Android Kernel Installation
How to use a new kernel with the emulator or on a product.
In general, this will be very product-specific.
With the G1/ADP1
On the ADP1, you can boot using a specific kernel using fastboot, which will send it to the board as part of the bootup sequence. Specify the kernel as one of the parameters to the 'fastboot boot' option. See http://www.gotontheinter.net/content/fastboot-cheat-sheet for details.
Also, you can install the kernel into a recovery image, and install the recovery image using the system recovery procedure.
You can create a "boot" image directly, and install that to the boot or recovery flash partition manually. This can be done either using a running kernel or using fastboot.
With the emulator
You can specify the kernel to use with the emulator using the '-kernel' command line option.
There are some interesting notes about using the emulator without specifying a AVD file at: http://groups.google.com/group/android-platform/browse_thread/thread/591290fde1e9865a
On a board using an SDCARD
For an OMAP EVM, using the Android image available from Mistral, place a new uImage on the SDCARD at the root the vfat partition. The bootloader will run the commands in the
Back to Android portal