Android Kernel Installation

Revision as of 14:44, 4 September 2009 by Tim Bird (Talk | contribs) (create page)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

How to use a new kernel with the emulator or on a product.

In general, this will be very product-specific.

With the G1/ADP1

On the ADP1, you can boot using a specific kernel using fastboot, which will send it to the board as part of the bootup sequence. Specify the kernel as one of the parameters to the 'fastboot boot' option. See for details.

Also, you can install the kernel into a recovery image, and install the recovery image using the system recovery procedure.

You can create a "boot" image directly, and install that to the boot or recovery flash partition manually. This can be done either using a running kernel or using fastboot.

With the emulator

There are some interesting notes at:

On a board using an SDCARD

For an OMAP EVM, using the Android image available from Mistral, place a new uImage on the SDCARD at the root the vfat partition. The bootloader will run the commands in the