ARM Integrator Info - Revision history

Linusw: /* Integrator Compact Platform */

2011-08-30T22:03:58Z

‎Integrator Compact Platform

Linusw: update

2011-08-30T22:02:39Z

update

Glenn: +Category:Categories

2008-02-10T18:30:21Z

+Category:Categories

Wmat: Cleaning Up conversion errors.

2007-03-20T18:32:08Z

Cleaning Up conversion errors.

Wmat: Cleaning Up conversion errors.

2007-03-20T18:30:02Z

Cleaning Up conversion errors.

Wmat: Cleaning Up conversion errors.

2007-03-20T18:28:43Z

Cleaning Up conversion errors.

Wmat: Cleaning up conversion errors.

2007-03-20T18:27:52Z

Cleaning up conversion errors.

Wmat: Cleaning Up conversion errors.

2007-03-20T18:26:58Z

Cleaning Up conversion errors.

RBot: Bot (Edward's framework)

2007-03-06T03:30:49Z

Bot (Edward's framework)

New page

== Integrator Compact Platform ==
The [[Real View]]� Integrator(TM) Compact Platform operates in conjunction with a Core Module to provide a fully integrated development platform. The Core Module FPGA implements a set of ARM [[Prime Cell]] � Peripherals and memory controllers. The [[Prime Cell]] Peripherals make use of the drivers and connectors on the Compact Platform baseboard; these include LCD and touch screen connectors, VGA connector, Multi-Media Card (MMC) interface and an audio codec interface. Ethernet connectivity is provided by a dedicated interface chip. Expansion to Logic Modules and Logic Tiles is through an AMBA AHB-Lite system bus.

The Integrator/CP can be extended to support user created IP, using standard Integrator Logic Tiles, in conjunction with an IM-LT1 Interface, or using Logic Modules.

Integrator/CP is compatible with the following Integrator Core Modules: ARM920T, ARM922T-XA10, ARM926EJ-S, ARM946E-S and ARM966E-S, ARM1026EJ-S and ARM1136J(F)-S. See the following link ([http://www.arm.com/products/DevTools/IntegratorCP.html]) for a more complete description of the board and processors supported.

= Boot Loader =
U-Boot ([http://sourceforge.net/projects/u-boot/]) contains support for this board. To compile U-Boot from CVS sources you can use the following commands:

*make integratorcp_config
*make

The resulting executable can then be loaded on the board using a debugger to be run from the bootMonitor. The following page ([http://www.arm.com/linux/prebuilt_download.html]) contains some information on compiling and running Linux for this board.

@@ Line 1: / Line 1: @@
 == Integrator Compact Platform ==
-The Real View® Integrator(TM) Compact Platform operates in conjunction with a Core Module to provide a fully integrated development platform. The Core Module FPGA implements a set of ARM PrimeCell® Peripherals and memory controllers. The PrimeCell Peripherals make use of the drivers and connectors on the Compact Platform baseboard; these include LCD and touch screen connectors, VGA connector, Multi-Media Card (MMC) interface and an audio codec interface. Ethernet connectivity is provided by a dedicated interface chip. Expansion to Logic Modules and Logic Tiles is through an AMBA AHB-Lite system bus.
+The Real View® Integrator(TM) AP and CP (Compact Platform) operates in conjunction with a Core Module to provide a fully integrated development platform. The Core Module FPGA implements a set of ARM PrimeCell® Peripherals and memory controllers. The PrimeCell Peripherals make use of the drivers and connectors on the Compact Platform baseboard; these include LCD and touch screen connectors, VGA connector, Multi-Media Card (MMC) interface and an audio codec interface. Ethernet connectivity is provided by a dedicated interface chip. Expansion to Logic Modules and Logic Tiles is through an AMBA AHB-Lite system bus.
 * The Integrator/AP is a basic board with two UART ports, timer, RTC and NOR Flash

@@ Line 1: / Line 1: @@
 == Integrator Compact Platform ==
 The Real View® Integrator(TM) Compact Platform operates in conjunction with a Core Module to provide a fully integrated development platform. The Core Module FPGA implements a set of ARM PrimeCell® Peripherals and memory controllers. The PrimeCell Peripherals make use of the drivers and connectors on the Compact Platform baseboard; these include LCD and touch screen connectors, VGA connector, Multi-Media Card (MMC) interface and an audio codec interface. Ethernet connectivity is provided by a dedicated interface chip. Expansion to Logic Modules and Logic Tiles is through an AMBA AHB-Lite system bus.
-The Integrator/CP can be extended to support user created IP, using standard Integrator Logic Tiles, in conjunction with an IM-LT1 Interface, or using Logic Modules.
+* The Integrator/AP is a basic board with two UART ports, timer, RTC and NOR Flash
-Integrator/CP is compatible with the following Integrator Core Modules: ARM920T, ARM922T-XA10, ARM926EJ-S, ARM946E-S and ARM966E-S, ARM1026EJ-S and ARM1136J(F)-S. See the following link [http://www.arm.com/products/DevTools/IntegratorCP.html Integrator Core Modules] for a more complete description of the board and processors supported.
+Integrator/CP is compatible with the following Integrator Core Modules: ARM920T, ARM922T-XA10, ARM926EJ-S, ARM946E-S and ARM966E-S, ARM1026EJ-S and ARM1136J(F)-S. See the following link [http://www.arm.com/products/DevTools/IntegratorCP.html Integrator Core Modules] for a more complete description of the board and processors.
 == Boot Loader ==
@@ Line 13: / Line 17: @@
 </pre>
 The resulting executable can then be loaded on the board using a debugger to be run from the bootMonitor. The following page [http://www.arm.com/linux/prebuilt_download.html Prebuilt downloads] contains some information on compiling and running Linux for this board.
 [[Category:Categories]]

← Older revision		Revision as of 18:30, 10 February 2008
Line 13:		Line 13:
	</pre>		</pre>
	The resulting executable can then be loaded on the board using a debugger to be run from the bootMonitor. The following page [http://www.arm.com/linux/prebuilt_download.html Prebuilt downloads] contains some information on compiling and running Linux for this board.		The resulting executable can then be loaded on the board using a debugger to be run from the bootMonitor. The following page [http://www.arm.com/linux/prebuilt_download.html Prebuilt downloads] contains some information on compiling and running Linux for this board.
		+
		+	[[Category:Categories]]

@@ Line 6: / Line 6: @@
 Integrator/CP is compatible with the following Integrator Core Modules: ARM920T, ARM922T-XA10, ARM926EJ-S, ARM946E-S and ARM966E-S, ARM1026EJ-S and ARM1136J(F)-S. See the following link [http://www.arm.com/products/DevTools/IntegratorCP.html Integrator Core Modules] for a more complete description of the board and processors supported.
-= Boot Loader =
+== Boot Loader ==
-U-Boot ([http://sourceforge.net/projects/u-boot/]) contains support for this board. To compile U-Boot from CVS sources you can use the following commands:
+[http://sourceforge.net/projects/u-boot/ U-boot] contains support for this board. To compile U-Boot from CVS sources you can use the following commands:
+<pre>
 *make integratorcp_config
 *make
+</pre>
-The resulting executable can then be loaded on the board using a debugger to be run from the bootMonitor. The following page ([http://www.arm.com/linux/prebuilt_download.html]) contains some information on compiling and running Linux for this board.
+The resulting executable can then be loaded on the board using a debugger to be run from the bootMonitor. The following page [http://www.arm.com/linux/prebuilt_download.html Prebuilt downloads] contains some information on compiling and running Linux for this board.

@@ Line 4: / Line 4: @@
 The Integrator/CP can be extended to support user created IP, using standard Integrator Logic Tiles, in conjunction with an IM-LT1 Interface, or using Logic Modules.
-Integrator/CP is compatible with the following Integrator Core Modules: ARM920T, ARM922T-XA10, ARM926EJ-S, ARM946E-S and ARM966E-S, ARM1026EJ-S and ARM1136J(F)-S. See the following link [http://www.arm.com/products/DevTools/IntegratorCP.html] for a more complete description of the board and processors supported.
+Integrator/CP is compatible with the following Integrator Core Modules: ARM920T, ARM922T-XA10, ARM926EJ-S, ARM946E-S and ARM966E-S, ARM1026EJ-S and ARM1136J(F)-S. See the following link [http://www.arm.com/products/DevTools/IntegratorCP.html Integrator Core Modules] for a more complete description of the board and processors supported.
 = Boot Loader =