Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "ASEE 2013 Workshop"

From eLinux.org
Jump to: navigation, search
m (Analog In)
m (Warm Up: Moved play to play.txt)
Line 15: Line 15:
 
At this point you need to learn a few simple Linux commands for creating and displaying files. Once you know these commands it's easy to turn an LED on and off.
 
At this point you need to learn a few simple Linux commands for creating and displaying files. Once you know these commands it's easy to turn an LED on and off.
  
First, let's edit a file using the '''nano''' editor.  Nano is a simple editor that easy to learn. This will edit (and create) the file '''play'''.
+
First, let's edit a file using the '''nano''' editor.  Nano is a simple editor that easy to learn. This will edit (and create) the file '''play.txt'''.
  
  bone$ '''nano play'''
+
  bone$ '''nano play.txt'''
  
 
Add a couple of lines of text to the file, it doesn't really matter what and then Exit. You can list the files in the current directory with '''ls''' and show the contents of a file with '''cat'''.
 
Add a couple of lines of text to the file, it doesn't really matter what and then Exit. You can list the files in the current directory with '''ls''' and show the contents of a file with '''cat'''.
 
  bone$ '''ls'''
 
  bone$ '''ls'''
  Desktop  play
+
  Desktop  play.txt
  bone$ '''cat play'''
+
  bone$ '''cat play.txt'''
 
  A couple of lines
 
  A couple of lines
 
  of text.
 
  of text.
Line 32: Line 32:
 
Here's a powerful operator.  You can take the output of any command and redirect it to a file with '''>'''.
 
Here's a powerful operator.  You can take the output of any command and redirect it to a file with '''>'''.
  
  bone$ '''echo This is a line of text > here'''
+
  bone$ '''echo This is a line of text > here.txt'''
  bone$ '''cat here'''
+
  bone$ '''cat here.txt'''
 
  This is a line of text
 
  This is a line of text
  
Line 45: Line 45:
 
  bone$ '''cd'''
 
  bone$ '''cd'''
 
  gone$ '''ls'''
 
  gone$ '''ls'''
  Desktop  here  play
+
  Desktop  here.txt play.txt
  
 
Now you are ready to flash an LED.
 
Now you are ready to flash an LED.

Revision as of 16:14, 14 June 2013

thumb‎ Embedded Linux Class by Mark A. Yoder


Here are the labs for the afternoon Linux part of the ASEE 2013 Workshop

Warm Up

PuTTYconfiguration.jpg

Before we can interact with LEDs and switches we need to learn some simple Linux commands.

  1. On your host computer, running Windows, start up puTTY.
  2. If you get a Security Warning, click Run.
  3. Enter 192.167.7.2 in the Host Name field and click Open
  4. Login as root with no password.
  5. Enter ls to list what files you have. You shouldn't see much.
PuTTYloging.jpg

At this point you need to learn a few simple Linux commands for creating and displaying files. Once you know these commands it's easy to turn an LED on and off.

First, let's edit a file using the nano editor. Nano is a simple editor that easy to learn. This will edit (and create) the file play.txt.

bone$ nano play.txt

Add a couple of lines of text to the file, it doesn't really matter what and then Exit. You can list the files in the current directory with ls and show the contents of a file with cat.

bone$ ls
Desktop  play.txt
bone$ cat play.txt
A couple of lines
of text.

Use echo to print a line of text.

bone$ echo This is a line of text
This is a line of text

Here's a powerful operator. You can take the output of any command and redirect it to a file with >.

bone$ echo This is a line of text > here.txt
bone$ cat here.txt
This is a line of text

We are almost there. Use cd to change directories. / is the top level directory.

bone$ cd /
bone$ ls
bin   dev  home  lost+found  mnt   run   sys  usr
boot  etc  lib   media       proc  sbin  tmp  var

If you ever get lost, cd alone takes you home.

bone$ cd
gone$ ls
Desktop  here.txt  play.txt

Now you are ready to flash an LED.

Blinking an LED

gpio via the Shell Command Line and sysfs

The easiest way to do general purpose I/O (gpio) on the Beagle is through a terminal window and a shell prompt. In Linux, almost everything is treated as a file, even things that aren't files. In our class we'll use a virtual file system called sysfs. sysfs exposes the drivers for the hardware so you get easily use them.

Try this:

bone$ cd /sys
bone$ ls -F
block/  bus/  class/  dev/  devices/  firmware/  fs/  kernel/  module/  power/

Here we see several directories that represent hardware we can control. Explore a bit and see what you find.

Now try:

beagle$ cd /sys/class
beagle$ ls -F
backlight/  firmware/     lcd/       mtd/           scsi_disk/   ubi/
bdi/        gpio/         leds/      net/           scsi_host/   udc/
block/      graphics/     mbox/      power_supply/  sound/       uio/
bluetooth/  hwmon/        mdio_bus/  regulator/     spi_master/  usbmon/
bsg/        i2c-adapter/  mem/       rfkill/        spidev/      vc/
dma/        i2c-dev/      misc/      rtc/           thermal/     vtconsole/
drm/        input/        mmc_host/  scsi_device/   tty/         watchdog/

Explore some.

Blinking a USR LED

The Beagle Black has four user LEDS, user0 - user3, that you can control. Try this:

bone$ cd /sys/class/leds
bone$ ls -F
beaglebone:green:usr0  beaglebone:green:usr2
beaglebone:green:usr1  beaglebone:green:usr3

Here you see the directories for controlling each of the usr LEDs. By default, usr0 flashes a heartbeat pattern and usr1 flashes when the micro SD card is accessed. Let's control usr0.

bone$ cd beagleboard\:\:usr0
bone$ ls -F
brightness  device@  max_brightness  power/  subsystem@  trigger  uevent

See what's in brightness, max_brightness and trigger by using the cat command. For example:

bone$ cat trigger
none nand-disk mmc0 timer oneshot [heartbeat] backlight gpio cpu0 default-on transient

This shows trigger can have many values. The present value is heartbeat. Check the LED, is it beating? You can stop the heartbeat via:

bone$ echo none > trigger
bone$ cat trigger
[none] nand-disk mmc0 timer oneshot heartbeat backlight gpio cpu0 default-on transient 

Did it stop beating? You can now turn it on and off with:

bone$ echo 1 > brightness
bone$ echo 0 > brightness

Is it responding correctly?

The Bone has more trigger options. Try:

bone$ cat trigger
[none] mmc0 timer heartbeat backlight gpio default-on 
bone$ echo timer > trigger
bone$ ls -F
brightness  delay_on  max_brightness  subsystem@  uevent
delay_off   device@   power/          trigger
bone$ echo 100 > delay_on
bone$ echo 900 > delay_off

What does this do?

Blinking an External LED via gpio

In the AM lab we wired an LED to the P9_12 General Purpose IO (gpio) port and controlled it via BoneScript. Here we'll control it via a shell command. First we need to figure out which gpio pin P9_12 is attached to. The following figure shows it attached to gpio_60.

P9PWMs.jpg

Here's how you turn it on

bone$ cd /sys/class/gpio
bone$ ls -F
export  gpiochip0@  gpiochip32@  gpiochip64@  gpiochip96@  unexport

Presently no gpio pins are visible. You need to tell it which pin to export

bone$ echo 60 > export
bone$ ls -F
export  gpio60@  gpiochip0@  gpiochip32@  gpiochip64@  gpiochip96@  unexport

Notice gpio60 has appeared. All we need to do is tell it which direction and then turn it on.

bone$ cd gpio60
bone$ ls
active_low  direction  edge  power  subsystem  uevent  value
bone$ echo out > direction
bone$ echo 1 > value

Your LED should be on! When you are done you can unexport the pin and it will disappear.

bone$ cd ..
bone$ echo 60 > unexport

Reading a switch

Now that you have an LED working, wiring in a switch is easy. In the AM lab you wired a switch to P9_42, which from the table above is gpio_7.

Based on what you saw above.

bone$ cd /sys/class/gpio
bone$ echo 7 > export
bone$ cd gpio7
bone$ ls
bone$ echo in > direction
bone$ cat value
0

Now hold the button down and try again.

bone$ cat value
1

Once you have the switch and LED working use nano and put the following in a file.

bone$ nano button.sh
#!/bin/bash
cd /sys/class/gpio
while [ 1 ]
do
   cat gpio7/value
   sleep 0.25
done

Quit nano and run

bone$ chmod +x button.sh  (This makes button.sh executable)
bone$ ./button.sh

What happens when you push the button?

Now experiment around. Can you flash the LED? How fast? Make the LED read the switch.

Analog In

The bone has eight Analog Inputs. Several are exposed on P9. They are labeled AIN in table 11 below. How many do you find?

P9PWMs.jpg

The AIN pins are sampled at 12 bits and 100k samples per second. The input voltage is between 0 and 1.8V. Fortunately, both voltages are available on P9.

You've already wired these up for the AM lab. You interact with the analog in much like the gpio, but it appears in a different. We have to run a command before the AIN interface appears. Just run them now, later I'll explain what you did if you are interested.

bone$ SLOTS=/sys/devices/bone_capemgr.*/slots
bone$ echo cape-bone-iio > $SLOTS

You can now access the analog interface, let's explore.

bone$ cd /sys/devices/ocp.2/helper.14
bone$ ls -F
AIN0  AIN2  AIN4  AIN6  driver@   power/      uevent
AIN1  AIN3  AIN5  AIN7  modalias  subsystem@

There are the various analog inputs, but watch out. This interface starts numbering at 1 and Table 11 starts at 0, so to read AIN5 you need to look at AIN6!

bone$ cat AIN6
1185

Change the pot and rerun cat. What's the min and max value you get? Is it 12 bits?

You can use the following script to continuously read the input.

while [ 1 ]
  do 
  tr '\n' '\r' < AIN6
done

Pulse Width Modulation

(Note: The pwm interface seems to changing. Some of this may not apply in the future.)

The Bone has a PWM interface at /sys/class/pwm/. You can see what's there by:

bone$ cd /sys/class/pwm
bone$ ls -F
export  unexport

Hmmm, there isn't much there. We have to run a command to make something appear. Try

bone$ SLOTS=/sys/devices/bone_capemgr.*/slots
bone$ echo am33xx_pwm > $SLOTS
bone$ ls -F
export  pwmchip0@  pwmchip2@  pwmchip3@  pwmchip5@  pwmchip7@  unexport

Now we need to run another command to say which pwm pin we want to use. I'm using P9_21.

bone$ echo bone_pwm_P9_21 > $SLOTS

Now you can export a pwm much list you export a gpio port

bone$ echo 1 > export
bone$ cd pwm1
bone$ ls -F
device@  duty_ns  period_ns  polarity  power/  run  subsystem@  uevent

Try a 1Hz frequency with a 25% duty cycle

bone$ echo 1000000000 > period_ns
bone$ echo  250000000 > duty_ns
bone$ echo 1 > run

Connect the LED from and watch it flash. Try changing the frequency and duty cycle. You may have to set the duty cycle to 0 to change the frequency. Can you guess why?

Challenge

Combine the analog in and the PWM by having the pot control the frequency or the duty cycle of the LED.




thumb‎ Embedded Linux Class by Mark A. Yoder