Android Board Support
Porting Android to a new platform can be a challenge. Here are some resources to start with that:
Most ports of Android are to ARM-based platforms.
- Mentor Graphics and Texas Instruments support Android on OMAP processors via the project
- See also Android on OMAP, which has a very thorough listing of issues faced in initially porting Android to OMAP
Mentor Graphics did a port of Android to MIPS.
(Unfortunately, this site requires registration.)
- MIPS now has support for SMP on Android - see MIPS Supports Symmetric Multiprocessing on Android Platform - Posted by Ken Cheung in IP Cores on Tuesday, June 1, 2010
There is a whole well-developed project for Android on x86.
At least one major product (Sony Internet TV) is reported to be x86-based. Intel has a team of developers working on Android issues. See Mark Gross' presentation from ELC 2010 for some tips from them about using Android
- Experiences in Android Porting, Lessons Learned,Tips and Tricks by Mark Gross, April 2010, Embedded Linux Conference 2010
- Intel is working on "native" Android support. See Intel prepping x86 port for Android 2.2 By Eric Brown, lwn.net, 2010-06-28
Individual Platform Support
For Nexus One
Serial port access
There are some serial port pins available on the micro-USB connector, which you can access if you have the right hardware.
See this discussion on xda-developers for detailed information and links.
Brian Swetland says: TTL level (~3.3v?) serial is present on the D+/D- pins of the micro USB connector whenever VBUS (usb +5v power) is not present. This is physical UART1 (ttyMSM0). In standard builds the FIQ kernel debugger runs there. You'll have to disable the FIQ debugger and enable the serial device in your kernel config if you want to use it as a regular serial port.