BURN3 - Revision history

Jsujjava: Add to Category Hardware Hacking

2011-05-05T19:40:41Z

Add to Category Hardware Hacking

Wmat: More tidying up of ugly links.

2009-12-03T04:52:34Z

Wmat: /* Installing Burn3 from Linux via serial connection */

2009-12-03T04:52:07Z

‎Installing Burn3 from Linux via serial connection

Wmat: More tidying up of ugly links.

2009-12-03T04:51:38Z

Wmat: Fixed a broken link while fixing Wanted Pages.

2009-12-03T04:50:50Z

Fixed a broken link while fixing Wanted Pages.

Wmat: Fixed a missing file and cleaned up links.

2009-12-03T04:30:05Z

Fixed a missing file and cleaned up links.

FransMeulenbroeks: removed ref to nonexisting page

2008-11-17T20:49:40Z

removed ref to nonexisting page

Prpplague at 21:01, 24 September 2007

2007-09-24T21:01:05Z

Prpplague at 21:00, 24 September 2007

2007-09-24T21:00:24Z

RBot: Bot (Edward's framework)

2007-03-07T03:30:58Z

Bot (Edward's framework)

New page

BURN3 is a firmware for the [[ZipIt]] that contains a basic Linux distribution that is mainly useful for loading other, more feature-rich firmwares (such as [[OpenZipIt]]) onto the [[ZipIt]].

BURN3 is pretty much exactly what was on the zipit when you got it, but instead of going to the messenger app by default it goes to a Linux console terminal instead. Login as root, and once you're in, type in zrun then hit enter and it's the same as an unmodded zipit. As far as what can it do, its an embedded linux box (w/ 802.11) but honestly, not too much more. If you then install [[OpenZipIt]] or "Adam's Alternate ROM load" then you'll have a small wireless ssh client (see [[ZipIt Software]] for more info).

== Installing BURN3 from Windows using serial connection ==
(requires serial port hardware mod see: [[Zipit Hardware Mods]])

''detailed instructions to be written here''

Download the following file and unzip it to a directory on your Windows PC:
[[Media:zipit_reflash_kit03.zip]]
you should also get: [[Media:zipit_tool_extras.zip]]

Original sources:

http://www.aibohack.com/zipit/zipit_reflash_kit03.zip
http://www.aibohack.com/zipit/zipit_tool_extras.zip
== Installing BURN3 from Windows via [[WiFi]] ==
'''Only works if your Zipit has firmware earlier than Ver 2.01'''

Download the following file and unzip it to a directory on your Windows PC:
[[Media:zipit_reflash_kit03.zip]]

In order to install [[BURN3]] using Windows XP, one first has to configure Windows to be an ad-hoc networking node. For instructions on this, please see: [[ZipItWinXPsetup]] Alternatively you may connect via an access point that is disconnected from the Internet and has WEP disabled.

Once this is done, follow the [http://aibohack.com/zipit/reflash.htm original instructions] from the heading "Instructions (Windows PC)"

== Installing Burn3 from Linux via serial connection ==
(requires serial port hardware mod see: [[Zipit Hardware Mods]])

Download the following file and unzip it to a directory on your Linux box: [[Media:zipit_reflash_kit03.zip]]

My linux port of the upl utility should work with the 3-wire mod. It can be found at:

http://stoa.dhs.org/~cvs/zipit/
(look for zipit-flash)

Although I have the 5-wire mod myself, I never did get this linux port correctly reading data from the zipit. I use it regularly to flash my zipit. Here's a little transcript:

<pre>
$ ./upl /dev/ttyS1 zpm.bin
Connected
Turn on the Zipit (press button, wait for green, release)
Wait 10 seconds, then press ENTER to start transfer
(DBG pin must be grounded)

Transfering bootstrap program
Transfer complete
Switch to 57.6kbps
Echo + upload commands
Decide what to upload
'A' - allrom.bin upload (2MB)
'a' - loader.bin upload (8K max)
'k' - zimage.dat upload (581K max)
'u' - ramdisk.gz upload (1.5MB max)
Follow changes with 'WYes' to write
A <-- press ENTER
//Uploading 2097152 bytes from allrom.bin
// done upload: csum=ffffffff (363s)
WYes <-- press ENTER
^C
$
</pre>

After entering [[WYes]], go for a coffee or something. I'm not sure how long the flashing takes, but I've interrupted it too early a few times and had to do it again. Someone said they figured the orange LED turns on solid during flashing. I've been reading the zpm source code and I can't see where it does that and I've never observed that behaviour.

Chris.

== Installing BURN3 from Linux over [[WiFi]] ==
'''Only works if your Zipit has firmware earlier than Ver 2.01'''

Download the following file and unzip it to a directory on your Linux box: [[Media:zipit_reflash_kit03.zip]]

In order to install [[BURN3]] using Linux, one first has to configure Linux to be an ad-hoc networking node.
For instructions on this, please see: [[Zipit Linux Setup]]

Once this is done, follow the [http://aibohack.com/zipit/reflash.htm original instructions] from the heading "Instructions (Windows PC)" all the way down to the bullet that states "Before you press the "NEXT" button, start the ZRS server".
Those instructions deal exclusively with the [[ZipIt]] device, and are independant of your PC's operating system.

In order to use the ''zrs'' utility in Linux, we will make use of WINE. If you're using Ubuntu or another Debian based distribution, you can install WINE by typing:

<pre>
sudo apt-get install wine
</pre>

Packages for most other popular distributions are available at [http://www.winehq.org the official WINE website].

Now, open up a terminal and a create a new directory to store some stuff. Download and extract BURN3 and ''zrs'' by typing:

<pre>
wget http://aibohack.com/zipit/zipit_reflash_kit03.zip
unzip zipit_reflash_kit03.zip
</pre>

Now we can fire up zrs with:

<pre>
wine zrs burn3 10.0.1.9
</pre>

Push "Next" on your [[ZipIt]], and it should now connect to the wireless network, and detect that "An update for the Zipit Wireless Messenger is available."
Pressing "Next" again will report:
** Retrieving Update...
** Verifying Update...
** Installing Update...
This will take several minutes, and the device will reboot when it is finished.

On your PC, push Ctrl-C to stop the ZRS program, as it is no longer needed.

Finally, put your network settings back by going back to Networking, deactivate "Wireless connection", set the default gateway device back to eth0. If you find that your internet/ethernet connection isn't working right away, a reboot should fix the problem.

== Now what? ==

Now that BURN3 is installed on your [[ZipIt]], you can find out more about what you can do with it [http://aibohack.com/zipit/reflash.htm here], under the "Try it out" heading. At this time you may also want to setup an NFS server using [http://elinux.org/wiki/ZipIt/WinxpNFS windows] or [http://elinux.org/wiki/OpenZipItLinuxInstall linux]
=== Try it out ===
The device should reboot showing the Hacked by [[Zipit Pet]] and eventually the penguin logo.
* login as "root", no password

* As you know already: when running the Zipit IM app, the shift keys are a prefix (press shift key first, let go, then press the other key) The Linux keyboard driver acts differently. Hold down the SHIFT (up arrow), Alt or Ctrl shift keys and press the other key at the same time (ie. like a normal keyboard). The P1, P2, P3 keys are mapped to F1, F2, F3
* Alt+P1/P2/P3 will switch virtual consoles.

* To run the regular Zipit IM app, type the command "zrun" at the command prompt. NOTE: the regular 'Zipit' program run, it will attempt to connect to the real Internet and download the latest firmware. When an update to the official version is released (currently 2.01), reflashing will replace the hacked firmware with something new. Stop it before it gets that far if you want to keep your hacked version. (Note that if you allow it to upgrade to version 2.01, you won't be able to use ZRS to put back a hacked firmware.)

* When done, be sure to turn off the device (press and hold power switch). If you leave it on and un pluged the battery will run down (ie. there is no auto power off timer when running regular Linux unless you add the zipit tools with these options)

* The file system on the Zipit device is temporary, extracted from the Flash ROM contents at boot. If you copy over files, they will be lost when the power is turned off.

* If using a DHCP server, the command "udhcpc" will connect to an open access point (without a WEP) and assign an IP address using DHCP You can then 'telnet' to the Zipit device from your PC.

* If you have a WL-HDD device configured as recommended (see below), the "n1" command will assign a static IP, and connect to the nfs server.

Also, now you can install [[OpenZipIt]], and do even cooler things with your [[ZipIt]].

← Older revision		Revision as of 19:40, 5 May 2011
Line 137:		Line 137:

	Also, now you can install [[OpenZipIt]], and do even cooler things with your [[ZipIt]].		Also, now you can install [[OpenZipIt]], and do even cooler things with your [[ZipIt]].
		+	[[Category:Hardware Hacking]]

← Older revision		Revision as of 20:49, 17 November 2008
Line 66:		Line 66:


−	After entering [[WYes]], go for a coffee or something. I'm not sure how long the flashing takes, but I've interrupted it too early a few times and had to do it again. Someone said they figured the orange LED turns on solid during flashing. I've been reading the zpm source code and I can't see where it does that and I've never observed that behaviour.	+	After entering WYes, go for a coffee or something. I'm not sure how long the flashing takes, but I've interrupted it too early a few times and had to do it again. Someone said they figured the orange LED turns on solid during flashing. I've been reading the zpm source code and I can't see where it does that and I've never observed that behaviour.

	Chris.		Chris.

@@ Line 23: / Line 23: @@
 [[Media:zipit_reflash_kit03.zip]]
-In order to install [[BURN3]] using Windows XP, one first has to configure Windows to be an ad-hoc networking node. For instructions on this, please see: [[ZipIt WinXP setup]] Alternatively you may connect via an access point that is disconnected from the Internet and has WEP disabled.
+In order to install [[BURN3]] using Windows XP, one first has to configure Windows to be an ad-hoc networking node. For instructions on this, please see: [[ZipIt WinXP Setup]] Alternatively you may connect via an access point that is disconnected from the Internet and has WEP disabled.
 Once this is done, follow the [http://aibohack.com/zipit/reflash.htm original instructions] from the heading "Instructions (Windows PC)"

@@ Line 22: / Line 22: @@
 Download the following file and unzip it to a directory on your Windows PC:
-[[Media:zipit_reflash_kit03.zip]]
+[[Media:zipit_reflash_kit03.zip | zipit_reflash_kit03.zip]]
 In order to install [[BURN3]] using Windows XP, one first has to configure Windows to be an ad-hoc networking node. For instructions on this, please see: [[ZipIt WinXP Setup]] Alternatively you may connect via an access point that is disconnected from the Internet and has WEP disabled.
 Once this is done, follow the [http://aibohack.com/zipit/reflash.htm original instructions] from the heading "Instructions (Windows PC)"
 == Installing Burn3 from Linux via serial connection ==

@@ Line 31: / Line 31: @@
 (requires serial port hardware mod see: [[Zipit Hardware Mods]])
-Download the following file and unzip it to a directory on your Linux box: [[Media:zipit_reflash_kit03.zip]]
+Download the following file and unzip it to a directory on your Linux box: [[Media:zipit_reflash_kit03.zip | zipit_reflash_kit03.zip]]
 My linux port of the upl utility should work with the 3-wire mod.  It can be found at:
@@ Line 70: / Line 70: @@
 Chris.
 == Installing BURN3 from Linux over [[WiFi]] ==

@@ Line 75: / Line 75: @@
 '''Only works if your Zipit has firmware earlier than Ver 2.01'''
-Download the following file and unzip it to a directory on your Linux box: [[Media:zipit_reflash_kit03.zip]]
+Download the following file and unzip it to a directory on your Linux box: [[Media:zipit_reflash_kit03.zip | zipit_reflash_kit03.zip]]
 In order to install [[BURN3]] using Linux, one first has to configure Linux to be an ad-hoc networking node.

@@ Line 121: / Line 121: @@
 Now that BURN3 is installed on your [[ZipIt]], you can find out more about what you can do with it [http://aibohack.com/zipit/reflash.htm here], under the "Try it out" heading. At this time you may also want to setup an NFS server using [http://elinux.org/wiki/ZipIt/WinxpNFS windows] or [http://elinux.org/wiki/OpenZipItLinuxInstall linux]
 === Try it out ===
-The device should reboot showing the Hacked by [[Zipit Pet]] and eventually the penguin logo.
+The device should reboot showing the Hacked by Zipit Pet and eventually the penguin logo.
 * login as "root", no password

@@ Line 10: / Line 10: @@
 Download the following file and unzip it to a directory on your Windows PC:
-[[Media:zipit_reflash_kit03.zip]]
+[[Media:zipit_reflash_kit03.zip | zipit_reflash_kit03.zip]]
-you should also get: [[Media:zipit_tool_extras.zip]]
+you should also get: [[Media:zipit_tool_extras.zip | zipit_tool_extras.zip]]
 Original sources:
-http://www.aibohack.com/zipit/zipit_reflash_kit03.zip
+[http://www.aibohack.com/zipit/zipit_reflash_kit03.zip www.aibohack.com/zipit/zipit_reflash_kit03.zip]
-http://www.aibohack.com/zipit/zipit_tool_extras.zip
+[http://www.aibohack.com/zipit/zipit_tool_extras.zip www.aibohack.com/zipit/zipit_tool_extras.zip]
 == Installing BURN3 from Windows via [[WiFi]] ==
 '''Only works if your Zipit has firmware earlier than Ver 2.01'''