- 1 Project: XBMC
- 2 Documentation
- 3 Abstract
- 4 Optimizing skins for Beagle Board
- 5 Dirty region rendering
- 6 OMAP Overlay
- 7 Finite
Student: Tobias Arrskog
Mentors: Mike Zucchi, Mans Rullgard, Søren Steen Christensen
Repository-git: git://xbmc.git.sourceforge.net/gitroot/xbmc/xbmc and branch gsoc-2010-beagleboard
Latest blog entries:
Koen have been nice enough to add a dependency list to narcissus but for those that doesn't want to make a new image here is the package list
opkg install task-native-sdk boost-dev libgles-omap3-dev libsamplerate0-dev liblzo2-dev bzip2-dev libwavpack-dev mpeg2dec-dev libfribidi-dev libpcre-dev libcdio-dev libmodplug-dev flac-dev libsdl-mixer-1.2-dev libsdl-image-1.2-dev alsa-dev enca-dev libxt-dev libxtst-dev libxmu-dev libxinerama-dev curl-dev libmicrohttpd-dev gperf cmake zip git python-devel openssl-dev cvs pkgconfig-dev libxrender-dev libxrandr-dev git glibc-gconv-ibm850 glibc-charmap-ibm850 angstrom-version
Interesting patches for beagleboard
To enable the experimental omap overlay video renderer use configure option --enable-omap-overlay
To enable dirty region based rendering add this as advancedsettings.xml (~/.xbmc/userdata/advancedsettings.xml)
Note that algorithm 0 is just redraw everything always, 1 is unified region, 2 is cost reduction.
Build Instructions (native)
Since XBMC is a big application it takes up the entire ram of the beagleboard on link, this means that we need swap (here is how this can be done http://www.redhat.com/docs/manuals/linux/RHL-8.0-Manual/custom-guide/s1-swap-adding.html)
export CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O2"
export LDFLAGS="-Wl,-O1 -Wl,--hash-style=gnu"
./configure --enable-gles --enable-omap-overlay --prefix=/usr --sysconfdir=/etc --cache=config.cache --disable-optical-drive
Sit back and enjoy, the build process will take a few hours.
Build Instructions (cross compile)
First begin by setting up OpenEmbedded by following this tutorial http://www.angstrom-distribution.org/building-angstrom
While its ok to build xbmc directly now it will take a lot of diskspace so first build dependencies .
MACHINE=beagleboard bitbake libxmu fribidi mpeg2dec ffmpeg samba fontconfig curl libmodplug libmicrohttpd wavpack libmms cmake-native
MACHINE=beagleboard bitbake libsdl-image libsdl-mixer mysql5 sqlite3 libmms faad2 libcdio libpcre boost lzo2 enca avahi libsamplerate0 libxrandr bzip2 virtual/libsdl
Get ahold of the SDK for SGX and put it into downloads and run
MACHINE=beagleboard bitbake virtual/egl
Koen have already provided a bitbake recipe for trunk but if you wish to follow progress on my branch these are the steps you need to take.
If you wish to follow using git just open the xbmc_svn.bb and switch branch to gsoc-2010-beagleboard. The gsoc branch have all the required patches for crosscompilation so no need for patches. Set SRC_URI to:
Then all thats needed is to follow my branch is to change SRCREV to be the hash sum of the revision you wish to base from, this is kindof annoying to change all the time so I use a local git which I update instead. Here I have cloned git repository from xbmc to /home/topfs/xbmc/ and using the following recipe http://pastebin.com/cF33fPhg
Now its possible to build xbmc using:
MACHINE=beagleboard bitbake xbmc
Google summer of code 2010 – Rendering optimizations of XBMC for the Beagle Board
Optimizing skins for Beagle Board
There are a number of ways to optimize skins, some of which are general and some are specifically target for embedded and GLES both will be covered in the following section.
On desktop its very rare that the GPU is limiting when rendering XBMC but lower resources could mean less heat generation and slower fanspeeds but also less power requirements which could mean longer battery life or cheaper electric bill. With that said some slower built in graphic cards could still use the performance boost in the higher resolutions. Generally speaking more controls being rendered equals more performance needed thus it makes sense to limit redundant controls if possible. A fluid skin is not just something which runs at a fast framerate when loaded but also a skin which loads each window quickly. Its worth considering that a harddrive might not be as fast on the HTPC as it is on the workstaion and by far the thing which takes longest to load are images. While it is possible to background load images to get a fast initial load of a window its not very nice if it takes tens of seconds to get it fully finalized. Scaling and positioning textures in accelerated rendering systems is usually almost for free which means using the border tag in skinning to limit the size of a texture could significantly lower the needed load.
Embedded and Beagle Board specific
Up to and including C4 version of Beagle Board the GPU is the harsh bottleneck and to optimize rendering its worth understanding what takes most resources.
On embedded platforms bandwith is usually very limited, this is true both in uploading data to RAM/GPU and the bandwith used to manipulate the backbuffer. To create a fluid skin on an embedded plattform its thus vital to limit the needed textures to present the skin, this will limit loading time but also rendering. As a suggestion its very wise to use GIMP or Photoshop to create the mockups since using layers is very useful in the development stage but when the skin is meant to be used on an embedded plattform unnecessary layers can take quite a lot of resources to render. This holds true especially when multiple layers are used to form one static image, its alot faster to use GIMP or Photoshop to merge down the layers and only use the one in XBMC. Every layer that could be removed will help alot hence it is worth considering skipping dynamic backgrounds for embedded usage and merge together overlays and backgrounds to a single layer for the skin.
On the beagle board showing a few buttons will yield about 60fps in 720p but also having one non-blended background will make the speed 20fps, and this is only with one merged background! Since the SGX graphics core is designed to be used mostly in low resolution situations the textures used are generally small. If a texture is to big the SGX core might not be able to use the texture cache properly, this means that using textures above 512x512 is significantly slower, regardless of the rendering area. So skinners need to think long and hard before using larger textures and if a large texture is required splitting it into pieces with multiple controls can be alot faster. Also usually using power of two textures are faster so as an example using a 1280x720 texture rendered over the same area as four 512x256 textures will be 20fps against 30fps, the resulting picture is the same to the user but with 50% performance increase!.
Using textures with alpha are a very common practice to create nice looking skins, its worth knowing that rendering with blending enable will use more than twice the amount of bandwith since it needs to read the backbuffer, blend and then write it back. Without blend it only needs to write. Note that the needed bandwith is on a per pixel basis so avoiding alpha on big images is key, for example backgrounds. XBMC isn't extremely smart at understanding if the image has alpha or not so for non-alpha images use JPG as its guaranteed to work.
Dirty region rendering
Most of my time during this google summer of code was spent on making the rendering system in XBMC being able to only render what had changed. This is a very common tecniuqe when there is little available bandwith and the interface rarely changes over big areas. In theory a dirty region based rendering should allow quite a big performance increase if the interface is close to static. In XBMC this is generally true but given its meant for TV usage and viewed from a distance its quite normal that rather large parts are changing when something happens. Thus the hard limit for performance increase is up to the skinner if he or she can design a skin which only changes in small areas at one time, this could be accomplised if animations are few or small.
How does it work?
When you use XBMC every view or intendt you see is called a window. A skin has the ability to form a window how they see fit. A window is made up of controls or groups of controls. A control could be an inanimate object such as a background image or something you interact with, for example a button. This means the skinner have full control what and how everything is displayed in every window. Under the hood XBMC will process each control and if something changes it will mark said controls covering area as dirty. When every control have had the opportunity to mark, XBMC will try to optimize how it should render the possibly overlapping dirty regions. Note that since opengl is normally flipping back and front buffers by pointer, i.e. The backbuffer or drawing board is not the same as the one just presented, XBMC needs to track dirty regions from the presenting buffer as well. Normally opengl is doublebuffered and thus we track dirty regions for 2 renderings.
Leverage dirty region based rendering as a skinner
The core problem dirty region based rendering tries to solve is to only render what has changed. This is only effective if the changing parts are keept small. While without dirty regions a skinner could create a minimal skin which is rather fast, with dirty region based rendering a skinner have the possibility to present a complex skin with the illusion of fast framerate. What is key here is that if a skinner is able to confine changes to small areas the rendering would be incremental over the entire screen. During google summer of code a cost reduction algorithm was devised to allow for small areas being parted over vast distances to occur. For example if a small change happens in the lower left corner and the upper right corner, the entire screen wouldn't be redrawn.
In the desktop segment XBMC utilizes the GPU to do the YUV to RGB conversion, both to offload these calculations from the CPU but also to limit the uploading bandwith. This is a very optimized approach if the GPU is powerfull enough to do this while still presenting the GUI, on the Beagle board this is sadly not the case. Thankfully the OMAP plattform beagle board is based on have a hardware accelerated display driver which is capable of doing this conversion, scaling and positioning in hardware. The result meant offloading both CPU and GPU from the strain to do this coversion and in turn being able to do this up to 720p resolutions. Sadly the player in xbmc isn't optimized enough to give 720p playback on beagleboard using just the CPU for decoding. The driver is also capable of blending the resulting RGB with the other layers to produce the illusion of having rendered stuff over the resulting video. Which is needed when displaying for example volume changes or on screen menus for control the video.
The overlay reads data from the framebuffers found in /dev/fbX. Multiple overlays can read from the same framebuffer and an overlay can be told to read only from a part of the framebuffer. The display area of the overlay can be larger or smaller then that found in the framebuffer and the overlay will then scale it accordingly. Since the overlay is able to read only part of the data from a framebuffer its possible to create a larger framebuffer than the data its meant to hold to create a front- and backbuffer and switch the location the overlay should read from before presenting. Overlay 1 (video layer) is able to read YUV422 (or RGB) which will be transformed, scaled and positioned before presenting and all is done in hardware. Normally X and SGX is rendering to fb0 which is linked to overlay 0 (graphics layer). Graphics layer is above video layer but interestingly enough by default the display manager sets final alpha to zero on graphics layer when mixing making video layer apearing over graphics. This can be changed however, making it possible to render with alpha to framebuffer 0 and having the ability to choose what will and what will not be above video layer. Note that this is only possible if the framebuffer is set to 32bit BGRA, which it should be by default in Ångström.
Looking back to the beginning of this summer XBMC didn't even compile on Ångström and now its possible to atleast use XBMC and Beagle Board as a fully working SD box. While there still probably exist lots of rendering optimizations and there still is a need to create a really optimized skin I would like to say I am happy with the result. Before xbmc ran at about 10fps (with default skin) which now with dirty region based rendering turned on it runs at almost 20fps (default skin), . The POC optmized skin which looks essentially the same as the default skin runs at 30fps with dirty region based rendering turned on it hits the goal I was aiming for 720p!. Its also clear that the greatest bottleneck is still the GPU which will be significantly faster on the Beagle Board xM it might just be a very viable HD choice for XBMC.