Difference between revisions of "Adafruit: LED Strip LPD8806"
From eLinux.org
m (Richarsm moved page ECE497 richarsm Project to Adafruit LPD8806: Make it so it's more generic.) |
m |
||
| Line 1: | Line 1: | ||
Adafruit LPD8806 | Adafruit LPD8806 | ||
| − | http://adafruit.com/products/306[[File:http://www.adafruit.com/images/large/digitalledstrip_LRG.jpg]] | + | http://adafruit.com/products/306 |
| + | |||
| + | [[File:http://www.adafruit.com/images/large/digitalledstrip_LRG.jpg|200px|thumb|left|alt text]] | ||
This is an LED strip housed in waterproof material with 32 LEDs per meter. The LEDs are controlled by shift registers using LPD8806 controller that controls two LEDs at a time with pulse width modulation. This chip has built in 1.2 MHz high speed 7-bit PWM for each channel which relates to 21-bit color. At each end is a 4-pin JST connector which is sealed in the 5 meter version. This needs to be powered by a 5V power source and should not go above 5.5V. | This is an LED strip housed in waterproof material with 32 LEDs per meter. The LEDs are controlled by shift registers using LPD8806 controller that controls two LEDs at a time with pulse width modulation. This chip has built in 1.2 MHz high speed 7-bit PWM for each channel which relates to 21-bit color. At each end is a 4-pin JST connector which is sealed in the 5 meter version. This needs to be powered by a 5V power source and should not go above 5.5V. | ||
Revision as of 02:44, 5 November 2012
Adafruit LPD8806 http://adafruit.com/products/306
This is an LED strip housed in waterproof material with 32 LEDs per meter. The LEDs are controlled by shift registers using LPD8806 controller that controls two LEDs at a time with pulse width modulation. This chip has built in 1.2 MHz high speed 7-bit PWM for each channel which relates to 21-bit color. At each end is a 4-pin JST connector which is sealed in the 5 meter version. This needs to be powered by a 5V power source and should not go above 5.5V.
