org/archives/264 Raspberry Pi – 2006 edition]</ref><br />
<br />
==See Also==<br />
===Video===<br />
* [http://news.bbc.co.uk/1/hi/programmes/click_online/9504208.stm BBC iClick's Peter Price asks whether a £15 computer can solve the programming gap] (6 minutes, 3 June 2011)<br />
* [http://www.youtube.com/watch?v=pQ7N4rycsy4 Raspberry Pi's David Braben talks to BBC's Rory Cellan-Jones] (2:28 minutes, 5 May 2011)<br />
* [http://www.youtube.com/RaspberryPiTutorials Raspberry Pi community tutorials on YouTube]<br />
<br />
===Audio===<br />
* [http://foundationlibraries.blogspot.com/2011/06/cfl-podcast-eben-upton-raspberry-pi.html Podcast of a phone interview with Eben about the project and the motivations behind it] (15 minutes long.) (3 June 2011) Transcription [http://tomhannen.posterous.com/raspberry-pi-podcast-transcript here].<br />
<br />
==References==<br />
<references/><br />
<br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426https://elinux.org/index.php?title=RPi_HardwareHistory&diff=212234RPi HardwareHistory2013-01-20T05:59:25Z<p>Lob0426: /* Board Revision History */</p>
<hr />
<div>[[Category:RaspberryPi]]<br />
{{Template:RPi_Hardware}}<br />
<br />
==Board Revision History==<br />
Find out your board revision with the following command:<br />
cat /proc/cpuinfo<br />
You will see your device data including:<br />
Hardware : BCM2708<br />
Revision : 0003<br />
<br />
Newest revision at the top of the list.<br />
<br />
{| border="1"<br />
! Release Date<br />
! Model A/B<br />
! PCB Revision<br />
! Build Revision<br />
! Notes<br />
<br />
|-<br />
| Q4 2012<br />
| B<br />
| 2.0<br />
| 0005 (?)000f<br />
| 512MB RAM<br />
|-<br />
| Q3 2012<br />
| B<br />
| 2.0<br />
| 0004<br />
| <br />
|-<br />
| Q3 2012<br />
| B<br />
| 1.0<br />
| 0003<br />
| ECN0001<br />
|-<br />
| Q1 2012<br />
| B<br />
| 1.0<br />
| 0002<br />
|<br />
|-<br />
| Q1 2012<br />
| B<br />
| Beta<br />
| Beta<br />
| Beta Board<br />
|}<br />
<br />
===Model B Revision 2.0===<br />
Based on a new PCB layout that includes previous build fixes from ECN0001 such us removal of the poly-fuses in series with the +5V power for USB devices, and other fixes reported by the community such as the erroneous connection of the LAN9512 VDD18CORE pins to the +1V8 power plane, addition of the 8-pin P5 header (non-populated) for extra GPIO pins, addition to the 2-pin P6 header (non-populated) for a RESET button, and other changes and improvements reported in more detail <ref name="REV2.0">[http://www.raspberrypi.org/archives/1929 Upcoming Board Revision]</ref>.<br />
<br />
===ECN0001===<br />
ECN0001 is the request to not fit D14 and replace F1 and F2 with 0 ohm.<br />
====D14 Removal====<br />
D14 can interfere with some CEC devices if the Pi is left plugged in and unpowered. The benefits of having it are minimal so it was removed.<ref name="D14">[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=16365 New Pi missing D14]</ref><br />
<br />
====F1 & F2 Replacement/Removal====<br />
F1 & F2 can cause problems with some USB devices which draw high current. In particular due to the recovery characteristics of the Poly-fuses, it can take a while to recover their low resistance state afterwards, adding additional problems for other devices (lower voltage on the USB bus).<br />
<br />
==Raspberry Pi Model-A Full Production Board ==<br />
* Announced: Not Yet (as of 16 June 2012)<br />
* Board will now have 256Mb of RAM rather than the originally planned 128Mb<ref name="postSale">[http://www.raspberrypi.org/archives/723 Post-Launch - And breathe…]</ref><br />
* Foundation will probably produce a small Beta batch before handing manufacturing over to RS and Farnell<br />
<br />
==Raspberry Pi Model-B Full Production Board ==<br />
[[File:RaspiFront.JPG|250px|thumb|right|The Rpi full production board (model B Rev 2.0)]]<br />
* Announced: April 2012, first orders sent out June 2012.<br />
* Manufacturing and Orders will be made through RS and Farnell<br />
* This means a much higher volume of units will be produced and made available.<br />
* Additional detail is available about the manufacturing and distribution agreement here [http://hardware.slashdot.org/story/12/02/28/2347222/raspberry-pi-now-has-distributors----and-will-soon-have-boards-for-all-video video interview between Eben Upton and SlashDot here (28/02/12)].<br />
* Announced: September 2012, Raspberry Pi Model B Rev 2.0 is now manufactured at Sony's manufacturing plant on Pencoed, South Wales. [http://www.raspberrypi.org/archives/1925 Full announcement from the Raspberry Pi Foundation], [http://www.element14.com/community/thread/19738?tstart=0 Element14 announcement on Raspberry Pi discussion board].<br />
<br />
==Raspberry Pi 1st Production Board ==<br />
* Announced: 29th Feb 2012 - Start of Sale Only<ref name="postSale"/><br />
* Credit-card Format<br />
* Initial 10k Batch (All Model-B's) Manufactured in China (Jan/Feb 2012)<ref name="firstProduction" >[http://www.raspberrypi.org/archives/509 We’ve started manufacture!]</ref><br />
* Should look identical to the Raspberry Pi Beta Board below (except different SDCard holder).<br />
* The board has a yellow RCA connector, rather than the black one used in the Beta's.<br />
* Nokia/Qt Development group has donated vouchers for 400 RPi units for developers<ref name="nokiaDonate">[http://www.raspberrypi.org/archives/369 Nokia has Raspberry Pi vouchers for 400 Qt developers]</ref><br />
* The batch was delayed several weeks due to the RJ45 network connector being substituted for the wrong part<ref>[http://www.raspberrypi.org/archives/781 Manufacturing Hiccup]</ref> and also so the board could undergo compliance testing<ref>[http://www.raspberrypi.org/archives/852 Compliance testing]</ref><br />
<br />
==Raspberry Pi Beta Production Board ==<br />
* Announced: December 2011<ref name="#Beta">[http://www.raspberrypi.org/archives/422 Populated boards: an update on where we are]</ref><br />
* Credit-Card Format<br />
* Manufactured in UK<br />
* Produced 100<ref name="betapcb">[http://www.raspberrypi.org/archives/389 We have PCBs! BETA]</ref> PCBs<br />
* Characteristic feature of hand-modded correction to PCB <ref name="betaError">[http://www.raspberrypi.org/archives/470 (hand-mod) More on the beta boards]</ref><br />
* See the [http://www.raspberrypi.org/archives/482 blog post] which includes a video explaining how the production units will differ from the beta boards.<br />
<br />
<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/12/Picture-002-copy2-e1322775411416.jpg Pre-production board (beta board) PCB, topside]<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/12/Picture-003-copy2.jpg Pre-production board (beta board) PCB, underside]<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/12/Picture-001-copy.jpg Pre-production board vs credit-card]<br />
<br />
<br />
===eBay Auction===<br />
10 of the completed Model-B boards were auctioned on eBay (Started on 1st Jan 2012) <ref name="betaebay">[http://www.raspberrypi.org/archives/482 We’re auctioning ten beta Raspberry Pis!]</ref>)<br />
{| border="1"<br />
|SerialNo:<br />
|#1<br />
|#2<br />
|#3<br />
|#4<br />
|#5<br />
|#6<br />
|#7<ref name="#7Donated"/><br />
|#8<ref name="#8PaulMaunders"/><br />
|#9<br />
|#10<br />
|-<br />
|Date:<br />
|11-Jan-2012<br />
|11-Jan-2012<br />
|10-Jan-2012<br />
|10-Jan-2012<br />
|09-Jan-2012<br />
|09-Jan-2012<br />
|08-Jan-2012<br />
|08-Jan-2012<br />
|07-Jan-2012<br />
|07-Jan-2012<br />
|-<br />
|Sold For:<br />
|£3,500<br />
|£2,150<br />
|£2,257<br />
|£1,550<br />
|£1,040<br />
|£1,000<br />
|£989<br />
|£1,020<br />
|£930<br />
|£1,900<br />
|}<br />
Board #7 was anonymously (and generously) donated to [http://www.computinghistory.org.uk/ Centre for Computing History]<ref name="#7Donated">[http://www.raspberrypi.org/archives/503 Beta board bought by anonymous bidder and donated to museum]</ref> (also spotted [http://twitpic.com/86trra here..])!<br />
<br />
Board #8 Owned by Tech Blogger, Paul Maunders, see his [http://www.pyrosoft.co.uk/blog blog] for details<ref name="#8PaulMaunders">[http://www.pyrosoft.co.uk/blog/2012/01/13/raspberry-pi-8-first-photoshoot/ Paul Maunders - Raspberry Pi #8 First Photoshoot]</ref><br />
<br />
==Raspberry Pi Alpha Board ==<br />
[[File:RPi-alpha.jpg|250px|thumb|right|RPi Alpha Board]]<br />
<br />
* Announced: August 2011<ref name="#Alpha">[http://www.raspberrypi.org/archives/78 The alpha boards are here!]</ref><br />
* Large Format for debugging (Model-B)<br />
* Populated with headers for GPIO, JTAG, DSI, CSI, as well as switches and LEDs for I/O testing.<br />
<br />
<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/08/DSCF1809.jpg Alpha prototype board, underside]<br />
<br />
==Raspberry Pi USB Prototype Board ==<br />
[[File:Rpi-usbproto.jpg|250px|thumb|right|RPi USB Prototype Board]]<br />
* Announced: May 2011<br />
* The "Computer On A USB Stick" Format<br />
* Included built-in camera<br />
* HDMI one end and single USB the other<br />
* Introduced the RPi Foundation to the world (any earlier links appreciated), featured by [http://www.bbc.co.uk/news/technology-13292450 BBC Online Video].<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
==Raspberry Pi Concept 2006 edition==<br />
[[File:RPi-atmel2006Ed.jpg|250px|thumb|right|Raspberry Pi Concept 2006 edition]]<br />
* Vero-board Prototype & PCB Version<br />
* Atmel ATmega644 microcontroller clocked at 22.1MHz<ref name="2006ed">[http://www.raspberrypi.org/archives/264 Raspberry Pi – 2006 edition]</ref><br />
<br />
==See Also==<br />
===Video===<br />
* [http://news.bbc.co.uk/1/hi/programmes/click_online/9504208.stm BBC iClick's Peter Price asks whether a £15 computer can solve the programming gap] (6 minutes, 3 June 2011)<br />
* [http://www.youtube.com/watch?v=pQ7N4rycsy4 Raspberry Pi's David Braben talks to BBC's Rory Cellan-Jones] (2:28 minutes, 5 May 2011)<br />
* [http://www.youtube.com/RaspberryPiTutorials Raspberry Pi community tutorials on YouTube]<br />
<br />
===Audio===<br />
* [http://foundationlibraries.blogspot.com/2011/06/cfl-podcast-eben-upton-raspberry-pi.html Podcast of a phone interview with Eben about the project and the motivations behind it] (15 minutes long.) (3 June 2011) Transcription [http://tomhannen.posterous.com/raspberry-pi-podcast-transcript here].<br />
<br />
==References==<br />
<references/><br />
<br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426https://elinux.org/index.php?title=RPi_VerifiedPeripherals&diff=183914RPi VerifiedPeripherals2012-10-23T23:43:44Z<p>Lob0426: /* Working USB Wifi Adapters */</p>
<hr />
<div>[[Category: Linux]]<br />
[[Category: ARM Development Boards]]<br />
[[Category: Broadcom]]<br />
[[Category: Development Boards]]<br />
[[Category: RaspberryPi]]<br />
[[Category: Education]]<br />
{{Template: RPi_Hardware}}<br />
<br />
<br />
'''A note about this page: For USB devices, please specify if they required a powered hub'''<br />
==Notes==<br />
<br />
19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the [http://www.raspberrypi.org/downloads default Debian distribution] unless stated otherwise. A suggested suffix markup scheme is as follows:<br />
<br />
* (A) - Relates to model A production board<br />
* (B) - Relates to model B production board<br />
* (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different<br />
* No markup - relates to all production boards<br />
<br />
''Discuss: [http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247 http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247]''<br />
<br />
If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order.<br />
<br />
==Power Usage Notes==<br />
{{Warning|Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the RPi. If the RPi's supply voltage falls below a certain value (anecdotally stated as around 4.75V), or it begins to fluctuate, your setup may become unstable. There is a [http://elinux.org/RPi_Hardware#Power Wiki section about this issue] which is worth a read.}}<br />
<br />
'''Model B Hardware Revisions and USB Power limits'''<br />
'''Hardware Revision 1.0'''<br />
The original Model B board had current limiting polyfuses which limited the power output of each USB port to approximatly 100mA. USB devices using more than 100mA had to be connected via a powered hub. The PI's PSU was chosen with a power budget of 700mA of which 200mA were assigned to the USB ports, so the Raspberry Pi's (poly)fuses were designed only for devices up to 100mA, and typical 140mA polyfuses will have as much as 0.6 volt across them when drawing currents near the 100mA limit. As a consequence the USB ports are only directly suitable for "single current unit" USB devices which, according to USB specifications, are designed to work with just 4.4 Volt. Not only do non single current unit devices draw more current (causing greater Voltage drops, and greater stress on the fuses), they also might require 4.75 Volt to work.<br />
<br />
'''Model B Hardware Revision 2.0 and Revision 1.0 with ECN0001 change'''<br />
This had the polyfuses removed, removing the 100mA current limitation for each USB port (but leaving the main fuse F3 intact). Users should still ensure their power supply can power the RPi and the USB peripherals. Revision 2.0 was released in August 2012.<br />
<br />
==Linux Driver Issues==<br />
Shortly after the Raspberry Pi was released it was it was confirmed that there were a number of issues with the Linux USB driver for the SMSC95xx chip. These included problems with USB 1.x peripherals that use split transactions, a fixed number of channels (causing problems with Kinect) and the way the ARM processor handles the SMSC95xx interrupts. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097&start=76] [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=5249&start=44]<br />
A large number of fixes were included in the 2012-08-19-wheezy-raspbian Linux image.<br />
<br />
== Powered USB Hubs ==<br />
A number of low-cost powered USB hubs are known to have caused problems. Members of the Raspberry Pi forums have reported low power or no power at all in some cases. The following is a list of specific Powered USB Hubs which appear to be fault-free. Please note that these do not take into account powering the Raspberry Pi from the hub, in addition to its peripherals.<br />
<br />
If you use a powered hub and PI PSU together consider powering them from the same power bar with switch, so you can turn them on simultaneously., especially if the HUB tries to feed the PI through their interconnect cable, due to the 100mA limiting fuse in the PI the PI will be partially powered which may cause problems (unwanted writes to the SD card).<br />
<br />
===Working USB Hubs===<br />
*'''Acme'''<br />
** USB 2.0 hub 4 port ([http://www.acme.eu/en-us/product/019188 ACME]) Based on NEC μPD720114 USB2.0 Hub Controller USB ID 0409:005a '''NOTE!''' It is bus-powered hub, but very cheap and small and works after a small modding: on usb-hub board you have 4 holes: V, D+, D- and GND. Connect GND, D+ and D- to the RasPI, and additionally connect GND and +5v from power supply to the same holes on usb-hub GND and V. Now there is common contacts: GND, D+ and D- between RasPI and hub needed to work, and additional power for USB devices, connected to the hub. Tested on my RasPI.<br />
*'''Belkin'''<br />
** F4U040 4-Port Ultra-Slim Desktop hub (powered 5v, 2.6A, lsusb lists as Genesys Logic 05e3:0608)<br />
** F5U224 4 port powered USB hub<br />
** F5U231/F5U234 Hi-speed USB 2.0 Tertrahub - 4 port powered USB hub (verified.. able to power Raspberry Pi using micro USB directly from hub)<br />
** F5U237 7 Port powered USB 2.0 5V 3.8A (5 back port 2 top ports)<br />
** F5U259-ME USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time)<br />
** F5U403 USB 2.-0 4 Port Hub (Powered, suspect see F5U404 in non-working, didn't test power the RPi from hub.)<br />
** F5U700 USB 2.0 7-Port Hub (Powered, able to power Raspberry Pi via micro USB directly from hub)<br />
** F5U706ea/uk 2-in-1 Hub (USB 2.0, powered, 7-port)<br />
** F5U706701PerBlk 7-in-1 Hub (USB 2.0, powered 5V 2.5A , 7-port)<br />
** F4U039qukAPL 7 port Ultra-Slim Desktop Hub (internally two Genesys Logic 05e3:0608 devices - powering RPi from port furthest away from power supply. Toshiba Stor.E 1TB must be powered from ports closest to the power supply to avoid errors in dmesg. Flash drives seem fine on ports away from the power supply.)<br />
*'''Benq'''<br />
** E2220HD LCD Monitor with 4 port USB Hub. Able to power the Pi and no backfeed of power from the monitor to the Pi via the interconnect. Just works.<br />
*'''Biltema'''<br />
** 23-924 4-port powered USB 2.0 Hub (2.0A) Able to power Raspberry Pi via USB port<br />
*'''CyberPower'''<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817804002] CP-H720P 7-port powered hub with 3.6A adapter. Internally, a NEC Corp 0409:0050 device. Works perfectly with Model B, regardless of whether the RPi is being powered by the hub or externally. '''WARNING''': This device seems to have been replaced with one based on dual 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB internally<br />
*'''Dell'''<br />
** Dell 2001FP monitor has 4 USB ports and acts as a powered hub.<br />
** Dell SP2309W monitor has 4 USB ports and acts as a powered hub.<br />
** Dell 2407FWP monitor has 4 USB ports and acts as a powered hub. Additionally, the 6-in-1 Card Reader part of the monitor works as well, though it will not read SDXC Cards.<br />
** Dell U3011 monitor has 4 USB ports and acts as a powered hub. Additionally, the Card Reader part of the monitor works as well, and is compatible with 128GB SDXC Lexar Brand Cards <br />
*'''DELTACO'''<br />
** [https://www.deltaco.se/products/items/itemid/(UH-715)/index.aspx UH-715 Rev 2] 7-port powered hub with 2A adapter.<br />
*'''DYNEX'''<br />
** 7port hob idVendor=0409, idProduct=0050 works<br />
*'''D-Link'''<br />
** [http://www.amazon.com/D-Link-DUB-H7-High-Speed-7-Port/dp/B00008VFAF] 7-Port USB Hub DUB-H7 (See note below - doesn't work for all, apparently). Working model marked BUBH7A....A5. Worked with Debian on production B model, for keyboard, mouse, and thumb drives, also worked with ArchLinux, didn't work with Bodhi Linux immediately thereafter. Recent model did not work with default raspbian firmware (3.1.9+ #272); updated firmware with rpi-update (to 3.2.27+ #66), now seems to work perfectly.<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817111131] 4-Port USB Hub DUB-H4 Worked on Debian with keyboard, mouse, and thumb drive. Also tested with Raspbmc and external HD (powered through USB). While the hub has a charging port, which should be able to provide power enough to the RasPi (1.2 A), connecting the RasPi here doesn't work, as it seems the power is cut during boot (At least with hub hardware rev. C1). While it does boot from any of the other ports, it shouldn't be used it doesn't provide enough power (Standard 500 mA per port. Measuring at P1-P2 on the RasPi: ~4.45 V).<br />
*'''Digicom'''<br />
** [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MiniHubUsb204P#] MiniHUB 4-Port USB 2.0 with PSU 5V - 2A .<br />
*'''Digitus'''<br />
** 7-port USB2.0 Powered Hub. Model DA-70226.<br />
*'''Eminent'''<br />
** [http://www.eminent-online.com/en/product/22/em1102-4-port-usb-hub---black.html] EM1102 4 Port USB 2.0 Hub with 1A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
** [http://www.eminent-online.com/en/product/27/7-port-usb-2-0-hub.html] EM1107 7 Port USB 2.0 Hub with 2A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
* '''GearHead'''<br />
** [http://www.amazon.com/gp/product/B004OBZ088/] GearHead 4 Port Hub with Energy Saving Power Switch (5V, 1A)<br />
*'''Gembird'''<br />
** Gembird UHS 242 4-port USB 2.0 Hub 1.8 Amps<br />
* '''Genesys Logic (sold at Fry's)'''<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0608) (Other brands include Gigaware and Belkin, same ID shows up in lsusb)<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0606) (Other brands include i-Rocks, same ID shows up in lsusb)<br />
* '''Hama'''<br />
** Hama 4-way USB 2.0 Hub<br />
*'''HP'''<br />
** HP ZR2240w 21.5" Monitor with built in 2-Port USB Hub (B)<br />
*'''Laser'''<br />
** "7 port USB hub with AC adapter Version 2.0". 5V 1A (found at Harvey Norman Australia for $24.95 and Australia Post Shops for $9.95). You can power the PI by connecting both the main USB connector to the PI USB port, '''and''' from a spare USB port back to the power micro USB socket. If you don't do both, boot-loops are likely to occur.<br />
*'''Logik'''<br />
** [http://www.currys.co.uk/gbuk/logik-lp4hub10-4-port-powered-usb-hub-04979038-pdt.html] LP4HUB10 4-Port USB Hub. '''Throws errors when used with Fedora remix 14'''<br />
** Logik L4THUB10 4 Port powered hub works fine under raspbian/wheezy/model B. Captive usb cable, 2A power supply, convenient single top mounted usb socket. Unlike my last hub, will power wifi!<br />
*'''LogiLink'''<br />
** UA0085 USB 2.0 Hub, 4-Port with PSU 5V, 2A<br />
** UA0091 USB 3.0 Hub, 4-Port with PSU 5V, 4A. Connected with USB2.0 cable. 1A per port, able to support USB HDD drives and other power hungry devices. Tested with kernel 3.1.9-cutdown, Wheezy. <br />
** UA0096 USB 2.0 Hub, 10-Port with PSU 5V, 3.5A (Not suitable for powering RPi because it doesn't work unless there is working USB input present even with PSU plugged in.)<br />
** UA0160 USB 2.0 Hub, 4-Port with PSU 5V, 2A. Able to power the RPi, keyboard, mouse and LogiLink UA0144 USB ethernet adapter. (More testing to come.)<br />
* '''Macally'''<br />
** [http://www.macally.com/EN/?page_id=2316] Hi-Speed 7-Port USB 2.0 Powered Micro HUB, AC Powered. Includes a 2000mA wall-wart (US style)<br />
* '''Manhattan'''<br />
** [http://manhattan-products.com/en-US/products/6500-hi-speed-usb-2-0-micro-hub] (#160612) Hi-Speed USB 2.0 Micro HUB, AC Powered (identifies as ID 05e3:0608 Genesys Logic) Includes a 1000mA wall-wart (US style)<br />
*'''Newlink'''<br />
** NLUSB2-224P 4 port USB 2.0 Mini hub with PSU 5V 1A<br />
** NLUSB2-222P 4 port USB 2.0 Hub with 5V 2A PSU (Available From [https://www.modmypi.com/shop/raspberry-pi-accessories/New-Link-4-Port-USB-Hub-(USB-2.0-with-Mains-Adaptor) | ModMyPi])<br />
*'''Nilox'''<br />
** Nilox USB 2.0 4port HUB model HUB4USB2AC with PSU 5V 1.0A <br />
* '''Plugable'''<br />
** [http://plugable.com/products/USB2-HUB4BC/] USB2-HUB4BC 4 Port USB 2.0 Hub with BC 1.1 Fast Charging. 5V 2.5A power supply. Powering Pi via microUSB from a hub port. USB Audio peripheral tested and working.<br />
* '''Pluscom'''<br />
** Pluscom 7 Port USB 2.0 Hub Model U7PH-3A with 3Amp PSU. USB ID 1a40:0101. Powering Pi via microUSB from a hub port. Internally two 4 Port switches linked. Leaks power back up USB data cable to Pi but not really a problem when powering Pi at the same time.<br />
*'''Staples (Business Depot) (Bureau EN GROS)'''<br />
** Staples 4-port hub Item 607477-CA<br />
*'''StarTech.com'''<br />
** StarTech.com 7-port Compact USB 2.0 Hub (ST7202USB). Comes with 5v 2A supply. Shows in lsusb as two Genesys Logic, Inc. USB-2.0 4-Port HUBs (05e3:0608). Back powers Pi (Just, Voltage across TP1 & TP2 is a little low when powered from this hub).<br />
*'''SumVision'''<br />
** Sumvision Slim 4 Port High Speed USB 2.0 HUB with PSU 5V 1.0A (from [http://www.7dayshop.com/catalog/account_history_info.php?page=1&order_id=5130107 | 7dayshop ])<br />
*'''Sitecom'''<br />
** CN-032 4 Port USB 2.0 Pocket Hub. Works for powering the Pi, an USB WLAN Adapter, wireless Kbd+Mouse. Using an 2500 mA Voltcraft <br />
** CN-060 4 Port USB 2.0 Hub powered with AC Adapter (1A). Powering Pi via microUSB from a hub port.<br />
*'''Sweex'''<br />
** US014 4 Port USB 2.0 Hub<br />
*'''Targus'''<br />
** ACH81xx 7-port powered hub. 5V 3A power supply, with 2 high power ports. (possible conflicting behaviour with USB keyboard / Wifi Dongles)<br />
** ACH63EU 4-port. Using a 5V 2A power supply, which isn't supplied with the hub, it is able to power the PI as well.<br />
*'''The Pi Hut'''<br />
** 7 Port USB Hub (from [http://thepihut.com/products/7-port-usb-hub-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
*'''Trendnet'''<br />
** [http://www.trendnet.com/products/proddetail.asp?prod=130_TU2-700&cat=49] TU2-700 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2A)<br />
*'''Tripp-Lite'''<br />
** [http://www.tripplite.com/en/products/model.cfm?txtModelID=3167] U222-007-R 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2.5A) Powering RPi from Hub works<br />
*'''Ultron'''<br />
** [http://www.ultron.de/v1/produktansicht.php?artnr=67072&kid=bfa8340c4e245...&l=en&WGType=Neue+USB-HUBS] UHN-710 7-port powered hub with PSU 5V, 3A. USB ID 1a40:0201.<br />
*'''VANTEC'''<br />
** 4 Port USB 2.0 Powered Hub Model: UGT-MH304. 5V 2A AC/DC adapter. Go 2.0 Mini hub.<br />
*'''Z-TEK'''<br />
** Z-TEK 7-port powered hub with PSU 5V, 4A. USB ID 1a40:0201.<br />
*"Unknown"<br />
** 10(7-4) port hub idVendor=1a40, idProduct=0201 / idVendor=1a40, idProduct=0101 works<br />
<br />
===Problem USB Hubs===<br />
<br />
Please check known workarounds [http://elinux.org/Rpi_USB_check-list here] before adding to the list<br />
<br />
*'''Addon'''<br />
** 7-Port Powered Hub - labelled ADDUH070P - Gives constant Eth0 errors on boot.<br />
*'''Belkin'''<br />
** 7-Port Powered Mobile Hub - device labelled F4U018, packaging labelled F5U701. lsusb reveals it to be two Genesys Logic 4-port hubs based on the GL850G chipset (vendor: 0x05e3 product: 0x0608) ganged together. Yields a lot of "handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" errors and device resets in /var/log/messages. Low speed devices such as keyboards work OK, wifi/mass storage is unreliable or broken. -- No error messages with the latest kernel, but still unstable with mass storage devices. Also, leaks current back to the Pi (can be fixed by overtaping GND and +5V pinouts)<br />
** F4U022 7-Port powered USB hub (powered 5v, 2.6A), same as F4U018<br />
** 7-Port Powered Hub - device labled F5U237 Rev.3 - ID 050d:0237 Wired ethernet fails to connect; gives "DWC OTG HCD URB enqueue failed adding QTD. Error status -4008" Result is same as DUB-H7 below.<br />
** F5U404 Hi-Speed USB 2.0 4-Port Mobile Hub. Faulty/bad design; Leaks current back up the cable to the Raspberry Pi.<br />
** F5U307 Hi-Speed USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time) It work's sometimes. (Works always without powering the RPi, haven't tried that)<br />
<br />
*'''Dell'''<br />
** Dell U2410 Monitor Built-in 4 Port Hub - Shows up as a pair with 0424:2514 and 0424:2640. Standard Microsystems Corp. USB 2.0 Hub. When connecting some devices it kills the Ethernet with "smsc95xx 1-1.1:1.0: eth0: Failed to read register index 0x0000011X" errors. It did work for a keyboard and webcam. Bluetooth that works connected directly to the Pi triggers the error.<br />
<br />
*'''DELTACO'''<br />
** 7-Port USB Hub UH-713 Rev 3. This one consists also of two 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUBs connected together. The power supply is rated at 5 V 2 A. It kills ethernet when X11 is started.<br />
<br />
*'''Dynex'''<br />
** 7-Port USB Hub - Does not work in Debian 19-04 image.<br />
** DX-HB7PT 7-Port USB Hub - As per the Gear Head below, it's 2 daisy-chained Genesys Logic 05e3:0608 devices. Appears to result in significant slow downs when the USB is under load, such as running the root filesystem from a USB drive.<br />
<br />
*'''Dynamode'''<br />
** 7-Port USB 2.0 Hub (Silver and black). Feeds power back up the interconnect to the Pi causing the power LED to light on the Pi if the hub is powered on but the Pi is not. The Pi also fails to boot when powered off this hub, with or without the interconnect plugged in. Stops the network from working when connected to the Pi after booting the Pi - cannot ssh to the Pi. Best avoided. :-( Shows up in ''lsusb'' as a pair of ''ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB'' which is interesting. - Confirmed. This hub also appears unable to power an external USB drive using a y-cable as it gives the error -71 message in dmesg (when providing external power to the RPi)<br />
** 4-Port High-Speed USB 2.0 Hub (USB-H40-A2.0), came with with a 1A power supply. Leaks power to the Pi through the uplink. Doesn't work with Pi, unless the Pi is powered by a second power source. This hub is completely generic and I've seen it being sold under different brand names as well. Therefore, a picture is [http://i.imgur.com/BPZ3j.jpg included] for easy identification. <br />
<br />
*'''D-Link'''<br />
** 7-Port USB Hub DUB-H7 (Crashes USB stack, including Ethernet, when plugging / using some peripherals). (See note above, it works with some distros and/or with latest firmware)<br />
<br />
*'''E-Solution'''<br />
** 4-Port 2A Supply (Does not detect at all during boot or after boot- no messages) [IC = Alcor Micro Corp (AU6254)]<br />
<br />
*'''Fosmon'''<br />
** 7-Port USB 2.0 Hub w/ 1A Power Supply (Causes interference with other USB devices and sends enough power to light up the pi with it's Micro USB cable unplugged).<br />
<br />
*'''Gear Head'''<br />
** UH7250MAC 7-port powered hub. Internally, two daisy-chained Genesys Logic 05e3:0608 devices. Causes Ethernet instability when used under very specific circumstances, in X11.<br />
** <strike>UH5200T 4-port powered hub. As of 2012-08-16 Wheezy, if any USB 1.x device (a keyboard, for example) is plugged into this hub, Ethernet stops, and USB interrupts for other devices get dropped (keys repeating forever), etc. Occurs even if power is not attached (not a power leakage problem).</strike> Appears working after a bootloader and/or firmware update on 9/12. Also, turned out to be somewhat more specific to the combination of two particular low-speed devices.<br />
<br />
*'''Hama'''<br />
** 4-Port USB 2.0 "bus hub", model 78496 (?). Only works for low power devices (card readers?), but does not work for power hungry devices (HDD,WLAN). Doesnt boot when hub connected to RPi. The funniest thing is that RPi powers on when I plug in this hub to normal size USB port (not that small dedicated port). idVendor=05e3, idProduct=0608<br />
<br />
*'''Kensington'''<br />
** 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning keyboard, kills mouse when GUI started).<br />
<br />
*'''Inland'''<br />
** 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't, cheap unshielded untwisted wire design)<br />
<br />
*'''Logik'''<br />
** LP7HUB11 7-Port USB Hub. (Ethernet failed, slow response, in LXDE. Happened whether or not the hub's independent power supply was connected to the hub.)<br />
<br />
*'''Soniq'''<br />
** 4-Port 5V supply. Model number CUH100. (B). Appears to draw power away from the Raspberry Pi, even when the Pi has an isolated power line. Netgear WNA1100 WiFi Adapter (which is known to work in other setups is recognized, but unresponsive.<br />
<br />
*'''Targus'''<br />
** ACH115EU 7-port powered hub. 5V 3A power supply. Arduino communicates with RPi when connected directly to Pi's USB port, but it hangs soon if connected via ACH115. Also sometimes smsc95xx eth0 Failed to read register index 0x00000114 etc. errors in syslog when used.<br />
<br />
*'''TCM'''<br />
** Model 234298 s/n T634007737 powered hub. 4 ports plus card reader. 1A power supply. Model B, Wheezy raspian works ok with keyboard/mouse but problems with WiFi no connects. (insufficient power?)<br />
<br />
*'''Trust'''<br />
** 10-port USB 2.0 Hub (powered). Prevents ethernet from being recognised.<br />
** SliZe 7 port USB 2.0 Hub (powered) - Item number 17080 (Barcode 8 713439 170801). Prevents ethernet from being recognised. Keyboard sends multiple characters. <br />
<br />
*'''Unbranded / Multiple Brands'''<br />
** 7-port silver/black hub. Also sold elsewhere under brands such as 'EX-Pro', 'Trixes' and 'Xentra' -- This is ''probably'' due to an inadequate power supply. -- I replaced the terrible power supply with a very good one, kept getting "DEBUG: handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" in dmesg, with no devices plugged in to the hub (with or without the power supply in)<br />
** Generic 7-port black hub with Genesys Logic GL850A chipset<br />
** Cerulian 10 Port USB 2.0 Top Loading Hub with 2A supply (kills mouse and network port)<ref>http://www.raspberrypi.org/forum/absolute-beginners/cheap-powered-usb-hub-uk/#p76452</ref><br />
** [http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10307&cs_id=1030701&p_id=226 USB 2.0 4 PORT INT/EXT DUAL HUB BAY] -- Genesys Chipset -- idVendor=05e3, idProduct=0607 -- low speed devices worked, but strange USB failures when X session started. High speed devices such as hard drives had failures.<br />
<br />
== USB Remotes ==<br />
* ATI Remote Wonder (X10 Wireless Technology, Inc. X10 Receiver) — ID 0bc7:0004 — appears as a joystick-like 2 button mouse and a 0-9 keypad without drivers on console and X.<br />
<br />
* [http://www.amazon.com/gp/product/B005DKZTMG/ref=oh_details_o02_s00_i00 Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad (920-003070)] - keyboard and touchpad work. Have not verified multi-touch features.<br />
<br />
* [http://www.ipazzport.com/02A.html iPazzport] mini 2.4 GHz wireless keyboard and touchpad. <br />
<br />
* [http://www.ortek.com/html/pdt_view.asp?area=46&cat=152&sn=76 PKB 1800] Wireless Smart Pad ad Mini Keyboard. Pad works as mouse but not multi touch features. Keyboard works.<br />
<br />
* [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] '''Rii''' Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]. Working perfectly, just plug & play.<br />
<br />
* [https://www.google.com/search?q=tranksung+TS-Y150 Tranksung TS-Y150] USB RF Keyboard and air mouse (B)<br />
<br />
* [http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6753651&CatId=3680# Exo Ultra U12-41310 Mini Keyboard] Bluetooth Adapter, Touchpad, Laser Pointer, Presentation & Multimedia Controls work perfectly but need a little love and config for make it work.[https://github.com/thunderbirdtr/rs-pi-exo-keyboard Exo Installer script]<br />
<br />
== USB Keyboards ==<br />
USB keyboards that present themselves as a standard HID (Human Interface Device) device should work. '''Please be aware that some of these keyboards were probably used with a powered hub'''<br />
=== Working USB Keyboards ===<br />
The following is a list of specific keyboards known to work and which appear to work fault-free.<br />
<br />
* '''A4 Tech'''<br />
** Model KL-5 USB Keyboard, 20mA.<br />
<br />
* '''ABS'''<br />
** M1 Heavy Duty Professional Gaming Mechanical Keyboard (B)<br />
<br />
* '''Action Star'''<br />
** ACK-5010U Mini Keyboard And Mouse<br />
<br />
* '''Accuratus'''<br />
** KYB-Toughball-HI<br />
<br />
* '''Acer'''<br />
** KG-0917 Wireless Keyboard And Mouse Bundle (B)<br />
** KU-0906 Compact Keyboard (B) (Also known as Genius LuxeMate i200 Keyboard)<br />
** SK-9625 Multimedia Keyboard (B) (multimedia functions not tested)<br />
<br />
* '''Adesso'''<br />
** [http://ergoprise.com/product_images/j/699/ADP-PU21_big__14173_zoom.jpg PS/2 to USB Adapter] ADP-PU21, 100mA (tested only with keyboards) Any PS/2 keyboard will work only if it will work with a reduced operating voltage.<br />
** Model AKB-410UB. Keyboard with Touchpad.<br />
<br />
* '''Apple''' (Apple keyboards that have USB ports require an external powered hub to work, and do not work on the PI directly!)<br />
** [http://upload.wikimedia.org/wikipedia/commons/thumb/e/ea/Apple_iMac_Keyboard_A1243.png/800px-Apple_iMac_Keyboard_A1243.png Apple Keyboard with Numeric Keypad (aluminium/wired) A1243]<br />
** [http://upload.wikimedia.org/wikipedia/commons/8/81/Apple_Keyboard_A1242.jpg Apple Keyboard (aluminium/wired) A1242]<br />
<br />
* '''Asda'''<br />
** Basic Wired Keyboard HK2026 (B)<br />
** Basic Wired Keyboard HK3014<br />
*** (Please note when I put this keyboard through Newlink USB hub, it didn't work as expected)<br />
** Premium Wireless Keyboard (white keys, silver back) HK8028<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''Asus'''<br />
** KS-631U (comes with Asus Vento KM-63 keyboard/mouse set, not using powered hub) (B)<br />
<br />
* '''BTC - Behavior Tech Computer Corp.'''<br />
** Wired Portable Keyboard Model 6100 US (86+9 keys)<br />
*** Works with or without a powered hub<br />
** Wireless Multimedia Keyboard with build in pointer/mouse Model 9029URF III (86+17 keys) (B)<br />
** [http://www.btc.com.tw/english/2-7-07keyboard.htm Wired Multimedia keyboard 6311U/6310U] - rated at 5V/100mA, works directly<br />
<br />
* '''Bush'''<br />
** Wired Slimline Keyboard KU-0833<br />
*** This does not require a USB hub in order to work with the Raspberry Pi<br />
*** In the UK, it is available from Argos for £9.99<br />
<br />
* '''Cerulian''' <br />
** Mini wireless keyboard and mouse deskset (B)<br />
<br />
* '''CD Training''' <br />
** [http://www.cd-training.fr/?&feed=product&product_id=308 Wireless Combo Keyboard and Mouse (SolClavGlos)]<br />
<br />
* '''Cherry'''<br />
** CyMotion Master Linux (B)<br />
** RS 6000 USB ON<br />
** G84-4100PTMUS (B) (Compact keyboard. Rated 100mA. Works directly in Pi)<br />
<br />
* '''Compaq'''<br />
** Compaq Internet Keyboard KU-9978 (049f:000e). Rated 5v 100mA. Works directly connected to Pi<br />
<br />
* '''Das Keyboard'''<br />
** Model S Professional Keyboard (Built in USB hub not tested) (B)<br />
** Model S Ultimate Keyboard (Built in USB hub working) (B)<br />
<br />
* '''Dell'''<br />
** SK-8115 (B) (Rated 100mA. Works directly in pi)<br />
** L100 (B)<br />
** RT7D50 (75mA) (run "sudo dpkg-reconfigure keyboard-configuration")<br />
** KB1421 (100mA)<br />
** KB2521 (100mA)<br />
** 1HF2Y (Works directly in pi)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Delux'''<br />
** K8050<br />
<br />
* '''Digicom'''<br />
** WKEYPE01 Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
* '''Dynex'''<br />
** DX_-WKBD (60ma) (B)<br />
** DX_-WKBDSL (Hot keys not yet tested with Debian) (tested through non-powered 3 dongle usb hub) (B)<br />
<br />
* '''EAPPLY'''<br />
** EBO-013 Wireless 2.4GHz compact keyboard with touchpad. Rated <40mA works directly from Pi. eBay ref 260962010276 from Shenzen, China.<br />
<br />
* '''Emprex'''<br />
** Wireless Media Control Keyboard With Trackball 9039ARF III (Media functions untested)<br />
<br />
* '''Fujitsu Siemens''' <br />
** KB SC USB UK (!)<br />
** KB910 USB, with led light on the highest level (B)<br />
** KB400 USB US<br />
<br />
* '''GE''' <br />
** 98139 Rev.K1 (Power Keyboard) (lsusb shows it as "0b38:0010 Gear Head 107-Key Keyboard") - works without a hub (i.e. directly connected) (B)<br />
<br />
* '''Gear Head''' <br />
** KB3700TP (USB Mini Smart Touch Touchpad Keyboard) (B)<br />
** KB3800TP (Wireless Touch Mini Touchpad Keyboard with Smart Touch) (B)<br />
*** Works when plugged directly into Raspberry Pi, did not work with powered hub (could be a hub issue)<br />
** KB3800TPW (Windows Smart Touch Wireless Keyboard with Touchpad) (B)RASPBMC supported<br />
** KB4950TPW (Wireless Touch II Touchpad Keyboard) (B)<br />
** KB1500U (USB Mini Keyboard) (B)<br />
** KB5150 (2.4Ghz wireless keyboard/mouse Combo) (B)<br />
*** Works well with a powered hub<br />
<br />
* '''Genius'''<br />
** Ergomedia 700 (GK-04008/C) used without Hub<br />
** KB-06XE (K639) (B)<br />
** Slimstar 8000 wireless keyboard<br />
<br />
* '''HP'''<br />
** KG-1061<br />
** KG-0851 Wireless Keyboard and Mouse<br />
** KU-0316 (B)<br />
** LV290AA#ABA Wireless Keyboard and Mouse<br />
** PR1101U (available from Sainsbury's in the UK, £8, July 2012)<br />
** SK-2880<br />
<br />
* '''Hyundai'''<br />
** HY-K201<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Imation''' <br />
** KBD-702 Multi-media Wired Keyboard<br />
*** (works after the firmware update via [https://github.com/Hexxeh/rpi-update rpi-update] as of 06/27/2012)<br />
<br />
* '''IOGEAR'''<br />
** IOGEAR GKM561R Wireless HTPC Multimedia Keyboard with Trackball<br />
** IOGEAR GKM681R 2.4GHz Wireless Compact Keyboard with Optical Trackball and Scroll Wheel<br />
<br />
* '''iPazzPort'''<br />
<br />
* '''i.t.works'''<br />
** KC04 (direct and by usb hub)<br />
** KC Silicone (only tested directly)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''KeySonic'''<br />
** ACK-540RF (Wireless USB keyboard with built-in trackpad); works fine on Debian Squeeze plugged directly into Pi. Also works with Raspbmc with powered hub.<br />
** ACK-540RF+ (UK) WiFi keyboard inc touchpad with USB wifi dongle works fb with on model B/raspian/wheezy via powered hub<br />
** ACK-3700C<br />
** ACK-340U+(DE)<br />
** ACK-3400U (UK) mini keyboard<br />
<br />
* '''Labtec'''<br />
** [http://www.labtec.com/index.cfm/gear/details/EUR/EN,crid=28,contentid=692| Ultra-flat Keyboard]<br />
<br />
* '''Laptopmate'''<br />
** AK-98UNTN7-UBRII Laptopmate RII Touch N7 Mini Wireless Keyboard with touchpad<br />
<br />
* '''LC-Power<br />
** K1000BMW (lsusb: ID 1241:f767 Belkin; dmesg: HOLTEK Wireless 2.4GHz Trackball Keyboard) tested with Debian 6.0.4<br />
<br />
* '''Lenovo'''<br />
** SK-8825 UK (B)<br />
** Lenovo Enhanced Multimedia Remote with backlit keyboard N5902 (US)<br />
** Lenovo Mini Wireless Keyboard N5901 (US)<br />
<br />
* '''Lindy'''<br />
** 21840 (Wireless RF 2.4GHz Micro Keyboard with built-in optical touchpad/trackpad, USB); works fine on model B/raspian/wheezy - the supplied Lindy USB nano dongle transceiver plugged directly into Pi USB port.<br />
<br />
* '''Logik'''<br />
** Ultra slim keyboard LKBWSL11 (B) >> '''This is also listed under Problem USB Keyboards?'''<br />
<br />
* '''Logitech'''<br />
** Comfort Wave 450, labeled 100mA (M/N Y-U0001, P/N 820-001725, PID SC951C40001)<br />
** diNovo Mini wireless keyboard with media controls and clickpad 920-000586 (B)<br />
** diNovo Edge Keyboard, Windows edition, built-in TouchDisc track-pad, bluetooth w/ USB mini-receiver 967685-0403 (B)<br />
** Wii wireless keyboard KG-0802 (!)<br />
** C-BG17-Dual Wireless keyboard and mouse with wired USB receiver (B)<br />
** Deluxe 250 Keyboard<br />
** Internet 350 (M/N 967740-0403)<br />
** Internet Navigator Keyboard<br />
** MK120 wired keyboard and mouse<br />
** MK220 wireless keyboard and mouse<br />
** MK250 wireless keyboard and mouse (no hub needed)<br />
** MK260 wireless keyboard and mouse<br />
** MK300 wireless keyboard and mouse<br />
** MK320 wireless keyboard and mouse [http://www.amazon.co.uk/Logitech-920-002885-MK320-Wireless-Desktop/dp/B003STDQYW/ref=sr_1_3?ie=UTF8&qid=1339166178&sr=8-3]<br />
** MK350 wireless keyboard (using Unifying receiver)<br />
** MK520 wireless keyboard and mouse<br />
** MK550 wireless keyboard and mouse (B)<br />
** MX5000 Bluetooth keyboard and mouse (B) The Logitech Bluetooth dongle also does proprietary wireless so it works without Bluetooth drivers.<br />
** EX100 Cordless Desktop, Wireless Keyboard and Mouse (B)<br />
** EX110 Cordless Desktop, wireless keyboard and mouse (B)<br />
** K120 Keyboard (B)<br />
** K200 Keyboard (B)<br />
** K230 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K340 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K350 Wireless Keyboard (B)<br />
** K400 wireless keyboard with touchpad - also listed under "problematic". works for weeks with openelec and raspbian without any problems.<br />
** K520 Keyboard (B)<br />
** K700 Wireless Keyboard with Touchpad and unifying receiver<br />
** K750 Wireless Solar Keyboard (B) (Mac version works too. (B) )<br />
** LX 710 - works fine with receiver plugged directly into the RPi (accompanying mouse works fine too).<br />
** S510 wireless keyboard and mouse (B)<br />
** Ultra-Flat Keyboard (M/N Y-BP62A P/N 820-000245 PID SY126UK)labelled 100 mA. OK direct into Model B RPi.<br />
** G19 Gaming Keyboard, works fine with no external power. Illumination with external power. Powered hum in back of keyboard works too.<br />
** G15 Gaming keyboard, as long as you press the backlight button twice to turn off the backlight (it says below it dosen't work with backlight on.<br />
** V470 Bluetooth Laser Mouse<br />
<br />
''Keyboards and mice also together with Unifying receiver'' <br />
<br />
* '''Microsoft''' <br />
**Microsoft Comfort Curve Keyboard 2000<br />
**Microsoft Comfort Curve Keyboard 3000 for Business<br />
**Microsoft Digital Media Pro Keyboard Model : 1031 (Debian 13-Apr-2012)<br />
**Microsoft Natural Ergonomic Keyboard 4000 (B) (Debian "Wheezy" beta 18-June-2012)<br />
**Microsoft Wired Keyboard 600 Model 1366 (Debian 28-May-2012 on Production Model B)<br />
**Microsoft Wireless Desktop 700 Keyboard v2.0 (Raspbian Pisces image 08-June-2012 on Production Model B)<br />
**Microsoft Wireless Photo Keyboard (Model 1027) Unifying receiver, no hub<br />
**Microsoft Wireless Natural Multimedia Keyboard (Raspbian Pisces 08-July-2012) (B)<br />
**Microsoft Windows 2000 Keyboard (KB-USBK110610)<br />
**[https://www.microsoft.com/hardware/en-us/p/wired-keyboard-600/ANB-00001 Microsoft Wired Keyboard 600]. The keyboard is rated at 5v/100mA (Wheezy 5-Sept-2012)<br />
<br />
* '''Mikomi''' <br />
** Wireless Deskset KM80545 Keyboard and mouse (Works but range is terrible less than a metre) (B)<br />
<br />
* '''Monoprice'''<br />
** [http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10404&cs_id=1040401&p_id=6854&seq=1&format=2|Monoprice PS/2 To USB Adapter] Directly and through an unpowered hub with a USB mouse plugged in.<br />
<br />
* '''Motorola'''<br />
<br />
** Bluetooth wireless ultra slim keyboard and mouse combo (sold as for the "Atrix" phone) work in combination with the Technika Bluetooth adaptor listed below<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/desktopkits/nov-wcombo.html|Novatech Wireless Combo - Keyboard & Mouse, Nano adapter] (B)<br />
<br />
* '''ONN'''<br />
**ONN Keyboard Stock No: ONA11HO089 (from Walmart). Seems to work fine, even without a hub.<br />
**ONN Keyboard Stock No: ONA11HO087 (from Walmart). Combination keyboard and mouse package with nano receiver. Be sure to configure keyboard layout.<br />
<br />
* '''Ortek'''<br />
** Ortek Technology, Inc. [http://www.ortek.com/html/pdt_view.asp?area=46&cat=150&sn=79 WKB-2000S] Wireless Keyboard with Touchpad works fine on Raspbian Wheezy and Raspbmc. Wireless USB receiver (device ID 05a4:2000) is recognised automatically. Connected directly to Pi USB port, no powered hub used.<br />
<br />
* '''Perixx''' <br />
**Periboard 716 Wireless Ultra-Slim Keyboard with Touchpad (Debian 07-Jun-2012 on Production Model B)<br />
** PERIBOARD-502 wired keyboard inc built in touchpad (model B/raspian wheezy)<br />
** Periduo-707 Plus (Wireless Keyboard and Mouse) works fine ''most'' of the time. Does suffer from dropouts and glitches though. Usual "drawing too much power from USB" problems show up as well - dropped key presses or constant autorepeats. These can be cured by pulling out and reinserting the dongle in the USB socket. The keyboard sometimes hangs after power on when used with my laptop - it seems to need 30 seconds of non-use before it works fine. Again, remove and insert the dongle cures it. Works fine vi my Benq monitor's USB Hub.<br />
<br />
* '''Philips''' <br />
**Wired Multimedia Keyboard SPK3700BC/97 (Debian 19-Apr-2012 on Production Model B)<br />
<br />
* '''Prodige'''<br />
**Nanox Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01]<br />
<br />
* '''Rapoo'''<br />
**Rapoo E9080 Wireless Ultra-Slim Keyboard with Touchpad<br />
**Rapoo Wireless Multi-media Touchpad Keyboard E2700 [http://www.rapoo.com/showdetails.aspx?P_No=E2700]<br />
**Rapoo Ultra-Slim Wireless Multimedia Keyboard and Mouse E9060 (works proper on powered USB Hub)<br />
<br />
*'''Riitek'''<br />
**RT-MWK03 mini wireless keyboard & trackpad<br />
**RT-MWK02+ mini bluetooth keyboard & trackpad. Followed instructions from this page: [http://www.ctheroux.com/2012/08/a-step-by-step-guide-to-setup-a-bluetooth-keyboard-and-mouse-on-the-raspberry-pi/] and it worked, connection persists across reboots, no problem with either builtin USB or powered USB hub.<br />
**RT-MWK01 mini wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
*'''Rosewill'''<br />
** RK-200 Standard Keyboard<br />
<br />
*'''Saitek'''<br />
** Eclipse II Backlit Keyboard PK02AU (B)<br />
** Eclipse Backlit Keyboard PZ30AV (B) - works fine when connected directly to Pi rev.1 and 2 USB port. No powered hub used.<br />
** Expression Keyboard (US) <br />
** Cyborg V.5 (B)<br />
<br />
*'''SelecLine'''<br />
** WK11P & WM11P-SP-PP. Keyboard and mouse set. (B)<br />
<br />
*'''SIIG'''<br />
** SIIG Wireless Multi-Touchpad Mini Keyboard 02-1286A v1.0 (B)<br />
<br />
*'''Silvercrest'''<br />
** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B) <br />
<br />
*'''SolidTek'''<br />
** Solid Tek KB-P3100BU ASK-3100U. <br />
<br />
*'''Sony'''<br />
** Keyboard for PlayStation 2 (PS2) Linux. Works without powered hub with 5v1A supply, requires manual keyboard remapping with Debian Squeeze to USA 101-key layout.<br />
<br />
* '''SteelSeries'''<br />
** Merc keyboard (B)<br />
<br />
* '''Sun Microsystems'''<br />
** Model: Type 7, SUN PN: 320-1348-02 (Danish key layout)<br />
** Model: Type 6, SUN PN: 320-1279-01 (Danish key layout)<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/keyboards/KB060UK/ KB060UK] Wired Multimedia Keyboard<br />
<br />
* '''Technika'''<br />
** WKEY03 (B)<br />
** TKD-211<br />
<br />
* '''Tesco'''<br />
** Value Keyboard VK109 (B)<br />
** Multimedia K211 Wired Keyboard (B)<br />
<br />
*'''The Pi Hut'''<br />
** Super Slim Apple Style Keyboard (from [http://thepihut.com/products/usb-keyboard-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Apple Style Keyboard Set (Keyboard & Mouse) (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust 17916 Compact Wireless Entertainment Keyboard http://www.trust.com/products/product.aspx?artnr=17916 (B)<br />
** Trust ClassicLine Keyboard http://trust.com/17184 <br />
** Trust Camiva MultiMedia Keyboard http://trust.com/products/product.aspx?artnr=16087<br />
** Trust Convex Keyboard http://trust.com/products/product.aspx?artnr=17603 tested debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
<br />
* '''Unbranded'''<br />
** AK-601 Wireless Mini Keyboard and Trackball (with laser pointer) - sourced from eBay Chinese seller<br />
<br />
* '''Unicomp'''<br />
** USB Endurapro - keyboard and trackpoint work perfectly from powered hub<br />
<br />
* '''Q-Connect'''<br />
** AK-808 (B)<br />
<br />
* '''Xenta'''<br />
** 2.4GHz Wireless Multimedia Entertainment Keyboard with Touchpad (B)<br />
** Mini Multimedia Keyboard (Model no.: 808M) (B)<br />
<br />
===Problem USB Keyboards===<br />
<br />
Note that generally PS/2 keyboards with an USB adapter will not work directly on a PI port, due to the fact that PS/2 keyboards are designed for normal 5V +-5% range, while USB keyboards must be designed to work with 4.4 Volt, and generally USB devices on the PI may receive less than 4.75 Volt. PS/2 + USB adapter keyboards might work behind a powered hub, which does provide the full 5.0V. Some of these keyboards work when running the latest raspbian but not when using the overclocked xbmc version of raspbmc, probably due to the overclocking drawing more voltage away from the rest of the support system devices.<br />
<br />
* '''A4 Tech'''<br />
** Model GL-6 USB Keyboard, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''Accuratus'''<br />
** Accuratus KYBAC100-101USBBLK causes kernel panic (rated 100mA). Tested with 1000mA cheap unbranded and Nokia 1200mA power adaptors.<br />
* '''Apple'''<br />
** [http://www.powerbookmedic.com/xcart1/images/D/apple-keyboard.jpg Apple Keyboard (109 keys) A1048]. Draws too much power and does not seem to work properly when plugged into a powered hub. <br />
*'''Argos'''<br />
** Argos Value Wired Keyboard causes kernel panic<br />
* '''Choidy'''<br />
** Identifiers from usb-devices: Vendor=1a2c ProdID=0002 Rev=01.10 Product=USB Keykoard (yes, 'Keykoard') causes kernel panic<br />
* '''Cit''' <br />
** KB-1807UB Causes kernel panic (Rated <200ma)<br />
* '''Dell'''<br />
** SK-8135 (B) (Rated 1.5A. Takes too much power from pi even when not used as USB hub. Symptom = repeated keystrokes)<br />
** SK-8115 causes kernel panic (rated 100mA) Debian 6-19-04-2012 (B)<br />
** Y-U0003-DEL5 Sticky / Non-responsive keys<br />
* '''Gear Head'''<br />
** KB2300U - Causes kernel panic (B)<br />
* '''GMYLE'''<br />
** Wired USB Slim Chocolate Multimedia Media Typing Keyboard With 3 USB Port hub (B) - Kernel Panic on startup if plugged in. If plugged in at login prompt then freeze. [http://www.amazon.co.uk/gp/product/B0067EC3GW/]<br />
* '''Inland''' <br />
** Inland USB Keyboard Model #70010<br />
* '''Jeway'''<br />
** JK-8170 "The Hunter" - causes kernel oops (Debian6-19-04-2012) (B)<br />
* '''Labtec'''<br />
** ultra-flat wireless desktop USB - Keyboard has 'sticky' keys. Tested both debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
* '''Logik'''<br />
** Wired Multimedia Keyboard Model: LKBWMM11 - causes kernel panic (on Debian 190412 distro) (B)<br />
** Wired Ultra Slim Keyboard Model: LKBWSL11 - causes USB power issues. Not reliable. Causes other USB devices to fail (B) >> '''This is also listed under Working USB Keyboards??'''<br />
* '''Logitech'''<br />
** Logitech Illuminated Keyboard (unstable; not working with led light on; tested both US and NO layouts with both Apple iPad 2 and Asus TF-101 USB chargers)<br />
** G110 Gaming Keyboard - only works with illumination off, otherwise unresponsive. Once failed it needs reconnecting before another attempt. (B)<br />
** G15 Gaming Keyboard - LCD and key backlights flicker, 95% unresponsive to typing. I don't know of a way to turn the illumination off. (B)<br />
** K360 Wireless Keyboard - Occasional sticky keys. (B)<br />
** K400 wireless keyboard with touchpad (completely non-functional on debian6-19-04-2012)<br />
** G510 Gaming Keyboard - lagging or unresponsive keys.<br />
** MX5500 wireless keyboard and mouse with usb bluetooth reciever - Unstable, looses connection without prior notice<br />
** EX100 Cordless Desktop, wireless keyboard and mouse. Mouse and keyboard hangs every few minutes (with or without hub).<br />
* '''Microsoft''' <br />
** Wireless Desktop 800 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Entertainment Keyboard - No key input recognized (possibly connectivity issue as pairing devices does not seem to work)<br />
** Wireless Optical Desktop 1000 - Keyboard has 'sticky' keys (B)<br />
** Wireless Keyboard 2000 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Desktop 3000 - Keyboard has 'sticky' keys.<br />
** Arc wireless - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X4 - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X6 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Comfort Keyboard 5000 - Keyboard has 'sticky' keys. (B)<br />
** Razer Reclusa - Keyboard has 'sticky' keys. (B rev 2.0)<br />
* '''Novatech'''<br />
** NOV-KEY2 - Causes kernel panic (B)<ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
* '''PC World Essentials'''<br />
** PKBW11 Wired Keyboard - no power to keyboard, no error messages on both Arch 29-04-2012 and Debian6-19-04-2012, same Pi works with Asda keyboard. Me too, but caused a kernel panic -- tested on powered hub and direct.<br />
* '''Razer'''<br />
** Razer Tarantula gaming keyboard - sticky keys, could be power issue as is programmable with host powered USB hub and audio jacks.<br />
** Razer BlackWidow - Sticky keys, could be a power related issue due to illuminated logo (Blue LED).<br />
* '''SIIG'''<br />
** Wireless Ultra Slim Multimedia Mini Keyboard JK-WR0612-S1 - Unresponsive and sticky keys.<br />
* '''Texet'''<br />
** MB-768B standard keyboard (Rated 5V 1.5A(!), so probably too much power drain. Kernel panic, Debian6-19-04-2012)<br />
* '''Trust''' <br />
** TRUST GXT 18 Gaming Keyboard - No power to keyboard, could be a driver issue - no error messages.<br />
* '''Unbranded'''<br />
** Compuparts<br />
** model no. HK-6106 (B) <ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
** LK-890 (Multimedia keyboard & Optical Mouse) - kernel panic on Debian Squeeze, ArchLinux and Qtonpi.<br />
* '''Verbatim'''<br />
** [http://www.amazon.com/gp/product/B004LB5AKY/ref=oh_details_o00_s00_i02|Verbatim 97472 Mini Wireless Slim Keyboard and Mouse] - Keyboard has lagging, unresponsive and sticky keys issues. (Tested with and without powered USB hub.)<br />
* '''Wilkinsons / TEXET'''<br />
** Model MB-768B causes kernel panic on debian6-19-04-2012.<br />
* '''Xenta'''<br />
** HK-6106 - causes kernel panic (on Debian 190412 distro)(B)<br />
** Multimedia Wireless Keyboard and Mouse Set (Keyboard Model: HK3518B + Mouse Model HM3301) (B) - occasional sticky keys, and occasional complete lock-up<br />
<br />
== USB Mouse devices ==<br />
USB mouse devices that present themselves as a standard HID (Human Interface Device) device should work, however some hardware requires special drivers or additional software, usually only compatible with Windows operating systems. <br />
<br />
===Working USB Mouse Devices===<br />
The following is a list of specific mouse devices known to work and which appear to be fault-free.<br />
<br />
* '''A4Tech'''<br />
** OP-530NU Padless Wired Mouse<br />
<br />
* '''Asda'''<br />
** HM5058 (Smart Price) Wired Mouse<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''ASUS'''<br />
** MS-511U (comes with Asus Vento KM-63 keyboard/mouse combo) (B)<br />
** MG-0919 (wireless)<br />
<br />
* '''Belkin'''<br />
**F8E882-OPT (B)<br />
<br />
* '''Dell'''<br />
** M-UVDEL1 (B)<br />
** M056U0A (B)<br />
** DZL-MS111-L (B) (100mA)<br />
** MS-111P (100mA)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Dynex'''<br />
** DX-WMSE (100mA) (B)<br />
<br />
* '''Fellowes'''<br />
** 99928 USB Micro Track Ball (works without a hub, directly plugged in) (B)<br />
<br />
* '''Filand'''<br />
** OP-102i Mini Optical Mouse<br />
<br />
* '''Genius'''<br />
** GM-04003A (B)<br />
** Slimstar 8000 wireless mouse (Can be intermitent. Mouse pointer sometimes is irratic.)<br />
** Traveler 515 Laser<br />
<br />
* '''HP'''<br />
** MN-UAE96 (The basic stock HP wired mouse)(B)<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''Kensington'''<br />
** Kensington Expert Mouse Trackball K64325<br />
** Kensington Expert Mouse "Slimblade" K72327US<br />
<br />
* '''Labtec'''<br />
** Corded Laser Glow Mouse 1600, rated 5V 100mA (P/N 810-000819, M/N M-UAZ149, PID GT83401)<br />
<br />
* '''Lenovo'''<br />
** Wired Optical Mouse Model: MO28UOL<br />
<br />
* '''Logik'''<br />
** Wired Optical Glow Mouse Model: LGGMO10. (B)<br />
<br />
* '''Logitech'''<br />
** B105 Mouse for Laptops (OEM)<br />
** Cordless Pilot Optical Mouse M/N M-RR95 with Cordless Mouse Receiver M/N C-BA4-MSE<br />
** G5 Logitech Gaming Mouse (B)<br />
** G5v2 Logitech Gaming Mouse (B)<br />
** G500 Logitech Gaming Mouse (B)<br />
** G700 Logitech Wireless Gaming Mouse (B)<br />
** LX-700 Cordless Desktop Receiver (B)<br />
** LX 710 Wireless Mouse - works fine with receiver plugged directly into RPi (accompanying keyboard works fine too).<br />
** M90 optical mouse<br />
** M185 Wireless Mouse (B)<br />
** M210 (part of the MK260 set) (B)<br />
** M305 Wireless Mouse<br />
** M310 Cordless Mouse<br />
** M325 Wireless Mouse<br />
** M505 USB wireless laser, model no: 910-001324 (B)<br />
** M510 Wireless Mouse (B)<br />
** M705 Marathon Mouse (Unifying receiver, no powered hub) (B)<br />
** M-BD58 Wheel Mouse (B)<br />
** M-BJ58/M-BJ69 Optical Wheel Mouse (B)<br />
** M-BJ79 (B)<br />
** M-BT96a Optical Mouse<br />
** MX320/MX400 laser mouse (B)<br />
** MX518 Optical wheel mouse (B)<br />
** Optical USB Mouse (M/N 931643-0403)<br />
** Performance Mouse MX (B)<br />
** MX Revolution (B) (Debian "Wheezy" beta 18-June-2012)<br />
** VX Nano Cordless Laser Mouse for Notebooks<br />
** Wheel Mouse (M/N BJ58)<br />
<br />
* '''Medion'''<br />
** Mini mouse Model M101-CBJ P/N 40016632 S/N 7BFSA00003445 rated 5v 100ms Works fb on model B with raspian wheezy<br />
<br />
* '''Microsoft''' <br />
** Comfort Curve Mouse 3000 for Business<br />
** Comfort Mouse 6000 (works when directly connected to Pi (B). Does not work when connected through USB Hub (mouse pointer intermittent).<br />
** Compact optical mouse 500 V2.0 (B)<br />
** Wheel Optical Mouse (wheel and additional buttons not tested) (B)<br />
** Microsoft Intellimouse Optical Mouse<br />
** Microsoft Wireless Laser Mouse 8000<br />
** Microsoft Wireless Mobile Mouse 1000<br />
** Microsoft Wireless Mobile Mouse 3500<br />
** Microsoft Wireless Mobile Mouse 4000<br />
** Microsoft Wireless Mouse 700 v2.0<br />
** Microsoft Comfort Mouse 4500<br />
** Wireless IntelliMouse Explorer 2.0 (unifying receiver, no hub)<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-mouser.html|Novatech M1 USB Mouse - Wired](B)<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-dl10.html|Novatech DL10 Wireless Mouse] (B)<br />
<br />
* '''Razer'''<br />
** Boomslang Collectors Edition 2007 (B)<br />
<br />
* '''Rosewill'''<br />
** Rosewill RM-C2U<br />
<br />
* '''Saitek'''<br />
** Notebook Optical Mouse (PM46)<br />
<br />
* '''Samsung'''<br />
** Samsung model:AA-SM3PCPB usb Optical Mouse (draws 50mA) <br />
<br />
* '''Sun microsystems'''<br />
** Model: FID-638 , SunPN: 371-0788-01<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/optical-mice/MI015/ MI015]<br />
<br />
* '''Swiftpoint'''<br />
** [http://http://www.americas.futuremouse.com/] Swiftpoint Mini Wireless Optical Mouse. Does not require any special drivers. Haven't confirmed if charging the mouse requires a powered USB hub or not.<br />
<br />
* '''Targus'''<br />
** AMU2701EUK (B)<br />
<br />
* '''Technika'''<br />
** TKOPTM2 (B)<br />
**TKD-211<br />
<br />
* '''Tesco'''<br />
** Wired optical mouse M211 (B)<br />
<br />
*'''The Pi Hut'''<br />
** USB Mouse for Raspberry Pi (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Keyboard & Mouse Set (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust Nanou Wireless Micro Mouse http://trust.com/products/product.aspx?artnr=17087<br />
<br />
* '''Verbatiam'''<br />
**Mini Nano Optical Mouse 97470 (wireless on non-powered 3 usb dongle hub) (B)<br />
<br />
* '''Xenta'''<br />
** MOW0810 (B)<br />
** Wired Optical Mouse (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Generic'''<br />
** Generic 2.4GHz Wireless Mouse (ID 040b:2013 Weltrend Semiconductor) (B)<br />
<br />
===Problem USB Mouse Devices===<br />
The following is a list of specific mouse devices that have problems working with the Raspberry Pi<br />
* '''A4Tech'''<br />
** Model G7-630 Wireless Mouse, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''HP'''<br />
** HP Retractable Mobile Mouse (Optical) HP Product Number XP472AA - errors / boot loop RASPBMC (B)removed mouse, started with no further errors. <br />
<br />
* '''Logik'''<br />
** Logik IMF Blue Trace Wired USB mouse (Model LMWBLU11) - disconnects from the USB port every 20 seconds when using the Raspian distro. Always reconnects to the USB port successfully (B)<br />
<br />
* '''Logitech'''<br />
** Logitech G400 Gaming Mouse - 100% CPU load and laggy mouse cursor when the mouse is moved. MX518 works fine on the same setup, so I suspect it's a polling rate issue. [http://tech2.in.com/reviews/mice/logitech-g400-is-it-a-worthy-successor/231012 this] says the mouse is 1000Hz out of the box, whereas the 518 is only 125Hz. Solution found: add usbhid.mousepoll=8 to the kernel commandline.<br />
<br />
* '''Microsoft'''<br />
** Microsoft Touch Mouse - Does not see right clicks, Only left.<br />
<br />
* '''Razer'''<br />
** Naga Wired USB mouse - the mouse seems to present itself as a keyboard because the numpad on the left-hand side of the device works but the cursor doesn't move.<br />
<br />
* '''Roccat'''<br />
** Kone[+] Wired USB mouse - Nothing happens when moving the mouse, haven't looked further into the issue (B)<br />
<br />
* '''Trust'''<br />
** Optical USB Mouse MI-2250 - Nothing happens when moving the mouse (B)<br />
<br />
* '''Xenta'''<br />
** Multimedia Wireless Keyboard and Mouse Set (Mouse Model: HM-3301) (B) - frequent lost connection giving stuttering mouse cursor indicating USB current not enough for dongle<br />
<br />
== USB Real Time Clocks ==<br />
*Cymbet<br />
** Cymbet CBC-EVAL-06 USB Real Time Clock (FT2232 to SPI to RV-2123)<br />
Device information at http://www.cymbet.com/pdfs/DS-72-22.pdf<br />
Code to access the RTC from Linux: https://github.com/owendelong/Cymbet-RTC<br />
Does not require a powered hub.<br />
<br />
== USB WiFi Adapters ==<br />
<br />
See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing<br />
<br />
There is a howto on installing the TL-WN722N adapter [http://elinux.org/RPi_Peripherals#Wireless:_TP-Link_TL-WN722N_USB_wireless_adapter_.28Debian_6.29 here], which also acts as a guide for installing others too.<br />
<br />
===Working USB Wifi Adapters===<br />
<br />
These adapters are known to work on the Raspberry Pi. This list is not exhaustive, other adapters may well work, but have not yet been tried.<br />
<br />
'''Note:''' A WiFi adapter will probably need more power than the Raspberry Pi USB port can provide, especially if<br />
there is a large distance from the WiFi adapter to the WiFi Access Point. Therefore, you may need to plug the WiFi adapter into a powered USB hub.<br />
<br />
* '''3COM'''<br />
** 3CRUSB10075: ZyDAS zd1211rw chipset (!)<br />
<br />
* '''7DayShop'''<br />
** W-3S01BLK, W-3S01BLKTWIN : Unbranded product available from 7DayShop, in a single or twin pack. [http://www.7dayshop.com/catalog/product_info.php?cPath=777_9&products_id=112046], [http://www.7dayshop.com/catalog/product_info.php?&products_id=112527]. Tested on Debian Wheezy, with the dongle attached directly to the RPi along with the wireless keyboard receiver. Shows up as a Ralink RT5370 device, and no drivers or additional software downloads required. Created wpa.conf, edited 'interfaces' file and restarted the networking. The manufacturer portion of the MAC address (7cdd90) is assigned to "Shenzhen Ogemray Technology Co., Ltd."<br />
** It works without additional software connected directly to a Rev 2 Pi but stops working after a period of time (3 to 4 hours) with a fully updated Wheezy and all the 'USB workarounds' [http://elinux.org/Rpi_USB_check-list] in place. <br />
<br />
* '''Alfa'''<br />
** AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware package)<br />
** AWUS036NH: Tested on Arch Linux ARM using the rt2800usb module.<br />
** AWUS036NH: Tested on Debian Wheezy (with Ralink firmware package). Tested on Raspbian too (drivers from aircrack-ng).<br />
** AWUS036H (500mW version): Tested on Raspbian (drivers from aircrack-ng).<br />
** AWUS036H (1W version): Tested on Raspbian (drivers from aircrack-ng). Needs USB powered HUB or Rev2 of the board / polyfuse bypass.<br />
** AWUS036NHA: Tested on Raspbian (drivers from aircrack-ng). Works fine if connected after boot, otherwise Raspberry Pi won't boot up.<br />
<br />
* '''AirLink101'''<br />
** AWLL5088: Tested on Debian Wheezy. This adapter is based on the OEM Edimax EW-7811Un. For automatic installation, See MrEngmanns script listed below under the Edimax device.<br />
<br />
* '''Asus'''<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N10] USB ID 0b05:1786, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B) (not needed with latest Raspbian “wheezy” 2012-07-15: this Asus works N10 out of the box) Does not support nl80211 APIS, so hostapd won't work.<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N13] USB ID 0b05:17ab, works with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1 image] as it includes kernel [http://www.element14.com/community/message/57635#57660 with 8192u driver built-in] (B)<br />
** WL-167G v1 USB ID 0b05:1706, Ralink RT2571 working out-of-the-box on Debian image from 2012-04-19. Requires powered hub, otherwise it is detected by OS but will not function.<br />
** WL-167G v3 USB ID 0b05:1791, working out-of-the-box on Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17. Does not require powered hub.<br />
<br />
* '''Belkin'''<br />
** Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]. On Debian requires the firmware-ralink package from the non-free repository. The usbcore module needs to be added to /etc/modules [http://www.penguintutor.com/blog/viewblog.php?blog=6281 install instructions].<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Tested on OpenELEC (works OOB), RaspBMC (works OOB), Raspian - 2012-07-15-wheezy-raspbian (followed [http://forum.xbian.org/viewtopic.php?f=7&t=29 instructions here]) '''Powered hub required!'''<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Works on RaspBMC OOB (with NetworkManager plugin). Works WITHOUT powered hub on 5v 800mA power with 6 overvolt (nothing else connected to USB)<br />
** Belkin Components F7D1101 v1 Basic Wireless Adapter [Realtek RTL8188SU] USB ID 050d:945a, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B)<br />
**Belkin Components F6D4050 V1 [Realtek RT3070] USB ID: 050d:935a Driver: RT3572STA(recommended),RT2800USB,RT2870STA. Tested under Arch using [https://wiki.archlinux.org/index.php/Setting_Up_Belkin_F6D4050_Wireless_USB_Dongles this] guide.<br />
**Belkin Components F6D4050 V1/V2 [Realtek RT3070] USB ID: 050d:935a / 935b Driver: RT3572STA. Tested with Raspbian - See [http://iggy82.blogspot.co.uk/2012/08/wireless-n-raspberry-pi-belkin-f6d4050.html installation instructions] - Powered hub not required!<br />
** Belkin Components F7D2102 "N300" Micro Wireless USB adapter. Tested with Occidentalis 0.1. Tested and working on Rasbian wheezy (and RaspBMC), driver RTL8192CU, no powered hub needed (dongle directly attached to the onboard ports)<br />
** Belkin Components F9L1001v1 "N150" Wireless USB Adapter. Tested and working on Rasbian wheezy WITHOUT powered hub. <br />
** Belkin Surf Micro WLAN USB-Adapter (Raspbian Wheezy, unpowered hub, "N150")<br />
<br />
* '''BlueProton'''<br />
** [http://www.element14.com/community/docs/DOC-44703 BT3] USB ID: 0bda:8187; tested on Debian, Fedora & Arch; rtl8187 driver (B)<br />
<br />
* '''Buffalo'''<br />
** USB ID: 0411:01A2 WLI-UC-GNM - Tested on Raspbmc; rt2800usb driver <br />
<br />
* '''Conceptronic'''<br />
** C300RU. Works out of the box in Raspbian. Causes reboot when plugging on a live Rev. 2 RPi<br />
<br />
* '''Conrad'''<br />
** WLAN Stick N150 mini. Works out of the box in OpenELEC, [http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/ requires firmware-realtek and r8712u kernel module on Debian].<br />
** WLAN Stick N150 Nano [Realtek RTL8188CUS]. Requires a powered USB hub. See Micronet SP907NS for installation instructions and script.<br />
<br />
* '''DIGICOM'''<br />
** USBWAVE54 [chipset Zydas ZD1211] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave54]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with zd1211-firmware . <br />
** USBWAVE300C [chipset Ralink 2870] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave300c]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with firmware-ralink . <br />
<br />
* '''D-Link'''<br />
** AirPlus G DWL-G122 (rev. E). USB ID 07d1:3c0f, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository. (However I experience total crashes on raspbian 2012-07-15 after a few minutes of load on the wlan. Will have to investigate via serial console.)<br />
** AirPlus G DWL-G122 (rev. C). USB ID 07d1:3c03, Ralink RT2571. Working out-of-the-box on Arch image from 2012-04-29.<br />
** AirPlus G DWL-G122 (rev. B1). USB ID 2001:3c00, Ralink RT2571. Working out-of-the-box on Arch image from 2012-06-13.<br />
** DWA-110 (Version A1). Requires the ralink package from the non-free repository on Debian.<br />
** DWA-121 (Version A1). Wireless N 150 Pico. Works out-of-the-box with Raspian Wheezy (2012-09-18)<br />
** DWA-123 (Version A1). USB ID 2001:3c17, Ralink RT2800. Working out-of-the-box on Arch image from 2012-04-29. (working without UBS Hub - not yet sure if it achieves full speed though.)<br />
** DWA-131 USB ID 07d1:3303,Realtek RTL8192SU, 802.11n Wireless N Nano. Works out of the box on Raspbian “wheezy”. Verified with direct USB : no powered USB hub needed. Also verified when Nano used in powered USB hub. Someone had trouble configuring SSID/Passphrase in etc/network/interfaces file. But no problem & very easy to configure using wicd : wicd is a gui interface on LXDE for network configuration. Install it using command-line : <code>apt-get install wicd</code>. Once configured ith wicd to auto-run on boot, no need to turn back to LXDE. Recommended.<br />
** DWA-140 (Version B1). USB ID 07d1:3c09, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-140 (Version B2). USB ID 07d1:3c0a, Ralink RT3072. Workaround for faulty firmware binary: Place file rt2870.bin from [https://launchpad.net/ubuntu/oneiric/+source/linux-firmware/1.53/+files/linux-firmware_1.53.tar.gz linux-firmware_1.53.tar.gz] in /lib/firmware. [https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/770232 Explanation].<br />
** DWA-160 (Version B1). USB ID 07d1:3c11, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-160 (Version A2). USB ID 07d1:3a09, Atheros AR9170. (NOTE: I can only get it to work through powered USB hub) requires carl9170-fw firmware [http://http://aur.archlinux.org/packages.php/packages.php?ID=44102]<br />
<br />
* '''Edimax'''<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] USB ID 7392:7811, RTL8192CU, driver blob [http://www.electrictea.co.uk/rpi/8192cu.tar.gz download] via [http://www.element14.com/community/docs/DOC-44703 Element14], works with WPA2-AES-CCMP ([http://www.ctrl-alt-del.cc/2012/05/raspberry-pi-meets-edimax-ew-7811un-wireless-ada.html howto]) (B) - [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Alternative driver download link that works with Raspian]. <b>Note:</b> With current raspbian (2012-09-18-wheezy) it is recognized immediately, the default module works fine; the configuration is easy using wireless-essid and wireless-key in /etc/network/interfaces.<br />
** The EW-7811Un can be powered directly from the Raspberry Pi if the Raspberry Pi is powered using a well regulated power supply.<br />
** A script-based installation for the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] by MrEngman can be found [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=26&t=6256&hilit=edimax on the RasPi forums]. Tested with Debian Squeeze and Raspbian. [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt An installation guide can be found here.]<br />
** Instructions for getting the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] working in Raspbmc (tested RC3) can be found [http://forum.stmlabs.com/showthread.php?tid=780 here].<br />
** Simple step-by-step instructions for [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] which uses the RTL8192 chipset [[RPi_edimax_EW-7811Un]](B)<br />
** [http://www.edimax.com/en/produce_detail.php?pd_id=8&pl1_id=1&pl2_id=44 EW-7318USg] USB ID 148f:2573, rt73usb. RT2573 chipset. Works with powered usb-hub or shorted polyfuses.<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=261&pl1_id=1&pl2_id=44 EW-7711UAn], Ralink RT2870, works perfectly on Arch with a powered hub (not tested without yet). Simply required wireless_tools and wpa_supplicant, the drivers/firmware are included in kernel 3.0. I followed the Arch [https://wiki.archlinux.org/index.php/Wireless_Setup Wireless Setup] instructions.<br />
<br />
* '''edup'''<br />
** [[http://www2.buyincoins.com/details/usb-150m-wifi-wireless-lan-network-card-adapter-antenna-product-1916.html Edup 150MBPS wifi adapter]] USB ID: 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to install the firmware as rt2870.bin in /lib/firmware.([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) (B)<br />
** [http://dx.com/p/ultra-mini-nano-usb-2-0-802-11n-150mbps-wifi-wlan-wireless-network-adapter-48166?item=1&Utm_rid=24958662&Utm_source=affiliate Ultra-Mini Nano USB 2.0 802.11n 150Mbps Wifi/WLAN Wireless Network Adapter] Works stable when using VLC for internet radio receiver.<br />
<br />
** [http://www.szedup.com/show.aspx?id=1681 edup nano EP-N8508] Use method shown [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=7471&p=91736 here] for debian. Requires powered USB hub for adequate power. When directly powered by Pi, it fails after a few minutes. (B) Unusable with analog audio because when data is being send or recieved the audio get disorted.<br />
<br />
* '''Eminent'''<br />
** EM4575 - rt2800usb driver.<br />
<br />
* '''EnGenius'''<br />
** EUB9603 EXT - Realtek r8712u driver <br />
<br />
* '''Gigabyte'''<br />
** Gigabyte GN-WB32L 802.11n USB WLAN Card. Works with the rt2800usb driver.<br />
<br />
* '''GMYLE'''<br />
** Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.<br />
<br />
* '''IOGear'''<br />
** [http://www.element14.com/community/docs/DOC-44703 GWU625] USB ID 0bda:8172, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian Squeeze and install firmware-realtek from non-free squeeze repo. No need to download firmware when using Debian Wheezy (B)<br />
<br />
* '''Linksys'''<br />
** Linksys (Cisco) WUSB100 ver.2 1737:0078, tested on raspbian; follow [http://www.brucalipto.org/linux/the-raspberry-diary-wusb100-wireless-n/ Brucalipto.org] instructions; not stress tested but works without issues for light network load.<br />
** Linksys (Cisco) WUSB600N, test on raspbian, details [http://elibtronic.ca/content/20120731/raspberry-pi-part-1-wifi-support here]<br />
** Linksys WUSB54GC (manufactured 07/2008) No issues! needs powered hub on version 1.0 boards.<br />
<br />
* '''LogiLink'''<br />
** Wireless LAN USB 2.0 Nano Adapter 802.11n LogiLink [http://www.logilink.eu/showproduct/WL0084B.htm] is working even usb powered.<br />
<br />
* '''Micronet'''<br />
** Micronet SP907NS, 11N Wireless LAN USB Adapter (uses Realtek RTL8188CUS) works plugged directly into R-Pi USB (B) [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt Debian installation instructions] IMPORTANT: read the instructions first to avoid problems, and [http://dl.dropbox.com/u/80256631/install-rtl8188cus-latest.sh Auto-install script]. The script has been used to install other adapters using the RTL8188CUS chip. [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Updated driver] that handles the latest rpi-updates that kill the original driver, download for manual installation, automatically installed by the Auto-install script.<br />
<br />
* '''MSI'''<br />
** 0db0:6861 MSI-6861 802.11g WiFi adapter (US54G): works with external powered USB hub, requires firmware from [http://sourceforge.net/projects/zd1211/files/zd1211-firmware/ here], power management must be disabled: <code>iwconfig wlan0 power off</code><br />
<br />
* '''Mvix'''<br />
** Mvix Nubbin (MS-811N): works out of the box on Raspbian "wheezy" and does not need a powered USB hub.<br />
<br />
* '''Netgear''' <br />
** N150: Reported as WNA1100 device, uses the Atheros ar9271 chipset. On Debian, requires the <code>firmware-atheros</code> package from the <code>squeeze-backports</code> non-free repository (!)<br />
** N150: Some versions reported as Realtek RTL8188CUS device. Read Micronet entry above and use RTL8188CUS script for installation. Works best plugged into powered USB hub.<br />
** WG111v1: Prism54 chipset. Needs powered hub. Follow info for Prism54 chipset on Debian wiki.<br />
** WG111v2: Realtek rtl8187 chipset (!)<br />
<br />
* '''OvisLink'''<br />
** Evo-W300USB: USB ID 148f:2270 Ralink Technology RT2770. apt-get install firmware-ralink<br />
<br />
* '''Patriot Memory'''<br />
** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered usb hub.<br />
** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module<br />
<br />
* '''Ralink'''<br />
** inner 02 joggler wifi usb RT2770F USB-ID 148f:2770 (firmware-ralink required) (only got dhcp on powered hub)<br />
** [http://www.dx.com/p/24688 RT2070] USB-ID 148f:2070 firmware is already loaded into Raspbian. For Debian, the firmware must be installed ([http://wiki.debian.org/rt2870sta instructions]). Needs a powered USB hub.<br />
** [http://www.element14.com/community/docs/DOC-44703 RT2501/RT2573] USB-ID 148f:2573 (firmware-ralink required) (B)<br />
** RT5370 USB-ID 148f:5370 ([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) [[RPi_Ralink_WLAN_devices]](B). An image of an adapter with this chip can be found [http://i.imgur.com/wRF7L.jpg here].<br />
<br />
* '''Rosewill'''<br />
** RNX-N180UBE Wireless B/G/N Adapter<br />
*** Realtek RTL8191SU chipset, USB-ID 0bda:8172<br />
*** Tested in Arch, works out of box. Powered USB hub required.<br />
*** Tested in Raspbian, used wicd to configure network settings. Powered USB hub Required.<br />
*** Tested in Raspbmc. Needs package firmware-realtek and used wicd-curses to configure. Powered USB hub required<br />
** RNX-G1 Wireless B/G Adapter<br />
*** Realtek RTL8187 chipset, USB-ID 0bda:8187<br />
*** Tested in Arch, works out of box. USB hub required.<br />
** RNX-MiniN1 (RWLD-110001) Wireless-N 2.0 Dongle (Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter)<br />
*** Tested in Raspbian, powered from USB hub.<br />
<br />
* '''Sagem'''<br />
** Sagem Wireless USB stick XG-760N : USB ID 079b:0062, Module is not shipped in Debian image, but can be "sudo apt-get install zd1211-firmware"<br />
<br />
* '''Sempre'''<br />
** Sempre Wireless USB stick WU300-2: USB ID 0bda:8172, Realtek r8712u driver + firmware-realtek package. Module is shipped in Raspbian image. If you need to build it for other distros, read this: http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/<br />
<br />
* '''SL'''<br />
** SL-1507N: USB 802.11n 150M WiFi Wireless Lan Network Card Adapter SL-1507N Black<br />
*** I bought this on on eBay for $4.19 (free shipping) @ http://www.ebay.com/itm/270853614804?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_4379wt_1199<br />
*** It worked out of the box on Raspbmc RC4, with the network manager add-on; seems to be an rt2800usb<br />
*** dmesg output "usbcore: registered new interface driver rt2800usb"<br />
<br />
* '''SMC'''<br />
** SMCWUSBS-N : Hardware detected as rt2800 but missing firmware; "sudo apt-get install firmware-ralink" fixed it<br />
** SMCWUSB-G : Gives "couldn't load firmware" error. "sudo apt-get install zd1211-firmware" fixes it.<br />
<br />
* '''Sony'''<br />
** Sony UWA-BR100 802.11abgn Wireless Adapter [Atheros AR7010+AR9280] (Vendor ID: 0411, Product ID: 017f) - Tested with Raspbian. Needs package firmware-atheros.(B)<br />
<br />
* '''Tenda''' <br />
** USB 11n adapter on a G network: Ralink 2870/3070 driver (!)<br />
** Tenda W311U Mini 11N Wireless USB Adapter (USB-ID 148f:3070): Ralink 2870/3070 driver; needs powered hub. [http://blog.modmypi.com/2012/06/installing-tenda-w311u-mini-wireless.html Debian installation instructions]<br />
** Tenda W311U+ Wireless USB Adapter - Tested with Raspian.<br />
<br />
*'''The Pi Hut'''<br />
** USB 802.11n WIFI adapter (from [http://thepihut.com/products/usb-wifi-adapter-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''TP-Link'''<br />
** TL-WN422G v2 (ath9k_htc) Works OOTB in Debian Wheezy Beta. Runs without powered Hub when plugged into running RasPi, but the RasPi won't boot while the stick is plugged in.<br />
** TL-WN721N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B) | works OOTB with wheezy raspbian (2012-08-16) connected directly to raspberry pi (B) and AP functionality tested with hostapd.<br />
** TL-WN722N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B)<br />
** TL-WN723N (RTL8188SU); works OOTB with raspbian 2012-09-17, (B) stable with 1A PSU and without powered USB hub on r2.0.<br />
** TL-WN821N v3 (ath9k_htc, htc_7010.fw); works out of the box on ArchLinuxARM and on OpenElec (>r11211), Problems with prior OpenElec; needs powered USB Hub (B) <br />
<br />
* '''Trendnet'''<br />
** [http://www.wikidevi.com/wiki/TRENDnet_TEW-648UBM TEW-648UBM] USB ID: 20f4:648b, works OOTB with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/ Adafruit Occidentials Raspbian Wheezy variant] as it includes kernel with [http://www.wikidevi.com/wiki/Special:Ask?title=Special%3AAsk&q=%5B%5BChip1+model%3A%3ARTL8188CUS%5D%5D&po=%3FInterface%0D%0A%3FFCC+ID%0D%0A%3FVendor+ID%0D%0A%3FDevice+ID%0D%0A%3FChip1+model%0D%0A%3FSupported+802dot11+protocols%0D%0A%3FMIMO+status%0D%0A%3FOUI%0D%0A&sort_num=&order_num=ASC&eq=yes&p%5Bformat%5D=broadtable&p%5Blimit%5D=500&p%5Bsort%5D=&p%5Boffset%5D=&p%5Bheaders%5D=show&p%5Bmainlabel%5D=&p%5Blink%5D=all&p%5Bsearchlabel%5D=&p%5Bintro%5D=&p%5Boutro%5D=&p%5Bdefault%5D=&p%5Bclass%5D=sortable+wikitable+smwtable&eq=yes RTL8188CUS driver built-in] (B)<br />
<br />
* '''Widemac'''<br />
** RT5370 Wireless Adapter from [http://www.ebay.co.uk/itm/180887771838?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Ebay] runs without powered hub. Follow these [http://elinux.org/RPi_Ralink_WLAN_devices instructions] but go to [http://ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/ ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/] and pick the latest firmware-ralink_0.xx_all.deb<br />
<br />
* '''ZyXEL'''<br />
** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)<br />
<br />
===Problem USB Wifi Adapters===<br />
<br />
These adapters were tested and found to have issues the Raspberry Pi. Note [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=6928] as a possible solution/explanation for errors while running LXDE.<br />
<br />
* '''Alfa'''<br />
** AWUS036NHA (Vendor ID: 0cf3, Product ID: 9271) - Tested with Raspbian. Works fine if connected after boot. Kills boot process if previously attached. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=16809&p=169469#p169469 Details here.]<br />
<br />
* '''EDIMAX'''<br />
** EW-7811Un (Vendor ID: 7397, Product ID: 7811) - Reports as containing the Realtek RTL8188CUS chipset listed below, no lockup or kernal oops under wheezy but dmesg reports constant timeouts trying to initialize the module.<br />
<br />
* '''Linksys'''<br />
** WUSB300N (Vendor ID: 13B1, Product ID: 0029) - Tested with Raspbian, OpenELEC, among others. No Linux chipset support for Marvell 88W8362 at all.<br />
<br />
* '''LogiLink'''<br />
** WL0085 tested under debian (squeeze, wheezy, raspbian); no stable connection can be established. This gets even worse when X is running.<br />
<br />
* '''MicroNEXT'''<br />
** MN-WD152B (Debian image) modprobe hangs when plugged in, lsusb hangs. udevd errors in the logs. [http://www.element14.com/community/thread/17632] [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=6737]<br />
*** Possible fix: try the new [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1] image (based on Raspbian Wheezy) as it includes the needed 8192cu driver builtin to the kernel<br />
<br />
* '''Netgear'''<br />
** WNDA3100v2 tested with debian (wheezy); no driver for broadcom chipset (see [http://www.wikidevi.com/wiki/Netgear_WNDA3100v2 http://www.wikidevi.com/wiki/Netgear_WNDA3100v2]).<br />
<br />
* '''Realtek'''<br />
** RTL8188CUS USB-ID 0bda:8176, kernel oops in dmesg and freeze when pulled from USB. (B)<br />
<br />
* '''Trendnet'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TEW-424UB] USB ID: 0bda:8189; tested on Debian, Fedora & Arch; rtl8187 driver; errors with LXDE running (B)<br />
<br />
* '''TP-Link'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TL-WN821N] USB ID: 0cf3:7015; tested on Debian; requires [http://linuxwireless.org/download/htc_fw/1.3/htc_7010.fw htc_7010.fw] firmware; ath9k_htc driver; errors with LXDE running (B)<br />
** TL-WN723N USB ID: 0bda:8176; tested on Arch without a powered hub; it seems to draw too much current.<br />
<br />
== USB Bluetooth adapters ==<br />
===Working Bluetooth adapters===<br />
* Asus USBIA-EG (paired with Asus Blutooth Keyboard/Media Center Remote<br />
** Verified works error-free in XBMC. Text echo problems exist in Raspbian<br />
* Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) - (USB ID 0a12:0001)<br />
** Example of above is; TOPDIGI UA01 Bluetooth USB Dongle Plug and Play (install bluez package from std repos)<br />
** Tesco own brand 'Technika' Nano Bluetooth Adaptor has the Cambridge Silicon Radio chipset and works fine, cost £5.97 at time of posting.<br />
** Hama USB Bluetooth 3.0 adapter (Class 1) ~£10 on amazon.co.uk.<br />
** Another sample: Product ID: 0a12:0001, pictured here: http://www.element14.com/community/message/58288<br />
** RiiTek RT-MWK02+ - comes with a usb bluetooth adapter that works perfectly for both the RiiTek mini bluetooth keyboard/mouse and other bluetooth devices. Tested both on builtin USB and on powered USB hub. There are other RiiTek bluetooth (and non-bluetooth wireless) devices on the working list. Bluetooth adapter shows up in lsusb as "0a12:0001 Cambridge Silicon Radio" - this is notable as most other sources of this chipset do not seem to be available in the US.<br />
* D-Link DBT-122, with ID 07d1:f101, using a Broadcom chip<br />
** http://www.element14.com/community/message/58288<br />
* IOGear GBU321 (Broadcom BCM2045 Chipset)<br />
** Works with Raspbian Wheezy directly attached to Pi and via powered USB hub.<br />
* Trust BT-2400p<br />
** Working well with Raspbian Wheezy directly attached to Pi. Using with sma-bluetooth (SMA Solar Inverter reading software).<br />
<br />
===Problem Bluetooth adapters===<br />
* '''Belkin'''<br />
** Belkin F8T017. Tested with Raspbian 2012-07-15 and bluez installed with apt-get. When dongle is inserted into Pluscom powered USB hub, my remote PuTTY session scrolls incredibly slowly (testing with ls -R to generate text). Suspect network issue. Lots of errors on dmesg too. Pi itself is responsive when using directly. On removal of the device everything goes back to normal.<br />
* '''Generic'''<br />
** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.<br />
* Asus USB-BT211<br />
** Shows up as HCI device in Raspbian, but does not scan or pair.<br />
** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962<br />
<br />
== USB Ethernet adapters ==<br />
===Working Ethernet adapters===<br />
* '''Wintech'''<br />
** USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver. Probably needs more than 100 mA current. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=46&t=8708#p106136]<br />
* '''LogiLink'''<br />
** USB 2.0 UA0144: AX88772 chipset using the asix kernel driver. Tested only on powered USB hub so far.<br />
** LogiLink Fast EN USB 2.0 to RJ45 Adapter: Test on wheezy-Raspian (2012-08-16) without USB Hub will be confirmed<br />
lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter <br />
* '''Apple'''<br />
** Apple USB Ethernet Adapter using asix kernel driver. Works out of the box on Raspbian, haven't tested on any other OS.<br />
* '''Edimax'''<br />
** Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Works out of the box. Needs its own power source.<br />
* '''A-Link'''<br />
** A-Link NA1GU Gigabit USB 2.0 ethernet adapter<br />
This adapter works, but (probably) requires a bit of work. The driver for the chipset (Asix AX88178) included with the Raspbian kernel (v 3.1.9+ Aug 7 2012) does '''not''' work. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. :-( In order to make it work you need to download the latest driver from [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=84;71;100&PLine=71 the chipset manufacturer]. The version I used was "Linux kernel 3.x/2.6.x Driver" v4.4.0, released 2012-05-18. Fortunately this is GNU GPLv2 -licenced source code and not a binary blob, so compiling it for the Raspberry Pi is perfectly doable. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. >:-( Fortunately there is [https://www.grendelman.net/wp/compiling-kernel-modules-for-raspbian-raspberry-pi a very useful guide] for how to get the sources from github, and preparing that source so that you can compile modules. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make && sudo make install". Reboot and you should have a fully working ethernet adapter.<br />
<br />
The adapter seems to work without a powered USB hub, but according to the specifications it can draw up to 190 mA, so there might be stability issues if additional power is not provided.<br />
<br />
===Problem Ethernet adapters===<br />
* Axago<br />
** Axago ADE-X1 10/100 Ethernet Adapter (usb: 9710:7830 driver:mcs7830). Adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. Needed to unplug and plug USB again. Tested with and without powered USB hub.<br />
<br />
== USB Sound Cards ==<br />
You will usually want the <code>alsa</code> package for sound. In the Debian image for Raspberry Pi (and possibly other distributions) USB sound cards are prevented from loading as the first sound card, which can be an annoyance if it's the only device you have. To disable this behaviour edit <code>/etc/modprobe.d/alsa-base.conf</code> and comment out the last line; <code>options snd-usb-audio index=-2</code> . If you are not user ''pi'' you may need to add your username to the ''audio'' group thus: <code>sudo adduser yourusername audio</code> (user ''pi'' usually belongs to this group anyway).<br />
<br />
* '''Creative'''<br />
** [http://asia.creative.com/products/product.asp?category=1&subcategory=207&product=17892 Sound Blaster Play!]<br />
* '''Daffodil'''<br />
** [http://www.amazon.co.uk/gp/product/B002FI7GWK/ref=oh_details_o03_s00_i00 USB Sound Adaptor US01] ('''NB:''' Headphone output only checked so far, some notes on progress etc. can be found at [http://www.cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor.html cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor] - 14.09.2012)<br />
* '''Edirol'''<br />
** [http://www.roland.com/products/en/UA-1A/ UA-1A]<br />
* '''Hercules'''<br />
** [http://www.hercules.com/fr/Cartes-Son/bdd/p/123/gamesurround-muse-xl-pocket-lt3/ Gamesurround Musel XL (Pocket LT3)]<br />
* '''Logilink'''<br />
** [http://www.logilink.de/showproduct/UA0053.htm?seticlanguage=en UA0053 USB Soundcard with Virtual 3D Soundeffects LogiLink]<br />
* '''NuForce uDAC-2'''<br />
** [http://www.nuforce.com/hp/products/iconudac2/index.php NuForce uDAC-2 Headphone Amplifier and USB DAC]<br />
* '''Terratec'''<br />
** [http://www.terratec.net/fr/produkte/Aureon_Dual_USB_12339.html Aureon Dual USB]<br />
* '''Texas Instruments PCM2704'''<br />
** [http://www.ti.com/product/pcm2704 PCM2704 98dB SNR Stereo USB2.0 FS DAC with line-out and S/PDIF output, Bus/Self-powered]<br />
<br />
==USB 3G Dongles==<br />
* Huawei E173<br />
* Huawei E220<br />
* Huawei E160 (AT commands only)<br />
* Franklin U600 from Sprint / VirginMobile<br />
** Use usb_modeswitch and vendor 0x1fac and product 0x0150/0x0151<br />
* Digicom Internet Key 7.2 HSUPA '''MU372-L01''' [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MU372L01]<br />
Tested on Raspbian and Archlinux. Detected as 230d:0001. Works with cdc_acm driver. Install usb_modeswitch.<br />
There are 2 "com ports"( /dev/ttyACM0 and /dev/ttyACM1 ) . Tested with Network Manager.Works also perfectly with SAKYS3G [http://www.sakis3g.org/] tools (!! led is always off !!) and wvdial. A working wvdial.conf : http://ubuntuforums.org/showpost.php?p=10361881&postcount=28 . (for example for Vodafone IT , replace Init3 with this : Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" and replace line Modem = /dev/ttyUSB0 with Modem = /dev/ttyACM1 ) and run with wvdial voda .<br />
<br />
== USB IR Receivers==<br />
SMK Manufacturing, Inc. eHome Infrared Receiver (Works out of the box with OpenELEC)<br />
<br />
== USB Radio devices==<br />
*FM Radio<br />
** ADS InstantFM Music - FM radio tuner works fine under debian.<br />
<br />
== USB TV Tuners and DVB devices==<br />
*August<br />
**DVB-T205, based on rtl2832u chipset, working with [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0 this driver]. Tested with Saorview (Irish DTT service), both HD & SD.<br />
*DVBSky<br />
**[http://dvbsky.eu/Products_S860.html Mystique SaTiX-S2 Sky USB]: Scanning/watching SD and HD works via vdr and streamdev plugin, watching on the Pi directly is laggy as hell. DVB-USB and I2C support must be enabled in the kernel. Needs drivers/firmware from [http://dvbsky.eu/Support.html here]. <br />
*Hauppauge<br />
** Hauppauge NOVA-T Stick (Revision 70xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge NOVA-TD Stick (Revision 52xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge WinTV-HVR-1950 (tested analog tuner with omxplayer)<br />
** Hauppauge WinTV-HVR-950Q (tested Digital OTA with TVHeadend in Raspbian)<br />
*K-World<br />
** K-World UB499-2T Dual DVB-T USB Tuner. IT9137 chipset. With no other USB devices connected Pi can just about power this stick. IR and supplied remote work with XBMC.<br />
*Technisat<br />
**Technisat_SkyStar_USB_HD. Instructions: http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_HD Used the Pi to receive and redirect it via network to another host. Didn't try to play back the stream on the Pi itself. Tested with Astra 19.2E radio and SD-TV channels<br />
*Generic<br />
** [http://www.onsources.com/product_images/a/757/watch_and_record_digital_tv_dongle__44323_zoom.jpg DVB-T USB Dongle (Silver casing)], based on AF9015 chipset.<br />
** [http://www.electrodepot.fr/media/catalog/product/cache/1/image/500x/9df78eab33525d08d6e5fb8d27136e95/P926993.jpg DVB-T USB Dongle], based on RTL2832 FC12 (HD/SD), IR detected but not tested<br />
<br />
== USB Webcams ==<br />
<br />
Debian image is missing v4l kernel modules, so video devices are not available. Kernel and firmware upgrade can possibly be used to fix this[http://blog.pixelami.com/2012/06/raspberry-pi-firmware-update-for-debian-squeeze/].<br />
<br />
===Working USB Webcams===<br />
*'''Creative'''<br />
**Creative VF0470 Live! (works out of the box on ArchLinux)<br />
**Creative VF0260 Live! Cam Vista IM (works out of the box)<br />
**Creative VF0640 Live! Cam Socialize (works on Raspbian at 320x240 resolution, 15fps)<br />
**Webcam Notebook PD1170 (detects, untested)<br />
<br />
*'''HP'''<br />
**Webcam HD-2200 [http://www.amazon.com/HP-Webcam-HD-2200-BR384AA-ABA/dp/B004UR9P9Q/ (Amazon)] [http://shopping.hp.com/en_US/home-office/-/products/Electronics/Webcams/BR384AA?HP-HD-2200-Webcam (HP)] [http://www.walmart.com/ip/HP-Webcam-HD-2200/16775645 (Walmart)] <br />
**Webcam HP-3100 - UVCVideo /dev/video0 Needs chmod to 666 to operate. Will work without hub if only device in USB ports. Works with both Arch and wheezy out of the box<br />
<br />
*'''Logitech'''<br />
**Webcam C100 Model Number V-U0013 (works fine without powered hub - Tested on 2012-08-16-wheezy-raspbian image - motion detection was good - video streaming was really slow might be unusable)<br />
**Webcam C200<br />
**Webcam C270 (with external power)<br />
**Webcam C310 does not require a powered hub to capture snapshots<br />
**Webcam C510<br />
**Webcam C525 (works fine without powered hub)<br />
**HD Webcam C615 (works fine without powered hub)<br />
**Webcam C910 (with external power, is uncvideo)<br />
**QuickCam Orbit/Sphere USB webcam (ext. power) <br />
**QuickCam Pro 9000 - powered by Raspi, working on debian wheezy<br />
**Webcam Pro 9000 (046d:0809), powered by RPi (measured ~120 mA capturing at ~5 fps), works on Arch<br />
<br />
*'''Medion'''<br />
** MD86511 - powered by Raspi, working on Raspbian “wheezy” from 2012-07-15<br />
<br />
*'''Microsoft'''<br />
**Xbox Live Vision camera (045e:0294), powered by Raspi, working on Arch<br />
**LifeCam Cinema 720p USB HD Webcam H5D-00001 - Powered by USB Hub. Working on Raspbian "wheezy"<br />
**LifeCam HD-6000 - Powered by Raspberry Pi. Working on Raspbian "wheezy" (2012-07-15)<br />
**LifeCam NX-6000 - Powered by Raspberry Pi. Working on Debian "wheezy"<br />
**LifeCam VX-7000 - Powered by USB Hub. Working on Raspian "wheezy"<br />
**LifeCam VX-3000 - On "raspbian" wheezy (though there do appear to be some issues with image quality and getting partial frames and such, with fswebcam)<br />
**LifeCam VX-800 - Powered by Raspberry Pi. Working out of the box on Raspbian [http://www.amazon.it/Microsoft-JSD-00008-LifeCam-VX-800/dp/B0057FWVSC (Amazon)] Doesn't work at full 640 * 480 resolution but OK at 352 * 288.<br />
<br />
*'''Sony'''<br />
**PlayStation Eye (for PlayStation 3) (the occasional frame is corrupted/stutters when running at 640x480)<br />
**PlayStation Eyetoy (for PlayStation 2) (Occasional 'mangled frame' directly connected to Rev 2 Pi)<br />
<br />
*'''Trust'''<br />
** 2MP Auto Focus Webcam (works out of the box on ArchLinux)<br />
<br />
===Problem USB Webcams===<br />
<br />
*'''Creative'''<br />
**WebCam Pro / PD1030 - ov519 driver crashes almost immediately. ("gspca: ISOC data error: [0] len=0, status=-4004")<br />
<br />
*'''Logitech'''<br />
**Webcam Pro 9000 - Has issues capturing images at higher than default resolutions (using motion - Arch and Debian).<br />
**Webcam Pro 4000 - It uses pwc driver which does not work. Maybe it's because of general Raspi USB bug.<br />
<br />
*'''Microsoft'''<br />
**Lifecam HD5000 - Picture breaks up at the bottom<br />
**LifeCam Studio/Cinema - Has UVC issues detailed here [http://www.ideasonboard.org/uvc/#devices]. Horizontal lines problem [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12304]. Stability issues [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12247].<br />
<br />
*'''Sony'''<br />
**Eye Toy (PlayStation 2) model SLEH 00030 - (OV519 camera). Picture constantly breaks up on xawtv and wxcam under Arch Linux. Noted there were ISOC data error len=0 status=-4004 errors in dmesg. This happens when powered from the Pi and when powered from a Pluscom USB hub. Arch was updated on 17th July 2012<br />
<br />
*'''Trust'''<br />
**SPACEC@M 200 - (OV511 camera). Picture stops after a few seconds in xawtv under Arch Linux and xawtv reports libv4l2 errors. This happens when powered from the Pi and when powered from a Pluscom USB Hub. Arch was updated on 17th July 2012<br />
<br />
== USB GPS devices ==<br />
*Royaltek<br />
**Royaltek RGM 2000 SiRF2 using the included serial (TTL) to USB - converter. That uses a Profilic pl2303-chip so you'll need to compile the module or the kernel manually<br />
*Garmin<br />
**Garmin eTrex Vista HCx: Works but may draw much power. To get it working (software part): https://wiki.openstreetmap.org/wiki/USB_Garmin_on_GNU/Linux<br />
*GlobalSat<br />
**GlobalSat BU-353 Does not require a powered hub, works fine when directly plugged into the RPi. On Raspian, requires the gpsd and gpsd-client packages. For some reason, the gpsd daemon does not always start correctly on boot. You may need to do something like the following to manually restart it:<br /><pre>sudo killall gpsd; sudo gpsd /dev/ttyUSB0 -F /var/run/gpsd.sock</pre><br />
<br />
*Wintec<br />
**WBT-200: No problem on Debian<br />
*Holux<br />
**Holux M-215: Works fine on Arch, uses Silicon Labs CP210x RS232 serial adaptor driver<br />
*Bluenext<br />
**Bluenext BN903S: No problem on Debian image (19-04-2012).<br />
<br />
== USB UART adapters ==<br />
The USB UART adapter is used to access the serial console of the Raspberry Pi from a development host such as a laptop or desktop PC. The USB end connects to the PC and the UART header end connects to the USB. While it is possible to connect the USB end to another Raspberry Pi, this configuration has not been tested unless explicitly mentioned against an individual entry below.<br />
<br />
*'''FTDI'''<br />
**FT232 chip based adapters works for some people but others find it hangs Linux when the port is opened. module is ftdi_sio<br />
<br />
** FT2232D dual RS232/FIFO works (used in various JTAG devices)<br />
<br />
*Prolific<br />
**PL2303 chip based adaptors works fine on latest Debian tested with minicom and gtkterm<br />
<br />
== Other, exotic USB devices ==<br />
=== USB to SATA ===<br />
*'''Nippon Labs'''<br />
** 2.5" SATA HDD USB Adapter with silicone HDD sleeve. Model: USB-ADT-25SATA. Works on powered Hub, not directly to Raspberry Pi. Built-in "Y" power adapter.<br />
<br />
=== CAN Bus ===<br />
*PEAK-System (www.peak-system.com)<br />
**PCAN-USB using the driver (kernel module) from http://www.peak-system.com/fileadmin/media/linux/index.htm<br />
=== Home automation ===<br />
*Tellstick (www.telldus.com), installation [[R-Pi_Tellstick_core|instructions]]<br />
**Depends on libftdi1<br />
<br />
=== Touch Screen ===<br />
*ACER T230H touch screen [http://support.acer.com/acerpanam/monitor/2009/acer/t230h/t230hnv.shtml]<br />
**USB TS identifies as "Quanta Computer, Inc. Optical dual-touch panel", module hid_quanta<br />
**Seems to draw over 200 mA from USB!<br />
=== Floppy Disk Drive ===<br />
*Samsung USB Floppy Drive SFD-321U/HP<br />
**I suppose a floppy drive might be considered exotic nowadays!<br />
**LSUSB lists it as Samsung Electro-Mechanics Co. Floppy Disk Drive<br />
**Only tried connected to a powered USB hub, as the drive is labelled 5V at 0.5A on a Raspberry Pi running Debian Wheezy.<br />
**tail -f /var/log/syslog looking for mount device when plugged in, came up as SDA in testing.<br />
**sudo mkdir /media/floppy<br />
**sudo mount /dev/sda /media/floppy<br />
**Contents of floppy now available in /media/floppy<br />
**To remove drive, ensure no sessions have the floppy directory as the current working directory.<br />
**sudo umount /media/floppy<br />
=== USB Missile Launcher ===<br />
*USB Missile Launcher / Rocket Launcher sold in UK by Marks and Spencer but also sold under a range of other names.<br />
**USB ID 1130:0202 Tenx Technology, Inc. Use apt-get install pymissile (python code) and there is C code at [http://sourceforge.net/projects/usbmissile/ usbmissile from Source Forge]<br />
=== USB Docking Stations ===<br />
*StarTech USB 3.0 to Dual 2.5"/3.5" SATA HDD Dock (SATDOCK2U3GB)<br />
**This is an externally powered dual sata HDD docking station, which has USB2.0 compatibility with the Pi. <br />
**Tested with latest raspbmc and debian wheezy raspbian, 3.1.9+ #168<br />
=== USB RFID Reader ===<br />
*Unbranded 125KHz EM4100 RFID reader from eBay sellers (< £7), the one with a Windows logo on (easily scratches off for Linux users).<br />
**Initially would not work when plugged in directly to RPi. Worked when connected via an unpowered Trust hub. Worked after RPi was modified with 10K resistors over the USB polyfuses (warranty invalidated). Probably would work fine with powered hub.<br />
**Sends a 10 digit string to current window or console as if it was a keyboard. Can be captured independently of keyboard using Linux event interface (/dev/input) but kernel in current distributions does not have CONFIG_INPUT_EVDEV selected so kernel rebuild is necessary.<br />
=== JTAG ===<br />
* FTDI2232D dual RS232/FIFO based JTAG (e.g. SheevaPlug JTAGKey USB-ID 9e88:9e8f)<br />
** works using the RPi as a development host<br />
=== USB 3.0 Multi-Card Reader ===<br />
* US Robotics All-In-One Multi-Format Card Reader (Product # USR8420) Accepts 5 cards simultaneously<br />
** SD/MMC + MS/MS PRO or DUO/DUO PRO + CF/MD + SM + SD/MMC or MS/MS PRO. Useful for backing up cards containing other OS Distros<br />
<br />
== PS2 / AT to USB Converters ==<br />
<br />
* Unbranded active converter known as the "blue cube". Based on the Cypress CY7C63723C 8 bit RISC. Please see http://geekhack.org/showwiki.php?title=PS2-to-USB+adapters for more information.<br />
Note that although the adapter might work, PS/2 keyboards were not designed to be low power USB devices, so they might not meet the requirement to work with considerable lowered supply voltage (4.4 volt) provided by the USB ports of the raspberry PI. These keyboards should work when powered by a powered hub. <br />
<br />
'''Tested PS2/AT keybords'''<br />
<br />
All above tested with the famous "blue cube" on a powered USB hub.<br />
<br />
*IBM Model F (please note requires an additional AT to PS2 converter)<br />
*Dell AT101w<br />
*Northgate Ominikey Ultra T (please note requires an aditonal AT to PS2 converter)<br />
<br />
* 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller<br />
** Working: Ipex RT215KTW PS/2 keyboard<br />
** Not working: HP SK-2502 PS/2 keyboard (gets power but does not init - three LEDs remain permanently lit. Keyboard + Holtek converter work on a Linux PC, although this keyboard doesn't work with some native PS/2 ports.)<br />
<br />
== Power adapters ==<br />
The Raspberry Pi uses a standard Micro USB (type B) power connector, which runs at 5v. Generally you can use a MicroUSB to USB cable and then either power the Raspberry Pi directly from your main computers USB ports (if they provide enough power), or by using a USB to Mains adaptor. A number of mobile phones use MicroUSB power cables, and these are compatible with the Raspberry Pi in most cases. Below is a list of power adaptors known to work.<br />
<br />
===Working power Adapters===<br />
* '''AlcaPower'''<br />
** 5V 2.5A Model AP5A - Charger/switching with 7 connectors(also Microusb)<br />
* '''Ansmann'''<br />
*** Dual USB charger slim, Model-Nr. 1201-0001<br />
* '''Apple'''<br />
** 5V 2.1A USB charger for iPad2, model A1357<br />
** 5V 1.0A USB Charger for iPod<br />
** 5V 1.0A USB Charger for iPhone 4<br />
* '''Amazon'''<br />
** 5V 0.85A USB charger for Kindle<br />
** 5V 2A Mains to USB A adaptor, Branded "CostMad" <br />
* '''Asus'''<br />
** 5V 2.0A USB charger for Google Nexus 7<br />
* '''Belkin'''<br />
** 5V 2.6A 4 port Ultra-Slim Desktop hub (Model F4U040) (RPi running from USB Hub port)<br />
** 5V 2.5A 4 port USB Hub (Model F5U404) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB 2.0 Mobile Powered Hub (Model F4U018) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB Hub (Model F5U706) (RPi running from USB Hub port)<br />
** Mini Surge Protector Dual USB Charger (Model BZ103050-TVL)<br />
** Universal USB Wall Charger (5V 1A) (Model F8Z222uk)<br />
* '''Blackberry'''<br />
** Charger for Pearl Flip 8220, Bold 9600 (B)<br />
** Charger for Tour 9630<br />
** 5V 0.7A Model PSM04R-0500CHW1(M), RIM Part Number HDW-17957-003 (B)<br />
** 5v 750mA Model RIM-C-0004aDUUUC-001, RIM Part Number HWD-24481-001 (comes with Blackberry 9300)<br />
** 5v 750mA Model RIM-C-0004ADUUS-001 035D, Single port plug. (Tested with USB B to Micro USB cable from Logitech H760 Headset)<br />
** 5V 2A Model PSAC10R-050QT, RIM Part Number HDW-34725-001<br />
* '''Dell'''<br />
** USB Hub integrated in Dell monitors (B)<br />
* '''Garmin'''<br />
** 5V 1A charger (Model: PSA105R-050Q) supplied with Garmin Edge 800 GPS. Requires a USB-A to MicroUSB-B cable. Belkin 6ft cable (F3U151B06) works.<br />
* '''Griffin'''<br />
** Power Block Model P2417. 5V 2.1A<br />
** Power Block Model P1190R2 Two USB 5V Outputs, 1Amp each<br />
* '''Hama'''<br />
** 1000mA Travel Charger for Micro USB universal (barcode nr: 4 007249 935854)<br />
* '''HP'''<br />
** 5.3V 2A Charger for HP Touchpad (B)<br />
* '''HTC'''<br />
** 5V 1A TCP-300 USB phone charger (B)<br />
** 5V 1A TC B250 USB charger (HTC R/N: 79H00096-00M)<br />
** 5V 1A TC E250 USB charger (HTC R/N: 79H00098-02M)<br />
* '''i-box (Philex Electronic Ltd)'''<br />
** 5V 1A USB charger, 1 USB socket, no USB lead supplied, Model: 76971HS/02 (available from ASDA and others in the UK) (B).<br />
* '''IDAPT'''<br />
** [http://www.idaptweb.com/universal_chargers/i4/ i4 multi device charger] - 3 interchangeable device tips + USB A socket ([https://twitter.com/andrewmk/status/226057302879375361 see it in use])<br />
* '''Innergie'''<br />
**15W Dual USB Adapter. Model: mMini AC15. Output: 5V, 3A (max per port), 15W max. [http://www.myinnergie.com/DuoPowerKit/specification.aspx Spec Sheet]<br />
* '''Kodak'''<br />
** 5V 1A TESA5G1-0501200<br />
** 5V 1.0A K20-AM<br />
* '''LG'''<br />
** 4.8V 1A Travel Adapter<br />
**5.1V 0.7A Travel Adapter (Model: STA-U34WVI)<br />
**5.1V 0.7A Travel Adapter (Model: STA-U12ER)<br />
* '''Logic'''<br />
** 4 port USB Hub (Model LP4HUB10). (RPi running from USB Hub port, red power line (+5v) inside hub cut) (B)<br />
*'''LogiLink'''<br />
**5V 2.1A Switching power supply, model PA0040 (B)<br />
* '''Logitech'''<br />
** 5V 1A SDC115-USB Remote Control Charger and cable<br />
* '''Maplin Electronics'''<br />
** 5V 1A dual USB power supply, model number H25B-MT-K2<br />
** Micro USB Power Supply N19HX<br />
* '''Medion'''<br />
** 5V 1A USB power supply for OYO ebook reader<br />
* '''Microsoft'''<br />
*** Zune Zune AC Adapter v2 <br />
* '''Motorola'''<br />
** [http://www.amazon.com/Motorola-Micro-USB-Home-Travel-Charger/dp/B004EYSKM8/ 5V 0.85A SPN5504 Charger with Cable]<br />
* '''Nokia'''<br />
** 5V 1.2A AC-10E Charger<br />
** [http://accessories.nokia.com/products/nokia-fast-usb-charger-ac-16/ 5V 1A AC-16E Charger]<br />
* '''Noname'''<br />
** 5V 2.1A KMS-AC09 4 port USB charger (B) [http://www.miniinthebox.com/kms-ac09-universal-ac-adapter-for-ipad-ipad-2-iphone-white_p208568.html]<br />
** 5.2V 1A MW-3NU10GT - no cable, but this one works well (1m): [http://www.amazon.de/gp/product/B005L8VELA]<br />
** 5V 1A Model H-IP008 Serial No. H10T80L068<br />
* '''Novatel Wireless'''<br />
** 5V 1.05A Charger, model number SSW-1811, packaged with Verizon Wireless MiFi device<br />
* '''Orange'''<br />
** 5V 0.7A Charger for Orange San Francisco<br />
* '''Palm'''<br />
** 5V 1A Charger for Palm Pixi+ (B)<br />
* '''Pantech'''<br />
** 5.0V 1A CNR USB with LG DLC100 micro usb cable<br />
* '''Phihong'''<br />
** Switching Power Supply. Model: PSAC09R-050. Output: 5V, 1.8A, microUSB. [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]<br />
* '''PortaPow'''<br />
** PortaPow UK Mains Wall Power Supply<br />
* '''RS Components'<br />
** HNP06UK (RS 7263069) Switching Adapter 5.0V 1200mA<br />
* '''Samsung'''<br />
** 5V 0.7A Charger for Galaxy S model ETA0U10EBE<br />
** 5V 0.7A Charger for Galaxy SII<br />
** 5V 1A Charger for Galaxy Nexus<br />
** 5V 0.7A Charger for Galaxy S Vibrant (SGH-T959)<br />
** 5V 0.7A Travel Adapter model ATADU10EBE<br />
** 5V 1A? Samsung C Series TV USB-port for external HDDs. Running stable with openelec<br />
** 5v ?A(Unknown) Samsung Service Port (USB) on LN32A330J1DXZA 720p 32 inch HDTV <br />
** 5V Unknown Ampere Samsung UA22D5000 & UA32D5000 TV USB Port. Test with Raspbian Wheezy, Raspbmc, and RPITC<br />
* '''Shun Shing'''<br />
** 100-240VAC to 5VDC 1A USB power supply, model SP5Q-AU [http://jaycar.co.nz/productView.asp?ID=MP3455 Jaycar]<br />
* '''Sony Ericsson'''<br />
** 5V 0.7A Charger CST-80<br />
* '''Travel Charger'''<br />
** 5V 2.0A USB Power Adapter, [http://www.amazon.co.uk/gp/product/B0065JCIPU/ Amazon Link]<br />
* '''Technika'''<br />
** 5V 1A USB Power Adapter, model MPASS01 (B)<br />
* '''The Pi Hut'''<br />
** Micro USB Power Supply for the Raspberry Pi. 5V 1000mA (from [http://thepihut.com/products/micro-usb-power-supply-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store]) (also from [http://www.ebay.co.uk/itm/330757401271 eBay ])<br />
* '''Trisonic'''<br />
** TS-CP600T - MICRO USB HOME & TRAVEL CHARGER (5V, 800mA) $3 at Daiso U.S. stores.<br />
* '''TruePower'''<br />
** [http://u-socket.com/ U-Socket] 5V 2.1A AC Receptacle with Built-in USB ports (2.1A per USB port) model ACE-7169<br />
* '''Voltcraft'''<br />
** SPS5-12W, 2500 mA, requires additional USB <-> miniUSB adapter/cable, works perfectly (bought from [http://www.conrad.de/ce/de/product/512660/VOLTCRAFT-SPS5-12W-Steckernetzteil-Steckernetzgeraet-5-VDC-2500-mA-12-Watt Conrad Shop])<br />
<br />
===Problem power Adapters===<br />
* '''Masterplug'''<br />
** Masterplug Surge Protected USB Adaptor 2 x 1A USB Polished Black - USB ports and ethernet don't work with this adapter and some screen artefacts using HDMI.<br />
* '''Monoprice'''<br />
** 5v, 2A 3 Outlet Power Surge Protector Wall Tap w/ 2 Built-In USB Charger - some display artifacts, sometimes unable to find mouse, some failures to boot. Measured less than 4.75v between TP1 and TP2 when used with a Monoprice cable.<br />
* '''Sony Ericsson'''<br />
** 5v, 850mA EP800. Some failures to boot , ethernet loops at boot.<br />
<br />
===External Battery packs (with 5V regulated output)===<br />
* '''Anker Astro3'''<br />
** Anker Astro3 10000mAh with Dual 2A USB Output<br />
* '''Duracell'''<br />
** PPS2 Instant USB Charger<br />
* '''Energizer/XPAL'''<br />
** XP18000 18000mAh Power Pack<br />
* '''Generic - eBay no brand'''<br />
** 6000T Pocket Power 5000mAh - eBay item 271009959140<br />
** Power Bank for iPad/iPhone 5000mAh (looks the same as a New Trent IMP50D or TeckNet iEP380) - eBay item 280914455938<br />
* '''New Trent'''<br />
** iCurve IMP70D 7000mAh (Approx 12hrs from full charge)<br />
** IMP120D 12000mAh<br />
* '''Sinoele'''<br />
** Movpower - Power Bank 5200mAh (8hrs with Wifi active)<br />
* '''TeckNet'''<br />
** iEP387 Dual-Port 7000mAh External Power Bank (The charging lead can be used to connect the Tecknet to the RPi. Ran the RPi with wifi dongle and wireless keyboard receiver for over 9 hours of light use.)<br />
** iEP392 Dual-Port 12000mAh External Power Bank (1A port, ~16.5 hours)<br />
** Rayovac PS60 5v 800mAh<br />
* '''VINZO'''<br />
** Power Bank 5000mAh Grey Output 5V 1000mA<br />
* '''Kodak Power Pack KP1000'''<br />
** 1A USB rechargeable battery pack - see [http://blog.sheasilverman.com/2012/09/its-alive/ Shea Silverman's blog]<br />
<br />
== Display adapters ==<br />
Note that active converter boxes may draw power through the HDMI port, and thus will put an extra load on your PSU, and also increase the current running through the PI's primary input fuse. HDMI ports (and the raspberry PI) are designed so that they deliver a very limited amount of power (50mA) to the TV/Monitor/display-adapter and much more isn't in theory allowed. In fact there is a diode (D1) in series with the power line which can only handle 200mA, if the adapter tries to draw much more than that the diode might fail. Therefore only externally powered adapters are to be recommended. Despite this, many people report success with these high powered devices.<br />
<br />
===HDMI->DVI-D===<br />
There are three kinds of DVI. There is DVI-D, a digital signal fully compatible with HDMI, so a passive cable can be used. There is DVI-I, which is a connector with both analog pins and digital pins. An HDMI to DVI-D adapter fits in a DVI-I female connector. Finally, there is DVI-A. This a fairly rare connection, but occasionally it will be found on some monitors and is an analog interface, in fact the same as VGA!<br />
<br />
Some adapters like Farnell part AK-CBHD03-BK are HDMI to DVI-I, which, while not fitting in a DVI-D monitor, are still compatible. The analog pins simply must be bent.<br />
<br />
The HDMI to DVI-D cable provided by Apple with the 2010 Mac Mini worked. It does not appear this adapter can be purchased separately.<br />
<br />
* AmazonBasics HDMI to DVI Adapter Cable (model SK231) works and is inexpensive.<br />
* [http://www.ebay.com/itm/DVI-Female-to-HDMI-Male-Adapter-Converter-Adaptor-Gold-for-HDTV-Full-HD-/320946033059?pt=US_Video_Cables_Adapters&hash=item4ab9dfd1a3 A generic HDMI-to-DVI converter from eBay]. Works well, but it's probably the cause of some power loss between the RPi and the monitor, causing [http://elinux.org/R-Pi_Troubleshooting#Interference_visible_on_a_HDMI_or_DVI_monitor this] problem. A setting of config_hdmi_boost='''5''' in /etc/boot solved this. Note that config_hdmi_boost='''4''', as suggested in the troubleshooting guide, helped but did not solve the problem completely.<br />
<br />
===HDMI->VGA converter boxes===<br />
Most will require use [[RPi_config.txt]]. Start off with hdmi_safe=1.<br />
<br />
[http://www.element14.com/community/groups/raspberry-pi/blog/2012/08/16/raspberry-pi-hdmi-to-vga-converter Sanoxy HDMI to VGA converter], $27 from Amazon, no changes required with official Raspbian Wheezy image (2012-Jul-15), note: had already disabled overscan previously<br />
<br />
http://www.amazon.co.uk/gp/product/B007KEIRNG -- "Neewer" HDMI to VGA -- some issues discussed below:<br />
However, according to user "Tom1989" the same Neewer HDMI to VGA adapter burned out BAT54 Schottky diode D1 on the RasPi and broke its HDMI output: [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9819 Serious HDMI Problems. What's that smell? Burning Raspberry!]. On that thread, "mahjongg" suggested the NXP (or equivalent) PMEG2010AET as a high-current replacement for D1. The PMEG2010AET has 1A max forward current, much greater than the BAT54's 200 mA limit which may be exceeded by your HDMI -> VGA converter. Remember that the converter's current must come from your RasPi power supply and go through the Micro USB cable and polyfuse F3, so you may get extra voltage drops and/or cause F3 to trip depending on how much current the converter uses. As always with board modifications, YMMV. Also on the "Burning Raspberry!" thread, user "pwinwood" reported the Neewer's current to be 400 mA, which is twice the limit of BAT54 diode D1. "pwinwood" also took the Neewer apart and added its own +5V connection adapted from a USB cable, which bypasses RasPi's Micro USB cable and polyfuse F3.<br />
<br />
http://www.amazon.co.uk/KanaaN-Adapter-Converter-Cable-Resolutions/dp/B007QT0NNW -- "Kanaan" HDMI-VGA<br />
<br />
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130699741793 -- eBay is swarming with $16 converters all like this one.<br />
<br />
This adapter -- http://www.ebay.co.uk/itm/300692770623 -- works from 640x480 up to 1920x1080, audio over HDMI works too.<br />
Sadly the IC's on the PCB have all been scrubbed.<br />
Requires HDMI boost and overscan, [[RPi_config.txt|config.txt]] settings for 640x480@60Hz:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=4<br />
<br>config_hdmi_boost=4<br />
<br>overscan_top=-30<br />
<br>overscan_bottom=-30<br />
<br>overscan_left=-30<br />
<br>overscan_right=-30<br />
<br />
According to user "Mortimer" -- HDFuryPro HDMI to YPbBr/VGA Converter found on Amazon -- http://www.amazon.co.uk/Inputs-Component-Video-YPbPr-Converter/dp/B00797ZZ4S/ -- Works with Raspberry Pi. Tested against a Philips 170B 1280x1024 LCD monitor, producing a full native resolution image. Not tested against a Component Video TV yet, and audio has yet to be got working.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
<br />
According to user "Mortimer" -- HDFury1 1080p HDMI to VGA Converter from HDFury.com. I'm not sure the HDFury1 can be got a hold of easily nowadays, I happened to have access to one to try out. HDFury2, 3 and 4 are available as far as I can tell, but are very pricey compared to alternatives. HDFury1 was around £80 when we bought one for a project at work. HDFury2 seems to be around £130, 3 and 4 are getting on towards £200 or more. So not to be recommended as a solution unless you happen to have one lying around. I don't believe there is any relationship between the company that produces these and the HDFuryPro I bought for myself (See above). I didn't alter any config settings, just plugged it in. It doesn't work without having its external power supply connected, as it requires 0.4A, which is too much draw for the 5V supply available from the HDMI socket on the Raspberry Pi. Its power LED lights, but no picture is produced. In comparison to the HDFuryPro this picture from this device is sharper, but not enough to justify the extra cost.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
http://www.amazon.co.uk/gp/product/B007SM7O2U/ref=oh_details_o02_s00_i00 - "Cable Matters"<br />
<br />
Here It is another option: http://www.dealextreme.com/p/hdmi-v1-4-male-to-vga-female-converter-adapter-cable-white-15cm-130458, is cheap (it's free shipping from china) and works perfectly, I tested it with an Acer VGA monitor (AL1511), without no change in my XBMC distribution.<br />
The config.txt for Raspbian (Flatron VGA monitor 1024 * 768):<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=16<br />
<br>hdmi_force_hotplug=1<br />
<br>disable_overscan=0<br />
<br />
<br />
And another one: http://cgi.ebay.pl/ws/eBayISAPI.dll?ViewItem&item=251086464644. Very cheap but works perfectly. No config.txt changes was needed at all. I've booted Raspbian and OpenELEC. Monitor is detected correctly and the optimal resolution is set (Raspbian) or you can change the res in the menu (OpenELEC). <br />
The /opt/vc/bin/tvservice is able to read monitor edid data. I tested the adapter using NEC 72VM 15" LCD. (1280x1024 60Hz, 1024x768 60Hz, 640x480 works) The adapter is based on Lontium LT8511A chip, but I was unable to get the spec for it.<br />
The D1 diode is getting very hot though. Most likely the adapter drives more than 200mA. The standard RS Components 1,2A usb power supply is able to provide enough power for the RPi and the adapter. I'll try to modify the adapter to connect external power to bypass D1.<br />
Marcin.<br />
<br />
===DVI-D -> VGA active adapters===<br />
None are currently listed<br />
<br />
===Composite->SCART===<br />
SCART adapters (SCART plugs with three RCA connectors in the back), will probably work when used with the yellow RCA plug connected to the R-PI's RCA video output. Additionally using a splitter cable (3.5mm jack plug on one end, and red-white RCA plugs on the other end) will probably work when plugged into the red and white (left and right audio channels) of the SCART adapter.<br />
<br />
* Generic - works<br />
<br />
===Composite->VGA converter boxes===<br />
* [http://www.extron.com/product/product.aspx?id=dvs204| Extron DVS-204] - works no problem!<br />
<br />
== SD cards ==<br />
<br />
Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)<br />
For this reason, please specify product numbers in the lists below, when possible.<br />
<br />
You can also attach the following fields from your card's CID :<br />
<pre><br />
cd /sys/class/mmc_host/mmc?/mmc?:*<br />
echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"<br />
</pre><br />
<br />
please merge with http://elinux.org/RPi_Performance#SD_card<br />
<br />
===Preinstalled SD Cards===<br />
Sandisk SD Cards Preinstalled with the latest Raspbian operating system are available from [http://thepihut.com The Pi Hut's Raspberry Pi Store].<br />
* '''SanDisk''' <br />
** [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
<br />
===Working SD Cards===<br />
<br />
* '''7DAYSHOP.COM''' <br />
** 8GB Professional SDHC Class 10 (man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0)<br />
<br />
* '''Adata''' <br />
** 2GB SD Class 2 Speedy (8B0947 printed on back) This card works with every distro I tried. May be old, may not be the fastest, but is very stable.<br />
** 4GB SDHC Class 4 (BH1109416141G)<br />
** 8GB SDHC Class 2 (MMB3F08GWMCA-GE)<br />
** 8GB SDHC Class 4 (MicroSD w/ adapter)<br />
** 8GB SDHC Class 6 (MMAGR08GUDCA-DB)<br />
** 8GB SDHC Class 10 (AUSDH8GCL10-R)<br />
** 8GB SDHC Class 10 (ASDH8GCL10-R) Tested on 2012-06-18-wheezy-beta.zip<br />
** 8GB SDHC Class 10 (P-SDH8G10-EC from BJ's USA tested on Raspbian)<br />
** 16GB SDHC Class 6<br />
** 16GB SDHC Class 10 (16GSDHC10)<br />
** 16GB SDHC Class 10 (microSD w/ adapter AUSDH16GCL10-RA1)<br />
** 32GB SDHC Class 10 (ASDH32GCL10-R) Tested on wheezy-beta with latest kernel and firmware and raspbian wheezy<br />
<br />
* '''AmazonBasics'''<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH0LS 8GB SDHC Class 10 B0058GH0LS]<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH1IK 16GB SDHC Class 10 B0058GH1IK]<br />
** 32GB SDHC Class 10<br />
<br />
* '''Apacer'''<br />
** 8GB microSDHC Class 10 (with adapter)<br />
** 8GB SDHC Class 6<br />
<br />
* '''Centon'''<br />
** 16GB SDHC Class 4 (1447 printed on back)<br />
<br />
* '''CnMemory'''<br />
** 8GB SDHC Class 4 (Silver/Black label says 'High Capacity Card') 84209_8GB_SDHC, bought from Maplins. No error messages seen, but operation is much slower than with a SanDisk 4GB Class 4 card.<br />
<br />
* '''Dane-Elec''' <br />
** 16GB SDHC Class 4<br />
** 16GB Pro 200X Class 10 DEMS16GB2683ENBA<br />
<br />
* '''Dikom'''<br />
** 16GB SDHC Class 10 (serial 207H3MD016IBSD)<br />
<br />
* '''Duracell'''<br />
** 4GB SDHC Class 4<br />
** 16GB SDHC Class 10 (labelled Pro Photo 200x)<br />
** 32GB SDHC Class 10 (man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0) (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012, following [[RPi_Performance#SD_card]])<br />
<br />
* '''Emtec''' <br />
** 2GB SD man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0<br />
** 4GB SDHC Class 4 (EKMSD4G60XHCN)<br />
** 16GB SDHC Class 10 (EKMSD16G150XHC) (less than half as fast as Sandisk 16gb Class 10)<br />
<br />
* '''Extrememory''' <br />
** 16GB SDHC Class 10 (man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0)<br />
** 32GB SDHC Class 10 (man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0)<br />
<br />
* '''Eye-Fi'''<br />
** 4GB WiFi SDHC (Wi-Fi doesn't work)<br />
<br />
* '''Fugi''' <br />
** 32GB SDHC Class 10 (P10NM00580A) (man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0)<br />
<br />
* '''Hama''' <br />
** 2GB SD Class 2<br />
** 8GB SDHC High Speed Pro Class 6<br />
<br />
* '''Hema (Dutch dept. store)'''<br />
** 4GB<br />
** 8GB SDHC Class 4<br />
<br />
* '''Goodram''' <br />
** 8GB microSDHC Class 4<br />
** 16GB microSDHC Class 4 (SDU16GHCAGRR10)<br />
** 16GB SDHC Class 10<br />
<br />
* '''HP'''<br />
** 8GB SDHC Class 4 (doesn't reboot during first time startup process, but restart again and fine after that).<br />
** [http://www.amazon.com/HP-CG790A-AZ-Flash-Memory-Class/dp/B007X7U224 32GB SDHC Class 10] <br />
<br />
* '''ICIDU'''<br />
** 4GB SDHC Class 10 (also had no issues)<br />
** 16GB SDHC Class 10 (image write had issues, might be my inexperience. It boots & shows Xserver)<br />
** 32GB SDHC Class 10 (had no issues whatsoever, the comment above might be a dud.)<br />
** 8GB microSDHC Class 10<br />
** 16GB microSDHC Class 10 (20MB/sec)<br />
** 32GB microSDHC Class 10 (20MB/sec)<br />
<br />
* '''Integral''' <br />
** 4GB SDHC Ultima Pro Class 10<br />
** 4GB SDHC Class 4 SD-K04G (Purple label)<br />
** 8GB SDHC Ultima Pro Class 6 (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 8GB SDHC Ultima Pro Class 10 (20MB/s) (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 16GB SDHC Ultima Pro Class 6<br />
** [http://www.amazon.co.uk/gp/product/B0047T6XME 16GB SDHC Class 10 Ultima Pro (20MB/s)]<br />
** 32GB SDHC Ultima Pro Class 10 (20MB/s) - Slow to initially boot past the Rainbow Screen.<br />
<br />
* '''Joyflash''' <br />
** 16GB SDHC Class 10 (LTSD1112016GB)<br />
<br />
* '''Kingmax''' <br />
** 4GB SDHC Class 2<br />
** 4GB microSDHC Class 4 (KM04GMCSDHC4) won`t reboot when it`s hot<br />
** 8GB microSDHC Class 4 (KM08GMCSDHC41A) won`t reboot when it`s hot<br />
<br />
* '''Kingston''' <br />
** 2GB SD<br />
** 2GB microSD (N0185-002.A00LF) + Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510)<br />
** 4GB microSD Class 4<br />
** 4GB SDHC Class 4 (SD4/4GB)<br />
** 4GB SDHC Class 10 (SD10V/4GB)<br />
** [http://img341.imageshack.us/img341/1619/dsc0253y.jpg 8GB SDHC Class 4] ([http://img833.imageshack.us/img833/2028/dsc0254br.jpg SD4/8GB]) (does not work with current build of raspbmc, unreliable with raspbian)<br />
** [http://img600.imageshack.us/img600/3849/dsc0251et.jpg 8GB microSDHC Class 4] ([http://img707.imageshack.us/img707/363/dsc0252ld.jpg SDC4/8GB])<br />
** 8GB SDHC Class 6 (SD6/8GB) (errors on boot, boots Debian ok, does not work with raspbmc rc2)<br />
** 8GB SDHC Class 10 (SD10G2/8GB, SD10V/8GB, ultimateX 100X, ultimateX 120X)<br />
** 16GB SDHC Class 4 (SD4/16GB)<br />
** 16GB microSDHC Class 10 (SDC10/16GB)<br />
** 16GB SDHC Class 10 (SD10G2/16GB, ultimateX 100X)<br />
** 16GB SDHC Class 10 (SD4/16GBET)<br />
** 32GB SDHC Class 10 (SD10V)<br />
** 32GB SDHC Class 10 (SD10G2/32GB, ultimateX 100X)<br />
<br />
* '''Kodak''' <br />
** 4GB SDHC Class 2<br />
** 8GB SDHC Class 4<br />
<br />
* '''Kruidvat''' <br />
** 8GB SDHC Class 4<br />
<br />
* '''Lexar''' <br />
** 4GB SDHC Class 4 (Boots consistently and no error messages in log after 1/2 hour use ) (works with Raspbmc)<br />
** 4GB SDHC Class 6 Platinum II (from [http://www.microcenter.com/single_product_results.phtml?product_id=0350735 Microcenter])<br />
** 8GB SDHC Class 4<br />
** 8GB SDHC Class 6 Premium Series<br />
** 8GB SDHC Class 6 Platinum II<br />
** 16GB SDHC Class 6 Platinum II<br />
** 32GB microSDHC HIGH-SPEED Class 10 (from [http://www.amazon.co.uk/Lexar-32GB-Micro-Speed-Reader/dp/B004BR2ZTM Amazon])<br />
** 128GB SDXC UHS-I Card LSD128CTBNA400 (from [http://www.amazon.com/gp/product/B007BZRXK2 Amazon])<br />
<br />
* '''Master'''<br />
** 16GB SDHC Class 10 [man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0]<br />
<br />
* '''Medion'''<br />
** 8GB Class 4 SDHC UK sourced (Aldi)<br />
* '''Microcenter Brand (sold in bins at checkout)'''<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0289508 8GB SDHC Class 4]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349728 8GB SDHC Class 10]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349729 16GB SDHC Class 10]<br />
<br />
* '''Mushkin'''<br />
** 16GB SDHC Class 10 (MKNSDHCU1-16GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226324]<br />
** 32GB SDHC Class 10 (MKNSDHCC10-32GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226235]<br />
<br />
* '''Mustang'''<br />
** [http://www.mustang-flash.de/Products/Flash%20Products/Secure%20Digital/SD-Card/8GB%20Mustang%20SDHC%20Card%20LeMans%2C%20Class%2010%2C%20Retail|SD8GHCCL10MU-R.html 8GB SDHC Class 10]<br />
<br />
* '''MyMemory''' <br />
** 8GB SDHC Class 10 (MYMESDH8G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-8GB-SD-Card-%28SDHC%29---Class-10 MyMemory 8GB class 10] (Latest batch not working)<br />
** 16GB SDHC Class 10 (MYMESDH16G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-16GB-SD-Card-(SDHC)---Class-10]<br />
<br />
* '''NovaTech'''<br />
** 8GB SDHC Class 10 (Integral Branded)<br />
<br />
* '''OCZ'''<br />
** 8GB SDHC Class 6 Gold Series (08110596-8GB-6) tested with Debian Squeeze (official Raspberry Pi distribution debian6-19-04-2012.zip)<br />
<br />
* '''Optima'''<br />
** 8GB SDHC Class 10 (Pro-Speed)<br />
** 8GB SDHC Class 4 - working from 2012-09-18<br />
<br />
* '''Panasonic''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 10 UHS-I (~11.2MB/s read, ~6.2MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 2 (~11.1MB/s read, ~9.7MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (~4.8MB/s read, ~4.4MB/s write, following [[RPi_Performance#SD_card]])<br />
<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PSF8GSDHC10-PC)<br />
** 8GB SDHC Class 10 LX Series (PSF8GSDHC10-PC1)<br />
** 16GB SDHC Class 10 (PSF16GMCSDHC10)<br />
** 16GB SDHC Class 10 LX Series (PSF16GSDHC10) (19.3MB/s read, 9.3MB/s write)<br />
** 16GB microSDHC Class 10 (PSF16GMSHC10) (requires recent kernel update for boot)<br />
** 32GB SDHC Class 10 (PSF32GSDHC10)<br />
** 32GB SDHC Class 10 UHS-1 (PEF32GSDHC10U1) (20.4MB/s read, 12.1MB/s write)<br />
<br />
* '''Peak''' <br />
** 4GB microSDHC Class 4 (MMBTR04GUBCA-ME) tested with Arch<br />
<br />
* '''Philips'''<br />
** 8GB SDHC Class 4 (FM08SD35B)<br />
<br />
* '''Platinum'''<br />
** 4GB SDHC Class 6<br />
** 8GB SDHC Class 6 (man:0x00006f oem:0x0000 name:SMI hwrev:0x1 fwrev:0x0)<br />
** 64GB SDCX Class 10<br />
<br />
* '''Play.com''' <br />
** 4GB SDHC Class 6 (S4E3CD04GEFAA 0907090121106)<br />
<br />
* '''PNY''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 4 Optima (SD-K04G 0834TT1297Y)<br />
** 4GB SDHC Class 4. Micro SD Card with adapter.<br />
** 8GB SDHC Class 6<br />
** 8GB SDHC Class 10. Micro SD card with adapter.<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 10 (P-SDHC16G10-GE)<br />
*** See the note for P-SDHC16G10-EF. Works with Wheezy, does not work with Squeeze, Arch, or Fedora Remix. <br />
** 16GB SDHC Class 10 (P-SDHC16G10-EF) <br />
*** Works with [http://www.raspberrypi.org/archives/1435 Debian Wheezy]<br />
*** Does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
*** Does not work with Arch Linux Arm (archlinuxarm-29-04-2012: no video is displayed, solid red power light, tiny green light)<br />
** 16GB SDHC Class 10 Pro-Elite (P-SDH16U1-30-GE). Works with raspbmc, haven't tested others.<br />
<br />
* '''pqi'''<br />
** 8GB SDHC Class 6 <br />
*** Works with official debian6-19-04-2012<br />
<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 (8DK52-122ME)<br />
<br />
* '''Samsung''' <br />
** 4GB SDHC<br />
** 8GB SDHC Class 6 (MB-SS8GAEU)<br />
** 8GB SDHC Class 10 (MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM)<br />
** 16GB SDHC Class 6 (MB-SSAGAEU)<br />
** 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy], but does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
<br />
* '''SanDisk''' <br />
** 2GB SD, white "SanDisk for Wii" branded, no class mentioned<br />
** 2GB SD (with a circle 2 --probably class 2), writes at 3.5 Mb/s<br />
** 2GB SD Class 2 (BE0816113150D)<br />
** 2GB SD Class 4 Ultra (15MB/s)<br />
** 2GB SD Class 4 Ultra II<br />
** 2GB SD Ultra II (BE0719111366D)<br />
** 2GB SD Extreme III (BE0715105083B)<br />
** 2GB SD Extreme III (BE0804212046D) - 20MB/s - Class 6<br />
** 4GB SDHC Class 2 (BH0820113475D) - Tested with RPITC (Based on Raspbian Wheezy)<br />
** 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 4GB SDHC Class 4 (SDSDB-004G-B35)<br />
** 4GB SDHC Class 4 (SDSDB-004G-BT35). Confirmed working with stock debian6-19-04-2012.img<br />
** 4GB SDHC Class 4 (BH1210821913G)<br />
** 4GB SDHC Class 4 (SDSDH2-004G-AC11, BH1127216239D) Costco 2-pack, booting Wheezy 2012-07-15<br />
** 4GB SDHC Class 4 Ultra (SDSDH-004G-U46) won`t reboot when it`s hot<br />
** 4GB SDHC Class 4 Ultra II<br />
** 4GB SDHC Class 6 Ultra (30MB/s BH1200421822D)<br />
** 4GB SDHC Class 6 Ultra (SDSDH-004G-U46 - BH1136121837G, BH1130521822D)<br />
** 4GB SDHC Class 10 Extreme (BH10297143382G)<br />
** 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 8GB SDHC Class 4 (writes at ~1.5MB/s)<br />
** 8GB SDHC Class 4 Ultra labelled as 15MB/s (BI1024716014G)<br />
** 8GB SDHC Class 6 Ultra <br />
** 8GB SDHC Class 6 micro - MMAGR08GUDCA-DB<br />
*** also SDSDH-008G-U46 - BI1131222083D see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
*** except SDSRH-008G-A11 could be problematic, see below<br />
** 8GB SDHC Class 6 Ultra labelled as 20MB/s (BI11321422083D)<br />
** 8GB SDHC-I Class 6 Ultra labelled as 30MB/s (SDSDH2-008G-AC11)<br />
*** requires updated Squeeze or Wheezy beta<br />
** 8GB SDHC Class 10 Extreme (BI11017514367G)<br />
** 8GB SDHC Class 10 Extreme (B11209116254G) - Managed to get it working with raspbian R3 [http://archive.raspbian.org/images/rpi_pisces_r3.zip rpi_pisces_r3.zip] however does not work with official squeeze nor Arch linux.<br />
** 8GB SDHC Class 10 Extreme (30MB/s HD Video) - working with new [https://github.com/raspberrypi/firmware/blob/9308c7ed387e5422883753f7fb71a75506abd1f8/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-10 for Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 images (BI1130916254G).<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-U46) - Works with stock debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (works with OpenELEC r11493)<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-UDQ46) - Works with stock 2012-09-18-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme (SDSDX-008G-X46/BI1218822414G) - Works with stock 2012-08-16-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-008G-X46) - Works with stock 2012-07-15-wheezy-raspbian<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 16GB SDGC Class 4 (SDSDB-016G-B35) - working with [https://github.com/raspberrypi/firmware/blob/234c19de7cbaaf4997671d61df20a05759066295/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-15 for Debian Squeeze 2012-04-19<br />
** 16GB SDHC Class 6 Ultra (30MB/s) (BL1133921933G) - Work with OpenELEC r11324<br />
** 16GB SDHC Class 10 Ultra(30MB/s) (SDSDU-016G-U46) - Work with stock debian6-19-04-2012 image. Gave Kernel Panic with stock debian6-19-04-2012 image. Worked fine with Wheezy image.<br />
** 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Works with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02)<br />
** 16GB SDHC Class 10 Extreme (45MB/s U1) (BL1203322025G) - Works with 2012-08-16-wheezy-raspbian.img (tested 2012-09-15). Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 16GB SDHC Class 10 Extreme (45MB/s) (SDSDX-016G-X46) (UPC 619659062224) - Works with 2012-09-18-wheezy-raspbian.img (tested 17/10/2012)<br />
** 16GB SDHC Class 10 Extreme (45MB/s) (SDSDXPA-016G-FPP) - Working with latest RaspBMC image (tested 12/09/2012) [http://www.amazon.co.uk/gp/product/B00422J0CG/ref=oh_details_o00_s00_i00 Amazon Link]<br />
** 16GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-016G-A75) - Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 32GB SDHC Class 4<br />
** 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 32GB SDHC Class 6<br />
** 32GB SDHC Class 10 Ultra (30MB/s) - Works with stock debian6-19-04-2012 image<br />
** 32GB SDHC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-032G-X46) - works with arch-04-29-image and latest firmware (booting problems without firmware update)<br />
** 64GB SDXC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-064G-X46) - works with 2012-07-15-wheezy-raspbian<br />
** microSDHC / microSDXC<br />
*** 4GB microSDHC Class 2<br />
*** 4GB microSDHC Class 4<br />
*** 8GB microSDHC Class 2<br />
*** 8GB microSDHC Class 4<br />
*** 8GB microSDHC Class 6 Mobile Ultra (SDSDQY-008G-U46A) working with the latest firmware, won`t reboot when it`s hot<br />
*** 8GB microSDHC Class 10 Ultra(30MB/s) (SDSDQU-008G-U46) tested and working on Raspbian wheezy (and RaspBMC)<br />
*** 16GB microSDHC Class 10 Mobile Ultra (SDSDQUA-016G-U46A) working with the latest firmware<br />
*** 32GB microSDHC Class 4 (SDSDQM-032G-B35)<br />
*** [http://img217.imageshack.us/img217/6435/dsc0255uc.jpg 64GB microSDXC Class 6 Mobile Ultra] (SDSDQY-064G-A11A) (boots up much more consistently with latest firmware)<br />
<br />
* '''Silicon Power''' <br />
** 4GB microSDHC Class 6 (SP004GBSTH006V10-SP)<br />
** 8GB microSDHC Class 10 (S608G1202)<br />
** 16GB microSDHC Class 10 (SP016GBSDH010V10)<br />
<br />
* '''Sony'''<br />
** 4GB SDHC Class 4 (SF-4B4) (Write 6MB/s, Read 20MB/s)<br />
** 4GB SDHC Class 4 (SF-4N4)<br />
** 8GB SDHC Class 4 (Write 11.8MB/s, Read 17.4MB/s)<br />
** [http://store.sony.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&partNumber=SF32NX/TQ#features 32GB SDHC Class 10 (SF-32NX/TQ)] (Max read speed of ~94MB/s, min write speed of ~10MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012) <br />
<br />
* '''Strontium'''<br />
** 8GB SDHC Class 10 (SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492))<br />
* '''Super Talent'''<br />
** 32GB Secure Digital High Capacity SDHC Card (Class 10), Model SDHC32-C10 SKU: 116-557-001 (works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian))<br />
<br />
* '''TakeMS'''<br />
** 4GB microSDHC Class 4 (with adapter) [http://www.takems.com/products.php?categ=flash&prod=Micro_SDHC-Card Micro SDHC Class 4 + 1 Adapter(Order No.88662)]<br />
<br />
* '''TDK'''<br />
** 4GB SDHC Class 4 (1008WW5261B)<br />
** 4GB SDHC Class 4 (80-56-10275-004G,Debian works '''BUT''' mmc0 errors when booting Fedora)<br />
** 4GB microSDHC Class 4 (80-56-10301-004G)<br />
** 4GB SDHC Class 6 (S404G1113) - Works with Debian Wheezy (2012-06-18 beta), not tried latest OpenELEC yet.<br />
** 8GB SDHC Class 10 - Works with Raspbian 2012-07-15<br />
** Sandisk 64GB Class 10 Ultra SDXC UHS-I FFP (3A114807)<br />
<br />
* '''Toshiba'''<br />
** 8GB mircoSDHC SD-C08GJ(BL3A<br />
** 16GB SDHC Class 10 SD-T16G (1046 US7022 C)<br />
<br />
* '''Transcend'''<br />
** 4GB SDHC Class 4 - we've found these to work without any errors and offer reasonable performance<br />
** 4GB SDHC Class 4 (TS4GSDHC4 - BH1130821915G)<br />
** 4GB SDHC Class 6 (TS4GSDHC6) - no problems. (does not work with Raspbmc as of 6/1/12)<br />
** 4GB SDHC Class 10 (TS4GSDHC10E)<br />
** [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-(SDHC)---Class-4 8GB SDHC Class 4] (TS8GSDHC4) (man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions.<br />
** 8GB SDHC Class 6 (~5.8 MB/s read/write following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (TS8GSDHC6-P2 - MMBFG08GWACA-M6)<br />
** 8GB SDHC Class 10 (TS8GSDHC10) [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-%28SDHC%29---Class-10- Transcend 8G class 10]<br />
** 16GB SDHC Class 6 (TS16GSDHC6)<br />
** 16GB SDHC Class 10 (TS16GSDHC10)(TS16GSDHC10E)<br />
** [http://www.transcend.com.es/tarjetas-de-memoria/sd-sdhc/32gb-sdhc-class-10 32GB SDHC Class 10] (TS32GSDHC10)(TS32GSDHC10E)<br />
** 64GB SDXC Class 10 (TS64GSDXC10)<br />
<br />
* '''Verbatim'''<br />
** 8GB SDHC Class 10 (43961)<br />
** 16GB SDHC Class 10 (43962)<br />
** 32GB SDHC Class 6 (44032)<br />
<br />
*'''Traveler'''<br />
**4GB High Speed Memory Card - no class mentioned. No problems. Tested with Raspbian.<br />
<br />
* '''The Pi Hut'''<br />
** Sandisk 4GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 8GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 16GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 32GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''V-Gen'''<br />
** 8GB microSDHC - no class mentioned. No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc. <br />
<br />
* '''Veho (http://www.veho-uk.com)'''<br />
** 8Gb "Ultra Fast" Class 6. (man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux.<br />
<br />
* '''W Photo (Walgreens photo)'''<br />
** 1GB SD memory card. Works with raspbmc, have not tested others.<br />
** 2GB SD memory card. Works with raspbian, not tested with others.<br />
<br />
Known good (and pre-loaded) cards will be available for sale from RS and element14 at a ''later'' date (TBA).<br />
<br />
===Problem SD Cards===<br />
<br />
Make sure that you buy your card from a reliable source. There are many cheap Chinese copies of (brand name) SD-Cards on the market, [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit/] in addition they are often mislabeled as having greater capacity than they really have. For example they might be sold as being 4GB, but are actually 2GB (or even less). <br />
<br />
There were initially issues with most Class 10 SDHC cards, apparently due to a bug in the Broadcom bootloader.[http://www.raspberrypi.org/forum/general-discussion/class-10-sd-cards-on-the-production-boards/page-3/#p39181]<br />
<br />
This seems to have been fixed in sdhci.c: [https://github.com/raspberrypi/linux/commit/7e8ae226fe6e95954df6b0dcdde40a53dbbc1a0b] Further feedback will be useful.<br />
<br />
If you add an SD card here, please also mention the kernel date and the date you tried it. This allows people to estimate how likely it is that a driver-fix in the kernel has been fixed. (i.e. I think some/most of the cards here work fine now, because a problem in the kernel driver has been fixed). <br />
<br />
* '''Acumem'''<br />
** 8GB SDHC Class 6 (many errors on 6/7/2012)<br />
* '''Adata'''<br />
** 2GB Speedy (MMAGF02GWMCA -NA)<br />
** 8GB SDHC Class 6 - Sometimes boots<br />
** 16GB SDHC Class 6 (Possibly SD5MY168G0, label with gold <> black gradient) - Doesn't boot<br />
* '''Agfa'''<br />
** 16GB MicroSDHC class 6 (as written on SD-Adapter, MicroSD card itself no-name? ENAAJK121960): mixed results, such a card was working on another RPi<br />
* '''Amazon Basics'''<br />
** 16GB SDHC Class 10 (many errors on 6/7/2012)<br />
* '''Delkin Devices'''<br />
** 4GB SDHC Class 6 "Delkin pro" -- Note: works with Fedora Beefy Miracle 17<br />
* '''GSkill'''<br />
** 32GB SDHC Class 10<br />
* '''Integral'''<br />
** 16GB SDHC Class 6 Ultima Pro (SH016GAA2BB)<br />
** 4GB SDHC class 4 (S404G1115)<br />
* '''Kingston''' <br />
** 2GB SD [http://www.geeks.com/details.asp?invtid=KING-SD-M02G-BULK looks like this] - boots the kernel, but damages the filesystem.<br />
** 4GB SDHC Class 6 - Boots kernel but won't run init (times out)<br />
** 8GB/Go SDHC Class 10 - SD10V/8GB Very slow writing images to card and then either won't boot, or boots very slowly<br />
** 16GB SDHC Class 4 (SDC4/16GB17) - Device does not recognize it <br />
* '''Memory2GO'''<br />
** 4GB SDHC Class 6 (S404G1029) - I/O Errors leading to Kernel Panic on startup.<br />
* '''Micro Center'''<br />
**4GB SDHC Class 4 — hasn't worked with any of the images I've tried; appears to be completely unrecognized<br />
* '''MyMemory.com''' <br />
** 8GB SDHC Class 10<br />
<br />
* '''Optima''' <br />
** <del>8GB SDHC Class 4 - Does not boot with Raspbian Wheezy 2012-07-15</del> - works with 2012-09-18 <br />
<br />
* '''Panasonic''' <br />
** 8GB SDHC Class 10 (RP-SDU08GD1K) mmc0: timeout waiting for hardware interrupt [http://www.mymemory.co.uk/SDHC/Panasonic/Panasonic-8GB-UHS-1-London-2012-Collection-SDHC-Card---Class-10 Panasonic 8GB Class 10]<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PS8GSDHC10-BC) - repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian<br />
** 8GB SDHC Class 10 (PSF8GSDHC10)<br />
** 8GB SDHC Class 10 (PSF8GSDHC10-PC) - won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc.). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore).<br />
* '''Platinum''' <br />
** 8GB SDHC Class 8 (O08G840 M3100487 TW)<br />
** 16GB SDHC Class 10 (article code 177117) - Does not boot with Raspbian Wheezy 2012-09-12<br />
* '''PNY'''<br />
** 8GB Optima SDHC 120 HD Class 4 SD-K08G 0928 WF3673 - mmc -110 errors at init time on 6/12/12<br />
** 8GB Premium SDHC Class 4 - mmc - mmc0: timeout waiting for hardware interrupt<br />
** 32GB SDHC Class 10 Professional (P-SDHC32G10-EF) from [http://www.play.com/Electronics/Electronics/4-/18814903/-/Product.html play.com] (mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)<br />
** 2GB card SD-M02G<br />
* '''Polaroid'''<br />
** 16GB SDHC C10 (P-SDHC16GB10-EFPOL) - mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 233x - mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic, ...<br />
* '''Reekin'''<br />
** 4Gb HighSpeed SH4GC6M16MIN9C0812TE (old) don't boot ! (11/07/2012)<br />
* '''Samsung'''<br />
** 4GB SDHC Class 4 (MB-SS4G MBSS4GMBDDBA-DD) doesn't boot with [http://downloads.raspberrypi.org/images/raspbian/2012-07-15-wheezy-raspbian/2012-07-15-wheezy-raspbian.zip 2012-07-15-wheezy-raspbian] - OK light partially lit.<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt), but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy]<br />
* '''SanDisk''' <br />
** 2GB SD Extreme III (BE0722702998D) (man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)<br />
** 2GB SD (BE0916214253D)<br />
** 2GB Ultra || 15MB/s (BE0828713280D)<br />
** 4GB SDHC Class 2 - Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt.<br />
** 4GB SDHC Class 2 "Limited Edition" (8H825413279G) - Error -110 whilst initialising sd card<br />
** 4GB SDHC Class 4 (BH1030216016G) - Doesn't boot.<br />
** 4GB SDHC Class 4 (BH1031116016G) - Doesn't boot.<br />
** 4GB SDHC Class 6 Extreme (BH0822411730D)<br />
** 4GB SDHC Class 6 Extreme III (30 MB/s) (BH0822712362G)<br />
** 4GB SDHC Class 10 Extreme (SDSDX-004G-X46) (30 MB/s HD Video) doesn't boot (also not with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta)<br />
** 4GB SDHC Class 10 Extreme (30 MB/s HD Video) (Doesn't boot) - Works with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot]<br />
** 4GB microSDHC Class 6 Mobile Ultra (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found<br />
** 8GB SDHC Class 6 Ultra (B11201421964G)<br />
** <del>8GB SDHC Class 6 Ultra (SDSDH-008G-U46 - BI1131222083D) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )</del> see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s (BI1208721965G)) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSRH-008G-A11 - Boots kernel but won't run init ( mmc timeout waiting for interrupt ) <br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSDH-008G-T11 - Boots kernel but won't run init ( debian6-19-04-2012: mmc timeout waiting for interrupt ) , but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy] on 6/22/12<br />
** 8GB SDHC Class 6 Ultra I (BI1201221964G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Extreme (BI1101116253G)<br />
** 8GB SDHC Class 10 Extreme (BI1108716254G)<br />
** 8GB SDHC Class 10 Extreme (BI1201416254G) - Still doesn't work with Debian Wheezy beta (2012-06-18)<br />
** <del>8GB SDHC Class 10 Extreme (BI1201516254G) [[http://www.amazon.co.uk/gp/product/B00422FBJ2 amazon.co.uk]]+amazon.fr</del> works with wheezy 19/09/2012<br />
** 8GB SDHC Class 10 Extreme (BI1200916252D/SDSDX-008G-X46) - Tried with Debian "Squeeze"(19/04/2012), Debian "Wheezy"(18/06/2012) and Arch Linux(13/06/2012). None works. With Debian "Wheezy" Green LED stays ON continuously, with the other two it turns on very faint.<br />
** 8GB SDHC Class 10 Extreme Pro- Works with updated kernel/firmware, stock debian6-19-04-2012 boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** <del>16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Doesn't boot with debian6-19-04-2012.img, or newer firmware (tested 2012-06-17).</del><br />
** 16GB SDHC Class 6 Ultra (BL1202021933G)<br />
** 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
* '''Silicon Power''' <br />
** 32GB SDHC Class 6 (LS2N732GQON03ASP) - boots debian6-19-04-2012.img, but frequent slow response / system hangs.<br />
<br />
* '''TDK'''<br />
** 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot] but still won't run init.<br />
** 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried (4th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github [https://github.com/raspberrypi/firmware/tree/87a04c0be0c05e20f94f223183a0310b37c9bd89/boot] but still got 'Error -84' and 'Kernel panic - not syncing: No init found'<br />
<br />
* '''Transcend'''<br />
** 2GB MicroSD (MMAGR02GUECA-MB) - reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots.<br />
** 32GB MicroSD (TS32GUSDHC4) - Doesn't boot.<br />
** 2GB SD (6451AG 2G O2DS1)<br />
** 16GB SD Class10 (TS16GSDHC10U1) - Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"<br />
* '''Veho'''<br />
** 4GB SDHC Class 6 <br />
* '''Verbatim'''<br />
** 16GB SDHC Class 6 (47178) - Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt<br />
** 8GB microSD Class 10 (44012) - ArchLinux - boots, but after system update develops segmentation faults<br />
<br />
The usual warnings against less reputable sellers (such as Ebay merchants) apply.<br />
<br />
<br />
Note that the following error is sometimes accompanied with a non-working SD card after booting (on Debian):<br />
<br />
mmc0: timeout waiting for hardware interrupt<br />
<br />
=== Benchmarks ===<br />
<br />
* http://www.sakoman.com/OMAP/microsd-card-perfomance-test-results.html<br />
* http://usbspeed.nirsoft.net/usb_drive_speed_summary.html?o=11<br />
* http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076<br />
* http://forum.xda-developers.com/showthread.php?t=1005633 (Doesn't originate from R-Pi, but very related)<br />
<br />
== Foreign Language Translations ==<br />
* [[Ru:RaspberryPiBoardVerifiedPeripherals]]<br />
<br />
== References ==<br />
<references><br />
</references><br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426https://elinux.org/index.php?title=RPi_Hardware&diff=183908RPi Hardware2012-10-23T23:35:42Z<p>Lob0426: /* Power */</p>
<hr />
<div>[[Category: RaspberryPi]]<br />
{{Template:RPi_Hardware}}<br />
<br />
<br />
==Introduction==<br />
[[File:Rpi unpopulated pcb.jpg|thumb|right|The unpopulated Rpi bèta board]]<br />
The first product is the size of a credit card, and is designed to plug into a TV or HDMI monitor. It comes in two variants, model A and B, with B having more features. The expected price is $25 for model A and $35 for model B. The [[Rpi Low-level peripherals| GPIO pins]] on each board allow the use of optional [[Rpi expansion boards|expansion boards]].<br />
<br />
Those who are looking to set up a Raspberry Pi for the first time, see [[RPi Hardware Basic Setup]].<br />
<br />
Several different Hardware versions/revisions [[RaspberryPi Boards]] have been found probably from different assembly lines. Try to identify your board for better troubleshooting and update it if you have one which is not mentioned.<br />
<br />
==Specifications==<br />
{| class="wikitable"<br />
!<br />
! Model A<br />
! Model B<br />
|-<br />
| Target price:<ref name="faq" >http://www.raspberrypi.org/faqs</ref><br />
| US$25 Ext tax (GBP £16 Exc VAT)<br />
| US$35 Ext tax (GBP £22 Exc VAT)<br />
|-<br />
| System-on-a-chip (SoC):<ref name="faq" /><br />
| colspan="2" | Broadcom BCM2835 (CPU + GPU + SDRAM)<br />
|-<br />
| CPU:<br />
| colspan="2" | 700&nbsp;MHz ARM11 ARM1176JZF-S core<br />
|-<br />
| GPU:<br />
| colspan="2" | Broadcom VideoCore IV,OpenGL ES 2.0,OpenVG 1080p30 H.264 high-profile encode/decode <br />
|-<br />
| Memory (SDRAM)iB<br />
| 256&nbsp;MiB (planned with 128&nbsp;MiB, upgraded to 256&nbsp;MiB on 29 Feb 2012)<br />
| 256&nbsp;MiB (until 15 Oct 2012); 512&nbsp;MiB (since 15 Oct 2012)<br />
|-<br />
| USB 2.0 ports:<br />
| 1(provided by the BCM2835)<br />
| 2 (via integrated USB hub)<br />
|-<br />
| Video outputs:<ref name="faq" /><br />
| colspan="2" | Composite video | Composite RCA, HDMI (not at the same time)<br />
|-<br />
| Audio outputs:<ref name="faq" /><br />
| colspan="2" | TRS connector | 3.5 mm jack, HDMI<br />
|-<br />
| Audio inputs:<br />
| colspan="2" | none, but a USB mic or sound-card could be added<br />
|-<br />
| Onboard Storage:<br />
| colspan="2" | Secure Digital|SD / MMC / SDIO card slot<br />
|-<br />
| Onboard Network:<ref name="faq" /><br />
| None<br />
| 10/100 wired Ethernet RJ45<br />
|-<br />
| Low-level peripherals:<br />
| colspan="2" | General Purpose Input/Output (GPIO) pins, Serial Peripheral Interface Bus (SPI), I²C, I²S<ref name="i2s">[http://www.raspberrypi.org/forum/features-and-requests/sad-about-removal-of-i2s-why-was-this-change-made Forum:Sad about removal of I2S. Why was this change made?]</ref>, Universal asynchronous receiver/transmitter (UART)<br />
|-<br />
| Real-time clock:<ref name="faq" /><br />
| colspan="2" | None<br />
|-<br />
| Power ratings (provisional, from alpha board):<br />
| 500&nbsp;mA, (2.5&nbsp;W) <ref name="faq" /><br />
| 700&nbsp;mA, (3.5&nbsp;W)<br />
|-<br />
| Power source:<ref name="faq" /><br />
| colspan="2" | 5&nbsp;V (DC) via Micro USB type B or GPIO header<br />
|-<br />
| Size:<br />
| colspan="2" | 85.0 x 56.0 mm (two different boards, measured with calipers)<br />
|}<br />
<br />
==Components==<br />
[[File:Raspi-Model-AB-Mono-2-699x1024.png|400px|thumb|right|A diagram denoting the places of the different components on the Rpi, made by Paul<br />
Beech, edited to show 256MB ram for both boards]]<br />
(Provisional - some of the expansion interfaces won't be available on production boards)<br />
(PCB IDs are those of the Model B Beta board) <br />
<br />
* SoC: [http://www.broadcom.com/products/BCM2835 Broadcom BCM2835 media processor] ([http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf datasheet], [[BCM2835 datasheet errata]], [[RPi_BCM2835_Pinout|unofficial pinout]]) system-on-chip featuring:<br />
** CPU core: [http://infocenter.arm.com/help/topic/com.arm.doc.ddi0301h/DDI0301H_arm1176jzfs_r0p7_trm.pdf ARM1176JZF-S] ARM11 core clocked at 700MHz; ARM VFP. The ARM11 core implements the ARMv6 Architecture. For details on ARM instruction sets and naming conventions, see [http://en.wikipedia.org/wiki/ARM_architecture ARM architecture] and [http://en.wikipedia.org/wiki/List_of_ARM_microprocessor_cores List of ARM microprocessor cores].<br />
** GPU core: a Broadcom [http://en.wikipedia.org/wiki/Videocore VideoCore] IV GPU providing OpenGL ES 1.1, OpenGL ES 2.0, hardware-accelerated OpenVG 1.1, Open EGL, OpenMAX and 1080p30 H.264 high-profile decode. There are 24 GFLOPS of general purpose compute and a bunch of texture filtering and DMA infrastructure. Eben worked on the architecture team for this and the Raspberry Pi team are looking at how they can make some of the proprietary features available to application programmers<br />
** DSP core: There is a DSP, but there isn't currently a public API (Liz thinks the BC team are keen to make one available at some point)<br />
** 256MiB of ([http://www.hynix.com/products/mobile/view.jsp?info.ramKind=28&info.serialNo=H9TKNNN2GDMPLR&posMap=MobileDDR2 Hynix MobileDDR2] or [http://www.samsung.com/global/business/semiconductor/product/mobile-dram/detail?productId=7611&iaId=747 Samsung Mobile DRAM]) SDRAM. The RAM is physically stacked on top of the Broadcom media processor ([http://en.wikipedia.org/wiki/Package_on_package package-on-package technology]). Here is a photo of the [http://www.raspberrypi.org/wp-content/uploads/2012/01/brcm2835plusmemory.jpg SDRAM (left) and BCM2835 (right)] ball grid arrays on JamesH's finger. You are looking at the bottom side. The BCM2835 top side has a land grid array which matches the SDRAM ball grid array.<br />
* LAN9512 ([http://www.smsc.com/media/Downloads_Public/Data_Briefs/9512db.pdf Data Brief] | [http://www.smsc.com/media/Downloads_Public/Data_Sheets/9512.pdf Data Sheet]) '''(Model B)''' providing:<br />
** 10/100Mb Ethernet (Auto-MDIX)<ref name=autoMDIX>[http://en.wikipedia.org/wiki/Medium_dependent_interface#Auto-MDIX Wikipedia:Auto-MDIX]</ref><br />
** 2x USB 2.0 <br />
* S1: Micro USB power jack (5v - Power Only)<br />
* S2: [http://www.mipi.org/specifications/display-interface DSI] interface. 15-pin surface mounted flat flex connector, providing two data lanes, one clock lane, 3.3V and GND.<br />
* S3: HDMI connector providing type A HDMI 1.3a out<br />
* S4: Composite Video connector: RCA<br />
* S5: MIPI [http://www.mipi.org/specifications/camera-interface CSI-2] interface. 15-pin surface mounted flat flex connector.<br />
* S6: Audio connector: 3.5mm stereo jack (output only)<br />
* S8: SD/MMC/SDIO memory card slot (underside)<br />
* S7: Either 1x USB 2.0 '''(Model A)''' 2x USB 2.0 '''(Model B)'''<br />
* P1: 26-pin 2.54 mm header expansion, providing: see [[Rpi_Low-level_peripherals | Low-level peripherals]]<br />
** 8 [[Rpi_Low-level_peripherals#General_Purpose_Input.2FOutput_.28GPIO.29|GPIO]]s at 3v3<br />
** 2-pin UART serial console, 3v3 TTL (debug); or 2 GPIOs at 3v3<br />
** I&sup2;C interface (3v3); or 2 GPIOs at 3v3<br />
** SPI interface (3v3); or 5 GPIOs at 3v3<br />
** 3v3, 5v and GND supply pins<br />
** ARM JTAG (if pins are reconfigured in software and one signal is taken from S5)<br />
** Second I&sup2;C interface (3v3) (if pins are reconfigured in software)<br />
** I&sup2;S interface (if pins are reconfigured in software, hardware hack may be required<ref name="i2s"/>)<br />
** 6 pins reserved for future use<br />
* P2: 8-pin 2.54 mm header expansion providing GPU JTAG (ARM11 pinout, pin 7 is nofit for locating)<br />
* P3: 7-pin 2.54 mm header expansion (header not fitted), providing LAN9512 JTAG (pin 6 is nofit for locating)<br />
* P4: 10/100Mb RJ45 Ethernet jack '''(Model B)'''<br />
* TP1 and TP2: Test Points giving access to +5V and GND respectively<br />
* 5 Status LEDs<ref name="PCBs">[http://www.raspberrypi.org/archives/402 RPiBlog Post: High-res pics of the PCBs]</ref><ref name="LEDs">[http://twitpic.com/8edlsf TwitPic:Photo of Board Powered]</ref><ref name="LEDsGPIO">[http://www.raspberrypi.org/forum/features-and-requests/what-do-the-status-indicator-leds-indicate-the-status-of Forum:What do the status indicator LEDs indicate the status of?]</ref><ref name="OKGreen">[[RPi_schematic_errata]]</ref><ref name="Revision2.0">[http://www.raspberrypi.org/archives/1959 RPiBlog Post: A nice shiny photo of the rev2 board – and User Guide news]</ref>:<br />
** D5(Green) - SDCard Access (via GPIO16) - labelled as "OK" on Rev1.0 boards and "ACT" on Rev2.0 boards<br />
** D6(Red) - 3.3 V Power - labelled as "PWR" on both Rev1.0 and Rev2.0 boards<br />
** D7(Green) - Full Duplex (LAN) '''(Model B)''' - labelled as "FDX" on both Rev1.0 and Rev2.0 boards<br />
** D8(Green) - Link/Activity (LAN) '''(Model B)''' - labelled as "LNK" on both Rev1.0 and Rev2.0 boards<br />
** D9(Yellow) - 10/100Mbit (LAN) '''(Model B)''' - labelled (incorrectly) as "10M" on Rev1.0 boards and "100" on Rev2.0 boards<br />
<br />
* Board size: 85.60 mm x 53.98 mm. Overall height expected to be less than 25 mm. <ref name="artwork">http://www.raspberrypi.org/archives/344</ref><br />
** A model B between highest points (USB connector to card slot) measured 21 mm.<br />
* Weight: under 40 g?<br />
** Alpha board weighs approx. 55 g.<ref>http://www.raspberrypi.org/?page_id=43&mingleforumaction=viewtopic&t=285.0</ref><br />
** A sample model B weighed 39.45 g.<br />
* 6 layer PCB <ref name="artwork" /><br />
<br />
==Schematic / Layout==<br />
<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/11/gerbers2.png PCB screenshot]<br />
* [http://lh3.googleusercontent.com/-uO4l8pwSLvU/TsQGbth6x6I/AAAAAAAAAkk/5zQMH3uKPiE/s829/Boardlayout.png PCB screenshot, labelled version]<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/07/raspberry1.png PCB screenshot, Alpha board]<br />
* [http://www.raspberrypi.org/wp-content/uploads/2011/12/psu.png Preliminary power supply schematic, Beta board]<br />
* [http://elinux.org/File:RPi-Front-JPB.jpg High-resolution PCB front photo, production board]<br />
* [http://elinux.org/File:RPi-back-JPB.jpg High-resolution PCB back photo, production board]<br />
* [http://www.andrewscheller.co.uk/bare_pcb.xcf GIMP project containing properly aligned versions of the high-res PCB photos and Gerbers on separate layers (117MB)]<br />
* [[Media:RPi beta xray.jpg|"Xray style" image of the beta board, created from the above GIMP project]] | [[RPi_xray_wallpapers|desktop wallpapers]]<br />
* [http://www.raspberrypi.org/wp-content/uploads/2012/04/Raspberry-Pi-Schematics-R1.0.pdf Official schematics PDF] | [[RPi_schematic_errata|errata]] | [[RPi_schematics_breakdown|breakdown]]<br />
* [http://www.andrewscheller.co.uk/rpi_pcb_modules.html 'Module groups' of the PCB photos]<br />
<br />
==Power==<br />
<br />
The board takes fixed 5V input, (with the 1V2 core voltage generated directly from the input using the internal switch-mode supply on the BCM2835 die). <br />
This permits adoption of the micro USB form factor, which, in turn, prevents the user from inadvertently plugging in out-of-range power inputs; that would be dangerous, since the 5V would go straight to HDMI and output USB ports, even though the problem should be mitigated by some protections applied to the input power: The board provides a polarity protection diode, a voltage clamp, and a self-resetting semiconductor fuse.<br />
<br />
Premier Farnell recommend the following power supplies:<br />
* Model A: 5V dc, 500-700mA<br />
* Model B: 5V dc, 700-1200mA<br />
<br />
Power consumption of the Raspberry Pi device is<br />
<br />
* Board A: 5V, 500 mA (2.5W) '''without any devices connected''' (e.g. USB, Ethernet, HDMI)<br />
* Board B: 5V, 700 mA (3.5W) '''without any devices connected''' (e.g. USB, Ethernet, HDMI) (Is this correct? These [http://www.raspberrypi.org/forum/troubleshooting/usb-hub-sending-power-to-raspberry-pi-through-usb-port/#p68382] links [http://www.raspberrypi.org/forum/general-discussion/raspberry-pi-power-requirements/page-2/#p68224] suggest that the 700mA is only required if "using networking and high-current USB peripherals" [http://www.raspberrypi.org/archives/260].)<br />
<br />
You will need to provide a power supply that can provide enough current to power the device plus any connected peripherals, and taking into account inefficiencies of the supply itself and the cable between the power supply and Raspberry Pi. The community advises opting for a power supply that can supply at least 1A if using USB peripherals or Pi plates that draw more than a few tens of milliamps of current.<br />
<br />
*As the 5V rail is brought out in the [[Rpi_Low-level_peripherals | GPIO pins]], you can power the Rpi from there too. You should mind however, that those are ''behind'' the power protection circuitry, so you should provide your own.<br />
* It is possible to power the Rpi from a powered USB hub the Rpi controls, but only on 'dumb' devices, that allow the port to supply the full current without waiting for the usb device to ask for it[http://www.raspberrypi.org/forum/general-discussion/power-pi-from-usb-hub-connected-to-pi]. As the power input of the Rpi doesn't have its data leads connected, there is no chance for a communication loop of some sorts.<br />
* POE ([[wikipedia:Power_over_Ethernet|power over ethernet]]) is currently not available for the Rpi (but nobody stops you from taking your soldering iron and doing it yourself - mind though that the Ethernet jack on the board is a 'magjack' - http://www.sparkfun.com/datasheets/Prototyping/MagJack.pdf - which means that the usual 'dumb or passive PoE' power pins 47 and 78 are *not* wired through to the board. So this is not an entirely trivial exercise).<br />
* Back-Powering; (powering the Raspberry Pi from a USB hub through the uplink/data port, single cable) Back powering is possible on the Raspberry Pi. Revision 1.0 boards have to be modified to back power, this is due to the 140ma "polyfuses" that are installed in the USB port circuit. Revision 1.1 boards do not need modifications to back-power, they have replaced the polyfuses with 0ohm resistors in their place. Revision 2.0 boards do not need modification, they have neither resistors nor polyfuses. It is advised that short (12" (.3 meter) or less) USB cables be used for back-powering a Raspberry Pi. Cable resistance plus connector resistance can quickly reduce operating voltages below the proper range(5.25V to 4.75V).<br />
<br />
===Power Supply Problems===<br />
<br />
There have been a number of problems reported that seem to be caused by inadequate power, this is an attempt to explain what is needed and the consequences of not having enough power.<br />
<br />
The power required by the Pi will vary depending on how busy it is and what peripherals are connected.<br />
* Running a GUI will take more power.<br />
* The USB devices and Ethernet connection will take power.<br />
* Running the GPU will take extra power.<br />
<br />
This means that it's difficult to say exactly how much power is needed. People have reported current requirements of between 300mA and 550mA. But it could in reality take more, especially for short periods. A simple multimeter will not show short surges on the power requirement. A surge in the power requirement for a few milliseconds will not be detectable by a meter but will be enough to cause problems.<br />
If the board does not get enough power the voltage will drop. If it drops enough parts of the system will run unreliably because data can get corrupted. The USB IC runs on 5V and handles the USB and Ethernet ports so it's likely that this will be the first thing to fail. Problems seen are unreliable Ethernet connection and unreliable operation of the Keyboard and/or mouse. <br />
<br />
Each of the two USB ports on the Pi has a polyfuse rated at 140 mA, so any connected USB devices should draw less than this amount of current. In addition the polyfuse will cause a significant voltage drop, so that USB devices get less voltage than is available on the RPI itself, sometimes up to half a volt less (maybe more if the fuse has recently been hot). For regular "low power" USB devices this doesn't cause a problem as they are designed to work with voltages as low as 4.4 Volt. This isn't the case however with some USB devices such as WiFi dongles which may need 4.75 Volt, and are also known to draw more than 150 mA when configured and active. Because of the problems these polyfuses caused Raspberry PI's produced after August 25, 2012 have the USB polyfuses F1 & F2 removed (replaced with shorts).<br />
<br />
The microUSB input port also has a 1.1 A polyfuse (700mA "hold current") which may also have enough resistance (although much smaller than the 140mA fuses) to cause a significant voltage drop on the board, even below its 1.1 A total current.<br />
<br />
A extended explanation of the consequences of the use of these polyfuses can be found here [[Polyfuses explained]]<br />
<br />
There are several reasons why the power to the board may be inadequate:<br />
* The PSU may not deliver enough power. Although the maximum power requirement is said to be 700mA, that is with no peripherals connected (USB, Ethernet etc), so a 1000mA PSU should be regarded as a minimum. This allows some leeway in case the power supply cannot deliver its full power without the voltage dropping.<br />
* The PSU is not regulated.<br />
* The cable connecting the PSU to the Pi may not be good. People have reported cables with 4 ohms resistance on the power connections. At 500mA drain this would reduce a 5V supply to 3V.<br />
* If the PSU is unregulated it can also output too high a voltage, which may trigger the overvoltage device in the PI, which will temporarily short the 5V to ground, this will then "blow" polyfuse F3, which will take several days to recover from. Meanwhile (possibly with another PSU) the PI might not get enough power because the (partly) blown polyfuse is consuming some of the power. The solution is when this happens to ways a few days to give the polyfuse time to recover before attempting to use the better PSU. If you suspect a blow polyfuse, measure the voltage across F3, which should be less than 0.05 Volt.<br />
<br />
====How Can I tell if the power supply is inadequate?====<br />
<br />
Common symptoms of an inadequate power supply are<br />
* Unreliable Ethernet or keyboard operation, especially if it's OK at first but not when the GUI is started.<br />
* SD card errors at start up seems to be another symptom of poor power.<br />
<br />
If you think you have a problem with your power supply, it is a good idea to check the actual voltage<br />
on the Raspberry Pi circuit board. Two test points labelled TP1 and TP2 are provided on the circuit board<br />
to facilitate voltage measurements.<br />
<br />
Use a multimeter which is set to the range 20 volts DC (or 20v =). You should see a voltage between 4.75 and 5.25 volts. Anything outside this range indicates that you have a problem with your power supply or your power cable, or the input polyfuse F3. Anything inside, but close to the limits, of this range ''may'' indicate a problem.<br />
<br />
[[File:RPI_Test_Points.JPG|400px]] [[File:Voltmeter.JPG|250px]]<br />
<br />
====Things that can cause problems====<br />
* A USB connection on a TV or PC. The USB power supply specification is for up to 500mA and if the TV implements this then it can cause problems. The system may work initially but be unreliable because as it becomes more active the power requirement increases.<br />
* A single supply from a powered hub. Most hubs seem to deliver more than the specified current but there's no guarantee. Check the power supply rating, it must be enough to supply everything that's connected to the hub.<br />
* A power supply that is rated for less than 700mA may work some of the time.<br />
* Adding a USB hard disk drive. A HDD will take quite a lot of power as it starts, maybe an amp or more. It the power supply for this also supplies the Pi then this could overload things and cause trouble.<br />
* Some complex keyboards have been reported to take a considerable amount of power, maybe up to 500mA. The Pi cannot deliver this amount of power. Simpler budget keyboards may be better. If the system works with no keyboard attached but not with a keyboard then it's worth trying a different, simpler, keyboard.<br />
<br />
====Summary====<br />
<br />
* If you are having unreliable operation the first thing to do is check your power supply.<br />
* Start with a good quality regulated power supply that is rated to provide 5V and at least 1A (1000mA).<br />
* Use a good quality micro USB cable. Cables are notorious for giving trouble so be prepared to swap for another one.<br />
* Not all power supplies will deliver what they claim.<br />
<br />
===Capacitor C6===<br />
Behind the microUSB power connector on the Model B is a metallic grey component called a capacitor, marked as C6. This capacitor helps stabilise the DC power on the board, but for some it has also become a place for their thumb when removing the RPI's power lead; unfortunately, this can result in the capacitor breaking off! It has been stated in the forums that the type of capacitor used for C6 will be changed on later RPi models for one with sturdier leads. If you do break off your C6 capacitor, it's highly likely that your RPi will still work properly, unless you have a particularly unstable power supply, but the general advice is to not use C6 as a leverage point when removing the power connector and also take care when storing or transporting your RPi if it's not fitted in a case - try not to stow the board where C6 could be knocked by other items - for example in a laptop carry case or in amongst some books.<br />
[[File:Rpic6.jpg|300px|thumb|center|Capacitor C6 (ringed)]]<br />
<br />
It's unlikely that replacing a broken off C6 capacitor will be covered under warranty, but fortunately they are easy to replace if you have average [http://www.raspberrypi.org/archives/1494 soldering skills], but remember that reworking your RPi will void its warranty too. C6 is a surface mount electrolytic capacitor with a capacitance of 220 microfarad (μF) and a voltage rating of 16 volt (V). The capacitor is polarised and so must be fitted the right way round - notice the black marking on one side in the picture above. A replacement capacitor can be purchased from numerous sources - for example:<br />
<br />
[http://uk.farnell.com/jsp/search/browse.jsp?N=202457+110114112+110119850+110141127+110200576&No=0&getResults=true&appliedparametrics=true&locale=en_UK&divisionLocale=en_UK&catalogId=&skipManufacturer=false&skipParametricAttributeId=&prevNValues=202457+110114112+110119850+110141127&mm=1000002|110114112|110114112,1001880|110119850|110119850,1002520||,1002063||,1002999||,&filtersHidden=false&appliedHidden=false&autoApply=true&originalQueryURL=%2Fjsp%2Fsearch%2Fbrowse.jsp%3FN%3D202457%26No%3D0%26getResults%3Dtrue%26appliedparametrics%3Dtrue%26locale%3Den_UK%26divisionLocale%3Den_UK%26catalogId%3D%26skipManufacturer%3Dfalse%26skipParametricAttributeId%3D%26prevNValues%3D202457 Farnell]<br />
<br />
[http://www.rapidonline.com/Electronic-Components/220uf-16v-85deg-Smd-Electro-Capacitor-11-2264 Rapid Electronics]<br />
<br />
[http://uk.rs-online.com/web/c/passives/capacitors/aluminium/?sort-by=default&sort-order=default&applied-dimensions=4294884868,%204294884170,%204294672278,4294885140&lastAttributeSelectedBlock=4294955811 RS Components]<br />
<br />
<br />
If you prefer to make your own PSU - see: [[RPi_5V_PSU_construction| Power Supply construction - HowTo]]<br />
<br />
==References==<br />
<references/><br />
<br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426https://elinux.org/index.php?title=RPi_VerifiedPeripherals&diff=180662RPi VerifiedPeripherals2012-10-14T01:56:34Z<p>Lob0426: </p>
<hr />
<div>[[Category: Linux]]<br />
[[Category: ARM Development Boards]]<br />
[[Category: Broadcom]]<br />
[[Category: Development Boards]]<br />
[[Category: RaspberryPi]]<br />
[[Category: Education]]<br />
{{Template: RPi_Hardware}}<br />
<br />
<br />
'''A note about this page: For USB devices, please specify if they required a powered hub'''<br />
==Notes==<br />
<br />
19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the [http://www.raspberrypi.org/downloads default Debian distribution] unless stated otherwise. A suggested suffix markup scheme is as follows:<br />
<br />
* (A) - Relates to model A production board<br />
* (B) - Relates to model B production board<br />
* (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different<br />
* No markup - relates to all production boards<br />
<br />
''Discuss: [http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247 http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247]''<br />
<br />
If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order.<br />
<br />
==Power Usage Notes==<br />
{{Warning|Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the RPi. If the RPi's supply voltage falls below a certain value (anecdotally stated as around 4.75V), or it begins to fluctuate, your setup may become unstable. There is a [http://elinux.org/RPi_Hardware#Power Wiki section about this issue] which is worth a read.}}<br />
<br />
'''Model B Hardware Revisions and USB Power limits'''<br />
'''Hardware Revision 1.0'''<br />
The original Model B board had current limiting polyfuses which limited the power output of each USB port to approximatly 100mA. USB devices using more than 100mA had to be connected via a powered hub. The PI's PSU was chosen with a power budget of 700mA of which 200mA were assigned to the USB ports, so the Raspberry Pi's (poly)fuses were designed only for devices up to 100mA, and typical 140mA polyfuses will have as much as 0.6 volt across them when drawing currents near the 100mA limit. As a consequence the USB ports are only directly suitable for "single current unit" USB devices which, according to USB specifications, are designed to work with just 4.4 Volt. Not only do non single current unit devices draw more current (causing greater Voltage drops, and greater stress on the fuses), they also might require 4.75 Volt to work.<br />
<br />
'''Model B Hardware Revision 2.0 and Revision 1.0 with ECN0001 change'''<br />
This had the polyfuses removed, removing the 100mA current limitation for each USB port (but leaving the main fuse F3 intact). Users should still ensure their power supply can power the RPi and the USB peripherals. Revision 2.0 was released in August 2012.<br />
<br />
==Linux Driver Issues==<br />
Shortly after the Raspberry Pi was released it was it was confirmed that there were a number of issues with the Linux USB driver for the SMSC95xx chip. These included problems with USB 1.x peripherals that use split transactions, a fixed number of channels (causing problems with Kinect) and the way the ARM processor handles the SMSC95xx interrupts. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097&start=76] [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=5249&start=44]<br />
A large number of fixes were included in the 2012-08-19-wheezy-raspbian Linux image.<br />
<br />
== Powered USB Hubs ==<br />
A number of low-cost powered USB hubs are known to have caused problems. Members of the Raspberry Pi forums have reported low power or no power at all in some cases. The following is a list of specific Powered USB Hubs which appear to be fault-free. Please note that these do not take into account powering the Raspberry Pi from the hub, in addition to its peripherals.<br />
<br />
If you use a powered hub and PI PSU together consider powering them from the same power bar with switch, so you can turn them on simultaneously., especially if the HUB tries to feed the PI through their interconnect cable, due to the 100mA limiting fuse in the PI the PI will be partially powered which may cause problems (unwanted writes to the SD card).<br />
<br />
===Working USB Hubs===<br />
*'''Acme'''<br />
** USB 2.0 hub 4 port ([http://www.acme.eu/en-us/product/019188 ACME]) Based on NEC μPD720114 USB2.0 Hub Controller USB ID 0409:005a '''NOTE!''' It is bus-powered hub, but very cheap and small and works after a small modding: on usb-hub board you have 4 holes: V, D+, D- and GND. Connect GND, D+ and D- to the RasPI, and additionally connect GND and +5v from power supply to the same holes on usb-hub GND and V. Now there is common contacts: GND, D+ and D- between RasPI and hub needed to work, and additional power for USB devices, connected to the hub. Tested on my RasPI.<br />
*'''Belkin'''<br />
** F4U040 4-Port Ultra-Slim Desktop hub (powered 5v, 2.6A, lsusb lists as Genesys Logic 05e3:0608)<br />
** F5U224 4 port powered USB hub<br />
** F5U231/F5U234 Hi-speed USB 2.0 Tertrahub - 4 port powered USB hub (verified.. able to power Raspberry Pi using micro USB directly from hub)<br />
** F5U237 7 Port powered USB 2.0 5V 3.8A (5 back port 2 top ports)<br />
** F5U259-ME USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time)<br />
** F5U403 USB 2.-0 4 Port Hub (Powered, suspect see F5U404 in non-working, didn't test power the RPi from hub.)<br />
** F5U700 USB 2.0 7-Port Hub (Powered, able to power Raspberry Pi via micro USB directly from hub)<br />
** F5U706ea/uk 2-in-1 Hub (USB 2.0, powered, 7-port)<br />
** F5U706701PerBlk 7-in-1 Hub (USB 2.0, powered 5V 2.5A , 7-port)<br />
** F4U039qukAPL 7 port Ultra-Slim Desktop Hub (internally two Genesys Logic 05e3:0608 devices - powering RPi from port furthest away from power supply. Toshiba Stor.E 1TB must be powered from ports closest to the power supply to avoid errors in dmesg. Flash drives seem fine on ports away from the power supply.)<br />
*'''Benq'''<br />
** E2220HD LCD Monitor with 4 port USB Hub. Able to power the Pi and no backfeed of power from the monitor to the Pi via the interconnect. Just works.<br />
*'''Biltema'''<br />
** 23-924 4-port powered USB 2.0 Hub (2.0A) Able to power Raspberry Pi via USB port<br />
*'''CyberPower'''<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817804002] CP-H720P 7-port powered hub with 3.6A adapter. Internally, a NEC Corp 0409:0050 device. Works perfectly with Model B, regardless of whether the RPi is being powered by the hub or externally.<br />
*'''Dell'''<br />
** Dell 2001FP monitor has 4 USB ports and acts as a powered hub.<br />
** Dell SP2309W monitor has 4 USB ports and acts as a powered hub.<br />
** Dell 2407FWP monitor has 4 USB ports and acts as a powered hub. Additionally, the 6-in-1 Card Reader part of the monitor works as well, though it will not read SDXC Cards.<br />
** Dell U3011 monitor has 4 USB ports and acts as a powered hub. Additionally, the Card Reader part of the monitor works as well, and is compatible with 128GB SDXC Lexar Brand Cards <br />
*'''DELTACO'''<br />
** [https://www.deltaco.se/products/items/itemid/(UH-715)/index.aspx UH-715 Rev 2] 7-port powered hub with 2A adapter.<br />
*'''DYNEX'''<br />
** 7port hob idVendor=0409, idProduct=0050 works<br />
*'''D-Link'''<br />
** [http://www.amazon.com/D-Link-DUB-H7-High-Speed-7-Port/dp/B00008VFAF] 7-Port USB Hub DUB-H7 (See note below - doesn't work for all, apparently). Working model marked BUBH7A....A5. Worked with Debian on production B model, for keyboard, mouse, and thumb drives, also worked with ArchLinux, didn't work with Bodhi Linux immediately thereafter. Recent model did not work with default raspbian firmware (3.1.9+ #272); updated firmware with rpi-update (to 3.2.27+ #66), now seems to work perfectly.<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817111131] 4-Port USB Hub DUB-H4 Worked on Debian with keyboard, mouse, and thumb drive. Also tested with Raspbmc and external HD (powered through USB). While the hub has a charging port, which should be able to provide power enough to the RasPi (1.2 A), connecting the RasPi here doesn't work, as it seems the power is cut during boot (At least with hub hardware rev. C1). While it does boot from any of the other ports, it shouldn't be used it doesn't provide enough power (Standard 500 mA per port. Measuring at P1-P2 on the RasPi: ~4.45 V).<br />
*'''Digicom'''<br />
** [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MiniHubUsb204P#] MiniHUB 4-Port USB 2.0 with PSU 5V - 2A .<br />
*'''Digitus'''<br />
** 7-port USB2.0 Powered Hub. Model DA-70226.<br />
*'''Eminent'''<br />
** [http://www.eminent-online.com/en/product/22/em1102-4-port-usb-hub---black.html] EM1102 4 Port USB 2.0 Hub with 1A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
** [http://www.eminent-online.com/en/product/27/7-port-usb-2-0-hub.html] EM1107 7 Port USB 2.0 Hub with 2A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
* '''GearHead'''<br />
** [http://www.amazon.com/gp/product/B004OBZ088/] GearHead 4 Port Hub with Energy Saving Power Switch (5V, 1A)<br />
*'''Gembird'''<br />
** Gembird UHS 242 4-port USB 2.0 Hub 1.8 Amps<br />
* '''Genesys Logic (sold at Fry's)'''<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0608) (Other brands include Gigaware and Belkin, same ID shows up in lsusb)<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0606) (Other brands include i-Rocks, same ID shows up in lsusb)<br />
* '''Hama'''<br />
** Hama 4-way USB 2.0 Hub<br />
*'''HP'''<br />
** HP ZR2240w 21.5" Monitor with built in 2-Port USB Hub (B)<br />
*'''Laser'''<br />
** "7 port USB hub with AC adapter Version 2.0". 5V 1A (found at Harvey Norman Australia for $24.95 and Australia Post Shops for $9.95). You can power the PI by connecting both the main USB connector to the PI USB port, '''and''' from a spare USB port back to the power micro USB socket. If you don't do both, boot-loops are likely to occur.<br />
*'''Logik'''<br />
** [http://www.currys.co.uk/gbuk/logik-lp4hub10-4-port-powered-usb-hub-04979038-pdt.html] LP4HUB10 4-Port USB Hub. '''Throws errors when used with Fedora remix 14'''<br />
** Logik L4THUB10 4 Port powered hub works fine under raspbian/wheezy/model B. Captive usb cable, 2A power supply, convenient single top mounted usb socket. Unlike my last hub, will power wifi!<br />
*'''LogiLink'''<br />
** UA0085 USB 2.0 Hub, 4-Port with PSU 5V, 2A<br />
** UA0091 USB 3.0 Hub, 4-Port with PSU 5V, 4A. Connected with USB2.0 cable. 1A per port, able to support USB HDD drives and other power hungry devices. Tested with kernel 3.1.9-cutdown, Wheezy. <br />
** UA0096 USB 2.0 Hub, 10-Port with PSU 5V, 3.5A (Not suitable for powering RPi because it doesn't work unless there is working USB input present even with PSU plugged in.)<br />
** UA0160 USB 2.0 Hub, 4-Port with PSU 5V, 2A. Able to power the RPi, keyboard, mouse and LogiLink UA0144 USB ethernet adapter. (More testing to come.)<br />
* '''Manhattan'''<br />
** [http://manhattan-products.com/en-US/products/6500-hi-speed-usb-2-0-micro-hub] (#160612) Hi-Speed USB 2.0 Micro HUB, AC Powered (identifies as ID 05e3:0608 Genesys Logic) Includes a 1000mA wall-wart (US style)<br />
*'''Newlink'''<br />
** NLUSB2-224P 4 port USB 2.0 Mini hub with PSU 5V 1A<br />
*'''Nilox'''<br />
** Nilox USB 2.0 4port HUB model HUB4USB2AC with PSU 5V 1.0A <br />
* '''Plugable'''<br />
** [http://plugable.com/products/USB2-HUB4BC/] USB2-HUB4BC 4 Port USB 2.0 Hub with BC 1.1 Fast Charging. 5V 2.5A power supply. Powering Pi via microUSB from a hub port. USB Audio peripheral tested and working.<br />
* '''Pluscom'''<br />
** Pluscom 7 Port USB 2.0 Hub Model U7PH-3A with 3Amp PSU. USB ID 1a40:0101. Powering Pi via microUSB from a hub port. Internally two 4 Port switches linked. Leaks power back up USB data cable to Pi but not really a problem when powering Pi at the same time.<br />
*'''Staples (Business Depot) (Bureau EN GROS)'''<br />
** Staples 4-port hub Item 607477-CA<br />
*'''StarTech.com'''<br />
** StarTech.com 7-port Compact USB 2.0 Hub (ST7202USB). Comes with 5v 2A supply. Shows in lsusb as two Genesys Logic, Inc. USB-2.0 4-Port HUBs (05e3:0608). Back powers Pi (Just, Voltage across TP1 & TP2 is a little low when powered from this hub).<br />
*'''SumVision'''<br />
** Sumvision Slim 4 Port High Speed USB 2.0 HUB with PSU 5V 1.0A (from [http://www.7dayshop.com/catalog/account_history_info.php?page=1&order_id=5130107 | 7dayshop ])<br />
*'''Sitecom'''<br />
** CN-032 4 Port USB 2.0 Pocket Hub. Works for powering the Pi, an USB WLAN Adapter, wireless Kbd+Mouse. Using an 2500 mA Voltcraft <br />
** CN-060 4 Port USB 2.0 Hub powered with AC Adapter (1A). Powering Pi via microUSB from a hub port.<br />
*'''Sweex'''<br />
** US014 4 Port USB 2.0 Hub<br />
*'''Targus'''<br />
** ACH81xx 7-port powered hub. 5V 3A power supply, with 2 high power ports. (possible conflicting behaviour with USB keyboard / Wifi Dongles)<br />
** ACH63EU 4-port. Using a 5V 2A power supply, which isn't supplied with the hub, it is able to power the PI as well.<br />
*'''The Pi Hut'''<br />
** 7 Port USB Hub (from [http://thepihut.com/products/7-port-usb-hub-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
*'''Trendnet'''<br />
** [http://www.trendnet.com/products/proddetail.asp?prod=130_TU2-700&cat=49] TU2-700 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2A)<br />
*'''Tripp-Lite'''<br />
** [http://www.tripplite.com/en/products/model.cfm?txtModelID=3167] U222-007-R 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2.5A) Powering RPi from Hub works<br />
*'''Ultron'''<br />
** [http://www.ultron.de/v1/produktansicht.php?artnr=67072&kid=bfa8340c4e245...&l=en&WGType=Neue+USB-HUBS] UHN-710 7-port powered hub with PSU 5V, 3A. USB ID 1a40:0201.<br />
*'''VANTEC'''<br />
** 4 Port USB 2.0 Powered Hub Model: UGT-MH304. 5V 2A AC/DC adapter. Go 2.0 Mini hub.<br />
*'''Z-TEK'''<br />
** Z-TEK 7-port powered hub with PSU 5V, 4A. USB ID 1a40:0201.<br />
*"Unknown"<br />
** 10(7-4) port hub idVendor=1a40, idProduct=0201 / idVendor=1a40, idProduct=0101 works<br />
<br />
===Problem USB Hubs===<br />
<br />
Please check known workarounds [http://elinux.org/Rpi_USB_check-list here] before adding to the list<br />
<br />
*'''Addon'''<br />
** 7-Port Powered Hub - labelled ADDUH070P - Gives constant Eth0 errors on boot.<br />
*'''Belkin'''<br />
** 7-Port Powered Mobile Hub - device labelled F4U018, packaging labelled F5U701. lsusb reveals it to be two Genesys Logic 4-port hubs based on the GL850G chipset (vendor: 0x05e3 product: 0x0608) ganged together. Yields a lot of "handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" errors and device resets in /var/log/messages. Low speed devices such as keyboards work OK, wifi/mass storage is unreliable or broken. -- No error messages with the latest kernel, but still unstable with mass storage devices. Also, leaks current back to the Pi (can be fixed by overtaping GND and +5V pinouts)<br />
** F4U022 7-Port powered USB hub (powered 5v, 2.6A), same as F4U018<br />
** 7-Port Powered Hub - device labled F5U237 Rev.3 - ID 050d:0237 Wired ethernet fails to connect; gives "DWC OTG HCD URB enqueue failed adding QTD. Error status -4008" Result is same as DUB-H7 below.<br />
** F5U404 Hi-Speed USB 2.0 4-Port Mobile Hub. Faulty/bad design; Leaks current back up the cable to the Raspberry Pi.<br />
** F5U307 Hi-Speed USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time) It work's sometimes. (Works always without powering the RPi, haven't tried that)<br />
<br />
*'''Dell'''<br />
** Dell U2410 Monitor Built-in 4 Port Hub - Shows up as a pair with 0424:2514 and 0424:2640. Standard Microsystems Corp. USB 2.0 Hub. When connecting some devices it kills the Ethernet with "smsc95xx 1-1.1:1.0: eth0: Failed to read register index 0x0000011X" errors. It did work for a keyboard and webcam. Bluetooth that works connected directly to the Pi triggers the error.<br />
<br />
*'''DELTACO'''<br />
** 7-Port USB Hub UH-713 Rev 3. This one consists also of two 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUBs connected together. The power supply is rated at 5 V 2 A. It kills ethernet when X11 is started.<br />
<br />
*'''Dynex'''<br />
** 7-Port USB Hub - Does not work in Debian 19-04 image.<br />
** DX-HB7PT 7-Port USB Hub - As per the Gear Head below, it's 2 daisy-chained Genesys Logic 05e3:0608 devices. Appears to result in significant slow downs when the USB is under load, such as running the root filesystem from a USB drive.<br />
<br />
*'''Dynamode'''<br />
** 7-Port USB 2.0 Hub (Silver and black). Feeds power back up the interconnect to the Pi causing the power LED to light on the Pi if the hub is powered on but the Pi is not. The Pi also fails to boot when powered off this hub, with or without the interconnect plugged in. Stops the network from working when connected to the Pi after booting the Pi - cannot ssh to the Pi. Best avoided. :-( Shows up in ''lsusb'' as a pair of ''ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB'' which is interesting. - Confirmed. This hub also appears unable to power an external USB drive using a y-cable as it gives the error -71 message in dmesg (when providing external power to the RPi)<br />
** 4-Port High-Speed USB 2.0 Hub (USB-H40-A2.0), came with with a 1A power supply. Leaks power to the Pi through the uplink. Doesn't work with Pi, unless the Pi is powered by a second power source. This hub is completely generic and I've seen it being sold under different brand names as well. Therefore, a picture is [http://i.imgur.com/BPZ3j.jpg included] for easy identification. <br />
<br />
*'''D-Link'''<br />
** 7-Port USB Hub DUB-H7 (Crashes USB stack, including Ethernet, when plugging / using some peripherals). (See note above, it works with some distros and/or with latest firmware)<br />
<br />
*'''E-Solution'''<br />
** 4-Port 2A Supply (Does not detect at all during boot or after boot- no messages) [IC = Alcor Micro Corp (AU6254)]<br />
<br />
*'''Fosmon'''<br />
** 7-Port USB 2.0 Hub w/ 1A Power Supply (Causes interference with other USB devices and sends enough power to light up the pi with it's Micro USB cable unplugged).<br />
<br />
*'''Gear Head'''<br />
** UH7250MAC 7-port powered hub. Internally, two daisy-chained Genesys Logic 05e3:0608 devices. Causes Ethernet instability when used under very specific circumstances, in X11.<br />
** <strike>UH5200T 4-port powered hub. As of 2012-08-16 Wheezy, if any USB 1.x device (a keyboard, for example) is plugged into this hub, Ethernet stops, and USB interrupts for other devices get dropped (keys repeating forever), etc. Occurs even if power is not attached (not a power leakage problem).</strike> Appears working after a bootloader and/or firmware update on 9/12. Also, turned out to be somewhat more specific to the combination of two particular low-speed devices.<br />
<br />
*'''Hama'''<br />
** 4-Port USB 2.0 "bus hub", model 78496 (?). Only works for low power devices (card readers?), but does not work for power hungry devices (HDD,WLAN). Doesnt boot when hub connected to RPi. The funniest thing is that RPi powers on when I plug in this hub to normal size USB port (not that small dedicated port). idVendor=05e3, idProduct=0608<br />
<br />
*'''Kensington'''<br />
** 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning keyboard, kills mouse when GUI started).<br />
<br />
*'''Inland'''<br />
** 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't, cheap unshielded untwisted wire design)<br />
<br />
*'''Logik'''<br />
** LP7HUB11 7-Port USB Hub. (Ethernet failed, slow response, in LXDE. Happened whether or not the hub's independent power supply was connected to the hub.)<br />
<br />
*'''Soniq'''<br />
** 4-Port 5V supply. Model number CUH100. (B). Appears to draw power away from the Raspberry Pi, even when the Pi has an isolated power line. Netgear WNA1100 WiFi Adapter (which is known to work in other setups is recognized, but unresponsive.<br />
<br />
*'''Targus'''<br />
** ACH115EU 7-port powered hub. 5V 3A power supply. Arduino communicates with RPi when connected directly to Pi's USB port, but it hangs soon if connected via ACH115. Also sometimes smsc95xx eth0 Failed to read register index 0x00000114 etc. errors in syslog when used.<br />
<br />
*'''TCM'''<br />
** Model 234298 s/n T634007737 powered hub. 4 ports plus card reader. 1A power supply. Model B, Wheezy raspian works ok with keyboard/mouse but problems with WiFi no connects. (insufficient power?)<br />
<br />
*'''Trust'''<br />
** 10-port USB 2.0 Hub (powered). Prevents ethernet from being recognised.<br />
** SliZe 7 port USB 2.0 Hub (powered) - Item number 17080 (Barcode 8 713439 170801). Prevents ethernet from being recognised. Keyboard sends multiple characters. <br />
<br />
*'''Unbranded / Multiple Brands'''<br />
** 7-port silver/black hub. Also sold elsewhere under brands such as 'EX-Pro', 'Trixes' and 'Xentra' -- This is ''probably'' due to an inadequate power supply. -- I replaced the terrible power supply with a very good one, kept getting "DEBUG: handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" in dmesg, with no devices plugged in to the hub (with or without the power supply in)<br />
** Generic 7-port black hub with Genesys Logic GL850A chipset<br />
** Cerulian 10 Port USB 2.0 Top Loading Hub with 2A supply (kills mouse and network port)<ref>http://www.raspberrypi.org/forum/absolute-beginners/cheap-powered-usb-hub-uk/#p76452</ref><br />
** [http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10307&cs_id=1030701&p_id=226 USB 2.0 4 PORT INT/EXT DUAL HUB BAY] -- Genesys Chipset -- idVendor=05e3, idProduct=0607 -- low speed devices worked, but strange USB failures when X session started. High speed devices such as hard drives had failures.<br />
<br />
== USB Remotes ==<br />
* ATI Remote Wonder (X10 Wireless Technology, Inc. X10 Receiver) — ID 0bc7:0004 — appears as a joystick-like 2 button mouse and a 0-9 keypad without drivers on console and X.<br />
<br />
* [http://www.amazon.com/gp/product/B005DKZTMG/ref=oh_details_o02_s00_i00 Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad (920-003070)] - keyboard and touchpad work. Have not verified multi-touch features.<br />
<br />
* [http://www.ipazzport.com/02A.html iPazzport] mini 2.4 GHz wireless keyboard and touchpad. <br />
<br />
* [http://www.ortek.com/html/pdt_view.asp?area=46&cat=152&sn=76 PKB 1800] Wireless Smart Pad ad Mini Keyboard. Pad works as mouse but not multi touch features. Keyboard works.<br />
<br />
* [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] '''Rii''' Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]. Working perfectly, just plug & play.<br />
<br />
* [https://www.google.com/search?q=tranksung+TS-Y150 Tranksung TS-Y150] USB RF Keyboard and air mouse (B)<br />
<br />
* [http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6753651&CatId=3680# Exo Ultra U12-41310 Mini Keyboard] Bluetooth Adapter, Touchpad, Laser Pointer, Presentation & Multimedia Controls work perfectly but need a little love and config for make it work.[https://github.com/thunderbirdtr/rs-pi-exo-keyboard Exo Installer script]<br />
<br />
== USB Keyboards ==<br />
USB keyboards that present themselves as a standard HID (Human Interface Device) device should work. '''Please be aware that some of these keyboards were probably used with a powered hub'''<br />
=== Working USB Keyboards ===<br />
The following is a list of specific keyboards known to work and which appear to work fault-free.<br />
<br />
* '''A4 Tech'''<br />
** Model KL-5 USB Keyboard, 20mA.<br />
<br />
* '''ABS'''<br />
** M1 Heavy Duty Professional Gaming Mechanical Keyboard (B)<br />
<br />
* '''Action Star'''<br />
** ACK-5010U Mini Keyboard And Mouse<br />
<br />
* '''Accuratus'''<br />
** KYB-Toughball-HI<br />
<br />
* '''Acer'''<br />
** KG-0917 Wireless Keyboard And Mouse Bundle (B)<br />
** KU-0906 Compact Keyboard (B) (Also known as Genius LuxeMate i200 Keyboard)<br />
** SK-9625 Multimedia Keyboard (B) (multimedia functions not tested)<br />
<br />
* '''Adesso'''<br />
** [http://ergoprise.com/product_images/j/699/ADP-PU21_big__14173_zoom.jpg PS/2 to USB Adapter] ADP-PU21, 100mA (tested only with keyboards) Any PS/2 keyboard will work only if it will work with a reduced operating voltage.<br />
** Model AKB-410UB. Keyboard with Touchpad.<br />
<br />
* '''Apple''' (Apple keyboards that have USB ports require an external powered hub to work, and do not work on the PI directly!)<br />
** [http://upload.wikimedia.org/wikipedia/commons/thumb/e/ea/Apple_iMac_Keyboard_A1243.png/800px-Apple_iMac_Keyboard_A1243.png Apple Keyboard with Numeric Keypad (aluminium/wired) A1243]<br />
** [http://upload.wikimedia.org/wikipedia/commons/8/81/Apple_Keyboard_A1242.jpg Apple Keyboard (aluminium/wired) A1242]<br />
<br />
* '''Asda'''<br />
** Basic Wired Keyboard HK2026 (B)<br />
** Basic Wired Keyboard HK3014<br />
*** (Please note when I put this keyboard through Newlink USB hub, it didn't work as expected)<br />
** Premium Wireless Keyboard (white keys, silver back) HK8028<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''Asus'''<br />
** KS-631U (comes with Asus Vento KM-63 keyboard/mouse set, not using powered hub) (B)<br />
<br />
* '''BTC - Behavior Tech Computer Corp.'''<br />
** Wired Portable Keyboard Model 6100 US (86+9 keys)<br />
*** Works with or without a powered hub<br />
** Wireless Multimedia Keyboard with build in pointer/mouse Model 9029URF III (86+17 keys) (B)<br />
** [http://www.btc.com.tw/english/2-7-07keyboard.htm Wired Multimedia keyboard 6311U/6310U] - rated at 5V/100mA, works directly<br />
<br />
* '''Bush'''<br />
** Wired Slimline Keyboard KU-0833<br />
*** This does not require a USB hub in order to work with the Raspberry Pi<br />
*** In the UK, it is available from Argos for £9.99<br />
<br />
* '''Cerulian''' <br />
** Mini wireless keyboard and mouse deskset (B)<br />
<br />
* '''CD Training''' <br />
** [http://www.cd-training.fr/?&feed=product&product_id=308 Wireless Combo Keyboard and Mouse (SolClavGlos)]<br />
<br />
* '''Cherry'''<br />
** CyMotion Master Linux (B)<br />
** RS 6000 USB ON<br />
** G84-4100PTMUS (B) (Compact keyboard. Rated 100mA. Works directly in Pi)<br />
<br />
* '''Compaq'''<br />
** Compaq Internet Keyboard KU-9978 (049f:000e). Rated 5v 100mA. Works directly connected to Pi<br />
<br />
* '''Das Keyboard'''<br />
** Model S Professional Keyboard (Built in USB hub not tested) (B)<br />
** Model S Ultimate Keyboard (Built in USB hub working) (B)<br />
<br />
* '''Dell'''<br />
** SK-8115 (B) (Rated 100mA. Works directly in pi)<br />
** L100 (B)<br />
** RT7D50 (75mA) (run "sudo dpkg-reconfigure keyboard-configuration")<br />
** KB1421 (100mA)<br />
** KB2521 (100mA)<br />
** 1HF2Y (Works directly in pi)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Delux'''<br />
** K8050<br />
<br />
* '''Digicom'''<br />
** WKEYPE01 Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
* '''Dynex'''<br />
** DX_-WKBD (60ma) (B)<br />
** DX_-WKBDSL (Hot keys not yet tested with Debian) (tested through non-powered 3 dongle usb hub) (B)<br />
<br />
* '''EAPPLY'''<br />
** EBO-013 Wireless 2.4GHz compact keyboard with touchpad. Rated <40mA works directly from Pi. eBay ref 260962010276 from Shenzen, China.<br />
<br />
* '''Emprex'''<br />
** Wireless Media Control Keyboard With Trackball 9039ARF III (Media functions untested)<br />
<br />
* '''Fujitsu Siemens''' <br />
** KB SC USB UK (!)<br />
** KB910 USB, with led light on the highest level (B)<br />
** KB400 USB US<br />
<br />
* '''GE''' <br />
** 98139 Rev.K1 (Power Keyboard) (lsusb shows it as "0b38:0010 Gear Head 107-Key Keyboard") - works without a hub (i.e. directly connected) (B)<br />
<br />
* '''Gear Head''' <br />
** KB3700TP (USB Mini Smart Touch Touchpad Keyboard) (B)<br />
** KB3800TP (Wireless Touch Mini Touchpad Keyboard with Smart Touch) (B)<br />
*** Works when plugged directly into Raspberry Pi, did not work with powered hub (could be a hub issue)<br />
** KB3800TPW (Windows Smart Touch Wireless Keyboard with Touchpad) (B)RASPBMC supported<br />
** KB4950TPW (Wireless Touch II Touchpad Keyboard) (B)<br />
** KB1500U (USB Mini Keyboard) (B)<br />
** KB5150 (2.4Ghz wireless keyboard/mouse Combo) (B)<br />
*** Works well with a powered hub<br />
<br />
* '''Genius'''<br />
** Ergomedia 700 (GK-04008/C) used without Hub<br />
** KB-06XE (K639) (B)<br />
** Slimstar 8000 wireless keyboard<br />
<br />
* '''HP'''<br />
** KG-1061<br />
** KG-0851 Wireless Keyboard and Mouse<br />
** KU-0316 (B)<br />
** LV290AA#ABA Wireless Keyboard and Mouse<br />
** PR1101U (available from Sainsbury's in the UK, £8, July 2012)<br />
** SK-2880<br />
<br />
* '''Hyundai'''<br />
** HY-K201<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Imation''' <br />
** KBD-702 Multi-media Wired Keyboard<br />
*** (works after the firmware update via [https://github.com/Hexxeh/rpi-update rpi-update] as of 06/27/2012)<br />
<br />
* '''IOGEAR'''<br />
** IOGEAR GKM561R Wireless HTPC Multimedia Keyboard with Trackball<br />
** IOGEAR GKM681R 2.4GHz Wireless Compact Keyboard with Optical Trackball and Scroll Wheel<br />
<br />
* '''iPazzPort'''<br />
<br />
* '''i.t.works'''<br />
** KC04 (direct and by usb hub)<br />
** KC Silicone (only tested directly)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''KeySonic'''<br />
** ACK-540RF (Wireless USB keyboard with built-in trackpad); works fine on Debian Squeeze plugged directly into Pi. Also works with Raspbmc with powered hub.<br />
** ACK-540RF+ (UK) WiFi keyboard inc touchpad with USB wifi dongle works fb with on model B/raspian/wheezy via powered hub<br />
** ACK-3700C<br />
** ACK-340U+(DE)<br />
** ACK-3400U (UK) mini keyboard<br />
<br />
* '''Labtec'''<br />
** [http://www.labtec.com/index.cfm/gear/details/EUR/EN,crid=28,contentid=692| Ultra-flat Keyboard]<br />
<br />
* '''Laptopmate'''<br />
** AK-98UNTN7-UBRII Laptopmate RII Touch N7 Mini Wireless Keyboard with touchpad<br />
<br />
* '''LC-Power<br />
** K1000BMW (lsusb: ID 1241:f767 Belkin; dmesg: HOLTEK Wireless 2.4GHz Trackball Keyboard) tested with Debian 6.0.4<br />
<br />
* '''Lenovo'''<br />
** SK-8825 UK (B)<br />
** Lenovo Enhanced Multimedia Remote with backlit keyboard N5902 (US)<br />
** Lenovo Mini Wireless Keyboard N5901 (US)<br />
<br />
* '''Lindy'''<br />
** 21840 (Wireless RF 2.4GHz Micro Keyboard with built-in optical touchpad/trackpad, USB); works fine on model B/raspian/wheezy - the supplied Lindy USB nano dongle transceiver plugged directly into Pi USB port.<br />
<br />
* '''Logik'''<br />
** Ultra slim keyboard LKBWSL11 (B) >> '''This is also listed under Problem USB Keyboards?'''<br />
<br />
* '''Logitech'''<br />
** Comfort Wave 450, labeled 100mA (M/N Y-U0001, P/N 820-001725, PID SC951C40001)<br />
** diNovo Mini wireless keyboard with media controls and clickpad 920-000586 (B)<br />
** diNovo Edge Keyboard, Windows edition, built-in TouchDisc track-pad, bluetooth w/ USB mini-receiver 967685-0403 (B)<br />
** Wii wireless keyboard KG-0802 (!)<br />
** C-BG17-Dual Wireless keyboard and mouse with wired USB receiver (B)<br />
** Deluxe 250 Keyboard<br />
** Internet 350 (M/N 967740-0403)<br />
** Internet Navigator Keyboard<br />
** MK120 wired keyboard and mouse<br />
** MK220 wireless keyboard and mouse<br />
** MK250 wireless keyboard and mouse (no hub needed)<br />
** MK260 wireless keyboard and mouse<br />
** MK300 wireless keyboard and mouse<br />
** MK320 wireless keyboard and mouse [http://www.amazon.co.uk/Logitech-920-002885-MK320-Wireless-Desktop/dp/B003STDQYW/ref=sr_1_3?ie=UTF8&qid=1339166178&sr=8-3]<br />
** MK350 wireless keyboard (using Unifying receiver)<br />
** MK520 wireless keyboard and mouse<br />
** MK550 wireless keyboard and mouse (B)<br />
** MX5000 Bluetooth keyboard and mouse (B) The Logitech Bluetooth dongle also does proprietary wireless so it works without Bluetooth drivers.<br />
** EX100 Cordless Desktop, Wireless Keyboard and Mouse (B)<br />
** EX110 Cordless Desktop, wireless keyboard and mouse (B)<br />
** K120 Keyboard (B)<br />
** K200 Keyboard (B)<br />
** K230 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K340 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K350 Wireless Keyboard (B)<br />
** K400 wireless keyboard with touchpad - also listed under "problematic". works for weeks with openelec and raspbian without any problems.<br />
** K520 Keyboard (B)<br />
** K700 Wireless Keyboard with Touchpad and unifying receiver<br />
** K750 Wireless Solar Keyboard (B) (Mac version works too. (B) )<br />
** LX 710 - works fine with receiver plugged directly into the RPi (accompanying mouse works fine too).<br />
** S510 wireless keyboard and mouse (B)<br />
** Ultra-Flat Keyboard (M/N Y-BP62A P/N 820-000245 PID SY126UK)labelled 100 mA. OK direct into Model B RPi.<br />
** G19 Gaming Keyboard, works fine with no external power. Illumination with external power. Powered hum in back of keyboard works too.<br />
** G15 Gaming keyboard, as long as you press the backlight button twice to turn off the backlight (it says below it dosen't work with backlight on.<br />
** V470 Bluetooth Laser Mouse<br />
<br />
''Keyboards and mice also together with Unifying receiver'' <br />
<br />
* '''Microsoft''' <br />
**Microsoft Comfort Curve Keyboard 2000<br />
**Microsoft Comfort Curve Keyboard 3000 for Business<br />
**Microsoft Digital Media Pro Keyboard Model : 1031 (Debian 13-Apr-2012)<br />
**Microsoft Natural Ergonomic Keyboard 4000 (B) (Debian "Wheezy" beta 18-June-2012)<br />
**Microsoft Wired Keyboard 600 Model 1366 (Debian 28-May-2012 on Production Model B)<br />
**Microsoft Wireless Desktop 700 Keyboard v2.0 (Raspbian Pisces image 08-June-2012 on Production Model B)<br />
**Microsoft Wireless Photo Keyboard (Model 1027) Unifying receiver, no hub<br />
**Microsoft Wireless Natural Multimedia Keyboard (Raspbian Pisces 08-July-2012) (B)<br />
**Microsoft Windows 2000 Keyboard (KB-USBK110610)<br />
**[https://www.microsoft.com/hardware/en-us/p/wired-keyboard-600/ANB-00001 Microsoft Wired Keyboard 600]. The keyboard is rated at 5v/100mA (Wheezy 5-Sept-2012)<br />
<br />
* '''Mikomi''' <br />
** Wireless Deskset KM80545 Keyboard and mouse (Works but range is terrible less than a metre) (B)<br />
<br />
* '''Monoprice'''<br />
** [http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10404&cs_id=1040401&p_id=6854&seq=1&format=2|Monoprice PS/2 To USB Adapter] Directly and through an unpowered hub with a USB mouse plugged in.<br />
<br />
* '''Motorola'''<br />
<br />
** Bluetooth wireless ultra slim keyboard and mouse combo (sold as for the "Atrix" phone) work in combination with the Technika Bluetooth adaptor listed below<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/desktopkits/nov-wcombo.html|Novatech Wireless Combo - Keyboard & Mouse, Nano adapter] (B)<br />
<br />
* '''ONN'''<br />
**ONN Keyboard Stock No: ONA11HO089 (from Walmart). Seems to work fine, even without a hub.<br />
**ONN Keyboard Stock No: ONA11HO087 (from Walmart). Combination keyboard and mouse package with nano receiver. Be sure to configure keyboard layout.<br />
<br />
* '''Perixx''' <br />
**Periboard 716 Wireless Ultra-Slim Keyboard with Touchpad (Debian 07-Jun-2012 on Production Model B)<br />
** PERIBOARD-502 wired keyboard inc built in touchpad (model B/raspian wheezy)<br />
** Periduo-707 Plus (Wireless Keyboard and Mouse) works fine ''most'' of the time. Does suffer from dropouts and glitches though. Usual "drawing too much power from USB" problems show up as well - dropped key presses or constant autorepeats. These can be cured by pulling out and reinserting the dongle in the USB socket. The keyboard sometimes hangs after power on when used with my laptop - it seems to need 30 seconds of non-use before it works fine. Again, remove and insert the dongle cures it. Works fine vi my Benq monitor's USB Hub.<br />
<br />
* '''Philips''' <br />
**Wired Multimedia Keyboard SPK3700BC/97 (Debian 19-Apr-2012 on Production Model B)<br />
<br />
* '''Prodige'''<br />
**Nanox Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01]<br />
<br />
* '''Rapoo'''<br />
**Rapoo E9080 Wireless Ultra-Slim Keyboard with Touchpad<br />
**Rapoo Wireless Multi-media Touchpad Keyboard E2700 [http://www.rapoo.com/showdetails.aspx?P_No=E2700]<br />
**Rapoo Ultra-Slim Wireless Multimedia Keyboard and Mouse E9060 (works proper on powered USB Hub)<br />
<br />
*'''Riitek'''<br />
**RT-MWK03 mini wireless keyboard & trackpad<br />
**RT-MWK02+ mini bluetooth keyboard & trackpad. Followed instructions from this page: [http://www.ctheroux.com/2012/08/a-step-by-step-guide-to-setup-a-bluetooth-keyboard-and-mouse-on-the-raspberry-pi/] and it worked, connection persists across reboots, no problem with either builtin USB or powered USB hub.<br />
**RT-MWK01 mini wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
*'''Rosewill'''<br />
** RK-200 Standard Keyboard<br />
<br />
*'''Saitek'''<br />
** Eclipse II Backlit Keyboard PK02AU (B)<br />
** Eclipse Backlit Keyboard PZ30AV (B)<br />
** Expression Keyboard (US) <br />
** Cyborg V.5 (B)<br />
<br />
*'''SelecLine'''<br />
** WK11P & WM11P-SP-PP. Keyboard and mouse set. (B)<br />
<br />
*'''SIIG'''<br />
** SIIG Wireless Multi-Touchpad Mini Keyboard 02-1286A v1.0 (B)<br />
<br />
*'''Silvercrest'''<br />
** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B) <br />
<br />
*'''SolidTek'''<br />
** Solid Tek KB-P3100BU ASK-3100U. <br />
<br />
*'''Sony'''<br />
** Keyboard for PlayStation 2 (PS2) Linux. Works without powered hub with 5v1A supply, requires manual keyboard remapping with Debian Squeeze to USA 101-key layout.<br />
<br />
* '''SteelSeries'''<br />
** Merc keyboard (B)<br />
<br />
* '''Sun Microsystems'''<br />
** Model: Type 7, SUN PN: 320-1348-02 (Danish key layout)<br />
** Model: Type 6, SUN PN: 320-1279-01 (Danish key layout)<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/keyboards/KB060UK/ KB060UK] Wired Multimedia Keyboard<br />
<br />
* '''Technika'''<br />
** WKEY03 (B)<br />
** TKD-211<br />
<br />
* '''Tesco'''<br />
** Value Keyboard VK109 (B)<br />
** Multimedia K211 Wired Keyboard (B)<br />
<br />
*'''The Pi Hut'''<br />
** Super Slim Apple Style Keyboard (from [http://thepihut.com/products/usb-keyboard-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Apple Style Keyboard Set (Keyboard & Mouse) (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust 17916 Compact Wireless Entertainment Keyboard http://www.trust.com/products/product.aspx?artnr=17916 (B)<br />
** Trust ClassicLine Keyboard http://trust.com/17184 <br />
** Trust Camiva MultiMedia Keyboard http://trust.com/products/product.aspx?artnr=16087<br />
** Trust Convex Keyboard http://trust.com/products/product.aspx?artnr=17603 tested debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
<br />
* '''Unbranded'''<br />
** AK-601 Wireless Mini Keyboard and Trackball (with laser pointer) - sourced from eBay Chinese seller<br />
<br />
* '''Unicomp'''<br />
** USB Endurapro - keyboard and trackpoint work perfectly from powered hub<br />
<br />
* '''Q-Connect'''<br />
** AK-808 (B)<br />
<br />
* '''Xenta'''<br />
** 2.4GHz Wireless Multimedia Entertainment Keyboard with Touchpad (B)<br />
** Mini Multimedia Keyboard (Model no.: 808M) (B)<br />
<br />
===Problem USB Keyboards===<br />
<br />
Note that generally PS/2 keyboards with an USB adapter will not work directly on a PI port, due to the fact that PS/2 keyboards are designed for normal 5V +-5% range, while USB keyboards must be designed to work with 4.4 Volt, and generally USB devices on the PI may receive less than 4.75 Volt. PS/2 + USB adapter keyboards might work behind a powered hub, which does provide the full 5.0V. Some of these keyboards work when running the latest raspbian but not when using the overclocked xbmc version of raspbmc, probably due to the overclocking drawing more voltage away from the rest of the support system devices.<br />
<br />
* '''A4 Tech'''<br />
** Model GL-6 USB Keyboard, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''Accuratus'''<br />
** Accuratus KYBAC100-101USBBLK causes kernel panic (rated 100mA). Tested with 1000mA cheap unbranded and Nokia 1200mA power adaptors.<br />
* '''Apple'''<br />
** [http://www.powerbookmedic.com/xcart1/images/D/apple-keyboard.jpg Apple Keyboard (109 keys) A1048]. Draws too much power and does not seem to work properly when plugged into a powered hub. <br />
*'''Argos'''<br />
** Argos Value Wired Keyboard causes kernel panic<br />
* '''Choidy'''<br />
** Identifiers from usb-devices: Vendor=1a2c ProdID=0002 Rev=01.10 Product=USB Keykoard (yes, 'Keykoard') causes kernel panic<br />
* '''Cit''' <br />
** KB-1807UB Causes kernel panic (Rated <200ma)<br />
* '''Dell'''<br />
** SK-8135 (B) (Rated 1.5A. Takes too much power from pi even when not used as USB hub. Symptom = repeated keystrokes)<br />
** SK-8115 causes kernel panic (rated 100mA) Debian 6-19-04-2012 (B)<br />
** Y-U0003-DEL5 Sticky / Non-responsive keys<br />
* '''Gear Head'''<br />
** KB2300U - Causes kernel panic (B)<br />
* '''GMYLE'''<br />
** Wired USB Slim Chocolate Multimedia Media Typing Keyboard With 3 USB Port hub (B) - Kernel Panic on startup if plugged in. If plugged in at login prompt then freeze. [http://www.amazon.co.uk/gp/product/B0067EC3GW/]<br />
* '''Inland''' <br />
** Inland USB Keyboard Model #70010<br />
* '''Jeway'''<br />
** JK-8170 "The Hunter" - causes kernel oops (Debian6-19-04-2012) (B)<br />
* '''Labtec'''<br />
** ultra-flat wireless desktop USB - Keyboard has 'sticky' keys. Tested both debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
* '''Logik'''<br />
** Wired Multimedia Keyboard Model: LKBWMM11 - causes kernel panic (on Debian 190412 distro) (B)<br />
** Wired Ultra Slim Keyboard Model: LKBWSL11 - causes USB power issues. Not reliable. Causes other USB devices to fail (B) >> '''This is also listed under Working USB Keyboards??'''<br />
* '''Logitech'''<br />
** Logitech Illuminated Keyboard (unstable; not working with led light on; tested both US and NO layouts with both Apple iPad 2 and Asus TF-101 USB chargers)<br />
** G110 Gaming Keyboard - only works with illumination off, otherwise unresponsive. Once failed it needs reconnecting before another attempt. (B)<br />
** G15 Gaming Keyboard - LCD and key backlights flicker, 95% unresponsive to typing. I don't know of a way to turn the illumination off. (B)<br />
** K360 Wireless Keyboard - Occasional sticky keys. (B)<br />
** K400 wireless keyboard with touchpad (completely non-functional on debian6-19-04-2012)<br />
** G510 Gaming Keyboard - lagging or unresponsive keys.<br />
** MX5500 wireless keyboard and mouse with usb bluetooth reciever - Unstable, looses connection without prior notice<br />
** EX100 Cordless Desktop, wireless keyboard and mouse. Mouse and keyboard hangs every few minutes (with or without hub).<br />
* '''Microsoft''' <br />
** Wireless Desktop 800 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Entertainment Keyboard - No key input recognized (possibly connectivity issue as pairing devices does not seem to work)<br />
** Wireless Optical Desktop 1000 - Keyboard has 'sticky' keys (B)<br />
** Wireless Keyboard 2000 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Desktop 3000 - Keyboard has 'sticky' keys.<br />
** Arc wireless - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X4 - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X6 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Comfort Keyboard 5000 - Keyboard has 'sticky' keys. (B)<br />
** Razer Reclusa - Keyboard has 'sticky' keys. (B rev 2.0)<br />
* '''Novatech'''<br />
** NOV-KEY2 - Causes kernel panic (B)<ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
* '''PC World Essentials'''<br />
** PKBW11 Wired Keyboard - no power to keyboard, no error messages on both Arch 29-04-2012 and Debian6-19-04-2012, same Pi works with Asda keyboard. Me too, but caused a kernel panic -- tested on powered hub and direct.<br />
* '''Razer'''<br />
** Razer Tarantula gaming keyboard - sticky keys, could be power issue as is programmable with host powered USB hub and audio jacks.<br />
** Razer BlackWidow - Sticky keys, could be a power related issue due to illuminated logo (Blue LED).<br />
* '''SIIG'''<br />
** Wireless Ultra Slim Multimedia Mini Keyboard JK-WR0612-S1 - Unresponsive and sticky keys.<br />
* '''Texet'''<br />
** MB-768B standard keyboard (Rated 5V 1.5A(!), so probably too much power drain. Kernel panic, Debian6-19-04-2012)<br />
* '''Trust''' <br />
** TRUST GXT 18 Gaming Keyboard - No power to keyboard, could be a driver issue - no error messages.<br />
* '''Unbranded'''<br />
** Compuparts<br />
** model no. HK-6106 (B) <ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
** LK-890 (Multimedia keyboard & Optical Mouse) - kernel panic on Debian Squeeze, ArchLinux and Qtonpi.<br />
* '''Verbatim'''<br />
** [http://www.amazon.com/gp/product/B004LB5AKY/ref=oh_details_o00_s00_i02|Verbatim 97472 Mini Wireless Slim Keyboard and Mouse] - Keyboard has lagging, unresponsive and sticky keys issues. (Tested with and without powered USB hub.)<br />
* '''Wilkinsons / TEXET'''<br />
** Model MB-768B causes kernel panic on debian6-19-04-2012.<br />
* '''Xenta'''<br />
** HK-6106 - causes kernel panic (on Debian 190412 distro)(B)<br />
** Multimedia Wireless Keyboard and Mouse Set (Keyboard Model: HK3518B + Mouse Model HM3301) (B) - occasional sticky keys, and occasional complete lock-up<br />
<br />
== USB Mouse devices ==<br />
USB mouse devices that present themselves as a standard HID (Human Interface Device) device should work, however some hardware requires special drivers or additional software, usually only compatible with Windows operating systems. <br />
<br />
===Working USB Mouse Devices===<br />
The following is a list of specific mouse devices known to work and which appear to be fault-free.<br />
<br />
* '''A4Tech'''<br />
** OP-530NU Padless Wired Mouse<br />
<br />
* '''Asda'''<br />
** HM5058 (Smart Price) Wired Mouse<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''ASUS'''<br />
** MS-511U (comes with Asus Vento KM-63 keyboard/mouse combo) (B)<br />
** MG-0919 (wireless)<br />
<br />
* '''Belkin'''<br />
**F8E882-OPT (B)<br />
<br />
* '''Dell'''<br />
** M-UVDEL1 (B)<br />
** M056U0A (B)<br />
** DZL-MS111-L (B) (100mA)<br />
** MS-111P (100mA)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Dynex'''<br />
** DX-WMSE (100mA) (B)<br />
<br />
* '''Fellowes'''<br />
** 99928 USB Micro Track Ball (works without a hub, directly plugged in) (B)<br />
<br />
* '''Filand'''<br />
** OP-102i Mini Optical Mouse<br />
<br />
* '''Genius'''<br />
** GM-04003A (B)<br />
** Slimstar 8000 wireless mouse (Can be intermitent. Mouse pointer sometimes is irratic.)<br />
** Traveler 515 Laser<br />
<br />
* '''HP'''<br />
** MN-UAE96 (The basic stock HP wired mouse)(B)<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''Kensington'''<br />
** Kensington Expert Mouse Trackball K64325<br />
** Kensington Expert Mouse "Slimblade" K72327US<br />
<br />
* '''Labtec'''<br />
** Corded Laser Glow Mouse 1600, rated 5V 100mA (P/N 810-000819, M/N M-UAZ149, PID GT83401)<br />
<br />
* '''Lenovo'''<br />
** Wired Optical Mouse Model: MO28UOL<br />
<br />
* '''Logik'''<br />
** Wired Optical Glow Mouse Model: LGGMO10. (B)<br />
<br />
* '''Logitech'''<br />
** B105 Mouse for Laptops (OEM)<br />
** Cordless Pilot Optical Mouse M/N M-RR95 with Cordless Mouse Receiver M/N C-BA4-MSE<br />
** G5 Logitech Gaming Mouse (B)<br />
** G5v2 Logitech Gaming Mouse (B)<br />
** G500 Logitech Gaming Mouse (B)<br />
** G700 Logitech Wireless Gaming Mouse (B)<br />
** LX-700 Cordless Desktop Receiver (B)<br />
** LX 710 Wireless Mouse - works fine with receiver plugged directly into RPi (accompanying keyboard works fine too).<br />
** M90 optical mouse<br />
** M185 Wireless Mouse (B)<br />
** M210 (part of the MK260 set) (B)<br />
** M305 Wireless Mouse<br />
** M310 Cordless Mouse<br />
** M325 Wireless Mouse<br />
** M505 USB wireless laser, model no: 910-001324 (B)<br />
** M510 Wireless Mouse (B)<br />
** M705 Marathon Mouse (Unifying receiver, no powered hub) (B)<br />
** M-BD58 Wheel Mouse (B)<br />
** M-BJ58/M-BJ69 Optical Wheel Mouse (B)<br />
** M-BJ79 (B)<br />
** M-BT96a Optical Mouse<br />
** MX320/MX400 laser mouse (B)<br />
** MX518 Optical wheel mouse (B)<br />
** Optical USB Mouse (M/N 931643-0403)<br />
** Performance Mouse MX (B)<br />
** MX Revolution (B) (Debian "Wheezy" beta 18-June-2012)<br />
** VX Nano Cordless Laser Mouse for Notebooks<br />
** Wheel Mouse (M/N BJ58)<br />
<br />
* '''Medion'''<br />
** Mini mouse Model M101-CBJ P/N 40016632 S/N 7BFSA00003445 rated 5v 100ms Works fb on model B with raspian wheezy<br />
<br />
* '''Microsoft''' <br />
** Comfort Curve Mouse 3000 for Business<br />
** Comfort Mouse 6000 (works when directly connected to Pi (B). Does not work when connected through USB Hub (mouse pointer intermittent).<br />
** Compact optical mouse 500 V2.0 (B)<br />
** Wheel Optical Mouse (wheel and additional buttons not tested) (B)<br />
** Microsoft Intellimouse Optical Mouse<br />
** Microsoft Wireless Laser Mouse 8000<br />
** Microsoft Wireless Mobile Mouse 1000<br />
** Microsoft Wireless Mobile Mouse 3500<br />
** Microsoft Wireless Mobile Mouse 4000<br />
** Microsoft Wireless Mouse 700 v2.0<br />
** Microsoft Comfort Mouse 4500<br />
** Wireless IntelliMouse Explorer 2.0 (unifying receiver, no hub)<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-mouser.html|Novatech M1 USB Mouse - Wired](B)<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-dl10.html|Novatech DL10 Wireless Mouse] (B)<br />
<br />
* '''Razer'''<br />
** Boomslang Collectors Edition 2007 (B)<br />
<br />
* '''Rosewill'''<br />
** Rosewill RM-C2U<br />
<br />
* '''Saitek'''<br />
** Notebook Optical Mouse (PM46)<br />
<br />
* '''Samsung'''<br />
** Samsung model:AA-SM3PCPB usb Optical Mouse (draws 50mA) <br />
<br />
* '''Sun microsystems'''<br />
** Model: FID-638 , SunPN: 371-0788-01<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/optical-mice/MI015/ MI015]<br />
<br />
* '''Swiftpoint'''<br />
** [http://http://www.americas.futuremouse.com/] Swiftpoint Mini Wireless Optical Mouse. Does not require any special drivers. Haven't confirmed if charging the mouse requires a powered USB hub or not.<br />
<br />
* '''Targus'''<br />
** AMU2701EUK (B)<br />
<br />
* '''Technika'''<br />
** TKOPTM2 (B)<br />
**TKD-211<br />
<br />
* '''Tesco'''<br />
** Wired optical mouse M211 (B)<br />
<br />
*'''The Pi Hut'''<br />
** USB Mouse for Raspberry Pi (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Keyboard & Mouse Set (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust Nanou Wireless Micro Mouse http://trust.com/products/product.aspx?artnr=17087<br />
<br />
* '''Verbatiam'''<br />
**Mini Nano Optical Mouse 97470 (wireless on non-powered 3 usb dongle hub) (B)<br />
<br />
* '''Xenta'''<br />
** MOW0810 (B)<br />
** Wired Optical Mouse (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Generic'''<br />
** Generic 2.4GHz Wireless Mouse (ID 040b:2013 Weltrend Semiconductor) (B)<br />
<br />
===Problem USB Mouse Devices===<br />
The following is a list of specific mouse devices that have problems working with the Raspberry Pi<br />
* '''A4Tech'''<br />
** Model G7-630 Wireless Mouse, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''HP'''<br />
** HP Retractable Mobile Mouse (Optical) HP Product Number XP472AA - errors / boot loop RASPBMC (B)removed mouse, started with no further errors. <br />
<br />
* '''Logik'''<br />
** Logik IMF Blue Trace Wired USB mouse (Model LMWBLU11) - disconnects from the USB port every 20 seconds when using the Raspian distro. Always reconnects to the USB port successfully (B)<br />
<br />
* '''Logitech'''<br />
** Logitech G400 Gaming Mouse - 100% CPU load and laggy mouse cursor when the mouse is moved. MX518 works fine on the same setup, so I suspect it's a polling rate issue. [http://tech2.in.com/reviews/mice/logitech-g400-is-it-a-worthy-successor/231012 this] says the mouse is 1000Hz out of the box, whereas the 518 is only 125Hz. Solution found: add usbhid.mousepoll=8 to the kernel commandline.<br />
<br />
* '''Microsoft'''<br />
** Microsoft Touch Mouse - Does not see right clicks, Only left.<br />
<br />
* '''Razer'''<br />
** Naga Wired USB mouse - the mouse seems to present itself as a keyboard because the numpad on the left-hand side of the device works but the cursor doesn't move.<br />
<br />
* '''Roccat'''<br />
** Kone[+] Wired USB mouse - Nothing happens when moving the mouse, haven't looked further into the issue (B)<br />
<br />
* '''Trust'''<br />
** Optical USB Mouse MI-2250 - Nothing happens when moving the mouse (B)<br />
<br />
* '''Xenta'''<br />
** Multimedia Wireless Keyboard and Mouse Set (Mouse Model: HM-3301) (B) - frequent lost connection giving stuttering mouse cursor indicating USB current not enough for dongle<br />
<br />
== USB Real Time Clocks ==<br />
*Cymbet<br />
** Cymbet CBC-EVAL-06 USB Real Time Clock (FT2232 to SPI to RV-2123)<br />
Device information at http://www.cymbet.com/pdfs/DS-72-22.pdf<br />
Code to access the RTC from Linux: https://github.com/owendelong/Cymbet-RTC<br />
Does not require a powered hub.<br />
<br />
== USB WiFi Adapters ==<br />
<br />
See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing<br />
<br />
There is a howto on installing the TL-WN722N adapter [http://elinux.org/RPi_Peripherals#Wireless:_TP-Link_TL-WN722N_USB_wireless_adapter_.28Debian_6.29 here], which also acts as a guide for installing others too.<br />
<br />
===Working USB Wifi Adapters===<br />
<br />
These adapters are known to work on the Raspberry Pi. This list is not exhaustive, other adapters may well work, but have not yet been tried.<br />
<br />
'''Note:''' A WiFi adapter will probably need more power than the Raspberry Pi USB port can provide, especially if<br />
there is a large distance from the WiFi adapter to the WiFi Access Point. Therefore, you may need to plug the WiFi adapter into a powered USB hub.<br />
<br />
* '''3COM'''<br />
** 3CRUSB10075: ZyDAS zd1211rw chipset (!)<br />
<br />
* '''7DayShop'''<br />
** W-3S01BLK, W-3S01BLKTWIN : Unbranded product available from 7DayShop, in a single or twin pack. [http://www.7dayshop.com/catalog/product_info.php?cPath=777_9&products_id=112046], [http://www.7dayshop.com/catalog/product_info.php?&products_id=112527]. Tested on Debian Wheezy, with the dongle attached directly to the RPi along with the wireless keyboard receiver. Shows up as a Ralink RT5370 device, and no drivers or additional software downloads required. Created wpa.conf, edited 'interfaces' file and restarted the networking. The manufacturer portion of the MAC address (7cdd90) is assigned to "Shenzhen Ogemray Technology Co., Ltd."<br />
** It works without additional software connected directly to a Rev 2 Pi but stops working after a period of time (3 to 4 hours) with a fully updated Wheezy and all the 'USB workarounds' [http://elinux.org/Rpi_USB_check-list] in place. <br />
<br />
* '''Alfa'''<br />
** AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware package)<br />
** AWUS036NH: Tested on Arch Linux ARM using the rt2800usb module.<br />
** AWUS036NH: Tested on Debian Wheezy (with Ralink firmware package). Tested on Raspbian too (drivers from aircrack-ng).<br />
** AWUS036H (500mW version): Tested on Raspbian (drivers from aircrack-ng).<br />
** AWUS036H (1W version): Tested on Raspbian (drivers from aircrack-ng). Needs USB powered HUB or Rev2 of the board / polyfuse bypass.<br />
** AWUS036NHA: Tested on Raspbian (drivers from aircrack-ng). Works fine if connected after boot, otherwise Raspberry Pi won't boot up.<br />
<br />
* '''AirLink101'''<br />
** AWLL5088: Tested on Debian Wheezy. This adapter is based on the OEM Edimax EW-7811Un. For automatic installation, See MrEngmanns script listed below under the Edimax device.<br />
<br />
* '''Asus'''<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N10] USB ID 0b05:1786, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B) (not needed with latest Raspbian “wheezy” 2012-07-15: this Asus works N10 out of the box) Does not support nl80211 APIS, so hostapd won't work.<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N13] USB ID 0b05:17ab, works with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1 image] as it includes kernel [http://www.element14.com/community/message/57635#57660 with 8192u driver built-in] (B)<br />
** WL-167G v1 USB ID 0b05:1706, Ralink RT2571 working out-of-the-box on Debian image from 2012-04-19. Requires powered hub, otherwise it is detected by OS but will not function.<br />
<br />
* '''Belkin'''<br />
** Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]. On Debian requires the firmware-ralink package from the non-free repository. The usbcore module needs to be added to /etc/modules [http://www.penguintutor.com/blog/viewblog.php?blog=6281 install instructions].<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Tested on OpenELEC (works OOB), RaspBMC (works OOB), Raspian - 2012-07-15-wheezy-raspbian (followed [http://forum.xbian.org/viewtopic.php?f=7&t=29 instructions here]) '''Powered hub required!'''<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Works on RaspBMC OOB (with NetworkManager plugin). Works WITHOUT powered hub on 5v 800mA power with 6 overvolt (nothing else connected to USB)<br />
** Belkin Components F7D1101 v1 Basic Wireless Adapter [Realtek RTL8188SU] USB ID 050d:945a, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B)<br />
**Belkin Components F6D4050 V1 [Realtek RT3070] USB ID: 050d:935a Driver: RT3572STA(recommended),RT2800USB,RT2870STA. Tested under Arch using [https://wiki.archlinux.org/index.php/Setting_Up_Belkin_F6D4050_Wireless_USB_Dongles this] guide.<br />
**Belkin Components F6D4050 V1/V2 [Realtek RT3070] USB ID: 050d:935a / 935b Driver: RT3572STA. Tested with Raspbian - See [http://iggy82.blogspot.co.uk/2012/08/wireless-n-raspberry-pi-belkin-f6d4050.html installation instructions] - Powered hub not required!<br />
** Belkin Components F7D2102 "N300" Micro Wireless USB adapter. Tested with Occidentalis 0.1. Tested and working on Rasbian wheezy (and RaspBMC), driver RTL8192CU, no powered hub needed (dongle directly attached to the onboard ports)<br />
** Belkin Components F9L1001v1 "N150" Wireless USB Adapter. Tested and working on Rasbian wheezy WITHOUT powered hub. <br />
** Belkin Surf Micro WLAN USB-Adapter (Raspbian Wheezy, unpowered hub, "N150")<br />
<br />
* '''BlueProton'''<br />
** [http://www.element14.com/community/docs/DOC-44703 BT3] USB ID: 0bda:8187; tested on Debian, Fedora & Arch; rtl8187 driver (B)<br />
<br />
* '''Buffalo'''<br />
** USB ID: 0411:01A2 WLI-UC-GNM - Tested on Raspbmc; rt2800usb driver <br />
<br />
* '''Conceptronic'''<br />
** C300RU. Works out of the box in Raspbian. Causes reboot when plugging on a live Rev. 2 RPi<br />
<br />
* '''Conrad'''<br />
** WLAN Stick N150 mini. Works out of the box in OpenELEC, [http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/ requires firmware-realtek and r8712u kernel module on Debian].<br />
** WLAN Stick N150 Nano [Realtek RTL8188CUS]. Requires a powered USB hub. See Micronet SP907NS for installation instructions and script.<br />
<br />
* '''DIGICOM'''<br />
** USBWAVE54 [chipset Zydas ZD1211] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave54]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with zd1211-firmware . <br />
** USBWAVE300C [chipset Ralink 2870] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave300c]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with firmware-ralink . <br />
<br />
* '''D-Link'''<br />
** AirPlus G DWL-G122 (rev. E). USB ID 07d1:3c0f, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository. (However I experience total crashes on raspbian 2012-07-15 after a few minutes of load on the wlan. Will have to investigate via serial console.)<br />
** AirPlus G DWL-G122 (rev. C). USB ID 07d1:3c03, Ralink RT2571. Working out-of-the-box on Arch image from 2012-04-29.<br />
** AirPlus G DWL-G122 (rev. B1). USB ID 2001:3c00, Ralink RT2571. Working out-of-the-box on Arch image from 2012-06-13.<br />
** DWA-110 (Version A1). Requires the ralink package from the non-free repository on Debian.<br />
** DWA-121 (Version A1). Wireless N 150 Pico. Works out-of-the-box with Raspian Wheezy (2012-09-18)<br />
** DWA-123 (Version A1). USB ID 2001:3c17, Ralink RT2800. Working out-of-the-box on Arch image from 2012-04-29. (working without UBS Hub - not yet sure if it achieves full speed though.)<br />
** DWA-131 USB ID 07d1:3303,Realtek RTL8192SU, 802.11n Wireless N Nano. Works out of the box on Raspbian “wheezy”. Verified with direct USB : no powered USB hub needed. Also verified when Nano used in powered USB hub. Someone had trouble configuring SSID/Passphrase in etc/network/interfaces file. But no problem & very easy to configure using wicd : wicd is a gui interface on LXDE for network configuration. Install it using command-line : <code>apt-get install wicd</code>. Once configured ith wicd to auto-run on boot, no need to turn back to LXDE. Recommended.<br />
** DWA-140 (Version B1). USB ID 07d1:3c09, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-140 (Version B2). USB ID 07d1:3c0a, Ralink RT3072. Workaround for faulty firmware binary: Place file rt2870.bin from [https://launchpad.net/ubuntu/oneiric/+source/linux-firmware/1.53/+files/linux-firmware_1.53.tar.gz linux-firmware_1.53.tar.gz] in /lib/firmware. [https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/770232 Explanation].<br />
** DWA-160 (Version B1). USB ID 07d1:3c11, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-160 (Version A2). USB ID 07d1:3a09, Atheros AR9170. (NOTE: I can only get it to work through powered USB hub) requires carl9170-fw firmware [http://http://aur.archlinux.org/packages.php/packages.php?ID=44102]<br />
<br />
* '''Edimax'''<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] USB ID 7392:7811, RTL8192CU, driver blob [http://www.electrictea.co.uk/rpi/8192cu.tar.gz download] via [http://www.element14.com/community/docs/DOC-44703 Element14], works with WPA2-AES-CCMP ([http://www.ctrl-alt-del.cc/2012/05/raspberry-pi-meets-edimax-ew-7811un-wireless-ada.html howto]) (B) - [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Alternative driver download link that works with Raspian]<br />
** The EW-7811Un can be powered directly from the Raspberry Pi if the Raspberry Pi is powered using a well regulated power supply.<br />
** A script-based installation for the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] by MrEngman can be found [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=26&t=6256&hilit=edimax on the RasPi forums]. Tested with Debian Squeeze and Raspbian. [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt An installation guide can be found here.]<br />
** Instructions for getting the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] working in Raspbmc (tested RC3) can be found [http://forum.stmlabs.com/showthread.php?tid=780 here].<br />
** Simple step-by-step instructions for [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] which uses the RTL8192 chipset [[RPi_edimax_EW-7811Un]](B)<br />
** [http://www.edimax.com/en/produce_detail.php?pd_id=8&pl1_id=1&pl2_id=44 EW-7318USg] USB ID 148f:2573, rt73usb. RT2573 chipset. Works with powered usb-hub or shorted polyfuses.<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=261&pl1_id=1&pl2_id=44 EW-7711UAn], Ralink RT2870, works perfectly on Arch with a powered hub (not tested without yet). Simply required wireless_tools and wpa_supplicant, the drivers/firmware are included in kernel 3.0. I followed the Arch [https://wiki.archlinux.org/index.php/Wireless_Setup Wireless Setup] instructions.<br />
<br />
* '''edup'''<br />
** [[http://www2.buyincoins.com/details/usb-150m-wifi-wireless-lan-network-card-adapter-antenna-product-1916.html Edup 150MBPS wifi adapter]] USB ID: 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to install the firmware as rt2870.bin in /lib/firmware.([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) (B)<br />
** [http://www.szedup.com/show.aspx?id=1681 edup nano EP-N8508] Use method shown [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=7471&p=91736 here] for debian. Requires powered USB hub for adequate power. When directly powered by Pi, it fails after a few minutes. (B) Unusable with analog audio because when data is being send or recieved the audio get disorted.<br />
<br />
* '''Eminent'''<br />
** EM4575 - rt2800usb driver.<br />
<br />
* '''EnGenius'''<br />
** EUB9603 EXT - Realtek r8712u driver <br />
<br />
* '''Gigabyte'''<br />
** Gigabyte GN-WB32L 802.11n USB WLAN Card. Works with the rt2800usb driver.<br />
<br />
* '''GMYLE'''<br />
** Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.<br />
<br />
* '''IOGear'''<br />
** [http://www.element14.com/community/docs/DOC-44703 GWU625] USB ID 0bda:8172, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian Squeeze and install firmware-realtek from non-free squeeze repo. No need to download firmware when using Debian Wheezy (B)<br />
<br />
* '''Linksys'''<br />
** Linksys (Cisco) WUSB100 ver.2 1737:0078, tested on raspbian; follow [http://www.brucalipto.org/linux/the-raspberry-diary-wusb100-wireless-n/ Brucalipto.org] instructions; not stress tested but works without issues for light network load.<br />
** Linksys (Cisco) WUSB600N, test on raspbian, details [http://elibtronic.ca/content/20120731/raspberry-pi-part-1-wifi-support here]<br />
** Linksys WUSB54GC (manufactured 07/2008) No issues!<br />
<br />
* '''LogiLink'''<br />
** Wireless LAN USB 2.0 Nano Adapter 802.11n LogiLink [http://www.logilink.eu/showproduct/WL0084B.htm] is working even usb powered.<br />
<br />
* '''Micronet'''<br />
** Micronet SP907NS, 11N Wireless LAN USB Adapter (uses Realtek RTL8188CUS) works plugged directly into R-Pi USB (B) [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt Debian installation instructions] IMPORTANT: read the instructions first to avoid problems, and [http://dl.dropbox.com/u/80256631/install-rtl8188cus-latest.sh Auto-install script]. The script has been used to install other adapters using the RTL8188CUS chip. [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Updated driver] that handles the latest rpi-updates that kill the original driver, download for manual installation, automatically installed by the Auto-install script.<br />
<br />
* '''MSI'''<br />
** 0db0:6861 MSI-6861 802.11g WiFi adapter (US54G): works with external powered USB hub, requires firmware from [http://sourceforge.net/projects/zd1211/files/zd1211-firmware/ here], power management must be disabled: <code>iwconfig wlan0 power off</code><br />
<br />
* '''Mvix'''<br />
** Mvix Nubbin (MS-811N): works out of the box on Raspbian "wheezy" and does not need a powered USB hub.<br />
<br />
* '''Netgear''' <br />
** N150: Reported as WNA1100 device, uses the Atheros ar9271 chipset. On Debian, requires the <code>firmware-atheros</code> package from the <code>squeeze-backports</code> non-free repository (!)<br />
** N150: Some versions reported as Realtek RTL8188CUS device. Read Micronet entry above and use RTL8188CUS script for installation. Works best plugged into powered USB hub.<br />
** WG111v1: Prism54 chipset. Needs powered hub. Follow info for Prism54 chipset on Debian wiki.<br />
** WG111v2: Realtek rtl8187 chipset (!)<br />
<br />
* '''OvisLink'''<br />
** Evo-W300USB: USB ID 148f:2270 Ralink Technology RT2770. apt-get install firmware-ralink<br />
<br />
* '''Patriot Memory'''<br />
** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered usb hub.<br />
** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module<br />
<br />
* '''Ralink'''<br />
** inner 02 joggler wifi usb RT2770F USB-ID 148f:2770 (firmware-ralink required) (only got dhcp on powered hub)<br />
** [http://www.dx.com/p/24688 RT2070] USB-ID 148f:2070 firmware is already loaded into Raspbian. For Debian, the firmware must be installed ([http://wiki.debian.org/rt2870sta instructions]). Needs a powered USB hub.<br />
** [http://www.element14.com/community/docs/DOC-44703 RT2501/RT2573] USB-ID 148f:2573 (firmware-ralink required) (B)<br />
** RT5370 USB-ID 148f:5370 ([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) [[RPi_Ralink_WLAN_devices]](B). An image of an adapter with this chip can be found [http://i.imgur.com/wRF7L.jpg here].<br />
<br />
* '''Rosewill'''<br />
** RNX-N180UBE Wireless B/G/N Adapter<br />
*** Realtek RTL8191SU chipset, USB-ID 0bda:8172<br />
*** Tested in Arch, works out of box. Powered USB hub required.<br />
*** Tested in Raspbian, used wicd to configure network settings. Powered USB hub Required.<br />
*** Tested in Raspbmc. Needs package firmware-realtek and used wicd-curses to configure. Powered USB hub required<br />
** RNX-G1 Wireless B/G Adapter<br />
*** Realtek RTL8187 chipset, USB-ID 0bda:8187<br />
*** Tested in Arch, works out of box. USB hub required.<br />
** RNX-MiniN1 (RWLD-110001) Wireless-N 2.0 Dongle (Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter)<br />
*** Tested in Raspbian, powered from USB hub.<br />
<br />
* '''Sagem'''<br />
** Sagem Wireless USB stick XG-760N : USB ID 079b:0062, Module is not shipped in Debian image, but can be "sudo apt-get install zd1211-firmware"<br />
<br />
* '''Sempre'''<br />
** Sempre Wireless USB stick WU300-2: USB ID 0bda:8172, Realtek r8712u driver + firmware-realtek package. Module is shipped in Raspbian image. If you need to build it for other distros, read this: http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/<br />
<br />
* '''SL'''<br />
** SL-1507N: USB 802.11n 150M WiFi Wireless Lan Network Card Adapter SL-1507N Black<br />
*** I bought this on on eBay for $4.19 (free shipping) @ http://www.ebay.com/itm/270853614804?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_4379wt_1199<br />
*** It worked out of the box on Raspbmc RC4, with the network manager add-on; seems to be an rt2800usb<br />
*** dmesg output "usbcore: registered new interface driver rt2800usb"<br />
<br />
* '''SMC'''<br />
** SMCWUSBS-N : Hardware detected as rt2800 but missing firmware; "sudo apt-get install firmware-ralink" fixed it<br />
** SMCWUSB-G : Gives "couldn't load firmware" error. "sudo apt-get install zd1211-firmware" fixes it.<br />
<br />
* '''Sony'''<br />
** Sony UWA-BR100 802.11abgn Wireless Adapter [Atheros AR7010+AR9280] (Vendor ID: 0411, Product ID: 017f) - Tested with Raspbian. Needs package firmware-atheros.(B)<br />
<br />
* '''Tenda''' <br />
** USB 11n adapter on a G network: Ralink 2870/3070 driver (!)<br />
** Tenda W311U Mini 11N Wireless USB Adapter (USB-ID 148f:3070): Ralink 2870/3070 driver; needs powered hub. [http://blog.modmypi.com/2012/06/installing-tenda-w311u-mini-wireless.html Debian installation instructions]<br />
** Tenda W311U+ Wireless USB Adapter - Tested with Raspian.<br />
<br />
*'''The Pi Hut'''<br />
** USB 802.11n WIFI adapter (from [http://thepihut.com/products/usb-wifi-adapter-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''TP-Link'''<br />
** TL-WN422G v2 (ath9k_htc) Works OOTB in Debian Wheezy Beta. Runs without powered Hub when plugged into running RasPi, but the RasPi won't boot while the stick is plugged in.<br />
** TL-WN721N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B) | works OOTB with wheezy raspbian (2012-08-16) connected directly to raspberry pi (B) and AP functionality tested with hostapd.<br />
** TL-WN722N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B)<br />
** TL-WN821N v3 (ath9k_htc, htc_7010.fw); works out of the box on ArchLinuxARM and on OpenElec (>r11211), Problems with prior OpenElec; needs powered USB Hub (B) <br />
<br />
* '''Trendnet'''<br />
** [http://www.wikidevi.com/wiki/TRENDnet_TEW-648UBM TEW-648UBM] USB ID: 20f4:648b, works OOTB with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/ Adafruit Occidentials Raspbian Wheezy variant] as it includes kernel with [http://www.wikidevi.com/wiki/Special:Ask?title=Special%3AAsk&q=%5B%5BChip1+model%3A%3ARTL8188CUS%5D%5D&po=%3FInterface%0D%0A%3FFCC+ID%0D%0A%3FVendor+ID%0D%0A%3FDevice+ID%0D%0A%3FChip1+model%0D%0A%3FSupported+802dot11+protocols%0D%0A%3FMIMO+status%0D%0A%3FOUI%0D%0A&sort_num=&order_num=ASC&eq=yes&p%5Bformat%5D=broadtable&p%5Blimit%5D=500&p%5Bsort%5D=&p%5Boffset%5D=&p%5Bheaders%5D=show&p%5Bmainlabel%5D=&p%5Blink%5D=all&p%5Bsearchlabel%5D=&p%5Bintro%5D=&p%5Boutro%5D=&p%5Bdefault%5D=&p%5Bclass%5D=sortable+wikitable+smwtable&eq=yes RTL8188CUS driver built-in] (B)<br />
<br />
* '''Widemac'''<br />
** RT5370 Wireless Adapter from [http://www.ebay.co.uk/itm/180887771838?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Ebay] runs without powered hub. Follow these [http://elinux.org/RPi_Ralink_WLAN_devices instructions] but go to [http://ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/ ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/] and pick the latest firmware-ralink_0.xx_all.deb<br />
<br />
* '''ZyXEL'''<br />
** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)<br />
<br />
===Problem USB Wifi Adapters===<br />
<br />
These adapters were tested and found to have issues the Raspberry Pi. Note [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=6928] as a possible solution/explanation for errors while running LXDE.<br />
<br />
* '''Alfa'''<br />
** AWUS036NHA (Vendor ID: 0cf3, Product ID: 9271) - Tested with Raspbian. Works fine if connected after boot. Kills boot process if previously attached. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=16809&p=169469#p169469 Details here.]<br />
<br />
* '''EDIMAX'''<br />
** EW-7811Un (Vendor ID: 7397, Product ID: 7811) - Reports as containing the Realtek RTL8188CUS chipset listed below, no lockup or kernal oops under wheezy but dmesg reports constant timeouts trying to initialize the module.<br />
<br />
* '''Linksys'''<br />
** WUSB300N (Vendor ID: 13B1, Product ID: 0029) - Tested with Raspbian, OpenELEC, among others. No Linux chipset support for Marvell 88W8362 at all.<br />
<br />
* '''LogiLink'''<br />
** WL0085 tested under debian (squeeze, wheezy, raspbian); no stable connection can be established. This gets even worse when X is running.<br />
<br />
* '''MicroNEXT'''<br />
** MN-WD152B (Debian image) modprobe hangs when plugged in, lsusb hangs. udevd errors in the logs. [http://www.element14.com/community/thread/17632] [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=6737]<br />
*** Possible fix: try the new [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1] image (based on Raspbian Wheezy) as it includes the needed 8192cu driver builtin to the kernel<br />
<br />
* '''Netgear'''<br />
** WNDA3100v2 tested with debian (wheezy); no driver for broadcom chipset (see [http://www.wikidevi.com/wiki/Netgear_WNDA3100v2 http://www.wikidevi.com/wiki/Netgear_WNDA3100v2]).<br />
<br />
* '''Realtek'''<br />
** RTL8188CUS USB-ID 0bda:8176, kernel oops in dmesg and freeze when pulled from USB. (B)<br />
<br />
* '''Trendnet'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TEW-424UB] USB ID: 0bda:8189; tested on Debian, Fedora & Arch; rtl8187 driver; errors with LXDE running (B)<br />
<br />
* '''TP-Link'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TL-WN821N] USB ID: 0cf3:7015; tested on Debian; requires [http://linuxwireless.org/download/htc_fw/1.3/htc_7010.fw htc_7010.fw] firmware; ath9k_htc driver; errors with LXDE running (B)<br />
** TL-WN723N USB ID: 0bda:8176; tested on Arch without a powered hub; it seems to draw too much current.<br />
<br />
== USB Bluetooth adapters ==<br />
===Working Bluetooth adapters===<br />
* Asus USBIA-EG (paired with Asus Blutooth Keyboard/Media Center Remote<br />
** Verified works error-free in XBMC. Text echo problems exist in Raspbian<br />
* Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) - (USB ID 0a12:0001)<br />
** Example of above is; TOPDIGI UA01 Bluetooth USB Dongle Plug and Play (install bluez package from std repos)<br />
** Tesco own brand 'Technika' Nano Bluetooth Adaptor has the Cambridge Silicon Radio chipset and works fine, cost £5.97 at time of posting.<br />
** Hama USB Bluetooth 3.0 adapter (Class 1) ~£10 on amazon.co.uk.<br />
** Another sample: Product ID: 0a12:0001, pictured here: http://www.element14.com/community/message/58288<br />
** RiiTek RT-MWK02+ - comes with a usb bluetooth adapter that works perfectly for both the RiiTek mini bluetooth keyboard/mouse and other bluetooth devices. Tested both on builtin USB and on powered USB hub. There are other RiiTek bluetooth (and non-bluetooth wireless) devices on the working list. Bluetooth adapter shows up in lsusb as "0a12:0001 Cambridge Silicon Radio" - this is notable as most other sources of this chipset do not seem to be available in the US.<br />
* D-Link DBT-122, with ID 07d1:f101, using a Broadcom chip<br />
** http://www.element14.com/community/message/58288<br />
* IOGear GBU321 (Broadcom BCM2045 Chipset)<br />
** Works with Raspbian Wheezy directly attached to Pi and via powered USB hub.<br />
* Trust BT-2400p<br />
** Working well with Raspbian Wheezy directly attached to Pi. Using with sma-bluetooth (SMA Solar Inverter reading software).<br />
<br />
===Problem Bluetooth adapters===<br />
* '''Belkin'''<br />
** Belkin F8T017. Tested with Raspbian 2012-07-15 and bluez installed with apt-get. When dongle is inserted into Pluscom powered USB hub, my remote PuTTY session scrolls incredibly slowly (testing with ls -R to generate text). Suspect network issue. Lots of errors on dmesg too. Pi itself is responsive when using directly. On removal of the device everything goes back to normal.<br />
* '''Generic'''<br />
** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.<br />
* Asus USB-BT211<br />
** Shows up as HCI device in Raspbian, but does not scan or pair.<br />
** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962<br />
<br />
== USB Ethernet adapters ==<br />
===Working Ethernet adapters===<br />
* '''Wintech'''<br />
** USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver. Probably needs more than 100 mA current. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=46&t=8708#p106136]<br />
* '''LogiLink'''<br />
** USB 2.0 UA0144: AX88772 chipset using the asix kernel driver. Tested only on powered USB hub so far.<br />
** LogiLink Fast EN USB 2.0 to RJ45 Adapter: Test on wheezy-Raspian (2012-08-16) without USB Hub will be confirmed<br />
lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter <br />
* '''Apple'''<br />
** Apple USB Ethernet Adapter using asix kernel driver. Works out of the box on Raspbian, haven't tested on any other OS.<br />
* '''Edimax'''<br />
** Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Works out of the box. Needs its own power source.<br />
* '''A-Link'''<br />
** A-Link NA1GU Gigabit USB 2.0 ethernet adapter<br />
This adapter works, but (probably) requires a bit of work. The driver for the chipset (Asix AX88178) included with the Raspbian kernel (v 3.1.9+ Aug 7 2012) does '''not''' work. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. :-( In order to make it work you need to download the latest driver from [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=84;71;100&PLine=71 the chipset manufacturer]. The version I used was "Linux kernel 3.x/2.6.x Driver" v4.4.0, released 2012-05-18. Fortunately this is GNU GPLv2 -licenced source code and not a binary blob, so compiling it for the Raspberry Pi is perfectly doable. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. >:-( Fortunately there is [https://www.grendelman.net/wp/compiling-kernel-modules-for-raspbian-raspberry-pi a very useful guide] for how to get the sources from github, and preparing that source so that you can compile modules. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make && sudo make install". Reboot and you should have a fully working ethernet adapter.<br />
<br />
The adapter seems to work without a powered USB hub, but according to the specifications it can draw up to 190 mA, so there might be stability issues if additional power is not provided.<br />
<br />
===Problem Ethernet adapters===<br />
* Axago<br />
** Axago ADE-X1 10/100 Ethernet Adapter (usb: 9710:7830 driver:mcs7830). Adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. Needed to unplug and plug USB again. Tested with and without powered USB hub.<br />
<br />
== USB Sound Cards ==<br />
You will usually want the <code>alsa</code> package for sound. In the Debian image for Raspberry Pi (and possibly other distributions) USB sound cards are prevented from loading as the first sound card, which can be an annoyance if it's the only device you have. To disable this behaviour edit <code>/etc/modprobe.d/alsa-base.conf</code> and comment out the last line; <code>options snd-usb-audio index=-2</code> . If you are not user ''pi'' you may need to add your username to the ''audio'' group thus: <code>sudo adduser yourusername audio</code> (user ''pi'' usually belongs to this group anyway).<br />
<br />
* '''Creative'''<br />
** [http://asia.creative.com/products/product.asp?category=1&subcategory=207&product=17892 Sound Blaster Play!]<br />
* '''Daffodil'''<br />
** [http://www.amazon.co.uk/gp/product/B002FI7GWK/ref=oh_details_o03_s00_i00 USB Sound Adaptor US01] ('''NB:''' Headphone output only checked so far, some notes on progress etc. can be found at [http://www.cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor.html cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor] - 14.09.2012)<br />
* '''Edirol'''<br />
** [http://www.roland.com/products/en/UA-1A/ UA-1A]<br />
* '''Hercules'''<br />
** [http://www.hercules.com/fr/Cartes-Son/bdd/p/123/gamesurround-muse-xl-pocket-lt3/ Gamesurround Musel XL (Pocket LT3)]<br />
* '''Logilink'''<br />
** [http://www.logilink.de/showproduct/UA0053.htm?seticlanguage=en UA0053 USB Soundcard with Virtual 3D Soundeffects LogiLink]<br />
* '''Terratec'''<br />
** [http://www.terratec.net/fr/produkte/Aureon_Dual_USB_12339.html Aureon Dual USB]<br />
<br />
==USB 3G Dongles==<br />
* Huawei E173<br />
* Huawei E220<br />
* Huawei E160 (AT commands only)<br />
* Franklin U600 from Sprint / VirginMobile<br />
** Use usb_modeswitch and vendor 0x1fac and product 0x0150/0x0151<br />
* Digicom Internet Key 7.2 HSUPA '''MU372-L01''' [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MU372L01]<br />
Tested on Raspbian and Archlinux. Detected as 230d:0001. Works with cdc_acm driver. Install usb_modeswitch.<br />
There are 2 "com ports"( /dev/ttyACM0 and /dev/ttyACM1 ) . Tested with Network Manager.Works also perfectly with SAKYS3G [http://www.sakis3g.org/] tools (!! led is always off !!) and wvdial. A working wvdial.conf : http://ubuntuforums.org/showpost.php?p=10361881&postcount=28 . (for example for Vodafone IT , replace Init3 with this : Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" and replace line Modem = /dev/ttyUSB0 with Modem = /dev/ttyACM1 ) and run with wvdial voda .<br />
<br />
== USB IR Receivers==<br />
SMK Manufacturing, Inc. eHome Infrared Receiver (Works out of the box with OpenELEC)<br />
<br />
== USB Radio devices==<br />
*FM Radio<br />
** ADS InstantFM Music - FM radio tuner works fine under debian.<br />
<br />
== USB TV Tuners and DVB devices==<br />
*August<br />
**DVB-T205, based on rtl2832u chipset, working with [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0 this driver]. Tested with Saorview (Irish DTT service), both HD & SD.<br />
*DVBSky<br />
**[http://dvbsky.eu/Products_S860.html Mystique SaTiX-S2 Sky USB]: Scanning/watching SD and HD works via vdr and streamdev plugin, watching on the Pi directly is laggy as hell. DVB-USB and I2C support must be enabled in the kernel. Needs drivers/firmware from [http://dvbsky.eu/Support.html here]. <br />
*Hauppauge<br />
** Hauppauge NOVA-T Stick (Revision 70xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge NOVA-TD Stick (Revision 52xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge WinTV-HVR-1950 (tested analog tuner with omxplayer)<br />
*K-World<br />
** K-World UB499-2T Dual DVB-T USB Tuner. IT9137 chipset. With no other USB devices connected Pi can just about power this stick. IR and supplied remote work with XBMC.<br />
*Technisat<br />
**Technisat_SkyStar_USB_HD. Instructions: http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_HD Used the Pi to receive and redirect it via network to another host. Didn't try to play back the stream on the Pi itself. Tested with Astra 19.2E radio and SD-TV channels<br />
*Generic<br />
** [http://www.onsources.com/product_images/a/757/watch_and_record_digital_tv_dongle__44323_zoom.jpg DVB-T USB Dongle (Silver casing)], based on AF9015 chipset.<br />
** [http://www.electrodepot.fr/media/catalog/product/cache/1/image/500x/9df78eab33525d08d6e5fb8d27136e95/P926993.jpg DVB-T USB Dongle], based on RTL2832 FC12 (HD/SD), IR detected but not tested<br />
<br />
== USB Webcams ==<br />
<br />
Debian image is missing v4l kernel modules, so video devices are not available. Kernel and firmware upgrade can possibly be used to fix this[http://blog.pixelami.com/2012/06/raspberry-pi-firmware-update-for-debian-squeeze/].<br />
<br />
===Working USB Webcams===<br />
*'''Creative'''<br />
**Creative VF0470 Live! (works out of the box on ArchLinux)<br />
**Creative VF0260 Live! Cam Vista IM (works out of the box)<br />
**Creative VF0640 Live! Cam Socialize (works on Raspbian at 320x240 resolution, 15fps)<br />
**Webcam Notebook PD1170 (detects, untested)<br />
<br />
*'''HP'''<br />
**Webcam HD-2200 [http://www.amazon.com/HP-Webcam-HD-2200-BR384AA-ABA/dp/B004UR9P9Q/ (Amazon)] [http://shopping.hp.com/en_US/home-office/-/products/Electronics/Webcams/BR384AA?HP-HD-2200-Webcam (HP)] [http://www.walmart.com/ip/HP-Webcam-HD-2200/16775645 (Walmart)] <br />
**Webcam HP-3100 - UVCVideo /dev/video0 Needs chmod to 666 to operate. Will work without hub if only device in USB ports. Works with both Arch and wheezy out of the box<br />
<br />
*'''Logitech'''<br />
**Webcam C100 Model Number V-U0013 (works fine without powered hub - Tested on 2012-08-16-wheezy-raspbian image - motion detection was good - video streaming was really slow might be unusable)<br />
**Webcam C200<br />
**Webcam C270 (with external power)<br />
**Webcam C310 does not require a powered hub to capture snapshots<br />
**Webcam C510<br />
**Webcam C525 (works fine without powered hub)<br />
**HD Webcam C615 (works fine without powered hub)<br />
**Webcam C910 (with external power, is uncvideo)<br />
**QuickCam Orbit/Sphere USB webcam (ext. power) <br />
**QuickCam Pro 9000 - powered by Raspi, working on debian wheezy<br />
**Webcam Pro 9000 (046d:0809), powered by RPi (measured ~120 mA capturing at ~5 fps), works on Arch<br />
<br />
*'''Medion'''<br />
** MD86511 - powered by Raspi, working on Raspbian “wheezy” from 2012-07-15<br />
<br />
*'''Microsoft'''<br />
**Xbox Live Vision camera (045e:0294), powered by Raspi, working on Arch<br />
**LifeCam Cinema 720p USB HD Webcam H5D-00001 - Powered by USB Hub. Working on Raspbian "wheezy"<br />
**LifeCam HD-6000 - Powered by Raspberry Pi. Working on Raspbian "wheezy" (2012-07-15)<br />
**LifeCam NX-6000 - Powered by Raspberry Pi. Working on Debian "wheezy"<br />
**LifeCam VX-7000 - Powered by USB Hub. Working on Raspian "wheezy"<br />
**LifeCam VX-3000 - On "raspbian" wheezy (though there do appear to be some issues with image quality and getting partial frames and such, with fswebcam)<br />
**LifeCam VX-800 - Powered by Raspberry Pi. Working out of the box on Raspbian [http://www.amazon.it/Microsoft-JSD-00008-LifeCam-VX-800/dp/B0057FWVSC (Amazon)] Doesn't work at full 640 * 480 resolution but OK at 352 * 288.<br />
<br />
*'''Sony'''<br />
**PlayStation Eye (for PlayStation 3) (the occasional frame is corrupted/stutters when running at 640x480)<br />
**PlayStation Eyetoy (for PlayStation 2) (Occasional 'mangled frame' directly connected to Rev 2 Pi)<br />
<br />
*'''Trust'''<br />
** 2MP Auto Focus Webcam (works out of the box on ArchLinux)<br />
<br />
===Problem USB Webcams===<br />
<br />
*'''Creative'''<br />
**WebCam Pro / PD1030 - ov519 driver crashes almost immediately. ("gspca: ISOC data error: [0] len=0, status=-4004")<br />
<br />
*'''Logitech'''<br />
**Webcam Pro 9000 - Has issues capturing images at higher than default resolutions (using motion - Arch and Debian).<br />
**Webcam Pro 4000 - It uses pwc driver which does not work. Maybe it's because of general Raspi USB bug.<br />
<br />
*'''Microsoft'''<br />
**Lifecam HD5000 - Picture breaks up at the bottom<br />
**LifeCam Studio/Cinema - Has UVC issues detailed here [http://www.ideasonboard.org/uvc/#devices]. Horizontal lines problem [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12304]. Stability issues [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12247].<br />
<br />
*'''Sony'''<br />
**Eye Toy (PlayStation 2) model SLEH 00030 - (OV519 camera). Picture constantly breaks up on xawtv and wxcam under Arch Linux. Noted there were ISOC data error len=0 status=-4004 errors in dmesg. This happens when powered from the Pi and when powered from a Pluscom USB hub. Arch was updated on 17th July 2012<br />
<br />
*'''Trust'''<br />
**SPACEC@M 200 - (OV511 camera). Picture stops after a few seconds in xawtv under Arch Linux and xawtv reports libv4l2 errors. This happens when powered from the Pi and when powered from a Pluscom USB Hub. Arch was updated on 17th July 2012<br />
<br />
== USB GPS devices ==<br />
*Royaltek<br />
**Royaltek RGM 2000 SiRF2 using the included serial (TTL) to USB - converter. That uses a Profilic pl2303-chip so you'll need to compile the module or the kernel manually<br />
*Garmin<br />
**Garmin eTrex Vista HCx: Works but may draw much power. To get it working (software part): https://wiki.openstreetmap.org/wiki/USB_Garmin_on_GNU/Linux<br />
*GlobalSat<br />
**GlobalSat BU-353 Does not require a powered hub, works fine when directly plugged into the RPi. On Raspian, requires the gpsd and gpsd-client packages. For some reason, the gpsd daemon does not always start correctly on boot. You may need to do something like the following to manually restart it:<br /><pre>sudo killall gpsd; sudo gpsd /dev/ttyUSB0 -F /var/run/gpsd.sock</pre><br />
<br />
*Wintec<br />
**WBT-200: No problem on Debian<br />
*Holux<br />
**Holux M-215: Works fine on Arch, uses Silicon Labs CP210x RS232 serial adaptor driver<br />
*Bluenext<br />
**Bluenext BN903S: No problem on Debian image (19-04-2012).<br />
<br />
== USB UART adapters ==<br />
The USB UART adapter is used to access the serial console of the Raspberry Pi from a development host such as a laptop or desktop PC. The USB end connects to the PC and the UART header end connects to the USB. While it is possible to connect the USB end to another Raspberry Pi, this configuration has not been tested unless explicitly mentioned against an individual entry below.<br />
<br />
*'''FTDI'''<br />
**FT232 chip based adapters works for some people but others find it hangs Linux when the port is opened. module is ftdi_sio<br />
<br />
** FT2232D dual RS232/FIFO works (used in various JTAG devices)<br />
<br />
*Prolific<br />
**PL2303 chip based adaptors works fine on latest Debian tested with minicom and gtkterm<br />
<br />
== Other, exotic USB devices ==<br />
=== USB to SATA ===<br />
*'''Nippon Labs'''<br />
** 2.5" SATA HDD USB Adapter with silicone HDD sleeve. Model: USB-ADT-25SATA. Works on powered Hub, not directly to Raspberry Pi. Built-in "Y" power adapter.<br />
<br />
=== CAN Bus ===<br />
*PEAK-System (www.peak-system.com)<br />
**PCAN-USB using the driver (kernel module) from http://www.peak-system.com/fileadmin/media/linux/index.htm<br />
=== Home automation ===<br />
*Tellstick (www.telldus.com), installation [[R-Pi_Tellstick_core|instructions]]<br />
**Depends on libftdi1<br />
<br />
=== Touch Screen ===<br />
*ACER T230H touch screen [http://support.acer.com/acerpanam/monitor/2009/acer/t230h/t230hnv.shtml]<br />
**USB TS identifies as "Quanta Computer, Inc. Optical dual-touch panel", module hid_quanta<br />
**Seems to draw over 200 mA from USB!<br />
=== Floppy Disk Drive ===<br />
*Samsung USB Floppy Drive SFD-321U/HP<br />
**I suppose a floppy drive might be considered exotic nowadays!<br />
**LSUSB lists it as Samsung Electro-Mechanics Co. Floppy Disk Drive<br />
**Only tried connected to a powered USB hub, as the drive is labelled 5V at 0.5A on a Raspberry Pi running Debian Wheezy.<br />
**tail -f /var/log/syslog looking for mount device when plugged in, came up as SDA in testing.<br />
**sudo mkdir /media/floppy<br />
**sudo mount /dev/sda /media/floppy<br />
**Contents of floppy now available in /media/floppy<br />
**To remove drive, ensure no sessions have the floppy directory as the current working directory.<br />
**sudo umount /media/floppy<br />
=== USB Missile Launcher ===<br />
*USB Missile Launcher / Rocket Launcher sold in UK by Marks and Spencer but also sold under a range of other names.<br />
**USB ID 1130:0202 Tenx Technology, Inc. Use apt-get install pymissile (python code) and there is C code at [http://sourceforge.net/projects/usbmissile/ usbmissile from Source Forge]<br />
=== USB Docking Stations ===<br />
*StarTech USB 3.0 to Dual 2.5"/3.5" SATA HDD Dock (SATDOCK2U3GB)<br />
**This is an externally powered dual sata HDD docking station, which has USB2.0 compatibility with the Pi. <br />
**Tested with latest raspbmc and debian wheezy raspbian, 3.1.9+ #168<br />
=== USB RFID Reader ===<br />
*Unbranded 125KHz EM4100 RFID reader from eBay sellers (< £7), the one with a Windows logo on (easily scratches off for Linux users).<br />
**Initially would not work when plugged in directly to RPi. Worked when connected via an unpowered Trust hub. Worked after RPi was modified with 10K resistors over the USB polyfuses (warranty invalidated). Probably would work fine with powered hub.<br />
**Sends a 10 digit string to current window or console as if it was a keyboard. Can be captured independently of keyboard using Linux event interface (/dev/input) but kernel in current distributions does not have CONFIG_INPUT_EVDEV selected so kernel rebuild is necessary.<br />
=== JTAG ===<br />
* FTDI2232D dual RS232/FIFO based JTAG (e.g. SheevaPlug JTAGKey USB-ID 9e88:9e8f)<br />
** works using the RPi as a development host<br />
<br />
== PS2 / AT to USB Converters ==<br />
<br />
* Unbranded active converter known as the "blue cube". Based on the Cypress CY7C63723C 8 bit RISC. Please see http://geekhack.org/showwiki.php?title=PS2-to-USB+adapters for more information.<br />
Note that although the adapter might work, PS/2 keyboards were not designed to be low power USB devices, so they might not meet the requirement to work with considerable lowered supply voltage (4.4 volt) provided by the USB ports of the raspberry PI. These keyboards should work when powered by a powered hub. <br />
<br />
'''Tested PS2/AT keybords'''<br />
<br />
All above tested with the famous "blue cube" on a powered USB hub.<br />
<br />
*IBM Model F (please note requires an additional AT to PS2 converter)<br />
*Dell AT101w<br />
*Northgate Ominikey Ultra T (please note requires an aditonal AT to PS2 converter)<br />
<br />
* 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller<br />
** Working: Ipex RT215KTW PS/2 keyboard<br />
** Not working: HP SK-2502 PS/2 keyboard (gets power but does not init - three LEDs remain permanently lit. Keyboard + Holtek converter work on a Linux PC, although this keyboard doesn't work with some native PS/2 ports.)<br />
<br />
== Power adapters ==<br />
The Raspberry Pi uses a standard Micro USB (type B) power connector, which runs at 5v. Generally you can use a MicroUSB to USB cable and then either power the Raspberry Pi directly from your main computers USB ports (if they provide enough power), or by using a USB to Mains adaptor. A number of mobile phones use MicroUSB power cables, and these are compatible with the Raspberry Pi in most cases. Below is a list of power adaptors known to work.<br />
<br />
===Working power Adapters===<br />
* '''AlcaPower'''<br />
** 5V 2.5A Model AP5A - Charger/switching with 7 connectors(also Microusb)<br />
* '''Ansmann'''<br />
*** Dual USB charger slim, Model-Nr. 1201-0001<br />
* '''Apple'''<br />
** 5V 2.1A USB charger for iPad2, model A1357<br />
** 5V 1.0A USB Charger for iPod<br />
** 5V 1.0A USB Charger for iPhone 4<br />
* '''Amazon'''<br />
** 5V 0.85A USB charger for Kindle<br />
** 5V 2A Mains to USB A adaptor, Branded "CostMad" <br />
* '''Asus'''<br />
** 5V 2.0A USB charger for Google Nexus 7<br />
* '''Belkin'''<br />
** 5V 2.6A 4 port Ultra-Slim Desktop hub (Model F4U040) (RPi running from USB Hub port)<br />
** 5V 2.5A 4 port USB Hub (Model F5U404) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB 2.0 Mobile Powered Hub (Model F4U018) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB Hub (Model F5U706) (RPi running from USB Hub port)<br />
** Mini Surge Protector Dual USB Charger (Model BZ103050-TVL)<br />
** Universal USB Wall Charger (5V 1A) (Model F8Z222uk)<br />
* '''Blackberry'''<br />
** Charger for Pearl Flip 8220, Bold 9600 (B)<br />
** Charger for Tour 9630<br />
** 5V 0.7A Model PSM04R-0500CHW1(M), RIM Part Number HDW-17957-003 (B)<br />
** 5v 750mA Model RIM-C-0004aDUUUC-001, RIM Part Number HWD-24481-001 (comes with Blackberry 9300)<br />
** 5v 750mA Model RIM-C-0004ADUUS-001 035D, Single port plug. (Tested with USB B to Micro USB cable from Logitech H760 Headset)<br />
** 5V 2A Model PSAC10R-050QT, RIM Part Number HDW-34725-001<br />
* '''Dell'''<br />
** USB Hub integrated in Dell monitors (B)<br />
* '''Garmin'''<br />
** 5V 1A charger (Model: PSA105R-050Q) supplied with Garmin Edge 800 GPS. Requires a USB-A to MicroUSB-B cable. Belkin 6ft cable (F3U151B06) works.<br />
* '''Griffin'''<br />
** Power Block Model P2417. 5V 2.1A<br />
** Power Block Model P1190R2 Two USB 5V Outputs, 1Amp each<br />
* '''Hama'''<br />
** 1000mA Travel Charger for Micro USB universal (barcode nr: 4 007249 935854)<br />
* '''HP'''<br />
** 5.3V 2A Charger for HP Touchpad (B)<br />
* '''HTC'''<br />
** 5V 1A TCP-300 USB phone charger (B)<br />
** 5V 1A TC B250 USB charger (HTC R/N: 79H00096-00M)<br />
** 5V 1A TC E250 USB charger (HTC R/N: 79H00098-02M)<br />
* '''i-box (Philex Electronic Ltd)'''<br />
** 5V 1A USB charger, 1 USB socket, no USB lead supplied, Model: 76971HS/02 (available from ASDA and others in the UK) (B).<br />
* '''IDAPT'''<br />
** [http://www.idaptweb.com/universal_chargers/i4/ i4 multi device charger] - 3 interchangeable device tips + USB A socket ([https://twitter.com/andrewmk/status/226057302879375361 see it in use])<br />
* '''Innergie'''<br />
**15W Dual USB Adapter. Model: mMini AC15. Output: 5V, 3A (max per port), 15W max. [http://www.myinnergie.com/DuoPowerKit/specification.aspx Spec Sheet]<br />
* '''Kodak'''<br />
** 5V 1A TESA5G1-0501200<br />
** 5V 1.0A K20-AM<br />
* '''LG'''<br />
** 4.8V 1A Travel Adapter<br />
**5.1V 0.7A Travel Adapter (Model: STA-U34WVI)<br />
**5.1V 0.7A Travel Adapter (Model: STA-U12ER)<br />
* '''Logic'''<br />
** 4 port USB Hub (Model LP4HUB10). (RPi running from USB Hub port, red power line (+5v) inside hub cut) (B)<br />
*'''LogiLink'''<br />
**5V 2.1A Switching power supply, model PA0040 (B)<br />
* '''Logitech'''<br />
** 5V 1A SDC115-USB Remote Control Charger and cable<br />
* '''Maplin Electronics'''<br />
** 5V 1A dual USB power supply, model number H25B-MT-K2<br />
** Micro USB Power Supply N19HX<br />
* '''Medion'''<br />
** 5V 1A USB power supply for OYO ebook reader<br />
* '''Microsoft'''<br />
*** Zune Zune AC Adapter v2 <br />
* '''Motorola'''<br />
** [http://www.amazon.com/Motorola-Micro-USB-Home-Travel-Charger/dp/B004EYSKM8/ 5V 0.85A SPN5504 Charger with Cable]<br />
* '''Nokia'''<br />
** 5V 1.2A AC-10E Charger<br />
** [http://accessories.nokia.com/products/nokia-fast-usb-charger-ac-16/ 5V 1A AC-16E Charger]<br />
* '''Noname'''<br />
** 5V 2.1A KMS-AC09 4 port USB charger (B) [http://www.miniinthebox.com/kms-ac09-universal-ac-adapter-for-ipad-ipad-2-iphone-white_p208568.html]<br />
** 5.2V 1A MW-3NU10GT - no cable, but this one works well (1m): [http://www.amazon.de/gp/product/B005L8VELA]<br />
** 5V 1A Model H-IP008 Serial No. H10T80L068<br />
* '''Novatel Wireless'''<br />
** 5V 1.05A Charger, model number SSW-1811, packaged with Verizon Wireless MiFi device<br />
* '''Orange'''<br />
** 5V 0.7A Charger for Orange San Francisco<br />
* '''Palm'''<br />
** 5V 1A Charger for Palm Pixi+ (B)<br />
* '''Pantech'''<br />
** 5.0V 1A CNR USB with LG DLC100 micro usb cable<br />
* '''Phihong'''<br />
** Switching Power Supply. Model: PSAC09R-050. Output: 5V, 1.8A, microUSB. [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]<br />
* '''PortaPow'''<br />
** PortaPow UK Mains Wall Power Supply<br />
* '''RS Components'<br />
** HNP06UK (RS 7263069) Switching Adapter 5.0V 1200mA<br />
* '''Samsung'''<br />
** 5V 0.7A Charger for Galaxy S model ETA0U10EBE<br />
** 5V 0.7A Charger for Galaxy SII<br />
** 5V 1A Charger for Galaxy Nexus<br />
** 5V 0.7A Charger for Galaxy S Vibrant (SGH-T959)<br />
** 5V 0.7A Travel Adapter model ATADU10EBE<br />
** 5V 1A? Samsung C Series TV USB-port for external HDDs. Running stable with openelec<br />
** 5v ?A(Unknown) Samsung Service Port (USB) on LN32A330J1DXZA 720p 32 inch HDTV <br />
** 5V Unknown Ampere Samsung UA22D5000 & UA32D5000 TV USB Port. Test with Raspbian Wheezy, Raspbmc, and RPITC<br />
* '''Shun Shing'''<br />
** 100-240VAC to 5VDC 1A USB power supply, model SP5Q-AU [http://jaycar.co.nz/productView.asp?ID=MP3455 Jaycar]<br />
* '''Sony Ericsson'''<br />
** 5V 0.7A Charger CST-80<br />
* '''Travel Charger'''<br />
** 5V 2.0A USB Power Adapter, [http://www.amazon.co.uk/gp/product/B0065JCIPU/ Amazon Link]<br />
* '''Technika'''<br />
** 5V 1A USB Power Adapter, model MPASS01 (B)<br />
* '''The Pi Hut'''<br />
** Micro USB Power Supply for the Raspberry Pi. 5V 1000mA (from [http://thepihut.com/products/micro-usb-power-supply-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store]) (also from [http://www.ebay.co.uk/itm/330757401271 eBay ])<br />
* '''Trisonic'''<br />
** TS-CP600T - MICRO USB HOME & TRAVEL CHARGER (5V, 800mA) $3 at Daiso U.S. stores.<br />
* '''TruePower'''<br />
** [http://u-socket.com/ U-Socket] 5V 2.1A AC Receptacle with Built-in USB ports (2.1A per USB port) model ACE-7169<br />
* '''Voltcraft'''<br />
** SPS5-12W, 2500 mA, requires additional USB <-> miniUSB adapter/cable, works perfectly (bought from [http://www.conrad.de/ce/de/product/512660/VOLTCRAFT-SPS5-12W-Steckernetzteil-Steckernetzgeraet-5-VDC-2500-mA-12-Watt Conrad Shop])<br />
<br />
===Problem power Adapters===<br />
* '''Masterplug'''<br />
** Masterplug Surge Protected USB Adaptor 2 x 1A USB Polished Black - USB ports and ethernet don't work with this adapter and some screen artefacts using HDMI.<br />
* '''Monoprice'''<br />
** 5v, 2A 3 Outlet Power Surge Protector Wall Tap w/ 2 Built-In USB Charger - some display artifacts, sometimes unable to find mouse, some failures to boot. Measured less than 4.75v between TP1 and TP2 when used with a Monoprice cable.<br />
* '''Sony Ericsson'''<br />
** 5v, 850mA EP800. Some failures to boot , ethernet loops at boot.<br />
<br />
===External Battery packs (with 5V regulated output)===<br />
* '''Anker Astro3'''<br />
** Anker Astro3 10000mAh with Dual 2A USB Output<br />
* '''Duracell'''<br />
** PPS2 Instant USB Charger<br />
* '''Energizer/XPAL'''<br />
** XP18000 18000mAh Power Pack<br />
* '''Generic - eBay no brand'''<br />
** 6000T Pocket Power 5000mAh - eBay item 271009959140<br />
** Power Bank for iPad/iPhone 5000mAh (looks the same as a New Trent IMP50D or TeckNet iEP380) - eBay item 280914455938<br />
* '''New Trent'''<br />
** iCurve IMP70D 7000mAh (Approx 12hrs from full charge)<br />
** IMP120D 12000mAh<br />
* '''Sinoele'''<br />
** Movpower - Power Bank 5200mAh (8hrs with Wifi active)<br />
* '''TeckNet'''<br />
** iEP387 Dual-Port 7000mAh External Power Bank (The charging lead can be used to connect the Tecknet to the RPi. Ran the RPi with wifi dongle and wireless keyboard receiver for over 9 hours of light use.)<br />
** iEP392 Dual-Port 12000mAh External Power Bank (1A port, ~16.5 hours)<br />
** Rayovac PS60 5v 800mAh<br />
* '''VINZO'''<br />
** Power Bank 5000mAh Grey Output 5V 1000mA<br />
* '''Kodak Power Pack KP1000'''<br />
** 1A USB rechargeable battery pack - see [http://blog.sheasilverman.com/2012/09/its-alive/ Shea Silverman's blog]<br />
<br />
== Display adapters ==<br />
Note that active converter boxes may draw power through the HDMI port, and thus will put an extra load on your PSU, and also increase the current running through the PI's primary input fuse. HDMI ports (and the raspberry PI) are designed so that they deliver a very limited amount of power (50mA) to the TV/Monitor/display-adapter and much more isn't in theory allowed. In fact there is a diode (D1) in series with the power line which can only handle 200mA, if the adapter tries to draw much more than that the diode might fail. Therefore only externally powered adapters are to be recommended. Despite this, many people report success with these high powered devices.<br />
<br />
===HDMI->DVI-D===<br />
There are three kinds of DVI. There is DVI-D, a digital signal fully compatible with HDMI, so a passive cable can be used. There is DVI-I, which is a connector with both analog pins and digital pins. An HDMI to DVI-D adapter fits in a DVI-I female connector. Finally, there is DVI-A. This a fairly rare connection, but occasionally it will be found on some monitors and is an analog interface, in fact the same as VGA!<br />
<br />
Some adapters like Farnell part AK-CBHD03-BK are HDMI to DVI-I, which, while not fitting in a DVI-D monitor, are still compatible. The analog pins simply must be bent.<br />
<br />
The HDMI to DVI-D cable provided by Apple with the 2010 Mac Mini worked. It does not appear this adapter can be purchased separately.<br />
<br />
* AmazonBasics HDMI to DVI Adapter Cable (model SK231) works and is inexpensive.<br />
* [http://www.ebay.com/itm/DVI-Female-to-HDMI-Male-Adapter-Converter-Adaptor-Gold-for-HDTV-Full-HD-/320946033059?pt=US_Video_Cables_Adapters&hash=item4ab9dfd1a3 A generic HDMI-to-DVI converter from eBay]. Works well, but it's probably the cause of some power loss between the RPi and the monitor, causing [http://elinux.org/R-Pi_Troubleshooting#Interference_visible_on_a_HDMI_or_DVI_monitor this] problem. A setting of config_hdmi_boost='''5''' in /etc/boot solved this. Note that config_hdmi_boost='''4''', as suggested in the troubleshooting guide, helped but did not solve the problem completely.<br />
<br />
===HDMI->VGA converter boxes===<br />
Most will require use [[RPi_config.txt]]. Start off with hdmi_safe=1.<br />
<br />
[http://www.element14.com/community/groups/raspberry-pi/blog/2012/08/16/raspberry-pi-hdmi-to-vga-converter Sanoxy HDMI to VGA converter], $27 from Amazon, no changes required with official Raspbian Wheezy image (2012-Jul-15), note: had already disabled overscan previously<br />
<br />
http://www.amazon.co.uk/gp/product/B007KEIRNG -- "Neewer" HDMI to VGA -- some issues discussed below:<br />
However, according to user "Tom1989" the same Neewer HDMI to VGA adapter burned out BAT54 Schottky diode D1 on the RasPi and broke its HDMI output: [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9819 Serious HDMI Problems. What's that smell? Burning Raspberry!]. On that thread, "mahjongg" suggested the NXP (or equivalent) PMEG2010AET as a high-current replacement for D1. The PMEG2010AET has 1A max forward current, much greater than the BAT54's 200 mA limit which may be exceeded by your HDMI -> VGA converter. Remember that the converter's current must come from your RasPi power supply and go through the Micro USB cable and polyfuse F3, so you may get extra voltage drops and/or cause F3 to trip depending on how much current the converter uses. As always with board modifications, YMMV. Also on the "Burning Raspberry!" thread, user "pwinwood" reported the Neewer's current to be 400 mA, which is twice the limit of BAT54 diode D1. "pwinwood" also took the Neewer apart and added its own +5V connection adapted from a USB cable, which bypasses RasPi's Micro USB cable and polyfuse F3.<br />
<br />
http://www.amazon.co.uk/KanaaN-Adapter-Converter-Cable-Resolutions/dp/B007QT0NNW -- "Kanaan" HDMI-VGA<br />
<br />
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130699741793 -- eBay is swarming with $16 converters all like this one.<br />
<br />
This adapter -- http://www.ebay.co.uk/itm/300692770623 -- works from 640x480 up to 1920x1080, audio over HDMI works too.<br />
Sadly the IC's on the PCB have all been scrubbed.<br />
Requires HDMI boost and overscan, [[RPi_config.txt|config.txt]] settings for 640x480@60Hz:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=4<br />
<br>config_hdmi_boost=4<br />
<br>overscan_top=-30<br />
<br>overscan_bottom=-30<br />
<br>overscan_left=-30<br />
<br>overscan_right=-30<br />
<br />
According to user "Mortimer" -- HDFuryPro HDMI to YPbBr/VGA Converter found on Amazon -- http://www.amazon.co.uk/Inputs-Component-Video-YPbPr-Converter/dp/B00797ZZ4S/ -- Works with Raspberry Pi. Tested against a Philips 170B 1280x1024 LCD monitor, producing a full native resolution image. Not tested against a Component Video TV yet, and audio has yet to be got working.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
<br />
According to user "Mortimer" -- HDFury1 1080p HDMI to VGA Converter from HDFury.com. I'm not sure the HDFury1 can be got a hold of easily nowadays, I happened to have access to one to try out. HDFury2, 3 and 4 are available as far as I can tell, but are very pricey compared to alternatives. HDFury1 was around £80 when we bought one for a project at work. HDFury2 seems to be around £130, 3 and 4 are getting on towards £200 or more. So not to be recommended as a solution unless you happen to have one lying around. I don't believe there is any relationship between the company that produces these and the HDFuryPro I bought for myself (See above). I didn't alter any config settings, just plugged it in. It doesn't work without having its external power supply connected, as it requires 0.4A, which is too much draw for the 5V supply available from the HDMI socket on the Raspberry Pi. Its power LED lights, but no picture is produced. In comparison to the HDFuryPro this picture from this device is sharper, but not enough to justify the extra cost.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
http://www.amazon.co.uk/gp/product/B007SM7O2U/ref=oh_details_o02_s00_i00 - "Cable Matters"<br />
<br />
Here It is another option: http://www.dealextreme.com/p/hdmi-v1-4-male-to-vga-female-converter-adapter-cable-white-15cm-130458, is cheap (it's free shipping from china) and works perfectly, I tested it with an Acer VGA monitor (AL1511), without no change in my XBMC distribution.<br />
The config.txt for Raspbian (Flatron VGA monitor 1024 * 768):<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=16<br />
<br>hdmi_force_hotplug=1<br />
<br>disable_overscan=0<br />
<br />
<br />
And another one: http://cgi.ebay.pl/ws/eBayISAPI.dll?ViewItem&item=251086464644. Very cheap but works perfectly. No config.txt changes was needed at all. I've booted Raspbian and OpenELEC. Monitor is detected correctly and the optimal resolution is set (Raspbian) or you can change the res in the menu (OpenELEC). <br />
The /opt/vc/bin/tvservice is able to read monitor edid data. I tested the adapter using NEC 72VM 15" LCD. (1280x1024 60Hz, 1024x768 60Hz, 640x480 works) The adapter is based on Lontium LT8511A chip, but I was unable to get the spec for it.<br />
The D1 diode is getting very hot though. Most likely the adapter drives more than 200mA. The standard RS Components 1,2A usb power supply is able to provide enough power for the RPi and the adapter. I'll try to modify the adapter to connect external power to bypass D1.<br />
Marcin.<br />
<br />
===DVI-D -> VGA active adapters===<br />
None are currently listed<br />
<br />
===Composite->SCART===<br />
SCART adapters (SCART plugs with three RCA connectors in the back), will probably work when used with the yellow RCA plug connected to the R-PI's RCA video output. Additionally using a splitter cable (3.5mm jack plug on one end, and red-white RCA plugs on the other end) will probably work when plugged into the red and white (left and right audio channels) of the SCART adapter.<br />
<br />
* Generic - works<br />
<br />
===Composite->VGA converter boxes===<br />
* [http://www.extron.com/product/product.aspx?id=dvs204| Extron DVS-204] - works no problem!<br />
<br />
== SD cards ==<br />
<br />
Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)<br />
For this reason, please specify product numbers in the lists below, when possible.<br />
<br />
You can also attach the following fields from your card's CID :<br />
<pre><br />
cd /sys/class/mmc_host/mmc?/mmc?:*<br />
echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"<br />
</pre><br />
<br />
please merge with http://elinux.org/RPi_Performance#SD_card<br />
<br />
===Preinstalled SD Cards===<br />
Sandisk SD Cards Preinstalled with the latest Raspbian operating system are available from [http://thepihut.com The Pi Hut's Raspberry Pi Store].<br />
* '''SanDisk''' <br />
** [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
<br />
===Working SD Cards===<br />
* '''7DAYSHOP.COM''' <br />
** 8GB Professional SDHC Class 10 (man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0)<br />
* '''Adata''' <br />
** 2GB SD Class 2 Speedy (8B0947 printed on back) This card works with every distro I tried. May be old, may not be the fastest, but is very stable.<br />
** 4GB SDHC Class 4 (BH1109416141G)<br />
** 8GB SDHC Class 2 (MMB3F08GWMCA-GE)<br />
** 8GB SDHC Class 4 (MicroSD w/ adapter)<br />
** 8GB SDHC Class 6 (MMAGR08GUDCA-DB)<br />
** 8GB SDHC Class 10 (AUSDH8GCL10-R)<br />
** 8GB SDHC Class 10 (ASDH8GCL10-R) Tested on 2012-06-18-wheezy-beta.zip<br />
** 8GB SDHC Class 10 (P-SDH8G10-EC from BJ's USA tested on Raspbian)<br />
** 16GB SDHC Class 6<br />
** 16GB SDHC Class 10 (16GSDHC10)<br />
** 16GB SDHC Class 10 (microSD w/ adapter AUSDH16GCL10-RA1)<br />
** 32GB SDHC Class 10 (ASDH32GCL10-R) Tested on wheezy-beta with latest kernel and firmware and raspbian wheezy<br />
* '''AmazonBasics'''<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH0LS 8GB SDHC Class 10 B0058GH0LS]<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH1IK 16GB SDHC Class 10 B0058GH1IK]<br />
** 32GB SDHC Class 10<br />
* '''Apacer'''<br />
** 8GB microSDHC Class 10 (with adapter)<br />
** 8GB SDHC Class 6<br />
* '''Centon'''<br />
** 16GB SDHC Class 4 (1447 printed on back)<br />
* '''CnMemory'''<br />
** 8GB SDHC Class 4 (Silver/Black label says 'High Capacity Card') 84209_8GB_SDHC, bought from Maplins. No error messages seen, but operation is much slower than with a SanDisk 4GB Class 4 card.<br />
* '''Dane-Elec''' <br />
** 16GB SDHC Class 4<br />
** 16GB Pro 200X Class 10 DEMS16GB2683ENBA<br />
* '''Dikom'''<br />
** 16GB SDHC Class 10 (serial 207H3MD016IBSD)<br />
* '''Duracell'''<br />
** 4GB SDHC Class 4<br />
** 16GB SDHC Class 10 (labelled Pro Photo 200x)<br />
** 32GB SDHC Class 10 (man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0) (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012, following [[RPi_Performance#SD_card]])<br />
* '''Emtec''' <br />
** 2GB SD man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0<br />
** 4GB SDHC Class 4 (EKMSD4G60XHCN)<br />
** 16GB SDHC Class 10 (EKMSD16G150XHC) (less than half as fast as Sandisk 16gb Class 10)<br />
* '''Extrememory''' <br />
** 16GB SDHC Class 10 (man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0)<br />
** 32GB SDHC Class 10 (man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0)<br />
* '''Eye-Fi'''<br />
** 4GB WiFi SDHC (Wi-Fi doesn't work)<br />
* '''Fugi''' <br />
** 32GB SDHC Class 10 (P10NM00580A) (man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0)<br />
* '''Hama''' <br />
** 2GB SD Class 2<br />
** 8GB SDHC High Speed Pro Class 6<br />
* '''Hema (Dutch dept. store)'''<br />
** 4GB<br />
** 8GB SDHC Class 4<br />
* '''Goodram''' <br />
** 8GB microSDHC Class 4<br />
** 16GB microSDHC Class 4 (SDU16GHCAGRR10)<br />
** 16GB SDHC Class 10<br />
* '''HP'''<br />
** 8GB SDHC Class 4 (doesn't reboot during first time startup process, but restart again and fine after that).<br />
** [http://www.amazon.com/HP-CG790A-AZ-Flash-Memory-Class/dp/B007X7U224 32GB SDHC Class 10] <br />
* '''ICIDU'''<br />
** 4GB SDHC Class 10 (also had no issues)<br />
** 16GB SDHC Class 10 (image write had issues, might be my inexperience. It boots & shows Xserver)<br />
** 32GB SDHC Class 10 (had no issues whatsoever, the comment above might be a dud.)<br />
** 8GB microSDHC Class 10<br />
** 16GB microSDHC Class 10 (20MB/sec)<br />
** 32GB microSDHC Class 10 (20MB/sec)<br />
* '''Integral''' <br />
** 4GB SDHC Ultima Pro Class 10<br />
** 4GB SDHC Class 4 SD-K04G (Purple label)<br />
** 8GB SDHC Ultima Pro Class 6 (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 8GB SDHC Ultima Pro Class 10 (20MB/s) (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 16GB SDHC Ultima Pro Class 6<br />
** [http://www.amazon.co.uk/gp/product/B0047T6XME 16GB SDHC Class 10 Ultima Pro (20MB/s)]<br />
** 32GB SDHC Ultima Pro Class 10 (20MB/s) - Slow to initially boot past the Rainbow Screen.<br />
* '''Joyflash''' <br />
** 16GB SDHC Class 10 (LTSD1112016GB)<br />
* '''Kingmax''' <br />
** 4GB SDHC Class 2<br />
** 4GB microSDHC Class 4 (KM04GMCSDHC4) won`t reboot when it`s hot<br />
** 8GB microSDHC Class 4 (KM08GMCSDHC41A) won`t reboot when it`s hot<br />
* '''Kingston''' <br />
** 2GB SD<br />
** 2GB microSD (N0185-002.A00LF) + Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510)<br />
** 4GB microSD Class 4<br />
** 4GB SDHC Class 4 (SD4/4GB)<br />
** 4GB SDHC Class 10 (SD10V/4GB)<br />
** [http://img341.imageshack.us/img341/1619/dsc0253y.jpg 8GB SDHC Class 4] ([http://img833.imageshack.us/img833/2028/dsc0254br.jpg SD4/8GB]) (does not work with current build of raspbmc)<br />
** [http://img600.imageshack.us/img600/3849/dsc0251et.jpg 8GB microSDHC Class 4] ([http://img707.imageshack.us/img707/363/dsc0252ld.jpg SDC4/8GB])<br />
** 8GB SDHC Class 6 (SD6/8GB) (errors on boot, boots Debian ok, does not work with raspbmc rc2)<br />
** 8GB SDHC Class 10 (SD10G2/8GB, SD10V/8GB, ultimateX 100X, ultimateX 120X)<br />
** 16GB SDHC Class 4 (SD4/16GB)<br />
** 16GB microSDHC Class 10 (SDC10/16GB)<br />
** 16GB SDHC Class 10 (SD10G2/16GB, ultimateX 100X)<br />
** 16GB SDHC Class 10 (SD4/16GBET)<br />
** 32GB SDHC Class 10 (SD10V)<br />
** 32GB SDHC Class 10 (SD10G2/32GB, ultimateX 100X)<br />
* '''Kodak''' <br />
** 4GB SDHC Class 2<br />
** 8GB SDHC Class 4<br />
* '''Kruidvat''' <br />
** 8GB SDHC Class 4<br />
* '''Lexar''' <br />
** 4GB SDHC Class 4 (Boots consistently and no error messages in log after 1/2 hour use ) (works with Raspbmc)<br />
** 4GB SDHC Class 6 Platinum II (from [http://www.microcenter.com/single_product_results.phtml?product_id=0350735 Microcenter])<br />
** 8GB SDHC Class 4<br />
** 8GB SDHC Class 6 Premium Series<br />
** 8GB SDHC Class 6 Platinum II<br />
** 16GB SDHC Class 6 Platinum II<br />
** 32GB microSDHC HIGH-SPEED Class 10 (from [http://www.amazon.co.uk/Lexar-32GB-Micro-Speed-Reader/dp/B004BR2ZTM Amazon])<br />
** 128GB SDXC UHS-I Card LSD128CTBNA400 (from [http://www.amazon.com/gp/product/B007BZRXK2 Amazon])<br />
* '''Master'''<br />
** 16GB SDHC Class 10 [man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0]<br />
* '''Medion'''<br />
** 8GB Class 4 SDHC UK sourced (Aldi)<br />
* '''Microcenter Brand (sold in bins at checkout)'''<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0289508 8GB SDHC Class 4]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349728 8GB SDHC Class 10]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349729 16GB SDHC Class 10]<br />
* '''Mushkin'''<br />
** 16GB SDHC Class 10 (MKNSDHCU1-16GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226324]<br />
** 32GB SDHC Class 10 (MKNSDHCC10-32GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226235]<br />
* '''Mustang'''<br />
** [http://www.mustang-flash.de/Products/Flash%20Products/Secure%20Digital/SD-Card/8GB%20Mustang%20SDHC%20Card%20LeMans%2C%20Class%2010%2C%20Retail|SD8GHCCL10MU-R.html 8GB SDHC Class 10]<br />
* '''MyMemory''' <br />
** 8GB SDHC Class 10 (MYMESDH8G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-8GB-SD-Card-%28SDHC%29---Class-10 MyMemory 8GB class 10] (Latest batch not working)<br />
** 16GB SDHC Class 10 (MYMESDH16G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-16GB-SD-Card-(SDHC)---Class-10]<br />
* '''NovaTech'''<br />
** 8GB SDHC Class 10 (Integral Branded)<br />
* '''OCZ'''<br />
** 8GB SDHC Class 6 Gold Series (08110596-8GB-6) tested with Debian Squeeze (official Raspberry Pi distribution debian6-19-04-2012.zip)<br />
* '''Optima'''<br />
** 8GB SDHC Class 10 (Pro-Speed)<br />
** 8GB SDHC Class 4 - working from 2012-09-18<br />
* '''Panasonic''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 10 UHS-I (~11.2MB/s read, ~6.2MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 2 (~11.1MB/s read, ~9.7MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (~4.8MB/s read, ~4.4MB/s write, following [[RPi_Performance#SD_card]])<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PSF8GSDHC10-PC)<br />
** 8GB SDHC Class 10 LX Series (PSF8GSDHC10-PC1)<br />
** 16GB SDHC Class 10 (PSF16GMCSDHC10)<br />
** 16GB SDHC Class 10 LX Series (PSF16GSDHC10) (19.3MB/s read, 9.3MB/s write)<br />
** 16GB microSDHC Class 10 (PSF16GMSHC10) (requires recent kernel update for boot)<br />
** 32GB SDHC Class 10 (PSF32GSDHC10)<br />
** 32GB SDHC Class 10 UHS-1 (PEF32GSDHC10U1) (20.4MB/s read, 12.1MB/s write)<br />
* '''Peak''' <br />
** 4GB microSDHC Class 4 (MMBTR04GUBCA-ME) tested with Arch<br />
* '''Philips'''<br />
** 8GB SDHC Class 4 (FM08SD35B)<br />
* '''Platinum'''<br />
** 4GB SDHC Class 6<br />
** 8GB SDHC Class 6 (man:0x00006f oem:0x0000 name:SMI hwrev:0x1 fwrev:0x0)<br />
** 64GB SDCX Class 10<br />
* '''Play.com''' <br />
** 4GB SDHC Class 6 (S4E3CD04GEFAA 0907090121106)<br />
* '''PNY''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 4 Optima (SD-K04G 0834TT1297Y)<br />
** 4GB SDHC Class 4. Micro SD Card with adapter.<br />
** 8GB SDHC Class 6<br />
** 8GB SDHC Class 10. Micro SD card with adapter.<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 10 (P-SDHC16G10-GE)<br />
*** See the note for P-SDHC16G10-EF. Works with Wheezy, does not work with Squeeze, Arch, or Fedora Remix. <br />
** 16GB SDHC Class 10 (P-SDHC16G10-EF) <br />
*** Works with [http://www.raspberrypi.org/archives/1435 Debian Wheezy]<br />
*** Does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
*** Does not work with Arch Linux Arm (archlinuxarm-29-04-2012: no video is displayed, solid red power light, tiny green light)<br />
** 16GB SDHC Class 10 Pro-Elite (P-SDH16U1-30-GE). Works with raspbmc, haven't tested others.<br />
* '''pqi'''<br />
** 8GB SDHC Class 6 <br />
*** Works with official debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 (8DK52-122ME)<br />
* '''Samsung''' <br />
** 4GB SDHC<br />
** 8GB SDHC Class 6 (MB-SS8GAEU)<br />
** 8GB SDHC Class 10 (MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM)<br />
** 16GB SDHC Class 6 (MB-SSAGAEU)<br />
** 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy], but does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
* '''SanDisk''' <br />
** 2GB SD, white "SanDisk for Wii" branded, no class mentioned<br />
** 2GB SD (with a circle 2 --probably class 2), writes at 3.5 Mb/s<br />
** 2GB SD Class 2 (BE0816113150D)<br />
** 2GB SD Class 4 Ultra (15MB/s)<br />
** 2GB SD Class 4 Ultra II<br />
** 2GB SD Ultra II (BE0719111366D)<br />
** 2GB SD Extreme III (BE0715105083B)<br />
** 2GB SD Extreme III (BE0804212046D) - 20MB/s - Class 6<br />
** 4GB SDHC Class 2 (BH0820113475D) - Tested with RPITC (Based on Raspbian Wheezy)<br />
** 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 4GB SDHC Class 4 (SDSDB-004G-B35)<br />
** 4GB SDHC Class 4 (SDSDB-004G-BT35). Confirmed working with stock debian6-19-04-2012.img<br />
** 4GB SDHC Class 4 (BH1210821913G)<br />
** 4GB SDHC Class 4 (SDSDH2-004G-AC11, BH1127216239D) Costco 2-pack, booting Wheezy 2012-07-15<br />
** 4GB SDHC Class 4 Ultra (SDSDH-004G-U46) won`t reboot when it`s hot<br />
** 4GB SDHC Class 4 Ultra II<br />
** 4GB SDHC Class 6 Ultra (30MB/s BH1200421822D)<br />
** 4GB SDHC Class 6 Ultra (SDSDH-004G-U46 - BH1136121837G, BH1130521822D)<br />
** 4GB SDHC Class 10 Extreme (BH10297143382G)<br />
** 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 8GB SDHC Class 4 (writes at ~1.5MB/s)<br />
** 8GB SDHC Class 4 Ultra labelled as 15MB/s (BI1024716014G)<br />
** 8GB SDHC Class 6 Ultra <br />
** 8GB SDHC Class 6 micro - MMAGR08GUDCA-DB<br />
*** also SDSDH-008G-U46 - BI1131222083D see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
*** except SDSRH-008G-A11 could be problematic, see below<br />
** 8GB SDHC Class 6 Ultra labelled as 20MB/s (BI11321422083D)<br />
** 8GB SDHC-I Class 6 Ultra labelled as 30MB/s (SDSDH2-008G-AC11)<br />
*** requires updated Squeeze or Wheezy beta<br />
** 8GB SDHC Class 10 Extreme (BI11017514367G)<br />
** 8GB SDHC Class 10 Extreme (B11209116254G) - Managed to get it working with raspbian R3 [http://archive.raspbian.org/images/rpi_pisces_r3.zip rpi_pisces_r3.zip] however does not work with official squeeze nor Arch linux.<br />
** 8GB SDHC Class 10 Extreme (30MB/s HD Video) - working with new [https://github.com/raspberrypi/firmware/blob/9308c7ed387e5422883753f7fb71a75506abd1f8/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-10 for Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 images (BI1130916254G).<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-U46) - Works with stock debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (works with OpenELEC r11493)<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-UDQ46) - Works with stock 2012-09-18-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme (SDSDX-008G-X46/BI1218822414G) - Works with stock 2012-08-16-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-008G-X46) - Works with stock 2012-07-15-wheezy-raspbian<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 16GB SDGC Class 4 (SDSDB-016G-B35) - working with [https://github.com/raspberrypi/firmware/blob/234c19de7cbaaf4997671d61df20a05759066295/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-15 for Debian Squeeze 2012-04-19<br />
** 16GB SDHC Class 6 Ultra (30MB/s) (BL1133921933G) - Work with OpenELEC r11324<br />
** 16GB SDHC Class 10 Ultra(30MB/s) (SDSDU-016G-U46) - Work with stock debian6-19-04-2012 image. Gave Kernel Panic with stock debian6-19-04-2012 image. Worked fine with Wheezy image.<br />
** 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Works with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02)<br />
** 16GB SDHC Class 10 Extreme (45MB/s U1) (BL1203322025G) - Works with 2012-08-16-wheezy-raspbian.img (tested 2012-09-15). Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 16GB SDHC Class 10 Extreme (45MB/s) (SDSDXPA-016G-FPP) - Working with latest RaspBMC image (tested 12/09/2012) [http://www.amazon.co.uk/gp/product/B00422J0CG/ref=oh_details_o00_s00_i00 Amazon Link]<br />
** 16GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-016G-A75) - Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 32GB SDHC Class 4<br />
** 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 32GB SDHC Class 6<br />
** 32GB SDHC Class 10 Ultra (30MB/s) - Works with stock debian6-19-04-2012 image<br />
** 32GB SDHC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-032G-X46) - works with arch-04-29-image and latest firmware (booting problems without firmware update)<br />
** 64GB SDXC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-064G-X46) - works with 2012-07-15-wheezy-raspbian<br />
** microSDHC / microSDXC<br />
*** 4GB microSDHC Class 2<br />
*** 4GB microSDHC Class 4<br />
*** 8GB microSDHC Class 2<br />
*** 8GB microSDHC Class 4<br />
*** 8GB microSDHC Class 6 Mobile Ultra (SDSDQY-008G-U46A) working with the latest firmware, won`t reboot when it`s hot<br />
*** 8GB microSDHC Class 10 Ultra(30MB/s) (SDSDQU-008G-U46) tested and working on Raspbian wheezy (and RaspBMC)<br />
*** 16GB microSDHC Class 10 Mobile Ultra (SDSDQUA-016G-U46A) working with the latest firmware<br />
*** 32GB microSDHC Class 4 (SDSDQM-032G-B35)<br />
*** [http://img217.imageshack.us/img217/6435/dsc0255uc.jpg 64GB microSDXC Class 6 Mobile Ultra] (SDSDQY-064G-A11A) (boots up much more consistently with latest firmware)<br />
* '''Silicon Power''' <br />
** 4GB microSDHC Class 6 (SP004GBSTH006V10-SP)<br />
** 8GB microSDHC Class 10 (S608G1202)<br />
** 16GB microSDHC Class 10 (SP016GBSDH010V10)<br />
* '''Sony'''<br />
** 4GB SDHC Class 4 (SF-4B4) (Write 6MB/s, Read 20MB/s)<br />
** 4GB SDHC Class 4 (SF-4N4)<br />
** 8GB SDHC Class 4 (Write 11.8MB/s, Read 17.4MB/s)<br />
** [http://store.sony.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&partNumber=SF32NX/TQ#features 32GB SDHC Class 10 (SF-32NX/TQ)] (Max read speed of ~94MB/s, min write speed of ~10MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012) <br />
* '''Strontium'''<br />
** 8GB SDHC Class 10 (SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492))<br />
* '''Super Talent'''<br />
** 32GB Secure Digital High Capacity SDHC Card (Class 10), Model SDHC32-C10 SKU: 116-557-001 (works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian))<br />
* '''TakeMS'''<br />
** 4GB microSDHC Class 4 (with adapter) [http://www.takems.com/products.php?categ=flash&prod=Micro_SDHC-Card Micro SDHC Class 4 + 1 Adapter(Order No.88662)]<br />
* '''TDK'''<br />
** 4GB SDHC Class 4 (1008WW5261B)<br />
** 4GB SDHC Class 4 (80-56-10275-004G,Debian works '''BUT''' mmc0 errors when booting Fedora)<br />
** 4GB microSDHC Class 4 (80-56-10301-004G)<br />
** 4GB SDHC Class 6 (S404G1113) - Works with Debian Wheezy (2012-06-18 beta), not tried latest OpenELEC yet.<br />
** 8GB SDHC Class 10 - Works with Raspbian 2012-07-15<br />
** Sandisk 64GB Class 10 Ultra SDXC UHS-I FFP (3A114807)<br />
<br />
* '''Toshiba'''<br />
** 8GB mircoSDHC SD-C08GJ(BL3A<br />
** 16GB SDHC Class 10 SD-T16G (1046 US7022 C)<br />
* '''Transcend'''<br />
** 4GB SDHC Class 4 - we've found these to work without any errors and offer reasonable performance<br />
** 4GB SDHC Class 4 (TS4GSDHC4 - BH1130821915G)<br />
** 4GB SDHC Class 6 (TS4GSDHC6) - no problems. (does not work with Raspbmc as of 6/1/12)<br />
** 4GB SDHC Class 10 (TS4GSDHC10E)<br />
** [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-(SDHC)---Class-4 8GB SDHC Class 4] (TS8GSDHC4) (man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions.<br />
** 8GB SDHC Class 6 (~5.8 MB/s read/write following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (TS8GSDHC6-P2 - MMBFG08GWACA-M6)<br />
** 8GB SDHC Class 10 (TS8GSDHC10) [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-%28SDHC%29---Class-10- Transcend 8G class 10]<br />
** 16GB SDHC Class 6 (TS16GSDHC6)<br />
** 16GB SDHC Class 10 (TS16GSDHC10)(TS16GSDHC10E)<br />
** [http://www.transcend.com.es/tarjetas-de-memoria/sd-sdhc/32gb-sdhc-class-10 32GB SDHC Class 10] (TS32GSDHC10)(TS32GSDHC10E)<br />
** 64GB SDXC Class 10 (TS64GSDXC10)<br />
* '''Verbatim'''<br />
** 8GB SDHC Class 10 (43961)<br />
** 16GB SDHC Class 10 (43962)<br />
** 32GB SDHC Class 6 (44032)<br />
<br />
*'''Traveler'''<br />
**4GB High Speed Memory Card - no class mentioned. No problems. Tested with Raspbian.<br />
<br />
* '''The Pi Hut'''<br />
** Sandisk 4GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 8GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 16GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 32GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''V-Gen'''<br />
** 8GB microSDHC - no class mentioned. No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc. <br />
<br />
* '''Veho (http://www.veho-uk.com)'''<br />
** 8Gb "Ultra Fast" Class 6. (man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux.<br />
<br />
* '''W Photo (Walgreens photo)'''<br />
** 1GB SD memory card. Works with raspbmc, have not tested others.<br />
** 2GB SD memory card. Works with raspbian, not tested with others.<br />
<br />
Known good (and pre-loaded) cards will be available for sale from RS and element14 at a ''later'' date (TBA).<br />
<br />
===Problem SD Cards===<br />
<br />
Make sure that you buy your card from a reliable source. There are many cheap Chinese copies of (brand name) SD-Cards on the market, [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit/] in addition they are often mislabeled as having greater capacity than they really have. For example they might be sold as being 4GB, but are actually 2GB (or even less). <br />
<br />
There were initially issues with most Class 10 SDHC cards, apparently due to a bug in the Broadcom bootloader.[http://www.raspberrypi.org/forum/general-discussion/class-10-sd-cards-on-the-production-boards/page-3/#p39181]<br />
<br />
This seems to have been fixed in sdhci.c: [https://github.com/raspberrypi/linux/commit/7e8ae226fe6e95954df6b0dcdde40a53dbbc1a0b] Further feedback will be useful.<br />
<br />
If you add an SD card here, please also mention the kernel date and the date you tried it. This allows people to estimate how likely it is that a driver-fix in the kernel has been fixed. (i.e. I think some/most of the cards here work fine now, because a problem in the kernel driver has been fixed). <br />
<br />
* '''Acumem'''<br />
** 8GB SDHC Class 6 (many errors on 6/7/2012)<br />
* '''Adata'''<br />
** 2GB Speedy (MMAGF02GWMCA -NA)<br />
** 8GB SDHC Class 6 - Sometimes boots<br />
** 16GB SDHC Class 6 (Possibly SD5MY168G0, label with gold <> black gradient) - Doesn't boot<br />
* '''Agfa'''<br />
** 16GB MicroSDHC class 6 (as written on SD-Adapter, MicroSD card itself no-name? ENAAJK121960): mixed results, such a card was working on another RPi<br />
* '''Amazon Basics'''<br />
** 16GB SDHC Class 10 (many errors on 6/7/2012)<br />
* '''Delkin Devices'''<br />
** 4GB SDHC Class 6 "Delkin pro" -- Note: works with Fedora Beefy Miracle 17<br />
* '''GSkill'''<br />
** 32GB SDHC Class 10<br />
* '''Integral'''<br />
** 16GB SDHC Class 6 Ultima Pro (SH016GAA2BB)<br />
** 4GB SDHC class 4 (S404G1115)<br />
* '''Kingston''' <br />
** 2GB SD [http://www.geeks.com/details.asp?invtid=KING-SD-M02G-BULK looks like this] - boots the kernel, but damages the filesystem.<br />
** 4GB SDHC Class 6 - Boots kernel but won't run init (times out)<br />
** 8GB/Go SDHC Class 10 - SD10V/8GB Very slow writing images to card and then either won't boot, or boots very slowly<br />
** 16GB SDHC Class 4 (SDC4/16GB17) - Device does not recognize it <br />
* '''Memory2GO'''<br />
** 4GB SDHC Class 6 (S404G1029) - I/O Errors leading to Kernel Panic on startup.<br />
* '''Micro Center'''<br />
**4GB SDHC Class 4 — hasn't worked with any of the images I've tried; appears to be completely unrecognized<br />
* '''MyMemory.com''' <br />
** 8GB SDHC Class 10<br />
<br />
* '''Optima''' <br />
** <del>8GB SDHC Class 4 - Does not boot with Raspbian Wheezy 2012-07-15</del> - works with 2012-09-18 <br />
<br />
* '''Panasonic''' <br />
** 8GB SDHC Class 10 (RP-SDU08GD1K) mmc0: timeout waiting for hardware interrupt [http://www.mymemory.co.uk/SDHC/Panasonic/Panasonic-8GB-UHS-1-London-2012-Collection-SDHC-Card---Class-10 Panasonic 8GB Class 10]<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PS8GSDHC10-BC) - repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian<br />
** 8GB SDHC Class 10 (PSF8GSDHC10)<br />
** 8GB SDHC Class 10 (PSF8GSDHC10-PC) - won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc.). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore).<br />
* '''Platinum''' <br />
** 8GB SDHC Class 8 (O08G840 M3100487 TW)<br />
** 16GB SDHC Class 10 (article code 177117) - Does not boot with Raspbian Wheezy 2012-09-12<br />
* '''PNY'''<br />
** 8GB Optima SDHC 120 HD Class 4 SD-K08G 0928 WF3673 - mmc -110 errors at init time on 6/12/12<br />
** 8GB Premium SDHC Class 4 - mmc - mmc0: timeout waiting for hardware interrupt<br />
** 32GB SDHC Class 10 Professional (P-SDHC32G10-EF) from [http://www.play.com/Electronics/Electronics/4-/18814903/-/Product.html play.com] (mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)<br />
** 2GB card SD-M02G<br />
* '''Polaroid'''<br />
** 16GB SDHC C10 (P-SDHC16GB10-EFPOL) - mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 233x - mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic, ...<br />
* '''Reekin'''<br />
** 4Gb HighSpeed SH4GC6M16MIN9C0812TE (old) don't boot ! (11/07/2012)<br />
* '''Samsung'''<br />
** 4GB SDHC Class 4 (MB-SS4G MBSS4GMBDDBA-DD) doesn't boot with [http://downloads.raspberrypi.org/images/raspbian/2012-07-15-wheezy-raspbian/2012-07-15-wheezy-raspbian.zip 2012-07-15-wheezy-raspbian] - OK light partially lit.<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt), but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy]<br />
* '''SanDisk''' <br />
** 2GB SD Extreme III (BE0722702998D) (man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)<br />
** 2GB SD (BE0916214253D)<br />
** 2GB Ultra || 15MB/s (BE0828713280D)<br />
** 4GB SDHC Class 2 - Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt.<br />
** 4GB SDHC Class 2 "Limited Edition" (8H825413279G) - Error -110 whilst initialising sd card<br />
** 4GB SDHC Class 4 (BH1030216016G) - Doesn't boot.<br />
** 4GB SDHC Class 4 (BH1031116016G) - Doesn't boot.<br />
** 4GB SDHC Class 6 Extreme (BH0822411730D)<br />
** 4GB SDHC Class 6 Extreme III (30 MB/s) (BH0822712362G)<br />
** 4GB SDHC Class 10 Extreme (SDSDX-004G-X46) (30 MB/s HD Video) doesn't boot (also not with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta)<br />
** 4GB SDHC Class 10 Extreme (30 MB/s HD Video) (Doesn't boot) - Works with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot]<br />
** 4GB microSDHC Class 6 Mobile Ultra (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found<br />
** 8GB SDHC Class 6 Ultra (B11201421964G)<br />
** <del>8GB SDHC Class 6 Ultra (SDSDH-008G-U46 - BI1131222083D) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )</del> see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s (BI1208721965G)) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSRH-008G-A11 - Boots kernel but won't run init ( mmc timeout waiting for interrupt ) <br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSDH-008G-T11 - Boots kernel but won't run init ( debian6-19-04-2012: mmc timeout waiting for interrupt ) , but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy] on 6/22/12<br />
** 8GB SDHC Class 6 Ultra I (BI1201221964G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Extreme (BI1101116253G)<br />
** 8GB SDHC Class 10 Extreme (BI1108716254G)<br />
** 8GB SDHC Class 10 Extreme (BI1201416254G) - Still doesn't work with Debian Wheezy beta (2012-06-18)<br />
** <del>8GB SDHC Class 10 Extreme (BI1201516254G) [[http://www.amazon.co.uk/gp/product/B00422FBJ2 amazon.co.uk]]+amazon.fr</del> works with wheezy 19/09/2012<br />
** 8GB SDHC Class 10 Extreme (BI1200916252D/SDSDX-008G-X46) - Tried with Debian "Squeeze"(19/04/2012), Debian "Wheezy"(18/06/2012) and Arch Linux(13/06/2012). None works. With Debian "Wheezy" Green LED stays ON continuously, with the other two it turns on very faint.<br />
** 8GB SDHC Class 10 Extreme Pro- Works with updated kernel/firmware, stock debian6-19-04-2012 boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** <del>16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Doesn't boot with debian6-19-04-2012.img, or newer firmware (tested 2012-06-17).</del><br />
** 16GB SDHC Class 6 Ultra (BL1202021933G)<br />
** 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
* '''Silicon Power''' <br />
** 32GB SDHC Class 6 (LS2N732GQON03ASP) - boots debian6-19-04-2012.img, but frequent slow response / system hangs.<br />
<br />
* '''TDK'''<br />
** 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot] but still won't run init.<br />
** 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried (4th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github [https://github.com/raspberrypi/firmware/tree/87a04c0be0c05e20f94f223183a0310b37c9bd89/boot] but still got 'Error -84' and 'Kernel panic - not syncing: No init found'<br />
<br />
* '''Transcend'''<br />
** 2GB MicroSD (MMAGR02GUECA-MB) - reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots.<br />
** 32GB MicroSD (TS32GUSDHC4) - Doesn't boot.<br />
** 2GB SD (6451AG 2G O2DS1)<br />
** 16GB SD Class10 (TS16GSDHC10U1) - Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"<br />
* '''Veho'''<br />
** 4GB SDHC Class 6 <br />
* '''Verbatim'''<br />
** 16GB SDHC Class 6 (47178) - Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt<br />
** 8GB microSD Class 10 (44012) - ArchLinux - boots, but after system update develops segmentation faults<br />
<br />
The usual warnings against less reputable sellers (such as Ebay merchants) apply.<br />
<br />
<br />
Note that the following error is sometimes accompanied with a non-working SD card after booting (on Debian):<br />
<br />
mmc0: timeout waiting for hardware interrupt<br />
<br />
=== Benchmarks ===<br />
<br />
* http://www.sakoman.com/OMAP/microsd-card-perfomance-test-results.html<br />
* http://usbspeed.nirsoft.net/usb_drive_speed_summary.html?o=11<br />
* http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076<br />
* http://forum.xda-developers.com/showthread.php?t=1005633 (Doesn't originate from R-Pi, but very related)<br />
<br />
== Foreign Language Translations ==<br />
* [[Ru:RaspberryPiBoardVerifiedPeripherals]]<br />
<br />
== References ==<br />
<references><br />
</references><br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426https://elinux.org/index.php?title=RPi_VerifiedPeripherals&diff=180656RPi VerifiedPeripherals2012-10-14T01:44:52Z<p>Lob0426: /* Working USB Wifi Adapters */</p>
<hr />
<div>[[Category: Linux]]<br />
[[Category: ARM Development Boards]]<br />
[[Category: Broadcom]]<br />
[[Category: Development Boards]]<br />
[[Category: RaspberryPi]]<br />
[[Category: Education]]<br />
{{Template: RPi_Hardware}}<br />
<br />
<br />
'''A note about this page: For USB devices, please specify if they required a powered hub'''<br />
==Notes==<br />
<br />
19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the [http://www.raspberrypi.org/downloads default Debian distribution] unless stated otherwise. A suggested suffix markup scheme is as follows:<br />
<br />
* (A) - Relates to model A production board<br />
* (B) - Relates to model B production board<br />
* (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different<br />
* No markup - relates to all production boards<br />
<br />
''Discuss: [http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247 http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247]''<br />
<br />
If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order.<br />
<br />
==Power Usage Notes==<br />
{{Warning|Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the RPi. If the RPi's supply voltage falls below a certain value (anecdotally stated as around 4.75V), or it begins to fluctuate, your setup may become unstable. There is a [http://elinux.org/RPi_Hardware#Power Wiki section about this issue] which is worth a read.}}<br />
<br />
'''Model B Hardware Revisions and USB Power limits'''<br />
'''Hardware Revision 1.0'''<br />
The original Model B board had current limiting polyfuses which limited the power output of each USB port to approximatly 100mA. USB devices using more than 100mA had to be connected via a powered hub. The PI's PSU was chosen with a power budget of 700mA of which 200mA were assigned to the USB ports, so the Raspberry Pi's (poly)fuses were designed only for devices up to 100mA, and typical 140mA polyfuses will have as much as 0.6 volt across them when drawing currents near the 100mA limit. As a consequence the USB ports are only directly suitable for "single current unit" USB devices which, according to USB specifications, are designed to work with just 4.4 Volt. Not only do non single current unit devices draw more current (causing greater Voltage drops, and greater stress on the fuses), they also might require 4.75 Volt to work.<br />
<br />
'''Model B Hardware Revision 2.0 and Revision 1.0 with ECN0001 change'''<br />
This had the polyfuses removed, removing the 100mA current limitation for each USB port (but leaving the main fuse F3 intact). Users should still ensure their power supply can power the RPi and the USB peripherals. Revision 2.0 was released in August 2012.<br />
<br />
==Linux Driver Issues==<br />
Shortly after the Raspberry Pi was released it was it was confirmed that there were a number of issues with the Linux USB driver for the SMSC95xx chip. These included problems with USB 1.x peripherals that use split transactions, a fixed number of channels (causing problems with Kinect) and the way the ARM processor handles the SMSC95xx interrupts. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097&start=76] [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=5249&start=44]<br />
A large number of fixes were included in the 2012-08-19-wheezy-raspbian Linux image.<br />
<br />
== Powered USB Hubs ==<br />
A number of low-cost powered USB hubs are known to have caused problems. Members of the Raspberry Pi forums have reported low power or no power at all in some cases. The following is a list of specific Powered USB Hubs which appear to be fault-free. Please note that these do not take into account powering the Raspberry Pi from the hub, in addition to its peripherals.<br />
<br />
If you use a powered hub and PI PSU together consider powering them from the same power bar with switch, so you can turn them on simultaneously., especially if the HUB tries to feed the PI through their interconnect cable, due to the 100mA limiting fuse in the PI the PI will be partially powered which may cause problems (unwanted writes to the SD card).<br />
<br />
===Working USB Hubs===<br />
*'''Acme'''<br />
** USB 2.0 hub 4 port ([http://www.acme.eu/en-us/product/019188 ACME]) Based on NEC μPD720114 USB2.0 Hub Controller USB ID 0409:005a '''NOTE!''' It is bus-powered hub, but very cheap and small and works after a small modding: on usb-hub board you have 4 holes: V, D+, D- and GND. Connect GND, D+ and D- to the RasPI, and additionally connect GND and +5v from power supply to the same holes on usb-hub GND and V. Now there is common contacts: GND, D+ and D- between RasPI and hub needed to work, and additional power for USB devices, connected to the hub. Tested on my RasPI.<br />
*'''Belkin'''<br />
** F4U040 4-Port Ultra-Slim Desktop hub (powered 5v, 2.6A, lsusb lists as Genesys Logic 05e3:0608)<br />
** F5U224 4 port powered USB hub<br />
** F5U231/F5U234 Hi-speed USB 2.0 Tertrahub - 4 port powered USB hub (verified.. able to power Raspberry Pi using micro USB directly from hub)<br />
** F5U237 7 Port powered USB 2.0 5V 3.8A (5 back port 2 top ports)<br />
** F5U259-ME USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time)<br />
** F5U403 USB 2.-0 4 Port Hub (Powered, suspect see F5U404 in non-working, didn't test power the RPi from hub.)<br />
** F5U700 USB 2.0 7-Port Hub (Powered, able to power Raspberry Pi via micro USB directly from hub)<br />
** F5U706ea/uk 2-in-1 Hub (USB 2.0, powered, 7-port)<br />
** F5U706701PerBlk 7-in-1 Hub (USB 2.0, powered 5V 2.5A , 7-port)<br />
** F4U039qukAPL 7 port Ultra-Slim Desktop Hub (internally two Genesys Logic 05e3:0608 devices - powering RPi from port furthest away from power supply. Toshiba Stor.E 1TB must be powered from ports closest to the power supply to avoid errors in dmesg. Flash drives seem fine on ports away from the power supply.)<br />
*'''Benq'''<br />
** E2220HD LCD Monitor with 4 port USB Hub. Able to power the Pi and no backfeed of power from the monitor to the Pi via the interconnect. Just works.<br />
*'''Biltema'''<br />
** 23-924 4-port powered USB 2.0 Hub (2.0A) Able to power Raspberry Pi via USB port<br />
*'''CyberPower'''<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817804002] CP-H720P 7-port powered hub with 3.6A adapter. Internally, a NEC Corp 0409:0050 device. Works perfectly with Model B, regardless of whether the RPi is being powered by the hub or externally.<br />
*'''Dell'''<br />
** Dell 2001FP monitor has 4 USB ports and acts as a powered hub.<br />
** Dell SP2309W monitor has 4 USB ports and acts as a powered hub.<br />
** Dell 2407FWP monitor has 4 USB ports and acts as a powered hub. Additionally, the 6-in-1 Card Reader part of the monitor works as well, though it will not read SDXC Cards.<br />
** Dell U3011 monitor has 4 USB ports and acts as a powered hub. Additionally, the Card Reader part of the monitor works as well, and is compatible with 128GB SDXC Lexar Brand Cards <br />
*'''DELTACO'''<br />
** [https://www.deltaco.se/products/items/itemid/(UH-715)/index.aspx UH-715 Rev 2] 7-port powered hub with 2A adapter.<br />
*'''DYNEX'''<br />
** 7port hob idVendor=0409, idProduct=0050 works<br />
*'''D-Link'''<br />
** [http://www.amazon.com/D-Link-DUB-H7-High-Speed-7-Port/dp/B00008VFAF] 7-Port USB Hub DUB-H7 (See note below - doesn't work for all, apparently). Working model marked BUBH7A....A5. Worked with Debian on production B model, for keyboard, mouse, and thumb drives, also worked with ArchLinux, didn't work with Bodhi Linux immediately thereafter. Recent model did not work with default raspbian firmware (3.1.9+ #272); updated firmware with rpi-update (to 3.2.27+ #66), now seems to work perfectly.<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817111131] 4-Port USB Hub DUB-H4 Worked on Debian with keyboard, mouse, and thumb drive. Also tested with Raspbmc and external HD (powered through USB). While the hub has a charging port, which should be able to provide power enough to the RasPi (1.2 A), connecting the RasPi here doesn't work, as it seems the power is cut during boot (At least with hub hardware rev. C1). While it does boot from any of the other ports, it shouldn't be used it doesn't provide enough power (Standard 500 mA per port. Measuring at P1-P2 on the RasPi: ~4.45 V).<br />
*'''Digicom'''<br />
** [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MiniHubUsb204P#] MiniHUB 4-Port USB 2.0 with PSU 5V - 2A .<br />
*'''Digitus'''<br />
** 7-port USB2.0 Powered Hub. Model DA-70226.<br />
*'''Eminent'''<br />
** [http://www.eminent-online.com/en/product/22/em1102-4-port-usb-hub---black.html] EM1102 4 Port USB 2.0 Hub with 1A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
** [http://www.eminent-online.com/en/product/27/7-port-usb-2-0-hub.html] EM1107 7 Port USB 2.0 Hub with 2A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
* '''GearHead'''<br />
** [http://www.amazon.com/gp/product/B004OBZ088/] GearHead 4 Port Hub with Energy Saving Power Switch (5V, 1A)<br />
*'''Gembird'''<br />
** Gembird UHS 242 4-port USB 2.0 Hub 1.8 Amps<br />
* '''Genesys Logic (sold at Fry's)'''<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0608) (Other brands include Gigaware and Belkin, same ID shows up in lsusb)<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0606) (Other brands include i-Rocks, same ID shows up in lsusb)<br />
* '''Hama'''<br />
** Hama 4-way USB 2.0 Hub<br />
*'''HP'''<br />
** HP ZR2240w 21.5" Monitor with built in 2-Port USB Hub (B)<br />
*'''Laser'''<br />
** "7 port USB hub with AC adapter Version 2.0". 5V 1A (found at Harvey Norman Australia for $24.95 and Australia Post Shops for $9.95). You can power the PI by connecting both the main USB connector to the PI USB port, '''and''' from a spare USB port back to the power micro USB socket. If you don't do both, boot-loops are likely to occur.<br />
*'''Logik'''<br />
** [http://www.currys.co.uk/gbuk/logik-lp4hub10-4-port-powered-usb-hub-04979038-pdt.html] LP4HUB10 4-Port USB Hub. '''Throws errors when used with Fedora remix 14'''<br />
** Logik L4THUB10 4 Port powered hub works fine under raspbian/wheezy/model B. Captive usb cable, 2A power supply, convenient single top mounted usb socket. Unlike my last hub, will power wifi!<br />
*'''LogiLink'''<br />
** UA0085 USB 2.0 Hub, 4-Port with PSU 5V, 2A<br />
** UA0091 USB 3.0 Hub, 4-Port with PSU 5V, 4A. Connected with USB2.0 cable. 1A per port, able to support USB HDD drives and other power hungry devices. Tested with kernel 3.1.9-cutdown, Wheezy. <br />
** UA0096 USB 2.0 Hub, 10-Port with PSU 5V, 3.5A (Not suitable for powering RPi because it doesn't work unless there is working USB input present even with PSU plugged in.)<br />
** UA0160 USB 2.0 Hub, 4-Port with PSU 5V, 2A. Able to power the RPi, keyboard, mouse and LogiLink UA0144 USB ethernet adapter. (More testing to come.)<br />
* '''Manhattan'''<br />
** [http://manhattan-products.com/en-US/products/6500-hi-speed-usb-2-0-micro-hub] (#160612) Hi-Speed USB 2.0 Micro HUB, AC Powered (identifies as ID 05e3:0608 Genesys Logic) Includes a 1000mA wall-wart (US style)<br />
*'''Newlink'''<br />
** NLUSB2-224P 4 port USB 2.0 Mini hub with PSU 5V 1A<br />
*'''Nilox'''<br />
** Nilox USB 2.0 4port HUB model HUB4USB2AC with PSU 5V 1.0A <br />
* '''Plugable'''<br />
** [http://plugable.com/products/USB2-HUB4BC/] USB2-HUB4BC 4 Port USB 2.0 Hub with BC 1.1 Fast Charging. 5V 2.5A power supply. Powering Pi via microUSB from a hub port. USB Audio peripheral tested and working.<br />
* '''Pluscom'''<br />
** Pluscom 7 Port USB 2.0 Hub Model U7PH-3A with 3Amp PSU. USB ID 1a40:0101. Powering Pi via microUSB from a hub port. Internally two 4 Port switches linked. Leaks power back up USB data cable to Pi but not really a problem when powering Pi at the same time.<br />
*'''Staples (Business Depot) (Bureau EN GROS)'''<br />
** Staples 4-port hub Item 607477-CA<br />
*'''StarTech.com'''<br />
** StarTech.com 7-port Compact USB 2.0 Hub (ST7202USB). Comes with 5v 2A supply. Shows in lsusb as two Genesys Logic, Inc. USB-2.0 4-Port HUBs (05e3:0608). Back powers Pi (Just, Voltage across TP1 & TP2 is a little low when powered from this hub).<br />
*'''SumVision'''<br />
** Sumvision Slim 4 Port High Speed USB 2.0 HUB with PSU 5V 1.0A (from [http://www.7dayshop.com/catalog/account_history_info.php?page=1&order_id=5130107 | 7dayshop ])<br />
*'''Sitecom'''<br />
** CN-032 4 Port USB 2.0 Pocket Hub. Works for powering the Pi, an USB WLAN Adapter, wireless Kbd+Mouse. Using an 2500 mA Voltcraft <br />
** CN-060 4 Port USB 2.0 Hub powered with AC Adapter (1A). Powering Pi via microUSB from a hub port.<br />
*'''Sweex'''<br />
** US014 4 Port USB 2.0 Hub<br />
*'''Targus'''<br />
** ACH81xx 7-port powered hub. 5V 3A power supply, with 2 high power ports. (possible conflicting behaviour with USB keyboard / Wifi Dongles)<br />
** ACH63EU 4-port. Using a 5V 2A power supply, which isn't supplied with the hub, it is able to power the PI as well.<br />
*'''The Pi Hut'''<br />
** 7 Port USB Hub (from [http://thepihut.com/products/7-port-usb-hub-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
*'''Trendnet'''<br />
** [http://www.trendnet.com/products/proddetail.asp?prod=130_TU2-700&cat=49] TU2-700 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2A)<br />
*'''Tripp-Lite'''<br />
** [http://www.tripplite.com/en/products/model.cfm?txtModelID=3167] U222-007-R 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2.5A) Powering RPi from Hub works<br />
*'''Ultron'''<br />
** [http://www.ultron.de/v1/produktansicht.php?artnr=67072&kid=bfa8340c4e245...&l=en&WGType=Neue+USB-HUBS] UHN-710 7-port powered hub with PSU 5V, 3A. USB ID 1a40:0201.<br />
*'''VANTEC'''<br />
** 4 Port USB 2.0 Powered Hub Model: UGT-MH304. 5V 2A AC/DC adapter. Go 2.0 Mini hub.<br />
*'''Z-TEK'''<br />
** Z-TEK 7-port powered hub with PSU 5V, 4A. USB ID 1a40:0201.<br />
*"Unknown"<br />
** 10(7-4) port hub idVendor=1a40, idProduct=0201 / idVendor=1a40, idProduct=0101 works<br />
<br />
===Problem USB Hubs===<br />
<br />
Please check known workarounds [http://elinux.org/Rpi_USB_check-list here] before adding to the list<br />
<br />
*'''Addon'''<br />
** 7-Port Powered Hub - labelled ADDUH070P - Gives constant Eth0 errors on boot.<br />
*'''Belkin'''<br />
** 7-Port Powered Mobile Hub - device labelled F4U018, packaging labelled F5U701. lsusb reveals it to be two Genesys Logic 4-port hubs based on the GL850G chipset (vendor: 0x05e3 product: 0x0608) ganged together. Yields a lot of "handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" errors and device resets in /var/log/messages. Low speed devices such as keyboards work OK, wifi/mass storage is unreliable or broken. -- No error messages with the latest kernel, but still unstable with mass storage devices. Also, leaks current back to the Pi (can be fixed by overtaping GND and +5V pinouts)<br />
** F4U022 7-Port powered USB hub (powered 5v, 2.6A), same as F4U018<br />
** 7-Port Powered Hub - device labled F5U237 Rev.3 - ID 050d:0237 Wired ethernet fails to connect; gives "DWC OTG HCD URB enqueue failed adding QTD. Error status -4008" Result is same as DUB-H7 below.<br />
** F5U404 Hi-Speed USB 2.0 4-Port Mobile Hub. Faulty/bad design; Leaks current back up the cable to the Raspberry Pi.<br />
** F5U307 Hi-Speed USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time) It work's sometimes. (Works always without powering the RPi, haven't tried that)<br />
<br />
*'''Dell'''<br />
** Dell U2410 Monitor Built-in 4 Port Hub - Shows up as a pair with 0424:2514 and 0424:2640. Standard Microsystems Corp. USB 2.0 Hub. When connecting some devices it kills the Ethernet with "smsc95xx 1-1.1:1.0: eth0: Failed to read register index 0x0000011X" errors. It did work for a keyboard and webcam. Bluetooth that works connected directly to the Pi triggers the error.<br />
<br />
*'''DELTACO'''<br />
** 7-Port USB Hub UH-713 Rev 3. This one consists also of two 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUBs connected together. The power supply is rated at 5 V 2 A. It kills ethernet when X11 is started.<br />
<br />
*'''Dynex'''<br />
** 7-Port USB Hub - Does not work in Debian 19-04 image.<br />
** DX-HB7PT 7-Port USB Hub - As per the Gear Head below, it's 2 daisy-chained Genesys Logic 05e3:0608 devices. Appears to result in significant slow downs when the USB is under load, such as running the root filesystem from a USB drive.<br />
<br />
*'''Dynamode'''<br />
** 7-Port USB 2.0 Hub (Silver and black). Feeds power back up the interconnect to the Pi causing the power LED to light on the Pi if the hub is powered on but the Pi is not. The Pi also fails to boot when powered off this hub, with or without the interconnect plugged in. Stops the network from working when connected to the Pi after booting the Pi - cannot ssh to the Pi. Best avoided. :-( Shows up in ''lsusb'' as a pair of ''ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB'' which is interesting. - Confirmed. This hub also appears unable to power an external USB drive using a y-cable as it gives the error -71 message in dmesg (when providing external power to the RPi)<br />
** 4-Port High-Speed USB 2.0 Hub (USB-H40-A2.0), came with with a 1A power supply. Leaks power to the Pi through the uplink. Doesn't work with Pi, unless the Pi is powered by a second power source. This hub is completely generic and I've seen it being sold under different brand names as well. Therefore, a picture is [http://i.imgur.com/BPZ3j.jpg included] for easy identification. <br />
<br />
*'''D-Link'''<br />
** 7-Port USB Hub DUB-H7 (Crashes USB stack, including Ethernet, when plugging / using some peripherals). (See note above, it works with some distros and/or with latest firmware)<br />
<br />
*'''E-Solution'''<br />
** 4-Port 2A Supply (Does not detect at all during boot or after boot- no messages) [IC = Alcor Micro Corp (AU6254)]<br />
<br />
*'''Fosmon'''<br />
** 7-Port USB 2.0 Hub w/ 1A Power Supply (Causes interference with other USB devices and sends enough power to light up the pi with it's Micro USB cable unplugged).<br />
<br />
*'''Gear Head'''<br />
** UH7250MAC 7-port powered hub. Internally, two daisy-chained Genesys Logic 05e3:0608 devices. Causes Ethernet instability when used under very specific circumstances, in X11.<br />
** <strike>UH5200T 4-port powered hub. As of 2012-08-16 Wheezy, if any USB 1.x device (a keyboard, for example) is plugged into this hub, Ethernet stops, and USB interrupts for other devices get dropped (keys repeating forever), etc. Occurs even if power is not attached (not a power leakage problem).</strike> Appears working after a bootloader and/or firmware update on 9/12. Also, turned out to be somewhat more specific to the combination of two particular low-speed devices.<br />
<br />
*'''Hama'''<br />
** 4-Port USB 2.0 "bus hub", model 78496 (?). Only works for low power devices (card readers?), but does not work for power hungry devices (HDD,WLAN). Doesnt boot when hub connected to RPi. The funniest thing is that RPi powers on when I plug in this hub to normal size USB port (not that small dedicated port). idVendor=05e3, idProduct=0608<br />
<br />
*'''Kensington'''<br />
** 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning keyboard, kills mouse when GUI started).<br />
<br />
*'''Inland'''<br />
** 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't, cheap unshielded untwisted wire design)<br />
<br />
*'''Logik'''<br />
** LP7HUB11 7-Port USB Hub. (Ethernet failed, slow response, in LXDE. Happened whether or not the hub's independent power supply was connected to the hub.)<br />
<br />
*'''Soniq'''<br />
** 4-Port 5V supply. Model number CUH100. (B). Appears to draw power away from the Raspberry Pi, even when the Pi has an isolated power line. Netgear WNA1100 WiFi Adapter (which is known to work in other setups is recognized, but unresponsive.<br />
<br />
*'''Targus'''<br />
** ACH115EU 7-port powered hub. 5V 3A power supply. Arduino communicates with RPi when connected directly to Pi's USB port, but it hangs soon if connected via ACH115. Also sometimes smsc95xx eth0 Failed to read register index 0x00000114 etc. errors in syslog when used.<br />
<br />
*'''TCM'''<br />
** Model 234298 s/n T634007737 powered hub. 4 ports plus card reader. 1A power supply. Model B, Wheezy raspian works ok with keyboard/mouse but problems with WiFi no connects. (insufficient power?)<br />
<br />
*'''Trust'''<br />
** 10-port USB 2.0 Hub (powered). Prevents ethernet from being recognised.<br />
** SliZe 7 port USB 2.0 Hub (powered) - Item number 17080 (Barcode 8 713439 170801). Prevents ethernet from being recognised. Keyboard sends multiple characters. <br />
<br />
*'''Unbranded / Multiple Brands'''<br />
** 7-port silver/black hub. Also sold elsewhere under brands such as 'EX-Pro', 'Trixes' and 'Xentra' -- This is ''probably'' due to an inadequate power supply. -- I replaced the terrible power supply with a very good one, kept getting "DEBUG: handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" in dmesg, with no devices plugged in to the hub (with or without the power supply in)<br />
** Generic 7-port black hub with Genesys Logic GL850A chipset<br />
** Cerulian 10 Port USB 2.0 Top Loading Hub with 2A supply (kills mouse and network port)<ref>http://www.raspberrypi.org/forum/absolute-beginners/cheap-powered-usb-hub-uk/#p76452</ref><br />
** [http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10307&cs_id=1030701&p_id=226 USB 2.0 4 PORT INT/EXT DUAL HUB BAY] -- Genesys Chipset -- idVendor=05e3, idProduct=0607 -- low speed devices worked, but strange USB failures when X session started. High speed devices such as hard drives had failures.<br />
<br />
== USB Remotes ==<br />
* ATI Remote Wonder (X10 Wireless Technology, Inc. X10 Receiver) — ID 0bc7:0004 — appears as a joystick-like 2 button mouse and a 0-9 keypad without drivers on console and X.<br />
<br />
* [http://www.amazon.com/gp/product/B005DKZTMG/ref=oh_details_o02_s00_i00 Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad (920-003070)] - keyboard and touchpad work. Have not verified multi-touch features.<br />
<br />
* [http://www.ipazzport.com/02A.html iPazzport] mini 2.4 GHz wireless keyboard and touchpad. <br />
<br />
* [http://www.ortek.com/html/pdt_view.asp?area=46&cat=152&sn=76 PKB 1800] Wireless Smart Pad ad Mini Keyboard. Pad works as mouse but not multi touch features. Keyboard works.<br />
<br />
* [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] '''Rii''' Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]. Working perfectly, just plug & play.<br />
<br />
* [https://www.google.com/search?q=tranksung+TS-Y150 Tranksung TS-Y150] USB RF Keyboard and air mouse (B)<br />
<br />
* [http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6753651&CatId=3680# Exo Ultra U12-41310 Mini Keyboard] Bluetooth Adapter, Touchpad, Laser Pointer, Presentation & Multimedia Controls work perfectly but need a little love and config for make it work.[https://github.com/thunderbirdtr/rs-pi-exo-keyboard Exo Installer script]<br />
<br />
== USB Keyboards ==<br />
USB keyboards that present themselves as a standard HID (Human Interface Device) device should work. '''Please be aware that some of these keyboards were probably used with a powered hub'''<br />
=== Working USB Keyboards ===<br />
The following is a list of specific keyboards known to work and which appear to work fault-free.<br />
<br />
* '''A4 Tech'''<br />
** Model KL-5 USB Keyboard, 20mA.<br />
<br />
* '''ABS'''<br />
** M1 Heavy Duty Professional Gaming Mechanical Keyboard (B)<br />
<br />
* '''Action Star'''<br />
** ACK-5010U Mini Keyboard And Mouse<br />
<br />
* '''Accuratus'''<br />
** KYB-Toughball-HI<br />
<br />
* '''Acer'''<br />
** KG-0917 Wireless Keyboard And Mouse Bundle (B)<br />
** KU-0906 Compact Keyboard (B) (Also known as Genius LuxeMate i200 Keyboard)<br />
** SK-9625 Multimedia Keyboard (B) (multimedia functions not tested)<br />
<br />
* '''Adesso'''<br />
** [http://ergoprise.com/product_images/j/699/ADP-PU21_big__14173_zoom.jpg PS/2 to USB Adapter] ADP-PU21, 100mA (tested only with keyboards) Any PS/2 keyboard will work only if it will work with a reduced operating voltage.<br />
** Model AKB-410UB. Keyboard with Touchpad.<br />
<br />
* '''Apple''' (Apple keyboards that have USB ports require an external powered hub to work, and do not work on the PI directly!)<br />
** [http://upload.wikimedia.org/wikipedia/commons/thumb/e/ea/Apple_iMac_Keyboard_A1243.png/800px-Apple_iMac_Keyboard_A1243.png Apple Keyboard with Numeric Keypad (aluminium/wired) A1243]<br />
** [http://upload.wikimedia.org/wikipedia/commons/8/81/Apple_Keyboard_A1242.jpg Apple Keyboard (aluminium/wired) A1242]<br />
<br />
* '''Asda'''<br />
** Basic Wired Keyboard HK2026 (B)<br />
** Basic Wired Keyboard HK3014<br />
*** (Please note when I put this keyboard through Newlink USB hub, it didn't work as expected)<br />
** Premium Wireless Keyboard (white keys, silver back) HK8028<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''Asus'''<br />
** KS-631U (comes with Asus Vento KM-63 keyboard/mouse set, not using powered hub) (B)<br />
<br />
* '''BTC - Behavior Tech Computer Corp.'''<br />
** Wired Portable Keyboard Model 6100 US (86+9 keys)<br />
*** Works with or without a powered hub<br />
** Wireless Multimedia Keyboard with build in pointer/mouse Model 9029URF III (86+17 keys) (B)<br />
** [http://www.btc.com.tw/english/2-7-07keyboard.htm Wired Multimedia keyboard 6311U/6310U] - rated at 5V/100mA, works directly<br />
<br />
* '''Bush'''<br />
** Wired Slimline Keyboard KU-0833<br />
*** This does not require a USB hub in order to work with the Raspberry Pi<br />
*** In the UK, it is available from Argos for £9.99<br />
<br />
* '''Cerulian''' <br />
** Mini wireless keyboard and mouse deskset (B)<br />
<br />
* '''CD Training''' <br />
** [http://www.cd-training.fr/?&feed=product&product_id=308 Wireless Combo Keyboard and Mouse (SolClavGlos)]<br />
<br />
* '''Cherry'''<br />
** CyMotion Master Linux (B)<br />
** RS 6000 USB ON<br />
** G84-4100PTMUS (B) (Compact keyboard. Rated 100mA. Works directly in Pi)<br />
<br />
* '''Compaq'''<br />
** Compaq Internet Keyboard KU-9978 (049f:000e). Rated 5v 100mA. Works directly connected to Pi<br />
<br />
* '''Das Keyboard'''<br />
** Model S Professional Keyboard (Built in USB hub not tested) (B)<br />
** Model S Ultimate Keyboard (Built in USB hub working) (B)<br />
<br />
* '''Dell'''<br />
** SK-8115 (B) (Rated 100mA. Works directly in pi)<br />
** L100 (B)<br />
** RT7D50 (75mA) (run "sudo dpkg-reconfigure keyboard-configuration")<br />
** KB1421 (100mA)<br />
** KB2521 (100mA)<br />
** 1HF2Y (Works directly in pi)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Delux'''<br />
** K8050<br />
<br />
* '''Digicom'''<br />
** WKEYPE01 Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
* '''Dynex'''<br />
** DX_-WKBD (60ma) (B)<br />
** DX_-WKBDSL (Hot keys not yet tested with Debian) (tested through non-powered 3 dongle usb hub) (B)<br />
<br />
* '''EAPPLY'''<br />
** EBO-013 Wireless 2.4GHz compact keyboard with touchpad. Rated <40mA works directly from Pi. eBay ref 260962010276 from Shenzen, China.<br />
<br />
* '''Emprex'''<br />
** Wireless Media Control Keyboard With Trackball 9039ARF III (Media functions untested)<br />
<br />
* '''Fujitsu Siemens''' <br />
** KB SC USB UK (!)<br />
** KB910 USB, with led light on the highest level (B)<br />
** KB400 USB US<br />
<br />
* '''GE''' <br />
** 98139 Rev.K1 (Power Keyboard) (lsusb shows it as "0b38:0010 Gear Head 107-Key Keyboard") - works without a hub (i.e. directly connected) (B)<br />
<br />
* '''Gear Head''' <br />
** KB3700TP (USB Mini Smart Touch Touchpad Keyboard) (B)<br />
** KB3800TP (Wireless Touch Mini Touchpad Keyboard with Smart Touch) (B)<br />
*** Works when plugged directly into Raspberry Pi, did not work with powered hub (could be a hub issue)<br />
** KB3800TPW (Windows Smart Touch Wireless Keyboard with Touchpad) (B)RASPBMC supported<br />
** KB4950TPW (Wireless Touch II Touchpad Keyboard) (B)<br />
** KB1500U (USB Mini Keyboard) (B)<br />
** KB5150 (2.4Ghz wireless keyboard/mouse Combo) (B)<br />
*** Works well with a powered hub<br />
<br />
* '''Genius'''<br />
** Ergomedia 700 (GK-04008/C) used without Hub<br />
** KB-06XE (K639) (B)<br />
** Slimstar 8000 wireless keyboard<br />
<br />
* '''HP'''<br />
** KG-1061<br />
** KG-0851 Wireless Keyboard and Mouse<br />
** KU-0316 (B)<br />
** LV290AA#ABA Wireless Keyboard and Mouse<br />
** PR1101U (available from Sainsbury's in the UK, £8, July 2012)<br />
** SK-2880<br />
<br />
* '''Hyundai'''<br />
** HY-K201<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Imation''' <br />
** KBD-702 Multi-media Wired Keyboard<br />
*** (works after the firmware update via [https://github.com/Hexxeh/rpi-update rpi-update] as of 06/27/2012)<br />
<br />
* '''IOGEAR'''<br />
** IOGEAR GKM561R Wireless HTPC Multimedia Keyboard with Trackball<br />
** IOGEAR GKM681R 2.4GHz Wireless Compact Keyboard with Optical Trackball and Scroll Wheel<br />
<br />
* '''iPazzPort'''<br />
<br />
* '''i.t.works'''<br />
** KC04 (direct and by usb hub)<br />
** KC Silicone (only tested directly)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''KeySonic'''<br />
** ACK-540RF (Wireless USB keyboard with built-in trackpad); works fine on Debian Squeeze plugged directly into Pi. Also works with Raspbmc with powered hub.<br />
** ACK-540RF+ (UK) WiFi keyboard inc touchpad with USB wifi dongle works fb with on model B/raspian/wheezy via powered hub<br />
** ACK-3700C<br />
** ACK-340U+(DE)<br />
** ACK-3400U (UK) mini keyboard<br />
<br />
* '''Labtec'''<br />
** [http://www.labtec.com/index.cfm/gear/details/EUR/EN,crid=28,contentid=692| Ultra-flat Keyboard]<br />
<br />
* '''Laptopmate'''<br />
** AK-98UNTN7-UBRII Laptopmate RII Touch N7 Mini Wireless Keyboard with touchpad<br />
<br />
* '''LC-Power<br />
** K1000BMW (lsusb: ID 1241:f767 Belkin; dmesg: HOLTEK Wireless 2.4GHz Trackball Keyboard) tested with Debian 6.0.4<br />
<br />
* '''Lenovo'''<br />
** SK-8825 UK (B)<br />
** Lenovo Enhanced Multimedia Remote with backlit keyboard N5902 (US)<br />
** Lenovo Mini Wireless Keyboard N5901 (US)<br />
<br />
* '''Lindy'''<br />
** 21840 (Wireless RF 2.4GHz Micro Keyboard with built-in optical touchpad/trackpad, USB); works fine on model B/raspian/wheezy - the supplied Lindy USB nano dongle transceiver plugged directly into Pi USB port.<br />
<br />
* '''Logik'''<br />
** Ultra slim keyboard LKBWSL11 (B) >> '''This is also listed under Problem USB Keyboards?'''<br />
<br />
* '''Logitech'''<br />
** Comfort Wave 450, labeled 100mA (M/N Y-U0001, P/N 820-001725, PID SC951C40001)<br />
** diNovo Mini wireless keyboard with media controls and clickpad 920-000586 (B)<br />
** diNovo Edge Keyboard, Windows edition, built-in TouchDisc track-pad, bluetooth w/ USB mini-receiver 967685-0403 (B)<br />
** Wii wireless keyboard KG-0802 (!)<br />
** C-BG17-Dual Wireless keyboard and mouse with wired USB receiver (B)<br />
** Deluxe 250 Keyboard<br />
** Internet 350 (M/N 967740-0403)<br />
** Internet Navigator Keyboard<br />
** MK120 wired keyboard and mouse<br />
** MK220 wireless keyboard and mouse<br />
** MK250 wireless keyboard and mouse (no hub needed)<br />
** MK260 wireless keyboard and mouse<br />
** MK300 wireless keyboard and mouse<br />
** MK320 wireless keyboard and mouse [http://www.amazon.co.uk/Logitech-920-002885-MK320-Wireless-Desktop/dp/B003STDQYW/ref=sr_1_3?ie=UTF8&qid=1339166178&sr=8-3]<br />
** MK350 wireless keyboard (using Unifying receiver)<br />
** MK520 wireless keyboard and mouse<br />
** MK550 wireless keyboard and mouse (B)<br />
** MX5000 Bluetooth keyboard and mouse (B) The Logitech Bluetooth dongle also does proprietary wireless so it works without Bluetooth drivers.<br />
** EX100 Cordless Desktop, Wireless Keyboard and Mouse (B)<br />
** EX110 Cordless Desktop, wireless keyboard and mouse (B)<br />
** K120 Keyboard (B)<br />
** K200 Keyboard (B)<br />
** K230 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K340 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K350 Wireless Keyboard (B)<br />
** K400 wireless keyboard with touchpad - also listed under "problematic". works for weeks with openelec and raspbian without any problems.<br />
** K520 Keyboard (B)<br />
** K700 Wireless Keyboard with Touchpad and unifying receiver<br />
** K750 Wireless Solar Keyboard (B) (Mac version works too. (B) )<br />
** LX 710 - works fine with receiver plugged directly into the RPi (accompanying mouse works fine too).<br />
** S510 wireless keyboard and mouse (B)<br />
** Ultra-Flat Keyboard (M/N Y-BP62A P/N 820-000245 PID SY126UK)labelled 100 mA. OK direct into Model B RPi.<br />
** G19 Gaming Keyboard, works fine with no external power. Illumination with external power. Powered hum in back of keyboard works too.<br />
** G15 Gaming keyboard, as long as you press the backlight button twice to turn off the backlight (it says below it dosen't work with backlight on.<br />
** V470 Bluetooth Laser Mouse<br />
<br />
''Keyboards and mice also together with Unifying receiver'' <br />
<br />
* '''Microsoft''' <br />
**Microsoft Comfort Curve Keyboard 2000<br />
**Microsoft Comfort Curve Keyboard 3000 for Business<br />
**Microsoft Digital Media Pro Keyboard Model : 1031 (Debian 13-Apr-2012)<br />
**Microsoft Natural Ergonomic Keyboard 4000 (B) (Debian "Wheezy" beta 18-June-2012)<br />
**Microsoft Wired Keyboard 600 Model 1366 (Debian 28-May-2012 on Production Model B)<br />
**Microsoft Wireless Desktop 700 Keyboard v2.0 (Raspbian Pisces image 08-June-2012 on Production Model B)<br />
**Microsoft Wireless Photo Keyboard (Model 1027) Unifying receiver, no hub<br />
**Microsoft Wireless Natural Multimedia Keyboard (Raspbian Pisces 08-July-2012) (B)<br />
**Microsoft Windows 2000 Keyboard (KB-USBK110610)<br />
**[https://www.microsoft.com/hardware/en-us/p/wired-keyboard-600/ANB-00001 Microsoft Wired Keyboard 600]. The keyboard is rated at 5v/100mA (Wheezy 5-Sept-2012)<br />
<br />
* '''Mikomi''' <br />
** Wireless Deskset KM80545 Keyboard and mouse (Works but range is terrible less than a metre) (B)<br />
<br />
* '''Monoprice'''<br />
** [http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10404&cs_id=1040401&p_id=6854&seq=1&format=2|Monoprice PS/2 To USB Adapter] Directly and through an unpowered hub with a USB mouse plugged in.<br />
<br />
* '''Motorola'''<br />
<br />
** Bluetooth wireless ultra slim keyboard and mouse combo (sold as for the "Atrix" phone) work in combination with the Technika Bluetooth adaptor listed below<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/desktopkits/nov-wcombo.html|Novatech Wireless Combo - Keyboard & Mouse, Nano adapter] (B)<br />
<br />
* '''ONN'''<br />
**ONN Keyboard Stock No: ONA11HO089 (from Walmart). Seems to work fine, even without a hub.<br />
**ONN Keyboard Stock No: ONA11HO087 (from Walmart). Combination keyboard and mouse package with nano receiver. Be sure to configure keyboard layout.<br />
<br />
* '''Perixx''' <br />
**Periboard 716 Wireless Ultra-Slim Keyboard with Touchpad (Debian 07-Jun-2012 on Production Model B)<br />
** PERIBOARD-502 wired keyboard inc built in touchpad (model B/raspian wheezy)<br />
** Periduo-707 Plus (Wireless Keyboard and Mouse) works fine ''most'' of the time. Does suffer from dropouts and glitches though. Usual "drawing too much power from USB" problems show up as well - dropped key presses or constant autorepeats. These can be cured by pulling out and reinserting the dongle in the USB socket. The keyboard sometimes hangs after power on when used with my laptop - it seems to need 30 seconds of non-use before it works fine. Again, remove and insert the dongle cures it. Works fine vi my Benq monitor's USB Hub.<br />
<br />
* '''Philips''' <br />
**Wired Multimedia Keyboard SPK3700BC/97 (Debian 19-Apr-2012 on Production Model B)<br />
<br />
* '''Prodige'''<br />
**Nanox Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01]<br />
<br />
* '''Rapoo'''<br />
**Rapoo E9080 Wireless Ultra-Slim Keyboard with Touchpad<br />
**Rapoo Wireless Multi-media Touchpad Keyboard E2700 [http://www.rapoo.com/showdetails.aspx?P_No=E2700]<br />
**Rapoo Ultra-Slim Wireless Multimedia Keyboard and Mouse E9060 (works proper on powered USB Hub)<br />
<br />
*'''Riitek'''<br />
**RT-MWK03 mini wireless keyboard & trackpad<br />
**RT-MWK02+ mini bluetooth keyboard & trackpad. Followed instructions from this page: [http://www.ctheroux.com/2012/08/a-step-by-step-guide-to-setup-a-bluetooth-keyboard-and-mouse-on-the-raspberry-pi/] and it worked, connection persists across reboots, no problem with either builtin USB or powered USB hub.<br />
**RT-MWK01 mini wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
*'''Rosewill'''<br />
** RK-200 Standard Keyboard<br />
<br />
*'''Saitek'''<br />
** Eclipse II Backlit Keyboard PK02AU (B)<br />
** Eclipse Backlit Keyboard PZ30AV (B)<br />
** Expression Keyboard (US) <br />
** Cyborg V.5 (B)<br />
<br />
*'''SelecLine'''<br />
** WK11P & WM11P-SP-PP. Keyboard and mouse set. (B)<br />
<br />
*'''SIIG'''<br />
** SIIG Wireless Multi-Touchpad Mini Keyboard 02-1286A v1.0 (B)<br />
<br />
*'''Silvercrest'''<br />
** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B) <br />
<br />
*'''SolidTek'''<br />
** Solid Tek KB-P3100BU ASK-3100U. <br />
<br />
*'''Sony'''<br />
** Keyboard for PlayStation 2 (PS2) Linux. Works without powered hub with 5v1A supply, requires manual keyboard remapping with Debian Squeeze to USA 101-key layout.<br />
<br />
* '''SteelSeries'''<br />
** Merc keyboard (B)<br />
<br />
* '''Sun Microsystems'''<br />
** Model: Type 7, SUN PN: 320-1348-02 (Danish key layout)<br />
** Model: Type 6, SUN PN: 320-1279-01 (Danish key layout)<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/keyboards/KB060UK/ KB060UK] Wired Multimedia Keyboard<br />
<br />
* '''Technika'''<br />
** WKEY03 (B)<br />
** TKD-211<br />
<br />
* '''Tesco'''<br />
** Value Keyboard VK109 (B)<br />
** Multimedia K211 Wired Keyboard (B)<br />
<br />
*'''The Pi Hut'''<br />
** Super Slim Apple Style Keyboard (from [http://thepihut.com/products/usb-keyboard-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Apple Style Keyboard Set (Keyboard & Mouse) (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust 17916 Compact Wireless Entertainment Keyboard http://www.trust.com/products/product.aspx?artnr=17916 (B)<br />
** Trust ClassicLine Keyboard http://trust.com/17184 <br />
** Trust Camiva MultiMedia Keyboard http://trust.com/products/product.aspx?artnr=16087<br />
** Trust Convex Keyboard http://trust.com/products/product.aspx?artnr=17603 tested debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
<br />
* '''Unbranded'''<br />
** AK-601 Wireless Mini Keyboard and Trackball (with laser pointer) - sourced from eBay Chinese seller<br />
<br />
* '''Unicomp'''<br />
** USB Endurapro - keyboard and trackpoint work perfectly from powered hub<br />
<br />
* '''Q-Connect'''<br />
** AK-808 (B)<br />
<br />
* '''Xenta'''<br />
** 2.4GHz Wireless Multimedia Entertainment Keyboard with Touchpad (B)<br />
** Mini Multimedia Keyboard (Model no.: 808M) (B)<br />
<br />
===Problem USB Keyboards===<br />
<br />
Note that generally PS/2 keyboards with an USB adapter will not work directly on a PI port, due to the fact that PS/2 keyboards are designed for normal 5V +-5% range, while USB keyboards must be designed to work with 4.4 Volt, and generally USB devices on the PI may receive less than 4.75 Volt. PS/2 + USB adapter keyboards might work behind a powered hub, which does provide the full 5.0V. Some of these keyboards work when running the latest raspbian but not when using the overclocked xbmc version of raspbmc, probably due to the overclocking drawing more voltage away from the rest of the support system devices.<br />
<br />
* '''A4 Tech'''<br />
** Model GL-6 USB Keyboard, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''Accuratus'''<br />
** Accuratus KYBAC100-101USBBLK causes kernel panic (rated 100mA). Tested with 1000mA cheap unbranded and Nokia 1200mA power adaptors.<br />
* '''Apple'''<br />
** [http://www.powerbookmedic.com/xcart1/images/D/apple-keyboard.jpg Apple Keyboard (109 keys) A1048]. Draws too much power and does not seem to work properly when plugged into a powered hub. <br />
*'''Argos'''<br />
** Argos Value Wired Keyboard causes kernel panic<br />
* '''Choidy'''<br />
** Identifiers from usb-devices: Vendor=1a2c ProdID=0002 Rev=01.10 Product=USB Keykoard (yes, 'Keykoard') causes kernel panic<br />
* '''Cit''' <br />
** KB-1807UB Causes kernel panic (Rated <200ma)<br />
* '''Dell'''<br />
** SK-8135 (B) (Rated 1.5A. Takes too much power from pi even when not used as USB hub. Symptom = repeated keystrokes)<br />
** SK-8115 causes kernel panic (rated 100mA) Debian 6-19-04-2012 (B)<br />
** Y-U0003-DEL5 Sticky / Non-responsive keys<br />
* '''Gear Head'''<br />
** KB2300U - Causes kernel panic (B)<br />
* '''GMYLE'''<br />
** Wired USB Slim Chocolate Multimedia Media Typing Keyboard With 3 USB Port hub (B) - Kernel Panic on startup if plugged in. If plugged in at login prompt then freeze. [http://www.amazon.co.uk/gp/product/B0067EC3GW/]<br />
* '''Inland''' <br />
** Inland USB Keyboard Model #70010<br />
* '''Jeway'''<br />
** JK-8170 "The Hunter" - causes kernel oops (Debian6-19-04-2012) (B)<br />
* '''Labtec'''<br />
** ultra-flat wireless desktop USB - Keyboard has 'sticky' keys. Tested both debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
* '''Logik'''<br />
** Wired Multimedia Keyboard Model: LKBWMM11 - causes kernel panic (on Debian 190412 distro) (B)<br />
** Wired Ultra Slim Keyboard Model: LKBWSL11 - causes USB power issues. Not reliable. Causes other USB devices to fail (B) >> '''This is also listed under Working USB Keyboards??'''<br />
* '''Logitech'''<br />
** Logitech Illuminated Keyboard (unstable; not working with led light on; tested both US and NO layouts with both Apple iPad 2 and Asus TF-101 USB chargers)<br />
** G110 Gaming Keyboard - only works with illumination off, otherwise unresponsive. Once failed it needs reconnecting before another attempt. (B)<br />
** G15 Gaming Keyboard - LCD and key backlights flicker, 95% unresponsive to typing. I don't know of a way to turn the illumination off. (B)<br />
** K360 Wireless Keyboard - Occasional sticky keys. (B)<br />
** K400 wireless keyboard with touchpad (completely non-functional on debian6-19-04-2012)<br />
** G510 Gaming Keyboard - lagging or unresponsive keys.<br />
** MX5500 wireless keyboard and mouse with usb bluetooth reciever - Unstable, looses connection without prior notice<br />
** EX100 Cordless Desktop, wireless keyboard and mouse. Mouse and keyboard hangs every few minutes (with or without hub).<br />
* '''Microsoft''' <br />
** Wireless Desktop 800 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Entertainment Keyboard - No key input recognized (possibly connectivity issue as pairing devices does not seem to work)<br />
** Wireless Optical Desktop 1000 - Keyboard has 'sticky' keys (B)<br />
** Wireless Keyboard 2000 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Desktop 3000 - Keyboard has 'sticky' keys.<br />
** Arc wireless - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X4 - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X6 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Comfort Keyboard 5000 - Keyboard has 'sticky' keys. (B)<br />
** Razer Reclusa - Keyboard has 'sticky' keys. (B rev 2.0)<br />
* '''Novatech'''<br />
** NOV-KEY2 - Causes kernel panic (B)<ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
* '''PC World Essentials'''<br />
** PKBW11 Wired Keyboard - no power to keyboard, no error messages on both Arch 29-04-2012 and Debian6-19-04-2012, same Pi works with Asda keyboard. Me too, but caused a kernel panic -- tested on powered hub and direct.<br />
* '''Razer'''<br />
** Razer Tarantula gaming keyboard - sticky keys, could be power issue as is programmable with host powered USB hub and audio jacks.<br />
** Razer BlackWidow - Sticky keys, could be a power related issue due to illuminated logo (Blue LED).<br />
* '''SIIG'''<br />
** Wireless Ultra Slim Multimedia Mini Keyboard JK-WR0612-S1 - Unresponsive and sticky keys.<br />
* '''Texet'''<br />
** MB-768B standard keyboard (Rated 5V 1.5A(!), so probably too much power drain. Kernel panic, Debian6-19-04-2012)<br />
* '''Trust''' <br />
** TRUST GXT 18 Gaming Keyboard - No power to keyboard, could be a driver issue - no error messages.<br />
* '''Unbranded'''<br />
** Compuparts<br />
** model no. HK-6106 (B) <ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
** LK-890 (Multimedia keyboard & Optical Mouse) - kernel panic on Debian Squeeze, ArchLinux and Qtonpi.<br />
* '''Verbatim'''<br />
** [http://www.amazon.com/gp/product/B004LB5AKY/ref=oh_details_o00_s00_i02|Verbatim 97472 Mini Wireless Slim Keyboard and Mouse] - Keyboard has lagging, unresponsive and sticky keys issues. (Tested with and without powered USB hub.)<br />
* '''Wilkinsons / TEXET'''<br />
** Model MB-768B causes kernel panic on debian6-19-04-2012.<br />
* '''Xenta'''<br />
** HK-6106 - causes kernel panic (on Debian 190412 distro)(B)<br />
** Multimedia Wireless Keyboard and Mouse Set (Keyboard Model: HK3518B + Mouse Model HM3301) (B) - occasional sticky keys, and occasional complete lock-up<br />
<br />
== USB Mouse devices ==<br />
USB mouse devices that present themselves as a standard HID (Human Interface Device) device should work, however some hardware requires special drivers or additional software, usually only compatible with Windows operating systems. <br />
<br />
===Working USB Mouse Devices===<br />
The following is a list of specific mouse devices known to work and which appear to be fault-free.<br />
<br />
* '''A4Tech'''<br />
** OP-530NU Padless Wired Mouse<br />
<br />
* '''Asda'''<br />
** HM5058 (Smart Price) Wired Mouse<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''ASUS'''<br />
** MS-511U (comes with Asus Vento KM-63 keyboard/mouse combo) (B)<br />
** MG-0919 (wireless)<br />
<br />
* '''Belkin'''<br />
**F8E882-OPT (B)<br />
<br />
* '''Dell'''<br />
** M-UVDEL1 (B)<br />
** M056U0A (B)<br />
** DZL-MS111-L (B) (100mA)<br />
** MS-111P (100mA)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Dynex'''<br />
** DX-WMSE (100mA) (B)<br />
<br />
* '''Fellowes'''<br />
** 99928 USB Micro Track Ball (works without a hub, directly plugged in) (B)<br />
<br />
* '''Filand'''<br />
** OP-102i Mini Optical Mouse<br />
<br />
* '''Genius'''<br />
** GM-04003A (B)<br />
** Slimstar 8000 wireless mouse (Can be intermitent. Mouse pointer sometimes is irratic.)<br />
** Traveler 515 Laser<br />
<br />
* '''HP'''<br />
** MN-UAE96 (The basic stock HP wired mouse)(B)<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''Kensington'''<br />
** Kensington Expert Mouse Trackball K64325<br />
** Kensington Expert Mouse "Slimblade" K72327US<br />
<br />
* '''Labtec'''<br />
** Corded Laser Glow Mouse 1600, rated 5V 100mA (P/N 810-000819, M/N M-UAZ149, PID GT83401)<br />
<br />
* '''Lenovo'''<br />
** Wired Optical Mouse Model: MO28UOL<br />
<br />
* '''Logik'''<br />
** Wired Optical Glow Mouse Model: LGGMO10. (B)<br />
<br />
* '''Logitech'''<br />
** B105 Mouse for Laptops (OEM)<br />
** Cordless Pilot Optical Mouse M/N M-RR95 with Cordless Mouse Receiver M/N C-BA4-MSE<br />
** G5 Logitech Gaming Mouse (B)<br />
** G5v2 Logitech Gaming Mouse (B)<br />
** G500 Logitech Gaming Mouse (B)<br />
** G700 Logitech Wireless Gaming Mouse (B)<br />
** LX-700 Cordless Desktop Receiver (B)<br />
** LX 710 Wireless Mouse - works fine with receiver plugged directly into RPi (accompanying keyboard works fine too).<br />
** M90 optical mouse<br />
** M185 Wireless Mouse (B)<br />
** M210 (part of the MK260 set) (B)<br />
** M305 Wireless Mouse<br />
** M310 Cordless Mouse<br />
** M325 Wireless Mouse<br />
** M505 USB wireless laser, model no: 910-001324 (B)<br />
** M510 Wireless Mouse (B)<br />
** M705 Marathon Mouse (Unifying receiver, no powered hub) (B)<br />
** M-BD58 Wheel Mouse (B)<br />
** M-BJ58/M-BJ69 Optical Wheel Mouse (B)<br />
** M-BJ79 (B)<br />
** M-BT96a Optical Mouse<br />
** MX320/MX400 laser mouse (B)<br />
** MX518 Optical wheel mouse (B)<br />
** Optical USB Mouse (M/N 931643-0403)<br />
** Performance Mouse MX (B)<br />
** MX Revolution (B) (Debian "Wheezy" beta 18-June-2012)<br />
** VX Nano Cordless Laser Mouse for Notebooks<br />
** Wheel Mouse (M/N BJ58)<br />
<br />
* '''Medion'''<br />
** Mini mouse Model M101-CBJ P/N 40016632 S/N 7BFSA00003445 rated 5v 100ms Works fb on model B with raspian wheezy<br />
<br />
* '''Microsoft''' <br />
** Comfort Curve Mouse 3000 for Business<br />
** Comfort Mouse 6000 (works when directly connected to Pi (B). Does not work when connected through USB Hub (mouse pointer intermittent).<br />
** Compact optical mouse 500 V2.0 (B)<br />
** Wheel Optical Mouse (wheel and additional buttons not tested) (B)<br />
** Microsoft Intellimouse Optical Mouse<br />
** Microsoft Wireless Laser Mouse 8000<br />
** Microsoft Wireless Mobile Mouse 1000<br />
** Microsoft Wireless Mobile Mouse 3500<br />
** Microsoft Wireless Mobile Mouse 4000<br />
** Microsoft Wireless Mouse 700 v2.0<br />
** Microsoft Comfort Mouse 4500<br />
** Wireless IntelliMouse Explorer 2.0 (unifying receiver, no hub)<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-mouser.html|Novatech M1 USB Mouse - Wired](B)<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-dl10.html|Novatech DL10 Wireless Mouse] (B)<br />
<br />
* '''Razer'''<br />
** Boomslang Collectors Edition 2007 (B)<br />
<br />
* '''Rosewill'''<br />
** Rosewill RM-C2U<br />
<br />
* '''Saitek'''<br />
** Notebook Optical Mouse (PM46)<br />
<br />
* '''Samsung'''<br />
** Samsung model:AA-SM3PCPB usb Optical Mouse (draws 50mA) <br />
<br />
* '''Sun microsystems'''<br />
** Model: FID-638 , SunPN: 371-0788-01<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/optical-mice/MI015/ MI015]<br />
<br />
* '''Swiftpoint'''<br />
** [http://http://www.americas.futuremouse.com/] Swiftpoint Mini Wireless Optical Mouse. Does not require any special drivers. Haven't confirmed if charging the mouse requires a powered USB hub or not.<br />
<br />
* '''Targus'''<br />
** AMU2701EUK (B)<br />
<br />
* '''Technika'''<br />
** TKOPTM2 (B)<br />
**TKD-211<br />
<br />
* '''Tesco'''<br />
** Wired optical mouse M211 (B)<br />
<br />
*'''The Pi Hut'''<br />
** USB Mouse for Raspberry Pi (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Keyboard & Mouse Set (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust Nanou Wireless Micro Mouse http://trust.com/products/product.aspx?artnr=17087<br />
<br />
* '''Verbatiam'''<br />
**Mini Nano Optical Mouse 97470 (wireless on non-powered 3 usb dongle hub) (B)<br />
<br />
* '''Xenta'''<br />
** MOW0810 (B)<br />
** Wired Optical Mouse (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Generic'''<br />
** Generic 2.4GHz Wireless Mouse (ID 040b:2013 Weltrend Semiconductor) (B)<br />
<br />
===Problem USB Mouse Devices===<br />
The following is a list of specific mouse devices that have problems working with the Raspberry Pi<br />
* '''A4Tech'''<br />
** Model G7-630 Wireless Mouse, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''HP'''<br />
** HP Retractable Mobile Mouse (Optical) HP Product Number XP472AA - errors / boot loop RASPBMC (B)removed mouse, started with no further errors. <br />
<br />
* '''Logik'''<br />
** Logik IMF Blue Trace Wired USB mouse (Model LMWBLU11) - disconnects from the USB port every 20 seconds when using the Raspian distro. Always reconnects to the USB port successfully (B)<br />
<br />
* '''Logitech'''<br />
** Logitech G400 Gaming Mouse - 100% CPU load and laggy mouse cursor when the mouse is moved. MX518 works fine on the same setup, so I suspect it's a polling rate issue. [http://tech2.in.com/reviews/mice/logitech-g400-is-it-a-worthy-successor/231012 this] says the mouse is 1000Hz out of the box, whereas the 518 is only 125Hz. Solution found: add usbhid.mousepoll=8 to the kernel commandline.<br />
<br />
* '''Microsoft'''<br />
** Microsoft Touch Mouse - Does not see right clicks, Only left.<br />
<br />
* '''Razer'''<br />
** Naga Wired USB mouse - the mouse seems to present itself as a keyboard because the numpad on the left-hand side of the device works but the cursor doesn't move.<br />
<br />
* '''Roccat'''<br />
** Kone[+] Wired USB mouse - Nothing happens when moving the mouse, haven't looked further into the issue (B)<br />
<br />
* '''Trust'''<br />
** Optical USB Mouse MI-2250 - Nothing happens when moving the mouse (B)<br />
<br />
* '''Xenta'''<br />
** Multimedia Wireless Keyboard and Mouse Set (Mouse Model: HM-3301) (B) - frequent lost connection giving stuttering mouse cursor indicating USB current not enough for dongle<br />
<br />
== USB Real Time Clocks ==<br />
*Cymbet<br />
** Cymbet CBC-EVAL-06 USB Real Time Clock (FT2232 to SPI to RV-2123)<br />
Device information at http://www.cymbet.com/pdfs/DS-72-22.pdf<br />
Code to access the RTC from Linux: https://github.com/owendelong/Cymbet-RTC<br />
Does not require a powered hub.<br />
<br />
== USB WiFi Adapters ==<br />
<br />
See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing<br />
<br />
There is a howto on installing the TL-WN722N adapter [http://elinux.org/RPi_Peripherals#Wireless:_TP-Link_TL-WN722N_USB_wireless_adapter_.28Debian_6.29 here], which also acts as a guide for installing others too.<br />
<br />
===Working USB Wifi Adapters===<br />
<br />
These adapters are known to work on the Raspberry Pi. This list is not exhaustive, other adapters may well work, but have not yet been tried.<br />
<br />
'''Note:''' A WiFi adapter will probably need more power than the Raspberry Pi USB port can provide, especially if<br />
there is a large distance from the WiFi adapter to the WiFi Access Point. Therefore, you may need to plug the WiFi adapter into a powered USB hub.<br />
<br />
* '''3COM'''<br />
** 3CRUSB10075: ZyDAS zd1211rw chipset (!)<br />
<br />
* '''7DayShop'''<br />
** W-3S01BLK, W-3S01BLKTWIN : Unbranded product available from 7DayShop, in a single or twin pack. [http://www.7dayshop.com/catalog/product_info.php?cPath=777_9&products_id=112046], [http://www.7dayshop.com/catalog/product_info.php?&products_id=112527]. Tested on Debian Wheezy, with the dongle attached directly to the RPi along with the wireless keyboard receiver. Shows up as a Ralink RT5370 device, and no drivers or additional software downloads required. Created wpa.conf, edited 'interfaces' file and restarted the networking. The manufacturer portion of the MAC address (7cdd90) is assigned to "Shenzhen Ogemray Technology Co., Ltd."<br />
** It works without additional software connected directly to a Rev 2 Pi but stops working after a period of time (3 to 4 hours) with a fully updated Wheezy and all the 'USB workarounds' [http://elinux.org/Rpi_USB_check-list] in place. <br />
<br />
* '''Alfa'''<br />
** AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware package)<br />
** AWUS036NH: Tested on Arch Linux ARM using the rt2800usb module.<br />
** AWUS036NH: Tested on Debian Wheezy (with Ralink firmware package). Tested on Raspbian too (drivers from aircrack-ng).<br />
** AWUS036H (500mW version): Tested on Raspbian (drivers from aircrack-ng).<br />
** AWUS036H (1W version): Tested on Raspbian (drivers from aircrack-ng). Needs USB powered HUB or Rev2 of the board / polyfuse bypass.<br />
** AWUS036NHA: Tested on Raspbian (drivers from aircrack-ng). Works fine if connected after boot, otherwise Raspberry Pi won't boot up.<br />
<br />
* '''AirLink101'''<br />
** AWLL5088: Tested on Debian Wheezy. This adapter is based on the OEM Edimax EW-7811Un. For automatic installation, See MrEngmanns script listed below under the Edimax device.<br />
<br />
* '''Asus'''<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N10] USB ID 0b05:1786, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B) (not needed with latest Raspbian “wheezy” 2012-07-15: this Asus works N10 out of the box) Does not support nl80211 APIS, so hostapd won't work.<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N13] USB ID 0b05:17ab, works with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1 image] as it includes kernel [http://www.element14.com/community/message/57635#57660 with 8192u driver built-in] (B)<br />
** WL-167G v1 USB ID 0b05:1706, Ralink RT2571 working out-of-the-box on Debian image from 2012-04-19. Requires powered hub, otherwise it is detected by OS but will not function.<br />
<br />
* '''Belkin'''<br />
** Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]. On Debian requires the firmware-ralink package from the non-free repository. The usbcore module needs to be added to /etc/modules [http://www.penguintutor.com/blog/viewblog.php?blog=6281 install instructions].<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Tested on OpenELEC (works OOB), RaspBMC (works OOB), Raspian - 2012-07-15-wheezy-raspbian (followed [http://forum.xbian.org/viewtopic.php?f=7&t=29 instructions here]) '''Powered hub required!'''<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Works on RaspBMC OOB (with NetworkManager plugin). Works WITHOUT powered hub on 5v 800mA power with 6 overvolt (nothing else connected to USB)<br />
** Belkin Components F7D1101 v1 Basic Wireless Adapter [Realtek RTL8188SU] USB ID 050d:945a, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B)<br />
**Belkin Components F6D4050 V1 [Realtek RT3070] USB ID: 050d:935a Driver: RT3572STA(recommended),RT2800USB,RT2870STA. Tested under Arch using [https://wiki.archlinux.org/index.php/Setting_Up_Belkin_F6D4050_Wireless_USB_Dongles this] guide.<br />
**Belkin Components F6D4050 V1/V2 [Realtek RT3070] USB ID: 050d:935a / 935b Driver: RT3572STA. Tested with Raspbian - See [http://iggy82.blogspot.co.uk/2012/08/wireless-n-raspberry-pi-belkin-f6d4050.html installation instructions] - Powered hub not required!<br />
** Belkin Components F7D2102 "N300" Micro Wireless USB adapter. Tested with Occidentalis 0.1. Tested and working on Rasbian wheezy (and RaspBMC), driver RTL8192CU, no powered hub needed (dongle directly attached to the onboard ports)<br />
** Belkin Components F9L1001v1 "N150" Wireless USB Adapter. Tested and working on Rasbian wheezy WITHOUT powered hub. <br />
** Belkin Surf Micro WLAN USB-Adapter (Raspbian Wheezy, unpowered hub, "N150")<br />
<br />
* '''BlueProton'''<br />
** [http://www.element14.com/community/docs/DOC-44703 BT3] USB ID: 0bda:8187; tested on Debian, Fedora & Arch; rtl8187 driver (B)<br />
<br />
* '''Buffalo'''<br />
** USB ID: 0411:01A2 WLI-UC-GNM - Tested on Raspbmc; rt2800usb driver <br />
<br />
* '''Conceptronic'''<br />
** C300RU. Works out of the box in Raspbian. Causes reboot when plugging on a live Rev. 2 RPi<br />
<br />
* '''Conrad'''<br />
** WLAN Stick N150 mini. Works out of the box in OpenELEC, [http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/ requires firmware-realtek and r8712u kernel module on Debian].<br />
** WLAN Stick N150 Nano [Realtek RTL8188CUS]. Requires a powered USB hub. See Micronet SP907NS for installation instructions and script.<br />
<br />
* '''DIGICOM'''<br />
** USBWAVE54 [chipset Zydas ZD1211] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave54]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with zd1211-firmware . <br />
** USBWAVE300C [chipset Ralink 2870] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave300c]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with firmware-ralink . <br />
<br />
* '''D-Link'''<br />
** AirPlus G DWL-G122 (rev. E). USB ID 07d1:3c0f, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository. (However I experience total crashes on raspbian 2012-07-15 after a few minutes of load on the wlan. Will have to investigate via serial console.)<br />
** AirPlus G DWL-G122 (rev. C). USB ID 07d1:3c03, Ralink RT2571. Working out-of-the-box on Arch image from 2012-04-29.<br />
** AirPlus G DWL-G122 (rev. B1). USB ID 2001:3c00, Ralink RT2571. Working out-of-the-box on Arch image from 2012-06-13.<br />
** DWA-110 (Version A1). Requires the ralink package from the non-free repository on Debian.<br />
** DWA-121 (Version A1). Wireless N 150 Pico. Works out-of-the-box with Raspian Wheezy (2012-09-18)<br />
** DWA-123 (Version A1). USB ID 2001:3c17, Ralink RT2800. Working out-of-the-box on Arch image from 2012-04-29. (working without UBS Hub - not yet sure if it achieves full speed though.)<br />
** DWA-131 USB ID 07d1:3303,Realtek RTL8192SU, 802.11n Wireless N Nano. Works out of the box on Raspbian “wheezy”. Verified with direct USB : no powered USB hub needed. Also verified when Nano used in powered USB hub. Someone had trouble configuring SSID/Passphrase in etc/network/interfaces file. But no problem & very easy to configure using wicd : wicd is a gui interface on LXDE for network configuration. Install it using command-line : <code>apt-get install wicd</code>. Once configured ith wicd to auto-run on boot, no need to turn back to LXDE. Recommended.<br />
** DWA-140 (Version B1). USB ID 07d1:3c09, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-140 (Version B2). USB ID 07d1:3c0a, Ralink RT3072. Workaround for faulty firmware binary: Place file rt2870.bin from [https://launchpad.net/ubuntu/oneiric/+source/linux-firmware/1.53/+files/linux-firmware_1.53.tar.gz linux-firmware_1.53.tar.gz] in /lib/firmware. [https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/770232 Explanation].<br />
** DWA-160 (Version B1). USB ID 07d1:3c11, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-160 (Version A2). USB ID 07d1:3a09, Atheros AR9170. (NOTE: I can only get it to work through powered USB hub) requires carl9170-fw firmware [http://http://aur.archlinux.org/packages.php/packages.php?ID=44102]<br />
<br />
* '''Edimax'''<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] USB ID 7392:7811, RTL8192CU, driver blob [http://www.electrictea.co.uk/rpi/8192cu.tar.gz download] via [http://www.element14.com/community/docs/DOC-44703 Element14], works with WPA2-AES-CCMP ([http://www.ctrl-alt-del.cc/2012/05/raspberry-pi-meets-edimax-ew-7811un-wireless-ada.html howto]) (B) - [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Alternative driver download link that works with Raspian]<br />
** The EW-7811Un can be powered directly from the Raspberry Pi if the Raspberry Pi is powered using a well regulated power supply.<br />
** A script-based installation for the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] by MrEngman can be found [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=26&t=6256&hilit=edimax on the RasPi forums]. Tested with Debian Squeeze and Raspbian. [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt An installation guide can be found here.]<br />
** Instructions for getting the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] working in Raspbmc (tested RC3) can be found [http://forum.stmlabs.com/showthread.php?tid=780 here].<br />
** Simple step-by-step instructions for [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] which uses the RTL8192 chipset [[RPi_edimax_EW-7811Un]](B)<br />
** [http://www.edimax.com/en/produce_detail.php?pd_id=8&pl1_id=1&pl2_id=44 EW-7318USg] USB ID 148f:2573, rt73usb. RT2573 chipset. Works with powered usb-hub or shorted polyfuses.<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=261&pl1_id=1&pl2_id=44 EW-7711UAn], Ralink RT2870, works perfectly on Arch with a powered hub (not tested without yet). Simply required wireless_tools and wpa_supplicant, the drivers/firmware are included in kernel 3.0. I followed the Arch [https://wiki.archlinux.org/index.php/Wireless_Setup Wireless Setup] instructions.<br />
<br />
* '''edup'''<br />
** [[http://www2.buyincoins.com/details/usb-150m-wifi-wireless-lan-network-card-adapter-antenna-product-1916.html Edup 150MBPS wifi adapter]] USB ID: 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to install the firmware as rt2870.bin in /lib/firmware.([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) (B)<br />
** [http://www.szedup.com/show.aspx?id=1681 edup nano EP-N8508] Use method shown [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=7471&p=91736 here] for debian. Requires powered USB hub for adequate power. When directly powered by Pi, it fails after a few minutes. (B) Unusable with analog audio because when data is being send or recieved the audio get disorted.<br />
<br />
* '''Eminent'''<br />
** EM4575 - rt2800usb driver.<br />
<br />
* '''EnGenius'''<br />
** EUB9603 EXT - Realtek r8712u driver <br />
<br />
* '''Gigabyte'''<br />
** Gigabyte GN-WB32L 802.11n USB WLAN Card. Works with the rt2800usb driver.<br />
<br />
* '''GMYLE'''<br />
** Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.<br />
<br />
* '''IOGear'''<br />
** [http://www.element14.com/community/docs/DOC-44703 GWU625] USB ID 0bda:8172, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian Squeeze and install firmware-realtek from non-free squeeze repo. No need to download firmware when using Debian Wheezy (B)<br />
<br />
* '''Linksys'''<br />
** Linksys (Cisco) WUSB100 ver.2 1737:0078, tested on raspbian; follow [http://www.brucalipto.org/linux/the-raspberry-diary-wusb100-wireless-n/ Brucalipto.org] instructions; not stress tested but works without issues for light network load.<br />
** Linksys (Cisco) WUSB600N, test on raspbian, details [http://elibtronic.ca/content/20120731/raspberry-pi-part-1-wifi-support here]<br />
** Linksys WUSB54GC (manufactured 07/2008) No issues!<br />
<br />
* '''LogiLink'''<br />
** Wireless LAN USB 2.0 Nano Adapter 802.11n LogiLink [http://www.logilink.eu/showproduct/WL0084B.htm] is working even usb powered.<br />
<br />
* '''Micronet'''<br />
** Micronet SP907NS, 11N Wireless LAN USB Adapter (uses Realtek RTL8188CUS) works plugged directly into R-Pi USB (B) [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt Debian installation instructions] IMPORTANT: read the instructions first to avoid problems, and [http://dl.dropbox.com/u/80256631/install-rtl8188cus-latest.sh Auto-install script]. The script has been used to install other adapters using the RTL8188CUS chip. [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Updated driver] that handles the latest rpi-updates that kill the original driver, download for manual installation, automatically installed by the Auto-install script.<br />
<br />
* '''MSI'''<br />
** 0db0:6861 MSI-6861 802.11g WiFi adapter (US54G): works with external powered USB hub, requires firmware from [http://sourceforge.net/projects/zd1211/files/zd1211-firmware/ here], power management must be disabled: <code>iwconfig wlan0 power off</code><br />
<br />
* '''Mvix'''<br />
** Mvix Nubbin (MS-811N): works out of the box on Raspbian "wheezy" and does not need a powered USB hub.<br />
<br />
* '''Netgear''' <br />
** N150: Reported as WNA1100 device, uses the Atheros ar9271 chipset. On Debian, requires the <code>firmware-atheros</code> package from the <code>squeeze-backports</code> non-free repository (!)<br />
** N150: Some versions reported as Realtek RTL8188CUS device. Read Micronet entry above and use RTL8188CUS script for installation. Works best plugged into powered USB hub.<br />
** WG111v1: Prism54 chipset. Needs powered hub. Follow info for Prism54 chipset on Debian wiki.<br />
** WG111v2: Realtek rtl8187 chipset (!)<br />
<br />
* '''OvisLink'''<br />
** Evo-W300USB: USB ID 148f:2270 Ralink Technology RT2770. apt-get install firmware-ralink<br />
<br />
* '''Patriot Memory'''<br />
** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered usb hub.<br />
** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module<br />
<br />
* '''Ralink'''<br />
** inner 02 joggler wifi usb RT2770F USB-ID 148f:2770 (firmware-ralink required) (only got dhcp on powered hub)<br />
** [http://www.dx.com/p/24688 RT2070] USB-ID 148f:2070 firmware is already loaded into Raspbian. For Debian, the firmware must be installed ([http://wiki.debian.org/rt2870sta instructions]). Needs a powered USB hub.<br />
** [http://www.element14.com/community/docs/DOC-44703 RT2501/RT2573] USB-ID 148f:2573 (firmware-ralink required) (B)<br />
** RT5370 USB-ID 148f:5370 ([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) [[RPi_Ralink_WLAN_devices]](B). An image of an adapter with this chip can be found [http://i.imgur.com/wRF7L.jpg here].<br />
<br />
* '''Rosewill'''<br />
** RNX-N180UBE Wireless B/G/N Adapter<br />
*** Realtek RTL8191SU chipset, USB-ID 0bda:8172<br />
*** Tested in Arch, works out of box. Powered USB hub required.<br />
*** Tested in Raspbian, used wicd to configure network settings. Powered USB hub Required.<br />
*** Tested in Raspbmc. Needs package firmware-realtek and used wicd-curses to configure. Powered USB hub required<br />
** RNX-G1 Wireless B/G Adapter<br />
*** Realtek RTL8187 chipset, USB-ID 0bda:8187<br />
*** Tested in Arch, works out of box. USB hub required.<br />
** RNX-MiniN1 (RWLD-110001) Wireless-N 2.0 Dongle (Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter)<br />
*** Tested in Raspbian, powered from USB hub.<br />
<br />
* '''Sagem'''<br />
** Sagem Wireless USB stick XG-760N : USB ID 079b:0062, Module is not shipped in Debian image, but can be "sudo apt-get install zd1211-firmware"<br />
<br />
* '''Sempre'''<br />
** Sempre Wireless USB stick WU300-2: USB ID 0bda:8172, Realtek r8712u driver + firmware-realtek package. Module is shipped in Raspbian image. If you need to build it for other distros, read this: http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/<br />
<br />
* '''SL'''<br />
** SL-1507N: USB 802.11n 150M WiFi Wireless Lan Network Card Adapter SL-1507N Black<br />
*** I bought this on on eBay for $4.19 (free shipping) @ http://www.ebay.com/itm/270853614804?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_4379wt_1199<br />
*** It worked out of the box on Raspbmc RC4, with the network manager add-on; seems to be an rt2800usb<br />
*** dmesg output "usbcore: registered new interface driver rt2800usb"<br />
<br />
* '''SMC'''<br />
** SMCWUSBS-N : Hardware detected as rt2800 but missing firmware; "sudo apt-get install firmware-ralink" fixed it<br />
** SMCWUSB-G : Gives "couldn't load firmware" error. "sudo apt-get install zd1211-firmware" fixes it.<br />
<br />
* '''Sony'''<br />
** Sony UWA-BR100 802.11abgn Wireless Adapter [Atheros AR7010+AR9280] (Vendor ID: 0411, Product ID: 017f) - Tested with Raspbian. Needs package firmware-atheros.(B)<br />
<br />
* '''Tenda''' <br />
** USB 11n adapter on a G network: Ralink 2870/3070 driver (!)<br />
** Tenda W311U Mini 11N Wireless USB Adapter (USB-ID 148f:3070): Ralink 2870/3070 driver; needs powered hub. [http://blog.modmypi.com/2012/06/installing-tenda-w311u-mini-wireless.html Debian installation instructions]<br />
** Tenda W311U+ Wireless USB Adapter - Tested with Raspian.<br />
<br />
*'''The Pi Hut'''<br />
** USB 802.11n WIFI adapter (from [http://thepihut.com/products/usb-wifi-adapter-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''TP-Link'''<br />
** TL-WN422G v2 (ath9k_htc) Works OOTB in Debian Wheezy Beta. Runs without powered Hub when plugged into running RasPi, but the RasPi won't boot while the stick is plugged in.<br />
** TL-WN721N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B) | works OOTB with wheezy raspbian (2012-08-16) connected directly to raspberry pi (B) and AP functionality tested with hostapd.<br />
** TL-WN722N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B)<br />
** TL-WN821N v3 (ath9k_htc, htc_7010.fw); works out of the box on ArchLinuxARM and on OpenElec (>r11211), Problems with prior OpenElec; needs powered USB Hub (B) <br />
<br />
* '''Trendnet'''<br />
** [http://www.wikidevi.com/wiki/TRENDnet_TEW-648UBM TEW-648UBM] USB ID: 20f4:648b, works OOTB with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/ Adafruit Occidentials Raspbian Wheezy variant] as it includes kernel with [http://www.wikidevi.com/wiki/Special:Ask?title=Special%3AAsk&q=%5B%5BChip1+model%3A%3ARTL8188CUS%5D%5D&po=%3FInterface%0D%0A%3FFCC+ID%0D%0A%3FVendor+ID%0D%0A%3FDevice+ID%0D%0A%3FChip1+model%0D%0A%3FSupported+802dot11+protocols%0D%0A%3FMIMO+status%0D%0A%3FOUI%0D%0A&sort_num=&order_num=ASC&eq=yes&p%5Bformat%5D=broadtable&p%5Blimit%5D=500&p%5Bsort%5D=&p%5Boffset%5D=&p%5Bheaders%5D=show&p%5Bmainlabel%5D=&p%5Blink%5D=all&p%5Bsearchlabel%5D=&p%5Bintro%5D=&p%5Boutro%5D=&p%5Bdefault%5D=&p%5Bclass%5D=sortable+wikitable+smwtable&eq=yes RTL8188CUS driver built-in] (B)<br />
<br />
* '''Widemac'''<br />
** RT5370 Wireless Adapter from [http://www.ebay.co.uk/itm/180887771838?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Ebay] runs without powered hub. Follow these [http://elinux.org/RPi_Ralink_WLAN_devices instructions] but go to [http://ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/ ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/] and pick the latest firmware-ralink_0.xx_all.deb<br />
<br />
* '''ZyXEL'''<br />
** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)<br />
<br />
===Problem USB Wifi Adapters===<br />
<br />
These adapters were tested and found to have issues the Raspberry Pi. Note [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=6928] as a possible solution/explanation for errors while running LXDE.<br />
<br />
* '''Alfa'''<br />
** AWUS036NHA (Vendor ID: 0cf3, Product ID: 9271) - Tested with Raspbian. Works fine if connected after boot. Kills boot process if previously attached. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=16809&p=169469#p169469 Details here.]<br />
<br />
* '''EDIMAX'''<br />
** EW-7811Un (Vendor ID: 7397, Product ID: 7811) - Reports as containing the Realtek RTL8188CUS chipset listed below, no lockup or kernal oops under wheezy but dmesg reports constant timeouts trying to initialize the module.<br />
<br />
* '''Linksys'''<br />
** WUSB300N (Vendor ID: 13B1, Product ID: 0029) - Tested with Raspbian, OpenELEC, among others. No Linux chipset support for Marvell 88W8362 at all.<br />
<br />
* '''LogiLink'''<br />
** WL0085 tested under debian (squeeze, wheezy, raspbian); no stable connection can be established. This gets even worse when X is running.<br />
<br />
* '''MicroNEXT'''<br />
** MN-WD152B (Debian image) modprobe hangs when plugged in, lsusb hangs. udevd errors in the logs. [http://www.element14.com/community/thread/17632] [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=6737]<br />
*** Possible fix: try the new [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1] image (based on Raspbian Wheezy) as it includes the needed 8192cu driver builtin to the kernel<br />
<br />
* '''Netgear'''<br />
** WNDA3100v2 tested with debian (wheezy); no driver for broadcom chipset (see [http://www.wikidevi.com/wiki/Netgear_WNDA3100v2 http://www.wikidevi.com/wiki/Netgear_WNDA3100v2]).<br />
<br />
* '''Realtek'''<br />
** RTL8188CUS USB-ID 0bda:8176, kernel oops in dmesg and freeze when pulled from USB. (B)<br />
<br />
* '''Trendnet'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TEW-424UB] USB ID: 0bda:8189; tested on Debian, Fedora & Arch; rtl8187 driver; errors with LXDE running (B)<br />
<br />
* '''TP-Link'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TL-WN821N] USB ID: 0cf3:7015; tested on Debian; requires [http://linuxwireless.org/download/htc_fw/1.3/htc_7010.fw htc_7010.fw] firmware; ath9k_htc driver; errors with LXDE running (B)<br />
** TL-WN723N USB ID: 0bda:8176; tested on Arch without a powered hub; it seems to draw too much current.<br />
<br />
== USB Bluetooth adapters ==<br />
===Working Bluetooth adapters===<br />
* Asus USBIA-EG (paired with Asus Blutooth Keyboard/Media Center Remote<br />
** Verified works error-free in XBMC. Text echo problems exist in Raspbian<br />
* Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) - (USB ID 0a12:0001)<br />
** Example of above is; TOPDIGI UA01 Bluetooth USB Dongle Plug and Play (install bluez package from std repos)<br />
** Tesco own brand 'Technika' Nano Bluetooth Adaptor has the Cambridge Silicon Radio chipset and works fine, cost £5.97 at time of posting.<br />
** Hama USB Bluetooth 3.0 adapter (Class 1) ~£10 on amazon.co.uk.<br />
** Another sample: Product ID: 0a12:0001, pictured here: http://www.element14.com/community/message/58288<br />
** RiiTek RT-MWK02+ - comes with a usb bluetooth adapter that works perfectly for both the RiiTek mini bluetooth keyboard/mouse and other bluetooth devices. Tested both on builtin USB and on powered USB hub. There are other RiiTek bluetooth (and non-bluetooth wireless) devices on the working list. Bluetooth adapter shows up in lsusb as "0a12:0001 Cambridge Silicon Radio" - this is notable as most other sources of this chipset do not seem to be available in the US.<br />
* D-Link DBT-122, with ID 07d1:f101, using a Broadcom chip<br />
** http://www.element14.com/community/message/58288<br />
* IOGear GBU321 (Broadcom BCM2045 Chipset)<br />
** Works with Raspbian Wheezy directly attached to Pi and via powered USB hub.<br />
* Trust BT-2400p<br />
** Working well with Raspbian Wheezy directly attached to Pi. Using with sma-bluetooth (SMA Solar Inverter reading software).<br />
<br />
===Problem Bluetooth adapters===<br />
* '''Belkin'''<br />
** Belkin F8T017. Tested with Raspbian 2012-07-15 and bluez installed with apt-get. When dongle is inserted into Pluscom powered USB hub, my remote PuTTY session scrolls incredibly slowly (testing with ls -R to generate text). Suspect network issue. Lots of errors on dmesg too. Pi itself is responsive when using directly. On removal of the device everything goes back to normal.<br />
* '''Generic'''<br />
** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.<br />
* Asus USB-BT211<br />
** Shows up as HCI device in Raspbian, but does not scan or pair.<br />
** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962<br />
<br />
== USB Ethernet adapters ==<br />
===Working Ethernet adapters===<br />
* '''Wintech'''<br />
** USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver. Probably needs more than 100 mA current. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=46&t=8708#p106136]<br />
* '''LogiLink'''<br />
** USB 2.0 UA0144: AX88772 chipset using the asix kernel driver. Tested only on powered USB hub so far.<br />
** LogiLink Fast EN USB 2.0 to RJ45 Adapter: Test on wheezy-Raspian (2012-08-16) without USB Hub will be confirmed<br />
lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter <br />
* '''Apple'''<br />
** Apple USB Ethernet Adapter using asix kernel driver. Works out of the box on Raspbian, haven't tested on any other OS.<br />
* '''Edimax'''<br />
** Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Works out of the box. Needs its own power source.<br />
* '''A-Link'''<br />
** A-Link NA1GU Gigabit USB 2.0 ethernet adapter<br />
This adapter works, but (probably) requires a bit of work. The driver for the chipset (Asix AX88178) included with the Raspbian kernel (v 3.1.9+ Aug 7 2012) does '''not''' work. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. :-( In order to make it work you need to download the latest driver from [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=84;71;100&PLine=71 the chipset manufacturer]. The version I used was "Linux kernel 3.x/2.6.x Driver" v4.4.0, released 2012-05-18. Fortunately this is GNU GPLv2 -licenced source code and not a binary blob, so compiling it for the Raspberry Pi is perfectly doable. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. >:-( Fortunately there is [https://www.grendelman.net/wp/compiling-kernel-modules-for-raspbian-raspberry-pi a very useful guide] for how to get the sources from github, and preparing that source so that you can compile modules. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make && sudo make install". Reboot and you should have a fully working ethernet adapter.<br />
<br />
The adapter seems to work without a powered USB hub, but according to the specifications it can draw up to 190 mA, so there might be stability issues if additional power is not provided.<br />
<br />
===Problem Ethernet adapters===<br />
* Axago<br />
** Axago ADE-X1 10/100 Ethernet Adapter (usb: 9710:7830 driver:mcs7830). Adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. Needed to unplug and plug USB again. Tested with and without powered USB hub.<br />
<br />
== USB Sound Cards ==<br />
You will usually want the <code>alsa</code> package for sound. In the Debian image for Raspberry Pi (and possibly other distributions) USB sound cards are prevented from loading as the first sound card, which can be an annoyance if it's the only device you have. To disable this behaviour edit <code>/etc/modprobe.d/alsa-base.conf</code> and comment out the last line; <code>options snd-usb-audio index=-2</code> . If you are not user ''pi'' you may need to add your username to the ''audio'' group thus: <code>sudo adduser yourusername audio</code> (user ''pi'' usually belongs to this group anyway).<br />
<br />
* '''Creative'''<br />
** [http://asia.creative.com/products/product.asp?category=1&subcategory=207&product=17892 Sound Blaster Play!]<br />
* '''Daffodil'''<br />
** [http://www.amazon.co.uk/gp/product/B002FI7GWK/ref=oh_details_o03_s00_i00 USB Sound Adaptor US01] ('''NB:''' Headphone output only checked so far, some notes on progress etc. can be found at [http://www.cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor.html cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor] - 14.09.2012)<br />
* '''Edirol'''<br />
** [http://www.roland.com/products/en/UA-1A/ UA-1A]<br />
* '''Hercules'''<br />
** [http://www.hercules.com/fr/Cartes-Son/bdd/p/123/gamesurround-muse-xl-pocket-lt3/ Gamesurround Musel XL (Pocket LT3)]<br />
* '''Logilink'''<br />
** [http://www.logilink.de/showproduct/UA0053.htm?seticlanguage=en UA0053 USB Soundcard with Virtual 3D Soundeffects LogiLink]<br />
* '''Terratec'''<br />
** [http://www.terratec.net/fr/produkte/Aureon_Dual_USB_12339.html Aureon Dual USB]<br />
<br />
==USB 3G Dongles==<br />
* Huawei E173<br />
* Huawei E220<br />
* Huawei E160 (AT commands only)<br />
* Franklin U600 from Sprint / VirginMobile<br />
** Use usb_modeswitch and vendor 0x1fac and product 0x0150/0x0151<br />
* Digicom Internet Key 7.2 HSUPA '''MU372-L01''' [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MU372L01]<br />
Tested on Raspbian and Archlinux. Detected as 230d:0001. Works with cdc_acm driver. Install usb_modeswitch.<br />
There are 2 "com ports"( /dev/ttyACM0 and /dev/ttyACM1 ) . Tested with Network Manager.Works also perfectly with SAKYS3G [http://www.sakis3g.org/] tools (!! led is always off !!) and wvdial. A working wvdial.conf : http://ubuntuforums.org/showpost.php?p=10361881&postcount=28 . (for example for Vodafone IT , replace Init3 with this : Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" and replace line Modem = /dev/ttyUSB0 with Modem = /dev/ttyACM1 ) and run with wvdial voda .<br />
<br />
== USB IR Receivers==<br />
SMK Manufacturing, Inc. eHome Infrared Receiver (Works out of the box with OpenELEC)<br />
<br />
== USB Radio devices==<br />
*FM Radio<br />
** ADS InstantFM Music - FM radio tuner works fine under debian.<br />
<br />
== USB TV Tuners and DVB devices==<br />
*August<br />
**DVB-T205, based on rtl2832u chipset, working with [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0 this driver]. Tested with Saorview (Irish DTT service), both HD & SD.<br />
*DVBSky<br />
**[http://dvbsky.eu/Products_S860.html Mystique SaTiX-S2 Sky USB]: Scanning/watching SD and HD works via vdr and streamdev plugin, watching on the Pi directly is laggy as hell. DVB-USB and I2C support must be enabled in the kernel. Needs drivers/firmware from [http://dvbsky.eu/Support.html here]. <br />
*Hauppauge<br />
** Hauppauge NOVA-T Stick (Revision 70xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge NOVA-TD Stick (Revision 52xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge WinTV-HVR-1950 (tested analog tuner with omxplayer)<br />
*K-World<br />
** K-World UB499-2T Dual DVB-T USB Tuner. IT9137 chipset. With no other USB devices connected Pi can just about power this stick. IR and supplied remote work with XBMC.<br />
*Technisat<br />
**Technisat_SkyStar_USB_HD. Instructions: http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_HD Used the Pi to receive and redirect it via network to another host. Didn't try to play back the stream on the Pi itself. Tested with Astra 19.2E radio and SD-TV channels<br />
*Generic<br />
** [http://www.onsources.com/product_images/a/757/watch_and_record_digital_tv_dongle__44323_zoom.jpg DVB-T USB Dongle (Silver casing)], based on AF9015 chipset.<br />
** [http://www.electrodepot.fr/media/catalog/product/cache/1/image/500x/9df78eab33525d08d6e5fb8d27136e95/P926993.jpg DVB-T USB Dongle], based on RTL2832 FC12 (HD/SD), IR detected but not tested<br />
<br />
== USB Webcams ==<br />
<br />
Debian image is missing v4l kernel modules, so video devices are not available. Kernel and firmware upgrade can possibly be used to fix this[http://blog.pixelami.com/2012/06/raspberry-pi-firmware-update-for-debian-squeeze/].<br />
<br />
===Working USB Webcams===<br />
*'''Creative'''<br />
**Creative VF0470 Live! (works out of the box on ArchLinux)<br />
**Creative VF0260 Live! Cam Vista IM (works out of the box)<br />
**Creative VF0640 Live! Cam Socialize (works on Raspbian at 320x240 resolution, 15fps)<br />
**Webcam Notebook PD1170 (detects, untested)<br />
<br />
*'''HP'''<br />
**Webcam HD-2200 [http://www.amazon.com/HP-Webcam-HD-2200-BR384AA-ABA/dp/B004UR9P9Q/ (Amazon)] [http://shopping.hp.com/en_US/home-office/-/products/Electronics/Webcams/BR384AA?HP-HD-2200-Webcam (HP)] [http://www.walmart.com/ip/HP-Webcam-HD-2200/16775645 (Walmart)] <br />
**Webcam HP-3100 - UVCVideo /dev/video0 Needs chmod to 666 to operate. Will work without hub if only device in USB ports. Works with both Arch and wheezy out of the box<br />
<br />
*'''Logitech'''<br />
**Webcam C100 Model Number V-U0013 (works fine without powered hub - Tested on 2012-08-16-wheezy-raspbian image - motion detection was good - video streaming was really slow might be unusable)<br />
**Webcam C200<br />
**Webcam C270 (with external power)<br />
**Webcam C310 does not require a powered hub to capture snapshots<br />
**Webcam C510<br />
**Webcam C525 (works fine without powered hub)<br />
**HD Webcam C615 (works fine without powered hub)<br />
**Webcam C910 (with external power, is uncvideo)<br />
**QuickCam Orbit/Sphere USB webcam (ext. power) <br />
**QuickCam Pro 9000 - powered by Raspi, working on debian wheezy<br />
**Webcam Pro 9000 (046d:0809), powered by RPi (measured ~120 mA capturing at ~5 fps), works on Arch<br />
<br />
*'''Medion'''<br />
** MD86511 - powered by Raspi, working on Raspbian “wheezy” from 2012-07-15<br />
<br />
*'''Microsoft'''<br />
**Xbox Live Vision camera (045e:0294), powered by Raspi, working on Arch<br />
**LifeCam Cinema 720p USB HD Webcam H5D-00001 - Powered by USB Hub. Working on Raspbian "wheezy"<br />
**LifeCam HD-6000 - Powered by Raspberry Pi. Working on Raspbian "wheezy" (2012-07-15)<br />
**LifeCam NX-6000 - Powered by Raspberry Pi. Working on Debian "wheezy"<br />
**LifeCam VX-7000 - Powered by USB Hub. Working on Raspian "wheezy"<br />
**LifeCam VX-3000 - On "raspbian" wheezy (though there do appear to be some issues with image quality and getting partial frames and such, with fswebcam)<br />
**LifeCam VX-800 - Powered by Raspberry Pi. Working out of the box on Raspbian [http://www.amazon.it/Microsoft-JSD-00008-LifeCam-VX-800/dp/B0057FWVSC (Amazon)] Doesn't work at full 640 * 480 resolution but OK at 352 * 288.<br />
<br />
*'''Sony'''<br />
**PlayStation Eye (for PlayStation 3) (the occasional frame is corrupted/stutters when running at 640x480)<br />
**PlayStation Eyetoy (for PlayStation 2) (Occasional 'mangled frame' directly connected to Rev 2 Pi)<br />
<br />
*'''Trust'''<br />
** 2MP Auto Focus Webcam (works out of the box on ArchLinux)<br />
<br />
===Problem USB Webcams===<br />
<br />
*'''Creative'''<br />
**WebCam Pro / PD1030 - ov519 driver crashes almost immediately. ("gspca: ISOC data error: [0] len=0, status=-4004")<br />
<br />
*'''Logitech'''<br />
**Webcam Pro 9000 - Has issues capturing images at higher than default resolutions (using motion - Arch and Debian).<br />
**Webcam Pro 4000 - It uses pwc driver which does not work. Maybe it's because of general Raspi USB bug.<br />
<br />
*'''Microsoft'''<br />
**Lifecam HD5000 - Picture breaks up at the bottom<br />
**LifeCam Studio/Cinema - Has UVC issues detailed here [http://www.ideasonboard.org/uvc/#devices]. Horizontal lines problem [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12304]. Stability issues [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12247].<br />
<br />
*'''Sony'''<br />
**Eye Toy (PlayStation 2) model SLEH 00030 - (OV519 camera). Picture constantly breaks up on xawtv and wxcam under Arch Linux. Noted there were ISOC data error len=0 status=-4004 errors in dmesg. This happens when powered from the Pi and when powered from a Pluscom USB hub. Arch was updated on 17th July 2012<br />
<br />
*'''Trust'''<br />
**SPACEC@M 200 - (OV511 camera). Picture stops after a few seconds in xawtv under Arch Linux and xawtv reports libv4l2 errors. This happens when powered from the Pi and when powered from a Pluscom USB Hub. Arch was updated on 17th July 2012<br />
<br />
== USB GPS devices ==<br />
*Royaltek<br />
**Royaltek RGM 2000 SiRF2 using the included serial (TTL) to USB - converter. That uses a Profilic pl2303-chip so you'll need to compile the module or the kernel manually<br />
*Garmin<br />
**Garmin eTrex Vista HCx: Works but may draw much power. To get it working (software part): https://wiki.openstreetmap.org/wiki/USB_Garmin_on_GNU/Linux<br />
*GlobalSat<br />
**GlobalSat BU-353 Does not require a powered hub, works fine when directly plugged into the RPi. On Raspian, requires the gpsd and gpsd-client packages. For some reason, the gpsd daemon does not always start correctly on boot. You may need to do something like the following to manually restart it:<br /><pre>sudo killall gpsd; sudo gpsd /dev/ttyUSB0 -F /var/run/gpsd.sock</pre><br />
<br />
*Wintec<br />
**WBT-200: No problem on Debian<br />
*Holux<br />
**Holux M-215: Works fine on Arch, uses Silicon Labs CP210x RS232 serial adaptor driver<br />
*Bluenext<br />
**Bluenext BN903S: No problem on Debian image (19-04-2012).<br />
<br />
== USB UART adapters ==<br />
The USB UART adapter is used to access the serial console of the Raspberry Pi from a development host such as a laptop or desktop PC. The USB end connects to the PC and the UART header end connects to the USB. While it is possible to connect the USB end to another Raspberry Pi, this configuration has not been tested unless explicitly mentioned against an individual entry below.<br />
<br />
*'''FTDI'''<br />
**FT232 chip based adapters works for some people but others find it hangs Linux when the port is opened. module is ftdi_sio<br />
<br />
** FT2232D dual RS232/FIFO works (used in various JTAG devices)<br />
<br />
*Prolific<br />
**PL2303 chip based adaptors works fine on latest Debian tested with minicom and gtkterm<br />
<br />
== Other, exotic USB devices ==<br />
=== CAN Bus ===<br />
*PEAK-System (www.peak-system.com)<br />
**PCAN-USB using the driver (kernel module) from http://www.peak-system.com/fileadmin/media/linux/index.htm<br />
=== Home automation ===<br />
*Tellstick (www.telldus.com), installation [[R-Pi_Tellstick_core|instructions]]<br />
**Depends on libftdi1<br />
<br />
=== Touch Screen ===<br />
*ACER T230H touch screen [http://support.acer.com/acerpanam/monitor/2009/acer/t230h/t230hnv.shtml]<br />
**USB TS identifies as "Quanta Computer, Inc. Optical dual-touch panel", module hid_quanta<br />
**Seems to draw over 200 mA from USB!<br />
=== Floppy Disk Drive ===<br />
*Samsung USB Floppy Drive SFD-321U/HP<br />
**I suppose a floppy drive might be considered exotic nowadays!<br />
**LSUSB lists it as Samsung Electro-Mechanics Co. Floppy Disk Drive<br />
**Only tried connected to a powered USB hub, as the drive is labelled 5V at 0.5A on a Raspberry Pi running Debian Wheezy.<br />
**tail -f /var/log/syslog looking for mount device when plugged in, came up as SDA in testing.<br />
**sudo mkdir /media/floppy<br />
**sudo mount /dev/sda /media/floppy<br />
**Contents of floppy now available in /media/floppy<br />
**To remove drive, ensure no sessions have the floppy directory as the current working directory.<br />
**sudo umount /media/floppy<br />
=== USB Missile Launcher ===<br />
*USB Missile Launcher / Rocket Launcher sold in UK by Marks and Spencer but also sold under a range of other names.<br />
**USB ID 1130:0202 Tenx Technology, Inc. Use apt-get install pymissile (python code) and there is C code at [http://sourceforge.net/projects/usbmissile/ usbmissile from Source Forge]<br />
=== USB Docking Stations ===<br />
*StarTech USB 3.0 to Dual 2.5"/3.5" SATA HDD Dock (SATDOCK2U3GB)<br />
**This is an externally powered dual sata HDD docking station, which has USB2.0 compatibility with the Pi. <br />
**Tested with latest raspbmc and debian wheezy raspbian, 3.1.9+ #168<br />
=== USB RFID Reader ===<br />
*Unbranded 125KHz EM4100 RFID reader from eBay sellers (< £7), the one with a Windows logo on (easily scratches off for Linux users).<br />
**Initially would not work when plugged in directly to RPi. Worked when connected via an unpowered Trust hub. Worked after RPi was modified with 10K resistors over the USB polyfuses (warranty invalidated). Probably would work fine with powered hub.<br />
**Sends a 10 digit string to current window or console as if it was a keyboard. Can be captured independently of keyboard using Linux event interface (/dev/input) but kernel in current distributions does not have CONFIG_INPUT_EVDEV selected so kernel rebuild is necessary.<br />
=== JTAG ===<br />
* FTDI2232D dual RS232/FIFO based JTAG (e.g. SheevaPlug JTAGKey USB-ID 9e88:9e8f)<br />
** works using the RPi as a development host<br />
<br />
== PS2 / AT to USB Converters ==<br />
<br />
* Unbranded active converter known as the "blue cube". Based on the Cypress CY7C63723C 8 bit RISC. Please see http://geekhack.org/showwiki.php?title=PS2-to-USB+adapters for more information.<br />
Note that although the adapter might work, PS/2 keyboards were not designed to be low power USB devices, so they might not meet the requirement to work with considerable lowered supply voltage (4.4 volt) provided by the USB ports of the raspberry PI. These keyboards should work when powered by a powered hub. <br />
<br />
'''Tested PS2/AT keybords'''<br />
<br />
All above tested with the famous "blue cube" on a powered USB hub.<br />
<br />
*IBM Model F (please note requires an additional AT to PS2 converter)<br />
*Dell AT101w<br />
*Northgate Ominikey Ultra T (please note requires an aditonal AT to PS2 converter)<br />
<br />
* 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller<br />
** Working: Ipex RT215KTW PS/2 keyboard<br />
** Not working: HP SK-2502 PS/2 keyboard (gets power but does not init - three LEDs remain permanently lit. Keyboard + Holtek converter work on a Linux PC, although this keyboard doesn't work with some native PS/2 ports.)<br />
<br />
== Power adapters ==<br />
The Raspberry Pi uses a standard Micro USB (type B) power connector, which runs at 5v. Generally you can use a MicroUSB to USB cable and then either power the Raspberry Pi directly from your main computers USB ports (if they provide enough power), or by using a USB to Mains adaptor. A number of mobile phones use MicroUSB power cables, and these are compatible with the Raspberry Pi in most cases. Below is a list of power adaptors known to work.<br />
<br />
===Working power Adapters===<br />
* '''AlcaPower'''<br />
** 5V 2.5A Model AP5A - Charger/switching with 7 connectors(also Microusb)<br />
* '''Ansmann'''<br />
*** Dual USB charger slim, Model-Nr. 1201-0001<br />
* '''Apple'''<br />
** 5V 2.1A USB charger for iPad2, model A1357<br />
** 5V 1.0A USB Charger for iPod<br />
** 5V 1.0A USB Charger for iPhone 4<br />
* '''Amazon'''<br />
** 5V 0.85A USB charger for Kindle<br />
** 5V 2A Mains to USB A adaptor, Branded "CostMad" <br />
* '''Asus'''<br />
** 5V 2.0A USB charger for Google Nexus 7<br />
* '''Belkin'''<br />
** 5V 2.6A 4 port Ultra-Slim Desktop hub (Model F4U040) (RPi running from USB Hub port)<br />
** 5V 2.5A 4 port USB Hub (Model F5U404) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB 2.0 Mobile Powered Hub (Model F4U018) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB Hub (Model F5U706) (RPi running from USB Hub port)<br />
** Mini Surge Protector Dual USB Charger (Model BZ103050-TVL)<br />
** Universal USB Wall Charger (5V 1A) (Model F8Z222uk)<br />
* '''Blackberry'''<br />
** Charger for Pearl Flip 8220, Bold 9600 (B)<br />
** Charger for Tour 9630<br />
** 5V 0.7A Model PSM04R-0500CHW1(M), RIM Part Number HDW-17957-003 (B)<br />
** 5v 750mA Model RIM-C-0004aDUUUC-001, RIM Part Number HWD-24481-001 (comes with Blackberry 9300)<br />
** 5v 750mA Model RIM-C-0004ADUUS-001 035D, Single port plug. (Tested with USB B to Micro USB cable from Logitech H760 Headset)<br />
** 5V 2A Model PSAC10R-050QT, RIM Part Number HDW-34725-001<br />
* '''Dell'''<br />
** USB Hub integrated in Dell monitors (B)<br />
* '''Garmin'''<br />
** 5V 1A charger (Model: PSA105R-050Q) supplied with Garmin Edge 800 GPS. Requires a USB-A to MicroUSB-B cable. Belkin 6ft cable (F3U151B06) works.<br />
* '''Griffin'''<br />
** Power Block Model P2417. 5V 2.1A<br />
** Power Block Model P1190R2 Two USB 5V Outputs, 1Amp each<br />
* '''Hama'''<br />
** 1000mA Travel Charger for Micro USB universal (barcode nr: 4 007249 935854)<br />
* '''HP'''<br />
** 5.3V 2A Charger for HP Touchpad (B)<br />
* '''HTC'''<br />
** 5V 1A TCP-300 USB phone charger (B)<br />
** 5V 1A TC B250 USB charger (HTC R/N: 79H00096-00M)<br />
** 5V 1A TC E250 USB charger (HTC R/N: 79H00098-02M)<br />
* '''i-box (Philex Electronic Ltd)'''<br />
** 5V 1A USB charger, 1 USB socket, no USB lead supplied, Model: 76971HS/02 (available from ASDA and others in the UK) (B).<br />
* '''IDAPT'''<br />
** [http://www.idaptweb.com/universal_chargers/i4/ i4 multi device charger] - 3 interchangeable device tips + USB A socket ([https://twitter.com/andrewmk/status/226057302879375361 see it in use])<br />
* '''Innergie'''<br />
**15W Dual USB Adapter. Model: mMini AC15. Output: 5V, 3A (max per port), 15W max. [http://www.myinnergie.com/DuoPowerKit/specification.aspx Spec Sheet]<br />
* '''Kodak'''<br />
** 5V 1A TESA5G1-0501200<br />
** 5V 1.0A K20-AM<br />
* '''LG'''<br />
** 4.8V 1A Travel Adapter<br />
**5.1V 0.7A Travel Adapter (Model: STA-U34WVI)<br />
**5.1V 0.7A Travel Adapter (Model: STA-U12ER)<br />
* '''Logic'''<br />
** 4 port USB Hub (Model LP4HUB10). (RPi running from USB Hub port, red power line (+5v) inside hub cut) (B)<br />
*'''LogiLink'''<br />
**5V 2.1A Switching power supply, model PA0040 (B)<br />
* '''Logitech'''<br />
** 5V 1A SDC115-USB Remote Control Charger and cable<br />
* '''Maplin Electronics'''<br />
** 5V 1A dual USB power supply, model number H25B-MT-K2<br />
** Micro USB Power Supply N19HX<br />
* '''Medion'''<br />
** 5V 1A USB power supply for OYO ebook reader<br />
* '''Microsoft'''<br />
*** Zune Zune AC Adapter v2 <br />
* '''Motorola'''<br />
** [http://www.amazon.com/Motorola-Micro-USB-Home-Travel-Charger/dp/B004EYSKM8/ 5V 0.85A SPN5504 Charger with Cable]<br />
* '''Nokia'''<br />
** 5V 1.2A AC-10E Charger<br />
** [http://accessories.nokia.com/products/nokia-fast-usb-charger-ac-16/ 5V 1A AC-16E Charger]<br />
* '''Noname'''<br />
** 5V 2.1A KMS-AC09 4 port USB charger (B) [http://www.miniinthebox.com/kms-ac09-universal-ac-adapter-for-ipad-ipad-2-iphone-white_p208568.html]<br />
** 5.2V 1A MW-3NU10GT - no cable, but this one works well (1m): [http://www.amazon.de/gp/product/B005L8VELA]<br />
** 5V 1A Model H-IP008 Serial No. H10T80L068<br />
* '''Novatel Wireless'''<br />
** 5V 1.05A Charger, model number SSW-1811, packaged with Verizon Wireless MiFi device<br />
* '''Orange'''<br />
** 5V 0.7A Charger for Orange San Francisco<br />
* '''Palm'''<br />
** 5V 1A Charger for Palm Pixi+ (B)<br />
* '''Pantech'''<br />
** 5.0V 1A CNR USB with LG DLC100 micro usb cable<br />
* '''Phihong'''<br />
** Switching Power Supply. Model: PSAC09R-050. Output: 5V, 1.8A, microUSB. [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]<br />
* '''PortaPow'''<br />
** PortaPow UK Mains Wall Power Supply<br />
* '''RS Components'<br />
** HNP06UK (RS 7263069) Switching Adapter 5.0V 1200mA<br />
* '''Samsung'''<br />
** 5V 0.7A Charger for Galaxy S model ETA0U10EBE<br />
** 5V 0.7A Charger for Galaxy SII<br />
** 5V 1A Charger for Galaxy Nexus<br />
** 5V 0.7A Charger for Galaxy S Vibrant (SGH-T959)<br />
** 5V 0.7A Travel Adapter model ATADU10EBE<br />
** 5V 1A? Samsung C Series TV USB-port for external HDDs. Running stable with openelec<br />
** 5v ?A(Unknown) Samsung Service Port (USB) on LN32A330J1DXZA 720p 32 inch HDTV <br />
** 5V Unknown Ampere Samsung UA22D5000 & UA32D5000 TV USB Port. Test with Raspbian Wheezy, Raspbmc, and RPITC<br />
* '''Shun Shing'''<br />
** 100-240VAC to 5VDC 1A USB power supply, model SP5Q-AU [http://jaycar.co.nz/productView.asp?ID=MP3455 Jaycar]<br />
* '''Sony Ericsson'''<br />
** 5V 0.7A Charger CST-80<br />
* '''Travel Charger'''<br />
** 5V 2.0A USB Power Adapter, [http://www.amazon.co.uk/gp/product/B0065JCIPU/ Amazon Link]<br />
* '''Technika'''<br />
** 5V 1A USB Power Adapter, model MPASS01 (B)<br />
* '''The Pi Hut'''<br />
** Micro USB Power Supply for the Raspberry Pi. 5V 1000mA (from [http://thepihut.com/products/micro-usb-power-supply-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store]) (also from [http://www.ebay.co.uk/itm/330757401271 eBay ])<br />
* '''Trisonic'''<br />
** TS-CP600T - MICRO USB HOME & TRAVEL CHARGER (5V, 800mA) $3 at Daiso U.S. stores.<br />
* '''TruePower'''<br />
** [http://u-socket.com/ U-Socket] 5V 2.1A AC Receptacle with Built-in USB ports (2.1A per USB port) model ACE-7169<br />
* '''Voltcraft'''<br />
** SPS5-12W, 2500 mA, requires additional USB <-> miniUSB adapter/cable, works perfectly (bought from [http://www.conrad.de/ce/de/product/512660/VOLTCRAFT-SPS5-12W-Steckernetzteil-Steckernetzgeraet-5-VDC-2500-mA-12-Watt Conrad Shop])<br />
<br />
===Problem power Adapters===<br />
* '''Masterplug'''<br />
** Masterplug Surge Protected USB Adaptor 2 x 1A USB Polished Black - USB ports and ethernet don't work with this adapter and some screen artefacts using HDMI.<br />
* '''Monoprice'''<br />
** 5v, 2A 3 Outlet Power Surge Protector Wall Tap w/ 2 Built-In USB Charger - some display artifacts, sometimes unable to find mouse, some failures to boot. Measured less than 4.75v between TP1 and TP2 when used with a Monoprice cable.<br />
* '''Sony Ericsson'''<br />
** 5v, 850mA EP800. Some failures to boot , ethernet loops at boot.<br />
<br />
===External Battery packs (with 5V regulated output)===<br />
* '''Anker Astro3'''<br />
** Anker Astro3 10000mAh with Dual 2A USB Output<br />
* '''Duracell'''<br />
** PPS2 Instant USB Charger<br />
* '''Energizer/XPAL'''<br />
** XP18000 18000mAh Power Pack<br />
* '''Generic - eBay no brand'''<br />
** 6000T Pocket Power 5000mAh - eBay item 271009959140<br />
** Power Bank for iPad/iPhone 5000mAh (looks the same as a New Trent IMP50D or TeckNet iEP380) - eBay item 280914455938<br />
* '''New Trent'''<br />
** iCurve IMP70D 7000mAh (Approx 12hrs from full charge)<br />
** IMP120D 12000mAh<br />
* '''Sinoele'''<br />
** Movpower - Power Bank 5200mAh (8hrs with Wifi active)<br />
* '''TeckNet'''<br />
** iEP387 Dual-Port 7000mAh External Power Bank (The charging lead can be used to connect the Tecknet to the RPi. Ran the RPi with wifi dongle and wireless keyboard receiver for over 9 hours of light use.)<br />
** iEP392 Dual-Port 12000mAh External Power Bank (1A port, ~16.5 hours)<br />
** Rayovac PS60 5v 800mAh<br />
* '''VINZO'''<br />
** Power Bank 5000mAh Grey Output 5V 1000mA<br />
* '''Kodak Power Pack KP1000'''<br />
** 1A USB rechargeable battery pack - see [http://blog.sheasilverman.com/2012/09/its-alive/ Shea Silverman's blog]<br />
<br />
== Display adapters ==<br />
Note that active converter boxes may draw power through the HDMI port, and thus will put an extra load on your PSU, and also increase the current running through the PI's primary input fuse. HDMI ports (and the raspberry PI) are designed so that they deliver a very limited amount of power (50mA) to the TV/Monitor/display-adapter and much more isn't in theory allowed. In fact there is a diode (D1) in series with the power line which can only handle 200mA, if the adapter tries to draw much more than that the diode might fail. Therefore only externally powered adapters are to be recommended. Despite this, many people report success with these high powered devices.<br />
<br />
===HDMI->DVI-D===<br />
There are three kinds of DVI. There is DVI-D, a digital signal fully compatible with HDMI, so a passive cable can be used. There is DVI-I, which is a connector with both analog pins and digital pins. An HDMI to DVI-D adapter fits in a DVI-I female connector. Finally, there is DVI-A. This a fairly rare connection, but occasionally it will be found on some monitors and is an analog interface, in fact the same as VGA!<br />
<br />
Some adapters like Farnell part AK-CBHD03-BK are HDMI to DVI-I, which, while not fitting in a DVI-D monitor, are still compatible. The analog pins simply must be bent.<br />
<br />
The HDMI to DVI-D cable provided by Apple with the 2010 Mac Mini worked. It does not appear this adapter can be purchased separately.<br />
<br />
* AmazonBasics HDMI to DVI Adapter Cable (model SK231) works and is inexpensive.<br />
* [http://www.ebay.com/itm/DVI-Female-to-HDMI-Male-Adapter-Converter-Adaptor-Gold-for-HDTV-Full-HD-/320946033059?pt=US_Video_Cables_Adapters&hash=item4ab9dfd1a3 A generic HDMI-to-DVI converter from eBay]. Works well, but it's probably the cause of some power loss between the RPi and the monitor, causing [http://elinux.org/R-Pi_Troubleshooting#Interference_visible_on_a_HDMI_or_DVI_monitor this] problem. A setting of config_hdmi_boost='''5''' in /etc/boot solved this. Note that config_hdmi_boost='''4''', as suggested in the troubleshooting guide, helped but did not solve the problem completely.<br />
<br />
===HDMI->VGA converter boxes===<br />
Most will require use [[RPi_config.txt]]. Start off with hdmi_safe=1.<br />
<br />
[http://www.element14.com/community/groups/raspberry-pi/blog/2012/08/16/raspberry-pi-hdmi-to-vga-converter Sanoxy HDMI to VGA converter], $27 from Amazon, no changes required with official Raspbian Wheezy image (2012-Jul-15), note: had already disabled overscan previously<br />
<br />
http://www.amazon.co.uk/gp/product/B007KEIRNG -- "Neewer" HDMI to VGA -- some issues discussed below:<br />
However, according to user "Tom1989" the same Neewer HDMI to VGA adapter burned out BAT54 Schottky diode D1 on the RasPi and broke its HDMI output: [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9819 Serious HDMI Problems. What's that smell? Burning Raspberry!]. On that thread, "mahjongg" suggested the NXP (or equivalent) PMEG2010AET as a high-current replacement for D1. The PMEG2010AET has 1A max forward current, much greater than the BAT54's 200 mA limit which may be exceeded by your HDMI -> VGA converter. Remember that the converter's current must come from your RasPi power supply and go through the Micro USB cable and polyfuse F3, so you may get extra voltage drops and/or cause F3 to trip depending on how much current the converter uses. As always with board modifications, YMMV. Also on the "Burning Raspberry!" thread, user "pwinwood" reported the Neewer's current to be 400 mA, which is twice the limit of BAT54 diode D1. "pwinwood" also took the Neewer apart and added its own +5V connection adapted from a USB cable, which bypasses RasPi's Micro USB cable and polyfuse F3.<br />
<br />
http://www.amazon.co.uk/KanaaN-Adapter-Converter-Cable-Resolutions/dp/B007QT0NNW -- "Kanaan" HDMI-VGA<br />
<br />
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130699741793 -- eBay is swarming with $16 converters all like this one.<br />
<br />
This adapter -- http://www.ebay.co.uk/itm/300692770623 -- works from 640x480 up to 1920x1080, audio over HDMI works too.<br />
Sadly the IC's on the PCB have all been scrubbed.<br />
Requires HDMI boost and overscan, [[RPi_config.txt|config.txt]] settings for 640x480@60Hz:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=4<br />
<br>config_hdmi_boost=4<br />
<br>overscan_top=-30<br />
<br>overscan_bottom=-30<br />
<br>overscan_left=-30<br />
<br>overscan_right=-30<br />
<br />
According to user "Mortimer" -- HDFuryPro HDMI to YPbBr/VGA Converter found on Amazon -- http://www.amazon.co.uk/Inputs-Component-Video-YPbPr-Converter/dp/B00797ZZ4S/ -- Works with Raspberry Pi. Tested against a Philips 170B 1280x1024 LCD monitor, producing a full native resolution image. Not tested against a Component Video TV yet, and audio has yet to be got working.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
<br />
According to user "Mortimer" -- HDFury1 1080p HDMI to VGA Converter from HDFury.com. I'm not sure the HDFury1 can be got a hold of easily nowadays, I happened to have access to one to try out. HDFury2, 3 and 4 are available as far as I can tell, but are very pricey compared to alternatives. HDFury1 was around £80 when we bought one for a project at work. HDFury2 seems to be around £130, 3 and 4 are getting on towards £200 or more. So not to be recommended as a solution unless you happen to have one lying around. I don't believe there is any relationship between the company that produces these and the HDFuryPro I bought for myself (See above). I didn't alter any config settings, just plugged it in. It doesn't work without having its external power supply connected, as it requires 0.4A, which is too much draw for the 5V supply available from the HDMI socket on the Raspberry Pi. Its power LED lights, but no picture is produced. In comparison to the HDFuryPro this picture from this device is sharper, but not enough to justify the extra cost.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
http://www.amazon.co.uk/gp/product/B007SM7O2U/ref=oh_details_o02_s00_i00 - "Cable Matters"<br />
<br />
Here It is another option: http://www.dealextreme.com/p/hdmi-v1-4-male-to-vga-female-converter-adapter-cable-white-15cm-130458, is cheap (it's free shipping from china) and works perfectly, I tested it with an Acer VGA monitor (AL1511), without no change in my XBMC distribution.<br />
The config.txt for Raspbian (Flatron VGA monitor 1024 * 768):<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=16<br />
<br>hdmi_force_hotplug=1<br />
<br>disable_overscan=0<br />
<br />
<br />
And another one: http://cgi.ebay.pl/ws/eBayISAPI.dll?ViewItem&item=251086464644. Very cheap but works perfectly. No config.txt changes was needed at all. I've booted Raspbian and OpenELEC. Monitor is detected correctly and the optimal resolution is set (Raspbian) or you can change the res in the menu (OpenELEC). <br />
The /opt/vc/bin/tvservice is able to read monitor edid data. I tested the adapter using NEC 72VM 15" LCD. (1280x1024 60Hz, 1024x768 60Hz, 640x480 works) The adapter is based on Lontium LT8511A chip, but I was unable to get the spec for it.<br />
The D1 diode is getting very hot though. Most likely the adapter drives more than 200mA. The standard RS Components 1,2A usb power supply is able to provide enough power for the RPi and the adapter. I'll try to modify the adapter to connect external power to bypass D1.<br />
Marcin.<br />
<br />
===DVI-D -> VGA active adapters===<br />
None are currently listed<br />
<br />
===Composite->SCART===<br />
SCART adapters (SCART plugs with three RCA connectors in the back), will probably work when used with the yellow RCA plug connected to the R-PI's RCA video output. Additionally using a splitter cable (3.5mm jack plug on one end, and red-white RCA plugs on the other end) will probably work when plugged into the red and white (left and right audio channels) of the SCART adapter.<br />
<br />
* Generic - works<br />
<br />
===Composite->VGA converter boxes===<br />
* [http://www.extron.com/product/product.aspx?id=dvs204| Extron DVS-204] - works no problem!<br />
<br />
== SD cards ==<br />
<br />
Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)<br />
For this reason, please specify product numbers in the lists below, when possible.<br />
<br />
You can also attach the following fields from your card's CID :<br />
<pre><br />
cd /sys/class/mmc_host/mmc?/mmc?:*<br />
echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"<br />
</pre><br />
<br />
please merge with http://elinux.org/RPi_Performance#SD_card<br />
<br />
===Preinstalled SD Cards===<br />
Sandisk SD Cards Preinstalled with the latest Raspbian operating system are available from [http://thepihut.com The Pi Hut's Raspberry Pi Store].<br />
* '''SanDisk''' <br />
** [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
<br />
===Working SD Cards===<br />
* '''7DAYSHOP.COM''' <br />
** 8GB Professional SDHC Class 10 (man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0)<br />
* '''Adata''' <br />
** 2GB SD Class 2 Speedy (8B0947 printed on back) This card works with every distro I tried. May be old, may not be the fastest, but is very stable.<br />
** 4GB SDHC Class 4 (BH1109416141G)<br />
** 8GB SDHC Class 2 (MMB3F08GWMCA-GE)<br />
** 8GB SDHC Class 4 (MicroSD w/ adapter)<br />
** 8GB SDHC Class 6 (MMAGR08GUDCA-DB)<br />
** 8GB SDHC Class 10 (AUSDH8GCL10-R)<br />
** 8GB SDHC Class 10 (ASDH8GCL10-R) Tested on 2012-06-18-wheezy-beta.zip<br />
** 8GB SDHC Class 10 (P-SDH8G10-EC from BJ's USA tested on Raspbian)<br />
** 16GB SDHC Class 6<br />
** 16GB SDHC Class 10 (16GSDHC10)<br />
** 16GB SDHC Class 10 (microSD w/ adapter AUSDH16GCL10-RA1)<br />
** 32GB SDHC Class 10 (ASDH32GCL10-R) Tested on wheezy-beta with latest kernel and firmware and raspbian wheezy<br />
* '''AmazonBasics'''<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH0LS 8GB SDHC Class 10 B0058GH0LS]<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH1IK 16GB SDHC Class 10 B0058GH1IK]<br />
** 32GB SDHC Class 10<br />
* '''Apacer'''<br />
** 8GB microSDHC Class 10 (with adapter)<br />
** 8GB SDHC Class 6<br />
* '''Centon'''<br />
** 16GB SDHC Class 4 (1447 printed on back)<br />
* '''CnMemory'''<br />
** 8GB SDHC Class 4 (Silver/Black label says 'High Capacity Card') 84209_8GB_SDHC, bought from Maplins. No error messages seen, but operation is much slower than with a SanDisk 4GB Class 4 card.<br />
* '''Dane-Elec''' <br />
** 16GB SDHC Class 4<br />
** 16GB Pro 200X Class 10 DEMS16GB2683ENBA<br />
* '''Dikom'''<br />
** 16GB SDHC Class 10 (serial 207H3MD016IBSD)<br />
* '''Duracell'''<br />
** 4GB SDHC Class 4<br />
** 16GB SDHC Class 10 (labelled Pro Photo 200x)<br />
** 32GB SDHC Class 10 (man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0) (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012, following [[RPi_Performance#SD_card]])<br />
* '''Emtec''' <br />
** 2GB SD man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0<br />
** 4GB SDHC Class 4 (EKMSD4G60XHCN)<br />
** 16GB SDHC Class 10 (EKMSD16G150XHC) (less than half as fast as Sandisk 16gb Class 10)<br />
* '''Extrememory''' <br />
** 16GB SDHC Class 10 (man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0)<br />
** 32GB SDHC Class 10 (man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0)<br />
* '''Eye-Fi'''<br />
** 4GB WiFi SDHC (Wi-Fi doesn't work)<br />
* '''Fugi''' <br />
** 32GB SDHC Class 10 (P10NM00580A) (man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0)<br />
* '''Hama''' <br />
** 2GB SD Class 2<br />
** 8GB SDHC High Speed Pro Class 6<br />
* '''Hema (Dutch dept. store)'''<br />
** 4GB<br />
** 8GB SDHC Class 4<br />
* '''Goodram''' <br />
** 8GB microSDHC Class 4<br />
** 16GB microSDHC Class 4 (SDU16GHCAGRR10)<br />
** 16GB SDHC Class 10<br />
* '''HP'''<br />
** 8GB SDHC Class 4 (doesn't reboot during first time startup process, but restart again and fine after that).<br />
** [http://www.amazon.com/HP-CG790A-AZ-Flash-Memory-Class/dp/B007X7U224 32GB SDHC Class 10] <br />
* '''ICIDU'''<br />
** 4GB SDHC Class 10 (also had no issues)<br />
** 16GB SDHC Class 10 (image write had issues, might be my inexperience. It boots & shows Xserver)<br />
** 32GB SDHC Class 10 (had no issues whatsoever, the comment above might be a dud.)<br />
** 8GB microSDHC Class 10<br />
** 16GB microSDHC Class 10 (20MB/sec)<br />
** 32GB microSDHC Class 10 (20MB/sec)<br />
* '''Integral''' <br />
** 4GB SDHC Ultima Pro Class 10<br />
** 4GB SDHC Class 4 SD-K04G (Purple label)<br />
** 8GB SDHC Ultima Pro Class 6 (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 8GB SDHC Ultima Pro Class 10 (20MB/s) (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 16GB SDHC Ultima Pro Class 6<br />
** [http://www.amazon.co.uk/gp/product/B0047T6XME 16GB SDHC Class 10 Ultima Pro (20MB/s)]<br />
** 32GB SDHC Ultima Pro Class 10 (20MB/s) - Slow to initially boot past the Rainbow Screen.<br />
* '''Joyflash''' <br />
** 16GB SDHC Class 10 (LTSD1112016GB)<br />
* '''Kingmax''' <br />
** 4GB SDHC Class 2<br />
** 4GB microSDHC Class 4 (KM04GMCSDHC4) won`t reboot when it`s hot<br />
** 8GB microSDHC Class 4 (KM08GMCSDHC41A) won`t reboot when it`s hot<br />
* '''Kingston''' <br />
** 2GB SD<br />
** 2GB microSD (N0185-002.A00LF) + Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510)<br />
** 4GB microSD Class 4<br />
** 4GB SDHC Class 4 (SD4/4GB)<br />
** 4GB SDHC Class 10 (SD10V/4GB)<br />
** [http://img341.imageshack.us/img341/1619/dsc0253y.jpg 8GB SDHC Class 4] ([http://img833.imageshack.us/img833/2028/dsc0254br.jpg SD4/8GB]) (does not work with current build of raspbmc)<br />
** [http://img600.imageshack.us/img600/3849/dsc0251et.jpg 8GB microSDHC Class 4] ([http://img707.imageshack.us/img707/363/dsc0252ld.jpg SDC4/8GB])<br />
** 8GB SDHC Class 6 (SD6/8GB) (errors on boot, boots Debian ok, does not work with raspbmc rc2)<br />
** 8GB SDHC Class 10 (SD10G2/8GB, SD10V/8GB, ultimateX 100X, ultimateX 120X)<br />
** 16GB SDHC Class 4 (SD4/16GB)<br />
** 16GB microSDHC Class 10 (SDC10/16GB)<br />
** 16GB SDHC Class 10 (SD10G2/16GB, ultimateX 100X)<br />
** 16GB SDHC Class 10 (SD4/16GBET)<br />
** 32GB SDHC Class 10 (SD10V)<br />
** 32GB SDHC Class 10 (SD10G2/32GB, ultimateX 100X)<br />
* '''Kodak''' <br />
** 4GB SDHC Class 2<br />
** 8GB SDHC Class 4<br />
* '''Kruidvat''' <br />
** 8GB SDHC Class 4<br />
* '''Lexar''' <br />
** 4GB SDHC Class 4 (Boots consistently and no error messages in log after 1/2 hour use ) (works with Raspbmc)<br />
** 4GB SDHC Class 6 Platinum II (from [http://www.microcenter.com/single_product_results.phtml?product_id=0350735 Microcenter])<br />
** 8GB SDHC Class 4<br />
** 8GB SDHC Class 6 Premium Series<br />
** 8GB SDHC Class 6 Platinum II<br />
** 16GB SDHC Class 6 Platinum II<br />
** 32GB microSDHC HIGH-SPEED Class 10 (from [http://www.amazon.co.uk/Lexar-32GB-Micro-Speed-Reader/dp/B004BR2ZTM Amazon])<br />
** 128GB SDXC UHS-I Card LSD128CTBNA400 (from [http://www.amazon.com/gp/product/B007BZRXK2 Amazon])<br />
* '''Master'''<br />
** 16GB SDHC Class 10 [man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0]<br />
* '''Medion'''<br />
** 8GB Class 4 SDHC UK sourced (Aldi)<br />
* '''Microcenter Brand (sold in bins at checkout)'''<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0289508 8GB SDHC Class 4]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349728 8GB SDHC Class 10]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349729 16GB SDHC Class 10]<br />
* '''Mushkin'''<br />
** 16GB SDHC Class 10 (MKNSDHCU1-16GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226324]<br />
** 32GB SDHC Class 10 (MKNSDHCC10-32GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226235]<br />
* '''Mustang'''<br />
** [http://www.mustang-flash.de/Products/Flash%20Products/Secure%20Digital/SD-Card/8GB%20Mustang%20SDHC%20Card%20LeMans%2C%20Class%2010%2C%20Retail|SD8GHCCL10MU-R.html 8GB SDHC Class 10]<br />
* '''MyMemory''' <br />
** 8GB SDHC Class 10 (MYMESDH8G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-8GB-SD-Card-%28SDHC%29---Class-10 MyMemory 8GB class 10] (Latest batch not working)<br />
** 16GB SDHC Class 10 (MYMESDH16G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-16GB-SD-Card-(SDHC)---Class-10]<br />
* '''NovaTech'''<br />
** 8GB SDHC Class 10 (Integral Branded)<br />
* '''OCZ'''<br />
** 8GB SDHC Class 6 Gold Series (08110596-8GB-6) tested with Debian Squeeze (official Raspberry Pi distribution debian6-19-04-2012.zip)<br />
* '''Optima'''<br />
** 8GB SDHC Class 10 (Pro-Speed)<br />
** 8GB SDHC Class 4 - working from 2012-09-18<br />
* '''Panasonic''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 10 UHS-I (~11.2MB/s read, ~6.2MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 2 (~11.1MB/s read, ~9.7MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (~4.8MB/s read, ~4.4MB/s write, following [[RPi_Performance#SD_card]])<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PSF8GSDHC10-PC)<br />
** 8GB SDHC Class 10 LX Series (PSF8GSDHC10-PC1)<br />
** 16GB SDHC Class 10 (PSF16GMCSDHC10)<br />
** 16GB SDHC Class 10 LX Series (PSF16GSDHC10) (19.3MB/s read, 9.3MB/s write)<br />
** 16GB microSDHC Class 10 (PSF16GMSHC10) (requires recent kernel update for boot)<br />
** 32GB SDHC Class 10 (PSF32GSDHC10)<br />
** 32GB SDHC Class 10 UHS-1 (PEF32GSDHC10U1) (20.4MB/s read, 12.1MB/s write)<br />
* '''Peak''' <br />
** 4GB microSDHC Class 4 (MMBTR04GUBCA-ME) tested with Arch<br />
* '''Philips'''<br />
** 8GB SDHC Class 4 (FM08SD35B)<br />
* '''Platinum'''<br />
** 4GB SDHC Class 6<br />
** 8GB SDHC Class 6 (man:0x00006f oem:0x0000 name:SMI hwrev:0x1 fwrev:0x0)<br />
** 64GB SDCX Class 10<br />
* '''Play.com''' <br />
** 4GB SDHC Class 6 (S4E3CD04GEFAA 0907090121106)<br />
* '''PNY''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 4 Optima (SD-K04G 0834TT1297Y)<br />
** 4GB SDHC Class 4. Micro SD Card with adapter.<br />
** 8GB SDHC Class 6<br />
** 8GB SDHC Class 10. Micro SD card with adapter.<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 10 (P-SDHC16G10-GE)<br />
*** See the note for P-SDHC16G10-EF. Works with Wheezy, does not work with Squeeze, Arch, or Fedora Remix. <br />
** 16GB SDHC Class 10 (P-SDHC16G10-EF) <br />
*** Works with [http://www.raspberrypi.org/archives/1435 Debian Wheezy]<br />
*** Does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
*** Does not work with Arch Linux Arm (archlinuxarm-29-04-2012: no video is displayed, solid red power light, tiny green light)<br />
** 16GB SDHC Class 10 Pro-Elite (P-SDH16U1-30-GE). Works with raspbmc, haven't tested others.<br />
* '''pqi'''<br />
** 8GB SDHC Class 6 <br />
*** Works with official debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 (8DK52-122ME)<br />
* '''Samsung''' <br />
** 4GB SDHC<br />
** 8GB SDHC Class 6 (MB-SS8GAEU)<br />
** 8GB SDHC Class 10 (MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM)<br />
** 16GB SDHC Class 6 (MB-SSAGAEU)<br />
** 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy], but does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
* '''SanDisk''' <br />
** 2GB SD, white "SanDisk for Wii" branded, no class mentioned<br />
** 2GB SD (with a circle 2 --probably class 2), writes at 3.5 Mb/s<br />
** 2GB SD Class 2 (BE0816113150D)<br />
** 2GB SD Class 4 Ultra (15MB/s)<br />
** 2GB SD Class 4 Ultra II<br />
** 2GB SD Ultra II (BE0719111366D)<br />
** 2GB SD Extreme III (BE0715105083B)<br />
** 2GB SD Extreme III (BE0804212046D) - 20MB/s - Class 6<br />
** 4GB SDHC Class 2 (BH0820113475D) - Tested with RPITC (Based on Raspbian Wheezy)<br />
** 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 4GB SDHC Class 4 (SDSDB-004G-B35)<br />
** 4GB SDHC Class 4 (SDSDB-004G-BT35). Confirmed working with stock debian6-19-04-2012.img<br />
** 4GB SDHC Class 4 (BH1210821913G)<br />
** 4GB SDHC Class 4 (SDSDH2-004G-AC11, BH1127216239D) Costco 2-pack, booting Wheezy 2012-07-15<br />
** 4GB SDHC Class 4 Ultra (SDSDH-004G-U46) won`t reboot when it`s hot<br />
** 4GB SDHC Class 4 Ultra II<br />
** 4GB SDHC Class 6 Ultra (30MB/s BH1200421822D)<br />
** 4GB SDHC Class 6 Ultra (SDSDH-004G-U46 - BH1136121837G, BH1130521822D)<br />
** 4GB SDHC Class 10 Extreme (BH10297143382G)<br />
** 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 8GB SDHC Class 4 (writes at ~1.5MB/s)<br />
** 8GB SDHC Class 4 Ultra labelled as 15MB/s (BI1024716014G)<br />
** 8GB SDHC Class 6 Ultra <br />
** 8GB SDHC Class 6 micro - MMAGR08GUDCA-DB<br />
*** also SDSDH-008G-U46 - BI1131222083D see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
*** except SDSRH-008G-A11 could be problematic, see below<br />
** 8GB SDHC Class 6 Ultra labelled as 20MB/s (BI11321422083D)<br />
** 8GB SDHC-I Class 6 Ultra labelled as 30MB/s (SDSDH2-008G-AC11)<br />
*** requires updated Squeeze or Wheezy beta<br />
** 8GB SDHC Class 10 Extreme (BI11017514367G)<br />
** 8GB SDHC Class 10 Extreme (B11209116254G) - Managed to get it working with raspbian R3 [http://archive.raspbian.org/images/rpi_pisces_r3.zip rpi_pisces_r3.zip] however does not work with official squeeze nor Arch linux.<br />
** 8GB SDHC Class 10 Extreme (30MB/s HD Video) - working with new [https://github.com/raspberrypi/firmware/blob/9308c7ed387e5422883753f7fb71a75506abd1f8/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-10 for Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 images (BI1130916254G).<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-U46) - Works with stock debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (works with OpenELEC r11493)<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-UDQ46) - Works with stock 2012-09-18-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme (SDSDX-008G-X46/BI1218822414G) - Works with stock 2012-08-16-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-008G-X46) - Works with stock 2012-07-15-wheezy-raspbian<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 16GB SDGC Class 4 (SDSDB-016G-B35) - working with [https://github.com/raspberrypi/firmware/blob/234c19de7cbaaf4997671d61df20a05759066295/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-15 for Debian Squeeze 2012-04-19<br />
** 16GB SDHC Class 6 Ultra (30MB/s) (BL1133921933G) - Work with OpenELEC r11324<br />
** 16GB SDHC Class 10 Ultra(30MB/s) (SDSDU-016G-U46) - Work with stock debian6-19-04-2012 image. Gave Kernel Panic with stock debian6-19-04-2012 image. Worked fine with Wheezy image.<br />
** 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Works with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02)<br />
** 16GB SDHC Class 10 Extreme (45MB/s U1) (BL1203322025G) - Works with 2012-08-16-wheezy-raspbian.img (tested 2012-09-15). Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 16GB SDHC Class 10 Extreme (45MB/s) (SDSDXPA-016G-FPP) - Working with latest RaspBMC image (tested 12/09/2012) [http://www.amazon.co.uk/gp/product/B00422J0CG/ref=oh_details_o00_s00_i00 Amazon Link]<br />
** 16GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-016G-A75) - Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 32GB SDHC Class 4<br />
** 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 32GB SDHC Class 6<br />
** 32GB SDHC Class 10 Ultra (30MB/s) - Works with stock debian6-19-04-2012 image<br />
** 32GB SDHC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-032G-X46) - works with arch-04-29-image and latest firmware (booting problems without firmware update)<br />
** 64GB SDXC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-064G-X46) - works with 2012-07-15-wheezy-raspbian<br />
** microSDHC / microSDXC<br />
*** 4GB microSDHC Class 2<br />
*** 4GB microSDHC Class 4<br />
*** 8GB microSDHC Class 2<br />
*** 8GB microSDHC Class 4<br />
*** 8GB microSDHC Class 6 Mobile Ultra (SDSDQY-008G-U46A) working with the latest firmware, won`t reboot when it`s hot<br />
*** 8GB microSDHC Class 10 Ultra(30MB/s) (SDSDQU-008G-U46) tested and working on Raspbian wheezy (and RaspBMC)<br />
*** 16GB microSDHC Class 10 Mobile Ultra (SDSDQUA-016G-U46A) working with the latest firmware<br />
*** 32GB microSDHC Class 4 (SDSDQM-032G-B35)<br />
*** [http://img217.imageshack.us/img217/6435/dsc0255uc.jpg 64GB microSDXC Class 6 Mobile Ultra] (SDSDQY-064G-A11A) (boots up much more consistently with latest firmware)<br />
* '''Silicon Power''' <br />
** 4GB microSDHC Class 6 (SP004GBSTH006V10-SP)<br />
** 8GB microSDHC Class 10 (S608G1202)<br />
** 16GB microSDHC Class 10 (SP016GBSDH010V10)<br />
* '''Sony'''<br />
** 4GB SDHC Class 4 (SF-4B4) (Write 6MB/s, Read 20MB/s)<br />
** 4GB SDHC Class 4 (SF-4N4)<br />
** 8GB SDHC Class 4 (Write 11.8MB/s, Read 17.4MB/s)<br />
** [http://store.sony.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&partNumber=SF32NX/TQ#features 32GB SDHC Class 10 (SF-32NX/TQ)] (Max read speed of ~94MB/s, min write speed of ~10MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012) <br />
* '''Strontium'''<br />
** 8GB SDHC Class 10 (SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492))<br />
* '''Super Talent'''<br />
** 32GB Secure Digital High Capacity SDHC Card (Class 10), Model SDHC32-C10 SKU: 116-557-001 (works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian))<br />
* '''TakeMS'''<br />
** 4GB microSDHC Class 4 (with adapter) [http://www.takems.com/products.php?categ=flash&prod=Micro_SDHC-Card Micro SDHC Class 4 + 1 Adapter(Order No.88662)]<br />
* '''TDK'''<br />
** 4GB SDHC Class 4 (1008WW5261B)<br />
** 4GB SDHC Class 4 (80-56-10275-004G,Debian works '''BUT''' mmc0 errors when booting Fedora)<br />
** 4GB microSDHC Class 4 (80-56-10301-004G)<br />
** 4GB SDHC Class 6 (S404G1113) - Works with Debian Wheezy (2012-06-18 beta), not tried latest OpenELEC yet.<br />
** 8GB SDHC Class 10 - Works with Raspbian 2012-07-15<br />
** Sandisk 64GB Class 10 Ultra SDXC UHS-I FFP (3A114807)<br />
<br />
* '''Toshiba'''<br />
** 8GB mircoSDHC SD-C08GJ(BL3A<br />
** 16GB SDHC Class 10 SD-T16G (1046 US7022 C)<br />
* '''Transcend'''<br />
** 4GB SDHC Class 4 - we've found these to work without any errors and offer reasonable performance<br />
** 4GB SDHC Class 4 (TS4GSDHC4 - BH1130821915G)<br />
** 4GB SDHC Class 6 (TS4GSDHC6) - no problems. (does not work with Raspbmc as of 6/1/12)<br />
** 4GB SDHC Class 10 (TS4GSDHC10E)<br />
** [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-(SDHC)---Class-4 8GB SDHC Class 4] (TS8GSDHC4) (man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions.<br />
** 8GB SDHC Class 6 (~5.8 MB/s read/write following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (TS8GSDHC6-P2 - MMBFG08GWACA-M6)<br />
** 8GB SDHC Class 10 (TS8GSDHC10) [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-%28SDHC%29---Class-10- Transcend 8G class 10]<br />
** 16GB SDHC Class 6 (TS16GSDHC6)<br />
** 16GB SDHC Class 10 (TS16GSDHC10)(TS16GSDHC10E)<br />
** [http://www.transcend.com.es/tarjetas-de-memoria/sd-sdhc/32gb-sdhc-class-10 32GB SDHC Class 10] (TS32GSDHC10)(TS32GSDHC10E)<br />
** 64GB SDXC Class 10 (TS64GSDXC10)<br />
* '''Verbatim'''<br />
** 8GB SDHC Class 10 (43961)<br />
** 16GB SDHC Class 10 (43962)<br />
** 32GB SDHC Class 6 (44032)<br />
<br />
*'''Traveler'''<br />
**4GB High Speed Memory Card - no class mentioned. No problems. Tested with Raspbian.<br />
<br />
* '''The Pi Hut'''<br />
** Sandisk 4GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 8GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 16GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 32GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''V-Gen'''<br />
** 8GB microSDHC - no class mentioned. No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc. <br />
<br />
* '''Veho (http://www.veho-uk.com)'''<br />
** 8Gb "Ultra Fast" Class 6. (man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux.<br />
<br />
* '''W Photo (Walgreens photo)'''<br />
** 1GB SD memory card. Works with raspbmc, have not tested others.<br />
** 2GB SD memory card. Works with raspbian, not tested with others.<br />
<br />
Known good (and pre-loaded) cards will be available for sale from RS and element14 at a ''later'' date (TBA).<br />
<br />
===Problem SD Cards===<br />
<br />
Make sure that you buy your card from a reliable source. There are many cheap Chinese copies of (brand name) SD-Cards on the market, [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit/] in addition they are often mislabeled as having greater capacity than they really have. For example they might be sold as being 4GB, but are actually 2GB (or even less). <br />
<br />
There were initially issues with most Class 10 SDHC cards, apparently due to a bug in the Broadcom bootloader.[http://www.raspberrypi.org/forum/general-discussion/class-10-sd-cards-on-the-production-boards/page-3/#p39181]<br />
<br />
This seems to have been fixed in sdhci.c: [https://github.com/raspberrypi/linux/commit/7e8ae226fe6e95954df6b0dcdde40a53dbbc1a0b] Further feedback will be useful.<br />
<br />
If you add an SD card here, please also mention the kernel date and the date you tried it. This allows people to estimate how likely it is that a driver-fix in the kernel has been fixed. (i.e. I think some/most of the cards here work fine now, because a problem in the kernel driver has been fixed). <br />
<br />
* '''Acumem'''<br />
** 8GB SDHC Class 6 (many errors on 6/7/2012)<br />
* '''Adata'''<br />
** 2GB Speedy (MMAGF02GWMCA -NA)<br />
** 8GB SDHC Class 6 - Sometimes boots<br />
** 16GB SDHC Class 6 (Possibly SD5MY168G0, label with gold <> black gradient) - Doesn't boot<br />
* '''Agfa'''<br />
** 16GB MicroSDHC class 6 (as written on SD-Adapter, MicroSD card itself no-name? ENAAJK121960): mixed results, such a card was working on another RPi<br />
* '''Amazon Basics'''<br />
** 16GB SDHC Class 10 (many errors on 6/7/2012)<br />
* '''Delkin Devices'''<br />
** 4GB SDHC Class 6 "Delkin pro" -- Note: works with Fedora Beefy Miracle 17<br />
* '''GSkill'''<br />
** 32GB SDHC Class 10<br />
* '''Integral'''<br />
** 16GB SDHC Class 6 Ultima Pro (SH016GAA2BB)<br />
** 4GB SDHC class 4 (S404G1115)<br />
* '''Kingston''' <br />
** 2GB SD [http://www.geeks.com/details.asp?invtid=KING-SD-M02G-BULK looks like this] - boots the kernel, but damages the filesystem.<br />
** 4GB SDHC Class 6 - Boots kernel but won't run init (times out)<br />
** 8GB/Go SDHC Class 10 - SD10V/8GB Very slow writing images to card and then either won't boot, or boots very slowly<br />
** 16GB SDHC Class 4 (SDC4/16GB17) - Device does not recognize it <br />
* '''Memory2GO'''<br />
** 4GB SDHC Class 6 (S404G1029) - I/O Errors leading to Kernel Panic on startup.<br />
* '''Micro Center'''<br />
**4GB SDHC Class 4 — hasn't worked with any of the images I've tried; appears to be completely unrecognized<br />
* '''MyMemory.com''' <br />
** 8GB SDHC Class 10<br />
<br />
* '''Optima''' <br />
** <del>8GB SDHC Class 4 - Does not boot with Raspbian Wheezy 2012-07-15</del> - works with 2012-09-18 <br />
<br />
* '''Panasonic''' <br />
** 8GB SDHC Class 10 (RP-SDU08GD1K) mmc0: timeout waiting for hardware interrupt [http://www.mymemory.co.uk/SDHC/Panasonic/Panasonic-8GB-UHS-1-London-2012-Collection-SDHC-Card---Class-10 Panasonic 8GB Class 10]<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PS8GSDHC10-BC) - repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian<br />
** 8GB SDHC Class 10 (PSF8GSDHC10)<br />
** 8GB SDHC Class 10 (PSF8GSDHC10-PC) - won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc.). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore).<br />
* '''Platinum''' <br />
** 8GB SDHC Class 8 (O08G840 M3100487 TW)<br />
** 16GB SDHC Class 10 (article code 177117) - Does not boot with Raspbian Wheezy 2012-09-12<br />
* '''PNY'''<br />
** 8GB Optima SDHC 120 HD Class 4 SD-K08G 0928 WF3673 - mmc -110 errors at init time on 6/12/12<br />
** 8GB Premium SDHC Class 4 - mmc - mmc0: timeout waiting for hardware interrupt<br />
** 32GB SDHC Class 10 Professional (P-SDHC32G10-EF) from [http://www.play.com/Electronics/Electronics/4-/18814903/-/Product.html play.com] (mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)<br />
** 2GB card SD-M02G<br />
* '''Polaroid'''<br />
** 16GB SDHC C10 (P-SDHC16GB10-EFPOL) - mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 233x - mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic, ...<br />
* '''Reekin'''<br />
** 4Gb HighSpeed SH4GC6M16MIN9C0812TE (old) don't boot ! (11/07/2012)<br />
* '''Samsung'''<br />
** 4GB SDHC Class 4 (MB-SS4G MBSS4GMBDDBA-DD) doesn't boot with [http://downloads.raspberrypi.org/images/raspbian/2012-07-15-wheezy-raspbian/2012-07-15-wheezy-raspbian.zip 2012-07-15-wheezy-raspbian] - OK light partially lit.<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt), but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy]<br />
* '''SanDisk''' <br />
** 2GB SD Extreme III (BE0722702998D) (man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)<br />
** 2GB SD (BE0916214253D)<br />
** 2GB Ultra || 15MB/s (BE0828713280D)<br />
** 4GB SDHC Class 2 - Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt.<br />
** 4GB SDHC Class 2 "Limited Edition" (8H825413279G) - Error -110 whilst initialising sd card<br />
** 4GB SDHC Class 4 (BH1030216016G) - Doesn't boot.<br />
** 4GB SDHC Class 4 (BH1031116016G) - Doesn't boot.<br />
** 4GB SDHC Class 6 Extreme (BH0822411730D)<br />
** 4GB SDHC Class 6 Extreme III (30 MB/s) (BH0822712362G)<br />
** 4GB SDHC Class 10 Extreme (SDSDX-004G-X46) (30 MB/s HD Video) doesn't boot (also not with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta)<br />
** 4GB SDHC Class 10 Extreme (30 MB/s HD Video) (Doesn't boot) - Works with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot]<br />
** 4GB microSDHC Class 6 Mobile Ultra (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found<br />
** 8GB SDHC Class 6 Ultra (B11201421964G)<br />
** <del>8GB SDHC Class 6 Ultra (SDSDH-008G-U46 - BI1131222083D) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )</del> see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s (BI1208721965G)) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSRH-008G-A11 - Boots kernel but won't run init ( mmc timeout waiting for interrupt ) <br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSDH-008G-T11 - Boots kernel but won't run init ( debian6-19-04-2012: mmc timeout waiting for interrupt ) , but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy] on 6/22/12<br />
** 8GB SDHC Class 6 Ultra I (BI1201221964G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Extreme (BI1101116253G)<br />
** 8GB SDHC Class 10 Extreme (BI1108716254G)<br />
** 8GB SDHC Class 10 Extreme (BI1201416254G) - Still doesn't work with Debian Wheezy beta (2012-06-18)<br />
** <del>8GB SDHC Class 10 Extreme (BI1201516254G) [[http://www.amazon.co.uk/gp/product/B00422FBJ2 amazon.co.uk]]+amazon.fr</del> works with wheezy 19/09/2012<br />
** 8GB SDHC Class 10 Extreme (BI1200916252D/SDSDX-008G-X46) - Tried with Debian "Squeeze"(19/04/2012), Debian "Wheezy"(18/06/2012) and Arch Linux(13/06/2012). None works. With Debian "Wheezy" Green LED stays ON continuously, with the other two it turns on very faint.<br />
** 8GB SDHC Class 10 Extreme Pro- Works with updated kernel/firmware, stock debian6-19-04-2012 boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** <del>16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Doesn't boot with debian6-19-04-2012.img, or newer firmware (tested 2012-06-17).</del><br />
** 16GB SDHC Class 6 Ultra (BL1202021933G)<br />
** 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
* '''Silicon Power''' <br />
** 32GB SDHC Class 6 (LS2N732GQON03ASP) - boots debian6-19-04-2012.img, but frequent slow response / system hangs.<br />
<br />
* '''TDK'''<br />
** 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot] but still won't run init.<br />
** 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried (4th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github [https://github.com/raspberrypi/firmware/tree/87a04c0be0c05e20f94f223183a0310b37c9bd89/boot] but still got 'Error -84' and 'Kernel panic - not syncing: No init found'<br />
<br />
* '''Transcend'''<br />
** 2GB MicroSD (MMAGR02GUECA-MB) - reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots.<br />
** 32GB MicroSD (TS32GUSDHC4) - Doesn't boot.<br />
** 2GB SD (6451AG 2G O2DS1)<br />
** 16GB SD Class10 (TS16GSDHC10U1) - Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"<br />
* '''Veho'''<br />
** 4GB SDHC Class 6 <br />
* '''Verbatim'''<br />
** 16GB SDHC Class 6 (47178) - Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt<br />
** 8GB microSD Class 10 (44012) - ArchLinux - boots, but after system update develops segmentation faults<br />
<br />
The usual warnings against less reputable sellers (such as Ebay merchants) apply.<br />
<br />
<br />
Note that the following error is sometimes accompanied with a non-working SD card after booting (on Debian):<br />
<br />
mmc0: timeout waiting for hardware interrupt<br />
<br />
=== Benchmarks ===<br />
<br />
* http://www.sakoman.com/OMAP/microsd-card-perfomance-test-results.html<br />
* http://usbspeed.nirsoft.net/usb_drive_speed_summary.html?o=11<br />
* http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076<br />
* http://forum.xda-developers.com/showthread.php?t=1005633 (Doesn't originate from R-Pi, but very related)<br />
<br />
== Foreign Language Translations ==<br />
* [[Ru:RaspberryPiBoardVerifiedPeripherals]]<br />
<br />
== References ==<br />
<references><br />
</references><br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426https://elinux.org/index.php?title=RPi_VerifiedPeripherals&diff=180650RPi VerifiedPeripherals2012-10-14T01:41:18Z<p>Lob0426: /* Working USB Keyboards */</p>
<hr />
<div>[[Category: Linux]]<br />
[[Category: ARM Development Boards]]<br />
[[Category: Broadcom]]<br />
[[Category: Development Boards]]<br />
[[Category: RaspberryPi]]<br />
[[Category: Education]]<br />
{{Template: RPi_Hardware}}<br />
<br />
<br />
'''A note about this page: For USB devices, please specify if they required a powered hub'''<br />
==Notes==<br />
<br />
19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the [http://www.raspberrypi.org/downloads default Debian distribution] unless stated otherwise. A suggested suffix markup scheme is as follows:<br />
<br />
* (A) - Relates to model A production board<br />
* (B) - Relates to model B production board<br />
* (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different<br />
* No markup - relates to all production boards<br />
<br />
''Discuss: [http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247 http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247]''<br />
<br />
If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order.<br />
<br />
==Power Usage Notes==<br />
{{Warning|Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the RPi. If the RPi's supply voltage falls below a certain value (anecdotally stated as around 4.75V), or it begins to fluctuate, your setup may become unstable. There is a [http://elinux.org/RPi_Hardware#Power Wiki section about this issue] which is worth a read.}}<br />
<br />
'''Model B Hardware Revisions and USB Power limits'''<br />
'''Hardware Revision 1.0'''<br />
The original Model B board had current limiting polyfuses which limited the power output of each USB port to approximatly 100mA. USB devices using more than 100mA had to be connected via a powered hub. The PI's PSU was chosen with a power budget of 700mA of which 200mA were assigned to the USB ports, so the Raspberry Pi's (poly)fuses were designed only for devices up to 100mA, and typical 140mA polyfuses will have as much as 0.6 volt across them when drawing currents near the 100mA limit. As a consequence the USB ports are only directly suitable for "single current unit" USB devices which, according to USB specifications, are designed to work with just 4.4 Volt. Not only do non single current unit devices draw more current (causing greater Voltage drops, and greater stress on the fuses), they also might require 4.75 Volt to work.<br />
<br />
'''Model B Hardware Revision 2.0 and Revision 1.0 with ECN0001 change'''<br />
This had the polyfuses removed, removing the 100mA current limitation for each USB port (but leaving the main fuse F3 intact). Users should still ensure their power supply can power the RPi and the USB peripherals. Revision 2.0 was released in August 2012.<br />
<br />
==Linux Driver Issues==<br />
Shortly after the Raspberry Pi was released it was it was confirmed that there were a number of issues with the Linux USB driver for the SMSC95xx chip. These included problems with USB 1.x peripherals that use split transactions, a fixed number of channels (causing problems with Kinect) and the way the ARM processor handles the SMSC95xx interrupts. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097&start=76] [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=5249&start=44]<br />
A large number of fixes were included in the 2012-08-19-wheezy-raspbian Linux image.<br />
<br />
== Powered USB Hubs ==<br />
A number of low-cost powered USB hubs are known to have caused problems. Members of the Raspberry Pi forums have reported low power or no power at all in some cases. The following is a list of specific Powered USB Hubs which appear to be fault-free. Please note that these do not take into account powering the Raspberry Pi from the hub, in addition to its peripherals.<br />
<br />
If you use a powered hub and PI PSU together consider powering them from the same power bar with switch, so you can turn them on simultaneously., especially if the HUB tries to feed the PI through their interconnect cable, due to the 100mA limiting fuse in the PI the PI will be partially powered which may cause problems (unwanted writes to the SD card).<br />
<br />
===Working USB Hubs===<br />
*'''Acme'''<br />
** USB 2.0 hub 4 port ([http://www.acme.eu/en-us/product/019188 ACME]) Based on NEC μPD720114 USB2.0 Hub Controller USB ID 0409:005a '''NOTE!''' It is bus-powered hub, but very cheap and small and works after a small modding: on usb-hub board you have 4 holes: V, D+, D- and GND. Connect GND, D+ and D- to the RasPI, and additionally connect GND and +5v from power supply to the same holes on usb-hub GND and V. Now there is common contacts: GND, D+ and D- between RasPI and hub needed to work, and additional power for USB devices, connected to the hub. Tested on my RasPI.<br />
*'''Belkin'''<br />
** F4U040 4-Port Ultra-Slim Desktop hub (powered 5v, 2.6A, lsusb lists as Genesys Logic 05e3:0608)<br />
** F5U224 4 port powered USB hub<br />
** F5U231/F5U234 Hi-speed USB 2.0 Tertrahub - 4 port powered USB hub (verified.. able to power Raspberry Pi using micro USB directly from hub)<br />
** F5U237 7 Port powered USB 2.0 5V 3.8A (5 back port 2 top ports)<br />
** F5U259-ME USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time)<br />
** F5U403 USB 2.-0 4 Port Hub (Powered, suspect see F5U404 in non-working, didn't test power the RPi from hub.)<br />
** F5U700 USB 2.0 7-Port Hub (Powered, able to power Raspberry Pi via micro USB directly from hub)<br />
** F5U706ea/uk 2-in-1 Hub (USB 2.0, powered, 7-port)<br />
** F5U706701PerBlk 7-in-1 Hub (USB 2.0, powered 5V 2.5A , 7-port)<br />
** F4U039qukAPL 7 port Ultra-Slim Desktop Hub (internally two Genesys Logic 05e3:0608 devices - powering RPi from port furthest away from power supply. Toshiba Stor.E 1TB must be powered from ports closest to the power supply to avoid errors in dmesg. Flash drives seem fine on ports away from the power supply.)<br />
*'''Benq'''<br />
** E2220HD LCD Monitor with 4 port USB Hub. Able to power the Pi and no backfeed of power from the monitor to the Pi via the interconnect. Just works.<br />
*'''Biltema'''<br />
** 23-924 4-port powered USB 2.0 Hub (2.0A) Able to power Raspberry Pi via USB port<br />
*'''CyberPower'''<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817804002] CP-H720P 7-port powered hub with 3.6A adapter. Internally, a NEC Corp 0409:0050 device. Works perfectly with Model B, regardless of whether the RPi is being powered by the hub or externally.<br />
*'''Dell'''<br />
** Dell 2001FP monitor has 4 USB ports and acts as a powered hub.<br />
** Dell SP2309W monitor has 4 USB ports and acts as a powered hub.<br />
** Dell 2407FWP monitor has 4 USB ports and acts as a powered hub. Additionally, the 6-in-1 Card Reader part of the monitor works as well, though it will not read SDXC Cards.<br />
** Dell U3011 monitor has 4 USB ports and acts as a powered hub. Additionally, the Card Reader part of the monitor works as well, and is compatible with 128GB SDXC Lexar Brand Cards <br />
*'''DELTACO'''<br />
** [https://www.deltaco.se/products/items/itemid/(UH-715)/index.aspx UH-715 Rev 2] 7-port powered hub with 2A adapter.<br />
*'''DYNEX'''<br />
** 7port hob idVendor=0409, idProduct=0050 works<br />
*'''D-Link'''<br />
** [http://www.amazon.com/D-Link-DUB-H7-High-Speed-7-Port/dp/B00008VFAF] 7-Port USB Hub DUB-H7 (See note below - doesn't work for all, apparently). Working model marked BUBH7A....A5. Worked with Debian on production B model, for keyboard, mouse, and thumb drives, also worked with ArchLinux, didn't work with Bodhi Linux immediately thereafter. Recent model did not work with default raspbian firmware (3.1.9+ #272); updated firmware with rpi-update (to 3.2.27+ #66), now seems to work perfectly.<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817111131] 4-Port USB Hub DUB-H4 Worked on Debian with keyboard, mouse, and thumb drive. Also tested with Raspbmc and external HD (powered through USB). While the hub has a charging port, which should be able to provide power enough to the RasPi (1.2 A), connecting the RasPi here doesn't work, as it seems the power is cut during boot (At least with hub hardware rev. C1). While it does boot from any of the other ports, it shouldn't be used it doesn't provide enough power (Standard 500 mA per port. Measuring at P1-P2 on the RasPi: ~4.45 V).<br />
*'''Digicom'''<br />
** [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MiniHubUsb204P#] MiniHUB 4-Port USB 2.0 with PSU 5V - 2A .<br />
*'''Digitus'''<br />
** 7-port USB2.0 Powered Hub. Model DA-70226.<br />
*'''Eminent'''<br />
** [http://www.eminent-online.com/en/product/22/em1102-4-port-usb-hub---black.html] EM1102 4 Port USB 2.0 Hub with 1A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
** [http://www.eminent-online.com/en/product/27/7-port-usb-2-0-hub.html] EM1107 7 Port USB 2.0 Hub with 2A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
* '''GearHead'''<br />
** [http://www.amazon.com/gp/product/B004OBZ088/] GearHead 4 Port Hub with Energy Saving Power Switch (5V, 1A)<br />
*'''Gembird'''<br />
** Gembird UHS 242 4-port USB 2.0 Hub 1.8 Amps<br />
* '''Genesys Logic (sold at Fry's)'''<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0608) (Other brands include Gigaware and Belkin, same ID shows up in lsusb)<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0606) (Other brands include i-Rocks, same ID shows up in lsusb)<br />
* '''Hama'''<br />
** Hama 4-way USB 2.0 Hub<br />
*'''HP'''<br />
** HP ZR2240w 21.5" Monitor with built in 2-Port USB Hub (B)<br />
*'''Laser'''<br />
** "7 port USB hub with AC adapter Version 2.0". 5V 1A (found at Harvey Norman Australia for $24.95 and Australia Post Shops for $9.95). You can power the PI by connecting both the main USB connector to the PI USB port, '''and''' from a spare USB port back to the power micro USB socket. If you don't do both, boot-loops are likely to occur.<br />
*'''Logik'''<br />
** [http://www.currys.co.uk/gbuk/logik-lp4hub10-4-port-powered-usb-hub-04979038-pdt.html] LP4HUB10 4-Port USB Hub. '''Throws errors when used with Fedora remix 14'''<br />
** Logik L4THUB10 4 Port powered hub works fine under raspbian/wheezy/model B. Captive usb cable, 2A power supply, convenient single top mounted usb socket. Unlike my last hub, will power wifi!<br />
*'''LogiLink'''<br />
** UA0085 USB 2.0 Hub, 4-Port with PSU 5V, 2A<br />
** UA0091 USB 3.0 Hub, 4-Port with PSU 5V, 4A. Connected with USB2.0 cable. 1A per port, able to support USB HDD drives and other power hungry devices. Tested with kernel 3.1.9-cutdown, Wheezy. <br />
** UA0096 USB 2.0 Hub, 10-Port with PSU 5V, 3.5A (Not suitable for powering RPi because it doesn't work unless there is working USB input present even with PSU plugged in.)<br />
** UA0160 USB 2.0 Hub, 4-Port with PSU 5V, 2A. Able to power the RPi, keyboard, mouse and LogiLink UA0144 USB ethernet adapter. (More testing to come.)<br />
* '''Manhattan'''<br />
** [http://manhattan-products.com/en-US/products/6500-hi-speed-usb-2-0-micro-hub] (#160612) Hi-Speed USB 2.0 Micro HUB, AC Powered (identifies as ID 05e3:0608 Genesys Logic) Includes a 1000mA wall-wart (US style)<br />
*'''Newlink'''<br />
** NLUSB2-224P 4 port USB 2.0 Mini hub with PSU 5V 1A<br />
*'''Nilox'''<br />
** Nilox USB 2.0 4port HUB model HUB4USB2AC with PSU 5V 1.0A <br />
* '''Plugable'''<br />
** [http://plugable.com/products/USB2-HUB4BC/] USB2-HUB4BC 4 Port USB 2.0 Hub with BC 1.1 Fast Charging. 5V 2.5A power supply. Powering Pi via microUSB from a hub port. USB Audio peripheral tested and working.<br />
* '''Pluscom'''<br />
** Pluscom 7 Port USB 2.0 Hub Model U7PH-3A with 3Amp PSU. USB ID 1a40:0101. Powering Pi via microUSB from a hub port. Internally two 4 Port switches linked. Leaks power back up USB data cable to Pi but not really a problem when powering Pi at the same time.<br />
*'''Staples (Business Depot) (Bureau EN GROS)'''<br />
** Staples 4-port hub Item 607477-CA<br />
*'''StarTech.com'''<br />
** StarTech.com 7-port Compact USB 2.0 Hub (ST7202USB). Comes with 5v 2A supply. Shows in lsusb as two Genesys Logic, Inc. USB-2.0 4-Port HUBs (05e3:0608). Back powers Pi (Just, Voltage across TP1 & TP2 is a little low when powered from this hub).<br />
*'''SumVision'''<br />
** Sumvision Slim 4 Port High Speed USB 2.0 HUB with PSU 5V 1.0A (from [http://www.7dayshop.com/catalog/account_history_info.php?page=1&order_id=5130107 | 7dayshop ])<br />
*'''Sitecom'''<br />
** CN-032 4 Port USB 2.0 Pocket Hub. Works for powering the Pi, an USB WLAN Adapter, wireless Kbd+Mouse. Using an 2500 mA Voltcraft <br />
** CN-060 4 Port USB 2.0 Hub powered with AC Adapter (1A). Powering Pi via microUSB from a hub port.<br />
*'''Sweex'''<br />
** US014 4 Port USB 2.0 Hub<br />
*'''Targus'''<br />
** ACH81xx 7-port powered hub. 5V 3A power supply, with 2 high power ports. (possible conflicting behaviour with USB keyboard / Wifi Dongles)<br />
** ACH63EU 4-port. Using a 5V 2A power supply, which isn't supplied with the hub, it is able to power the PI as well.<br />
*'''The Pi Hut'''<br />
** 7 Port USB Hub (from [http://thepihut.com/products/7-port-usb-hub-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
*'''Trendnet'''<br />
** [http://www.trendnet.com/products/proddetail.asp?prod=130_TU2-700&cat=49] TU2-700 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2A)<br />
*'''Tripp-Lite'''<br />
** [http://www.tripplite.com/en/products/model.cfm?txtModelID=3167] U222-007-R 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2.5A) Powering RPi from Hub works<br />
*'''Ultron'''<br />
** [http://www.ultron.de/v1/produktansicht.php?artnr=67072&kid=bfa8340c4e245...&l=en&WGType=Neue+USB-HUBS] UHN-710 7-port powered hub with PSU 5V, 3A. USB ID 1a40:0201.<br />
*'''VANTEC'''<br />
** 4 Port USB 2.0 Powered Hub Model: UGT-MH304. 5V 2A AC/DC adapter. Go 2.0 Mini hub.<br />
*'''Z-TEK'''<br />
** Z-TEK 7-port powered hub with PSU 5V, 4A. USB ID 1a40:0201.<br />
*"Unknown"<br />
** 10(7-4) port hub idVendor=1a40, idProduct=0201 / idVendor=1a40, idProduct=0101 works<br />
<br />
===Problem USB Hubs===<br />
<br />
Please check known workarounds [http://elinux.org/Rpi_USB_check-list here] before adding to the list<br />
<br />
*'''Addon'''<br />
** 7-Port Powered Hub - labelled ADDUH070P - Gives constant Eth0 errors on boot.<br />
*'''Belkin'''<br />
** 7-Port Powered Mobile Hub - device labelled F4U018, packaging labelled F5U701. lsusb reveals it to be two Genesys Logic 4-port hubs based on the GL850G chipset (vendor: 0x05e3 product: 0x0608) ganged together. Yields a lot of "handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" errors and device resets in /var/log/messages. Low speed devices such as keyboards work OK, wifi/mass storage is unreliable or broken. -- No error messages with the latest kernel, but still unstable with mass storage devices. Also, leaks current back to the Pi (can be fixed by overtaping GND and +5V pinouts)<br />
** F4U022 7-Port powered USB hub (powered 5v, 2.6A), same as F4U018<br />
** 7-Port Powered Hub - device labled F5U237 Rev.3 - ID 050d:0237 Wired ethernet fails to connect; gives "DWC OTG HCD URB enqueue failed adding QTD. Error status -4008" Result is same as DUB-H7 below.<br />
** F5U404 Hi-Speed USB 2.0 4-Port Mobile Hub. Faulty/bad design; Leaks current back up the cable to the Raspberry Pi.<br />
** F5U307 Hi-Speed USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time) It work's sometimes. (Works always without powering the RPi, haven't tried that)<br />
<br />
*'''Dell'''<br />
** Dell U2410 Monitor Built-in 4 Port Hub - Shows up as a pair with 0424:2514 and 0424:2640. Standard Microsystems Corp. USB 2.0 Hub. When connecting some devices it kills the Ethernet with "smsc95xx 1-1.1:1.0: eth0: Failed to read register index 0x0000011X" errors. It did work for a keyboard and webcam. Bluetooth that works connected directly to the Pi triggers the error.<br />
<br />
*'''DELTACO'''<br />
** 7-Port USB Hub UH-713 Rev 3. This one consists also of two 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUBs connected together. The power supply is rated at 5 V 2 A. It kills ethernet when X11 is started.<br />
<br />
*'''Dynex'''<br />
** 7-Port USB Hub - Does not work in Debian 19-04 image.<br />
** DX-HB7PT 7-Port USB Hub - As per the Gear Head below, it's 2 daisy-chained Genesys Logic 05e3:0608 devices. Appears to result in significant slow downs when the USB is under load, such as running the root filesystem from a USB drive.<br />
<br />
*'''Dynamode'''<br />
** 7-Port USB 2.0 Hub (Silver and black). Feeds power back up the interconnect to the Pi causing the power LED to light on the Pi if the hub is powered on but the Pi is not. The Pi also fails to boot when powered off this hub, with or without the interconnect plugged in. Stops the network from working when connected to the Pi after booting the Pi - cannot ssh to the Pi. Best avoided. :-( Shows up in ''lsusb'' as a pair of ''ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB'' which is interesting. - Confirmed. This hub also appears unable to power an external USB drive using a y-cable as it gives the error -71 message in dmesg (when providing external power to the RPi)<br />
** 4-Port High-Speed USB 2.0 Hub (USB-H40-A2.0), came with with a 1A power supply. Leaks power to the Pi through the uplink. Doesn't work with Pi, unless the Pi is powered by a second power source. This hub is completely generic and I've seen it being sold under different brand names as well. Therefore, a picture is [http://i.imgur.com/BPZ3j.jpg included] for easy identification. <br />
<br />
*'''D-Link'''<br />
** 7-Port USB Hub DUB-H7 (Crashes USB stack, including Ethernet, when plugging / using some peripherals). (See note above, it works with some distros and/or with latest firmware)<br />
<br />
*'''E-Solution'''<br />
** 4-Port 2A Supply (Does not detect at all during boot or after boot- no messages) [IC = Alcor Micro Corp (AU6254)]<br />
<br />
*'''Fosmon'''<br />
** 7-Port USB 2.0 Hub w/ 1A Power Supply (Causes interference with other USB devices and sends enough power to light up the pi with it's Micro USB cable unplugged).<br />
<br />
*'''Gear Head'''<br />
** UH7250MAC 7-port powered hub. Internally, two daisy-chained Genesys Logic 05e3:0608 devices. Causes Ethernet instability when used under very specific circumstances, in X11.<br />
** <strike>UH5200T 4-port powered hub. As of 2012-08-16 Wheezy, if any USB 1.x device (a keyboard, for example) is plugged into this hub, Ethernet stops, and USB interrupts for other devices get dropped (keys repeating forever), etc. Occurs even if power is not attached (not a power leakage problem).</strike> Appears working after a bootloader and/or firmware update on 9/12. Also, turned out to be somewhat more specific to the combination of two particular low-speed devices.<br />
<br />
*'''Hama'''<br />
** 4-Port USB 2.0 "bus hub", model 78496 (?). Only works for low power devices (card readers?), but does not work for power hungry devices (HDD,WLAN). Doesnt boot when hub connected to RPi. The funniest thing is that RPi powers on when I plug in this hub to normal size USB port (not that small dedicated port). idVendor=05e3, idProduct=0608<br />
<br />
*'''Kensington'''<br />
** 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning keyboard, kills mouse when GUI started).<br />
<br />
*'''Inland'''<br />
** 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't, cheap unshielded untwisted wire design)<br />
<br />
*'''Logik'''<br />
** LP7HUB11 7-Port USB Hub. (Ethernet failed, slow response, in LXDE. Happened whether or not the hub's independent power supply was connected to the hub.)<br />
<br />
*'''Soniq'''<br />
** 4-Port 5V supply. Model number CUH100. (B). Appears to draw power away from the Raspberry Pi, even when the Pi has an isolated power line. Netgear WNA1100 WiFi Adapter (which is known to work in other setups is recognized, but unresponsive.<br />
<br />
*'''Targus'''<br />
** ACH115EU 7-port powered hub. 5V 3A power supply. Arduino communicates with RPi when connected directly to Pi's USB port, but it hangs soon if connected via ACH115. Also sometimes smsc95xx eth0 Failed to read register index 0x00000114 etc. errors in syslog when used.<br />
<br />
*'''TCM'''<br />
** Model 234298 s/n T634007737 powered hub. 4 ports plus card reader. 1A power supply. Model B, Wheezy raspian works ok with keyboard/mouse but problems with WiFi no connects. (insufficient power?)<br />
<br />
*'''Trust'''<br />
** 10-port USB 2.0 Hub (powered). Prevents ethernet from being recognised.<br />
** SliZe 7 port USB 2.0 Hub (powered) - Item number 17080 (Barcode 8 713439 170801). Prevents ethernet from being recognised. Keyboard sends multiple characters. <br />
<br />
*'''Unbranded / Multiple Brands'''<br />
** 7-port silver/black hub. Also sold elsewhere under brands such as 'EX-Pro', 'Trixes' and 'Xentra' -- This is ''probably'' due to an inadequate power supply. -- I replaced the terrible power supply with a very good one, kept getting "DEBUG: handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" in dmesg, with no devices plugged in to the hub (with or without the power supply in)<br />
** Generic 7-port black hub with Genesys Logic GL850A chipset<br />
** Cerulian 10 Port USB 2.0 Top Loading Hub with 2A supply (kills mouse and network port)<ref>http://www.raspberrypi.org/forum/absolute-beginners/cheap-powered-usb-hub-uk/#p76452</ref><br />
** [http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10307&cs_id=1030701&p_id=226 USB 2.0 4 PORT INT/EXT DUAL HUB BAY] -- Genesys Chipset -- idVendor=05e3, idProduct=0607 -- low speed devices worked, but strange USB failures when X session started. High speed devices such as hard drives had failures.<br />
<br />
== USB Remotes ==<br />
* ATI Remote Wonder (X10 Wireless Technology, Inc. X10 Receiver) — ID 0bc7:0004 — appears as a joystick-like 2 button mouse and a 0-9 keypad without drivers on console and X.<br />
<br />
* [http://www.amazon.com/gp/product/B005DKZTMG/ref=oh_details_o02_s00_i00 Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad (920-003070)] - keyboard and touchpad work. Have not verified multi-touch features.<br />
<br />
* [http://www.ipazzport.com/02A.html iPazzport] mini 2.4 GHz wireless keyboard and touchpad. <br />
<br />
* [http://www.ortek.com/html/pdt_view.asp?area=46&cat=152&sn=76 PKB 1800] Wireless Smart Pad ad Mini Keyboard. Pad works as mouse but not multi touch features. Keyboard works.<br />
<br />
* [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] '''Rii''' Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]. Working perfectly, just plug & play.<br />
<br />
* [https://www.google.com/search?q=tranksung+TS-Y150 Tranksung TS-Y150] USB RF Keyboard and air mouse (B)<br />
<br />
* [http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6753651&CatId=3680# Exo Ultra U12-41310 Mini Keyboard] Bluetooth Adapter, Touchpad, Laser Pointer, Presentation & Multimedia Controls work perfectly but need a little love and config for make it work.[https://github.com/thunderbirdtr/rs-pi-exo-keyboard Exo Installer script]<br />
<br />
== USB Keyboards ==<br />
USB keyboards that present themselves as a standard HID (Human Interface Device) device should work. '''Please be aware that some of these keyboards were probably used with a powered hub'''<br />
=== Working USB Keyboards ===<br />
The following is a list of specific keyboards known to work and which appear to work fault-free.<br />
<br />
* '''A4 Tech'''<br />
** Model KL-5 USB Keyboard, 20mA.<br />
<br />
* '''ABS'''<br />
** M1 Heavy Duty Professional Gaming Mechanical Keyboard (B)<br />
<br />
* '''Action Star'''<br />
** ACK-5010U Mini Keyboard And Mouse<br />
<br />
* '''Accuratus'''<br />
** KYB-Toughball-HI<br />
<br />
* '''Acer'''<br />
** KG-0917 Wireless Keyboard And Mouse Bundle (B)<br />
** KU-0906 Compact Keyboard (B) (Also known as Genius LuxeMate i200 Keyboard)<br />
** SK-9625 Multimedia Keyboard (B) (multimedia functions not tested)<br />
<br />
* '''Adesso'''<br />
** [http://ergoprise.com/product_images/j/699/ADP-PU21_big__14173_zoom.jpg PS/2 to USB Adapter] ADP-PU21, 100mA (tested only with keyboards) Any PS/2 keyboard will work only if it will work with a reduced operating voltage.<br />
** Model AKB-410UB. Keyboard with Touchpad.<br />
<br />
* '''Apple''' (Apple keyboards that have USB ports require an external powered hub to work, and do not work on the PI directly!)<br />
** [http://upload.wikimedia.org/wikipedia/commons/thumb/e/ea/Apple_iMac_Keyboard_A1243.png/800px-Apple_iMac_Keyboard_A1243.png Apple Keyboard with Numeric Keypad (aluminium/wired) A1243]<br />
** [http://upload.wikimedia.org/wikipedia/commons/8/81/Apple_Keyboard_A1242.jpg Apple Keyboard (aluminium/wired) A1242]<br />
<br />
* '''Asda'''<br />
** Basic Wired Keyboard HK2026 (B)<br />
** Basic Wired Keyboard HK3014<br />
*** (Please note when I put this keyboard through Newlink USB hub, it didn't work as expected)<br />
** Premium Wireless Keyboard (white keys, silver back) HK8028<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''Asus'''<br />
** KS-631U (comes with Asus Vento KM-63 keyboard/mouse set, not using powered hub) (B)<br />
<br />
* '''BTC - Behavior Tech Computer Corp.'''<br />
** Wired Portable Keyboard Model 6100 US (86+9 keys)<br />
*** Works with or without a powered hub<br />
** Wireless Multimedia Keyboard with build in pointer/mouse Model 9029URF III (86+17 keys) (B)<br />
** [http://www.btc.com.tw/english/2-7-07keyboard.htm Wired Multimedia keyboard 6311U/6310U] - rated at 5V/100mA, works directly<br />
<br />
* '''Bush'''<br />
** Wired Slimline Keyboard KU-0833<br />
*** This does not require a USB hub in order to work with the Raspberry Pi<br />
*** In the UK, it is available from Argos for £9.99<br />
<br />
* '''Cerulian''' <br />
** Mini wireless keyboard and mouse deskset (B)<br />
<br />
* '''CD Training''' <br />
** [http://www.cd-training.fr/?&feed=product&product_id=308 Wireless Combo Keyboard and Mouse (SolClavGlos)]<br />
<br />
* '''Cherry'''<br />
** CyMotion Master Linux (B)<br />
** RS 6000 USB ON<br />
** G84-4100PTMUS (B) (Compact keyboard. Rated 100mA. Works directly in Pi)<br />
<br />
* '''Compaq'''<br />
** Compaq Internet Keyboard KU-9978 (049f:000e). Rated 5v 100mA. Works directly connected to Pi<br />
<br />
* '''Das Keyboard'''<br />
** Model S Professional Keyboard (Built in USB hub not tested) (B)<br />
** Model S Ultimate Keyboard (Built in USB hub working) (B)<br />
<br />
* '''Dell'''<br />
** SK-8115 (B) (Rated 100mA. Works directly in pi)<br />
** L100 (B)<br />
** RT7D50 (75mA) (run "sudo dpkg-reconfigure keyboard-configuration")<br />
** KB1421 (100mA)<br />
** KB2521 (100mA)<br />
** 1HF2Y (Works directly in pi)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Delux'''<br />
** K8050<br />
<br />
* '''Digicom'''<br />
** WKEYPE01 Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
* '''Dynex'''<br />
** DX_-WKBD (60ma) (B)<br />
** DX_-WKBDSL (Hot keys not yet tested with Debian) (tested through non-powered 3 dongle usb hub) (B)<br />
<br />
* '''EAPPLY'''<br />
** EBO-013 Wireless 2.4GHz compact keyboard with touchpad. Rated <40mA works directly from Pi. eBay ref 260962010276 from Shenzen, China.<br />
<br />
* '''Emprex'''<br />
** Wireless Media Control Keyboard With Trackball 9039ARF III (Media functions untested)<br />
<br />
* '''Fujitsu Siemens''' <br />
** KB SC USB UK (!)<br />
** KB910 USB, with led light on the highest level (B)<br />
** KB400 USB US<br />
<br />
* '''GE''' <br />
** 98139 Rev.K1 (Power Keyboard) (lsusb shows it as "0b38:0010 Gear Head 107-Key Keyboard") - works without a hub (i.e. directly connected) (B)<br />
<br />
* '''Gear Head''' <br />
** KB3700TP (USB Mini Smart Touch Touchpad Keyboard) (B)<br />
** KB3800TP (Wireless Touch Mini Touchpad Keyboard with Smart Touch) (B)<br />
*** Works when plugged directly into Raspberry Pi, did not work with powered hub (could be a hub issue)<br />
** KB3800TPW (Windows Smart Touch Wireless Keyboard with Touchpad) (B)RASPBMC supported<br />
** KB4950TPW (Wireless Touch II Touchpad Keyboard) (B)<br />
** KB1500U (USB Mini Keyboard) (B)<br />
** KB5150 (2.4Ghz wireless keyboard/mouse Combo) (B)<br />
*** Works well with a powered hub<br />
<br />
* '''Genius'''<br />
** Ergomedia 700 (GK-04008/C) used without Hub<br />
** KB-06XE (K639) (B)<br />
** Slimstar 8000 wireless keyboard<br />
<br />
* '''HP'''<br />
** KG-1061<br />
** KG-0851 Wireless Keyboard and Mouse<br />
** KU-0316 (B)<br />
** LV290AA#ABA Wireless Keyboard and Mouse<br />
** PR1101U (available from Sainsbury's in the UK, £8, July 2012)<br />
** SK-2880<br />
<br />
* '''Hyundai'''<br />
** HY-K201<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Imation''' <br />
** KBD-702 Multi-media Wired Keyboard<br />
*** (works after the firmware update via [https://github.com/Hexxeh/rpi-update rpi-update] as of 06/27/2012)<br />
<br />
* '''IOGEAR'''<br />
** IOGEAR GKM561R Wireless HTPC Multimedia Keyboard with Trackball<br />
** IOGEAR GKM681R 2.4GHz Wireless Compact Keyboard with Optical Trackball and Scroll Wheel<br />
<br />
* '''iPazzPort'''<br />
<br />
* '''i.t.works'''<br />
** KC04 (direct and by usb hub)<br />
** KC Silicone (only tested directly)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''KeySonic'''<br />
** ACK-540RF (Wireless USB keyboard with built-in trackpad); works fine on Debian Squeeze plugged directly into Pi. Also works with Raspbmc with powered hub.<br />
** ACK-540RF+ (UK) WiFi keyboard inc touchpad with USB wifi dongle works fb with on model B/raspian/wheezy via powered hub<br />
** ACK-3700C<br />
** ACK-340U+(DE)<br />
** ACK-3400U (UK) mini keyboard<br />
<br />
* '''Labtec'''<br />
** [http://www.labtec.com/index.cfm/gear/details/EUR/EN,crid=28,contentid=692| Ultra-flat Keyboard]<br />
<br />
* '''Laptopmate'''<br />
** AK-98UNTN7-UBRII Laptopmate RII Touch N7 Mini Wireless Keyboard with touchpad<br />
<br />
* '''LC-Power<br />
** K1000BMW (lsusb: ID 1241:f767 Belkin; dmesg: HOLTEK Wireless 2.4GHz Trackball Keyboard) tested with Debian 6.0.4<br />
<br />
* '''Lenovo'''<br />
** SK-8825 UK (B)<br />
** Lenovo Enhanced Multimedia Remote with backlit keyboard N5902 (US)<br />
** Lenovo Mini Wireless Keyboard N5901 (US)<br />
<br />
* '''Lindy'''<br />
** 21840 (Wireless RF 2.4GHz Micro Keyboard with built-in optical touchpad/trackpad, USB); works fine on model B/raspian/wheezy - the supplied Lindy USB nano dongle transceiver plugged directly into Pi USB port.<br />
<br />
* '''Logik'''<br />
** Ultra slim keyboard LKBWSL11 (B) >> '''This is also listed under Problem USB Keyboards?'''<br />
<br />
* '''Logitech'''<br />
** Comfort Wave 450, labeled 100mA (M/N Y-U0001, P/N 820-001725, PID SC951C40001)<br />
** diNovo Mini wireless keyboard with media controls and clickpad 920-000586 (B)<br />
** diNovo Edge Keyboard, Windows edition, built-in TouchDisc track-pad, bluetooth w/ USB mini-receiver 967685-0403 (B)<br />
** Wii wireless keyboard KG-0802 (!)<br />
** C-BG17-Dual Wireless keyboard and mouse with wired USB receiver (B)<br />
** Deluxe 250 Keyboard<br />
** Internet 350 (M/N 967740-0403)<br />
** Internet Navigator Keyboard<br />
** MK120 wired keyboard and mouse<br />
** MK220 wireless keyboard and mouse<br />
** MK250 wireless keyboard and mouse (no hub needed)<br />
** MK260 wireless keyboard and mouse<br />
** MK300 wireless keyboard and mouse<br />
** MK320 wireless keyboard and mouse [http://www.amazon.co.uk/Logitech-920-002885-MK320-Wireless-Desktop/dp/B003STDQYW/ref=sr_1_3?ie=UTF8&qid=1339166178&sr=8-3]<br />
** MK350 wireless keyboard (using Unifying receiver)<br />
** MK520 wireless keyboard and mouse<br />
** MK550 wireless keyboard and mouse (B)<br />
** MX5000 Bluetooth keyboard and mouse (B) The Logitech Bluetooth dongle also does proprietary wireless so it works without Bluetooth drivers.<br />
** EX100 Cordless Desktop, Wireless Keyboard and Mouse (B)<br />
** EX110 Cordless Desktop, wireless keyboard and mouse (B)<br />
** K120 Keyboard (B)<br />
** K200 Keyboard (B)<br />
** K230 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K340 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K350 Wireless Keyboard (B)<br />
** K400 wireless keyboard with touchpad - also listed under "problematic". works for weeks with openelec and raspbian without any problems.<br />
** K520 Keyboard (B)<br />
** K700 Wireless Keyboard with Touchpad and unifying receiver<br />
** K750 Wireless Solar Keyboard (B) (Mac version works too. (B) )<br />
** LX 710 - works fine with receiver plugged directly into the RPi (accompanying mouse works fine too).<br />
** S510 wireless keyboard and mouse (B)<br />
** Ultra-Flat Keyboard (M/N Y-BP62A P/N 820-000245 PID SY126UK)labelled 100 mA. OK direct into Model B RPi.<br />
** G19 Gaming Keyboard, works fine with no external power. Illumination with external power. Powered hum in back of keyboard works too.<br />
** G15 Gaming keyboard, as long as you press the backlight button twice to turn off the backlight (it says below it dosen't work with backlight on.<br />
** V470 Bluetooth Laser Mouse<br />
<br />
''Keyboards and mice also together with Unifying receiver'' <br />
<br />
* '''Microsoft''' <br />
**Microsoft Comfort Curve Keyboard 2000<br />
**Microsoft Comfort Curve Keyboard 3000 for Business<br />
**Microsoft Digital Media Pro Keyboard Model : 1031 (Debian 13-Apr-2012)<br />
**Microsoft Natural Ergonomic Keyboard 4000 (B) (Debian "Wheezy" beta 18-June-2012)<br />
**Microsoft Wired Keyboard 600 Model 1366 (Debian 28-May-2012 on Production Model B)<br />
**Microsoft Wireless Desktop 700 Keyboard v2.0 (Raspbian Pisces image 08-June-2012 on Production Model B)<br />
**Microsoft Wireless Photo Keyboard (Model 1027) Unifying receiver, no hub<br />
**Microsoft Wireless Natural Multimedia Keyboard (Raspbian Pisces 08-July-2012) (B)<br />
**Microsoft Windows 2000 Keyboard (KB-USBK110610)<br />
**[https://www.microsoft.com/hardware/en-us/p/wired-keyboard-600/ANB-00001 Microsoft Wired Keyboard 600]. The keyboard is rated at 5v/100mA (Wheezy 5-Sept-2012)<br />
<br />
* '''Mikomi''' <br />
** Wireless Deskset KM80545 Keyboard and mouse (Works but range is terrible less than a metre) (B)<br />
<br />
* '''Monoprice'''<br />
** [http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10404&cs_id=1040401&p_id=6854&seq=1&format=2|Monoprice PS/2 To USB Adapter] Directly and through an unpowered hub with a USB mouse plugged in.<br />
<br />
* '''Motorola'''<br />
<br />
** Bluetooth wireless ultra slim keyboard and mouse combo (sold as for the "Atrix" phone) work in combination with the Technika Bluetooth adaptor listed below<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/desktopkits/nov-wcombo.html|Novatech Wireless Combo - Keyboard & Mouse, Nano adapter] (B)<br />
<br />
* '''ONN'''<br />
**ONN Keyboard Stock No: ONA11HO089 (from Walmart). Seems to work fine, even without a hub.<br />
**ONN Keyboard Stock No: ONA11HO087 (from Walmart). Combination keyboard and mouse package with nano receiver. Be sure to configure keyboard layout.<br />
<br />
* '''Perixx''' <br />
**Periboard 716 Wireless Ultra-Slim Keyboard with Touchpad (Debian 07-Jun-2012 on Production Model B)<br />
** PERIBOARD-502 wired keyboard inc built in touchpad (model B/raspian wheezy)<br />
** Periduo-707 Plus (Wireless Keyboard and Mouse) works fine ''most'' of the time. Does suffer from dropouts and glitches though. Usual "drawing too much power from USB" problems show up as well - dropped key presses or constant autorepeats. These can be cured by pulling out and reinserting the dongle in the USB socket. The keyboard sometimes hangs after power on when used with my laptop - it seems to need 30 seconds of non-use before it works fine. Again, remove and insert the dongle cures it. Works fine vi my Benq monitor's USB Hub.<br />
<br />
* '''Philips''' <br />
**Wired Multimedia Keyboard SPK3700BC/97 (Debian 19-Apr-2012 on Production Model B)<br />
<br />
* '''Prodige'''<br />
**Nanox Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01]<br />
<br />
* '''Rapoo'''<br />
**Rapoo E9080 Wireless Ultra-Slim Keyboard with Touchpad<br />
**Rapoo Wireless Multi-media Touchpad Keyboard E2700 [http://www.rapoo.com/showdetails.aspx?P_No=E2700]<br />
**Rapoo Ultra-Slim Wireless Multimedia Keyboard and Mouse E9060 (works proper on powered USB Hub)<br />
<br />
*'''Riitek'''<br />
**RT-MWK03 mini wireless keyboard & trackpad<br />
**RT-MWK02+ mini bluetooth keyboard & trackpad. Followed instructions from this page: [http://www.ctheroux.com/2012/08/a-step-by-step-guide-to-setup-a-bluetooth-keyboard-and-mouse-on-the-raspberry-pi/] and it worked, connection persists across reboots, no problem with either builtin USB or powered USB hub.<br />
**RT-MWK01 mini wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
*'''Rosewill'''<br />
** RK-200 Standard Keyboard<br />
<br />
*'''Saitek'''<br />
** Eclipse II Backlit Keyboard PK02AU (B)<br />
** Eclipse Backlit Keyboard PZ30AV (B)<br />
** Expression Keyboard (US) <br />
** Cyborg V.5 (B)<br />
<br />
*'''SelecLine'''<br />
** WK11P & WM11P-SP-PP. Keyboard and mouse set. (B)<br />
<br />
*'''SIIG'''<br />
** SIIG Wireless Multi-Touchpad Mini Keyboard 02-1286A v1.0 (B)<br />
<br />
*'''Silvercrest'''<br />
** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B) <br />
<br />
*'''SolidTek'''<br />
** Solid Tek KB-P3100BU ASK-3100U. <br />
<br />
*'''Sony'''<br />
** Keyboard for PlayStation 2 (PS2) Linux. Works without powered hub with 5v1A supply, requires manual keyboard remapping with Debian Squeeze to USA 101-key layout.<br />
<br />
* '''SteelSeries'''<br />
** Merc keyboard (B)<br />
<br />
* '''Sun Microsystems'''<br />
** Model: Type 7, SUN PN: 320-1348-02 (Danish key layout)<br />
** Model: Type 6, SUN PN: 320-1279-01 (Danish key layout)<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/keyboards/KB060UK/ KB060UK] Wired Multimedia Keyboard<br />
<br />
* '''Technika'''<br />
** WKEY03 (B)<br />
** TKD-211<br />
<br />
* '''Tesco'''<br />
** Value Keyboard VK109 (B)<br />
** Multimedia K211 Wired Keyboard (B)<br />
<br />
*'''The Pi Hut'''<br />
** Super Slim Apple Style Keyboard (from [http://thepihut.com/products/usb-keyboard-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Apple Style Keyboard Set (Keyboard & Mouse) (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust 17916 Compact Wireless Entertainment Keyboard http://www.trust.com/products/product.aspx?artnr=17916 (B)<br />
** Trust ClassicLine Keyboard http://trust.com/17184 <br />
** Trust Camiva MultiMedia Keyboard http://trust.com/products/product.aspx?artnr=16087<br />
** Trust Convex Keyboard http://trust.com/products/product.aspx?artnr=17603 tested debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
<br />
* '''Unbranded'''<br />
** AK-601 Wireless Mini Keyboard and Trackball (with laser pointer) - sourced from eBay Chinese seller<br />
<br />
* '''Unicomp'''<br />
** USB Endurapro - keyboard and trackpoint work perfectly from powered hub<br />
<br />
* '''Q-Connect'''<br />
** AK-808 (B)<br />
<br />
* '''Xenta'''<br />
** 2.4GHz Wireless Multimedia Entertainment Keyboard with Touchpad (B)<br />
** Mini Multimedia Keyboard (Model no.: 808M) (B)<br />
<br />
===Problem USB Keyboards===<br />
<br />
Note that generally PS/2 keyboards with an USB adapter will not work directly on a PI port, due to the fact that PS/2 keyboards are designed for normal 5V +-5% range, while USB keyboards must be designed to work with 4.4 Volt, and generally USB devices on the PI may receive less than 4.75 Volt. PS/2 + USB adapter keyboards might work behind a powered hub, which does provide the full 5.0V. Some of these keyboards work when running the latest raspbian but not when using the overclocked xbmc version of raspbmc, probably due to the overclocking drawing more voltage away from the rest of the support system devices.<br />
<br />
* '''A4 Tech'''<br />
** Model GL-6 USB Keyboard, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''Accuratus'''<br />
** Accuratus KYBAC100-101USBBLK causes kernel panic (rated 100mA). Tested with 1000mA cheap unbranded and Nokia 1200mA power adaptors.<br />
* '''Apple'''<br />
** [http://www.powerbookmedic.com/xcart1/images/D/apple-keyboard.jpg Apple Keyboard (109 keys) A1048]. Draws too much power and does not seem to work properly when plugged into a powered hub. <br />
*'''Argos'''<br />
** Argos Value Wired Keyboard causes kernel panic<br />
* '''Choidy'''<br />
** Identifiers from usb-devices: Vendor=1a2c ProdID=0002 Rev=01.10 Product=USB Keykoard (yes, 'Keykoard') causes kernel panic<br />
* '''Cit''' <br />
** KB-1807UB Causes kernel panic (Rated <200ma)<br />
* '''Dell'''<br />
** SK-8135 (B) (Rated 1.5A. Takes too much power from pi even when not used as USB hub. Symptom = repeated keystrokes)<br />
** SK-8115 causes kernel panic (rated 100mA) Debian 6-19-04-2012 (B)<br />
** Y-U0003-DEL5 Sticky / Non-responsive keys<br />
* '''Gear Head'''<br />
** KB2300U - Causes kernel panic (B)<br />
* '''GMYLE'''<br />
** Wired USB Slim Chocolate Multimedia Media Typing Keyboard With 3 USB Port hub (B) - Kernel Panic on startup if plugged in. If plugged in at login prompt then freeze. [http://www.amazon.co.uk/gp/product/B0067EC3GW/]<br />
* '''Inland''' <br />
** Inland USB Keyboard Model #70010<br />
* '''Jeway'''<br />
** JK-8170 "The Hunter" - causes kernel oops (Debian6-19-04-2012) (B)<br />
* '''Labtec'''<br />
** ultra-flat wireless desktop USB - Keyboard has 'sticky' keys. Tested both debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
* '''Logik'''<br />
** Wired Multimedia Keyboard Model: LKBWMM11 - causes kernel panic (on Debian 190412 distro) (B)<br />
** Wired Ultra Slim Keyboard Model: LKBWSL11 - causes USB power issues. Not reliable. Causes other USB devices to fail (B) >> '''This is also listed under Working USB Keyboards??'''<br />
* '''Logitech'''<br />
** Logitech Illuminated Keyboard (unstable; not working with led light on; tested both US and NO layouts with both Apple iPad 2 and Asus TF-101 USB chargers)<br />
** G110 Gaming Keyboard - only works with illumination off, otherwise unresponsive. Once failed it needs reconnecting before another attempt. (B)<br />
** G15 Gaming Keyboard - LCD and key backlights flicker, 95% unresponsive to typing. I don't know of a way to turn the illumination off. (B)<br />
** K360 Wireless Keyboard - Occasional sticky keys. (B)<br />
** K400 wireless keyboard with touchpad (completely non-functional on debian6-19-04-2012)<br />
** G510 Gaming Keyboard - lagging or unresponsive keys.<br />
** MX5500 wireless keyboard and mouse with usb bluetooth reciever - Unstable, looses connection without prior notice<br />
** EX100 Cordless Desktop, wireless keyboard and mouse. Mouse and keyboard hangs every few minutes (with or without hub).<br />
* '''Microsoft''' <br />
** Wireless Desktop 800 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Entertainment Keyboard - No key input recognized (possibly connectivity issue as pairing devices does not seem to work)<br />
** Wireless Optical Desktop 1000 - Keyboard has 'sticky' keys (B)<br />
** Wireless Keyboard 2000 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Desktop 3000 - Keyboard has 'sticky' keys.<br />
** Arc wireless - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X4 - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X6 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Comfort Keyboard 5000 - Keyboard has 'sticky' keys. (B)<br />
** Razer Reclusa - Keyboard has 'sticky' keys. (B rev 2.0)<br />
* '''Novatech'''<br />
** NOV-KEY2 - Causes kernel panic (B)<ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
* '''PC World Essentials'''<br />
** PKBW11 Wired Keyboard - no power to keyboard, no error messages on both Arch 29-04-2012 and Debian6-19-04-2012, same Pi works with Asda keyboard. Me too, but caused a kernel panic -- tested on powered hub and direct.<br />
* '''Razer'''<br />
** Razer Tarantula gaming keyboard - sticky keys, could be power issue as is programmable with host powered USB hub and audio jacks.<br />
** Razer BlackWidow - Sticky keys, could be a power related issue due to illuminated logo (Blue LED).<br />
* '''SIIG'''<br />
** Wireless Ultra Slim Multimedia Mini Keyboard JK-WR0612-S1 - Unresponsive and sticky keys.<br />
* '''Texet'''<br />
** MB-768B standard keyboard (Rated 5V 1.5A(!), so probably too much power drain. Kernel panic, Debian6-19-04-2012)<br />
* '''Trust''' <br />
** TRUST GXT 18 Gaming Keyboard - No power to keyboard, could be a driver issue - no error messages.<br />
* '''Unbranded'''<br />
** Compuparts<br />
** model no. HK-6106 (B) <ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
** LK-890 (Multimedia keyboard & Optical Mouse) - kernel panic on Debian Squeeze, ArchLinux and Qtonpi.<br />
* '''Verbatim'''<br />
** [http://www.amazon.com/gp/product/B004LB5AKY/ref=oh_details_o00_s00_i02|Verbatim 97472 Mini Wireless Slim Keyboard and Mouse] - Keyboard has lagging, unresponsive and sticky keys issues. (Tested with and without powered USB hub.)<br />
* '''Wilkinsons / TEXET'''<br />
** Model MB-768B causes kernel panic on debian6-19-04-2012.<br />
* '''Xenta'''<br />
** HK-6106 - causes kernel panic (on Debian 190412 distro)(B)<br />
** Multimedia Wireless Keyboard and Mouse Set (Keyboard Model: HK3518B + Mouse Model HM3301) (B) - occasional sticky keys, and occasional complete lock-up<br />
<br />
== USB Mouse devices ==<br />
USB mouse devices that present themselves as a standard HID (Human Interface Device) device should work, however some hardware requires special drivers or additional software, usually only compatible with Windows operating systems. <br />
<br />
===Working USB Mouse Devices===<br />
The following is a list of specific mouse devices known to work and which appear to be fault-free.<br />
<br />
* '''A4Tech'''<br />
** OP-530NU Padless Wired Mouse<br />
<br />
* '''Asda'''<br />
** HM5058 (Smart Price) Wired Mouse<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''ASUS'''<br />
** MS-511U (comes with Asus Vento KM-63 keyboard/mouse combo) (B)<br />
** MG-0919 (wireless)<br />
<br />
* '''Belkin'''<br />
**F8E882-OPT (B)<br />
<br />
* '''Dell'''<br />
** M-UVDEL1 (B)<br />
** M056U0A (B)<br />
** DZL-MS111-L (B) (100mA)<br />
** MS-111P (100mA)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Dynex'''<br />
** DX-WMSE (100mA) (B)<br />
<br />
* '''Fellowes'''<br />
** 99928 USB Micro Track Ball (works without a hub, directly plugged in) (B)<br />
<br />
* '''Filand'''<br />
** OP-102i Mini Optical Mouse<br />
<br />
* '''Genius'''<br />
** GM-04003A (B)<br />
** Slimstar 8000 wireless mouse (Can be intermitent. Mouse pointer sometimes is irratic.)<br />
** Traveler 515 Laser<br />
<br />
* '''HP'''<br />
** MN-UAE96 (The basic stock HP wired mouse)(B)<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''Kensington'''<br />
** Kensington Expert Mouse Trackball K64325<br />
** Kensington Expert Mouse "Slimblade" K72327US<br />
<br />
* '''Labtec'''<br />
** Corded Laser Glow Mouse 1600, rated 5V 100mA (P/N 810-000819, M/N M-UAZ149, PID GT83401)<br />
<br />
* '''Lenovo'''<br />
** Wired Optical Mouse Model: MO28UOL<br />
<br />
* '''Logik'''<br />
** Wired Optical Glow Mouse Model: LGGMO10. (B)<br />
<br />
* '''Logitech'''<br />
** B105 Mouse for Laptops (OEM)<br />
** Cordless Pilot Optical Mouse M/N M-RR95 with Cordless Mouse Receiver M/N C-BA4-MSE<br />
** G5 Logitech Gaming Mouse (B)<br />
** G5v2 Logitech Gaming Mouse (B)<br />
** G500 Logitech Gaming Mouse (B)<br />
** G700 Logitech Wireless Gaming Mouse (B)<br />
** LX-700 Cordless Desktop Receiver (B)<br />
** LX 710 Wireless Mouse - works fine with receiver plugged directly into RPi (accompanying keyboard works fine too).<br />
** M90 optical mouse<br />
** M185 Wireless Mouse (B)<br />
** M210 (part of the MK260 set) (B)<br />
** M305 Wireless Mouse<br />
** M310 Cordless Mouse<br />
** M325 Wireless Mouse<br />
** M505 USB wireless laser, model no: 910-001324 (B)<br />
** M510 Wireless Mouse (B)<br />
** M705 Marathon Mouse (Unifying receiver, no powered hub) (B)<br />
** M-BD58 Wheel Mouse (B)<br />
** M-BJ58/M-BJ69 Optical Wheel Mouse (B)<br />
** M-BJ79 (B)<br />
** M-BT96a Optical Mouse<br />
** MX320/MX400 laser mouse (B)<br />
** MX518 Optical wheel mouse (B)<br />
** Optical USB Mouse (M/N 931643-0403)<br />
** Performance Mouse MX (B)<br />
** MX Revolution (B) (Debian "Wheezy" beta 18-June-2012)<br />
** VX Nano Cordless Laser Mouse for Notebooks<br />
** Wheel Mouse (M/N BJ58)<br />
<br />
* '''Medion'''<br />
** Mini mouse Model M101-CBJ P/N 40016632 S/N 7BFSA00003445 rated 5v 100ms Works fb on model B with raspian wheezy<br />
<br />
* '''Microsoft''' <br />
** Comfort Curve Mouse 3000 for Business<br />
** Comfort Mouse 6000 (works when directly connected to Pi (B). Does not work when connected through USB Hub (mouse pointer intermittent).<br />
** Compact optical mouse 500 V2.0 (B)<br />
** Wheel Optical Mouse (wheel and additional buttons not tested) (B)<br />
** Microsoft Intellimouse Optical Mouse<br />
** Microsoft Wireless Laser Mouse 8000<br />
** Microsoft Wireless Mobile Mouse 1000<br />
** Microsoft Wireless Mobile Mouse 3500<br />
** Microsoft Wireless Mobile Mouse 4000<br />
** Microsoft Wireless Mouse 700 v2.0<br />
** Microsoft Comfort Mouse 4500<br />
** Wireless IntelliMouse Explorer 2.0 (unifying receiver, no hub)<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-mouser.html|Novatech M1 USB Mouse - Wired](B)<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-dl10.html|Novatech DL10 Wireless Mouse] (B)<br />
<br />
* '''Razer'''<br />
** Boomslang Collectors Edition 2007 (B)<br />
<br />
* '''Rosewill'''<br />
** Rosewill RM-C2U<br />
<br />
* '''Saitek'''<br />
** Notebook Optical Mouse (PM46)<br />
<br />
* '''Samsung'''<br />
** Samsung model:AA-SM3PCPB usb Optical Mouse (draws 50mA) <br />
<br />
* '''Sun microsystems'''<br />
** Model: FID-638 , SunPN: 371-0788-01<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/optical-mice/MI015/ MI015]<br />
<br />
* '''Swiftpoint'''<br />
** [http://http://www.americas.futuremouse.com/] Swiftpoint Mini Wireless Optical Mouse. Does not require any special drivers. Haven't confirmed if charging the mouse requires a powered USB hub or not.<br />
<br />
* '''Targus'''<br />
** AMU2701EUK (B)<br />
<br />
* '''Technika'''<br />
** TKOPTM2 (B)<br />
**TKD-211<br />
<br />
* '''Tesco'''<br />
** Wired optical mouse M211 (B)<br />
<br />
*'''The Pi Hut'''<br />
** USB Mouse for Raspberry Pi (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Keyboard & Mouse Set (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust Nanou Wireless Micro Mouse http://trust.com/products/product.aspx?artnr=17087<br />
<br />
* '''Verbatiam'''<br />
**Mini Nano Optical Mouse 97470 (wireless on non-powered 3 usb dongle hub) (B)<br />
<br />
* '''Xenta'''<br />
** MOW0810 (B)<br />
** Wired Optical Mouse (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Generic'''<br />
** Generic 2.4GHz Wireless Mouse (ID 040b:2013 Weltrend Semiconductor) (B)<br />
<br />
===Problem USB Mouse Devices===<br />
The following is a list of specific mouse devices that have problems working with the Raspberry Pi<br />
* '''A4Tech'''<br />
** Model G7-630 Wireless Mouse, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''HP'''<br />
** HP Retractable Mobile Mouse (Optical) HP Product Number XP472AA - errors / boot loop RASPBMC (B)removed mouse, started with no further errors. <br />
<br />
* '''Logik'''<br />
** Logik IMF Blue Trace Wired USB mouse (Model LMWBLU11) - disconnects from the USB port every 20 seconds when using the Raspian distro. Always reconnects to the USB port successfully (B)<br />
<br />
* '''Logitech'''<br />
** Logitech G400 Gaming Mouse - 100% CPU load and laggy mouse cursor when the mouse is moved. MX518 works fine on the same setup, so I suspect it's a polling rate issue. [http://tech2.in.com/reviews/mice/logitech-g400-is-it-a-worthy-successor/231012 this] says the mouse is 1000Hz out of the box, whereas the 518 is only 125Hz. Solution found: add usbhid.mousepoll=8 to the kernel commandline.<br />
<br />
* '''Microsoft'''<br />
** Microsoft Touch Mouse - Does not see right clicks, Only left.<br />
<br />
* '''Razer'''<br />
** Naga Wired USB mouse - the mouse seems to present itself as a keyboard because the numpad on the left-hand side of the device works but the cursor doesn't move.<br />
<br />
* '''Roccat'''<br />
** Kone[+] Wired USB mouse - Nothing happens when moving the mouse, haven't looked further into the issue (B)<br />
<br />
* '''Trust'''<br />
** Optical USB Mouse MI-2250 - Nothing happens when moving the mouse (B)<br />
<br />
* '''Xenta'''<br />
** Multimedia Wireless Keyboard and Mouse Set (Mouse Model: HM-3301) (B) - frequent lost connection giving stuttering mouse cursor indicating USB current not enough for dongle<br />
<br />
== USB Real Time Clocks ==<br />
*Cymbet<br />
** Cymbet CBC-EVAL-06 USB Real Time Clock (FT2232 to SPI to RV-2123)<br />
Device information at http://www.cymbet.com/pdfs/DS-72-22.pdf<br />
Code to access the RTC from Linux: https://github.com/owendelong/Cymbet-RTC<br />
Does not require a powered hub.<br />
<br />
== USB WiFi Adapters ==<br />
<br />
See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing<br />
<br />
There is a howto on installing the TL-WN722N adapter [http://elinux.org/RPi_Peripherals#Wireless:_TP-Link_TL-WN722N_USB_wireless_adapter_.28Debian_6.29 here], which also acts as a guide for installing others too.<br />
<br />
===Working USB Wifi Adapters===<br />
<br />
These adapters are known to work on the Raspberry Pi. This list is not exhaustive, other adapters may well work, but have not yet been tried.<br />
<br />
'''Note:''' A WiFi adapter will probably need more power than the Raspberry Pi USB port can provide, especially if<br />
there is a large distance from the WiFi adapter to the WiFi Access Point. Therefore, you may need to plug the WiFi adapter into a powered USB hub.<br />
<br />
* '''3COM'''<br />
** 3CRUSB10075: ZyDAS zd1211rw chipset (!)<br />
<br />
* '''7DayShop'''<br />
** W-3S01BLK, W-3S01BLKTWIN : Unbranded product available from 7DayShop, in a single or twin pack. [http://www.7dayshop.com/catalog/product_info.php?cPath=777_9&products_id=112046], [http://www.7dayshop.com/catalog/product_info.php?&products_id=112527]. Tested on Debian Wheezy, with the dongle attached directly to the RPi along with the wireless keyboard receiver. Shows up as a Ralink RT5370 device, and no drivers or additional software downloads required. Created wpa.conf, edited 'interfaces' file and restarted the networking. The manufacturer portion of the MAC address (7cdd90) is assigned to "Shenzhen Ogemray Technology Co., Ltd."<br />
** It works without additional software connected directly to a Rev 2 Pi but stops working after a period of time (3 to 4 hours) with a fully updated Wheezy and all the 'USB workarounds' [http://elinux.org/Rpi_USB_check-list] in place. <br />
<br />
* '''Alfa'''<br />
** AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware package)<br />
** AWUS036NH: Tested on Arch Linux ARM using the rt2800usb module.<br />
** AWUS036NH: Tested on Debian Wheezy (with Ralink firmware package). Tested on Raspbian too (drivers from aircrack-ng).<br />
** AWUS036H (500mW version): Tested on Raspbian (drivers from aircrack-ng).<br />
** AWUS036H (1W version): Tested on Raspbian (drivers from aircrack-ng). Needs USB powered HUB or Rev2 of the board / polyfuse bypass.<br />
** AWUS036NHA: Tested on Raspbian (drivers from aircrack-ng). Works fine if connected after boot, otherwise Raspberry Pi won't boot up.<br />
<br />
* '''AirLink101'''<br />
** AWLL5088: Tested on Debian Wheezy. This adapter is based on the OEM Edimax EW-7811Un. For automatic installation, See MrEngmanns script listed below under the Edimax device.<br />
<br />
* '''Asus'''<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N10] USB ID 0b05:1786, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B) (not needed with latest Raspbian “wheezy” 2012-07-15: this Asus works N10 out of the box) Does not support nl80211 APIS, so hostapd won't work.<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N13] USB ID 0b05:17ab, works with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1 image] as it includes kernel [http://www.element14.com/community/message/57635#57660 with 8192u driver built-in] (B)<br />
** WL-167G v1 USB ID 0b05:1706, Ralink RT2571 working out-of-the-box on Debian image from 2012-04-19. Requires powered hub, otherwise it is detected by OS but will not function.<br />
<br />
* '''Belkin'''<br />
** Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]. On Debian requires the firmware-ralink package from the non-free repository. The usbcore module needs to be added to /etc/modules [http://www.penguintutor.com/blog/viewblog.php?blog=6281 install instructions].<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Tested on OpenELEC (works OOB), RaspBMC (works OOB), Raspian - 2012-07-15-wheezy-raspbian (followed [http://forum.xbian.org/viewtopic.php?f=7&t=29 instructions here]) '''Powered hub required!'''<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Works on RaspBMC OOB (with NetworkManager plugin). Works WITHOUT powered hub on 5v 800mA power with 6 overvolt (nothing else connected to USB)<br />
** Belkin Components F7D1101 v1 Basic Wireless Adapter [Realtek RTL8188SU] USB ID 050d:945a, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B)<br />
**Belkin Components F6D4050 V1 [Realtek RT3070] USB ID: 050d:935a Driver: RT3572STA(recommended),RT2800USB,RT2870STA. Tested under Arch using [https://wiki.archlinux.org/index.php/Setting_Up_Belkin_F6D4050_Wireless_USB_Dongles this] guide.<br />
**Belkin Components F6D4050 V1/V2 [Realtek RT3070] USB ID: 050d:935a / 935b Driver: RT3572STA. Tested with Raspbian - See [http://iggy82.blogspot.co.uk/2012/08/wireless-n-raspberry-pi-belkin-f6d4050.html installation instructions] - Powered hub not required!<br />
** Belkin Components F7D2102 "N300" Micro Wireless USB adapter. Tested with Occidentalis 0.1. Tested and working on Rasbian wheezy (and RaspBMC), driver RTL8192CU, no powered hub needed (dongle directly attached to the onboard ports)<br />
** Belkin Components F9L1001v1 "N150" Wireless USB Adapter. Tested and working on Rasbian wheezy WITHOUT powered hub. <br />
** Belkin Surf Micro WLAN USB-Adapter (Raspbian Wheezy, unpowered hub, "N150")<br />
<br />
* '''BlueProton'''<br />
** [http://www.element14.com/community/docs/DOC-44703 BT3] USB ID: 0bda:8187; tested on Debian, Fedora & Arch; rtl8187 driver (B)<br />
<br />
* '''Buffalo'''<br />
** USB ID: 0411:01A2 WLI-UC-GNM - Tested on Raspbmc; rt2800usb driver <br />
<br />
* '''Conceptronic'''<br />
** C300RU. Works out of the box in Raspbian. Causes reboot when plugging on a live Rev. 2 RPi<br />
<br />
* '''Conrad'''<br />
** WLAN Stick N150 mini. Works out of the box in OpenELEC, [http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/ requires firmware-realtek and r8712u kernel module on Debian].<br />
** WLAN Stick N150 Nano [Realtek RTL8188CUS]. Requires a powered USB hub. See Micronet SP907NS for installation instructions and script.<br />
<br />
* '''DIGICOM'''<br />
** USBWAVE54 [chipset Zydas ZD1211] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave54]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with zd1211-firmware . <br />
** USBWAVE300C [chipset Ralink 2870] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave300c]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with firmware-ralink . <br />
<br />
* '''D-Link'''<br />
** AirPlus G DWL-G122 (rev. E). USB ID 07d1:3c0f, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository. (However I experience total crashes on raspbian 2012-07-15 after a few minutes of load on the wlan. Will have to investigate via serial console.)<br />
** AirPlus G DWL-G122 (rev. C). USB ID 07d1:3c03, Ralink RT2571. Working out-of-the-box on Arch image from 2012-04-29.<br />
** AirPlus G DWL-G122 (rev. B1). USB ID 2001:3c00, Ralink RT2571. Working out-of-the-box on Arch image from 2012-06-13.<br />
** DWA-110 (Version A1). Requires the ralink package from the non-free repository on Debian.<br />
** DWA-121 (Version A1). Wireless N 150 Pico. Works out-of-the-box with Raspian Wheezy (2012-09-18)<br />
** DWA-123 (Version A1). USB ID 2001:3c17, Ralink RT2800. Working out-of-the-box on Arch image from 2012-04-29. (working without UBS Hub - not yet sure if it achieves full speed though.)<br />
** DWA-131 USB ID 07d1:3303,Realtek RTL8192SU, 802.11n Wireless N Nano. Works out of the box on Raspbian “wheezy”. Verified with direct USB : no powered USB hub needed. Also verified when Nano used in powered USB hub. Someone had trouble configuring SSID/Passphrase in etc/network/interfaces file. But no problem & very easy to configure using wicd : wicd is a gui interface on LXDE for network configuration. Install it using command-line : <code>apt-get install wicd</code>. Once configured ith wicd to auto-run on boot, no need to turn back to LXDE. Recommended.<br />
** DWA-140 (Version B1). USB ID 07d1:3c09, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-140 (Version B2). USB ID 07d1:3c0a, Ralink RT3072. Workaround for faulty firmware binary: Place file rt2870.bin from [https://launchpad.net/ubuntu/oneiric/+source/linux-firmware/1.53/+files/linux-firmware_1.53.tar.gz linux-firmware_1.53.tar.gz] in /lib/firmware. [https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/770232 Explanation].<br />
** DWA-160 (Version B1). USB ID 07d1:3c11, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-160 (Version A2). USB ID 07d1:3a09, Atheros AR9170. (NOTE: I can only get it to work through powered USB hub) requires carl9170-fw firmware [http://http://aur.archlinux.org/packages.php/packages.php?ID=44102]<br />
<br />
* '''Edimax'''<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] USB ID 7392:7811, RTL8192CU, driver blob [http://www.electrictea.co.uk/rpi/8192cu.tar.gz download] via [http://www.element14.com/community/docs/DOC-44703 Element14], works with WPA2-AES-CCMP ([http://www.ctrl-alt-del.cc/2012/05/raspberry-pi-meets-edimax-ew-7811un-wireless-ada.html howto]) (B) - [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Alternative driver download link that works with Raspian]<br />
** The EW-7811Un can be powered directly from the Raspberry Pi if the Raspberry Pi is powered using a well regulated power supply.<br />
** A script-based installation for the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] by MrEngman can be found [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=26&t=6256&hilit=edimax on the RasPi forums]. Tested with Debian Squeeze and Raspbian. [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt An installation guide can be found here.]<br />
** Instructions for getting the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] working in Raspbmc (tested RC3) can be found [http://forum.stmlabs.com/showthread.php?tid=780 here].<br />
** Simple step-by-step instructions for [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] which uses the RTL8192 chipset [[RPi_edimax_EW-7811Un]](B)<br />
** [http://www.edimax.com/en/produce_detail.php?pd_id=8&pl1_id=1&pl2_id=44 EW-7318USg] USB ID 148f:2573, rt73usb. RT2573 chipset. Works with powered usb-hub or shorted polyfuses.<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=261&pl1_id=1&pl2_id=44 EW-7711UAn], Ralink RT2870, works perfectly on Arch with a powered hub (not tested without yet). Simply required wireless_tools and wpa_supplicant, the drivers/firmware are included in kernel 3.0. I followed the Arch [https://wiki.archlinux.org/index.php/Wireless_Setup Wireless Setup] instructions.<br />
<br />
* '''edup'''<br />
** [[http://www2.buyincoins.com/details/usb-150m-wifi-wireless-lan-network-card-adapter-antenna-product-1916.html Edup 150MBPS wifi adapter]] USB ID: 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to install the firmware as rt2870.bin in /lib/firmware.([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) (B)<br />
** [http://www.szedup.com/show.aspx?id=1681 edup nano EP-N8508] Use method shown [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=7471&p=91736 here] for debian. Requires powered USB hub for adequate power. When directly powered by Pi, it fails after a few minutes. (B) Unusable with analog audio because when data is being send or recieved the audio get disorted.<br />
<br />
* '''Eminent'''<br />
** EM4575 - rt2800usb driver.<br />
<br />
* '''EnGenius'''<br />
** EUB9603 EXT - Realtek r8712u driver <br />
<br />
* '''Gigabyte'''<br />
** Gigabyte GN-WB32L 802.11n USB WLAN Card. Works with the rt2800usb driver.<br />
<br />
* '''GMYLE'''<br />
** Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.<br />
<br />
* '''IOGear'''<br />
** [http://www.element14.com/community/docs/DOC-44703 GWU625] USB ID 0bda:8172, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian Squeeze and install firmware-realtek from non-free squeeze repo. No need to download firmware when using Debian Wheezy (B)<br />
<br />
* '''Linksys'''<br />
** Linksys (Cisco) WUSB100 ver.2 1737:0078, tested on raspbian; follow [http://www.brucalipto.org/linux/the-raspberry-diary-wusb100-wireless-n/ Brucalipto.org] instructions; not stress tested but works without issues for light network load.<br />
** Linksys (Cisco) WUSB600N, test on raspbian, details [http://elibtronic.ca/content/20120731/raspberry-pi-part-1-wifi-support here]<br />
<br />
* '''LogiLink'''<br />
** Wireless LAN USB 2.0 Nano Adapter 802.11n LogiLink [http://www.logilink.eu/showproduct/WL0084B.htm] is working even usb powered.<br />
<br />
* '''Micronet'''<br />
** Micronet SP907NS, 11N Wireless LAN USB Adapter (uses Realtek RTL8188CUS) works plugged directly into R-Pi USB (B) [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt Debian installation instructions] IMPORTANT: read the instructions first to avoid problems, and [http://dl.dropbox.com/u/80256631/install-rtl8188cus-latest.sh Auto-install script]. The script has been used to install other adapters using the RTL8188CUS chip. [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Updated driver] that handles the latest rpi-updates that kill the original driver, download for manual installation, automatically installed by the Auto-install script.<br />
<br />
* '''MSI'''<br />
** 0db0:6861 MSI-6861 802.11g WiFi adapter (US54G): works with external powered USB hub, requires firmware from [http://sourceforge.net/projects/zd1211/files/zd1211-firmware/ here], power management must be disabled: <code>iwconfig wlan0 power off</code><br />
<br />
* '''Mvix'''<br />
** Mvix Nubbin (MS-811N): works out of the box on Raspbian "wheezy" and does not need a powered USB hub.<br />
<br />
* '''Netgear''' <br />
** N150: Reported as WNA1100 device, uses the Atheros ar9271 chipset. On Debian, requires the <code>firmware-atheros</code> package from the <code>squeeze-backports</code> non-free repository (!)<br />
** N150: Some versions reported as Realtek RTL8188CUS device. Read Micronet entry above and use RTL8188CUS script for installation. Works best plugged into powered USB hub.<br />
** WG111v1: Prism54 chipset. Needs powered hub. Follow info for Prism54 chipset on Debian wiki.<br />
** WG111v2: Realtek rtl8187 chipset (!)<br />
<br />
* '''OvisLink'''<br />
** Evo-W300USB: USB ID 148f:2270 Ralink Technology RT2770. apt-get install firmware-ralink<br />
<br />
* '''Patriot Memory'''<br />
** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered usb hub.<br />
** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module<br />
<br />
* '''Ralink'''<br />
** inner 02 joggler wifi usb RT2770F USB-ID 148f:2770 (firmware-ralink required) (only got dhcp on powered hub)<br />
** [http://www.dx.com/p/24688 RT2070] USB-ID 148f:2070 firmware is already loaded into Raspbian. For Debian, the firmware must be installed ([http://wiki.debian.org/rt2870sta instructions]). Needs a powered USB hub.<br />
** [http://www.element14.com/community/docs/DOC-44703 RT2501/RT2573] USB-ID 148f:2573 (firmware-ralink required) (B)<br />
** RT5370 USB-ID 148f:5370 ([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) [[RPi_Ralink_WLAN_devices]](B). An image of an adapter with this chip can be found [http://i.imgur.com/wRF7L.jpg here].<br />
<br />
* '''Rosewill'''<br />
** RNX-N180UBE Wireless B/G/N Adapter<br />
*** Realtek RTL8191SU chipset, USB-ID 0bda:8172<br />
*** Tested in Arch, works out of box. Powered USB hub required.<br />
*** Tested in Raspbian, used wicd to configure network settings. Powered USB hub Required.<br />
*** Tested in Raspbmc. Needs package firmware-realtek and used wicd-curses to configure. Powered USB hub required<br />
** RNX-G1 Wireless B/G Adapter<br />
*** Realtek RTL8187 chipset, USB-ID 0bda:8187<br />
*** Tested in Arch, works out of box. USB hub required.<br />
** RNX-MiniN1 (RWLD-110001) Wireless-N 2.0 Dongle (Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter)<br />
*** Tested in Raspbian, powered from USB hub.<br />
<br />
* '''Sagem'''<br />
** Sagem Wireless USB stick XG-760N : USB ID 079b:0062, Module is not shipped in Debian image, but can be "sudo apt-get install zd1211-firmware"<br />
<br />
* '''Sempre'''<br />
** Sempre Wireless USB stick WU300-2: USB ID 0bda:8172, Realtek r8712u driver + firmware-realtek package. Module is shipped in Raspbian image. If you need to build it for other distros, read this: http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/<br />
<br />
* '''SL'''<br />
** SL-1507N: USB 802.11n 150M WiFi Wireless Lan Network Card Adapter SL-1507N Black<br />
*** I bought this on on eBay for $4.19 (free shipping) @ http://www.ebay.com/itm/270853614804?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_4379wt_1199<br />
*** It worked out of the box on Raspbmc RC4, with the network manager add-on; seems to be an rt2800usb<br />
*** dmesg output "usbcore: registered new interface driver rt2800usb"<br />
<br />
* '''SMC'''<br />
** SMCWUSBS-N : Hardware detected as rt2800 but missing firmware; "sudo apt-get install firmware-ralink" fixed it<br />
** SMCWUSB-G : Gives "couldn't load firmware" error. "sudo apt-get install zd1211-firmware" fixes it.<br />
<br />
* '''Sony'''<br />
** Sony UWA-BR100 802.11abgn Wireless Adapter [Atheros AR7010+AR9280] (Vendor ID: 0411, Product ID: 017f) - Tested with Raspbian. Needs package firmware-atheros.(B)<br />
<br />
* '''Tenda''' <br />
** USB 11n adapter on a G network: Ralink 2870/3070 driver (!)<br />
** Tenda W311U Mini 11N Wireless USB Adapter (USB-ID 148f:3070): Ralink 2870/3070 driver; needs powered hub. [http://blog.modmypi.com/2012/06/installing-tenda-w311u-mini-wireless.html Debian installation instructions]<br />
** Tenda W311U+ Wireless USB Adapter - Tested with Raspian.<br />
<br />
*'''The Pi Hut'''<br />
** USB 802.11n WIFI adapter (from [http://thepihut.com/products/usb-wifi-adapter-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''TP-Link'''<br />
** TL-WN422G v2 (ath9k_htc) Works OOTB in Debian Wheezy Beta. Runs without powered Hub when plugged into running RasPi, but the RasPi won't boot while the stick is plugged in.<br />
** TL-WN721N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B) | works OOTB with wheezy raspbian (2012-08-16) connected directly to raspberry pi (B) and AP functionality tested with hostapd.<br />
** TL-WN722N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B)<br />
** TL-WN821N v3 (ath9k_htc, htc_7010.fw); works out of the box on ArchLinuxARM and on OpenElec (>r11211), Problems with prior OpenElec; needs powered USB Hub (B) <br />
<br />
* '''Trendnet'''<br />
** [http://www.wikidevi.com/wiki/TRENDnet_TEW-648UBM TEW-648UBM] USB ID: 20f4:648b, works OOTB with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/ Adafruit Occidentials Raspbian Wheezy variant] as it includes kernel with [http://www.wikidevi.com/wiki/Special:Ask?title=Special%3AAsk&q=%5B%5BChip1+model%3A%3ARTL8188CUS%5D%5D&po=%3FInterface%0D%0A%3FFCC+ID%0D%0A%3FVendor+ID%0D%0A%3FDevice+ID%0D%0A%3FChip1+model%0D%0A%3FSupported+802dot11+protocols%0D%0A%3FMIMO+status%0D%0A%3FOUI%0D%0A&sort_num=&order_num=ASC&eq=yes&p%5Bformat%5D=broadtable&p%5Blimit%5D=500&p%5Bsort%5D=&p%5Boffset%5D=&p%5Bheaders%5D=show&p%5Bmainlabel%5D=&p%5Blink%5D=all&p%5Bsearchlabel%5D=&p%5Bintro%5D=&p%5Boutro%5D=&p%5Bdefault%5D=&p%5Bclass%5D=sortable+wikitable+smwtable&eq=yes RTL8188CUS driver built-in] (B)<br />
<br />
* '''Widemac'''<br />
** RT5370 Wireless Adapter from [http://www.ebay.co.uk/itm/180887771838?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Ebay] runs without powered hub. Follow these [http://elinux.org/RPi_Ralink_WLAN_devices instructions] but go to [http://ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/ ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/] and pick the latest firmware-ralink_0.xx_all.deb<br />
<br />
* '''ZyXEL'''<br />
** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)<br />
<br />
===Problem USB Wifi Adapters===<br />
<br />
These adapters were tested and found to have issues the Raspberry Pi. Note [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=6928] as a possible solution/explanation for errors while running LXDE.<br />
<br />
* '''Alfa'''<br />
** AWUS036NHA (Vendor ID: 0cf3, Product ID: 9271) - Tested with Raspbian. Works fine if connected after boot. Kills boot process if previously attached. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=16809&p=169469#p169469 Details here.]<br />
<br />
* '''EDIMAX'''<br />
** EW-7811Un (Vendor ID: 7397, Product ID: 7811) - Reports as containing the Realtek RTL8188CUS chipset listed below, no lockup or kernal oops under wheezy but dmesg reports constant timeouts trying to initialize the module.<br />
<br />
* '''Linksys'''<br />
** WUSB300N (Vendor ID: 13B1, Product ID: 0029) - Tested with Raspbian, OpenELEC, among others. No Linux chipset support for Marvell 88W8362 at all.<br />
<br />
* '''LogiLink'''<br />
** WL0085 tested under debian (squeeze, wheezy, raspbian); no stable connection can be established. This gets even worse when X is running.<br />
<br />
* '''MicroNEXT'''<br />
** MN-WD152B (Debian image) modprobe hangs when plugged in, lsusb hangs. udevd errors in the logs. [http://www.element14.com/community/thread/17632] [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=6737]<br />
*** Possible fix: try the new [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1] image (based on Raspbian Wheezy) as it includes the needed 8192cu driver builtin to the kernel<br />
<br />
* '''Netgear'''<br />
** WNDA3100v2 tested with debian (wheezy); no driver for broadcom chipset (see [http://www.wikidevi.com/wiki/Netgear_WNDA3100v2 http://www.wikidevi.com/wiki/Netgear_WNDA3100v2]).<br />
<br />
* '''Realtek'''<br />
** RTL8188CUS USB-ID 0bda:8176, kernel oops in dmesg and freeze when pulled from USB. (B)<br />
<br />
* '''Trendnet'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TEW-424UB] USB ID: 0bda:8189; tested on Debian, Fedora & Arch; rtl8187 driver; errors with LXDE running (B)<br />
<br />
* '''TP-Link'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TL-WN821N] USB ID: 0cf3:7015; tested on Debian; requires [http://linuxwireless.org/download/htc_fw/1.3/htc_7010.fw htc_7010.fw] firmware; ath9k_htc driver; errors with LXDE running (B)<br />
** TL-WN723N USB ID: 0bda:8176; tested on Arch without a powered hub; it seems to draw too much current.<br />
<br />
== USB Bluetooth adapters ==<br />
===Working Bluetooth adapters===<br />
* Asus USBIA-EG (paired with Asus Blutooth Keyboard/Media Center Remote<br />
** Verified works error-free in XBMC. Text echo problems exist in Raspbian<br />
* Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) - (USB ID 0a12:0001)<br />
** Example of above is; TOPDIGI UA01 Bluetooth USB Dongle Plug and Play (install bluez package from std repos)<br />
** Tesco own brand 'Technika' Nano Bluetooth Adaptor has the Cambridge Silicon Radio chipset and works fine, cost £5.97 at time of posting.<br />
** Hama USB Bluetooth 3.0 adapter (Class 1) ~£10 on amazon.co.uk.<br />
** Another sample: Product ID: 0a12:0001, pictured here: http://www.element14.com/community/message/58288<br />
** RiiTek RT-MWK02+ - comes with a usb bluetooth adapter that works perfectly for both the RiiTek mini bluetooth keyboard/mouse and other bluetooth devices. Tested both on builtin USB and on powered USB hub. There are other RiiTek bluetooth (and non-bluetooth wireless) devices on the working list. Bluetooth adapter shows up in lsusb as "0a12:0001 Cambridge Silicon Radio" - this is notable as most other sources of this chipset do not seem to be available in the US.<br />
* D-Link DBT-122, with ID 07d1:f101, using a Broadcom chip<br />
** http://www.element14.com/community/message/58288<br />
* IOGear GBU321 (Broadcom BCM2045 Chipset)<br />
** Works with Raspbian Wheezy directly attached to Pi and via powered USB hub.<br />
* Trust BT-2400p<br />
** Working well with Raspbian Wheezy directly attached to Pi. Using with sma-bluetooth (SMA Solar Inverter reading software).<br />
<br />
===Problem Bluetooth adapters===<br />
* '''Belkin'''<br />
** Belkin F8T017. Tested with Raspbian 2012-07-15 and bluez installed with apt-get. When dongle is inserted into Pluscom powered USB hub, my remote PuTTY session scrolls incredibly slowly (testing with ls -R to generate text). Suspect network issue. Lots of errors on dmesg too. Pi itself is responsive when using directly. On removal of the device everything goes back to normal.<br />
* '''Generic'''<br />
** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.<br />
* Asus USB-BT211<br />
** Shows up as HCI device in Raspbian, but does not scan or pair.<br />
** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962<br />
<br />
== USB Ethernet adapters ==<br />
===Working Ethernet adapters===<br />
* '''Wintech'''<br />
** USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver. Probably needs more than 100 mA current. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=46&t=8708#p106136]<br />
* '''LogiLink'''<br />
** USB 2.0 UA0144: AX88772 chipset using the asix kernel driver. Tested only on powered USB hub so far.<br />
** LogiLink Fast EN USB 2.0 to RJ45 Adapter: Test on wheezy-Raspian (2012-08-16) without USB Hub will be confirmed<br />
lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter <br />
* '''Apple'''<br />
** Apple USB Ethernet Adapter using asix kernel driver. Works out of the box on Raspbian, haven't tested on any other OS.<br />
* '''Edimax'''<br />
** Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Works out of the box. Needs its own power source.<br />
* '''A-Link'''<br />
** A-Link NA1GU Gigabit USB 2.0 ethernet adapter<br />
This adapter works, but (probably) requires a bit of work. The driver for the chipset (Asix AX88178) included with the Raspbian kernel (v 3.1.9+ Aug 7 2012) does '''not''' work. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. :-( In order to make it work you need to download the latest driver from [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=84;71;100&PLine=71 the chipset manufacturer]. The version I used was "Linux kernel 3.x/2.6.x Driver" v4.4.0, released 2012-05-18. Fortunately this is GNU GPLv2 -licenced source code and not a binary blob, so compiling it for the Raspberry Pi is perfectly doable. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. >:-( Fortunately there is [https://www.grendelman.net/wp/compiling-kernel-modules-for-raspbian-raspberry-pi a very useful guide] for how to get the sources from github, and preparing that source so that you can compile modules. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make && sudo make install". Reboot and you should have a fully working ethernet adapter.<br />
<br />
The adapter seems to work without a powered USB hub, but according to the specifications it can draw up to 190 mA, so there might be stability issues if additional power is not provided.<br />
<br />
===Problem Ethernet adapters===<br />
* Axago<br />
** Axago ADE-X1 10/100 Ethernet Adapter (usb: 9710:7830 driver:mcs7830). Adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. Needed to unplug and plug USB again. Tested with and without powered USB hub.<br />
<br />
== USB Sound Cards ==<br />
You will usually want the <code>alsa</code> package for sound. In the Debian image for Raspberry Pi (and possibly other distributions) USB sound cards are prevented from loading as the first sound card, which can be an annoyance if it's the only device you have. To disable this behaviour edit <code>/etc/modprobe.d/alsa-base.conf</code> and comment out the last line; <code>options snd-usb-audio index=-2</code> . If you are not user ''pi'' you may need to add your username to the ''audio'' group thus: <code>sudo adduser yourusername audio</code> (user ''pi'' usually belongs to this group anyway).<br />
<br />
* '''Creative'''<br />
** [http://asia.creative.com/products/product.asp?category=1&subcategory=207&product=17892 Sound Blaster Play!]<br />
* '''Daffodil'''<br />
** [http://www.amazon.co.uk/gp/product/B002FI7GWK/ref=oh_details_o03_s00_i00 USB Sound Adaptor US01] ('''NB:''' Headphone output only checked so far, some notes on progress etc. can be found at [http://www.cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor.html cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor] - 14.09.2012)<br />
* '''Edirol'''<br />
** [http://www.roland.com/products/en/UA-1A/ UA-1A]<br />
* '''Hercules'''<br />
** [http://www.hercules.com/fr/Cartes-Son/bdd/p/123/gamesurround-muse-xl-pocket-lt3/ Gamesurround Musel XL (Pocket LT3)]<br />
* '''Logilink'''<br />
** [http://www.logilink.de/showproduct/UA0053.htm?seticlanguage=en UA0053 USB Soundcard with Virtual 3D Soundeffects LogiLink]<br />
* '''Terratec'''<br />
** [http://www.terratec.net/fr/produkte/Aureon_Dual_USB_12339.html Aureon Dual USB]<br />
<br />
==USB 3G Dongles==<br />
* Huawei E173<br />
* Huawei E220<br />
* Huawei E160 (AT commands only)<br />
* Franklin U600 from Sprint / VirginMobile<br />
** Use usb_modeswitch and vendor 0x1fac and product 0x0150/0x0151<br />
* Digicom Internet Key 7.2 HSUPA '''MU372-L01''' [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MU372L01]<br />
Tested on Raspbian and Archlinux. Detected as 230d:0001. Works with cdc_acm driver. Install usb_modeswitch.<br />
There are 2 "com ports"( /dev/ttyACM0 and /dev/ttyACM1 ) . Tested with Network Manager.Works also perfectly with SAKYS3G [http://www.sakis3g.org/] tools (!! led is always off !!) and wvdial. A working wvdial.conf : http://ubuntuforums.org/showpost.php?p=10361881&postcount=28 . (for example for Vodafone IT , replace Init3 with this : Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" and replace line Modem = /dev/ttyUSB0 with Modem = /dev/ttyACM1 ) and run with wvdial voda .<br />
<br />
== USB IR Receivers==<br />
SMK Manufacturing, Inc. eHome Infrared Receiver (Works out of the box with OpenELEC)<br />
<br />
== USB Radio devices==<br />
*FM Radio<br />
** ADS InstantFM Music - FM radio tuner works fine under debian.<br />
<br />
== USB TV Tuners and DVB devices==<br />
*August<br />
**DVB-T205, based on rtl2832u chipset, working with [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0 this driver]. Tested with Saorview (Irish DTT service), both HD & SD.<br />
*DVBSky<br />
**[http://dvbsky.eu/Products_S860.html Mystique SaTiX-S2 Sky USB]: Scanning/watching SD and HD works via vdr and streamdev plugin, watching on the Pi directly is laggy as hell. DVB-USB and I2C support must be enabled in the kernel. Needs drivers/firmware from [http://dvbsky.eu/Support.html here]. <br />
*Hauppauge<br />
** Hauppauge NOVA-T Stick (Revision 70xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge NOVA-TD Stick (Revision 52xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge WinTV-HVR-1950 (tested analog tuner with omxplayer)<br />
*K-World<br />
** K-World UB499-2T Dual DVB-T USB Tuner. IT9137 chipset. With no other USB devices connected Pi can just about power this stick. IR and supplied remote work with XBMC.<br />
*Technisat<br />
**Technisat_SkyStar_USB_HD. Instructions: http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_HD Used the Pi to receive and redirect it via network to another host. Didn't try to play back the stream on the Pi itself. Tested with Astra 19.2E radio and SD-TV channels<br />
*Generic<br />
** [http://www.onsources.com/product_images/a/757/watch_and_record_digital_tv_dongle__44323_zoom.jpg DVB-T USB Dongle (Silver casing)], based on AF9015 chipset.<br />
** [http://www.electrodepot.fr/media/catalog/product/cache/1/image/500x/9df78eab33525d08d6e5fb8d27136e95/P926993.jpg DVB-T USB Dongle], based on RTL2832 FC12 (HD/SD), IR detected but not tested<br />
<br />
== USB Webcams ==<br />
<br />
Debian image is missing v4l kernel modules, so video devices are not available. Kernel and firmware upgrade can possibly be used to fix this[http://blog.pixelami.com/2012/06/raspberry-pi-firmware-update-for-debian-squeeze/].<br />
<br />
===Working USB Webcams===<br />
*'''Creative'''<br />
**Creative VF0470 Live! (works out of the box on ArchLinux)<br />
**Creative VF0260 Live! Cam Vista IM (works out of the box)<br />
**Creative VF0640 Live! Cam Socialize (works on Raspbian at 320x240 resolution, 15fps)<br />
**Webcam Notebook PD1170 (detects, untested)<br />
<br />
*'''HP'''<br />
**Webcam HD-2200 [http://www.amazon.com/HP-Webcam-HD-2200-BR384AA-ABA/dp/B004UR9P9Q/ (Amazon)] [http://shopping.hp.com/en_US/home-office/-/products/Electronics/Webcams/BR384AA?HP-HD-2200-Webcam (HP)] [http://www.walmart.com/ip/HP-Webcam-HD-2200/16775645 (Walmart)] <br />
**Webcam HP-3100 - UVCVideo /dev/video0 Needs chmod to 666 to operate. Will work without hub if only device in USB ports. Works with both Arch and wheezy out of the box<br />
<br />
*'''Logitech'''<br />
**Webcam C100 Model Number V-U0013 (works fine without powered hub - Tested on 2012-08-16-wheezy-raspbian image - motion detection was good - video streaming was really slow might be unusable)<br />
**Webcam C200<br />
**Webcam C270 (with external power)<br />
**Webcam C310 does not require a powered hub to capture snapshots<br />
**Webcam C510<br />
**Webcam C525 (works fine without powered hub)<br />
**HD Webcam C615 (works fine without powered hub)<br />
**Webcam C910 (with external power, is uncvideo)<br />
**QuickCam Orbit/Sphere USB webcam (ext. power) <br />
**QuickCam Pro 9000 - powered by Raspi, working on debian wheezy<br />
**Webcam Pro 9000 (046d:0809), powered by RPi (measured ~120 mA capturing at ~5 fps), works on Arch<br />
<br />
*'''Medion'''<br />
** MD86511 - powered by Raspi, working on Raspbian “wheezy” from 2012-07-15<br />
<br />
*'''Microsoft'''<br />
**Xbox Live Vision camera (045e:0294), powered by Raspi, working on Arch<br />
**LifeCam Cinema 720p USB HD Webcam H5D-00001 - Powered by USB Hub. Working on Raspbian "wheezy"<br />
**LifeCam HD-6000 - Powered by Raspberry Pi. Working on Raspbian "wheezy" (2012-07-15)<br />
**LifeCam NX-6000 - Powered by Raspberry Pi. Working on Debian "wheezy"<br />
**LifeCam VX-7000 - Powered by USB Hub. Working on Raspian "wheezy"<br />
**LifeCam VX-3000 - On "raspbian" wheezy (though there do appear to be some issues with image quality and getting partial frames and such, with fswebcam)<br />
**LifeCam VX-800 - Powered by Raspberry Pi. Working out of the box on Raspbian [http://www.amazon.it/Microsoft-JSD-00008-LifeCam-VX-800/dp/B0057FWVSC (Amazon)] Doesn't work at full 640 * 480 resolution but OK at 352 * 288.<br />
<br />
*'''Sony'''<br />
**PlayStation Eye (for PlayStation 3) (the occasional frame is corrupted/stutters when running at 640x480)<br />
**PlayStation Eyetoy (for PlayStation 2) (Occasional 'mangled frame' directly connected to Rev 2 Pi)<br />
<br />
*'''Trust'''<br />
** 2MP Auto Focus Webcam (works out of the box on ArchLinux)<br />
<br />
===Problem USB Webcams===<br />
<br />
*'''Creative'''<br />
**WebCam Pro / PD1030 - ov519 driver crashes almost immediately. ("gspca: ISOC data error: [0] len=0, status=-4004")<br />
<br />
*'''Logitech'''<br />
**Webcam Pro 9000 - Has issues capturing images at higher than default resolutions (using motion - Arch and Debian).<br />
**Webcam Pro 4000 - It uses pwc driver which does not work. Maybe it's because of general Raspi USB bug.<br />
<br />
*'''Microsoft'''<br />
**Lifecam HD5000 - Picture breaks up at the bottom<br />
**LifeCam Studio/Cinema - Has UVC issues detailed here [http://www.ideasonboard.org/uvc/#devices]. Horizontal lines problem [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12304]. Stability issues [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12247].<br />
<br />
*'''Sony'''<br />
**Eye Toy (PlayStation 2) model SLEH 00030 - (OV519 camera). Picture constantly breaks up on xawtv and wxcam under Arch Linux. Noted there were ISOC data error len=0 status=-4004 errors in dmesg. This happens when powered from the Pi and when powered from a Pluscom USB hub. Arch was updated on 17th July 2012<br />
<br />
*'''Trust'''<br />
**SPACEC@M 200 - (OV511 camera). Picture stops after a few seconds in xawtv under Arch Linux and xawtv reports libv4l2 errors. This happens when powered from the Pi and when powered from a Pluscom USB Hub. Arch was updated on 17th July 2012<br />
<br />
== USB GPS devices ==<br />
*Royaltek<br />
**Royaltek RGM 2000 SiRF2 using the included serial (TTL) to USB - converter. That uses a Profilic pl2303-chip so you'll need to compile the module or the kernel manually<br />
*Garmin<br />
**Garmin eTrex Vista HCx: Works but may draw much power. To get it working (software part): https://wiki.openstreetmap.org/wiki/USB_Garmin_on_GNU/Linux<br />
*GlobalSat<br />
**GlobalSat BU-353 Does not require a powered hub, works fine when directly plugged into the RPi. On Raspian, requires the gpsd and gpsd-client packages. For some reason, the gpsd daemon does not always start correctly on boot. You may need to do something like the following to manually restart it:<br /><pre>sudo killall gpsd; sudo gpsd /dev/ttyUSB0 -F /var/run/gpsd.sock</pre><br />
<br />
*Wintec<br />
**WBT-200: No problem on Debian<br />
*Holux<br />
**Holux M-215: Works fine on Arch, uses Silicon Labs CP210x RS232 serial adaptor driver<br />
*Bluenext<br />
**Bluenext BN903S: No problem on Debian image (19-04-2012).<br />
<br />
== USB UART adapters ==<br />
The USB UART adapter is used to access the serial console of the Raspberry Pi from a development host such as a laptop or desktop PC. The USB end connects to the PC and the UART header end connects to the USB. While it is possible to connect the USB end to another Raspberry Pi, this configuration has not been tested unless explicitly mentioned against an individual entry below.<br />
<br />
*'''FTDI'''<br />
**FT232 chip based adapters works for some people but others find it hangs Linux when the port is opened. module is ftdi_sio<br />
<br />
** FT2232D dual RS232/FIFO works (used in various JTAG devices)<br />
<br />
*Prolific<br />
**PL2303 chip based adaptors works fine on latest Debian tested with minicom and gtkterm<br />
<br />
== Other, exotic USB devices ==<br />
=== CAN Bus ===<br />
*PEAK-System (www.peak-system.com)<br />
**PCAN-USB using the driver (kernel module) from http://www.peak-system.com/fileadmin/media/linux/index.htm<br />
=== Home automation ===<br />
*Tellstick (www.telldus.com), installation [[R-Pi_Tellstick_core|instructions]]<br />
**Depends on libftdi1<br />
<br />
=== Touch Screen ===<br />
*ACER T230H touch screen [http://support.acer.com/acerpanam/monitor/2009/acer/t230h/t230hnv.shtml]<br />
**USB TS identifies as "Quanta Computer, Inc. Optical dual-touch panel", module hid_quanta<br />
**Seems to draw over 200 mA from USB!<br />
=== Floppy Disk Drive ===<br />
*Samsung USB Floppy Drive SFD-321U/HP<br />
**I suppose a floppy drive might be considered exotic nowadays!<br />
**LSUSB lists it as Samsung Electro-Mechanics Co. Floppy Disk Drive<br />
**Only tried connected to a powered USB hub, as the drive is labelled 5V at 0.5A on a Raspberry Pi running Debian Wheezy.<br />
**tail -f /var/log/syslog looking for mount device when plugged in, came up as SDA in testing.<br />
**sudo mkdir /media/floppy<br />
**sudo mount /dev/sda /media/floppy<br />
**Contents of floppy now available in /media/floppy<br />
**To remove drive, ensure no sessions have the floppy directory as the current working directory.<br />
**sudo umount /media/floppy<br />
=== USB Missile Launcher ===<br />
*USB Missile Launcher / Rocket Launcher sold in UK by Marks and Spencer but also sold under a range of other names.<br />
**USB ID 1130:0202 Tenx Technology, Inc. Use apt-get install pymissile (python code) and there is C code at [http://sourceforge.net/projects/usbmissile/ usbmissile from Source Forge]<br />
=== USB Docking Stations ===<br />
*StarTech USB 3.0 to Dual 2.5"/3.5" SATA HDD Dock (SATDOCK2U3GB)<br />
**This is an externally powered dual sata HDD docking station, which has USB2.0 compatibility with the Pi. <br />
**Tested with latest raspbmc and debian wheezy raspbian, 3.1.9+ #168<br />
=== USB RFID Reader ===<br />
*Unbranded 125KHz EM4100 RFID reader from eBay sellers (< £7), the one with a Windows logo on (easily scratches off for Linux users).<br />
**Initially would not work when plugged in directly to RPi. Worked when connected via an unpowered Trust hub. Worked after RPi was modified with 10K resistors over the USB polyfuses (warranty invalidated). Probably would work fine with powered hub.<br />
**Sends a 10 digit string to current window or console as if it was a keyboard. Can be captured independently of keyboard using Linux event interface (/dev/input) but kernel in current distributions does not have CONFIG_INPUT_EVDEV selected so kernel rebuild is necessary.<br />
=== JTAG ===<br />
* FTDI2232D dual RS232/FIFO based JTAG (e.g. SheevaPlug JTAGKey USB-ID 9e88:9e8f)<br />
** works using the RPi as a development host<br />
<br />
== PS2 / AT to USB Converters ==<br />
<br />
* Unbranded active converter known as the "blue cube". Based on the Cypress CY7C63723C 8 bit RISC. Please see http://geekhack.org/showwiki.php?title=PS2-to-USB+adapters for more information.<br />
Note that although the adapter might work, PS/2 keyboards were not designed to be low power USB devices, so they might not meet the requirement to work with considerable lowered supply voltage (4.4 volt) provided by the USB ports of the raspberry PI. These keyboards should work when powered by a powered hub. <br />
<br />
'''Tested PS2/AT keybords'''<br />
<br />
All above tested with the famous "blue cube" on a powered USB hub.<br />
<br />
*IBM Model F (please note requires an additional AT to PS2 converter)<br />
*Dell AT101w<br />
*Northgate Ominikey Ultra T (please note requires an aditonal AT to PS2 converter)<br />
<br />
* 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller<br />
** Working: Ipex RT215KTW PS/2 keyboard<br />
** Not working: HP SK-2502 PS/2 keyboard (gets power but does not init - three LEDs remain permanently lit. Keyboard + Holtek converter work on a Linux PC, although this keyboard doesn't work with some native PS/2 ports.)<br />
<br />
== Power adapters ==<br />
The Raspberry Pi uses a standard Micro USB (type B) power connector, which runs at 5v. Generally you can use a MicroUSB to USB cable and then either power the Raspberry Pi directly from your main computers USB ports (if they provide enough power), or by using a USB to Mains adaptor. A number of mobile phones use MicroUSB power cables, and these are compatible with the Raspberry Pi in most cases. Below is a list of power adaptors known to work.<br />
<br />
===Working power Adapters===<br />
* '''AlcaPower'''<br />
** 5V 2.5A Model AP5A - Charger/switching with 7 connectors(also Microusb)<br />
* '''Ansmann'''<br />
*** Dual USB charger slim, Model-Nr. 1201-0001<br />
* '''Apple'''<br />
** 5V 2.1A USB charger for iPad2, model A1357<br />
** 5V 1.0A USB Charger for iPod<br />
** 5V 1.0A USB Charger for iPhone 4<br />
* '''Amazon'''<br />
** 5V 0.85A USB charger for Kindle<br />
** 5V 2A Mains to USB A adaptor, Branded "CostMad" <br />
* '''Asus'''<br />
** 5V 2.0A USB charger for Google Nexus 7<br />
* '''Belkin'''<br />
** 5V 2.6A 4 port Ultra-Slim Desktop hub (Model F4U040) (RPi running from USB Hub port)<br />
** 5V 2.5A 4 port USB Hub (Model F5U404) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB 2.0 Mobile Powered Hub (Model F4U018) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB Hub (Model F5U706) (RPi running from USB Hub port)<br />
** Mini Surge Protector Dual USB Charger (Model BZ103050-TVL)<br />
** Universal USB Wall Charger (5V 1A) (Model F8Z222uk)<br />
* '''Blackberry'''<br />
** Charger for Pearl Flip 8220, Bold 9600 (B)<br />
** Charger for Tour 9630<br />
** 5V 0.7A Model PSM04R-0500CHW1(M), RIM Part Number HDW-17957-003 (B)<br />
** 5v 750mA Model RIM-C-0004aDUUUC-001, RIM Part Number HWD-24481-001 (comes with Blackberry 9300)<br />
** 5v 750mA Model RIM-C-0004ADUUS-001 035D, Single port plug. (Tested with USB B to Micro USB cable from Logitech H760 Headset)<br />
** 5V 2A Model PSAC10R-050QT, RIM Part Number HDW-34725-001<br />
* '''Dell'''<br />
** USB Hub integrated in Dell monitors (B)<br />
* '''Garmin'''<br />
** 5V 1A charger (Model: PSA105R-050Q) supplied with Garmin Edge 800 GPS. Requires a USB-A to MicroUSB-B cable. Belkin 6ft cable (F3U151B06) works.<br />
* '''Griffin'''<br />
** Power Block Model P2417. 5V 2.1A<br />
** Power Block Model P1190R2 Two USB 5V Outputs, 1Amp each<br />
* '''Hama'''<br />
** 1000mA Travel Charger for Micro USB universal (barcode nr: 4 007249 935854)<br />
* '''HP'''<br />
** 5.3V 2A Charger for HP Touchpad (B)<br />
* '''HTC'''<br />
** 5V 1A TCP-300 USB phone charger (B)<br />
** 5V 1A TC B250 USB charger (HTC R/N: 79H00096-00M)<br />
** 5V 1A TC E250 USB charger (HTC R/N: 79H00098-02M)<br />
* '''i-box (Philex Electronic Ltd)'''<br />
** 5V 1A USB charger, 1 USB socket, no USB lead supplied, Model: 76971HS/02 (available from ASDA and others in the UK) (B).<br />
* '''IDAPT'''<br />
** [http://www.idaptweb.com/universal_chargers/i4/ i4 multi device charger] - 3 interchangeable device tips + USB A socket ([https://twitter.com/andrewmk/status/226057302879375361 see it in use])<br />
* '''Innergie'''<br />
**15W Dual USB Adapter. Model: mMini AC15. Output: 5V, 3A (max per port), 15W max. [http://www.myinnergie.com/DuoPowerKit/specification.aspx Spec Sheet]<br />
* '''Kodak'''<br />
** 5V 1A TESA5G1-0501200<br />
** 5V 1.0A K20-AM<br />
* '''LG'''<br />
** 4.8V 1A Travel Adapter<br />
**5.1V 0.7A Travel Adapter (Model: STA-U34WVI)<br />
**5.1V 0.7A Travel Adapter (Model: STA-U12ER)<br />
* '''Logic'''<br />
** 4 port USB Hub (Model LP4HUB10). (RPi running from USB Hub port, red power line (+5v) inside hub cut) (B)<br />
*'''LogiLink'''<br />
**5V 2.1A Switching power supply, model PA0040 (B)<br />
* '''Logitech'''<br />
** 5V 1A SDC115-USB Remote Control Charger and cable<br />
* '''Maplin Electronics'''<br />
** 5V 1A dual USB power supply, model number H25B-MT-K2<br />
** Micro USB Power Supply N19HX<br />
* '''Medion'''<br />
** 5V 1A USB power supply for OYO ebook reader<br />
* '''Microsoft'''<br />
*** Zune Zune AC Adapter v2 <br />
* '''Motorola'''<br />
** [http://www.amazon.com/Motorola-Micro-USB-Home-Travel-Charger/dp/B004EYSKM8/ 5V 0.85A SPN5504 Charger with Cable]<br />
* '''Nokia'''<br />
** 5V 1.2A AC-10E Charger<br />
** [http://accessories.nokia.com/products/nokia-fast-usb-charger-ac-16/ 5V 1A AC-16E Charger]<br />
* '''Noname'''<br />
** 5V 2.1A KMS-AC09 4 port USB charger (B) [http://www.miniinthebox.com/kms-ac09-universal-ac-adapter-for-ipad-ipad-2-iphone-white_p208568.html]<br />
** 5.2V 1A MW-3NU10GT - no cable, but this one works well (1m): [http://www.amazon.de/gp/product/B005L8VELA]<br />
** 5V 1A Model H-IP008 Serial No. H10T80L068<br />
* '''Novatel Wireless'''<br />
** 5V 1.05A Charger, model number SSW-1811, packaged with Verizon Wireless MiFi device<br />
* '''Orange'''<br />
** 5V 0.7A Charger for Orange San Francisco<br />
* '''Palm'''<br />
** 5V 1A Charger for Palm Pixi+ (B)<br />
* '''Pantech'''<br />
** 5.0V 1A CNR USB with LG DLC100 micro usb cable<br />
* '''Phihong'''<br />
** Switching Power Supply. Model: PSAC09R-050. Output: 5V, 1.8A, microUSB. [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]<br />
* '''PortaPow'''<br />
** PortaPow UK Mains Wall Power Supply<br />
* '''RS Components'<br />
** HNP06UK (RS 7263069) Switching Adapter 5.0V 1200mA<br />
* '''Samsung'''<br />
** 5V 0.7A Charger for Galaxy S model ETA0U10EBE<br />
** 5V 0.7A Charger for Galaxy SII<br />
** 5V 1A Charger for Galaxy Nexus<br />
** 5V 0.7A Charger for Galaxy S Vibrant (SGH-T959)<br />
** 5V 0.7A Travel Adapter model ATADU10EBE<br />
** 5V 1A? Samsung C Series TV USB-port for external HDDs. Running stable with openelec<br />
** 5v ?A(Unknown) Samsung Service Port (USB) on LN32A330J1DXZA 720p 32 inch HDTV <br />
** 5V Unknown Ampere Samsung UA22D5000 & UA32D5000 TV USB Port. Test with Raspbian Wheezy, Raspbmc, and RPITC<br />
* '''Shun Shing'''<br />
** 100-240VAC to 5VDC 1A USB power supply, model SP5Q-AU [http://jaycar.co.nz/productView.asp?ID=MP3455 Jaycar]<br />
* '''Sony Ericsson'''<br />
** 5V 0.7A Charger CST-80<br />
* '''Travel Charger'''<br />
** 5V 2.0A USB Power Adapter, [http://www.amazon.co.uk/gp/product/B0065JCIPU/ Amazon Link]<br />
* '''Technika'''<br />
** 5V 1A USB Power Adapter, model MPASS01 (B)<br />
* '''The Pi Hut'''<br />
** Micro USB Power Supply for the Raspberry Pi. 5V 1000mA (from [http://thepihut.com/products/micro-usb-power-supply-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store]) (also from [http://www.ebay.co.uk/itm/330757401271 eBay ])<br />
* '''Trisonic'''<br />
** TS-CP600T - MICRO USB HOME & TRAVEL CHARGER (5V, 800mA) $3 at Daiso U.S. stores.<br />
* '''TruePower'''<br />
** [http://u-socket.com/ U-Socket] 5V 2.1A AC Receptacle with Built-in USB ports (2.1A per USB port) model ACE-7169<br />
* '''Voltcraft'''<br />
** SPS5-12W, 2500 mA, requires additional USB <-> miniUSB adapter/cable, works perfectly (bought from [http://www.conrad.de/ce/de/product/512660/VOLTCRAFT-SPS5-12W-Steckernetzteil-Steckernetzgeraet-5-VDC-2500-mA-12-Watt Conrad Shop])<br />
<br />
===Problem power Adapters===<br />
* '''Masterplug'''<br />
** Masterplug Surge Protected USB Adaptor 2 x 1A USB Polished Black - USB ports and ethernet don't work with this adapter and some screen artefacts using HDMI.<br />
* '''Monoprice'''<br />
** 5v, 2A 3 Outlet Power Surge Protector Wall Tap w/ 2 Built-In USB Charger - some display artifacts, sometimes unable to find mouse, some failures to boot. Measured less than 4.75v between TP1 and TP2 when used with a Monoprice cable.<br />
* '''Sony Ericsson'''<br />
** 5v, 850mA EP800. Some failures to boot , ethernet loops at boot.<br />
<br />
===External Battery packs (with 5V regulated output)===<br />
* '''Anker Astro3'''<br />
** Anker Astro3 10000mAh with Dual 2A USB Output<br />
* '''Duracell'''<br />
** PPS2 Instant USB Charger<br />
* '''Energizer/XPAL'''<br />
** XP18000 18000mAh Power Pack<br />
* '''Generic - eBay no brand'''<br />
** 6000T Pocket Power 5000mAh - eBay item 271009959140<br />
** Power Bank for iPad/iPhone 5000mAh (looks the same as a New Trent IMP50D or TeckNet iEP380) - eBay item 280914455938<br />
* '''New Trent'''<br />
** iCurve IMP70D 7000mAh (Approx 12hrs from full charge)<br />
** IMP120D 12000mAh<br />
* '''Sinoele'''<br />
** Movpower - Power Bank 5200mAh (8hrs with Wifi active)<br />
* '''TeckNet'''<br />
** iEP387 Dual-Port 7000mAh External Power Bank (The charging lead can be used to connect the Tecknet to the RPi. Ran the RPi with wifi dongle and wireless keyboard receiver for over 9 hours of light use.)<br />
** iEP392 Dual-Port 12000mAh External Power Bank (1A port, ~16.5 hours)<br />
** Rayovac PS60 5v 800mAh<br />
* '''VINZO'''<br />
** Power Bank 5000mAh Grey Output 5V 1000mA<br />
* '''Kodak Power Pack KP1000'''<br />
** 1A USB rechargeable battery pack - see [http://blog.sheasilverman.com/2012/09/its-alive/ Shea Silverman's blog]<br />
<br />
== Display adapters ==<br />
Note that active converter boxes may draw power through the HDMI port, and thus will put an extra load on your PSU, and also increase the current running through the PI's primary input fuse. HDMI ports (and the raspberry PI) are designed so that they deliver a very limited amount of power (50mA) to the TV/Monitor/display-adapter and much more isn't in theory allowed. In fact there is a diode (D1) in series with the power line which can only handle 200mA, if the adapter tries to draw much more than that the diode might fail. Therefore only externally powered adapters are to be recommended. Despite this, many people report success with these high powered devices.<br />
<br />
===HDMI->DVI-D===<br />
There are three kinds of DVI. There is DVI-D, a digital signal fully compatible with HDMI, so a passive cable can be used. There is DVI-I, which is a connector with both analog pins and digital pins. An HDMI to DVI-D adapter fits in a DVI-I female connector. Finally, there is DVI-A. This a fairly rare connection, but occasionally it will be found on some monitors and is an analog interface, in fact the same as VGA!<br />
<br />
Some adapters like Farnell part AK-CBHD03-BK are HDMI to DVI-I, which, while not fitting in a DVI-D monitor, are still compatible. The analog pins simply must be bent.<br />
<br />
The HDMI to DVI-D cable provided by Apple with the 2010 Mac Mini worked. It does not appear this adapter can be purchased separately.<br />
<br />
* AmazonBasics HDMI to DVI Adapter Cable (model SK231) works and is inexpensive.<br />
* [http://www.ebay.com/itm/DVI-Female-to-HDMI-Male-Adapter-Converter-Adaptor-Gold-for-HDTV-Full-HD-/320946033059?pt=US_Video_Cables_Adapters&hash=item4ab9dfd1a3 A generic HDMI-to-DVI converter from eBay]. Works well, but it's probably the cause of some power loss between the RPi and the monitor, causing [http://elinux.org/R-Pi_Troubleshooting#Interference_visible_on_a_HDMI_or_DVI_monitor this] problem. A setting of config_hdmi_boost='''5''' in /etc/boot solved this. Note that config_hdmi_boost='''4''', as suggested in the troubleshooting guide, helped but did not solve the problem completely.<br />
<br />
===HDMI->VGA converter boxes===<br />
Most will require use [[RPi_config.txt]]. Start off with hdmi_safe=1.<br />
<br />
[http://www.element14.com/community/groups/raspberry-pi/blog/2012/08/16/raspberry-pi-hdmi-to-vga-converter Sanoxy HDMI to VGA converter], $27 from Amazon, no changes required with official Raspbian Wheezy image (2012-Jul-15), note: had already disabled overscan previously<br />
<br />
http://www.amazon.co.uk/gp/product/B007KEIRNG -- "Neewer" HDMI to VGA -- some issues discussed below:<br />
However, according to user "Tom1989" the same Neewer HDMI to VGA adapter burned out BAT54 Schottky diode D1 on the RasPi and broke its HDMI output: [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9819 Serious HDMI Problems. What's that smell? Burning Raspberry!]. On that thread, "mahjongg" suggested the NXP (or equivalent) PMEG2010AET as a high-current replacement for D1. The PMEG2010AET has 1A max forward current, much greater than the BAT54's 200 mA limit which may be exceeded by your HDMI -> VGA converter. Remember that the converter's current must come from your RasPi power supply and go through the Micro USB cable and polyfuse F3, so you may get extra voltage drops and/or cause F3 to trip depending on how much current the converter uses. As always with board modifications, YMMV. Also on the "Burning Raspberry!" thread, user "pwinwood" reported the Neewer's current to be 400 mA, which is twice the limit of BAT54 diode D1. "pwinwood" also took the Neewer apart and added its own +5V connection adapted from a USB cable, which bypasses RasPi's Micro USB cable and polyfuse F3.<br />
<br />
http://www.amazon.co.uk/KanaaN-Adapter-Converter-Cable-Resolutions/dp/B007QT0NNW -- "Kanaan" HDMI-VGA<br />
<br />
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130699741793 -- eBay is swarming with $16 converters all like this one.<br />
<br />
This adapter -- http://www.ebay.co.uk/itm/300692770623 -- works from 640x480 up to 1920x1080, audio over HDMI works too.<br />
Sadly the IC's on the PCB have all been scrubbed.<br />
Requires HDMI boost and overscan, [[RPi_config.txt|config.txt]] settings for 640x480@60Hz:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=4<br />
<br>config_hdmi_boost=4<br />
<br>overscan_top=-30<br />
<br>overscan_bottom=-30<br />
<br>overscan_left=-30<br />
<br>overscan_right=-30<br />
<br />
According to user "Mortimer" -- HDFuryPro HDMI to YPbBr/VGA Converter found on Amazon -- http://www.amazon.co.uk/Inputs-Component-Video-YPbPr-Converter/dp/B00797ZZ4S/ -- Works with Raspberry Pi. Tested against a Philips 170B 1280x1024 LCD monitor, producing a full native resolution image. Not tested against a Component Video TV yet, and audio has yet to be got working.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
<br />
According to user "Mortimer" -- HDFury1 1080p HDMI to VGA Converter from HDFury.com. I'm not sure the HDFury1 can be got a hold of easily nowadays, I happened to have access to one to try out. HDFury2, 3 and 4 are available as far as I can tell, but are very pricey compared to alternatives. HDFury1 was around £80 when we bought one for a project at work. HDFury2 seems to be around £130, 3 and 4 are getting on towards £200 or more. So not to be recommended as a solution unless you happen to have one lying around. I don't believe there is any relationship between the company that produces these and the HDFuryPro I bought for myself (See above). I didn't alter any config settings, just plugged it in. It doesn't work without having its external power supply connected, as it requires 0.4A, which is too much draw for the 5V supply available from the HDMI socket on the Raspberry Pi. Its power LED lights, but no picture is produced. In comparison to the HDFuryPro this picture from this device is sharper, but not enough to justify the extra cost.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
http://www.amazon.co.uk/gp/product/B007SM7O2U/ref=oh_details_o02_s00_i00 - "Cable Matters"<br />
<br />
Here It is another option: http://www.dealextreme.com/p/hdmi-v1-4-male-to-vga-female-converter-adapter-cable-white-15cm-130458, is cheap (it's free shipping from china) and works perfectly, I tested it with an Acer VGA monitor (AL1511), without no change in my XBMC distribution.<br />
The config.txt for Raspbian (Flatron VGA monitor 1024 * 768):<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=16<br />
<br>hdmi_force_hotplug=1<br />
<br>disable_overscan=0<br />
<br />
<br />
And another one: http://cgi.ebay.pl/ws/eBayISAPI.dll?ViewItem&item=251086464644. Very cheap but works perfectly. No config.txt changes was needed at all. I've booted Raspbian and OpenELEC. Monitor is detected correctly and the optimal resolution is set (Raspbian) or you can change the res in the menu (OpenELEC). <br />
The /opt/vc/bin/tvservice is able to read monitor edid data. I tested the adapter using NEC 72VM 15" LCD. (1280x1024 60Hz, 1024x768 60Hz, 640x480 works) The adapter is based on Lontium LT8511A chip, but I was unable to get the spec for it.<br />
The D1 diode is getting very hot though. Most likely the adapter drives more than 200mA. The standard RS Components 1,2A usb power supply is able to provide enough power for the RPi and the adapter. I'll try to modify the adapter to connect external power to bypass D1.<br />
Marcin.<br />
<br />
===DVI-D -> VGA active adapters===<br />
None are currently listed<br />
<br />
===Composite->SCART===<br />
SCART adapters (SCART plugs with three RCA connectors in the back), will probably work when used with the yellow RCA plug connected to the R-PI's RCA video output. Additionally using a splitter cable (3.5mm jack plug on one end, and red-white RCA plugs on the other end) will probably work when plugged into the red and white (left and right audio channels) of the SCART adapter.<br />
<br />
* Generic - works<br />
<br />
===Composite->VGA converter boxes===<br />
* [http://www.extron.com/product/product.aspx?id=dvs204| Extron DVS-204] - works no problem!<br />
<br />
== SD cards ==<br />
<br />
Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)<br />
For this reason, please specify product numbers in the lists below, when possible.<br />
<br />
You can also attach the following fields from your card's CID :<br />
<pre><br />
cd /sys/class/mmc_host/mmc?/mmc?:*<br />
echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"<br />
</pre><br />
<br />
please merge with http://elinux.org/RPi_Performance#SD_card<br />
<br />
===Preinstalled SD Cards===<br />
Sandisk SD Cards Preinstalled with the latest Raspbian operating system are available from [http://thepihut.com The Pi Hut's Raspberry Pi Store].<br />
* '''SanDisk''' <br />
** [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
<br />
===Working SD Cards===<br />
* '''7DAYSHOP.COM''' <br />
** 8GB Professional SDHC Class 10 (man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0)<br />
* '''Adata''' <br />
** 2GB SD Class 2 Speedy (8B0947 printed on back) This card works with every distro I tried. May be old, may not be the fastest, but is very stable.<br />
** 4GB SDHC Class 4 (BH1109416141G)<br />
** 8GB SDHC Class 2 (MMB3F08GWMCA-GE)<br />
** 8GB SDHC Class 4 (MicroSD w/ adapter)<br />
** 8GB SDHC Class 6 (MMAGR08GUDCA-DB)<br />
** 8GB SDHC Class 10 (AUSDH8GCL10-R)<br />
** 8GB SDHC Class 10 (ASDH8GCL10-R) Tested on 2012-06-18-wheezy-beta.zip<br />
** 8GB SDHC Class 10 (P-SDH8G10-EC from BJ's USA tested on Raspbian)<br />
** 16GB SDHC Class 6<br />
** 16GB SDHC Class 10 (16GSDHC10)<br />
** 16GB SDHC Class 10 (microSD w/ adapter AUSDH16GCL10-RA1)<br />
** 32GB SDHC Class 10 (ASDH32GCL10-R) Tested on wheezy-beta with latest kernel and firmware and raspbian wheezy<br />
* '''AmazonBasics'''<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH0LS 8GB SDHC Class 10 B0058GH0LS]<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH1IK 16GB SDHC Class 10 B0058GH1IK]<br />
** 32GB SDHC Class 10<br />
* '''Apacer'''<br />
** 8GB microSDHC Class 10 (with adapter)<br />
** 8GB SDHC Class 6<br />
* '''Centon'''<br />
** 16GB SDHC Class 4 (1447 printed on back)<br />
* '''CnMemory'''<br />
** 8GB SDHC Class 4 (Silver/Black label says 'High Capacity Card') 84209_8GB_SDHC, bought from Maplins. No error messages seen, but operation is much slower than with a SanDisk 4GB Class 4 card.<br />
* '''Dane-Elec''' <br />
** 16GB SDHC Class 4<br />
** 16GB Pro 200X Class 10 DEMS16GB2683ENBA<br />
* '''Dikom'''<br />
** 16GB SDHC Class 10 (serial 207H3MD016IBSD)<br />
* '''Duracell'''<br />
** 4GB SDHC Class 4<br />
** 16GB SDHC Class 10 (labelled Pro Photo 200x)<br />
** 32GB SDHC Class 10 (man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0) (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012, following [[RPi_Performance#SD_card]])<br />
* '''Emtec''' <br />
** 2GB SD man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0<br />
** 4GB SDHC Class 4 (EKMSD4G60XHCN)<br />
** 16GB SDHC Class 10 (EKMSD16G150XHC) (less than half as fast as Sandisk 16gb Class 10)<br />
* '''Extrememory''' <br />
** 16GB SDHC Class 10 (man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0)<br />
** 32GB SDHC Class 10 (man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0)<br />
* '''Eye-Fi'''<br />
** 4GB WiFi SDHC (Wi-Fi doesn't work)<br />
* '''Fugi''' <br />
** 32GB SDHC Class 10 (P10NM00580A) (man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0)<br />
* '''Hama''' <br />
** 2GB SD Class 2<br />
** 8GB SDHC High Speed Pro Class 6<br />
* '''Hema (Dutch dept. store)'''<br />
** 4GB<br />
** 8GB SDHC Class 4<br />
* '''Goodram''' <br />
** 8GB microSDHC Class 4<br />
** 16GB microSDHC Class 4 (SDU16GHCAGRR10)<br />
** 16GB SDHC Class 10<br />
* '''HP'''<br />
** 8GB SDHC Class 4 (doesn't reboot during first time startup process, but restart again and fine after that).<br />
** [http://www.amazon.com/HP-CG790A-AZ-Flash-Memory-Class/dp/B007X7U224 32GB SDHC Class 10] <br />
* '''ICIDU'''<br />
** 4GB SDHC Class 10 (also had no issues)<br />
** 16GB SDHC Class 10 (image write had issues, might be my inexperience. It boots & shows Xserver)<br />
** 32GB SDHC Class 10 (had no issues whatsoever, the comment above might be a dud.)<br />
** 8GB microSDHC Class 10<br />
** 16GB microSDHC Class 10 (20MB/sec)<br />
** 32GB microSDHC Class 10 (20MB/sec)<br />
* '''Integral''' <br />
** 4GB SDHC Ultima Pro Class 10<br />
** 4GB SDHC Class 4 SD-K04G (Purple label)<br />
** 8GB SDHC Ultima Pro Class 6 (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 8GB SDHC Ultima Pro Class 10 (20MB/s) (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 16GB SDHC Ultima Pro Class 6<br />
** [http://www.amazon.co.uk/gp/product/B0047T6XME 16GB SDHC Class 10 Ultima Pro (20MB/s)]<br />
** 32GB SDHC Ultima Pro Class 10 (20MB/s) - Slow to initially boot past the Rainbow Screen.<br />
* '''Joyflash''' <br />
** 16GB SDHC Class 10 (LTSD1112016GB)<br />
* '''Kingmax''' <br />
** 4GB SDHC Class 2<br />
** 4GB microSDHC Class 4 (KM04GMCSDHC4) won`t reboot when it`s hot<br />
** 8GB microSDHC Class 4 (KM08GMCSDHC41A) won`t reboot when it`s hot<br />
* '''Kingston''' <br />
** 2GB SD<br />
** 2GB microSD (N0185-002.A00LF) + Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510)<br />
** 4GB microSD Class 4<br />
** 4GB SDHC Class 4 (SD4/4GB)<br />
** 4GB SDHC Class 10 (SD10V/4GB)<br />
** [http://img341.imageshack.us/img341/1619/dsc0253y.jpg 8GB SDHC Class 4] ([http://img833.imageshack.us/img833/2028/dsc0254br.jpg SD4/8GB]) (does not work with current build of raspbmc)<br />
** [http://img600.imageshack.us/img600/3849/dsc0251et.jpg 8GB microSDHC Class 4] ([http://img707.imageshack.us/img707/363/dsc0252ld.jpg SDC4/8GB])<br />
** 8GB SDHC Class 6 (SD6/8GB) (errors on boot, boots Debian ok, does not work with raspbmc rc2)<br />
** 8GB SDHC Class 10 (SD10G2/8GB, SD10V/8GB, ultimateX 100X, ultimateX 120X)<br />
** 16GB SDHC Class 4 (SD4/16GB)<br />
** 16GB microSDHC Class 10 (SDC10/16GB)<br />
** 16GB SDHC Class 10 (SD10G2/16GB, ultimateX 100X)<br />
** 16GB SDHC Class 10 (SD4/16GBET)<br />
** 32GB SDHC Class 10 (SD10V)<br />
** 32GB SDHC Class 10 (SD10G2/32GB, ultimateX 100X)<br />
* '''Kodak''' <br />
** 4GB SDHC Class 2<br />
** 8GB SDHC Class 4<br />
* '''Kruidvat''' <br />
** 8GB SDHC Class 4<br />
* '''Lexar''' <br />
** 4GB SDHC Class 4 (Boots consistently and no error messages in log after 1/2 hour use ) (works with Raspbmc)<br />
** 4GB SDHC Class 6 Platinum II (from [http://www.microcenter.com/single_product_results.phtml?product_id=0350735 Microcenter])<br />
** 8GB SDHC Class 4<br />
** 8GB SDHC Class 6 Premium Series<br />
** 8GB SDHC Class 6 Platinum II<br />
** 16GB SDHC Class 6 Platinum II<br />
** 32GB microSDHC HIGH-SPEED Class 10 (from [http://www.amazon.co.uk/Lexar-32GB-Micro-Speed-Reader/dp/B004BR2ZTM Amazon])<br />
** 128GB SDXC UHS-I Card LSD128CTBNA400 (from [http://www.amazon.com/gp/product/B007BZRXK2 Amazon])<br />
* '''Master'''<br />
** 16GB SDHC Class 10 [man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0]<br />
* '''Medion'''<br />
** 8GB Class 4 SDHC UK sourced (Aldi)<br />
* '''Microcenter Brand (sold in bins at checkout)'''<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0289508 8GB SDHC Class 4]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349728 8GB SDHC Class 10]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349729 16GB SDHC Class 10]<br />
* '''Mushkin'''<br />
** 16GB SDHC Class 10 (MKNSDHCU1-16GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226324]<br />
** 32GB SDHC Class 10 (MKNSDHCC10-32GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226235]<br />
* '''Mustang'''<br />
** [http://www.mustang-flash.de/Products/Flash%20Products/Secure%20Digital/SD-Card/8GB%20Mustang%20SDHC%20Card%20LeMans%2C%20Class%2010%2C%20Retail|SD8GHCCL10MU-R.html 8GB SDHC Class 10]<br />
* '''MyMemory''' <br />
** 8GB SDHC Class 10 (MYMESDH8G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-8GB-SD-Card-%28SDHC%29---Class-10 MyMemory 8GB class 10] (Latest batch not working)<br />
** 16GB SDHC Class 10 (MYMESDH16G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-16GB-SD-Card-(SDHC)---Class-10]<br />
* '''NovaTech'''<br />
** 8GB SDHC Class 10 (Integral Branded)<br />
* '''OCZ'''<br />
** 8GB SDHC Class 6 Gold Series (08110596-8GB-6) tested with Debian Squeeze (official Raspberry Pi distribution debian6-19-04-2012.zip)<br />
* '''Optima'''<br />
** 8GB SDHC Class 10 (Pro-Speed)<br />
** 8GB SDHC Class 4 - working from 2012-09-18<br />
* '''Panasonic''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 10 UHS-I (~11.2MB/s read, ~6.2MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 2 (~11.1MB/s read, ~9.7MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (~4.8MB/s read, ~4.4MB/s write, following [[RPi_Performance#SD_card]])<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PSF8GSDHC10-PC)<br />
** 8GB SDHC Class 10 LX Series (PSF8GSDHC10-PC1)<br />
** 16GB SDHC Class 10 (PSF16GMCSDHC10)<br />
** 16GB SDHC Class 10 LX Series (PSF16GSDHC10) (19.3MB/s read, 9.3MB/s write)<br />
** 16GB microSDHC Class 10 (PSF16GMSHC10) (requires recent kernel update for boot)<br />
** 32GB SDHC Class 10 (PSF32GSDHC10)<br />
** 32GB SDHC Class 10 UHS-1 (PEF32GSDHC10U1) (20.4MB/s read, 12.1MB/s write)<br />
* '''Peak''' <br />
** 4GB microSDHC Class 4 (MMBTR04GUBCA-ME) tested with Arch<br />
* '''Philips'''<br />
** 8GB SDHC Class 4 (FM08SD35B)<br />
* '''Platinum'''<br />
** 4GB SDHC Class 6<br />
** 8GB SDHC Class 6 (man:0x00006f oem:0x0000 name:SMI hwrev:0x1 fwrev:0x0)<br />
** 64GB SDCX Class 10<br />
* '''Play.com''' <br />
** 4GB SDHC Class 6 (S4E3CD04GEFAA 0907090121106)<br />
* '''PNY''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 4 Optima (SD-K04G 0834TT1297Y)<br />
** 4GB SDHC Class 4. Micro SD Card with adapter.<br />
** 8GB SDHC Class 6<br />
** 8GB SDHC Class 10. Micro SD card with adapter.<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 10 (P-SDHC16G10-GE)<br />
*** See the note for P-SDHC16G10-EF. Works with Wheezy, does not work with Squeeze, Arch, or Fedora Remix. <br />
** 16GB SDHC Class 10 (P-SDHC16G10-EF) <br />
*** Works with [http://www.raspberrypi.org/archives/1435 Debian Wheezy]<br />
*** Does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
*** Does not work with Arch Linux Arm (archlinuxarm-29-04-2012: no video is displayed, solid red power light, tiny green light)<br />
** 16GB SDHC Class 10 Pro-Elite (P-SDH16U1-30-GE). Works with raspbmc, haven't tested others.<br />
* '''pqi'''<br />
** 8GB SDHC Class 6 <br />
*** Works with official debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 (8DK52-122ME)<br />
* '''Samsung''' <br />
** 4GB SDHC<br />
** 8GB SDHC Class 6 (MB-SS8GAEU)<br />
** 8GB SDHC Class 10 (MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM)<br />
** 16GB SDHC Class 6 (MB-SSAGAEU)<br />
** 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy], but does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
* '''SanDisk''' <br />
** 2GB SD, white "SanDisk for Wii" branded, no class mentioned<br />
** 2GB SD (with a circle 2 --probably class 2), writes at 3.5 Mb/s<br />
** 2GB SD Class 2 (BE0816113150D)<br />
** 2GB SD Class 4 Ultra (15MB/s)<br />
** 2GB SD Class 4 Ultra II<br />
** 2GB SD Ultra II (BE0719111366D)<br />
** 2GB SD Extreme III (BE0715105083B)<br />
** 2GB SD Extreme III (BE0804212046D) - 20MB/s - Class 6<br />
** 4GB SDHC Class 2 (BH0820113475D) - Tested with RPITC (Based on Raspbian Wheezy)<br />
** 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 4GB SDHC Class 4 (SDSDB-004G-B35)<br />
** 4GB SDHC Class 4 (SDSDB-004G-BT35). Confirmed working with stock debian6-19-04-2012.img<br />
** 4GB SDHC Class 4 (BH1210821913G)<br />
** 4GB SDHC Class 4 (SDSDH2-004G-AC11, BH1127216239D) Costco 2-pack, booting Wheezy 2012-07-15<br />
** 4GB SDHC Class 4 Ultra (SDSDH-004G-U46) won`t reboot when it`s hot<br />
** 4GB SDHC Class 4 Ultra II<br />
** 4GB SDHC Class 6 Ultra (30MB/s BH1200421822D)<br />
** 4GB SDHC Class 6 Ultra (SDSDH-004G-U46 - BH1136121837G, BH1130521822D)<br />
** 4GB SDHC Class 10 Extreme (BH10297143382G)<br />
** 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 8GB SDHC Class 4 (writes at ~1.5MB/s)<br />
** 8GB SDHC Class 4 Ultra labelled as 15MB/s (BI1024716014G)<br />
** 8GB SDHC Class 6 Ultra <br />
** 8GB SDHC Class 6 micro - MMAGR08GUDCA-DB<br />
*** also SDSDH-008G-U46 - BI1131222083D see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
*** except SDSRH-008G-A11 could be problematic, see below<br />
** 8GB SDHC Class 6 Ultra labelled as 20MB/s (BI11321422083D)<br />
** 8GB SDHC-I Class 6 Ultra labelled as 30MB/s (SDSDH2-008G-AC11)<br />
*** requires updated Squeeze or Wheezy beta<br />
** 8GB SDHC Class 10 Extreme (BI11017514367G)<br />
** 8GB SDHC Class 10 Extreme (B11209116254G) - Managed to get it working with raspbian R3 [http://archive.raspbian.org/images/rpi_pisces_r3.zip rpi_pisces_r3.zip] however does not work with official squeeze nor Arch linux.<br />
** 8GB SDHC Class 10 Extreme (30MB/s HD Video) - working with new [https://github.com/raspberrypi/firmware/blob/9308c7ed387e5422883753f7fb71a75506abd1f8/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-10 for Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 images (BI1130916254G).<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-U46) - Works with stock debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (works with OpenELEC r11493)<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-UDQ46) - Works with stock 2012-09-18-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme (SDSDX-008G-X46/BI1218822414G) - Works with stock 2012-08-16-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-008G-X46) - Works with stock 2012-07-15-wheezy-raspbian<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 16GB SDGC Class 4 (SDSDB-016G-B35) - working with [https://github.com/raspberrypi/firmware/blob/234c19de7cbaaf4997671d61df20a05759066295/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-15 for Debian Squeeze 2012-04-19<br />
** 16GB SDHC Class 6 Ultra (30MB/s) (BL1133921933G) - Work with OpenELEC r11324<br />
** 16GB SDHC Class 10 Ultra(30MB/s) (SDSDU-016G-U46) - Work with stock debian6-19-04-2012 image. Gave Kernel Panic with stock debian6-19-04-2012 image. Worked fine with Wheezy image.<br />
** 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Works with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02)<br />
** 16GB SDHC Class 10 Extreme (45MB/s U1) (BL1203322025G) - Works with 2012-08-16-wheezy-raspbian.img (tested 2012-09-15). Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 16GB SDHC Class 10 Extreme (45MB/s) (SDSDXPA-016G-FPP) - Working with latest RaspBMC image (tested 12/09/2012) [http://www.amazon.co.uk/gp/product/B00422J0CG/ref=oh_details_o00_s00_i00 Amazon Link]<br />
** 16GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-016G-A75) - Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 32GB SDHC Class 4<br />
** 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 32GB SDHC Class 6<br />
** 32GB SDHC Class 10 Ultra (30MB/s) - Works with stock debian6-19-04-2012 image<br />
** 32GB SDHC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-032G-X46) - works with arch-04-29-image and latest firmware (booting problems without firmware update)<br />
** 64GB SDXC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-064G-X46) - works with 2012-07-15-wheezy-raspbian<br />
** microSDHC / microSDXC<br />
*** 4GB microSDHC Class 2<br />
*** 4GB microSDHC Class 4<br />
*** 8GB microSDHC Class 2<br />
*** 8GB microSDHC Class 4<br />
*** 8GB microSDHC Class 6 Mobile Ultra (SDSDQY-008G-U46A) working with the latest firmware, won`t reboot when it`s hot<br />
*** 8GB microSDHC Class 10 Ultra(30MB/s) (SDSDQU-008G-U46) tested and working on Raspbian wheezy (and RaspBMC)<br />
*** 16GB microSDHC Class 10 Mobile Ultra (SDSDQUA-016G-U46A) working with the latest firmware<br />
*** 32GB microSDHC Class 4 (SDSDQM-032G-B35)<br />
*** [http://img217.imageshack.us/img217/6435/dsc0255uc.jpg 64GB microSDXC Class 6 Mobile Ultra] (SDSDQY-064G-A11A) (boots up much more consistently with latest firmware)<br />
* '''Silicon Power''' <br />
** 4GB microSDHC Class 6 (SP004GBSTH006V10-SP)<br />
** 8GB microSDHC Class 10 (S608G1202)<br />
** 16GB microSDHC Class 10 (SP016GBSDH010V10)<br />
* '''Sony'''<br />
** 4GB SDHC Class 4 (SF-4B4) (Write 6MB/s, Read 20MB/s)<br />
** 4GB SDHC Class 4 (SF-4N4)<br />
** 8GB SDHC Class 4 (Write 11.8MB/s, Read 17.4MB/s)<br />
** [http://store.sony.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&partNumber=SF32NX/TQ#features 32GB SDHC Class 10 (SF-32NX/TQ)] (Max read speed of ~94MB/s, min write speed of ~10MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012) <br />
* '''Strontium'''<br />
** 8GB SDHC Class 10 (SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492))<br />
* '''Super Talent'''<br />
** 32GB Secure Digital High Capacity SDHC Card (Class 10), Model SDHC32-C10 SKU: 116-557-001 (works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian))<br />
* '''TakeMS'''<br />
** 4GB microSDHC Class 4 (with adapter) [http://www.takems.com/products.php?categ=flash&prod=Micro_SDHC-Card Micro SDHC Class 4 + 1 Adapter(Order No.88662)]<br />
* '''TDK'''<br />
** 4GB SDHC Class 4 (1008WW5261B)<br />
** 4GB SDHC Class 4 (80-56-10275-004G,Debian works '''BUT''' mmc0 errors when booting Fedora)<br />
** 4GB microSDHC Class 4 (80-56-10301-004G)<br />
** 4GB SDHC Class 6 (S404G1113) - Works with Debian Wheezy (2012-06-18 beta), not tried latest OpenELEC yet.<br />
** 8GB SDHC Class 10 - Works with Raspbian 2012-07-15<br />
** Sandisk 64GB Class 10 Ultra SDXC UHS-I FFP (3A114807)<br />
<br />
* '''Toshiba'''<br />
** 8GB mircoSDHC SD-C08GJ(BL3A<br />
** 16GB SDHC Class 10 SD-T16G (1046 US7022 C)<br />
* '''Transcend'''<br />
** 4GB SDHC Class 4 - we've found these to work without any errors and offer reasonable performance<br />
** 4GB SDHC Class 4 (TS4GSDHC4 - BH1130821915G)<br />
** 4GB SDHC Class 6 (TS4GSDHC6) - no problems. (does not work with Raspbmc as of 6/1/12)<br />
** 4GB SDHC Class 10 (TS4GSDHC10E)<br />
** [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-(SDHC)---Class-4 8GB SDHC Class 4] (TS8GSDHC4) (man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions.<br />
** 8GB SDHC Class 6 (~5.8 MB/s read/write following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (TS8GSDHC6-P2 - MMBFG08GWACA-M6)<br />
** 8GB SDHC Class 10 (TS8GSDHC10) [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-%28SDHC%29---Class-10- Transcend 8G class 10]<br />
** 16GB SDHC Class 6 (TS16GSDHC6)<br />
** 16GB SDHC Class 10 (TS16GSDHC10)(TS16GSDHC10E)<br />
** [http://www.transcend.com.es/tarjetas-de-memoria/sd-sdhc/32gb-sdhc-class-10 32GB SDHC Class 10] (TS32GSDHC10)(TS32GSDHC10E)<br />
** 64GB SDXC Class 10 (TS64GSDXC10)<br />
* '''Verbatim'''<br />
** 8GB SDHC Class 10 (43961)<br />
** 16GB SDHC Class 10 (43962)<br />
** 32GB SDHC Class 6 (44032)<br />
<br />
*'''Traveler'''<br />
**4GB High Speed Memory Card - no class mentioned. No problems. Tested with Raspbian.<br />
<br />
* '''The Pi Hut'''<br />
** Sandisk 4GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 8GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 16GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 32GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''V-Gen'''<br />
** 8GB microSDHC - no class mentioned. No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc. <br />
<br />
* '''Veho (http://www.veho-uk.com)'''<br />
** 8Gb "Ultra Fast" Class 6. (man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux.<br />
<br />
* '''W Photo (Walgreens photo)'''<br />
** 1GB SD memory card. Works with raspbmc, have not tested others.<br />
** 2GB SD memory card. Works with raspbian, not tested with others.<br />
<br />
Known good (and pre-loaded) cards will be available for sale from RS and element14 at a ''later'' date (TBA).<br />
<br />
===Problem SD Cards===<br />
<br />
Make sure that you buy your card from a reliable source. There are many cheap Chinese copies of (brand name) SD-Cards on the market, [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit/] in addition they are often mislabeled as having greater capacity than they really have. For example they might be sold as being 4GB, but are actually 2GB (or even less). <br />
<br />
There were initially issues with most Class 10 SDHC cards, apparently due to a bug in the Broadcom bootloader.[http://www.raspberrypi.org/forum/general-discussion/class-10-sd-cards-on-the-production-boards/page-3/#p39181]<br />
<br />
This seems to have been fixed in sdhci.c: [https://github.com/raspberrypi/linux/commit/7e8ae226fe6e95954df6b0dcdde40a53dbbc1a0b] Further feedback will be useful.<br />
<br />
If you add an SD card here, please also mention the kernel date and the date you tried it. This allows people to estimate how likely it is that a driver-fix in the kernel has been fixed. (i.e. I think some/most of the cards here work fine now, because a problem in the kernel driver has been fixed). <br />
<br />
* '''Acumem'''<br />
** 8GB SDHC Class 6 (many errors on 6/7/2012)<br />
* '''Adata'''<br />
** 2GB Speedy (MMAGF02GWMCA -NA)<br />
** 8GB SDHC Class 6 - Sometimes boots<br />
** 16GB SDHC Class 6 (Possibly SD5MY168G0, label with gold <> black gradient) - Doesn't boot<br />
* '''Agfa'''<br />
** 16GB MicroSDHC class 6 (as written on SD-Adapter, MicroSD card itself no-name? ENAAJK121960): mixed results, such a card was working on another RPi<br />
* '''Amazon Basics'''<br />
** 16GB SDHC Class 10 (many errors on 6/7/2012)<br />
* '''Delkin Devices'''<br />
** 4GB SDHC Class 6 "Delkin pro" -- Note: works with Fedora Beefy Miracle 17<br />
* '''GSkill'''<br />
** 32GB SDHC Class 10<br />
* '''Integral'''<br />
** 16GB SDHC Class 6 Ultima Pro (SH016GAA2BB)<br />
** 4GB SDHC class 4 (S404G1115)<br />
* '''Kingston''' <br />
** 2GB SD [http://www.geeks.com/details.asp?invtid=KING-SD-M02G-BULK looks like this] - boots the kernel, but damages the filesystem.<br />
** 4GB SDHC Class 6 - Boots kernel but won't run init (times out)<br />
** 8GB/Go SDHC Class 10 - SD10V/8GB Very slow writing images to card and then either won't boot, or boots very slowly<br />
** 16GB SDHC Class 4 (SDC4/16GB17) - Device does not recognize it <br />
* '''Memory2GO'''<br />
** 4GB SDHC Class 6 (S404G1029) - I/O Errors leading to Kernel Panic on startup.<br />
* '''Micro Center'''<br />
**4GB SDHC Class 4 — hasn't worked with any of the images I've tried; appears to be completely unrecognized<br />
* '''MyMemory.com''' <br />
** 8GB SDHC Class 10<br />
<br />
* '''Optima''' <br />
** <del>8GB SDHC Class 4 - Does not boot with Raspbian Wheezy 2012-07-15</del> - works with 2012-09-18 <br />
<br />
* '''Panasonic''' <br />
** 8GB SDHC Class 10 (RP-SDU08GD1K) mmc0: timeout waiting for hardware interrupt [http://www.mymemory.co.uk/SDHC/Panasonic/Panasonic-8GB-UHS-1-London-2012-Collection-SDHC-Card---Class-10 Panasonic 8GB Class 10]<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PS8GSDHC10-BC) - repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian<br />
** 8GB SDHC Class 10 (PSF8GSDHC10)<br />
** 8GB SDHC Class 10 (PSF8GSDHC10-PC) - won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc.). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore).<br />
* '''Platinum''' <br />
** 8GB SDHC Class 8 (O08G840 M3100487 TW)<br />
** 16GB SDHC Class 10 (article code 177117) - Does not boot with Raspbian Wheezy 2012-09-12<br />
* '''PNY'''<br />
** 8GB Optima SDHC 120 HD Class 4 SD-K08G 0928 WF3673 - mmc -110 errors at init time on 6/12/12<br />
** 8GB Premium SDHC Class 4 - mmc - mmc0: timeout waiting for hardware interrupt<br />
** 32GB SDHC Class 10 Professional (P-SDHC32G10-EF) from [http://www.play.com/Electronics/Electronics/4-/18814903/-/Product.html play.com] (mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)<br />
** 2GB card SD-M02G<br />
* '''Polaroid'''<br />
** 16GB SDHC C10 (P-SDHC16GB10-EFPOL) - mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 233x - mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic, ...<br />
* '''Reekin'''<br />
** 4Gb HighSpeed SH4GC6M16MIN9C0812TE (old) don't boot ! (11/07/2012)<br />
* '''Samsung'''<br />
** 4GB SDHC Class 4 (MB-SS4G MBSS4GMBDDBA-DD) doesn't boot with [http://downloads.raspberrypi.org/images/raspbian/2012-07-15-wheezy-raspbian/2012-07-15-wheezy-raspbian.zip 2012-07-15-wheezy-raspbian] - OK light partially lit.<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt), but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy]<br />
* '''SanDisk''' <br />
** 2GB SD Extreme III (BE0722702998D) (man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)<br />
** 2GB SD (BE0916214253D)<br />
** 2GB Ultra || 15MB/s (BE0828713280D)<br />
** 4GB SDHC Class 2 - Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt.<br />
** 4GB SDHC Class 2 "Limited Edition" (8H825413279G) - Error -110 whilst initialising sd card<br />
** 4GB SDHC Class 4 (BH1030216016G) - Doesn't boot.<br />
** 4GB SDHC Class 4 (BH1031116016G) - Doesn't boot.<br />
** 4GB SDHC Class 6 Extreme (BH0822411730D)<br />
** 4GB SDHC Class 6 Extreme III (30 MB/s) (BH0822712362G)<br />
** 4GB SDHC Class 10 Extreme (SDSDX-004G-X46) (30 MB/s HD Video) doesn't boot (also not with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta)<br />
** 4GB SDHC Class 10 Extreme (30 MB/s HD Video) (Doesn't boot) - Works with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot]<br />
** 4GB microSDHC Class 6 Mobile Ultra (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found<br />
** 8GB SDHC Class 6 Ultra (B11201421964G)<br />
** <del>8GB SDHC Class 6 Ultra (SDSDH-008G-U46 - BI1131222083D) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )</del> see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s (BI1208721965G)) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSRH-008G-A11 - Boots kernel but won't run init ( mmc timeout waiting for interrupt ) <br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSDH-008G-T11 - Boots kernel but won't run init ( debian6-19-04-2012: mmc timeout waiting for interrupt ) , but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy] on 6/22/12<br />
** 8GB SDHC Class 6 Ultra I (BI1201221964G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Extreme (BI1101116253G)<br />
** 8GB SDHC Class 10 Extreme (BI1108716254G)<br />
** 8GB SDHC Class 10 Extreme (BI1201416254G) - Still doesn't work with Debian Wheezy beta (2012-06-18)<br />
** <del>8GB SDHC Class 10 Extreme (BI1201516254G) [[http://www.amazon.co.uk/gp/product/B00422FBJ2 amazon.co.uk]]+amazon.fr</del> works with wheezy 19/09/2012<br />
** 8GB SDHC Class 10 Extreme (BI1200916252D/SDSDX-008G-X46) - Tried with Debian "Squeeze"(19/04/2012), Debian "Wheezy"(18/06/2012) and Arch Linux(13/06/2012). None works. With Debian "Wheezy" Green LED stays ON continuously, with the other two it turns on very faint.<br />
** 8GB SDHC Class 10 Extreme Pro- Works with updated kernel/firmware, stock debian6-19-04-2012 boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** <del>16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Doesn't boot with debian6-19-04-2012.img, or newer firmware (tested 2012-06-17).</del><br />
** 16GB SDHC Class 6 Ultra (BL1202021933G)<br />
** 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
* '''Silicon Power''' <br />
** 32GB SDHC Class 6 (LS2N732GQON03ASP) - boots debian6-19-04-2012.img, but frequent slow response / system hangs.<br />
<br />
* '''TDK'''<br />
** 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot] but still won't run init.<br />
** 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried (4th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github [https://github.com/raspberrypi/firmware/tree/87a04c0be0c05e20f94f223183a0310b37c9bd89/boot] but still got 'Error -84' and 'Kernel panic - not syncing: No init found'<br />
<br />
* '''Transcend'''<br />
** 2GB MicroSD (MMAGR02GUECA-MB) - reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots.<br />
** 32GB MicroSD (TS32GUSDHC4) - Doesn't boot.<br />
** 2GB SD (6451AG 2G O2DS1)<br />
** 16GB SD Class10 (TS16GSDHC10U1) - Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"<br />
* '''Veho'''<br />
** 4GB SDHC Class 6 <br />
* '''Verbatim'''<br />
** 16GB SDHC Class 6 (47178) - Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt<br />
** 8GB microSD Class 10 (44012) - ArchLinux - boots, but after system update develops segmentation faults<br />
<br />
The usual warnings against less reputable sellers (such as Ebay merchants) apply.<br />
<br />
<br />
Note that the following error is sometimes accompanied with a non-working SD card after booting (on Debian):<br />
<br />
mmc0: timeout waiting for hardware interrupt<br />
<br />
=== Benchmarks ===<br />
<br />
* http://www.sakoman.com/OMAP/microsd-card-perfomance-test-results.html<br />
* http://usbspeed.nirsoft.net/usb_drive_speed_summary.html?o=11<br />
* http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076<br />
* http://forum.xda-developers.com/showthread.php?t=1005633 (Doesn't originate from R-Pi, but very related)<br />
<br />
== Foreign Language Translations ==<br />
* [[Ru:RaspberryPiBoardVerifiedPeripherals]]<br />
<br />
== References ==<br />
<references><br />
</references><br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426https://elinux.org/index.php?title=RPi_VerifiedPeripherals&diff=180644RPi VerifiedPeripherals2012-10-14T01:38:10Z<p>Lob0426: /* Working USB Hubs */</p>
<hr />
<div>[[Category: Linux]]<br />
[[Category: ARM Development Boards]]<br />
[[Category: Broadcom]]<br />
[[Category: Development Boards]]<br />
[[Category: RaspberryPi]]<br />
[[Category: Education]]<br />
{{Template: RPi_Hardware}}<br />
<br />
<br />
'''A note about this page: For USB devices, please specify if they required a powered hub'''<br />
==Notes==<br />
<br />
19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the [http://www.raspberrypi.org/downloads default Debian distribution] unless stated otherwise. A suggested suffix markup scheme is as follows:<br />
<br />
* (A) - Relates to model A production board<br />
* (B) - Relates to model B production board<br />
* (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different<br />
* No markup - relates to all production boards<br />
<br />
''Discuss: [http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247 http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247]''<br />
<br />
If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order.<br />
<br />
==Power Usage Notes==<br />
{{Warning|Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the RPi. If the RPi's supply voltage falls below a certain value (anecdotally stated as around 4.75V), or it begins to fluctuate, your setup may become unstable. There is a [http://elinux.org/RPi_Hardware#Power Wiki section about this issue] which is worth a read.}}<br />
<br />
'''Model B Hardware Revisions and USB Power limits'''<br />
'''Hardware Revision 1.0'''<br />
The original Model B board had current limiting polyfuses which limited the power output of each USB port to approximatly 100mA. USB devices using more than 100mA had to be connected via a powered hub. The PI's PSU was chosen with a power budget of 700mA of which 200mA were assigned to the USB ports, so the Raspberry Pi's (poly)fuses were designed only for devices up to 100mA, and typical 140mA polyfuses will have as much as 0.6 volt across them when drawing currents near the 100mA limit. As a consequence the USB ports are only directly suitable for "single current unit" USB devices which, according to USB specifications, are designed to work with just 4.4 Volt. Not only do non single current unit devices draw more current (causing greater Voltage drops, and greater stress on the fuses), they also might require 4.75 Volt to work.<br />
<br />
'''Model B Hardware Revision 2.0 and Revision 1.0 with ECN0001 change'''<br />
This had the polyfuses removed, removing the 100mA current limitation for each USB port (but leaving the main fuse F3 intact). Users should still ensure their power supply can power the RPi and the USB peripherals. Revision 2.0 was released in August 2012.<br />
<br />
==Linux Driver Issues==<br />
Shortly after the Raspberry Pi was released it was it was confirmed that there were a number of issues with the Linux USB driver for the SMSC95xx chip. These included problems with USB 1.x peripherals that use split transactions, a fixed number of channels (causing problems with Kinect) and the way the ARM processor handles the SMSC95xx interrupts. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097&start=76] [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=5249&start=44]<br />
A large number of fixes were included in the 2012-08-19-wheezy-raspbian Linux image.<br />
<br />
== Powered USB Hubs ==<br />
A number of low-cost powered USB hubs are known to have caused problems. Members of the Raspberry Pi forums have reported low power or no power at all in some cases. The following is a list of specific Powered USB Hubs which appear to be fault-free. Please note that these do not take into account powering the Raspberry Pi from the hub, in addition to its peripherals.<br />
<br />
If you use a powered hub and PI PSU together consider powering them from the same power bar with switch, so you can turn them on simultaneously., especially if the HUB tries to feed the PI through their interconnect cable, due to the 100mA limiting fuse in the PI the PI will be partially powered which may cause problems (unwanted writes to the SD card).<br />
<br />
===Working USB Hubs===<br />
*'''Acme'''<br />
** USB 2.0 hub 4 port ([http://www.acme.eu/en-us/product/019188 ACME]) Based on NEC μPD720114 USB2.0 Hub Controller USB ID 0409:005a '''NOTE!''' It is bus-powered hub, but very cheap and small and works after a small modding: on usb-hub board you have 4 holes: V, D+, D- and GND. Connect GND, D+ and D- to the RasPI, and additionally connect GND and +5v from power supply to the same holes on usb-hub GND and V. Now there is common contacts: GND, D+ and D- between RasPI and hub needed to work, and additional power for USB devices, connected to the hub. Tested on my RasPI.<br />
*'''Belkin'''<br />
** F4U040 4-Port Ultra-Slim Desktop hub (powered 5v, 2.6A, lsusb lists as Genesys Logic 05e3:0608)<br />
** F5U224 4 port powered USB hub<br />
** F5U231/F5U234 Hi-speed USB 2.0 Tertrahub - 4 port powered USB hub (verified.. able to power Raspberry Pi using micro USB directly from hub)<br />
** F5U237 7 Port powered USB 2.0 5V 3.8A (5 back port 2 top ports)<br />
** F5U259-ME USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time)<br />
** F5U403 USB 2.-0 4 Port Hub (Powered, suspect see F5U404 in non-working, didn't test power the RPi from hub.)<br />
** F5U700 USB 2.0 7-Port Hub (Powered, able to power Raspberry Pi via micro USB directly from hub)<br />
** F5U706ea/uk 2-in-1 Hub (USB 2.0, powered, 7-port)<br />
** F5U706701PerBlk 7-in-1 Hub (USB 2.0, powered 5V 2.5A , 7-port)<br />
** F4U039qukAPL 7 port Ultra-Slim Desktop Hub (internally two Genesys Logic 05e3:0608 devices - powering RPi from port furthest away from power supply. Toshiba Stor.E 1TB must be powered from ports closest to the power supply to avoid errors in dmesg. Flash drives seem fine on ports away from the power supply.)<br />
*'''Benq'''<br />
** E2220HD LCD Monitor with 4 port USB Hub. Able to power the Pi and no backfeed of power from the monitor to the Pi via the interconnect. Just works.<br />
*'''Biltema'''<br />
** 23-924 4-port powered USB 2.0 Hub (2.0A) Able to power Raspberry Pi via USB port<br />
*'''CyberPower'''<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817804002] CP-H720P 7-port powered hub with 3.6A adapter. Internally, a NEC Corp 0409:0050 device. Works perfectly with Model B, regardless of whether the RPi is being powered by the hub or externally.<br />
*'''Dell'''<br />
** Dell 2001FP monitor has 4 USB ports and acts as a powered hub.<br />
** Dell SP2309W monitor has 4 USB ports and acts as a powered hub.<br />
** Dell 2407FWP monitor has 4 USB ports and acts as a powered hub. Additionally, the 6-in-1 Card Reader part of the monitor works as well, though it will not read SDXC Cards.<br />
** Dell U3011 monitor has 4 USB ports and acts as a powered hub. Additionally, the Card Reader part of the monitor works as well, and is compatible with 128GB SDXC Lexar Brand Cards <br />
*'''DELTACO'''<br />
** [https://www.deltaco.se/products/items/itemid/(UH-715)/index.aspx UH-715 Rev 2] 7-port powered hub with 2A adapter.<br />
*'''DYNEX'''<br />
** 7port hob idVendor=0409, idProduct=0050 works<br />
*'''D-Link'''<br />
** [http://www.amazon.com/D-Link-DUB-H7-High-Speed-7-Port/dp/B00008VFAF] 7-Port USB Hub DUB-H7 (See note below - doesn't work for all, apparently). Working model marked BUBH7A....A5. Worked with Debian on production B model, for keyboard, mouse, and thumb drives, also worked with ArchLinux, didn't work with Bodhi Linux immediately thereafter. Recent model did not work with default raspbian firmware (3.1.9+ #272); updated firmware with rpi-update (to 3.2.27+ #66), now seems to work perfectly.<br />
** [http://www.newegg.com/Product/Product.aspx?Item=N82E16817111131] 4-Port USB Hub DUB-H4 Worked on Debian with keyboard, mouse, and thumb drive. Also tested with Raspbmc and external HD (powered through USB). While the hub has a charging port, which should be able to provide power enough to the RasPi (1.2 A), connecting the RasPi here doesn't work, as it seems the power is cut during boot (At least with hub hardware rev. C1). While it does boot from any of the other ports, it shouldn't be used it doesn't provide enough power (Standard 500 mA per port. Measuring at P1-P2 on the RasPi: ~4.45 V).<br />
*'''Digicom'''<br />
** [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MiniHubUsb204P#] MiniHUB 4-Port USB 2.0 with PSU 5V - 2A .<br />
*'''Digitus'''<br />
** 7-port USB2.0 Powered Hub. Model DA-70226.<br />
*'''Eminent'''<br />
** [http://www.eminent-online.com/en/product/22/em1102-4-port-usb-hub---black.html] EM1102 4 Port USB 2.0 Hub with 1A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
** [http://www.eminent-online.com/en/product/27/7-port-usb-2-0-hub.html] EM1107 7 Port USB 2.0 Hub with 2A power adapter. It's able to power the RPi, external HDD and other peripherals.<br />
* '''GearHead'''<br />
** [http://www.amazon.com/gp/product/B004OBZ088/] GearHead 4 Port Hub with Energy Saving Power Switch (5V, 1A)<br />
*'''Gembird'''<br />
** Gembird UHS 242 4-port USB 2.0 Hub 1.8 Amps<br />
* '''Genesys Logic (sold at Fry's)'''<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0608) (Other brands include Gigaware and Belkin, same ID shows up in lsusb)<br />
** Genesys Logic 4-Port USB 2.0 Hub (ID 05e3:0606) (Other brands include i-Rocks, same ID shows up in lsusb)<br />
* '''Hama'''<br />
** Hama 4-way USB 2.0 Hub<br />
*'''HP'''<br />
** HP ZR2240w 21.5" Monitor with built in 2-Port USB Hub (B)<br />
*'''Laser'''<br />
** "7 port USB hub with AC adapter Version 2.0". 5V 1A (found at Harvey Norman Australia for $24.95 and Australia Post Shops for $9.95). You can power the PI by connecting both the main USB connector to the PI USB port, '''and''' from a spare USB port back to the power micro USB socket. If you don't do both, boot-loops are likely to occur.<br />
*'''Logik'''<br />
** [http://www.currys.co.uk/gbuk/logik-lp4hub10-4-port-powered-usb-hub-04979038-pdt.html] LP4HUB10 4-Port USB Hub. '''Throws errors when used with Fedora remix 14'''<br />
** Logik L4THUB10 4 Port powered hub works fine under raspbian/wheezy/model B. Captive usb cable, 2A power supply, convenient single top mounted usb socket. Unlike my last hub, will power wifi!<br />
*'''LogiLink'''<br />
** UA0085 USB 2.0 Hub, 4-Port with PSU 5V, 2A<br />
** UA0091 USB 3.0 Hub, 4-Port with PSU 5V, 4A. Connected with USB2.0 cable. 1A per port, able to support USB HDD drives and other power hungry devices. Tested with kernel 3.1.9-cutdown, Wheezy. <br />
** UA0096 USB 2.0 Hub, 10-Port with PSU 5V, 3.5A (Not suitable for powering RPi because it doesn't work unless there is working USB input present even with PSU plugged in.)<br />
** UA0160 USB 2.0 Hub, 4-Port with PSU 5V, 2A. Able to power the RPi, keyboard, mouse and LogiLink UA0144 USB ethernet adapter. (More testing to come.)<br />
* '''Manhattan'''<br />
** [http://manhattan-products.com/en-US/products/6500-hi-speed-usb-2-0-micro-hub] (#160612) Hi-Speed USB 2.0 Micro HUB, AC Powered (identifies as ID 05e3:0608 Genesys Logic) Includes a 1000mA wall-wart (US style)<br />
*'''Newlink'''<br />
** NLUSB2-224P 4 port USB 2.0 Mini hub with PSU 5V 1A<br />
*'''Nilox'''<br />
** Nilox USB 2.0 4port HUB model HUB4USB2AC with PSU 5V 1.0A <br />
* '''Plugable'''<br />
** [http://plugable.com/products/USB2-HUB4BC/] USB2-HUB4BC 4 Port USB 2.0 Hub with BC 1.1 Fast Charging. 5V 2.5A power supply. Powering Pi via microUSB from a hub port. USB Audio peripheral tested and working.<br />
* '''Pluscom'''<br />
** Pluscom 7 Port USB 2.0 Hub Model U7PH-3A with 3Amp PSU. USB ID 1a40:0101. Powering Pi via microUSB from a hub port. Internally two 4 Port switches linked. Leaks power back up USB data cable to Pi but not really a problem when powering Pi at the same time.<br />
*'''Staples (Business Depot) (Bureau EN GROS)'''<br />
** Staples 4-port hub Item 607477-CA<br />
*'''StarTech.com'''<br />
** StarTech.com 7-port Compact USB 2.0 Hub (ST7202USB). Comes with 5v 2A supply. Shows in lsusb as two Genesys Logic, Inc. USB-2.0 4-Port HUBs (05e3:0608). Back powers Pi (Just, Voltage across TP1 & TP2 is a little low when powered from this hub).<br />
*'''SumVision'''<br />
** Sumvision Slim 4 Port High Speed USB 2.0 HUB with PSU 5V 1.0A (from [http://www.7dayshop.com/catalog/account_history_info.php?page=1&order_id=5130107 | 7dayshop ])<br />
*'''Sitecom'''<br />
** CN-032 4 Port USB 2.0 Pocket Hub. Works for powering the Pi, an USB WLAN Adapter, wireless Kbd+Mouse. Using an 2500 mA Voltcraft <br />
** CN-060 4 Port USB 2.0 Hub powered with AC Adapter (1A). Powering Pi via microUSB from a hub port.<br />
*'''Sweex'''<br />
** US014 4 Port USB 2.0 Hub<br />
*'''Targus'''<br />
** ACH81xx 7-port powered hub. 5V 3A power supply, with 2 high power ports. (possible conflicting behaviour with USB keyboard / Wifi Dongles)<br />
** ACH63EU 4-port. Using a 5V 2A power supply, which isn't supplied with the hub, it is able to power the PI as well.<br />
*'''The Pi Hut'''<br />
** 7 Port USB Hub (from [http://thepihut.com/products/7-port-usb-hub-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
*'''Trendnet'''<br />
** [http://www.trendnet.com/products/proddetail.asp?prod=130_TU2-700&cat=49] TU2-700 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2A)<br />
*'''Tripp-Lite'''<br />
** [http://www.tripplite.com/en/products/model.cfm?txtModelID=3167] U222-007-R 7 Port Powered USB 2.0 Hub with AC Adapter (5V 2.5A) Powering RPi from Hub works<br />
*'''Ultron'''<br />
** [http://www.ultron.de/v1/produktansicht.php?artnr=67072&kid=bfa8340c4e245...&l=en&WGType=Neue+USB-HUBS] UHN-710 7-port powered hub with PSU 5V, 3A. USB ID 1a40:0201.<br />
*'''VANTEC'''<br />
** 4 Port USB 2.0 Powered Hub Model: UGT-MH304. 5V 2A AC/DC adapter. Go 2.0 Mini hub.<br />
*'''Z-TEK'''<br />
** Z-TEK 7-port powered hub with PSU 5V, 4A. USB ID 1a40:0201.<br />
*"Unknown"<br />
** 10(7-4) port hub idVendor=1a40, idProduct=0201 / idVendor=1a40, idProduct=0101 works<br />
<br />
===Problem USB Hubs===<br />
<br />
Please check known workarounds [http://elinux.org/Rpi_USB_check-list here] before adding to the list<br />
<br />
*'''Addon'''<br />
** 7-Port Powered Hub - labelled ADDUH070P - Gives constant Eth0 errors on boot.<br />
*'''Belkin'''<br />
** 7-Port Powered Mobile Hub - device labelled F4U018, packaging labelled F5U701. lsusb reveals it to be two Genesys Logic 4-port hubs based on the GL850G chipset (vendor: 0x05e3 product: 0x0608) ganged together. Yields a lot of "handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" errors and device resets in /var/log/messages. Low speed devices such as keyboards work OK, wifi/mass storage is unreliable or broken. -- No error messages with the latest kernel, but still unstable with mass storage devices. Also, leaks current back to the Pi (can be fixed by overtaping GND and +5V pinouts)<br />
** F4U022 7-Port powered USB hub (powered 5v, 2.6A), same as F4U018<br />
** 7-Port Powered Hub - device labled F5U237 Rev.3 - ID 050d:0237 Wired ethernet fails to connect; gives "DWC OTG HCD URB enqueue failed adding QTD. Error status -4008" Result is same as DUB-H7 below.<br />
** F5U404 Hi-Speed USB 2.0 4-Port Mobile Hub. Faulty/bad design; Leaks current back up the cable to the Raspberry Pi.<br />
** F5U307 Hi-Speed USB 2.0 7-Port Hub (Powered, able to apply power to Raspberry Pi via micro USB from this hub at same time) It work's sometimes. (Works always without powering the RPi, haven't tried that)<br />
<br />
*'''Dell'''<br />
** Dell U2410 Monitor Built-in 4 Port Hub - Shows up as a pair with 0424:2514 and 0424:2640. Standard Microsystems Corp. USB 2.0 Hub. When connecting some devices it kills the Ethernet with "smsc95xx 1-1.1:1.0: eth0: Failed to read register index 0x0000011X" errors. It did work for a keyboard and webcam. Bluetooth that works connected directly to the Pi triggers the error.<br />
<br />
*'''DELTACO'''<br />
** 7-Port USB Hub UH-713 Rev 3. This one consists also of two 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUBs connected together. The power supply is rated at 5 V 2 A. It kills ethernet when X11 is started.<br />
<br />
*'''Dynex'''<br />
** 7-Port USB Hub - Does not work in Debian 19-04 image.<br />
** DX-HB7PT 7-Port USB Hub - As per the Gear Head below, it's 2 daisy-chained Genesys Logic 05e3:0608 devices. Appears to result in significant slow downs when the USB is under load, such as running the root filesystem from a USB drive.<br />
<br />
*'''Dynamode'''<br />
** 7-Port USB 2.0 Hub (Silver and black). Feeds power back up the interconnect to the Pi causing the power LED to light on the Pi if the hub is powered on but the Pi is not. The Pi also fails to boot when powered off this hub, with or without the interconnect plugged in. Stops the network from working when connected to the Pi after booting the Pi - cannot ssh to the Pi. Best avoided. :-( Shows up in ''lsusb'' as a pair of ''ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB'' which is interesting. - Confirmed. This hub also appears unable to power an external USB drive using a y-cable as it gives the error -71 message in dmesg (when providing external power to the RPi)<br />
** 4-Port High-Speed USB 2.0 Hub (USB-H40-A2.0), came with with a 1A power supply. Leaks power to the Pi through the uplink. Doesn't work with Pi, unless the Pi is powered by a second power source. This hub is completely generic and I've seen it being sold under different brand names as well. Therefore, a picture is [http://i.imgur.com/BPZ3j.jpg included] for easy identification. <br />
<br />
*'''D-Link'''<br />
** 7-Port USB Hub DUB-H7 (Crashes USB stack, including Ethernet, when plugging / using some peripherals). (See note above, it works with some distros and/or with latest firmware)<br />
<br />
*'''E-Solution'''<br />
** 4-Port 2A Supply (Does not detect at all during boot or after boot- no messages) [IC = Alcor Micro Corp (AU6254)]<br />
<br />
*'''Fosmon'''<br />
** 7-Port USB 2.0 Hub w/ 1A Power Supply (Causes interference with other USB devices and sends enough power to light up the pi with it's Micro USB cable unplugged).<br />
<br />
*'''Gear Head'''<br />
** UH7250MAC 7-port powered hub. Internally, two daisy-chained Genesys Logic 05e3:0608 devices. Causes Ethernet instability when used under very specific circumstances, in X11.<br />
** <strike>UH5200T 4-port powered hub. As of 2012-08-16 Wheezy, if any USB 1.x device (a keyboard, for example) is plugged into this hub, Ethernet stops, and USB interrupts for other devices get dropped (keys repeating forever), etc. Occurs even if power is not attached (not a power leakage problem).</strike> Appears working after a bootloader and/or firmware update on 9/12. Also, turned out to be somewhat more specific to the combination of two particular low-speed devices.<br />
<br />
*'''Hama'''<br />
** 4-Port USB 2.0 "bus hub", model 78496 (?). Only works for low power devices (card readers?), but does not work for power hungry devices (HDD,WLAN). Doesnt boot when hub connected to RPi. The funniest thing is that RPi powers on when I plug in this hub to normal size USB port (not that small dedicated port). idVendor=05e3, idProduct=0608<br />
<br />
*'''Kensington'''<br />
** 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning keyboard, kills mouse when GUI started).<br />
<br />
*'''Inland'''<br />
** 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't, cheap unshielded untwisted wire design)<br />
<br />
*'''Logik'''<br />
** LP7HUB11 7-Port USB Hub. (Ethernet failed, slow response, in LXDE. Happened whether or not the hub's independent power supply was connected to the hub.)<br />
<br />
*'''Soniq'''<br />
** 4-Port 5V supply. Model number CUH100. (B). Appears to draw power away from the Raspberry Pi, even when the Pi has an isolated power line. Netgear WNA1100 WiFi Adapter (which is known to work in other setups is recognized, but unresponsive.<br />
<br />
*'''Targus'''<br />
** ACH115EU 7-port powered hub. 5V 3A power supply. Arduino communicates with RPi when connected directly to Pi's USB port, but it hangs soon if connected via ACH115. Also sometimes smsc95xx eth0 Failed to read register index 0x00000114 etc. errors in syslog when used.<br />
<br />
*'''TCM'''<br />
** Model 234298 s/n T634007737 powered hub. 4 ports plus card reader. 1A power supply. Model B, Wheezy raspian works ok with keyboard/mouse but problems with WiFi no connects. (insufficient power?)<br />
<br />
*'''Trust'''<br />
** 10-port USB 2.0 Hub (powered). Prevents ethernet from being recognised.<br />
** SliZe 7 port USB 2.0 Hub (powered) - Item number 17080 (Barcode 8 713439 170801). Prevents ethernet from being recognised. Keyboard sends multiple characters. <br />
<br />
*'''Unbranded / Multiple Brands'''<br />
** 7-port silver/black hub. Also sold elsewhere under brands such as 'EX-Pro', 'Trixes' and 'Xentra' -- This is ''probably'' due to an inadequate power supply. -- I replaced the terrible power supply with a very good one, kept getting "DEBUG: handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" in dmesg, with no devices plugged in to the hub (with or without the power supply in)<br />
** Generic 7-port black hub with Genesys Logic GL850A chipset<br />
** Cerulian 10 Port USB 2.0 Top Loading Hub with 2A supply (kills mouse and network port)<ref>http://www.raspberrypi.org/forum/absolute-beginners/cheap-powered-usb-hub-uk/#p76452</ref><br />
** [http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10307&cs_id=1030701&p_id=226 USB 2.0 4 PORT INT/EXT DUAL HUB BAY] -- Genesys Chipset -- idVendor=05e3, idProduct=0607 -- low speed devices worked, but strange USB failures when X session started. High speed devices such as hard drives had failures.<br />
<br />
== USB Remotes ==<br />
* ATI Remote Wonder (X10 Wireless Technology, Inc. X10 Receiver) — ID 0bc7:0004 — appears as a joystick-like 2 button mouse and a 0-9 keypad without drivers on console and X.<br />
<br />
* [http://www.amazon.com/gp/product/B005DKZTMG/ref=oh_details_o02_s00_i00 Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad (920-003070)] - keyboard and touchpad work. Have not verified multi-touch features.<br />
<br />
* [http://www.ipazzport.com/02A.html iPazzport] mini 2.4 GHz wireless keyboard and touchpad. <br />
<br />
* [http://www.ortek.com/html/pdt_view.asp?area=46&cat=152&sn=76 PKB 1800] Wireless Smart Pad ad Mini Keyboard. Pad works as mouse but not multi touch features. Keyboard works.<br />
<br />
* [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] '''Rii''' Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]. Working perfectly, just plug & play.<br />
<br />
* [https://www.google.com/search?q=tranksung+TS-Y150 Tranksung TS-Y150] USB RF Keyboard and air mouse (B)<br />
<br />
* [http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6753651&CatId=3680# Exo Ultra U12-41310 Mini Keyboard] Bluetooth Adapter, Touchpad, Laser Pointer, Presentation & Multimedia Controls work perfectly but need a little love and config for make it work.[https://github.com/thunderbirdtr/rs-pi-exo-keyboard Exo Installer script]<br />
<br />
== USB Keyboards ==<br />
USB keyboards that present themselves as a standard HID (Human Interface Device) device should work. '''Please be aware that some of these keyboards were probably used with a powered hub'''<br />
=== Working USB Keyboards ===<br />
The following is a list of specific keyboards known to work and which appear to work fault-free.<br />
<br />
* '''A4 Tech'''<br />
** Model KL-5 USB Keyboard, 20mA.<br />
<br />
* '''ABS'''<br />
** M1 Heavy Duty Professional Gaming Mechanical Keyboard (B)<br />
<br />
* '''Action Star'''<br />
** ACK-5010U Mini Keyboard And Mouse<br />
<br />
* '''Accuratus'''<br />
** KYB-Toughball-HI<br />
<br />
* '''Acer'''<br />
** KG-0917 Wireless Keyboard And Mouse Bundle (B)<br />
** KU-0906 Compact Keyboard (B) (Also known as Genius LuxeMate i200 Keyboard)<br />
** SK-9625 Multimedia Keyboard (B) (multimedia functions not tested)<br />
<br />
* '''Adesso'''<br />
** [http://ergoprise.com/product_images/j/699/ADP-PU21_big__14173_zoom.jpg PS/2 to USB Adapter] ADP-PU21, 100mA (tested only with keyboards) Any PS/2 keyboard will work only if it will work with a reduced operating voltage.<br />
** Model AKB-410UB. Keyboard with Touchpad.<br />
<br />
* '''Apple''' (Apple keyboards that have USB ports require an external powered hub to work, and do not work on the PI directly!)<br />
** [http://upload.wikimedia.org/wikipedia/commons/thumb/e/ea/Apple_iMac_Keyboard_A1243.png/800px-Apple_iMac_Keyboard_A1243.png Apple Keyboard with Numeric Keypad (aluminium/wired) A1243]<br />
** [http://upload.wikimedia.org/wikipedia/commons/8/81/Apple_Keyboard_A1242.jpg Apple Keyboard (aluminium/wired) A1242]<br />
<br />
* '''Asda'''<br />
** Basic Wired Keyboard HK2026 (B)<br />
** Basic Wired Keyboard HK3014<br />
*** (Please note when I put this keyboard through Newlink USB hub, it didn't work as expected)<br />
** Premium Wireless Keyboard (white keys, silver back) HK8028<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''Asus'''<br />
** KS-631U (comes with Asus Vento KM-63 keyboard/mouse set, not using powered hub) (B)<br />
<br />
* '''BTC - Behavior Tech Computer Corp.'''<br />
** Wired Portable Keyboard Model 6100 US (86+9 keys)<br />
*** Works with or without a powered hub<br />
** Wireless Multimedia Keyboard with build in pointer/mouse Model 9029URF III (86+17 keys) (B)<br />
** [http://www.btc.com.tw/english/2-7-07keyboard.htm Wired Multimedia keyboard 6311U/6310U] - rated at 5V/100mA, works directly<br />
<br />
* '''Bush'''<br />
** Wired Slimline Keyboard KU-0833<br />
*** This does not require a USB hub in order to work with the Raspberry Pi<br />
*** In the UK, it is available from Argos for £9.99<br />
<br />
* '''Cerulian''' <br />
** Mini wireless keyboard and mouse deskset (B)<br />
<br />
* '''CD Training''' <br />
** [http://www.cd-training.fr/?&feed=product&product_id=308 Wireless Combo Keyboard and Mouse (SolClavGlos)]<br />
<br />
* '''Cherry'''<br />
** CyMotion Master Linux (B)<br />
** RS 6000 USB ON<br />
** G84-4100PTMUS (B) (Compact keyboard. Rated 100mA. Works directly in Pi)<br />
<br />
* '''Compaq'''<br />
** Compaq Internet Keyboard KU-9978 (049f:000e). Rated 5v 100mA. Works directly connected to Pi<br />
<br />
* '''Das Keyboard'''<br />
** Model S Professional Keyboard (Built in USB hub not tested) (B)<br />
** Model S Ultimate Keyboard (Built in USB hub working) (B)<br />
<br />
* '''Dell'''<br />
** SK-8115 (B) (Rated 100mA. Works directly in pi)<br />
** L100 (B)<br />
** RT7D50 (75mA) (run "sudo dpkg-reconfigure keyboard-configuration")<br />
** KB1421 (100mA)<br />
** KB2521 (100mA)<br />
** 1HF2Y (Works directly in pi)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Delux'''<br />
** K8050<br />
<br />
* '''Digicom'''<br />
** WKEYPE01 Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
* '''Dynex'''<br />
** DX_-WKBD (60ma) (B)<br />
** DX_-WKBDSL (Hot keys not yet tested with Debian) (tested through non-powered 3 dongle usb hub) (B)<br />
<br />
* '''EAPPLY'''<br />
** EBO-013 Wireless 2.4GHz compact keyboard with touchpad. Rated <40mA works directly from Pi. eBay ref 260962010276 from Shenzen, China.<br />
<br />
* '''Emprex'''<br />
** Wireless Media Control Keyboard With Trackball 9039ARF III (Media functions untested)<br />
<br />
* '''Fujitsu Siemens''' <br />
** KB SC USB UK (!)<br />
** KB910 USB, with led light on the highest level (B)<br />
** KB400 USB US<br />
<br />
* '''GE''' <br />
** 98139 Rev.K1 (Power Keyboard) (lsusb shows it as "0b38:0010 Gear Head 107-Key Keyboard") - works without a hub (i.e. directly connected) (B)<br />
<br />
* '''Gear Head''' <br />
** KB3700TP (USB Mini Smart Touch Touchpad Keyboard) (B)<br />
** KB3800TP (Wireless Touch Mini Touchpad Keyboard with Smart Touch) (B)<br />
*** Works when plugged directly into Raspberry Pi, did not work with powered hub (could be a hub issue)<br />
** KB3800TPW (Windows Smart Touch Wireless Keyboard with Touchpad) (B)RASPBMC supported<br />
** KB4950TPW (Wireless Touch II Touchpad Keyboard) (B)<br />
** KB1500U (USB Mini Keyboard) (B)<br />
** KB5150 (2.4Ghz wireless keyboard/mouse Combo) (B)<br />
*** Works well with a powered hub<br />
<br />
* '''Genius'''<br />
** Ergomedia 700 (GK-04008/C) used without Hub<br />
** KB-06XE (K639) (B)<br />
** Slimstar 8000 wireless keyboard<br />
<br />
* '''HP'''<br />
** KG-1061<br />
** KG-0851 Wireless Keyboard and Mouse<br />
** KU-0316 (B)<br />
** LV290AA#ABA Wireless Keyboard and Mouse<br />
** PR1101U (available from Sainsbury's in the UK, £8, July 2012)<br />
** SK-2880<br />
<br />
* '''Hyundai'''<br />
** HY-K201<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Imation''' <br />
** KBD-702 Multi-media Wired Keyboard<br />
*** (works after the firmware update via [https://github.com/Hexxeh/rpi-update rpi-update] as of 06/27/2012)<br />
<br />
* '''IOGEAR'''<br />
** IOGEAR GKM561R Wireless HTPC Multimedia Keyboard with Trackball<br />
** IOGEAR GKM681R 2.4GHz Wireless Compact Keyboard with Optical Trackball and Scroll Wheel<br />
<br />
* '''iPazzPort'''<br />
<br />
* '''i.t.works'''<br />
** KC04 (direct and by usb hub)<br />
** KC Silicone (only tested directly)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''KeySonic'''<br />
** ACK-540RF (Wireless USB keyboard with built-in trackpad); works fine on Debian Squeeze plugged directly into Pi. Also works with Raspbmc with powered hub.<br />
** ACK-540RF+ (UK) WiFi keyboard inc touchpad with USB wifi dongle works fb with on model B/raspian/wheezy via powered hub<br />
** ACK-3700C<br />
** ACK-340U+(DE)<br />
** ACK-3400U (UK) mini keyboard<br />
<br />
* '''Labtec'''<br />
** [http://www.labtec.com/index.cfm/gear/details/EUR/EN,crid=28,contentid=692| Ultra-flat Keyboard]<br />
<br />
* '''Laptopmate'''<br />
** AK-98UNTN7-UBRII Laptopmate RII Touch N7 Mini Wireless Keyboard with touchpad<br />
<br />
* '''LC-Power<br />
** K1000BMW (lsusb: ID 1241:f767 Belkin; dmesg: HOLTEK Wireless 2.4GHz Trackball Keyboard) tested with Debian 6.0.4<br />
<br />
* '''Lenovo'''<br />
** SK-8825 UK (B)<br />
** Lenovo Enhanced Multimedia Remote with backlit keyboard N5902 (US)<br />
** Lenovo Mini Wireless Keyboard N5901 (US)<br />
<br />
* '''Lindy'''<br />
** 21840 (Wireless RF 2.4GHz Micro Keyboard with built-in optical touchpad/trackpad, USB); works fine on model B/raspian/wheezy - the supplied Lindy USB nano dongle transceiver plugged directly into Pi USB port.<br />
<br />
* '''Logik'''<br />
** Ultra slim keyboard LKBWSL11 (B) >> '''This is also listed under Problem USB Keyboards?'''<br />
<br />
* '''Logitech'''<br />
** Comfort Wave 450, labeled 100mA (M/N Y-U0001, P/N 820-001725, PID SC951C40001)<br />
** diNovo Mini wireless keyboard with media controls and clickpad 920-000586 (B)<br />
** diNovo Edge Keyboard, Windows edition, built-in TouchDisc track-pad, bluetooth w/ USB mini-receiver 967685-0403 (B)<br />
** Wii wireless keyboard KG-0802 (!)<br />
** C-BG17-Dual Wireless keyboard and mouse with wired USB receiver (B)<br />
** Deluxe 250 Keyboard<br />
** Internet 350 (M/N 967740-0403)<br />
** Internet Navigator Keyboard<br />
** MK120 wired keyboard and mouse<br />
** MK220 wireless keyboard and mouse<br />
** MK250 wireless keyboard and mouse (no hub needed)<br />
** MK260 wireless keyboard and mouse<br />
** MK300 wireless keyboard and mouse<br />
** MK320 wireless keyboard and mouse [http://www.amazon.co.uk/Logitech-920-002885-MK320-Wireless-Desktop/dp/B003STDQYW/ref=sr_1_3?ie=UTF8&qid=1339166178&sr=8-3]<br />
** MK350 wireless keyboard (using Unifying receiver)<br />
** MK520 wireless keyboard and mouse<br />
** MK550 wireless keyboard and mouse (B)<br />
** MX5000 Bluetooth keyboard and mouse (B) The Logitech Bluetooth dongle also does proprietary wireless so it works without Bluetooth drivers.<br />
** EX110 Cordless Desktop, wireless keyboard and mouse (B)<br />
** K120 Keyboard (B)<br />
** K200 Keyboard (B)<br />
** K230 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K340 Wireless Keyboard (Unifying receiver, no powered hub) (B)<br />
** K350 Wireless Keyboard (B)<br />
** K400 wireless keyboard with touchpad - also listed under "problematic". works for weeks with openelec and raspbian without any problems.<br />
** K520 Keyboard (B)<br />
** K700 Wireless Keyboard with Touchpad and unifying receiver<br />
** K750 Wireless Solar Keyboard (B) (Mac version works too. (B) )<br />
** LX 710 - works fine with receiver plugged directly into the RPi (accompanying mouse works fine too).<br />
** S510 wireless keyboard and mouse (B)<br />
** Ultra-Flat Keyboard (M/N Y-BP62A P/N 820-000245 PID SY126UK)labelled 100 mA. OK direct into Model B RPi.<br />
** G19 Gaming Keyboard, works fine with no external power. Illumination with external power. Powered hum in back of keyboard works too.<br />
** G15 Gaming keyboard, as long as you press the backlight button twice to turn off the backlight (it says below it dosen't work with backlight on.<br />
** V470 Bluetooth Laser Mouse<br />
<br />
''Keyboards and mice also together with Unifying receiver'' <br />
<br />
* '''Microsoft''' <br />
**Microsoft Comfort Curve Keyboard 2000<br />
**Microsoft Comfort Curve Keyboard 3000 for Business<br />
**Microsoft Digital Media Pro Keyboard Model : 1031 (Debian 13-Apr-2012)<br />
**Microsoft Natural Ergonomic Keyboard 4000 (B) (Debian "Wheezy" beta 18-June-2012)<br />
**Microsoft Wired Keyboard 600 Model 1366 (Debian 28-May-2012 on Production Model B)<br />
**Microsoft Wireless Desktop 700 Keyboard v2.0 (Raspbian Pisces image 08-June-2012 on Production Model B)<br />
**Microsoft Wireless Photo Keyboard (Model 1027) Unifying receiver, no hub<br />
**Microsoft Wireless Natural Multimedia Keyboard (Raspbian Pisces 08-July-2012) (B)<br />
**Microsoft Windows 2000 Keyboard (KB-USBK110610)<br />
**[https://www.microsoft.com/hardware/en-us/p/wired-keyboard-600/ANB-00001 Microsoft Wired Keyboard 600]. The keyboard is rated at 5v/100mA (Wheezy 5-Sept-2012)<br />
<br />
* '''Mikomi''' <br />
** Wireless Deskset KM80545 Keyboard and mouse (Works but range is terrible less than a metre) (B)<br />
<br />
* '''Monoprice'''<br />
** [http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10404&cs_id=1040401&p_id=6854&seq=1&format=2|Monoprice PS/2 To USB Adapter] Directly and through an unpowered hub with a USB mouse plugged in.<br />
<br />
* '''Motorola'''<br />
<br />
** Bluetooth wireless ultra slim keyboard and mouse combo (sold as for the "Atrix" phone) work in combination with the Technika Bluetooth adaptor listed below<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/desktopkits/nov-wcombo.html|Novatech Wireless Combo - Keyboard & Mouse, Nano adapter] (B)<br />
<br />
* '''ONN'''<br />
**ONN Keyboard Stock No: ONA11HO089 (from Walmart). Seems to work fine, even without a hub.<br />
**ONN Keyboard Stock No: ONA11HO087 (from Walmart). Combination keyboard and mouse package with nano receiver. Be sure to configure keyboard layout.<br />
<br />
* '''Perixx''' <br />
**Periboard 716 Wireless Ultra-Slim Keyboard with Touchpad (Debian 07-Jun-2012 on Production Model B)<br />
** PERIBOARD-502 wired keyboard inc built in touchpad (model B/raspian wheezy)<br />
** Periduo-707 Plus (Wireless Keyboard and Mouse) works fine ''most'' of the time. Does suffer from dropouts and glitches though. Usual "drawing too much power from USB" problems show up as well - dropped key presses or constant autorepeats. These can be cured by pulling out and reinserting the dongle in the USB socket. The keyboard sometimes hangs after power on when used with my laptop - it seems to need 30 seconds of non-use before it works fine. Again, remove and insert the dongle cures it. Works fine vi my Benq monitor's USB Hub.<br />
<br />
* '''Philips''' <br />
**Wired Multimedia Keyboard SPK3700BC/97 (Debian 19-Apr-2012 on Production Model B)<br />
<br />
* '''Prodige'''<br />
**Nanox Wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.riitek.com/product_Info.asp?id=56 Riitek RT-MWK01] and [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01]<br />
<br />
* '''Rapoo'''<br />
**Rapoo E9080 Wireless Ultra-Slim Keyboard with Touchpad<br />
**Rapoo Wireless Multi-media Touchpad Keyboard E2700 [http://www.rapoo.com/showdetails.aspx?P_No=E2700]<br />
**Rapoo Ultra-Slim Wireless Multimedia Keyboard and Mouse E9060 (works proper on powered USB Hub)<br />
<br />
*'''Riitek'''<br />
**RT-MWK03 mini wireless keyboard & trackpad<br />
**RT-MWK02+ mini bluetooth keyboard & trackpad. Followed instructions from this page: [http://www.ctheroux.com/2012/08/a-step-by-step-guide-to-setup-a-bluetooth-keyboard-and-mouse-on-the-raspberry-pi/] and it worked, connection persists across reboots, no problem with either builtin USB or powered USB hub.<br />
**RT-MWK01 mini wireless 2.4 Ghz Keyboard-mouse Combo, also known as [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/WKEYPE01 Digicom WKEYPE01], and [http://www.verkkokauppa.com/fi/product/52783 Prodige Nanox]<br />
<br />
*'''Rosewill'''<br />
** RK-200 Standard Keyboard<br />
<br />
*'''Saitek'''<br />
** Eclipse II Backlit Keyboard PK02AU (B)<br />
** Eclipse Backlit Keyboard PZ30AV (B)<br />
** Expression Keyboard (US) <br />
** Cyborg V.5 (B)<br />
<br />
*'''SelecLine'''<br />
** WK11P & WM11P-SP-PP. Keyboard and mouse set. (B)<br />
<br />
*'''SIIG'''<br />
** SIIG Wireless Multi-Touchpad Mini Keyboard 02-1286A v1.0 (B)<br />
<br />
*'''Silvercrest'''<br />
** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B) <br />
<br />
*'''SolidTek'''<br />
** Solid Tek KB-P3100BU ASK-3100U. <br />
<br />
*'''Sony'''<br />
** Keyboard for PlayStation 2 (PS2) Linux. Works without powered hub with 5v1A supply, requires manual keyboard remapping with Debian Squeeze to USA 101-key layout.<br />
<br />
* '''SteelSeries'''<br />
** Merc keyboard (B)<br />
<br />
* '''Sun Microsystems'''<br />
** Model: Type 7, SUN PN: 320-1348-02 (Danish key layout)<br />
** Model: Type 6, SUN PN: 320-1279-01 (Danish key layout)<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/keyboards/KB060UK/ KB060UK] Wired Multimedia Keyboard<br />
<br />
* '''Technika'''<br />
** WKEY03 (B)<br />
** TKD-211<br />
<br />
* '''Tesco'''<br />
** Value Keyboard VK109 (B)<br />
** Multimedia K211 Wired Keyboard (B)<br />
<br />
*'''The Pi Hut'''<br />
** Super Slim Apple Style Keyboard (from [http://thepihut.com/products/usb-keyboard-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Apple Style Keyboard Set (Keyboard & Mouse) (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust 17916 Compact Wireless Entertainment Keyboard http://www.trust.com/products/product.aspx?artnr=17916 (B)<br />
** Trust ClassicLine Keyboard http://trust.com/17184 <br />
** Trust Camiva MultiMedia Keyboard http://trust.com/products/product.aspx?artnr=16087<br />
** Trust Convex Keyboard http://trust.com/products/product.aspx?artnr=17603 tested debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
<br />
* '''Unbranded'''<br />
** AK-601 Wireless Mini Keyboard and Trackball (with laser pointer) - sourced from eBay Chinese seller<br />
<br />
* '''Unicomp'''<br />
** USB Endurapro - keyboard and trackpoint work perfectly from powered hub<br />
<br />
* '''Q-Connect'''<br />
** AK-808 (B)<br />
<br />
* '''Xenta'''<br />
** 2.4GHz Wireless Multimedia Entertainment Keyboard with Touchpad (B)<br />
** Mini Multimedia Keyboard (Model no.: 808M) (B)<br />
<br />
===Problem USB Keyboards===<br />
<br />
Note that generally PS/2 keyboards with an USB adapter will not work directly on a PI port, due to the fact that PS/2 keyboards are designed for normal 5V +-5% range, while USB keyboards must be designed to work with 4.4 Volt, and generally USB devices on the PI may receive less than 4.75 Volt. PS/2 + USB adapter keyboards might work behind a powered hub, which does provide the full 5.0V. Some of these keyboards work when running the latest raspbian but not when using the overclocked xbmc version of raspbmc, probably due to the overclocking drawing more voltage away from the rest of the support system devices.<br />
<br />
* '''A4 Tech'''<br />
** Model GL-6 USB Keyboard, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''Accuratus'''<br />
** Accuratus KYBAC100-101USBBLK causes kernel panic (rated 100mA). Tested with 1000mA cheap unbranded and Nokia 1200mA power adaptors.<br />
* '''Apple'''<br />
** [http://www.powerbookmedic.com/xcart1/images/D/apple-keyboard.jpg Apple Keyboard (109 keys) A1048]. Draws too much power and does not seem to work properly when plugged into a powered hub. <br />
*'''Argos'''<br />
** Argos Value Wired Keyboard causes kernel panic<br />
* '''Choidy'''<br />
** Identifiers from usb-devices: Vendor=1a2c ProdID=0002 Rev=01.10 Product=USB Keykoard (yes, 'Keykoard') causes kernel panic<br />
* '''Cit''' <br />
** KB-1807UB Causes kernel panic (Rated <200ma)<br />
* '''Dell'''<br />
** SK-8135 (B) (Rated 1.5A. Takes too much power from pi even when not used as USB hub. Symptom = repeated keystrokes)<br />
** SK-8115 causes kernel panic (rated 100mA) Debian 6-19-04-2012 (B)<br />
** Y-U0003-DEL5 Sticky / Non-responsive keys<br />
* '''Gear Head'''<br />
** KB2300U - Causes kernel panic (B)<br />
* '''GMYLE'''<br />
** Wired USB Slim Chocolate Multimedia Media Typing Keyboard With 3 USB Port hub (B) - Kernel Panic on startup if plugged in. If plugged in at login prompt then freeze. [http://www.amazon.co.uk/gp/product/B0067EC3GW/]<br />
* '''Inland''' <br />
** Inland USB Keyboard Model #70010<br />
* '''Jeway'''<br />
** JK-8170 "The Hunter" - causes kernel oops (Debian6-19-04-2012) (B)<br />
* '''Labtec'''<br />
** ultra-flat wireless desktop USB - Keyboard has 'sticky' keys. Tested both debian6-19-04-2012 and archlinuxarm-13-06-2012 (B)<br />
* '''Logik'''<br />
** Wired Multimedia Keyboard Model: LKBWMM11 - causes kernel panic (on Debian 190412 distro) (B)<br />
** Wired Ultra Slim Keyboard Model: LKBWSL11 - causes USB power issues. Not reliable. Causes other USB devices to fail (B) >> '''This is also listed under Working USB Keyboards??'''<br />
* '''Logitech'''<br />
** Logitech Illuminated Keyboard (unstable; not working with led light on; tested both US and NO layouts with both Apple iPad 2 and Asus TF-101 USB chargers)<br />
** G110 Gaming Keyboard - only works with illumination off, otherwise unresponsive. Once failed it needs reconnecting before another attempt. (B)<br />
** G15 Gaming Keyboard - LCD and key backlights flicker, 95% unresponsive to typing. I don't know of a way to turn the illumination off. (B)<br />
** K360 Wireless Keyboard - Occasional sticky keys. (B)<br />
** K400 wireless keyboard with touchpad (completely non-functional on debian6-19-04-2012)<br />
** G510 Gaming Keyboard - lagging or unresponsive keys.<br />
** MX5500 wireless keyboard and mouse with usb bluetooth reciever - Unstable, looses connection without prior notice<br />
** EX100 Cordless Desktop, wireless keyboard and mouse. Mouse and keyboard hangs every few minutes (with or without hub).<br />
* '''Microsoft''' <br />
** Wireless Desktop 800 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Entertainment Keyboard - No key input recognized (possibly connectivity issue as pairing devices does not seem to work)<br />
** Wireless Optical Desktop 1000 - Keyboard has 'sticky' keys (B)<br />
** Wireless Keyboard 2000 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Desktop 3000 - Keyboard has 'sticky' keys.<br />
** Arc wireless - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X4 - Keyboard has 'sticky' keys. (B)<br />
** Sidewinder X6 - Keyboard has 'sticky' keys. (B)<br />
** Wireless Comfort Keyboard 5000 - Keyboard has 'sticky' keys. (B)<br />
** Razer Reclusa - Keyboard has 'sticky' keys. (B rev 2.0)<br />
* '''Novatech'''<br />
** NOV-KEY2 - Causes kernel panic (B)<ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
* '''PC World Essentials'''<br />
** PKBW11 Wired Keyboard - no power to keyboard, no error messages on both Arch 29-04-2012 and Debian6-19-04-2012, same Pi works with Asda keyboard. Me too, but caused a kernel panic -- tested on powered hub and direct.<br />
* '''Razer'''<br />
** Razer Tarantula gaming keyboard - sticky keys, could be power issue as is programmable with host powered USB hub and audio jacks.<br />
** Razer BlackWidow - Sticky keys, could be a power related issue due to illuminated logo (Blue LED).<br />
* '''SIIG'''<br />
** Wireless Ultra Slim Multimedia Mini Keyboard JK-WR0612-S1 - Unresponsive and sticky keys.<br />
* '''Texet'''<br />
** MB-768B standard keyboard (Rated 5V 1.5A(!), so probably too much power drain. Kernel panic, Debian6-19-04-2012)<br />
* '''Trust''' <br />
** TRUST GXT 18 Gaming Keyboard - No power to keyboard, could be a driver issue - no error messages.<br />
* '''Unbranded'''<br />
** Compuparts<br />
** model no. HK-6106 (B) <ref>http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernal-panic/page-2</ref><br />
** LK-890 (Multimedia keyboard & Optical Mouse) - kernel panic on Debian Squeeze, ArchLinux and Qtonpi.<br />
* '''Verbatim'''<br />
** [http://www.amazon.com/gp/product/B004LB5AKY/ref=oh_details_o00_s00_i02|Verbatim 97472 Mini Wireless Slim Keyboard and Mouse] - Keyboard has lagging, unresponsive and sticky keys issues. (Tested with and without powered USB hub.)<br />
* '''Wilkinsons / TEXET'''<br />
** Model MB-768B causes kernel panic on debian6-19-04-2012.<br />
* '''Xenta'''<br />
** HK-6106 - causes kernel panic (on Debian 190412 distro)(B)<br />
** Multimedia Wireless Keyboard and Mouse Set (Keyboard Model: HK3518B + Mouse Model HM3301) (B) - occasional sticky keys, and occasional complete lock-up<br />
<br />
== USB Mouse devices ==<br />
USB mouse devices that present themselves as a standard HID (Human Interface Device) device should work, however some hardware requires special drivers or additional software, usually only compatible with Windows operating systems. <br />
<br />
===Working USB Mouse Devices===<br />
The following is a list of specific mouse devices known to work and which appear to be fault-free.<br />
<br />
* '''A4Tech'''<br />
** OP-530NU Padless Wired Mouse<br />
<br />
* '''Asda'''<br />
** HM5058 (Smart Price) Wired Mouse<br />
** Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)<br />
<br />
* '''ASUS'''<br />
** MS-511U (comes with Asus Vento KM-63 keyboard/mouse combo) (B)<br />
** MG-0919 (wireless)<br />
<br />
* '''Belkin'''<br />
**F8E882-OPT (B)<br />
<br />
* '''Dell'''<br />
** M-UVDEL1 (B)<br />
** M056U0A (B)<br />
** DZL-MS111-L (B) (100mA)<br />
** MS-111P (100mA)<br />
** Bluetooth Wireless Keyboard and Mouse Bundle (B), Bluetooth USB dongle C-UV35 (Rated 500mA but works great), Keyboard Y-RAQ-DEL2, Mouse M-RBB-DEL4<br />
<br />
* '''Dynex'''<br />
** DX-WMSE (100mA) (B)<br />
<br />
* '''Fellowes'''<br />
** 99928 USB Micro Track Ball (works without a hub, directly plugged in) (B)<br />
<br />
* '''Filand'''<br />
** OP-102i Mini Optical Mouse<br />
<br />
* '''Genius'''<br />
** GM-04003A (B)<br />
** Slimstar 8000 wireless mouse (Can be intermitent. Mouse pointer sometimes is irratic.)<br />
** Traveler 515 Laser<br />
<br />
* '''HP'''<br />
** MN-UAE96 (The basic stock HP wired mouse)(B)<br />
<br />
* '''iConcepts'''<br />
** 2.4GHz Wireless Keyboard and Optical Mouse Model 62550<br />
*** (saves a USB port since keyboard and mouse share one transceiver, $14.99 at Fry's Electronics)<br />
<br />
* '''Jenkins'''<br />
** Jenkins Wireless Desktop Set Blue (B)<br />
<br />
* '''Kensington'''<br />
** Kensington Expert Mouse Trackball K64325<br />
** Kensington Expert Mouse "Slimblade" K72327US<br />
<br />
* '''Labtec'''<br />
** Corded Laser Glow Mouse 1600, rated 5V 100mA (P/N 810-000819, M/N M-UAZ149, PID GT83401)<br />
<br />
* '''Lenovo'''<br />
** Wired Optical Mouse Model: MO28UOL<br />
<br />
* '''Logik'''<br />
** Wired Optical Glow Mouse Model: LGGMO10. (B)<br />
<br />
* '''Logitech'''<br />
** B105 Mouse for Laptops (OEM)<br />
** Cordless Pilot Optical Mouse M/N M-RR95 with Cordless Mouse Receiver M/N C-BA4-MSE<br />
** G5 Logitech Gaming Mouse (B)<br />
** G5v2 Logitech Gaming Mouse (B)<br />
** G500 Logitech Gaming Mouse (B)<br />
** G700 Logitech Wireless Gaming Mouse (B)<br />
** LX-700 Cordless Desktop Receiver (B)<br />
** LX 710 Wireless Mouse - works fine with receiver plugged directly into RPi (accompanying keyboard works fine too).<br />
** M90 optical mouse<br />
** M185 Wireless Mouse (B)<br />
** M210 (part of the MK260 set) (B)<br />
** M305 Wireless Mouse<br />
** M310 Cordless Mouse<br />
** M325 Wireless Mouse<br />
** M505 USB wireless laser, model no: 910-001324 (B)<br />
** M510 Wireless Mouse (B)<br />
** M705 Marathon Mouse (Unifying receiver, no powered hub) (B)<br />
** M-BD58 Wheel Mouse (B)<br />
** M-BJ58/M-BJ69 Optical Wheel Mouse (B)<br />
** M-BJ79 (B)<br />
** M-BT96a Optical Mouse<br />
** MX320/MX400 laser mouse (B)<br />
** MX518 Optical wheel mouse (B)<br />
** Optical USB Mouse (M/N 931643-0403)<br />
** Performance Mouse MX (B)<br />
** MX Revolution (B) (Debian "Wheezy" beta 18-June-2012)<br />
** VX Nano Cordless Laser Mouse for Notebooks<br />
** Wheel Mouse (M/N BJ58)<br />
<br />
* '''Medion'''<br />
** Mini mouse Model M101-CBJ P/N 40016632 S/N 7BFSA00003445 rated 5v 100ms Works fb on model B with raspian wheezy<br />
<br />
* '''Microsoft''' <br />
** Comfort Curve Mouse 3000 for Business<br />
** Comfort Mouse 6000 (works when directly connected to Pi (B). Does not work when connected through USB Hub (mouse pointer intermittent).<br />
** Compact optical mouse 500 V2.0 (B)<br />
** Wheel Optical Mouse (wheel and additional buttons not tested) (B)<br />
** Microsoft Intellimouse Optical Mouse<br />
** Microsoft Wireless Laser Mouse 8000<br />
** Microsoft Wireless Mobile Mouse 1000<br />
** Microsoft Wireless Mobile Mouse 3500<br />
** Microsoft Wireless Mobile Mouse 4000<br />
** Microsoft Wireless Mouse 700 v2.0<br />
** Microsoft Comfort Mouse 4500<br />
** Wireless IntelliMouse Explorer 2.0 (unifying receiver, no hub)<br />
<br />
* '''Novatech'''<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-mouser.html|Novatech M1 USB Mouse - Wired](B)<br />
** [http://www.novatech.co.uk/products/peripherals/miceandtrackballs/nov-dl10.html|Novatech DL10 Wireless Mouse] (B)<br />
<br />
* '''Razer'''<br />
** Boomslang Collectors Edition 2007 (B)<br />
<br />
* '''Rosewill'''<br />
** Rosewill RM-C2U<br />
<br />
* '''Saitek'''<br />
** Notebook Optical Mouse (PM46)<br />
<br />
* '''Samsung'''<br />
** Samsung model:AA-SM3PCPB usb Optical Mouse (draws 50mA) <br />
<br />
* '''Sun microsystems'''<br />
** Model: FID-638 , SunPN: 371-0788-01<br />
<br />
* '''Sweex'''<br />
** [http://www.sweex.com/en/assortiment/input/optical-mice/MI015/ MI015]<br />
<br />
* '''Swiftpoint'''<br />
** [http://http://www.americas.futuremouse.com/] Swiftpoint Mini Wireless Optical Mouse. Does not require any special drivers. Haven't confirmed if charging the mouse requires a powered USB hub or not.<br />
<br />
* '''Targus'''<br />
** AMU2701EUK (B)<br />
<br />
* '''Technika'''<br />
** TKOPTM2 (B)<br />
**TKD-211<br />
<br />
* '''Tesco'''<br />
** Wired optical mouse M211 (B)<br />
<br />
*'''The Pi Hut'''<br />
** USB Mouse for Raspberry Pi (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
** Super Slim Keyboard & Mouse Set (from [http://thepihut.com/products/usb-keyboard-mouse-bundle-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Trust'''<br />
** Trust Nanou Wireless Micro Mouse http://trust.com/products/product.aspx?artnr=17087<br />
<br />
* '''Verbatiam'''<br />
**Mini Nano Optical Mouse 97470 (wireless on non-powered 3 usb dongle hub) (B)<br />
<br />
* '''Xenta'''<br />
** MOW0810 (B)<br />
** Wired Optical Mouse (from [http://thepihut.com/products/usb-mouse-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''Generic'''<br />
** Generic 2.4GHz Wireless Mouse (ID 040b:2013 Weltrend Semiconductor) (B)<br />
<br />
===Problem USB Mouse Devices===<br />
The following is a list of specific mouse devices that have problems working with the Raspberry Pi<br />
* '''A4Tech'''<br />
** Model G7-630 Wireless Mouse, 20mA. Part of wireless keyboard/mouse bundle GL-6630 (GL-6 + G7-630 + RN-10B) - suffers from USB flakeyness. Even on a powered hub. No problems on other computers I have tested it with.<br />
* '''HP'''<br />
** HP Retractable Mobile Mouse (Optical) HP Product Number XP472AA - errors / boot loop RASPBMC (B)removed mouse, started with no further errors. <br />
<br />
* '''Logik'''<br />
** Logik IMF Blue Trace Wired USB mouse (Model LMWBLU11) - disconnects from the USB port every 20 seconds when using the Raspian distro. Always reconnects to the USB port successfully (B)<br />
<br />
* '''Logitech'''<br />
** Logitech G400 Gaming Mouse - 100% CPU load and laggy mouse cursor when the mouse is moved. MX518 works fine on the same setup, so I suspect it's a polling rate issue. [http://tech2.in.com/reviews/mice/logitech-g400-is-it-a-worthy-successor/231012 this] says the mouse is 1000Hz out of the box, whereas the 518 is only 125Hz. Solution found: add usbhid.mousepoll=8 to the kernel commandline.<br />
<br />
* '''Microsoft'''<br />
** Microsoft Touch Mouse - Does not see right clicks, Only left.<br />
<br />
* '''Razer'''<br />
** Naga Wired USB mouse - the mouse seems to present itself as a keyboard because the numpad on the left-hand side of the device works but the cursor doesn't move.<br />
<br />
* '''Roccat'''<br />
** Kone[+] Wired USB mouse - Nothing happens when moving the mouse, haven't looked further into the issue (B)<br />
<br />
* '''Trust'''<br />
** Optical USB Mouse MI-2250 - Nothing happens when moving the mouse (B)<br />
<br />
* '''Xenta'''<br />
** Multimedia Wireless Keyboard and Mouse Set (Mouse Model: HM-3301) (B) - frequent lost connection giving stuttering mouse cursor indicating USB current not enough for dongle<br />
<br />
== USB Real Time Clocks ==<br />
*Cymbet<br />
** Cymbet CBC-EVAL-06 USB Real Time Clock (FT2232 to SPI to RV-2123)<br />
Device information at http://www.cymbet.com/pdfs/DS-72-22.pdf<br />
Code to access the RTC from Linux: https://github.com/owendelong/Cymbet-RTC<br />
Does not require a powered hub.<br />
<br />
== USB WiFi Adapters ==<br />
<br />
See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing<br />
<br />
There is a howto on installing the TL-WN722N adapter [http://elinux.org/RPi_Peripherals#Wireless:_TP-Link_TL-WN722N_USB_wireless_adapter_.28Debian_6.29 here], which also acts as a guide for installing others too.<br />
<br />
===Working USB Wifi Adapters===<br />
<br />
These adapters are known to work on the Raspberry Pi. This list is not exhaustive, other adapters may well work, but have not yet been tried.<br />
<br />
'''Note:''' A WiFi adapter will probably need more power than the Raspberry Pi USB port can provide, especially if<br />
there is a large distance from the WiFi adapter to the WiFi Access Point. Therefore, you may need to plug the WiFi adapter into a powered USB hub.<br />
<br />
* '''3COM'''<br />
** 3CRUSB10075: ZyDAS zd1211rw chipset (!)<br />
<br />
* '''7DayShop'''<br />
** W-3S01BLK, W-3S01BLKTWIN : Unbranded product available from 7DayShop, in a single or twin pack. [http://www.7dayshop.com/catalog/product_info.php?cPath=777_9&products_id=112046], [http://www.7dayshop.com/catalog/product_info.php?&products_id=112527]. Tested on Debian Wheezy, with the dongle attached directly to the RPi along with the wireless keyboard receiver. Shows up as a Ralink RT5370 device, and no drivers or additional software downloads required. Created wpa.conf, edited 'interfaces' file and restarted the networking. The manufacturer portion of the MAC address (7cdd90) is assigned to "Shenzhen Ogemray Technology Co., Ltd."<br />
** It works without additional software connected directly to a Rev 2 Pi but stops working after a period of time (3 to 4 hours) with a fully updated Wheezy and all the 'USB workarounds' [http://elinux.org/Rpi_USB_check-list] in place. <br />
<br />
* '''Alfa'''<br />
** AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware package)<br />
** AWUS036NH: Tested on Arch Linux ARM using the rt2800usb module.<br />
** AWUS036NH: Tested on Debian Wheezy (with Ralink firmware package). Tested on Raspbian too (drivers from aircrack-ng).<br />
** AWUS036H (500mW version): Tested on Raspbian (drivers from aircrack-ng).<br />
** AWUS036H (1W version): Tested on Raspbian (drivers from aircrack-ng). Needs USB powered HUB or Rev2 of the board / polyfuse bypass.<br />
** AWUS036NHA: Tested on Raspbian (drivers from aircrack-ng). Works fine if connected after boot, otherwise Raspberry Pi won't boot up.<br />
<br />
* '''AirLink101'''<br />
** AWLL5088: Tested on Debian Wheezy. This adapter is based on the OEM Edimax EW-7811Un. For automatic installation, See MrEngmanns script listed below under the Edimax device.<br />
<br />
* '''Asus'''<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N10] USB ID 0b05:1786, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B) (not needed with latest Raspbian “wheezy” 2012-07-15: this Asus works N10 out of the box) Does not support nl80211 APIS, so hostapd won't work.<br />
** [http://www.element14.com/community/docs/DOC-44703 USB-N13] USB ID 0b05:17ab, works with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1 image] as it includes kernel [http://www.element14.com/community/message/57635#57660 with 8192u driver built-in] (B)<br />
** WL-167G v1 USB ID 0b05:1706, Ralink RT2571 working out-of-the-box on Debian image from 2012-04-19. Requires powered hub, otherwise it is detected by OS but will not function.<br />
<br />
* '''Belkin'''<br />
** Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]. On Debian requires the firmware-ralink package from the non-free repository. The usbcore module needs to be added to /etc/modules [http://www.penguintutor.com/blog/viewblog.php?blog=6281 install instructions].<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Tested on OpenELEC (works OOB), RaspBMC (works OOB), Raspian - 2012-07-15-wheezy-raspbian (followed [http://forum.xbian.org/viewtopic.php?f=7&t=29 instructions here]) '''Powered hub required!'''<br />
** Belkin Components F5D8053 ver.6001 Wireless N Adapter [Realtek RTL8188SU]. Works on RaspBMC OOB (with NetworkManager plugin). Works WITHOUT powered hub on 5v 800mA power with 6 overvolt (nothing else connected to USB)<br />
** Belkin Components F7D1101 v1 Basic Wireless Adapter [Realtek RTL8188SU] USB ID 050d:945a, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian and install firmware-realtek from non-free squeeze repo (B)<br />
**Belkin Components F6D4050 V1 [Realtek RT3070] USB ID: 050d:935a Driver: RT3572STA(recommended),RT2800USB,RT2870STA. Tested under Arch using [https://wiki.archlinux.org/index.php/Setting_Up_Belkin_F6D4050_Wireless_USB_Dongles this] guide.<br />
**Belkin Components F6D4050 V1/V2 [Realtek RT3070] USB ID: 050d:935a / 935b Driver: RT3572STA. Tested with Raspbian - See [http://iggy82.blogspot.co.uk/2012/08/wireless-n-raspberry-pi-belkin-f6d4050.html installation instructions] - Powered hub not required!<br />
** Belkin Components F7D2102 "N300" Micro Wireless USB adapter. Tested with Occidentalis 0.1. Tested and working on Rasbian wheezy (and RaspBMC), driver RTL8192CU, no powered hub needed (dongle directly attached to the onboard ports)<br />
** Belkin Components F9L1001v1 "N150" Wireless USB Adapter. Tested and working on Rasbian wheezy WITHOUT powered hub. <br />
** Belkin Surf Micro WLAN USB-Adapter (Raspbian Wheezy, unpowered hub, "N150")<br />
<br />
* '''BlueProton'''<br />
** [http://www.element14.com/community/docs/DOC-44703 BT3] USB ID: 0bda:8187; tested on Debian, Fedora & Arch; rtl8187 driver (B)<br />
<br />
* '''Buffalo'''<br />
** USB ID: 0411:01A2 WLI-UC-GNM - Tested on Raspbmc; rt2800usb driver <br />
<br />
* '''Conceptronic'''<br />
** C300RU. Works out of the box in Raspbian. Causes reboot when plugging on a live Rev. 2 RPi<br />
<br />
* '''Conrad'''<br />
** WLAN Stick N150 mini. Works out of the box in OpenELEC, [http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/ requires firmware-realtek and r8712u kernel module on Debian].<br />
** WLAN Stick N150 Nano [Realtek RTL8188CUS]. Requires a powered USB hub. See Micronet SP907NS for installation instructions and script.<br />
<br />
* '''DIGICOM'''<br />
** USBWAVE54 [chipset Zydas ZD1211] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave54]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with zd1211-firmware . <br />
** USBWAVE300C [chipset Ralink 2870] . [[http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/UsbWave300c]] Works out of the box in OpenELEC. With Raspbian or Debian squeezy/wheezy works with firmware-ralink . <br />
<br />
* '''D-Link'''<br />
** AirPlus G DWL-G122 (rev. E). USB ID 07d1:3c0f, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository. (However I experience total crashes on raspbian 2012-07-15 after a few minutes of load on the wlan. Will have to investigate via serial console.)<br />
** AirPlus G DWL-G122 (rev. C). USB ID 07d1:3c03, Ralink RT2571. Working out-of-the-box on Arch image from 2012-04-29.<br />
** AirPlus G DWL-G122 (rev. B1). USB ID 2001:3c00, Ralink RT2571. Working out-of-the-box on Arch image from 2012-06-13.<br />
** DWA-110 (Version A1). Requires the ralink package from the non-free repository on Debian.<br />
** DWA-121 (Version A1). Wireless N 150 Pico. Works out-of-the-box with Raspian Wheezy (2012-09-18)<br />
** DWA-123 (Version A1). USB ID 2001:3c17, Ralink RT2800. Working out-of-the-box on Arch image from 2012-04-29. (working without UBS Hub - not yet sure if it achieves full speed though.)<br />
** DWA-131 USB ID 07d1:3303,Realtek RTL8192SU, 802.11n Wireless N Nano. Works out of the box on Raspbian “wheezy”. Verified with direct USB : no powered USB hub needed. Also verified when Nano used in powered USB hub. Someone had trouble configuring SSID/Passphrase in etc/network/interfaces file. But no problem & very easy to configure using wicd : wicd is a gui interface on LXDE for network configuration. Install it using command-line : <code>apt-get install wicd</code>. Once configured ith wicd to auto-run on boot, no need to turn back to LXDE. Recommended.<br />
** DWA-140 (Version B1). USB ID 07d1:3c09, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-140 (Version B2). USB ID 07d1:3c0a, Ralink RT3072. Workaround for faulty firmware binary: Place file rt2870.bin from [https://launchpad.net/ubuntu/oneiric/+source/linux-firmware/1.53/+files/linux-firmware_1.53.tar.gz linux-firmware_1.53.tar.gz] in /lib/firmware. [https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/770232 Explanation].<br />
** DWA-160 (Version B1). USB ID 07d1:3c11, Ralink RT2870. On Debian requires the <code>firmware-ralink</code> package from the <code>squeeze-firmware</code> non-free repository.<br />
** DWA-160 (Version A2). USB ID 07d1:3a09, Atheros AR9170. (NOTE: I can only get it to work through powered USB hub) requires carl9170-fw firmware [http://http://aur.archlinux.org/packages.php/packages.php?ID=44102]<br />
<br />
* '''Edimax'''<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] USB ID 7392:7811, RTL8192CU, driver blob [http://www.electrictea.co.uk/rpi/8192cu.tar.gz download] via [http://www.element14.com/community/docs/DOC-44703 Element14], works with WPA2-AES-CCMP ([http://www.ctrl-alt-del.cc/2012/05/raspberry-pi-meets-edimax-ew-7811un-wireless-ada.html howto]) (B) - [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Alternative driver download link that works with Raspian]<br />
** The EW-7811Un can be powered directly from the Raspberry Pi if the Raspberry Pi is powered using a well regulated power supply.<br />
** A script-based installation for the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] by MrEngman can be found [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=26&t=6256&hilit=edimax on the RasPi forums]. Tested with Debian Squeeze and Raspbian. [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt An installation guide can be found here.]<br />
** Instructions for getting the [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] working in Raspbmc (tested RC3) can be found [http://forum.stmlabs.com/showthread.php?tid=780 here].<br />
** Simple step-by-step instructions for [http://www.edimax.co.uk/en/produce_detail.php?pd_id=328&pl1_id=1&pl2_id=44 EW-7811Un] which uses the RTL8192 chipset [[RPi_edimax_EW-7811Un]](B)<br />
** [http://www.edimax.com/en/produce_detail.php?pd_id=8&pl1_id=1&pl2_id=44 EW-7318USg] USB ID 148f:2573, rt73usb. RT2573 chipset. Works with powered usb-hub or shorted polyfuses.<br />
** [http://www.edimax.co.uk/en/produce_detail.php?pd_id=261&pl1_id=1&pl2_id=44 EW-7711UAn], Ralink RT2870, works perfectly on Arch with a powered hub (not tested without yet). Simply required wireless_tools and wpa_supplicant, the drivers/firmware are included in kernel 3.0. I followed the Arch [https://wiki.archlinux.org/index.php/Wireless_Setup Wireless Setup] instructions.<br />
<br />
* '''edup'''<br />
** [[http://www2.buyincoins.com/details/usb-150m-wifi-wireless-lan-network-card-adapter-antenna-product-1916.html Edup 150MBPS wifi adapter]] USB ID: 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to install the firmware as rt2870.bin in /lib/firmware.([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) (B)<br />
** [http://www.szedup.com/show.aspx?id=1681 edup nano EP-N8508] Use method shown [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=7471&p=91736 here] for debian. Requires powered USB hub for adequate power. When directly powered by Pi, it fails after a few minutes. (B) Unusable with analog audio because when data is being send or recieved the audio get disorted.<br />
<br />
* '''Eminent'''<br />
** EM4575 - rt2800usb driver.<br />
<br />
* '''EnGenius'''<br />
** EUB9603 EXT - Realtek r8712u driver <br />
<br />
* '''Gigabyte'''<br />
** Gigabyte GN-WB32L 802.11n USB WLAN Card. Works with the rt2800usb driver.<br />
<br />
* '''GMYLE'''<br />
** Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.<br />
<br />
* '''IOGear'''<br />
** [http://www.element14.com/community/docs/DOC-44703 GWU625] USB ID 0bda:8172, r8712u staging driver, included on Fedora Remix & Arch, must [http://www.element14.com/community/servlet/JiveServlet/download/44948-8-97488/r8712u_ko.zip download] for Debian Squeeze and install firmware-realtek from non-free squeeze repo. No need to download firmware when using Debian Wheezy (B)<br />
<br />
* '''Linksys'''<br />
** Linksys (Cisco) WUSB100 ver.2 1737:0078, tested on raspbian; follow [http://www.brucalipto.org/linux/the-raspberry-diary-wusb100-wireless-n/ Brucalipto.org] instructions; not stress tested but works without issues for light network load.<br />
** Linksys (Cisco) WUSB600N, test on raspbian, details [http://elibtronic.ca/content/20120731/raspberry-pi-part-1-wifi-support here]<br />
<br />
* '''LogiLink'''<br />
** Wireless LAN USB 2.0 Nano Adapter 802.11n LogiLink [http://www.logilink.eu/showproduct/WL0084B.htm] is working even usb powered.<br />
<br />
* '''Micronet'''<br />
** Micronet SP907NS, 11N Wireless LAN USB Adapter (uses Realtek RTL8188CUS) works plugged directly into R-Pi USB (B) [http://dl.dropbox.com/u/80256631/install-rtl8188cus.txt Debian installation instructions] IMPORTANT: read the instructions first to avoid problems, and [http://dl.dropbox.com/u/80256631/install-rtl8188cus-latest.sh Auto-install script]. The script has been used to install other adapters using the RTL8188CUS chip. [http://dl.dropbox.com/u/80256631/8192cu-latest.tar.gz Updated driver] that handles the latest rpi-updates that kill the original driver, download for manual installation, automatically installed by the Auto-install script.<br />
<br />
* '''MSI'''<br />
** 0db0:6861 MSI-6861 802.11g WiFi adapter (US54G): works with external powered USB hub, requires firmware from [http://sourceforge.net/projects/zd1211/files/zd1211-firmware/ here], power management must be disabled: <code>iwconfig wlan0 power off</code><br />
<br />
* '''Mvix'''<br />
** Mvix Nubbin (MS-811N): works out of the box on Raspbian "wheezy" and does not need a powered USB hub.<br />
<br />
* '''Netgear''' <br />
** N150: Reported as WNA1100 device, uses the Atheros ar9271 chipset. On Debian, requires the <code>firmware-atheros</code> package from the <code>squeeze-backports</code> non-free repository (!)<br />
** N150: Some versions reported as Realtek RTL8188CUS device. Read Micronet entry above and use RTL8188CUS script for installation. Works best plugged into powered USB hub.<br />
** WG111v1: Prism54 chipset. Needs powered hub. Follow info for Prism54 chipset on Debian wiki.<br />
** WG111v2: Realtek rtl8187 chipset (!)<br />
<br />
* '''OvisLink'''<br />
** Evo-W300USB: USB ID 148f:2270 Ralink Technology RT2770. apt-get install firmware-ralink<br />
<br />
* '''Patriot Memory'''<br />
** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered usb hub.<br />
** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module<br />
<br />
* '''Ralink'''<br />
** inner 02 joggler wifi usb RT2770F USB-ID 148f:2770 (firmware-ralink required) (only got dhcp on powered hub)<br />
** [http://www.dx.com/p/24688 RT2070] USB-ID 148f:2070 firmware is already loaded into Raspbian. For Debian, the firmware must be installed ([http://wiki.debian.org/rt2870sta instructions]). Needs a powered USB hub.<br />
** [http://www.element14.com/community/docs/DOC-44703 RT2501/RT2573] USB-ID 148f:2573 (firmware-ralink required) (B)<br />
** RT5370 USB-ID 148f:5370 ([http://raspberry-pi-notes.blogspot.com/2012/05/rt5370-cheap-micro-usb-wireless-dongle.html requires firmware-ralink from wheezy]) [[RPi_Ralink_WLAN_devices]](B). An image of an adapter with this chip can be found [http://i.imgur.com/wRF7L.jpg here].<br />
<br />
* '''Rosewill'''<br />
** RNX-N180UBE Wireless B/G/N Adapter<br />
*** Realtek RTL8191SU chipset, USB-ID 0bda:8172<br />
*** Tested in Arch, works out of box. Powered USB hub required.<br />
*** Tested in Raspbian, used wicd to configure network settings. Powered USB hub Required.<br />
*** Tested in Raspbmc. Needs package firmware-realtek and used wicd-curses to configure. Powered USB hub required<br />
** RNX-G1 Wireless B/G Adapter<br />
*** Realtek RTL8187 chipset, USB-ID 0bda:8187<br />
*** Tested in Arch, works out of box. USB hub required.<br />
** RNX-MiniN1 (RWLD-110001) Wireless-N 2.0 Dongle (Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter)<br />
*** Tested in Raspbian, powered from USB hub.<br />
<br />
* '''Sagem'''<br />
** Sagem Wireless USB stick XG-760N : USB ID 079b:0062, Module is not shipped in Debian image, but can be "sudo apt-get install zd1211-firmware"<br />
<br />
* '''Sempre'''<br />
** Sempre Wireless USB stick WU300-2: USB ID 0bda:8172, Realtek r8712u driver + firmware-realtek package. Module is shipped in Raspbian image. If you need to build it for other distros, read this: http://www.t3node.com/blog/sempre-wireless-usb-stick-wu300-2-on-raspberry-pi/<br />
<br />
* '''SL'''<br />
** SL-1507N: USB 802.11n 150M WiFi Wireless Lan Network Card Adapter SL-1507N Black<br />
*** I bought this on on eBay for $4.19 (free shipping) @ http://www.ebay.com/itm/270853614804?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_4379wt_1199<br />
*** It worked out of the box on Raspbmc RC4, with the network manager add-on; seems to be an rt2800usb<br />
*** dmesg output "usbcore: registered new interface driver rt2800usb"<br />
<br />
* '''SMC'''<br />
** SMCWUSBS-N : Hardware detected as rt2800 but missing firmware; "sudo apt-get install firmware-ralink" fixed it<br />
** SMCWUSB-G : Gives "couldn't load firmware" error. "sudo apt-get install zd1211-firmware" fixes it.<br />
<br />
* '''Sony'''<br />
** Sony UWA-BR100 802.11abgn Wireless Adapter [Atheros AR7010+AR9280] (Vendor ID: 0411, Product ID: 017f) - Tested with Raspbian. Needs package firmware-atheros.(B)<br />
<br />
* '''Tenda''' <br />
** USB 11n adapter on a G network: Ralink 2870/3070 driver (!)<br />
** Tenda W311U Mini 11N Wireless USB Adapter (USB-ID 148f:3070): Ralink 2870/3070 driver; needs powered hub. [http://blog.modmypi.com/2012/06/installing-tenda-w311u-mini-wireless.html Debian installation instructions]<br />
** Tenda W311U+ Wireless USB Adapter - Tested with Raspian.<br />
<br />
*'''The Pi Hut'''<br />
** USB 802.11n WIFI adapter (from [http://thepihut.com/products/usb-wifi-adapter-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''TP-Link'''<br />
** TL-WN422G v2 (ath9k_htc) Works OOTB in Debian Wheezy Beta. Runs without powered Hub when plugged into running RasPi, but the RasPi won't boot while the stick is plugged in.<br />
** TL-WN721N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B) | works OOTB with wheezy raspbian (2012-08-16) connected directly to raspberry pi (B) and AP functionality tested with hostapd.<br />
** TL-WN722N (ath9k_htc device with htc_9271.fw file from http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw); needs powered USB Hub (B)<br />
** TL-WN821N v3 (ath9k_htc, htc_7010.fw); works out of the box on ArchLinuxARM and on OpenElec (>r11211), Problems with prior OpenElec; needs powered USB Hub (B) <br />
<br />
* '''Trendnet'''<br />
** [http://www.wikidevi.com/wiki/TRENDnet_TEW-648UBM TEW-648UBM] USB ID: 20f4:648b, works OOTB with [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/ Adafruit Occidentials Raspbian Wheezy variant] as it includes kernel with [http://www.wikidevi.com/wiki/Special:Ask?title=Special%3AAsk&q=%5B%5BChip1+model%3A%3ARTL8188CUS%5D%5D&po=%3FInterface%0D%0A%3FFCC+ID%0D%0A%3FVendor+ID%0D%0A%3FDevice+ID%0D%0A%3FChip1+model%0D%0A%3FSupported+802dot11+protocols%0D%0A%3FMIMO+status%0D%0A%3FOUI%0D%0A&sort_num=&order_num=ASC&eq=yes&p%5Bformat%5D=broadtable&p%5Blimit%5D=500&p%5Bsort%5D=&p%5Boffset%5D=&p%5Bheaders%5D=show&p%5Bmainlabel%5D=&p%5Blink%5D=all&p%5Bsearchlabel%5D=&p%5Bintro%5D=&p%5Boutro%5D=&p%5Bdefault%5D=&p%5Bclass%5D=sortable+wikitable+smwtable&eq=yes RTL8188CUS driver built-in] (B)<br />
<br />
* '''Widemac'''<br />
** RT5370 Wireless Adapter from [http://www.ebay.co.uk/itm/180887771838?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Ebay] runs without powered hub. Follow these [http://elinux.org/RPi_Ralink_WLAN_devices instructions] but go to [http://ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/ ftp.de.debian.org/debian/pool/non-free/f/firmware-nonfree/] and pick the latest firmware-ralink_0.xx_all.deb<br />
<br />
* '''ZyXEL'''<br />
** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)<br />
<br />
===Problem USB Wifi Adapters===<br />
<br />
These adapters were tested and found to have issues the Raspberry Pi. Note [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=6928] as a possible solution/explanation for errors while running LXDE.<br />
<br />
* '''Alfa'''<br />
** AWUS036NHA (Vendor ID: 0cf3, Product ID: 9271) - Tested with Raspbian. Works fine if connected after boot. Kills boot process if previously attached. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=16809&p=169469#p169469 Details here.]<br />
<br />
* '''EDIMAX'''<br />
** EW-7811Un (Vendor ID: 7397, Product ID: 7811) - Reports as containing the Realtek RTL8188CUS chipset listed below, no lockup or kernal oops under wheezy but dmesg reports constant timeouts trying to initialize the module.<br />
<br />
* '''Linksys'''<br />
** WUSB300N (Vendor ID: 13B1, Product ID: 0029) - Tested with Raspbian, OpenELEC, among others. No Linux chipset support for Marvell 88W8362 at all.<br />
<br />
* '''LogiLink'''<br />
** WL0085 tested under debian (squeeze, wheezy, raspbian); no stable connection can be established. This gets even worse when X is running.<br />
<br />
* '''MicroNEXT'''<br />
** MN-WD152B (Debian image) modprobe hangs when plugged in, lsusb hangs. udevd errors in the logs. [http://www.element14.com/community/thread/17632] [http://www.raspberrypi.org/phpBB3/viewtopic.php?t=6737]<br />
*** Possible fix: try the new [http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-1 Adafruit Occidentalis v0.1] image (based on Raspbian Wheezy) as it includes the needed 8192cu driver builtin to the kernel<br />
<br />
* '''Netgear'''<br />
** WNDA3100v2 tested with debian (wheezy); no driver for broadcom chipset (see [http://www.wikidevi.com/wiki/Netgear_WNDA3100v2 http://www.wikidevi.com/wiki/Netgear_WNDA3100v2]).<br />
<br />
* '''Realtek'''<br />
** RTL8188CUS USB-ID 0bda:8176, kernel oops in dmesg and freeze when pulled from USB. (B)<br />
<br />
* '''Trendnet'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TEW-424UB] USB ID: 0bda:8189; tested on Debian, Fedora & Arch; rtl8187 driver; errors with LXDE running (B)<br />
<br />
* '''TP-Link'''<br />
** [http://www.element14.com/community/docs/DOC-44703 TL-WN821N] USB ID: 0cf3:7015; tested on Debian; requires [http://linuxwireless.org/download/htc_fw/1.3/htc_7010.fw htc_7010.fw] firmware; ath9k_htc driver; errors with LXDE running (B)<br />
** TL-WN723N USB ID: 0bda:8176; tested on Arch without a powered hub; it seems to draw too much current.<br />
<br />
== USB Bluetooth adapters ==<br />
===Working Bluetooth adapters===<br />
* Asus USBIA-EG (paired with Asus Blutooth Keyboard/Media Center Remote<br />
** Verified works error-free in XBMC. Text echo problems exist in Raspbian<br />
* Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) - (USB ID 0a12:0001)<br />
** Example of above is; TOPDIGI UA01 Bluetooth USB Dongle Plug and Play (install bluez package from std repos)<br />
** Tesco own brand 'Technika' Nano Bluetooth Adaptor has the Cambridge Silicon Radio chipset and works fine, cost £5.97 at time of posting.<br />
** Hama USB Bluetooth 3.0 adapter (Class 1) ~£10 on amazon.co.uk.<br />
** Another sample: Product ID: 0a12:0001, pictured here: http://www.element14.com/community/message/58288<br />
** RiiTek RT-MWK02+ - comes with a usb bluetooth adapter that works perfectly for both the RiiTek mini bluetooth keyboard/mouse and other bluetooth devices. Tested both on builtin USB and on powered USB hub. There are other RiiTek bluetooth (and non-bluetooth wireless) devices on the working list. Bluetooth adapter shows up in lsusb as "0a12:0001 Cambridge Silicon Radio" - this is notable as most other sources of this chipset do not seem to be available in the US.<br />
* D-Link DBT-122, with ID 07d1:f101, using a Broadcom chip<br />
** http://www.element14.com/community/message/58288<br />
* IOGear GBU321 (Broadcom BCM2045 Chipset)<br />
** Works with Raspbian Wheezy directly attached to Pi and via powered USB hub.<br />
* Trust BT-2400p<br />
** Working well with Raspbian Wheezy directly attached to Pi. Using with sma-bluetooth (SMA Solar Inverter reading software).<br />
<br />
===Problem Bluetooth adapters===<br />
* '''Belkin'''<br />
** Belkin F8T017. Tested with Raspbian 2012-07-15 and bluez installed with apt-get. When dongle is inserted into Pluscom powered USB hub, my remote PuTTY session scrolls incredibly slowly (testing with ls -R to generate text). Suspect network issue. Lots of errors on dmesg too. Pi itself is responsive when using directly. On removal of the device everything goes back to normal.<br />
* '''Generic'''<br />
** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.<br />
* Asus USB-BT211<br />
** Shows up as HCI device in Raspbian, but does not scan or pair.<br />
** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962<br />
<br />
== USB Ethernet adapters ==<br />
===Working Ethernet adapters===<br />
* '''Wintech'''<br />
** USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver. Probably needs more than 100 mA current. [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=46&t=8708#p106136]<br />
* '''LogiLink'''<br />
** USB 2.0 UA0144: AX88772 chipset using the asix kernel driver. Tested only on powered USB hub so far.<br />
** LogiLink Fast EN USB 2.0 to RJ45 Adapter: Test on wheezy-Raspian (2012-08-16) without USB Hub will be confirmed<br />
lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter <br />
* '''Apple'''<br />
** Apple USB Ethernet Adapter using asix kernel driver. Works out of the box on Raspbian, haven't tested on any other OS.<br />
* '''Edimax'''<br />
** Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Works out of the box. Needs its own power source.<br />
* '''A-Link'''<br />
** A-Link NA1GU Gigabit USB 2.0 ethernet adapter<br />
This adapter works, but (probably) requires a bit of work. The driver for the chipset (Asix AX88178) included with the Raspbian kernel (v 3.1.9+ Aug 7 2012) does '''not''' work. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. :-( In order to make it work you need to download the latest driver from [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=84;71;100&PLine=71 the chipset manufacturer]. The version I used was "Linux kernel 3.x/2.6.x Driver" v4.4.0, released 2012-05-18. Fortunately this is GNU GPLv2 -licenced source code and not a binary blob, so compiling it for the Raspberry Pi is perfectly doable. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. >:-( Fortunately there is [https://www.grendelman.net/wp/compiling-kernel-modules-for-raspbian-raspberry-pi a very useful guide] for how to get the sources from github, and preparing that source so that you can compile modules. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make && sudo make install". Reboot and you should have a fully working ethernet adapter.<br />
<br />
The adapter seems to work without a powered USB hub, but according to the specifications it can draw up to 190 mA, so there might be stability issues if additional power is not provided.<br />
<br />
===Problem Ethernet adapters===<br />
* Axago<br />
** Axago ADE-X1 10/100 Ethernet Adapter (usb: 9710:7830 driver:mcs7830). Adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. Needed to unplug and plug USB again. Tested with and without powered USB hub.<br />
<br />
== USB Sound Cards ==<br />
You will usually want the <code>alsa</code> package for sound. In the Debian image for Raspberry Pi (and possibly other distributions) USB sound cards are prevented from loading as the first sound card, which can be an annoyance if it's the only device you have. To disable this behaviour edit <code>/etc/modprobe.d/alsa-base.conf</code> and comment out the last line; <code>options snd-usb-audio index=-2</code> . If you are not user ''pi'' you may need to add your username to the ''audio'' group thus: <code>sudo adduser yourusername audio</code> (user ''pi'' usually belongs to this group anyway).<br />
<br />
* '''Creative'''<br />
** [http://asia.creative.com/products/product.asp?category=1&subcategory=207&product=17892 Sound Blaster Play!]<br />
* '''Daffodil'''<br />
** [http://www.amazon.co.uk/gp/product/B002FI7GWK/ref=oh_details_o03_s00_i00 USB Sound Adaptor US01] ('''NB:''' Headphone output only checked so far, some notes on progress etc. can be found at [http://www.cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor.html cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/DaffodilUSBSoundAdaptor] - 14.09.2012)<br />
* '''Edirol'''<br />
** [http://www.roland.com/products/en/UA-1A/ UA-1A]<br />
* '''Hercules'''<br />
** [http://www.hercules.com/fr/Cartes-Son/bdd/p/123/gamesurround-muse-xl-pocket-lt3/ Gamesurround Musel XL (Pocket LT3)]<br />
* '''Logilink'''<br />
** [http://www.logilink.de/showproduct/UA0053.htm?seticlanguage=en UA0053 USB Soundcard with Virtual 3D Soundeffects LogiLink]<br />
* '''Terratec'''<br />
** [http://www.terratec.net/fr/produkte/Aureon_Dual_USB_12339.html Aureon Dual USB]<br />
<br />
==USB 3G Dongles==<br />
* Huawei E173<br />
* Huawei E220<br />
* Huawei E160 (AT commands only)<br />
* Franklin U600 from Sprint / VirginMobile<br />
** Use usb_modeswitch and vendor 0x1fac and product 0x0150/0x0151<br />
* Digicom Internet Key 7.2 HSUPA '''MU372-L01''' [http://www.digicom.it/digisit/prodotti.nsf/itprodottiidx/MU372L01]<br />
Tested on Raspbian and Archlinux. Detected as 230d:0001. Works with cdc_acm driver. Install usb_modeswitch.<br />
There are 2 "com ports"( /dev/ttyACM0 and /dev/ttyACM1 ) . Tested with Network Manager.Works also perfectly with SAKYS3G [http://www.sakis3g.org/] tools (!! led is always off !!) and wvdial. A working wvdial.conf : http://ubuntuforums.org/showpost.php?p=10361881&postcount=28 . (for example for Vodafone IT , replace Init3 with this : Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" and replace line Modem = /dev/ttyUSB0 with Modem = /dev/ttyACM1 ) and run with wvdial voda .<br />
<br />
== USB IR Receivers==<br />
SMK Manufacturing, Inc. eHome Infrared Receiver (Works out of the box with OpenELEC)<br />
<br />
== USB Radio devices==<br />
*FM Radio<br />
** ADS InstantFM Music - FM radio tuner works fine under debian.<br />
<br />
== USB TV Tuners and DVB devices==<br />
*August<br />
**DVB-T205, based on rtl2832u chipset, working with [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0 this driver]. Tested with Saorview (Irish DTT service), both HD & SD.<br />
*DVBSky<br />
**[http://dvbsky.eu/Products_S860.html Mystique SaTiX-S2 Sky USB]: Scanning/watching SD and HD works via vdr and streamdev plugin, watching on the Pi directly is laggy as hell. DVB-USB and I2C support must be enabled in the kernel. Needs drivers/firmware from [http://dvbsky.eu/Support.html here]. <br />
*Hauppauge<br />
** Hauppauge NOVA-T Stick (Revision 70xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge NOVA-TD Stick (Revision 52xxx) DiBcom DiB0700 chipset, requires powered hub.<br />
** Hauppauge WinTV-HVR-1950 (tested analog tuner with omxplayer)<br />
*K-World<br />
** K-World UB499-2T Dual DVB-T USB Tuner. IT9137 chipset. With no other USB devices connected Pi can just about power this stick. IR and supplied remote work with XBMC.<br />
*Technisat<br />
**Technisat_SkyStar_USB_HD. Instructions: http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_HD Used the Pi to receive and redirect it via network to another host. Didn't try to play back the stream on the Pi itself. Tested with Astra 19.2E radio and SD-TV channels<br />
*Generic<br />
** [http://www.onsources.com/product_images/a/757/watch_and_record_digital_tv_dongle__44323_zoom.jpg DVB-T USB Dongle (Silver casing)], based on AF9015 chipset.<br />
** [http://www.electrodepot.fr/media/catalog/product/cache/1/image/500x/9df78eab33525d08d6e5fb8d27136e95/P926993.jpg DVB-T USB Dongle], based on RTL2832 FC12 (HD/SD), IR detected but not tested<br />
<br />
== USB Webcams ==<br />
<br />
Debian image is missing v4l kernel modules, so video devices are not available. Kernel and firmware upgrade can possibly be used to fix this[http://blog.pixelami.com/2012/06/raspberry-pi-firmware-update-for-debian-squeeze/].<br />
<br />
===Working USB Webcams===<br />
*'''Creative'''<br />
**Creative VF0470 Live! (works out of the box on ArchLinux)<br />
**Creative VF0260 Live! Cam Vista IM (works out of the box)<br />
**Creative VF0640 Live! Cam Socialize (works on Raspbian at 320x240 resolution, 15fps)<br />
**Webcam Notebook PD1170 (detects, untested)<br />
<br />
*'''HP'''<br />
**Webcam HD-2200 [http://www.amazon.com/HP-Webcam-HD-2200-BR384AA-ABA/dp/B004UR9P9Q/ (Amazon)] [http://shopping.hp.com/en_US/home-office/-/products/Electronics/Webcams/BR384AA?HP-HD-2200-Webcam (HP)] [http://www.walmart.com/ip/HP-Webcam-HD-2200/16775645 (Walmart)] <br />
**Webcam HP-3100 - UVCVideo /dev/video0 Needs chmod to 666 to operate. Will work without hub if only device in USB ports. Works with both Arch and wheezy out of the box<br />
<br />
*'''Logitech'''<br />
**Webcam C100 Model Number V-U0013 (works fine without powered hub - Tested on 2012-08-16-wheezy-raspbian image - motion detection was good - video streaming was really slow might be unusable)<br />
**Webcam C200<br />
**Webcam C270 (with external power)<br />
**Webcam C310 does not require a powered hub to capture snapshots<br />
**Webcam C510<br />
**Webcam C525 (works fine without powered hub)<br />
**HD Webcam C615 (works fine without powered hub)<br />
**Webcam C910 (with external power, is uncvideo)<br />
**QuickCam Orbit/Sphere USB webcam (ext. power) <br />
**QuickCam Pro 9000 - powered by Raspi, working on debian wheezy<br />
**Webcam Pro 9000 (046d:0809), powered by RPi (measured ~120 mA capturing at ~5 fps), works on Arch<br />
<br />
*'''Medion'''<br />
** MD86511 - powered by Raspi, working on Raspbian “wheezy” from 2012-07-15<br />
<br />
*'''Microsoft'''<br />
**Xbox Live Vision camera (045e:0294), powered by Raspi, working on Arch<br />
**LifeCam Cinema 720p USB HD Webcam H5D-00001 - Powered by USB Hub. Working on Raspbian "wheezy"<br />
**LifeCam HD-6000 - Powered by Raspberry Pi. Working on Raspbian "wheezy" (2012-07-15)<br />
**LifeCam NX-6000 - Powered by Raspberry Pi. Working on Debian "wheezy"<br />
**LifeCam VX-7000 - Powered by USB Hub. Working on Raspian "wheezy"<br />
**LifeCam VX-3000 - On "raspbian" wheezy (though there do appear to be some issues with image quality and getting partial frames and such, with fswebcam)<br />
**LifeCam VX-800 - Powered by Raspberry Pi. Working out of the box on Raspbian [http://www.amazon.it/Microsoft-JSD-00008-LifeCam-VX-800/dp/B0057FWVSC (Amazon)] Doesn't work at full 640 * 480 resolution but OK at 352 * 288.<br />
<br />
*'''Sony'''<br />
**PlayStation Eye (for PlayStation 3) (the occasional frame is corrupted/stutters when running at 640x480)<br />
**PlayStation Eyetoy (for PlayStation 2) (Occasional 'mangled frame' directly connected to Rev 2 Pi)<br />
<br />
*'''Trust'''<br />
** 2MP Auto Focus Webcam (works out of the box on ArchLinux)<br />
<br />
===Problem USB Webcams===<br />
<br />
*'''Creative'''<br />
**WebCam Pro / PD1030 - ov519 driver crashes almost immediately. ("gspca: ISOC data error: [0] len=0, status=-4004")<br />
<br />
*'''Logitech'''<br />
**Webcam Pro 9000 - Has issues capturing images at higher than default resolutions (using motion - Arch and Debian).<br />
**Webcam Pro 4000 - It uses pwc driver which does not work. Maybe it's because of general Raspi USB bug.<br />
<br />
*'''Microsoft'''<br />
**Lifecam HD5000 - Picture breaks up at the bottom<br />
**LifeCam Studio/Cinema - Has UVC issues detailed here [http://www.ideasonboard.org/uvc/#devices]. Horizontal lines problem [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12304]. Stability issues [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=12247].<br />
<br />
*'''Sony'''<br />
**Eye Toy (PlayStation 2) model SLEH 00030 - (OV519 camera). Picture constantly breaks up on xawtv and wxcam under Arch Linux. Noted there were ISOC data error len=0 status=-4004 errors in dmesg. This happens when powered from the Pi and when powered from a Pluscom USB hub. Arch was updated on 17th July 2012<br />
<br />
*'''Trust'''<br />
**SPACEC@M 200 - (OV511 camera). Picture stops after a few seconds in xawtv under Arch Linux and xawtv reports libv4l2 errors. This happens when powered from the Pi and when powered from a Pluscom USB Hub. Arch was updated on 17th July 2012<br />
<br />
== USB GPS devices ==<br />
*Royaltek<br />
**Royaltek RGM 2000 SiRF2 using the included serial (TTL) to USB - converter. That uses a Profilic pl2303-chip so you'll need to compile the module or the kernel manually<br />
*Garmin<br />
**Garmin eTrex Vista HCx: Works but may draw much power. To get it working (software part): https://wiki.openstreetmap.org/wiki/USB_Garmin_on_GNU/Linux<br />
*GlobalSat<br />
**GlobalSat BU-353 Does not require a powered hub, works fine when directly plugged into the RPi. On Raspian, requires the gpsd and gpsd-client packages. For some reason, the gpsd daemon does not always start correctly on boot. You may need to do something like the following to manually restart it:<br /><pre>sudo killall gpsd; sudo gpsd /dev/ttyUSB0 -F /var/run/gpsd.sock</pre><br />
<br />
*Wintec<br />
**WBT-200: No problem on Debian<br />
*Holux<br />
**Holux M-215: Works fine on Arch, uses Silicon Labs CP210x RS232 serial adaptor driver<br />
*Bluenext<br />
**Bluenext BN903S: No problem on Debian image (19-04-2012).<br />
<br />
== USB UART adapters ==<br />
The USB UART adapter is used to access the serial console of the Raspberry Pi from a development host such as a laptop or desktop PC. The USB end connects to the PC and the UART header end connects to the USB. While it is possible to connect the USB end to another Raspberry Pi, this configuration has not been tested unless explicitly mentioned against an individual entry below.<br />
<br />
*'''FTDI'''<br />
**FT232 chip based adapters works for some people but others find it hangs Linux when the port is opened. module is ftdi_sio<br />
<br />
** FT2232D dual RS232/FIFO works (used in various JTAG devices)<br />
<br />
*Prolific<br />
**PL2303 chip based adaptors works fine on latest Debian tested with minicom and gtkterm<br />
<br />
== Other, exotic USB devices ==<br />
=== CAN Bus ===<br />
*PEAK-System (www.peak-system.com)<br />
**PCAN-USB using the driver (kernel module) from http://www.peak-system.com/fileadmin/media/linux/index.htm<br />
=== Home automation ===<br />
*Tellstick (www.telldus.com), installation [[R-Pi_Tellstick_core|instructions]]<br />
**Depends on libftdi1<br />
<br />
=== Touch Screen ===<br />
*ACER T230H touch screen [http://support.acer.com/acerpanam/monitor/2009/acer/t230h/t230hnv.shtml]<br />
**USB TS identifies as "Quanta Computer, Inc. Optical dual-touch panel", module hid_quanta<br />
**Seems to draw over 200 mA from USB!<br />
=== Floppy Disk Drive ===<br />
*Samsung USB Floppy Drive SFD-321U/HP<br />
**I suppose a floppy drive might be considered exotic nowadays!<br />
**LSUSB lists it as Samsung Electro-Mechanics Co. Floppy Disk Drive<br />
**Only tried connected to a powered USB hub, as the drive is labelled 5V at 0.5A on a Raspberry Pi running Debian Wheezy.<br />
**tail -f /var/log/syslog looking for mount device when plugged in, came up as SDA in testing.<br />
**sudo mkdir /media/floppy<br />
**sudo mount /dev/sda /media/floppy<br />
**Contents of floppy now available in /media/floppy<br />
**To remove drive, ensure no sessions have the floppy directory as the current working directory.<br />
**sudo umount /media/floppy<br />
=== USB Missile Launcher ===<br />
*USB Missile Launcher / Rocket Launcher sold in UK by Marks and Spencer but also sold under a range of other names.<br />
**USB ID 1130:0202 Tenx Technology, Inc. Use apt-get install pymissile (python code) and there is C code at [http://sourceforge.net/projects/usbmissile/ usbmissile from Source Forge]<br />
=== USB Docking Stations ===<br />
*StarTech USB 3.0 to Dual 2.5"/3.5" SATA HDD Dock (SATDOCK2U3GB)<br />
**This is an externally powered dual sata HDD docking station, which has USB2.0 compatibility with the Pi. <br />
**Tested with latest raspbmc and debian wheezy raspbian, 3.1.9+ #168<br />
=== USB RFID Reader ===<br />
*Unbranded 125KHz EM4100 RFID reader from eBay sellers (< £7), the one with a Windows logo on (easily scratches off for Linux users).<br />
**Initially would not work when plugged in directly to RPi. Worked when connected via an unpowered Trust hub. Worked after RPi was modified with 10K resistors over the USB polyfuses (warranty invalidated). Probably would work fine with powered hub.<br />
**Sends a 10 digit string to current window or console as if it was a keyboard. Can be captured independently of keyboard using Linux event interface (/dev/input) but kernel in current distributions does not have CONFIG_INPUT_EVDEV selected so kernel rebuild is necessary.<br />
=== JTAG ===<br />
* FTDI2232D dual RS232/FIFO based JTAG (e.g. SheevaPlug JTAGKey USB-ID 9e88:9e8f)<br />
** works using the RPi as a development host<br />
<br />
== PS2 / AT to USB Converters ==<br />
<br />
* Unbranded active converter known as the "blue cube". Based on the Cypress CY7C63723C 8 bit RISC. Please see http://geekhack.org/showwiki.php?title=PS2-to-USB+adapters for more information.<br />
Note that although the adapter might work, PS/2 keyboards were not designed to be low power USB devices, so they might not meet the requirement to work with considerable lowered supply voltage (4.4 volt) provided by the USB ports of the raspberry PI. These keyboards should work when powered by a powered hub. <br />
<br />
'''Tested PS2/AT keybords'''<br />
<br />
All above tested with the famous "blue cube" on a powered USB hub.<br />
<br />
*IBM Model F (please note requires an additional AT to PS2 converter)<br />
*Dell AT101w<br />
*Northgate Ominikey Ultra T (please note requires an aditonal AT to PS2 converter)<br />
<br />
* 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller<br />
** Working: Ipex RT215KTW PS/2 keyboard<br />
** Not working: HP SK-2502 PS/2 keyboard (gets power but does not init - three LEDs remain permanently lit. Keyboard + Holtek converter work on a Linux PC, although this keyboard doesn't work with some native PS/2 ports.)<br />
<br />
== Power adapters ==<br />
The Raspberry Pi uses a standard Micro USB (type B) power connector, which runs at 5v. Generally you can use a MicroUSB to USB cable and then either power the Raspberry Pi directly from your main computers USB ports (if they provide enough power), or by using a USB to Mains adaptor. A number of mobile phones use MicroUSB power cables, and these are compatible with the Raspberry Pi in most cases. Below is a list of power adaptors known to work.<br />
<br />
===Working power Adapters===<br />
* '''AlcaPower'''<br />
** 5V 2.5A Model AP5A - Charger/switching with 7 connectors(also Microusb)<br />
* '''Ansmann'''<br />
*** Dual USB charger slim, Model-Nr. 1201-0001<br />
* '''Apple'''<br />
** 5V 2.1A USB charger for iPad2, model A1357<br />
** 5V 1.0A USB Charger for iPod<br />
** 5V 1.0A USB Charger for iPhone 4<br />
* '''Amazon'''<br />
** 5V 0.85A USB charger for Kindle<br />
** 5V 2A Mains to USB A adaptor, Branded "CostMad" <br />
* '''Asus'''<br />
** 5V 2.0A USB charger for Google Nexus 7<br />
* '''Belkin'''<br />
** 5V 2.6A 4 port Ultra-Slim Desktop hub (Model F4U040) (RPi running from USB Hub port)<br />
** 5V 2.5A 4 port USB Hub (Model F5U404) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB 2.0 Mobile Powered Hub (Model F4U018) (RPi running from USB Hub port)<br />
** 5V 3.5A 7 port USB Hub (Model F5U706) (RPi running from USB Hub port)<br />
** Mini Surge Protector Dual USB Charger (Model BZ103050-TVL)<br />
** Universal USB Wall Charger (5V 1A) (Model F8Z222uk)<br />
* '''Blackberry'''<br />
** Charger for Pearl Flip 8220, Bold 9600 (B)<br />
** Charger for Tour 9630<br />
** 5V 0.7A Model PSM04R-0500CHW1(M), RIM Part Number HDW-17957-003 (B)<br />
** 5v 750mA Model RIM-C-0004aDUUUC-001, RIM Part Number HWD-24481-001 (comes with Blackberry 9300)<br />
** 5v 750mA Model RIM-C-0004ADUUS-001 035D, Single port plug. (Tested with USB B to Micro USB cable from Logitech H760 Headset)<br />
** 5V 2A Model PSAC10R-050QT, RIM Part Number HDW-34725-001<br />
* '''Dell'''<br />
** USB Hub integrated in Dell monitors (B)<br />
* '''Garmin'''<br />
** 5V 1A charger (Model: PSA105R-050Q) supplied with Garmin Edge 800 GPS. Requires a USB-A to MicroUSB-B cable. Belkin 6ft cable (F3U151B06) works.<br />
* '''Griffin'''<br />
** Power Block Model P2417. 5V 2.1A<br />
** Power Block Model P1190R2 Two USB 5V Outputs, 1Amp each<br />
* '''Hama'''<br />
** 1000mA Travel Charger for Micro USB universal (barcode nr: 4 007249 935854)<br />
* '''HP'''<br />
** 5.3V 2A Charger for HP Touchpad (B)<br />
* '''HTC'''<br />
** 5V 1A TCP-300 USB phone charger (B)<br />
** 5V 1A TC B250 USB charger (HTC R/N: 79H00096-00M)<br />
** 5V 1A TC E250 USB charger (HTC R/N: 79H00098-02M)<br />
* '''i-box (Philex Electronic Ltd)'''<br />
** 5V 1A USB charger, 1 USB socket, no USB lead supplied, Model: 76971HS/02 (available from ASDA and others in the UK) (B).<br />
* '''IDAPT'''<br />
** [http://www.idaptweb.com/universal_chargers/i4/ i4 multi device charger] - 3 interchangeable device tips + USB A socket ([https://twitter.com/andrewmk/status/226057302879375361 see it in use])<br />
* '''Innergie'''<br />
**15W Dual USB Adapter. Model: mMini AC15. Output: 5V, 3A (max per port), 15W max. [http://www.myinnergie.com/DuoPowerKit/specification.aspx Spec Sheet]<br />
* '''Kodak'''<br />
** 5V 1A TESA5G1-0501200<br />
** 5V 1.0A K20-AM<br />
* '''LG'''<br />
** 4.8V 1A Travel Adapter<br />
**5.1V 0.7A Travel Adapter (Model: STA-U34WVI)<br />
**5.1V 0.7A Travel Adapter (Model: STA-U12ER)<br />
* '''Logic'''<br />
** 4 port USB Hub (Model LP4HUB10). (RPi running from USB Hub port, red power line (+5v) inside hub cut) (B)<br />
*'''LogiLink'''<br />
**5V 2.1A Switching power supply, model PA0040 (B)<br />
* '''Logitech'''<br />
** 5V 1A SDC115-USB Remote Control Charger and cable<br />
* '''Maplin Electronics'''<br />
** 5V 1A dual USB power supply, model number H25B-MT-K2<br />
** Micro USB Power Supply N19HX<br />
* '''Medion'''<br />
** 5V 1A USB power supply for OYO ebook reader<br />
* '''Microsoft'''<br />
*** Zune Zune AC Adapter v2 <br />
* '''Motorola'''<br />
** [http://www.amazon.com/Motorola-Micro-USB-Home-Travel-Charger/dp/B004EYSKM8/ 5V 0.85A SPN5504 Charger with Cable]<br />
* '''Nokia'''<br />
** 5V 1.2A AC-10E Charger<br />
** [http://accessories.nokia.com/products/nokia-fast-usb-charger-ac-16/ 5V 1A AC-16E Charger]<br />
* '''Noname'''<br />
** 5V 2.1A KMS-AC09 4 port USB charger (B) [http://www.miniinthebox.com/kms-ac09-universal-ac-adapter-for-ipad-ipad-2-iphone-white_p208568.html]<br />
** 5.2V 1A MW-3NU10GT - no cable, but this one works well (1m): [http://www.amazon.de/gp/product/B005L8VELA]<br />
** 5V 1A Model H-IP008 Serial No. H10T80L068<br />
* '''Novatel Wireless'''<br />
** 5V 1.05A Charger, model number SSW-1811, packaged with Verizon Wireless MiFi device<br />
* '''Orange'''<br />
** 5V 0.7A Charger for Orange San Francisco<br />
* '''Palm'''<br />
** 5V 1A Charger for Palm Pixi+ (B)<br />
* '''Pantech'''<br />
** 5.0V 1A CNR USB with LG DLC100 micro usb cable<br />
* '''Phihong'''<br />
** Switching Power Supply. Model: PSAC09R-050. Output: 5V, 1.8A, microUSB. [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]<br />
* '''PortaPow'''<br />
** PortaPow UK Mains Wall Power Supply<br />
* '''RS Components'<br />
** HNP06UK (RS 7263069) Switching Adapter 5.0V 1200mA<br />
* '''Samsung'''<br />
** 5V 0.7A Charger for Galaxy S model ETA0U10EBE<br />
** 5V 0.7A Charger for Galaxy SII<br />
** 5V 1A Charger for Galaxy Nexus<br />
** 5V 0.7A Charger for Galaxy S Vibrant (SGH-T959)<br />
** 5V 0.7A Travel Adapter model ATADU10EBE<br />
** 5V 1A? Samsung C Series TV USB-port for external HDDs. Running stable with openelec<br />
** 5v ?A(Unknown) Samsung Service Port (USB) on LN32A330J1DXZA 720p 32 inch HDTV <br />
** 5V Unknown Ampere Samsung UA22D5000 & UA32D5000 TV USB Port. Test with Raspbian Wheezy, Raspbmc, and RPITC<br />
* '''Shun Shing'''<br />
** 100-240VAC to 5VDC 1A USB power supply, model SP5Q-AU [http://jaycar.co.nz/productView.asp?ID=MP3455 Jaycar]<br />
* '''Sony Ericsson'''<br />
** 5V 0.7A Charger CST-80<br />
* '''Travel Charger'''<br />
** 5V 2.0A USB Power Adapter, [http://www.amazon.co.uk/gp/product/B0065JCIPU/ Amazon Link]<br />
* '''Technika'''<br />
** 5V 1A USB Power Adapter, model MPASS01 (B)<br />
* '''The Pi Hut'''<br />
** Micro USB Power Supply for the Raspberry Pi. 5V 1000mA (from [http://thepihut.com/products/micro-usb-power-supply-for-the-raspberry-pi The Pi Hut's Raspberry Pi Store]) (also from [http://www.ebay.co.uk/itm/330757401271 eBay ])<br />
* '''Trisonic'''<br />
** TS-CP600T - MICRO USB HOME & TRAVEL CHARGER (5V, 800mA) $3 at Daiso U.S. stores.<br />
* '''TruePower'''<br />
** [http://u-socket.com/ U-Socket] 5V 2.1A AC Receptacle with Built-in USB ports (2.1A per USB port) model ACE-7169<br />
* '''Voltcraft'''<br />
** SPS5-12W, 2500 mA, requires additional USB <-> miniUSB adapter/cable, works perfectly (bought from [http://www.conrad.de/ce/de/product/512660/VOLTCRAFT-SPS5-12W-Steckernetzteil-Steckernetzgeraet-5-VDC-2500-mA-12-Watt Conrad Shop])<br />
<br />
===Problem power Adapters===<br />
* '''Masterplug'''<br />
** Masterplug Surge Protected USB Adaptor 2 x 1A USB Polished Black - USB ports and ethernet don't work with this adapter and some screen artefacts using HDMI.<br />
* '''Monoprice'''<br />
** 5v, 2A 3 Outlet Power Surge Protector Wall Tap w/ 2 Built-In USB Charger - some display artifacts, sometimes unable to find mouse, some failures to boot. Measured less than 4.75v between TP1 and TP2 when used with a Monoprice cable.<br />
* '''Sony Ericsson'''<br />
** 5v, 850mA EP800. Some failures to boot , ethernet loops at boot.<br />
<br />
===External Battery packs (with 5V regulated output)===<br />
* '''Anker Astro3'''<br />
** Anker Astro3 10000mAh with Dual 2A USB Output<br />
* '''Duracell'''<br />
** PPS2 Instant USB Charger<br />
* '''Energizer/XPAL'''<br />
** XP18000 18000mAh Power Pack<br />
* '''Generic - eBay no brand'''<br />
** 6000T Pocket Power 5000mAh - eBay item 271009959140<br />
** Power Bank for iPad/iPhone 5000mAh (looks the same as a New Trent IMP50D or TeckNet iEP380) - eBay item 280914455938<br />
* '''New Trent'''<br />
** iCurve IMP70D 7000mAh (Approx 12hrs from full charge)<br />
** IMP120D 12000mAh<br />
* '''Sinoele'''<br />
** Movpower - Power Bank 5200mAh (8hrs with Wifi active)<br />
* '''TeckNet'''<br />
** iEP387 Dual-Port 7000mAh External Power Bank (The charging lead can be used to connect the Tecknet to the RPi. Ran the RPi with wifi dongle and wireless keyboard receiver for over 9 hours of light use.)<br />
** iEP392 Dual-Port 12000mAh External Power Bank (1A port, ~16.5 hours)<br />
** Rayovac PS60 5v 800mAh<br />
* '''VINZO'''<br />
** Power Bank 5000mAh Grey Output 5V 1000mA<br />
* '''Kodak Power Pack KP1000'''<br />
** 1A USB rechargeable battery pack - see [http://blog.sheasilverman.com/2012/09/its-alive/ Shea Silverman's blog]<br />
<br />
== Display adapters ==<br />
Note that active converter boxes may draw power through the HDMI port, and thus will put an extra load on your PSU, and also increase the current running through the PI's primary input fuse. HDMI ports (and the raspberry PI) are designed so that they deliver a very limited amount of power (50mA) to the TV/Monitor/display-adapter and much more isn't in theory allowed. In fact there is a diode (D1) in series with the power line which can only handle 200mA, if the adapter tries to draw much more than that the diode might fail. Therefore only externally powered adapters are to be recommended. Despite this, many people report success with these high powered devices.<br />
<br />
===HDMI->DVI-D===<br />
There are three kinds of DVI. There is DVI-D, a digital signal fully compatible with HDMI, so a passive cable can be used. There is DVI-I, which is a connector with both analog pins and digital pins. An HDMI to DVI-D adapter fits in a DVI-I female connector. Finally, there is DVI-A. This a fairly rare connection, but occasionally it will be found on some monitors and is an analog interface, in fact the same as VGA!<br />
<br />
Some adapters like Farnell part AK-CBHD03-BK are HDMI to DVI-I, which, while not fitting in a DVI-D monitor, are still compatible. The analog pins simply must be bent.<br />
<br />
The HDMI to DVI-D cable provided by Apple with the 2010 Mac Mini worked. It does not appear this adapter can be purchased separately.<br />
<br />
* AmazonBasics HDMI to DVI Adapter Cable (model SK231) works and is inexpensive.<br />
* [http://www.ebay.com/itm/DVI-Female-to-HDMI-Male-Adapter-Converter-Adaptor-Gold-for-HDTV-Full-HD-/320946033059?pt=US_Video_Cables_Adapters&hash=item4ab9dfd1a3 A generic HDMI-to-DVI converter from eBay]. Works well, but it's probably the cause of some power loss between the RPi and the monitor, causing [http://elinux.org/R-Pi_Troubleshooting#Interference_visible_on_a_HDMI_or_DVI_monitor this] problem. A setting of config_hdmi_boost='''5''' in /etc/boot solved this. Note that config_hdmi_boost='''4''', as suggested in the troubleshooting guide, helped but did not solve the problem completely.<br />
<br />
===HDMI->VGA converter boxes===<br />
Most will require use [[RPi_config.txt]]. Start off with hdmi_safe=1.<br />
<br />
[http://www.element14.com/community/groups/raspberry-pi/blog/2012/08/16/raspberry-pi-hdmi-to-vga-converter Sanoxy HDMI to VGA converter], $27 from Amazon, no changes required with official Raspbian Wheezy image (2012-Jul-15), note: had already disabled overscan previously<br />
<br />
http://www.amazon.co.uk/gp/product/B007KEIRNG -- "Neewer" HDMI to VGA -- some issues discussed below:<br />
However, according to user "Tom1989" the same Neewer HDMI to VGA adapter burned out BAT54 Schottky diode D1 on the RasPi and broke its HDMI output: [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9819 Serious HDMI Problems. What's that smell? Burning Raspberry!]. On that thread, "mahjongg" suggested the NXP (or equivalent) PMEG2010AET as a high-current replacement for D1. The PMEG2010AET has 1A max forward current, much greater than the BAT54's 200 mA limit which may be exceeded by your HDMI -> VGA converter. Remember that the converter's current must come from your RasPi power supply and go through the Micro USB cable and polyfuse F3, so you may get extra voltage drops and/or cause F3 to trip depending on how much current the converter uses. As always with board modifications, YMMV. Also on the "Burning Raspberry!" thread, user "pwinwood" reported the Neewer's current to be 400 mA, which is twice the limit of BAT54 diode D1. "pwinwood" also took the Neewer apart and added its own +5V connection adapted from a USB cable, which bypasses RasPi's Micro USB cable and polyfuse F3.<br />
<br />
http://www.amazon.co.uk/KanaaN-Adapter-Converter-Cable-Resolutions/dp/B007QT0NNW -- "Kanaan" HDMI-VGA<br />
<br />
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130699741793 -- eBay is swarming with $16 converters all like this one.<br />
<br />
This adapter -- http://www.ebay.co.uk/itm/300692770623 -- works from 640x480 up to 1920x1080, audio over HDMI works too.<br />
Sadly the IC's on the PCB have all been scrubbed.<br />
Requires HDMI boost and overscan, [[RPi_config.txt|config.txt]] settings for 640x480@60Hz:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=4<br />
<br>config_hdmi_boost=4<br />
<br>overscan_top=-30<br />
<br>overscan_bottom=-30<br />
<br>overscan_left=-30<br />
<br>overscan_right=-30<br />
<br />
According to user "Mortimer" -- HDFuryPro HDMI to YPbBr/VGA Converter found on Amazon -- http://www.amazon.co.uk/Inputs-Component-Video-YPbPr-Converter/dp/B00797ZZ4S/ -- Works with Raspberry Pi. Tested against a Philips 170B 1280x1024 LCD monitor, producing a full native resolution image. Not tested against a Component Video TV yet, and audio has yet to be got working.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
<br />
According to user "Mortimer" -- HDFury1 1080p HDMI to VGA Converter from HDFury.com. I'm not sure the HDFury1 can be got a hold of easily nowadays, I happened to have access to one to try out. HDFury2, 3 and 4 are available as far as I can tell, but are very pricey compared to alternatives. HDFury1 was around £80 when we bought one for a project at work. HDFury2 seems to be around £130, 3 and 4 are getting on towards £200 or more. So not to be recommended as a solution unless you happen to have one lying around. I don't believe there is any relationship between the company that produces these and the HDFuryPro I bought for myself (See above). I didn't alter any config settings, just plugged it in. It doesn't work without having its external power supply connected, as it requires 0.4A, which is too much draw for the 5V supply available from the HDMI socket on the Raspberry Pi. Its power LED lights, but no picture is produced. In comparison to the HDFuryPro this picture from this device is sharper, but not enough to justify the extra cost.<br />
The [[RPi_config.txt|config.txt]] settings used are:<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=36<br />
<br>disable_overscan=1<br />
<br />
http://www.amazon.co.uk/gp/product/B007SM7O2U/ref=oh_details_o02_s00_i00 - "Cable Matters"<br />
<br />
Here It is another option: http://www.dealextreme.com/p/hdmi-v1-4-male-to-vga-female-converter-adapter-cable-white-15cm-130458, is cheap (it's free shipping from china) and works perfectly, I tested it with an Acer VGA monitor (AL1511), without no change in my XBMC distribution.<br />
The config.txt for Raspbian (Flatron VGA monitor 1024 * 768):<br />
<br>hdmi_drive=2<br />
<br>hdmi_group=2<br />
<br>hdmi_mode=16<br />
<br>hdmi_force_hotplug=1<br />
<br>disable_overscan=0<br />
<br />
<br />
And another one: http://cgi.ebay.pl/ws/eBayISAPI.dll?ViewItem&item=251086464644. Very cheap but works perfectly. No config.txt changes was needed at all. I've booted Raspbian and OpenELEC. Monitor is detected correctly and the optimal resolution is set (Raspbian) or you can change the res in the menu (OpenELEC). <br />
The /opt/vc/bin/tvservice is able to read monitor edid data. I tested the adapter using NEC 72VM 15" LCD. (1280x1024 60Hz, 1024x768 60Hz, 640x480 works) The adapter is based on Lontium LT8511A chip, but I was unable to get the spec for it.<br />
The D1 diode is getting very hot though. Most likely the adapter drives more than 200mA. The standard RS Components 1,2A usb power supply is able to provide enough power for the RPi and the adapter. I'll try to modify the adapter to connect external power to bypass D1.<br />
Marcin.<br />
<br />
===DVI-D -> VGA active adapters===<br />
None are currently listed<br />
<br />
===Composite->SCART===<br />
SCART adapters (SCART plugs with three RCA connectors in the back), will probably work when used with the yellow RCA plug connected to the R-PI's RCA video output. Additionally using a splitter cable (3.5mm jack plug on one end, and red-white RCA plugs on the other end) will probably work when plugged into the red and white (left and right audio channels) of the SCART adapter.<br />
<br />
* Generic - works<br />
<br />
===Composite->VGA converter boxes===<br />
* [http://www.extron.com/product/product.aspx?id=dvs204| Extron DVS-204] - works no problem!<br />
<br />
== SD cards ==<br />
<br />
Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)<br />
For this reason, please specify product numbers in the lists below, when possible.<br />
<br />
You can also attach the following fields from your card's CID :<br />
<pre><br />
cd /sys/class/mmc_host/mmc?/mmc?:*<br />
echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"<br />
</pre><br />
<br />
please merge with http://elinux.org/RPi_Performance#SD_card<br />
<br />
===Preinstalled SD Cards===<br />
Sandisk SD Cards Preinstalled with the latest Raspbian operating system are available from [http://thepihut.com The Pi Hut's Raspberry Pi Store].<br />
* '''SanDisk''' <br />
** [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
** [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux.]<br />
<br />
===Working SD Cards===<br />
* '''7DAYSHOP.COM''' <br />
** 8GB Professional SDHC Class 10 (man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0)<br />
* '''Adata''' <br />
** 2GB SD Class 2 Speedy (8B0947 printed on back) This card works with every distro I tried. May be old, may not be the fastest, but is very stable.<br />
** 4GB SDHC Class 4 (BH1109416141G)<br />
** 8GB SDHC Class 2 (MMB3F08GWMCA-GE)<br />
** 8GB SDHC Class 4 (MicroSD w/ adapter)<br />
** 8GB SDHC Class 6 (MMAGR08GUDCA-DB)<br />
** 8GB SDHC Class 10 (AUSDH8GCL10-R)<br />
** 8GB SDHC Class 10 (ASDH8GCL10-R) Tested on 2012-06-18-wheezy-beta.zip<br />
** 8GB SDHC Class 10 (P-SDH8G10-EC from BJ's USA tested on Raspbian)<br />
** 16GB SDHC Class 6<br />
** 16GB SDHC Class 10 (16GSDHC10)<br />
** 16GB SDHC Class 10 (microSD w/ adapter AUSDH16GCL10-RA1)<br />
** 32GB SDHC Class 10 (ASDH32GCL10-R) Tested on wheezy-beta with latest kernel and firmware and raspbian wheezy<br />
* '''AmazonBasics'''<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH0LS 8GB SDHC Class 10 B0058GH0LS]<br />
** [http://www.amazon.com/AmazonBasics-SDHC-Class-Secure-Digital/dp/B0058GH1IK 16GB SDHC Class 10 B0058GH1IK]<br />
** 32GB SDHC Class 10<br />
* '''Apacer'''<br />
** 8GB microSDHC Class 10 (with adapter)<br />
** 8GB SDHC Class 6<br />
* '''Centon'''<br />
** 16GB SDHC Class 4 (1447 printed on back)<br />
* '''CnMemory'''<br />
** 8GB SDHC Class 4 (Silver/Black label says 'High Capacity Card') 84209_8GB_SDHC, bought from Maplins. No error messages seen, but operation is much slower than with a SanDisk 4GB Class 4 card.<br />
* '''Dane-Elec''' <br />
** 16GB SDHC Class 4<br />
** 16GB Pro 200X Class 10 DEMS16GB2683ENBA<br />
* '''Dikom'''<br />
** 16GB SDHC Class 10 (serial 207H3MD016IBSD)<br />
* '''Duracell'''<br />
** 4GB SDHC Class 4<br />
** 16GB SDHC Class 10 (labelled Pro Photo 200x)<br />
** 32GB SDHC Class 10 (man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0) (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012, following [[RPi_Performance#SD_card]])<br />
* '''Emtec''' <br />
** 2GB SD man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0<br />
** 4GB SDHC Class 4 (EKMSD4G60XHCN)<br />
** 16GB SDHC Class 10 (EKMSD16G150XHC) (less than half as fast as Sandisk 16gb Class 10)<br />
* '''Extrememory''' <br />
** 16GB SDHC Class 10 (man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0)<br />
** 32GB SDHC Class 10 (man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0)<br />
* '''Eye-Fi'''<br />
** 4GB WiFi SDHC (Wi-Fi doesn't work)<br />
* '''Fugi''' <br />
** 32GB SDHC Class 10 (P10NM00580A) (man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0)<br />
* '''Hama''' <br />
** 2GB SD Class 2<br />
** 8GB SDHC High Speed Pro Class 6<br />
* '''Hema (Dutch dept. store)'''<br />
** 4GB<br />
** 8GB SDHC Class 4<br />
* '''Goodram''' <br />
** 8GB microSDHC Class 4<br />
** 16GB microSDHC Class 4 (SDU16GHCAGRR10)<br />
** 16GB SDHC Class 10<br />
* '''HP'''<br />
** 8GB SDHC Class 4 (doesn't reboot during first time startup process, but restart again and fine after that).<br />
** [http://www.amazon.com/HP-CG790A-AZ-Flash-Memory-Class/dp/B007X7U224 32GB SDHC Class 10] <br />
* '''ICIDU'''<br />
** 4GB SDHC Class 10 (also had no issues)<br />
** 16GB SDHC Class 10 (image write had issues, might be my inexperience. It boots & shows Xserver)<br />
** 32GB SDHC Class 10 (had no issues whatsoever, the comment above might be a dud.)<br />
** 8GB microSDHC Class 10<br />
** 16GB microSDHC Class 10 (20MB/sec)<br />
** 32GB microSDHC Class 10 (20MB/sec)<br />
* '''Integral''' <br />
** 4GB SDHC Ultima Pro Class 10<br />
** 4GB SDHC Class 4 SD-K04G (Purple label)<br />
** 8GB SDHC Ultima Pro Class 6 (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 8GB SDHC Ultima Pro Class 10 (20MB/s) (Works - initial error -110 but boots within 5 seconds with no further errors or issues)<br />
** 16GB SDHC Ultima Pro Class 6<br />
** [http://www.amazon.co.uk/gp/product/B0047T6XME 16GB SDHC Class 10 Ultima Pro (20MB/s)]<br />
** 32GB SDHC Ultima Pro Class 10 (20MB/s) - Slow to initially boot past the Rainbow Screen.<br />
* '''Joyflash''' <br />
** 16GB SDHC Class 10 (LTSD1112016GB)<br />
* '''Kingmax''' <br />
** 4GB SDHC Class 2<br />
** 4GB microSDHC Class 4 (KM04GMCSDHC4) won`t reboot when it`s hot<br />
** 8GB microSDHC Class 4 (KM08GMCSDHC41A) won`t reboot when it`s hot<br />
* '''Kingston''' <br />
** 2GB SD<br />
** 2GB microSD (N0185-002.A00LF) + Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510)<br />
** 4GB microSD Class 4<br />
** 4GB SDHC Class 4 (SD4/4GB)<br />
** 4GB SDHC Class 10 (SD10V/4GB)<br />
** [http://img341.imageshack.us/img341/1619/dsc0253y.jpg 8GB SDHC Class 4] ([http://img833.imageshack.us/img833/2028/dsc0254br.jpg SD4/8GB]) (does not work with current build of raspbmc)<br />
** [http://img600.imageshack.us/img600/3849/dsc0251et.jpg 8GB microSDHC Class 4] ([http://img707.imageshack.us/img707/363/dsc0252ld.jpg SDC4/8GB])<br />
** 8GB SDHC Class 6 (SD6/8GB) (errors on boot, boots Debian ok, does not work with raspbmc rc2)<br />
** 8GB SDHC Class 10 (SD10G2/8GB, SD10V/8GB, ultimateX 100X, ultimateX 120X)<br />
** 16GB SDHC Class 4 (SD4/16GB)<br />
** 16GB microSDHC Class 10 (SDC10/16GB)<br />
** 16GB SDHC Class 10 (SD10G2/16GB, ultimateX 100X)<br />
** 16GB SDHC Class 10 (SD4/16GBET)<br />
** 32GB SDHC Class 10 (SD10V)<br />
** 32GB SDHC Class 10 (SD10G2/32GB, ultimateX 100X)<br />
* '''Kodak''' <br />
** 4GB SDHC Class 2<br />
** 8GB SDHC Class 4<br />
* '''Kruidvat''' <br />
** 8GB SDHC Class 4<br />
* '''Lexar''' <br />
** 4GB SDHC Class 4 (Boots consistently and no error messages in log after 1/2 hour use ) (works with Raspbmc)<br />
** 4GB SDHC Class 6 Platinum II (from [http://www.microcenter.com/single_product_results.phtml?product_id=0350735 Microcenter])<br />
** 8GB SDHC Class 4<br />
** 8GB SDHC Class 6 Premium Series<br />
** 8GB SDHC Class 6 Platinum II<br />
** 16GB SDHC Class 6 Platinum II<br />
** 32GB microSDHC HIGH-SPEED Class 10 (from [http://www.amazon.co.uk/Lexar-32GB-Micro-Speed-Reader/dp/B004BR2ZTM Amazon])<br />
** 128GB SDXC UHS-I Card LSD128CTBNA400 (from [http://www.amazon.com/gp/product/B007BZRXK2 Amazon])<br />
* '''Master'''<br />
** 16GB SDHC Class 10 [man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0]<br />
* '''Medion'''<br />
** 8GB Class 4 SDHC UK sourced (Aldi)<br />
* '''Microcenter Brand (sold in bins at checkout)'''<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0289508 8GB SDHC Class 4]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349728 8GB SDHC Class 10]<br />
** [http://www.microcenter.com/single_product_results.phtml?product_id=0349729 16GB SDHC Class 10]<br />
* '''Mushkin'''<br />
** 16GB SDHC Class 10 (MKNSDHCU1-16GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226324]<br />
** 32GB SDHC Class 10 (MKNSDHCC10-32GB) [http://www.newegg.com/Product/Product.aspx?Item=N82E16820226235]<br />
* '''Mustang'''<br />
** [http://www.mustang-flash.de/Products/Flash%20Products/Secure%20Digital/SD-Card/8GB%20Mustang%20SDHC%20Card%20LeMans%2C%20Class%2010%2C%20Retail|SD8GHCCL10MU-R.html 8GB SDHC Class 10]<br />
* '''MyMemory''' <br />
** 8GB SDHC Class 10 (MYMESDH8G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-8GB-SD-Card-%28SDHC%29---Class-10 MyMemory 8GB class 10] (Latest batch not working)<br />
** 16GB SDHC Class 10 (MYMESDH16G10) [http://www.mymemory.co.uk/SDHC/MyMemory/MyMemory-16GB-SD-Card-(SDHC)---Class-10]<br />
* '''NovaTech'''<br />
** 8GB SDHC Class 10 (Integral Branded)<br />
* '''OCZ'''<br />
** 8GB SDHC Class 6 Gold Series (08110596-8GB-6) tested with Debian Squeeze (official Raspberry Pi distribution debian6-19-04-2012.zip)<br />
* '''Optima'''<br />
** 8GB SDHC Class 10 (Pro-Speed)<br />
** 8GB SDHC Class 4 - working from 2012-09-18<br />
* '''Panasonic''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 10 UHS-I (~11.2MB/s read, ~6.2MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 2 (~11.1MB/s read, ~9.7MB/s write, following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (~4.8MB/s read, ~4.4MB/s write, following [[RPi_Performance#SD_card]])<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PSF8GSDHC10-PC)<br />
** 8GB SDHC Class 10 LX Series (PSF8GSDHC10-PC1)<br />
** 16GB SDHC Class 10 (PSF16GMCSDHC10)<br />
** 16GB SDHC Class 10 LX Series (PSF16GSDHC10) (19.3MB/s read, 9.3MB/s write)<br />
** 16GB microSDHC Class 10 (PSF16GMSHC10) (requires recent kernel update for boot)<br />
** 32GB SDHC Class 10 (PSF32GSDHC10)<br />
** 32GB SDHC Class 10 UHS-1 (PEF32GSDHC10U1) (20.4MB/s read, 12.1MB/s write)<br />
* '''Peak''' <br />
** 4GB microSDHC Class 4 (MMBTR04GUBCA-ME) tested with Arch<br />
* '''Philips'''<br />
** 8GB SDHC Class 4 (FM08SD35B)<br />
* '''Platinum'''<br />
** 4GB SDHC Class 6<br />
** 8GB SDHC Class 6 (man:0x00006f oem:0x0000 name:SMI hwrev:0x1 fwrev:0x0)<br />
** 64GB SDCX Class 10<br />
* '''Play.com''' <br />
** 4GB SDHC Class 6 (S4E3CD04GEFAA 0907090121106)<br />
* '''PNY''' <br />
** 4GB SDHC Class 4<br />
** 4GB SDHC Class 4 Optima (SD-K04G 0834TT1297Y)<br />
** 4GB SDHC Class 4. Micro SD Card with adapter.<br />
** 8GB SDHC Class 6<br />
** 8GB SDHC Class 10. Micro SD card with adapter.<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 10 (P-SDHC16G10-GE)<br />
*** See the note for P-SDHC16G10-EF. Works with Wheezy, does not work with Squeeze, Arch, or Fedora Remix. <br />
** 16GB SDHC Class 10 (P-SDHC16G10-EF) <br />
*** Works with [http://www.raspberrypi.org/archives/1435 Debian Wheezy]<br />
*** Does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
*** Does not work with Arch Linux Arm (archlinuxarm-29-04-2012: no video is displayed, solid red power light, tiny green light)<br />
** 16GB SDHC Class 10 Pro-Elite (P-SDH16U1-30-GE). Works with raspbmc, haven't tested others.<br />
* '''pqi'''<br />
** 8GB SDHC Class 6 <br />
*** Works with official debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 (8DK52-122ME)<br />
* '''Samsung''' <br />
** 4GB SDHC<br />
** 8GB SDHC Class 6 (MB-SS8GAEU)<br />
** 8GB SDHC Class 10 (MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM)<br />
** 16GB SDHC Class 6 (MB-SSAGAEU)<br />
** 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy], but does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).<br />
* '''SanDisk''' <br />
** 2GB SD, white "SanDisk for Wii" branded, no class mentioned<br />
** 2GB SD (with a circle 2 --probably class 2), writes at 3.5 Mb/s<br />
** 2GB SD Class 2 (BE0816113150D)<br />
** 2GB SD Class 4 Ultra (15MB/s)<br />
** 2GB SD Class 4 Ultra II<br />
** 2GB SD Ultra II (BE0719111366D)<br />
** 2GB SD Extreme III (BE0715105083B)<br />
** 2GB SD Extreme III (BE0804212046D) - 20MB/s - Class 6<br />
** 4GB SDHC Class 2 (BH0820113475D) - Tested with RPITC (Based on Raspbian Wheezy)<br />
** 4GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 4GB SDHC Class 4 (SDSDB-004G-B35)<br />
** 4GB SDHC Class 4 (SDSDB-004G-BT35). Confirmed working with stock debian6-19-04-2012.img<br />
** 4GB SDHC Class 4 (BH1210821913G)<br />
** 4GB SDHC Class 4 (SDSDH2-004G-AC11, BH1127216239D) Costco 2-pack, booting Wheezy 2012-07-15<br />
** 4GB SDHC Class 4 Ultra (SDSDH-004G-U46) won`t reboot when it`s hot<br />
** 4GB SDHC Class 4 Ultra II<br />
** 4GB SDHC Class 6 Ultra (30MB/s BH1200421822D)<br />
** 4GB SDHC Class 6 Ultra (SDSDH-004G-U46 - BH1136121837G, BH1130521822D)<br />
** 4GB SDHC Class 10 Extreme (BH10297143382G)<br />
** 8GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 8GB SDHC Class 4 (writes at ~1.5MB/s)<br />
** 8GB SDHC Class 4 Ultra labelled as 15MB/s (BI1024716014G)<br />
** 8GB SDHC Class 6 Ultra <br />
** 8GB SDHC Class 6 micro - MMAGR08GUDCA-DB<br />
*** also SDSDH-008G-U46 - BI1131222083D see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
*** except SDSRH-008G-A11 could be problematic, see below<br />
** 8GB SDHC Class 6 Ultra labelled as 20MB/s (BI11321422083D)<br />
** 8GB SDHC-I Class 6 Ultra labelled as 30MB/s (SDSDH2-008G-AC11)<br />
*** requires updated Squeeze or Wheezy beta<br />
** 8GB SDHC Class 10 Extreme (BI11017514367G)<br />
** 8GB SDHC Class 10 Extreme (B11209116254G) - Managed to get it working with raspbian R3 [http://archive.raspbian.org/images/rpi_pisces_r3.zip rpi_pisces_r3.zip] however does not work with official squeeze nor Arch linux.<br />
** 8GB SDHC Class 10 Extreme (30MB/s HD Video) - working with new [https://github.com/raspberrypi/firmware/blob/9308c7ed387e5422883753f7fb71a75506abd1f8/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-10 for Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 images (BI1130916254G).<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-U46) - Works with stock debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (works with OpenELEC r11493)<br />
** 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-UDQ46) - Works with stock 2012-09-18-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme (SDSDX-008G-X46/BI1218822414G) - Works with stock 2012-08-16-wheezy-raspbian<br />
** 8GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-008G-X46) - Works with stock 2012-07-15-wheezy-raspbian<br />
** 16GB SDHC Class 4<br />
** 16GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 16GB SDGC Class 4 (SDSDB-016G-B35) - working with [https://github.com/raspberrypi/firmware/blob/234c19de7cbaaf4997671d61df20a05759066295/boot/bootcode.bin bootcode.bin]. Confirmed on 2012-07-15 for Debian Squeeze 2012-04-19<br />
** 16GB SDHC Class 6 Ultra (30MB/s) (BL1133921933G) - Work with OpenELEC r11324<br />
** 16GB SDHC Class 10 Ultra(30MB/s) (SDSDU-016G-U46) - Work with stock debian6-19-04-2012 image. Gave Kernel Panic with stock debian6-19-04-2012 image. Worked fine with Wheezy image.<br />
** 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Works with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02)<br />
** 16GB SDHC Class 10 Extreme (45MB/s U1) (BL1203322025G) - Works with 2012-08-16-wheezy-raspbian.img (tested 2012-09-15). Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 16GB SDHC Class 10 Extreme (45MB/s) (SDSDXPA-016G-FPP) - Working with latest RaspBMC image (tested 12/09/2012) [http://www.amazon.co.uk/gp/product/B00422J0CG/ref=oh_details_o00_s00_i00 Amazon Link]<br />
** 16GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-016G-A75) - Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel<br />
** 32GB SDHC Class 4<br />
** 32GB SDHC Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** 32GB SDHC Class 6<br />
** 32GB SDHC Class 10 Ultra (30MB/s) - Works with stock debian6-19-04-2012 image<br />
** 32GB SDHC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-032G-X46) - works with arch-04-29-image and latest firmware (booting problems without firmware update)<br />
** 64GB SDXC Class 10 Extreme (45 MB/s UHS-I) (SDSDX-064G-X46) - works with 2012-07-15-wheezy-raspbian<br />
** microSDHC / microSDXC<br />
*** 4GB microSDHC Class 2<br />
*** 4GB microSDHC Class 4<br />
*** 8GB microSDHC Class 2<br />
*** 8GB microSDHC Class 4<br />
*** 8GB microSDHC Class 6 Mobile Ultra (SDSDQY-008G-U46A) working with the latest firmware, won`t reboot when it`s hot<br />
*** 8GB microSDHC Class 10 Ultra(30MB/s) (SDSDQU-008G-U46) tested and working on Raspbian wheezy (and RaspBMC)<br />
*** 16GB microSDHC Class 10 Mobile Ultra (SDSDQUA-016G-U46A) working with the latest firmware<br />
*** 32GB microSDHC Class 4 (SDSDQM-032G-B35)<br />
*** [http://img217.imageshack.us/img217/6435/dsc0255uc.jpg 64GB microSDXC Class 6 Mobile Ultra] (SDSDQY-064G-A11A) (boots up much more consistently with latest firmware)<br />
* '''Silicon Power''' <br />
** 4GB microSDHC Class 6 (SP004GBSTH006V10-SP)<br />
** 8GB microSDHC Class 10 (S608G1202)<br />
** 16GB microSDHC Class 10 (SP016GBSDH010V10)<br />
* '''Sony'''<br />
** 4GB SDHC Class 4 (SF-4B4) (Write 6MB/s, Read 20MB/s)<br />
** 4GB SDHC Class 4 (SF-4N4)<br />
** 8GB SDHC Class 4 (Write 11.8MB/s, Read 17.4MB/s)<br />
** [http://store.sony.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&partNumber=SF32NX/TQ#features 32GB SDHC Class 10 (SF-32NX/TQ)] (Max read speed of ~94MB/s, min write speed of ~10MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012) <br />
* '''Strontium'''<br />
** 8GB SDHC Class 10 (SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492))<br />
* '''Super Talent'''<br />
** 32GB Secure Digital High Capacity SDHC Card (Class 10), Model SDHC32-C10 SKU: 116-557-001 (works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian))<br />
* '''TakeMS'''<br />
** 4GB microSDHC Class 4 (with adapter) [http://www.takems.com/products.php?categ=flash&prod=Micro_SDHC-Card Micro SDHC Class 4 + 1 Adapter(Order No.88662)]<br />
* '''TDK'''<br />
** 4GB SDHC Class 4 (1008WW5261B)<br />
** 4GB SDHC Class 4 (80-56-10275-004G,Debian works '''BUT''' mmc0 errors when booting Fedora)<br />
** 4GB microSDHC Class 4 (80-56-10301-004G)<br />
** 4GB SDHC Class 6 (S404G1113) - Works with Debian Wheezy (2012-06-18 beta), not tried latest OpenELEC yet.<br />
** 8GB SDHC Class 10 - Works with Raspbian 2012-07-15<br />
** Sandisk 64GB Class 10 Ultra SDXC UHS-I FFP (3A114807)<br />
<br />
* '''Toshiba'''<br />
** 8GB mircoSDHC SD-C08GJ(BL3A<br />
** 16GB SDHC Class 10 SD-T16G (1046 US7022 C)<br />
* '''Transcend'''<br />
** 4GB SDHC Class 4 - we've found these to work without any errors and offer reasonable performance<br />
** 4GB SDHC Class 4 (TS4GSDHC4 - BH1130821915G)<br />
** 4GB SDHC Class 6 (TS4GSDHC6) - no problems. (does not work with Raspbmc as of 6/1/12)<br />
** 4GB SDHC Class 10 (TS4GSDHC10E)<br />
** [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-(SDHC)---Class-4 8GB SDHC Class 4] (TS8GSDHC4) (man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions.<br />
** 8GB SDHC Class 6 (~5.8 MB/s read/write following [[RPi_Performance#SD_card]])<br />
** 8GB SDHC Class 6 (TS8GSDHC6-P2 - MMBFG08GWACA-M6)<br />
** 8GB SDHC Class 10 (TS8GSDHC10) [http://www.mymemory.co.uk/SDHC/Transcend/Transcend-8GB-SD-Card-%28SDHC%29---Class-10- Transcend 8G class 10]<br />
** 16GB SDHC Class 6 (TS16GSDHC6)<br />
** 16GB SDHC Class 10 (TS16GSDHC10)(TS16GSDHC10E)<br />
** [http://www.transcend.com.es/tarjetas-de-memoria/sd-sdhc/32gb-sdhc-class-10 32GB SDHC Class 10] (TS32GSDHC10)(TS32GSDHC10E)<br />
** 64GB SDXC Class 10 (TS64GSDXC10)<br />
* '''Verbatim'''<br />
** 8GB SDHC Class 10 (43961)<br />
** 16GB SDHC Class 10 (43962)<br />
** 32GB SDHC Class 6 (44032)<br />
<br />
*'''Traveler'''<br />
**4GB High Speed Memory Card - no class mentioned. No problems. Tested with Raspbian.<br />
<br />
* '''The Pi Hut'''<br />
** Sandisk 4GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/4gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 8GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/8gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 16GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/16gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
** Sandisk 32GB Class 4 - Preinstalled with Raspbian Wheezy Linux. (from [http://thepihut.com/products/32gb-sandisk-sd-sdhc-card-with-raspbian-wheezy-linux-preinstalled The Pi Hut's Raspberry Pi Store])<br />
<br />
* '''V-Gen'''<br />
** 8GB microSDHC - no class mentioned. No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc. <br />
<br />
* '''Veho (http://www.veho-uk.com)'''<br />
** 8Gb "Ultra Fast" Class 6. (man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux.<br />
<br />
* '''W Photo (Walgreens photo)'''<br />
** 1GB SD memory card. Works with raspbmc, have not tested others.<br />
** 2GB SD memory card. Works with raspbian, not tested with others.<br />
<br />
Known good (and pre-loaded) cards will be available for sale from RS and element14 at a ''later'' date (TBA).<br />
<br />
===Problem SD Cards===<br />
<br />
Make sure that you buy your card from a reliable source. There are many cheap Chinese copies of (brand name) SD-Cards on the market, [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit/] in addition they are often mislabeled as having greater capacity than they really have. For example they might be sold as being 4GB, but are actually 2GB (or even less). <br />
<br />
There were initially issues with most Class 10 SDHC cards, apparently due to a bug in the Broadcom bootloader.[http://www.raspberrypi.org/forum/general-discussion/class-10-sd-cards-on-the-production-boards/page-3/#p39181]<br />
<br />
This seems to have been fixed in sdhci.c: [https://github.com/raspberrypi/linux/commit/7e8ae226fe6e95954df6b0dcdde40a53dbbc1a0b] Further feedback will be useful.<br />
<br />
If you add an SD card here, please also mention the kernel date and the date you tried it. This allows people to estimate how likely it is that a driver-fix in the kernel has been fixed. (i.e. I think some/most of the cards here work fine now, because a problem in the kernel driver has been fixed). <br />
<br />
* '''Acumem'''<br />
** 8GB SDHC Class 6 (many errors on 6/7/2012)<br />
* '''Adata'''<br />
** 2GB Speedy (MMAGF02GWMCA -NA)<br />
** 8GB SDHC Class 6 - Sometimes boots<br />
** 16GB SDHC Class 6 (Possibly SD5MY168G0, label with gold <> black gradient) - Doesn't boot<br />
* '''Agfa'''<br />
** 16GB MicroSDHC class 6 (as written on SD-Adapter, MicroSD card itself no-name? ENAAJK121960): mixed results, such a card was working on another RPi<br />
* '''Amazon Basics'''<br />
** 16GB SDHC Class 10 (many errors on 6/7/2012)<br />
* '''Delkin Devices'''<br />
** 4GB SDHC Class 6 "Delkin pro" -- Note: works with Fedora Beefy Miracle 17<br />
* '''GSkill'''<br />
** 32GB SDHC Class 10<br />
* '''Integral'''<br />
** 16GB SDHC Class 6 Ultima Pro (SH016GAA2BB)<br />
** 4GB SDHC class 4 (S404G1115)<br />
* '''Kingston''' <br />
** 2GB SD [http://www.geeks.com/details.asp?invtid=KING-SD-M02G-BULK looks like this] - boots the kernel, but damages the filesystem.<br />
** 4GB SDHC Class 6 - Boots kernel but won't run init (times out)<br />
** 8GB/Go SDHC Class 10 - SD10V/8GB Very slow writing images to card and then either won't boot, or boots very slowly<br />
** 16GB SDHC Class 4 (SDC4/16GB17) - Device does not recognize it <br />
* '''Memory2GO'''<br />
** 4GB SDHC Class 6 (S404G1029) - I/O Errors leading to Kernel Panic on startup.<br />
* '''Micro Center'''<br />
**4GB SDHC Class 4 — hasn't worked with any of the images I've tried; appears to be completely unrecognized<br />
* '''MyMemory.com''' <br />
** 8GB SDHC Class 10<br />
<br />
* '''Optima''' <br />
** <del>8GB SDHC Class 4 - Does not boot with Raspbian Wheezy 2012-07-15</del> - works with 2012-09-18 <br />
<br />
* '''Panasonic''' <br />
** 8GB SDHC Class 10 (RP-SDU08GD1K) mmc0: timeout waiting for hardware interrupt [http://www.mymemory.co.uk/SDHC/Panasonic/Panasonic-8GB-UHS-1-London-2012-Collection-SDHC-Card---Class-10 Panasonic 8GB Class 10]<br />
* '''Patriot''' <br />
** 8GB SDHC Class 6 (PS8GSDHC10-BC) - repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian<br />
** 8GB SDHC Class 10 (PSF8GSDHC10)<br />
** 8GB SDHC Class 10 (PSF8GSDHC10-PC) - won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc.). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore).<br />
* '''Platinum''' <br />
** 8GB SDHC Class 8 (O08G840 M3100487 TW)<br />
** 16GB SDHC Class 10 (article code 177117) - Does not boot with Raspbian Wheezy 2012-09-12<br />
* '''PNY'''<br />
** 8GB Optima SDHC 120 HD Class 4 SD-K08G 0928 WF3673 - mmc -110 errors at init time on 6/12/12<br />
** 8GB Premium SDHC Class 4 - mmc - mmc0: timeout waiting for hardware interrupt<br />
** 32GB SDHC Class 10 Professional (P-SDHC32G10-EF) from [http://www.play.com/Electronics/Electronics/4-/18814903/-/Product.html play.com] (mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)<br />
** 2GB card SD-M02G<br />
* '''Polaroid'''<br />
** 16GB SDHC C10 (P-SDHC16GB10-EFPOL) - mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012<br />
* '''PRETEC''' <br />
** 8GB SDHC Class 10 233x - mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic, ...<br />
* '''Reekin'''<br />
** 4Gb HighSpeed SH4GC6M16MIN9C0812TE (old) don't boot ! (11/07/2012)<br />
* '''Samsung'''<br />
** 4GB SDHC Class 4 (MB-SS4G MBSS4GMBDDBA-DD) doesn't boot with [http://downloads.raspberrypi.org/images/raspbian/2012-07-15-wheezy-raspbian/2012-07-15-wheezy-raspbian.zip 2012-07-15-wheezy-raspbian] - OK light partially lit.<br />
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt), but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy]<br />
* '''SanDisk''' <br />
** 2GB SD Extreme III (BE0722702998D) (man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)<br />
** 2GB SD (BE0916214253D)<br />
** 2GB Ultra || 15MB/s (BE0828713280D)<br />
** 4GB SDHC Class 2 - Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt.<br />
** 4GB SDHC Class 2 "Limited Edition" (8H825413279G) - Error -110 whilst initialising sd card<br />
** 4GB SDHC Class 4 (BH1030216016G) - Doesn't boot.<br />
** 4GB SDHC Class 4 (BH1031116016G) - Doesn't boot.<br />
** 4GB SDHC Class 6 Extreme (BH0822411730D)<br />
** 4GB SDHC Class 6 Extreme III (30 MB/s) (BH0822712362G)<br />
** 4GB SDHC Class 10 Extreme (SDSDX-004G-X46) (30 MB/s HD Video) doesn't boot (also not with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta)<br />
** 4GB SDHC Class 10 Extreme (30 MB/s HD Video) (Doesn't boot) - Works with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot]<br />
** 4GB microSDHC Class 6 Mobile Ultra (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found<br />
** 8GB SDHC Class 6 Ultra (B11201421964G)<br />
** <del>8GB SDHC Class 6 Ultra (SDSDH-008G-U46 - BI1131222083D) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )</del> see [http://www.raspberrypi.org/phpBB3/viewtopic.php?p=88625#p88625 update from andrew.blake]<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s (BI1208721965G)) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSRH-008G-A11 - Boots kernel but won't run init ( mmc timeout waiting for interrupt ) <br />
** 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSDH-008G-T11 - Boots kernel but won't run init ( debian6-19-04-2012: mmc timeout waiting for interrupt ) , but works fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy] on 6/22/12<br />
** 8GB SDHC Class 6 Ultra I (BI1201221964G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** 8GB SDHC Class 6 Extreme (BI1101116253G)<br />
** 8GB SDHC Class 10 Extreme (BI1108716254G)<br />
** 8GB SDHC Class 10 Extreme (BI1201416254G) - Still doesn't work with Debian Wheezy beta (2012-06-18)<br />
** <del>8GB SDHC Class 10 Extreme (BI1201516254G) [[http://www.amazon.co.uk/gp/product/B00422FBJ2 amazon.co.uk]]+amazon.fr</del> works with wheezy 19/09/2012<br />
** 8GB SDHC Class 10 Extreme (BI1200916252D/SDSDX-008G-X46) - Tried with Debian "Squeeze"(19/04/2012), Debian "Wheezy"(18/06/2012) and Arch Linux(13/06/2012). None works. With Debian "Wheezy" Green LED stays ON continuously, with the other two it turns on very faint.<br />
** 8GB SDHC Class 10 Extreme Pro- Works with updated kernel/firmware, stock debian6-19-04-2012 boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
** <del>16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Doesn't boot with debian6-19-04-2012.img, or newer firmware (tested 2012-06-17).</del><br />
** 16GB SDHC Class 6 Ultra (BL1202021933G)<br />
** 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )<br />
* '''Silicon Power''' <br />
** 32GB SDHC Class 6 (LS2N732GQON03ASP) - boots debian6-19-04-2012.img, but frequent slow response / system hangs.<br />
<br />
* '''TDK'''<br />
** 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new kernel.img and start.elf [https://github.com/raspberrypi/firmware/tree/master/boot] but still won't run init.<br />
** 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried (4th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github [https://github.com/raspberrypi/firmware/tree/87a04c0be0c05e20f94f223183a0310b37c9bd89/boot] but still got 'Error -84' and 'Kernel panic - not syncing: No init found'<br />
<br />
* '''Transcend'''<br />
** 2GB MicroSD (MMAGR02GUECA-MB) - reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots.<br />
** 32GB MicroSD (TS32GUSDHC4) - Doesn't boot.<br />
** 2GB SD (6451AG 2G O2DS1)<br />
** 16GB SD Class10 (TS16GSDHC10U1) - Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"<br />
* '''Veho'''<br />
** 4GB SDHC Class 6 <br />
* '''Verbatim'''<br />
** 16GB SDHC Class 6 (47178) - Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt<br />
** 8GB microSD Class 10 (44012) - ArchLinux - boots, but after system update develops segmentation faults<br />
<br />
The usual warnings against less reputable sellers (such as Ebay merchants) apply.<br />
<br />
<br />
Note that the following error is sometimes accompanied with a non-working SD card after booting (on Debian):<br />
<br />
mmc0: timeout waiting for hardware interrupt<br />
<br />
=== Benchmarks ===<br />
<br />
* http://www.sakoman.com/OMAP/microsd-card-perfomance-test-results.html<br />
* http://usbspeed.nirsoft.net/usb_drive_speed_summary.html?o=11<br />
* http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076<br />
* http://forum.xda-developers.com/showthread.php?t=1005633 (Doesn't originate from R-Pi, but very related)<br />
<br />
== Foreign Language Translations ==<br />
* [[Ru:RaspberryPiBoardVerifiedPeripherals]]<br />
<br />
== References ==<br />
<references><br />
</references><br />
<br />
{{Template:Raspberry Pi}}</div>Lob0426