Armadeus APF boards - Revision history

Jsujjava: Add category

2011-05-05T14:21:54Z

Add category

Wmat: fixed missing image

2011-01-28T03:40:15Z

fixed missing image

Wmat: /* APF27 (i.MX27 based) */

2011-01-28T03:38:52Z

‎APF27 (i.MX27 based)

JulienBoibessot: page creation

2010-04-21T13:33:40Z

page creation

New page

APF boards are Systems On Module designed for embedding into project needing performances, low power and versatility.
Initiated by a group of embedded systems enthusiasts as a proof of concept (ARM+FPGA combination), boards are now designed, sold and supported by the [http://www.armadeus.com ARMadeus Systems company].

Open Source Buildroot's based BSP is maintained by ARMadeus Systems itself and boards are used by the growing [http://www.armadeus.org Armadeus Project Community].

FPGA's IP designed for the boards support OpenCores Wishbone bus.

== APF27 (i.MX27 based) ==

{|
| [[Image:apf27.jpg|scale|120px]] ||

:The APF27 is a reduced size processor board fitted with a 400MHz i.MX27 processor, 64 MB to 256 MB DDR mobile RAM (32 bits), 256 MB to 512 MB FLASH (NAND 16 bits), a 10/100Mbits Ethernet port and a Xilinx (200K gate) '''Spartan 3A FPGA''', it is easily integrated into an embedded system thanks notably to its regulators and level converters (RS232/USB).
:[http://www.armadeus.com/english/products-processor_boards-apf27.html Click here for official APF27 site]

||
|}

== APF9328 (i.MXL based) ==

{|
| [[Image:apf9328.jpg|scale|120px]] ||

:The APF9328 is a reduced size processor board fitted with a 200MHz i.MXL processor, 8 to 32MB SDRAM, 8 to 16MB FLASH (NOR), a 10/100Mbits Ethernet port and a Xilinx (200K gate) Spartan 3 FPGA. It is easily integrable into an embedded system thanks notably to its regulators and level converters (RS232/USB).
:[http://www.armadeus.com/english/products-processor_boards-apf9328.html Click here for official APF9328 site]

||
|}

← Older revision		Revision as of 14:21, 5 May 2011
Line 27:		Line 27:
	\|\|		\|\|
	\|}		\|}
		+	[[Category:ARM Development Boards]]

@@ Line 20: / Line 20: @@
 {|
-| [[Image:apf9328.jpg|scale|120px]]   ||
+| [[Image:APF9328.gif|scale|120px]]   ||
 :The APF9328 is a reduced size processor board fitted with a 200MHz i.MXL processor, 8 to 32MB SDRAM, 8 to 16MB FLASH (NOR), a 10/100Mbits Ethernet port and a Xilinx (200K gate) Spartan 3 FPGA. It is easily integrable into an embedded system thanks notably to its regulators and level converters (RS232/USB).

@@ Line 9: / Line 9: @@
 {|
-| [[Image:apf27.jpg|scale|120px]]   ||
+| [[Image:apf27.gif|scale|120px]]   ||
 :The APF27 is a reduced size processor board fitted with a 400MHz i.MX27 processor, 64 MB to 256 MB DDR mobile RAM (32 bits), 256 MB to 512 MB FLASH (NAND 16 bits), a 10/100Mbits Ethernet port and a Xilinx (200K gate) '''Spartan 3A FPGA''', it is easily integrated into an embedded system thanks notably to its regulators and level converters (RS232/USB).