Android Boot-time Readahead
Here is information about Android Boot-Time Readahead
This is the presentation I gave at ABS 2011.
Bottom line results were an approximate 5% (1.5 seconds) improvement in boot time, using readahead on only a single portion of the boot sequence. A 9% improvement was expected, given the area of the boot sequence that was optimized. So, it didn't help as much as I'd hoped, but did help a little.
More testing is needed:
- to determine why adjusting the I/O scheduling priority did not have the expected affect
- to apply readahead to more part of the boot sequence
- to test other methods to avoid interfering with foreground processing
- like, manually halting and continuing readahead during the boot, and performing smaller reads
These are test programs, but there's nothing in them that prevents them from being used for actual systems. readahead does not intrinsically alter any functionality on the system. It only changes the contents of the page cache. Worst case behavior should be that things boot a bit slower. Best case behavior is that boot time improves a lot. Please measure with bootchart and let me know how it goes.
Mincore is a program I wrote to report the pages in the Linux page cache for requested files.
Here's the source:
Logsync is a program to write a log message to both the kernel log buffer (printk), and the Android log buffer. On most systems, the timestamps are different between these two logging systems. This is useful to determine a unified ordering of events reported by these separate systems.
Tim's readahead - This is a test program to experiment with various readahead options. Besides actually performing readahead operations, it includes facilities for recording iowait before and after a readahead sequence, timing the duration of readahead operations, and changing things like the process scheduling priority, I/O scheduler, and I/O scheduling priority.
You can build this in context of the Android build system (using the included Android.mk) or using a regular Linux host compiler (using the included Makefile). Note that this would build for a 32-bit x86 system (which is what the Sony Internet TV is).
The source includes readahead.S, which is assembly for adding a wrapper for the readahead syscall on ARM systems. Bionic on ARM is missing the wrapper for the readahead syscall.
How to use Treadahead
mincore is used to gather information about the blocks of a file that are in memory. You hand it a file list, and it outputs a list of blocks. Use the -r options to specify that the output should be in treadahead format.
treadahead is used to read files and parts of files into memory. You can specify the areas to read on the command line or in the file /readahead_list.txt
Each line in the readahead_list.txt file specifies a file to read, with syntax:
area_list is: <offset>:<len>[,<offset>:<len>]
If the area_list is empty, then the whole file is read ahead.
Here is an example:
/system/framework/framework-res.apk /system/app/Contacts.apk 0:4096,1282048:4096,1294336:4096,1470464:12288
This would read everything in framework-res.apk, and only certain portions of Contacts.apk
To build the needed data file, you need to follow these steps:
- build a list of files to scan
- use mincore with the list of files, to build a list of blocks to readahead
- use treadahead in /init.rc to readahead the blocks
For testing, you may wish to remove blocks from the kernel page cache. You can do this with:
$ echo 1 >/proc/sys/vm/drop_caches
You can echo either '1', '2', or '3' to drop_caches. '1' drops pagecache, '2' drops dentries and inodes, and '3' drops both)
In sreadahead, the list of files is determined by examining trace data for file opens during the boot. For my early testing of treadahead, I used files that I found were consuming a lot of load time, from instrumenting the zygote process during its class preloading time (and also the package scanning during the application manager initialization)
Actual Usage =
To build a list of files (for /readahead_files.txt), boot the system, then soon after system start do:
# find . -name "*.apk" | xargs mincore
Put the names of files with significant blocks in cache, into
To create the block list reboot again and do:
# cat /readahead_files.txt | xargs mincore -r >/readahead_list.txt
To start the system with readahead turned on, add these lines to /init.rc
service treadahead /system/bin/treadahead -f oneshot
Testing boot speed on Android
To see the boot speed (and impact of readahead), read the 'events' log and the 'main' log.
Grab the event log with:
$ adb logcat -b events -d >eventlog1.txt
Grab the main log with:
$ logcat -d >mainlog1.txt
Find the class preload timestamps with:
$ grep boot eventlog1.txt
Find the total start time with:
$ grep enable_screen eventlog1.txt
Find the class preload durations with:
$ grep preloaded mainlog1.txt
Find the time to scan packages with:
$ grep Time mainlog1.txt
You can compare results from different runs by grepping with shell wildcards:
$ grep enable_screen *
$ grep Time *
See the presentation: Media: Android-bootup-time-celf-jamboree34.ppt
This has results for using 'cat <foo> >/dev/null' in init.rc, which improved boot time on the EVM board, which used an NFS root filesystem.