Difference between revisions of "Android Tutorials Unbox to App"

From eLinux.org
Jump to: navigation, search
Line 53: Line 53:
 
|-
 
|-
 
|[[File:Android com.png|400px]]
 
|[[File:Android com.png|400px]]
 +
|Go to android.com and click on Developers.
 +
|-
 +
|[[File:Download the sdk.png|400px]]
 
|Go to android.com and click on Developers.
 
|Go to android.com and click on Developers.
 
|-
 
|-

Revision as of 08:42, 28 October 2011

All Panda Hardware.jpg
 * HDMI 1080p monitor
 * USB keyboard and mouse
 * 5V, 2A Power Supply
 * HDMI Cable
 * Monitor Power Supply
Panda Board Power Supply.jpg A close up of the power supply.
Panda Cables Connected.jpg Unpack the Panda Board and connect the HDMI cable and the USB keyboard and mouse.
Panda Serial to USB.jpg Optionally connect a serial-to-USB converter.
Panda SD Card Reader Writer.jpg Connect an SD card reader
Panda Insert SD Card.jpg Insert your SD card.
Android-build.png Download a release from android-build.linaro.org.
Android-build-staging-10.png The build page contains all the information necessary to program the build on an SD card. The following commands can be used to get and program a build.
 wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/4/artifact/build/out/target/product/pandaboard/boot.tar.bz2
 wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/4/artifact/build/out/target/product/pandaboard/system.tar.bz2
 wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_staging-panda-11.10-release/4/artifact/build/out/target/product/pandaboard/userdata.tar.bz2
 bzr branch lp:linaro-image-tools
 ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev panda --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2

A serial console thats logged to a file can be started to record boot:

 minicom -D /dev/ttyUSB0 -w -C minicom.txt
Android-build-staging-bottom.png At the bottom of the build page is the build artifacts referenced in the instructions listed above.
Panda Full Set Up.jpg Everything running.
Panda ADB Cable.jpg Panda uses a Mini-B plug for ADB
ADB USB Board Connection.jpg Connect the Mini-B plug.
Android com.png Go to android.com and click on Developers.
Download the sdk.png Go to android.com and click on Developers.
Android Ubuntu Linux Notes.png Check out the http://developer.android.com/sdk/installing.html for steps to install the SDK.
Install android tools.png Install android's SDK
Disable suspend.png Open Disable Suspend.