http://elinux.org/api.php?action=feedcontributions&user=Prpplague&feedformat=atom
eLinux.org - User contributions [en]
2013-05-19T15:03:56Z
User contributions
MediaWiki 1.21alpha
http://elinux.org/User:Meanbot
User:Meanbot
2013-05-17T20:53:08Z
<p>Prpplague: Creating user page for new user.</p>
<hr />
<div>https://github.com/meanbot/</div>
Prpplague
http://elinux.org/User_talk:Meanbot
User talk:Meanbot
2013-05-17T20:53:08Z
<p>Prpplague: Welcome!</p>
<hr />
<div>'''Welcome to ''eLinux.org''!'''<br />
We hope you will contribute much and well.<br />
You will probably want to read the [[Help:Contents|help pages]].<br />
Again, welcome and have fun! [[User:Prpplague|Prpplague]] ([[User talk:Prpplague|talk]]) 20:53, 17 May 2013 (UTC)</div>
Prpplague
http://elinux.org/Userpace_Arduino
Userpace Arduino
2013-05-17T20:45:43Z
<p>Prpplague: Created page with "this page is to document some research on creating a userspace executable using the wiring and processing language used with Arduino. = Transfer Options = == Netcat == * ..."</p>
<hr />
<div>this page is to document some research on creating a userspace executable using the wiring and processing language used with Arduino.<br />
<br />
<br />
<br />
= Transfer Options =<br />
<br />
== Netcat ==<br />
<br />
* needs to tar/zip the files<br />
<br />
<br />
== ssh/scp ==<br />
<br />
* needs authentication<br />
<br />
<br />
== arduino bootloader over usb ==<br />
<br />
* requires application running on usb gadget</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-17T16:03:21Z
<p>Prpplague: /* Supported Capes */</p>
<hr />
<div>* The BeagleBone Black essentially is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC<br />
** HDMI Cape for on board video<br />
** Audio Cape for audio through HDMI<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg]]<br />
<br />
= Supported Capes =<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each.<br />
* '''Mechanical''' means that the cape has been physcially plugged into a BeagleBone Black and has no clearance issues.<br />
* '''Hardware Support''' means that the cape will electrically work with the BeagleBone Black.<br />
* '''Software Support''' means that the cape is supported in the bootable linux distribution image that ships with the BeagleBone Black.<br />
<br><br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||YES||YES||Must be revision A2 or better<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||YES||YES||Functional testing complete<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-17T16:01:53Z
<p>Prpplague: /* Supported Capes */</p>
<hr />
<div>* The BeagleBone Black essentially is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC<br />
** HDMI Cape for on board video<br />
** Audio Cape for audio through HDMI<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg]]<br />
<br />
= Supported Capes =<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each.<br />
* '''Mechanical''' means that the cape has been physcially plugged into a BeagleBone Black and has no clearance issues.<br />
* '''Hardware Support''' means that the cape will electrically work with the BeagleBone Black.<br />
* '''Software Support''' means that the cape is supported in the bootable linux distribution image that ships with the BeagleBone Black.<br />
<br><br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||YES||YES||Must be revision A2 or better<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||YES||YES||Functional testing complete<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T19:24:16Z
<p>Prpplague: /* Supported Capes */</p>
<hr />
<div>* The BeagleBone Black essentially is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC<br />
** HDMI Cape for on board video<br />
** Audio Cape for audio through HDMI<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg]]<br />
<br />
= Supported Capes =<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each.<br />
* '''Mechanical''' means that the cape has been physcially plugged into a BeagleBone Black and has no clearance issues.<br />
* '''Hardware Support''' means that the cape will electrically work with the BeagleBone Black.<br />
* '''Software Support''' means that the cape is supported in the bootable linux distribution image that ships with the BeagleBone Black.<br />
<br><br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T19:20:32Z
<p>Prpplague: /* Supported Capes */</p>
<hr />
<div>* The BeagleBone Black essentially is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC<br />
** HDMI Cape for on board video<br />
** Audio Cape for audio through HDMI<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg]]<br />
<br />
= Supported Capes =<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each.<br />
* '''Hardware Support''' means that the cape will electrically work with the BeagleBone Black.<br />
* '''Software Support''' means that the cape is supported in the bootable linux distribution image that ships with the BeagleBone Black.<br />
<br><br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T17:32:54Z
<p>Prpplague: /* BeagleBone Black Reserved Signals */</p>
<hr />
<div>* The BeagleBone Black essentially is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC<br />
** HDMI Cape for on board video<br />
** Audio Cape for audio through HDMI<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg]]<br />
<br />
= Supported Capes =<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each<br><br />
<br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T17:32:14Z
<p>Prpplague: /* Supported Capes */</p>
<hr />
<div>* The BeagleBone Black essentially is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC<br />
** HDMI Cape for on board video<br />
** Audio Cape for audio through HDMI<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg|320px]]<br />
<br />
= Supported Capes =<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each<br><br />
<br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T17:31:25Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essentially is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC<br />
** HDMI Cape for on board video<br />
** Audio Cape for audio through HDMI<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg|320px]]<br />
<br />
= Supported Capes =<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each<br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T17:30:12Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* MMC signals P8[25:20] and P8[6:3]<br />
* LCD signals P8[46:27]<br />
* AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg|320px]]<br />
<br />
= Supported Capes =<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T17:29:51Z
<p>Prpplague: </p>
<hr />
<div>= Compatibily Errata =<br />
* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each<br />
<br />
= BeagleBone Black Reserved Signals =<br />
* MMC signals P8[25:20] and P8[6:3]<br />
* LCD signals P8[46:27]<br />
* AUDIO signals P9[31] and P9[29:28]<br />
<br />
<br />
[[File:Bbb-cape-pinout.jpg|320px]]<br />
<br />
= Supported Capes =<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T17:24:28Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}<br />
<br />
[[File:Bbb-cape-pinout.jpg]]</div>
Prpplague
http://elinux.org/File:Bbb-cape-pinout.jpg
File:Bbb-cape-pinout.jpg
2013-05-16T17:24:09Z
<p>Prpplague: </p>
<hr />
<div></div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T17:23:42Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}<br />
<br />
[[File:Bbb-cape-pinout.jpg|thumbnail]]</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T14:50:38Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#30FFFF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T14:50:13Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:#AAA0FF"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T14:49:06Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned||Notes<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED||<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES||<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES||<br />
|- style="background:blue"<br />
|Memory Cape||PASS||NC||USED||USED||PASS||YES||NO||NO||This cape is sold for development purposes only<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO||<br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO||<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:55:39Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:53:39Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:49:13Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using AUDIO signals P9[31] and P9[29:28])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** AUDIO signals P9[31] and P9[29:28]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||AUDIO signals P9[31] and P9[29:28]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:19:42Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[46:27])<br />
** Audio Cape for audio through HDMI (using general signals P8[19:7])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[46:27]<br />
** General signals P8[19:7]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[46:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:18:23Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[48:27])<br />
** Audio Cape for audio through HDMI (using general signals P8[19:7])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[48:27]<br />
** General signals P8[19:7]<br />
<br><br />
<br><br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:17:24Z
<p>Prpplague: </p>
<hr />
<div>* The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
** Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
** HDMI Cape for on board video (using LCD signals P8[48:27])<br />
** Audio Cape for audio through HDMI (using general signals P8[19:7])<br />
* When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
* Each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
** MMC signals P8[25:20] and P8[6:3]<br />
** LCD signals P8[48:27]<br />
** General signals P8[19:7]<br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:13:49Z
<p>Prpplague: </p>
<hr />
<div>The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
<br />
* Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
* HDMI Cape for on board video (using LCD signals P8[48:27])<br />
* Audio Cape for audio through HDMI (using general signals P8[19:7])<br />
<br />
When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported at a time.<br />
each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each:<br />
* MMC signals P8[25:20] and P8[6:3]<br />
* LCD signals P8[48:27]<br />
* General signals P8[19:7]<br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:12:04Z
<p>Prpplague: </p>
<hr />
<div>The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
<br />
* Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
* HDMI Cape for on board video (using LCD signals P8[48:27])<br />
* Audio Cape for audio through HDMI (using general signals P8[19:7])<br />
<br />
When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported. each cape is listed with a column to indicate if the cape uses any of the same signals as the virtual cape for each of the MMC, LCD, and General signal groups.<br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:09:51Z
<p>Prpplague: </p>
<hr />
<div>The BeagleBone Black essential is an original BeagleBone with three virtual capes:<br />
<br />
* Memory Cape for on board eMMC (using MMC signals P8[25:20] and P8[6:3])<br />
* HDMI Cape for on board video (using LCD signals P8[48:27])<br />
* Audio Cape for audio through HDMI (using general signals P8[19:7])<br />
<br />
When adding a Cape to the BeagleBone Black, if the same signals are used for the on board virtual capes, then only one of these devices can be supported.<br />
<br />
{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T05:00:59Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||PASS||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:43:34Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:34:20Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:33:32Z
<p>Prpplague: Prpplague moved page Black capes to BeagleBone Black Capes</p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/Black_capes
Black capes
2013-05-16T04:33:32Z
<p>Prpplague: Prpplague moved page Black capes to BeagleBone Black Capes</p>
<hr />
<div>#REDIRECT [[BeagleBone Black Capes]]</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:32:46Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Breakout Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Breadboard Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||APPROVED<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:30:54Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:green"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NONE REQUIRED||YES<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:28:37Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|HDMI Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:25:56Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||YES||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||YES||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||YES||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:25:14Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Hardware Support||Software Support||Support Planned<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||YES||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||YES||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||YES||NO||YES<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||NO||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||NO||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:19:56Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Software Support||Support Planned<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||NO||YES<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||NO||YES<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:18:53Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Software Support||Support Planned<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||NO||YES<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||NO||NO<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||NO||YES<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:18:13Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Software Support||Support Planned<br />
|- style="background:yellow"<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||NO||YES<br />
|- style="background:yellow"<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:red"<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|- style="background:yellow"<br />
|Audio Cape||PASS||NC||USED||USED||USED||NO||YES<br />
|- style="background:red"<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||NO||NO<br />
|- style="background:yellow"<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|- style="background:yellow"<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||NO||YES<br />
|- style="background:red"<br />
|Memory Cape||PASS||NC||USED||USED||USED||NO||NO <br />
|- style="background:red"<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|- style="background:red"<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:15:50Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Software Support||Support Planned<br />
|-<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|-<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||NO||YES<br />
|-<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|-<br />
|Weather Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|-<br />
|DVI-D Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|-<br />
|Audio Cape||PASS||NC||USED||USED||USED||NO||YES<br />
|-<br />
|DVI-D w/Audio Cape||PASS||NC||USED||USED||PASS||NO||NO<br />
|-<br />
|Battery Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|-<br />
|LCD3 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|-<br />
|LCD4 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|-<br />
|LCD7 Cape||PASS||NC||USED||PASS||PASS||NO||YES<br />
|-<br />
|3.1MP Camera Cape||PASS||NC||PASS||USED||USED||NO||YES<br />
|-<br />
|Memory Cape||PASS||NC||USED||USED||USED||NO||NO <br />
|-<br />
|TiWi-5E Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|-<br />
|TiWi-BLE Cape||PASS||NC||USED||USED||USED||NO||NO<br />
|}</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:08:50Z
<p>Prpplague: </p>
<hr />
<div>{|border="3"<br />
|+BeagleBone Black Cape Compatibility Matrix<br />
!Board||Mechanical||P9-Battery||LCD P8[48:27]||EMMC P8[25:20] P8[6:3]||General P8[19:7]||Software Support||Recommended<br />
|-<br />
|RS-232 Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|-<br />
|RS-485 Cape||PASS||NC||PASS||USED||PASS||NO||YES<br />
|-<br />
|CAN Bus Cape||PASS||NC||PASS||PASS||PASS||NO||YES<br />
|}<br />
<br />
<br />
Weather Cape|PASS|NC PASS PASS PASS PASS YES<br />
DVI-D Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
Audio Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
DVI-D w/Audio Cape|PASS NC USED USED PASS Disable eMMC/audio/HDMI NO<br />
Battery Cape|PASS NC PASS PASS PASS PASS YES<br />
LCD3 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
LCD4 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
LCD7 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
3.1MP Camera Cape|PASS NC PASS USED USED Disable eMMC/Audio YES<br />
Memory Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO <br />
TiWi-5E Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
TiWi-BLE Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T04:00:04Z
<p>Prpplague: </p>
<hr />
<div>{|<br />
Board|Mechanical|P9-Battery|LCD P8[48:27]|EMMC P8[25:20] P8[6:3]|General P8[19:7]|Software|Recommended<br />
|-<br />
|RS-232 Cape|PASS|NC|PASS|PASS|PASS|PASS|YES<br />
|-<br />
|RS-485 Cape|PASS|NC|PASS|USED|PASS|Disable eMMC|YES<br />
|-<br />
|CAN Bus Cape|PASS|NC|PASS|PASS|PASS|PASS|YES<br />
|}<br />
<br />
<br />
Weather Cape|PASS|NC PASS PASS PASS PASS YES<br />
DVI-D Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
Audio Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
DVI-D w/Audio Cape|PASS NC USED USED PASS Disable eMMC/audio/HDMI NO<br />
Battery Cape|PASS NC PASS PASS PASS PASS YES<br />
LCD3 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
LCD4 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
LCD7 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
3.1MP Camera Cape|PASS NC PASS USED USED Disable eMMC/Audio YES<br />
Memory Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO <br />
TiWi-5E Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
TiWi-BLE Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO</div>
Prpplague
http://elinux.org/BeagleBone_Black_Capes
BeagleBone Black Capes
2013-05-16T03:56:16Z
<p>Prpplague: Created page with "{|Board|Mechanical|P9-Battery|LCD P8[48:27]|EMMC P8[25:20] P8[6:3]|General P8[19:7]|Software|Recommended|- |RS-232 Cape|PASS|NC|PASS|PASS|PASS|PASS|YES|- |RS-485 Cape|PASS|NC|..."</p>
<hr />
<div>{|Board|Mechanical|P9-Battery|LCD P8[48:27]|EMMC P8[25:20] P8[6:3]|General P8[19:7]|Software|Recommended|-<br />
|RS-232 Cape|PASS|NC|PASS|PASS|PASS|PASS|YES|-<br />
|RS-485 Cape|PASS|NC|PASS|USED|PASS|Disable eMMC|YES|-<br />
|CAN Bus Cape|PASS|NC|PASS|PASS|PASS|PASS|YES|-}<br />
<br />
<br />
Weather Cape|PASS|NC PASS PASS PASS PASS YES<br />
DVI-D Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
Audio Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
DVI-D w/Audio Cape|PASS NC USED USED PASS Disable eMMC/audio/HDMI NO<br />
Battery Cape|PASS NC PASS PASS PASS PASS YES<br />
LCD3 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
LCD4 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
LCD7 Cape|PASS NC USED PASS PASS Disable HDMI YES<br />
3.1MP Camera Cape|PASS NC PASS USED USED Disable eMMC/Audio YES<br />
Memory Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO <br />
TiWi-5E Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO<br />
TiWi-BLE Cape|PASS NC USED USED USED Disable eMMC/audio/HDMI NO</div>
Prpplague
http://elinux.org/Minnowboard:SPI_Boot_flash
Minnowboard:SPI Boot flash
2013-05-15T21:26:09Z
<p>Prpplague: /* Applications and Hardware */</p>
<hr />
<div>the [[Minnowboard:MinnowBoard|MinnowBoard]] uses a SPI based serial flash memory to load the initial code into the Intel Atom E640 series processor. The MinnowBoard uses a WinBond W25Q32 ([[media:winbond-w25q32.pdf|datasheet]]) which has a total of 4096KB of storage which can be flashed with a UEFI image or other custom firmware.<br />
<br />
= Programming Interface =<br />
<br />
the MinnowBoard has a 2x4 header that has 0.1" spacing for programming the SPI based serial flash memory.<br />
<br />
{|border="3"<br />
|+Programming Header<br />
!Pin number||Main Function||Note<br />
|-<br />
| 1<br />
| +3.3V Power<br />
| Supports on +3.3V<br />
|-<br />
| 2<br />
| GND<br />
| system ground<br />
|-<br />
| 3<br />
| nCS<br />
| Chip Select Active Low<br />
|-<br />
| 4<br />
| SCK<br />
| SPI Clock<br />
|-<br />
| 5<br />
| MISO<br />
| Data Output from serial flash<br />
|-<br />
| 6<br />
| MOSI<br />
| Data Input to serial flash<br />
|-<br />
| 7<br />
| NC<br />
| No Connection<br />
|-<br />
| 8<br />
| nPRG_EN<br />
| Program Enable Active Low<br />
|}<br />
<br />
= Applications and Hardware =<br />
<br />
*[http://flashrom.org/Flashrom Flashrom] is an open source utility that allows you to work with the SPI based serial flash memory on the MinnowBoard. <br />
* Flashrom supports a wide range of flash devices ([http://flashrom.org/Supported_hardware Supported Hardware]) including the WinBond W25Q32.<br />
* Flashrom can automatically detect the presence of the WinBond W25Q32 and provide full read/erase/write functionality. <br />
* Flashrom can use the many open as well as proprietary hardware tools such as<br />
** [http://www.dlpdesign.com/usb/2232h.shtml DLP-2232H] from [http://www.dlpdesign.com DLPDesign]<br />
** [http://www.ftdichip.com/Products/ICs/FT2232H.htm FTDI FT2232H] generic breakout boards<br />
** [[Flyswatter2]] from [http://www.tincantools.com TinCanTools]<br />
** [http://dangerousprototypes.com/docs/Bus_Pirate Bus Pirate] from [http://www.dangerousprototypes.com Dangerous Prototypes]<br />
** [http://www.dediprog.com/SPI-flash-in-circuit-programming/ISP-Evaluation-Kit SF100] from [http://www.dediprog.com DediProg]<br />
** [https://www.kernel.org/doc/Documentation/spi/spidev SPIDev] userspace interface for the Linux Kernel<br />
<br />
<br />
<br />
<br />
[[Category: MinnowBoard]]<br />
[[Category: CircuitCo]]</div>
Prpplague
http://elinux.org/Minnowboard:SPI_Boot_flash
Minnowboard:SPI Boot flash
2013-05-15T21:25:08Z
<p>Prpplague: /* Applications and Hardware */</p>
<hr />
<div>the [[Minnowboard:MinnowBoard|MinnowBoard]] uses a SPI based serial flash memory to load the initial code into the Intel Atom E640 series processor. The MinnowBoard uses a WinBond W25Q32 ([[media:winbond-w25q32.pdf|datasheet]]) which has a total of 4096KB of storage which can be flashed with a UEFI image or other custom firmware.<br />
<br />
= Programming Interface =<br />
<br />
the MinnowBoard has a 2x4 header that has 0.1" spacing for programming the SPI based serial flash memory.<br />
<br />
{|border="3"<br />
|+Programming Header<br />
!Pin number||Main Function||Note<br />
|-<br />
| 1<br />
| +3.3V Power<br />
| Supports on +3.3V<br />
|-<br />
| 2<br />
| GND<br />
| system ground<br />
|-<br />
| 3<br />
| nCS<br />
| Chip Select Active Low<br />
|-<br />
| 4<br />
| SCK<br />
| SPI Clock<br />
|-<br />
| 5<br />
| MISO<br />
| Data Output from serial flash<br />
|-<br />
| 6<br />
| MOSI<br />
| Data Input to serial flash<br />
|-<br />
| 7<br />
| NC<br />
| No Connection<br />
|-<br />
| 8<br />
| nPRG_EN<br />
| Program Enable Active Low<br />
|}<br />
<br />
= Applications and Hardware =<br />
<br />
*[http://flashrom.org/Flashrom Flashrom] is an open source utility that allows you to work with the SPI based serial flash memory on the MinnowBoard. <br />
* Flashrom supports a wide range of flash devices ([http://flashrom.org/Supported_hardware Supported Hardware]) including the WinBond W25Q32.<br />
* Flashrom can automatically detect the presence of the WinBond W25Q32 and provide full read/erase/write functionality. <br />
* Flashrom can use the many open as well as proprietary hardware tools such as<br />
** [http://www.dlpdesign.com/usb/2232h.shtml DLP-2232H] from [http://www.dlpdesign.com DLPDesign] or other generic FTDI FT2232H boards<br />
** [[Flyswatter2]] from [http://www.tincantools.com TinCanTools]<br />
** [http://dangerousprototypes.com/docs/Bus_Pirate Bus Pirate] from [http://www.dangerousprototypes.com Dangerous Prototypes]<br />
** [http://www.dediprog.com/SPI-flash-in-circuit-programming/ISP-Evaluation-Kit SF100] from [http://www.dediprog.com DediProg]<br />
** [https://www.kernel.org/doc/Documentation/spi/spidev SPIDev] userspace interface for the Linux Kernel<br />
<br />
<br />
<br />
<br />
[[Category: MinnowBoard]]<br />
[[Category: CircuitCo]]</div>
Prpplague
http://elinux.org/Minnowboard:SPI_Boot_flash
Minnowboard:SPI Boot flash
2013-05-15T21:22:01Z
<p>Prpplague: /* Programming Interface */</p>
<hr />
<div>the [[Minnowboard:MinnowBoard|MinnowBoard]] uses a SPI based serial flash memory to load the initial code into the Intel Atom E640 series processor. The MinnowBoard uses a WinBond W25Q32 ([[media:winbond-w25q32.pdf|datasheet]]) which has a total of 4096KB of storage which can be flashed with a UEFI image or other custom firmware.<br />
<br />
= Programming Interface =<br />
<br />
the MinnowBoard has a 2x4 header that has 0.1" spacing for programming the SPI based serial flash memory.<br />
<br />
{|border="3"<br />
|+Programming Header<br />
!Pin number||Main Function||Note<br />
|-<br />
| 1<br />
| +3.3V Power<br />
| Supports on +3.3V<br />
|-<br />
| 2<br />
| GND<br />
| system ground<br />
|-<br />
| 3<br />
| nCS<br />
| Chip Select Active Low<br />
|-<br />
| 4<br />
| SCK<br />
| SPI Clock<br />
|-<br />
| 5<br />
| MISO<br />
| Data Output from serial flash<br />
|-<br />
| 6<br />
| MOSI<br />
| Data Input to serial flash<br />
|-<br />
| 7<br />
| NC<br />
| No Connection<br />
|-<br />
| 8<br />
| nPRG_EN<br />
| Program Enable Active Low<br />
|}<br />
<br />
= Applications and Hardware =<br />
<br />
*[http://flashrom.org/Flashrom Flashrom] is an open source utility that allows you to work with the SPI based serial flash memory on the MinnowBoard. <br />
* Flashrom supports a wide range of flash devices ([http://flashrom.org/Supported_hardware Supported Hardware]) including the WinBond W25Q32.<br />
* Flashrom can automatically detect the presence of the WinBond W25Q32 and provide full read/erase/write functionality. <br />
* Flashrom can use the many open as well as proprietary hardware tools such as<br />
** [[Flyswatter2]] from [http://www.tincantools.com TinCanTools]<br />
** [http://dangerousprototypes.com/docs/Bus_Pirate Bus Pirate] from [http://www.dangerousprototypes.com Dangerous Prototypes]<br />
** [http://www.dediprog.com/SPI-flash-in-circuit-programming/ISP-Evaluation-Kit SF100] from [http://www.dediprog.com DediProg]<br />
** [https://www.kernel.org/doc/Documentation/spi/spidev SPIDev] userspace interface for the Linux Kernel<br />
<br />
<br />
<br />
<br />
[[Category: MinnowBoard]]<br />
[[Category: CircuitCo]]</div>
Prpplague
http://elinux.org/Minnowboard:SPI_Boot_flash
Minnowboard:SPI Boot flash
2013-05-15T21:21:23Z
<p>Prpplague: /* Programming Interface */</p>
<hr />
<div>the [[Minnowboard:MinnowBoard|MinnowBoard]] uses a SPI based serial flash memory to load the initial code into the Intel Atom E640 series processor. The MinnowBoard uses a WinBond W25Q32 ([[media:winbond-w25q32.pdf|datasheet]]) which has a total of 4096KB of storage which can be flashed with a UEFI image or other custom firmware.<br />
<br />
= Programming Interface =<br />
<br />
the MinnowBoard has a 2x4 header that has 0.1" spacing for programming the SPI based serial flash memory.<br />
<br />
{|border="3"<br />
|+Programming Header<br />
!Pin number||Main Function||Note<br />
|-<br />
| 1<br />
| +3.3V Power<br />
| Supports on +3.3V<br />
|-<br />
| 2<br />
| GND<br />
| system ground<br />
|-<br />
| 3<br />
| nCS<br />
| Chip Select Active Low<br />
|-<br />
| 4<br />
| SCK<br />
| SPI Clock<br />
|-<br />
| 5<br />
| MISO<br />
| Data Output from serial flash<br />
|-<br />
| 6<br />
| MOSI<br />
| Data Input to serial flash<br />
|-<br />
| 7<br />
| nPRG_EN<br />
| Program Enable Active Low<br />
|}<br />
<br />
= Applications and Hardware =<br />
<br />
*[http://flashrom.org/Flashrom Flashrom] is an open source utility that allows you to work with the SPI based serial flash memory on the MinnowBoard. <br />
* Flashrom supports a wide range of flash devices ([http://flashrom.org/Supported_hardware Supported Hardware]) including the WinBond W25Q32.<br />
* Flashrom can automatically detect the presence of the WinBond W25Q32 and provide full read/erase/write functionality. <br />
* Flashrom can use the many open as well as proprietary hardware tools such as<br />
** [[Flyswatter2]] from [http://www.tincantools.com TinCanTools]<br />
** [http://dangerousprototypes.com/docs/Bus_Pirate Bus Pirate] from [http://www.dangerousprototypes.com Dangerous Prototypes]<br />
** [http://www.dediprog.com/SPI-flash-in-circuit-programming/ISP-Evaluation-Kit SF100] from [http://www.dediprog.com DediProg]<br />
** [https://www.kernel.org/doc/Documentation/spi/spidev SPIDev] userspace interface for the Linux Kernel<br />
<br />
<br />
<br />
<br />
[[Category: MinnowBoard]]<br />
[[Category: CircuitCo]]</div>
Prpplague
http://elinux.org/Minnowboard:SPI_Boot_flash
Minnowboard:SPI Boot flash
2013-05-15T21:19:09Z
<p>Prpplague: /* Programming Interface */</p>
<hr />
<div>the [[Minnowboard:MinnowBoard|MinnowBoard]] uses a SPI based serial flash memory to load the initial code into the Intel Atom E640 series processor. The MinnowBoard uses a WinBond W25Q32 ([[media:winbond-w25q32.pdf|datasheet]]) which has a total of 4096KB of storage which can be flashed with a UEFI image or other custom firmware.<br />
<br />
= Programming Interface =<br />
<br />
the MinnowBoard has a 2x4 header that has 0.1" spacing for programming the SPI based serial flash memory.<br />
<br />
{|border="3"<br />
|+Programming Header<br />
!Pin number||Main Function||Note<br />
|-<br />
| 1<br />
| +3.3V Power<br />
| Supports on +3.3V<br />
|-<br />
| 2<br />
| GND<br />
| system ground<br />
|-<br />
| 3<br />
| nCS<br />
| Chip Select Active Low<br />
|-<br />
| 4<br />
| SCK<br />
| SPI Clock<br />
|-<br />
| 5<br />
| MISO<br />
| Data Output from serial flash<br />
|-<br />
| 6<br />
| MOSI<br />
| Data Input to serial flash<br />
| 7<br />
| nPRG_EN<br />
| Program Enable Active Low<br />
|}<br />
<br />
= Applications and Hardware =<br />
<br />
*[http://flashrom.org/Flashrom Flashrom] is an open source utility that allows you to work with the SPI based serial flash memory on the MinnowBoard. <br />
* Flashrom supports a wide range of flash devices ([http://flashrom.org/Supported_hardware Supported Hardware]) including the WinBond W25Q32.<br />
* Flashrom can automatically detect the presence of the WinBond W25Q32 and provide full read/erase/write functionality. <br />
* Flashrom can use the many open as well as proprietary hardware tools such as<br />
** [[Flyswatter2]] from [http://www.tincantools.com TinCanTools]<br />
** [http://dangerousprototypes.com/docs/Bus_Pirate Bus Pirate] from [http://www.dangerousprototypes.com Dangerous Prototypes]<br />
** [http://www.dediprog.com/SPI-flash-in-circuit-programming/ISP-Evaluation-Kit SF100] from [http://www.dediprog.com DediProg]<br />
** [https://www.kernel.org/doc/Documentation/spi/spidev SPIDev] userspace interface for the Linux Kernel<br />
<br />
<br />
<br />
<br />
[[Category: MinnowBoard]]<br />
[[Category: CircuitCo]]</div>
Prpplague
http://elinux.org/Minnowboard:MinnowBoard
Minnowboard:MinnowBoard
2013-05-15T04:02:16Z
<p>Prpplague: /* Resources */</p>
<hr />
<div>[[File:minnow-logo.png]] [[File:minnow-invite.png|200px]]<br />
<br />
= Introduction =<br />
<br />
http://www.minnowboard.org is a community dedicated to the support of Open Hardware utilizing Intel® processors. This web site will serve as a starting point for the MinnowBoard community.<br />
<br />
The MinnowBoard is an Intel® Atom™ processor based board which introduces Intel® Architecture to the small and low cost embedded market for the developer and maker community. It has exceptional performance, flexibility, openness and standards<br />
<br />
<br />
= Accessory Boards =<br />
<br />
Accessory boards for the MinnowBoard are called Lure Boards. There are several types and sizes of these boards available. The specifcations and reference board information is available on the [[MinnowBoard:Lures_Specifications|Lures Specifications]] wiki page.<br />
<br />
= Resources =<br />
<br />
* [http://www.minnowboard.org MinnowBoard Project Page]<br />
* [http://www.intel.com/content/www/us/en/intelligent-systems/queens-bay/embedded-intel-atom-e6xx-series-with-intel-platform-controller-hub-eg20t.html Intel Atom E6xx Pages]<br />
* [http://uefidk.intel.com/content/minnowboard-uefi-firmware MinnowBoard UEFI Open Development Community]<br />
* [[Minnowboard:Minnow_Accessories|MinnowBoard Accessory List]]<br />
* [[Minnowboard:Expansion_Interfaces|MinnowBoard Expansion Interface Descriptions]]<br />
* [[Minnowboard:SPI_Boot_flash|MinnowBoard SPI Serial Flash Memory Programming]]<br />
<br />
[[Category: MinnowBoard]]<br />
[[Category: MinnowBoard Expansion Boards]]<br />
[[Category: CircuitCo]]</div>
Prpplague
http://elinux.org/Minnowboard:MinnowBoard
Minnowboard:MinnowBoard
2013-05-15T04:01:58Z
<p>Prpplague: /* Resources */</p>
<hr />
<div>[[File:minnow-logo.png]] [[File:minnow-invite.png|200px]]<br />
<br />
= Introduction =<br />
<br />
http://www.minnowboard.org is a community dedicated to the support of Open Hardware utilizing Intel® processors. This web site will serve as a starting point for the MinnowBoard community.<br />
<br />
The MinnowBoard is an Intel® Atom™ processor based board which introduces Intel® Architecture to the small and low cost embedded market for the developer and maker community. It has exceptional performance, flexibility, openness and standards<br />
<br />
<br />
= Accessory Boards =<br />
<br />
Accessory boards for the MinnowBoard are called Lure Boards. There are several types and sizes of these boards available. The specifcations and reference board information is available on the [[MinnowBoard:Lures_Specifications|Lures Specifications]] wiki page.<br />
<br />
= Resources =<br />
<br />
* [http://www.minnowboard.org MinnowBoard Project Page]<br />
* [http://www.intel.com/content/www/us/en/intelligent-systems/queens-bay/embedded-intel-atom-e6xx-series-with-intel-platform-controller-hub-eg20t.html Intel Atom E6xx Pages]<br />
* [http://uefidk.intel.com/content/minnowboard-uefi-firmware MinnowBoard UEFI Open Development Community]<br />
* [[Minnowboard:Minnow_Accessories|MinnowBoard Accessory List]]<br />
* [[Minnowboard:Expansion_Interfaces|MinnowBoard Expansion Interface Descriptions]]<br />
* [[Minnowboard:Minnowboard:SPI_Boot_flash|MinnowBoard SPI Serial Flash Memory Programming]]<br />
<br />
[[Category: MinnowBoard]]<br />
[[Category: MinnowBoard Expansion Boards]]<br />
[[Category: CircuitCo]]</div>
Prpplague