Automatic Door Lock System

From eLinux.org
Revision as of 10:44, 26 November 2015 by Anand K. Parmar (talk | contribs) (dfh)
Jump to: navigation, search

Team members:

  1. Anand K. Parmar
  2. Mani K. Srivastava
  3. M.R.Srinath
  4. Shiva Verma


Grading Template

I'm using the following template to grade. Each slot is 10 points. 0 = Missing, 5=OK, 10=Wow!

00 Executive Summary
00 Installation Instructions 
00 User Instructions
00 Highlights
00 Theory of Operation
00 Work Breakdown
00 Future Work
00 Conclusions
00 Demo
00 Not Late
Comments: I'm looking forward to seeing this.

Score:  00/100

(Inline Comment)

[page]

Executive Summary

The goal of this project is to build a Door Lock System such that the knock pattern acts as a key to it i.e. The system will get activated and door will be opened only until a specific pattern is detected by the system. The knock pattern is alterable, means user can set it according to their wish.


Hardware

Electrical Components

They are many components used in our project but the key role was of servo motor (HK15178).

The other main component was the piezo sensor which is used as the knock detector in our project.

Rest of the components which we have also used

  • PCB Board
  • Wires
  • Arduino
  • 2 Led's (green & Red)
  • Momentary Push Button
  • Permanent Push Button
  • 4 resistors

Hardware Components

we have used only some of the hardware components like

  • Cardboard's
  • Polystyrene
  • Double sided tape


Electrical Hardware

A BeagleBone is the bread and butter of the project, driving the entire effort but suddenly due to some issues and overload on beagle we have shifted to Arduino.

To drive all the electrical components correctly we have used the following board

Installation Instructions

User Instructions

  1. Press the Permanent Push Button and give knock sequence to piezo-electric sensor for setting a new secret knock pattern.
  2. Now, provide the knock sequence with permanent push button's state turned off. If pattern matches, the door will be unlocked, otherwise it wont.
  3. For locking the door while being inside, press the momentary push-button.


Note: The system can detect 21 knocks at max with maximum time difference between two consecutive knocks to be 1.2 seconds.

Highlights

  1. Initially, the work was done on both Arduino and Beaglebone, but due to some technical issues, the final system uses Arduino only.
  2. The system can also be integrated with an Android Application, which will command the system for either locking or unlocking.

Theory of Operation

Work Breakdown

  1. The circuit part was handled by Anand K. Parmar and Shiva Verma.
  2. The algorithm was designed by Mani Kumar and Anand K. Parmar.
  3. Merging together and designing work was handled by M.R. Srinath and Shiva Verma.

Future Work

Conclusions

  • We'd like to thank Professor Dr Mark A. Yoder for providing us with this course were we have put in our efforts in making this project with all the required assignments and also the assessments of Dr Anil Kumar in bringing this course.
  • We have learned the limits of the onboard I2C interface, making control of all 32 channels impractical. In addition to this we have also learned the specification of some sensors and some hands on work in JavaScript and also how proper collaboration of components is done.
  • Overall the course content was good and also helped us in learning some good stuff and had nice time with an experienced person.


thumb‎ Embedded Linux Class by Mark A. Yoder