Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (** Beagle/Panda/Panda ES: v3.7.10-x13 kernel)
m (2014-02-16 images)
(24 intermediate revisions by 3 users not shown)
Line 13: Line 13:
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** Kernel Tree's
 
** Kernel Tree's
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.7.x Stable (3.7.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.13.x kernel branch]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 36: Line 36:
  
 
Device Options:
 
Device Options:
  BeagleBoard --uboot beagle_cx
+
  BeagleBoard --dtb omap3-beagle
  BeagleBoard xM --uboot beagle_xm
+
  BeagleBoard xM --dtb omap3-beagle-xm
  BeagleBone (serial) --uboot bone-serial
+
  BeagleBone (serial) --dtb am335x-bone-serial
  BeagleBone (video via cape) --uboot bone-video
+
  BeagleBone (video via cape) --dtb am335x-bone-video
 
  BeagleBone Black --dtb am335x-boneblack
 
  BeagleBone Black --dtb am335x-boneblack
  PandaBoard --uboot panda
+
  PandaBoard (A1->A3) --dtb omap4-panda
  PandaBoard ES  --uboot panda_es
+
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
  PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 51: Line 52:
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  
 
*Options:
 
*Options:
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
 +
  
 
= Demo Image =
 
= Demo Image =
  
== Debian 7 (wheezy)  ==
+
== Debian Stable (wheezy)  ==
  
Default username/password:  
+
Default username/password:
 
*username: debian
 
*username: debian
 
*password: temppwd
 
*password: temppwd
Line 73: Line 75:
  
 
Image Updated:
 
Image Updated:
*2013-08-26
+
*2014-02-16
** fix rtc/fsck issue ... on 2013-08-24
+
** Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
cat /etc/e2fsck.conf
+
** BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
[options]
+
*2014-01-24
broken_system_clock = true
+
** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
*2013-08-24
+
** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
** Beagle xM (ONLY): v3.11.0-rc6-armv7-x10 kernel (--dtb dt-beagle-xm)
+
*2013-12-17
*** 1Ghz operation, NO expansion boards, only DVI out (s-video disabled)
+
** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
*** see: /boot/uboot/tools/pkgs/ti-omapdrm.sh (for xorg drivers)
+
** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone26 kernel
+
*** Lots of hdmi fixes...
+
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+
*2013-07-22
+
 
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
 
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone24 kernel
 
*2013-06-14
 
** shellinabox disabled...
 
** Beagle/Panda/Panda ES: v3.7.10-x12 kernel
 
*** Panda: WiFi works again...
 
** BeagleBone: v3.2.42-psp27 kernel
 
** BeagleBone/BeagleBone Black: v3.8.13-bone21 kernel (--uboot bone_dtb)
 
*** BBB: Now built with the patched 'dtc'...
 
  
 
Services Active:
 
Services Active:
  Note: Depending on your internal network these may work out the box
+
  Note: Depending on your internal network these may work out of the box
 
  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
 
  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
  SSH, Port 22: ssh ubuntu@arm (Bone: via usb) ubuntu@192.168.7.2
+
  SSH, Port 22: ssh debian@arm (Bone: via usb) debian@192.168.7.2
 
  Getty, Serial Port
 
  Getty, Serial Port
  
Active on Boot Script:
+
Default user: debian pass: temppwd
*Disable by removing "run_boot-scripts" from small boot partition...*
+
/opt/boot-scripts/<board>.sh
+
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.1-console-armhf-2013-08-26.tar.xz
+
  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.4-console-armhf-2014-02-16.tar.xz
  
Verify Image with:  
+
Verify Image with:
  md5sum debian-7.1-console-armhf-2013-08-26.tar.xz
+
  md5sum debian-7.4-console-armhf-2014-02-16.tar.xz
  86f0f3d067d3e18fa6451f35f6a4bd08 debian-7.1-console-armhf-2013-08-26.tar.xz
+
  bd3609c5c644d516ac399fca52aeb9a2 debian-7.4-console-armhf-2014-02-16.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xJf debian-7.1-console-armhf-2013-08-26.tar.xz
+
  tar xf debian-7.4-console-armhf-2014-02-16.tar.xz
  cd debian-7.1-console-armhf-2013-08-26
+
  cd debian-7.4-console-armhf-2014-02-16
  
 
Install Image:
 
Install Image:
  
Quick install script for "board"
+
Quick install script for [board]
 
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board
 
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board
  
"board" options:
+
[board] options:
*BeagleBoard Ax/Bx/Cx/Dx    - beagle
+
*BeagleBoard xM      - beagle_xm
+
 
*BeagleBone/Black    - bone
 
*BeagleBone/Black    - bone
*PandaBoard & ES      - panda
 
  
So for the BeagleBoard xM:
+
So for the BeagleBone:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone
  
Quick install script for "board" (using new --dtb option)
+
Quick install script for [board] (using new --dtb option)
 
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
"board" options:
+
board options:
*BeagleBoard xM       - dt-beagle-xm
+
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM             - omap3-beagle-xm
  
 
So for the BeagleBoard xM:
 
So for the BeagleBoard xM:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb dt-beagle-xm
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
  
*Additional Options
+
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
** --rootfs <ext4 default>
+
** --swap_file <swap file size in MB's>
+
** --addon pico <ti pico projector>
+
** --svideo-ntsc <use ntsc over dvi for video)
+
** --svideo-pal <use pal over dvi for video)
+
  
== Debian Jessie (development snapshot) ==
+
git clone git://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2014.02 -b tmp
 +
touch release
 +
./rcn-ee_image.sh
 +
 
 +
== Debian Testing (jessie) ==
  
 
Image Updated:
 
Image Updated:
*2013-08-26
+
*2014-02-16
** fix rtc/fsck issue ... on 2013-08-24
+
** Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
cat /etc/e2fsck.conf
+
** BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
[options]
+
*2014-01-24
broken_system_clock = true
+
** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
*2013-08-24
+
** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
** Beagle xM (ONLY): v3.11.0-rc6-armv7-x10 kernel (--dtb dt-beagle-xm)
+
*2013-12-17
*** 1Ghz operation, NO expansion boards, only DVI out (s-video disabled)
+
** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
*** see: /boot/uboot/tools/pkgs/ti-omapdrm.sh (for xorg drivers)
+
** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone26 kernel
+
*** Lots of hdmi fixes...
+
*2013-07-22
+
 
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
 
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone24 kernel
 
*2013-06-14
 
** shellinabox disabled...
 
** Beagle/Panda/Panda ES: v3.7.10-x12 kernel
 
*** Panda: WiFi works again...
 
** BeagleBone: v3.2.42-psp27 kernel
 
** BeagleBone/BeagleBone Black: v3.8.13-bone21 kernel (--uboot bone_dtb)
 
*** BBB: Now built with the patched 'dtc'...
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2013-08-26.tar.xz
+
  wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-02-16.tar.xz
  
Verify image with:  
+
Verify Image with:
  md5sum debian-jessie-console-armhf-2013-08-26.tar.xz
+
  md5sum debian-jessie-console-armhf-2014-02-16.tar.xz
  e96884f9f4efdcee506f676a5f643408 debian-jessie-console-armhf-2013-08-26.tar.xz
+
  12550b29231c51e76475ec5f37000c5b debian-jessie-console-armhf-2014-02-16.tar.xz
  
 
Unpack image:
 
Unpack image:
  tar xJf debian-jessie-console-armhf-2013-08-26.tar.xz
+
  tar xf debian-jessie-console-armhf-2014-02-16.tar.xz
  cd debian-jessie-console-armhf-2013-08-26
+
  cd debian-jessie-console-armhf-2014-02-16
  
Then follow directions show above with the other images...
+
Then follow the directions shown above with the other images...
  
 
= Flasher =
 
= Flasher =
Line 189: Line 167:
 
== eMMC: BeagleBone Black ==
 
== eMMC: BeagleBone Black ==
  
This image can be written to a 1Gb (or greater) microSD card, via 'dd' in linux or the win32 image program linked to on CircuitCo's wiki page.  First hold down on the boot select button (next to microSD card) and apply  
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
power (same procedure as the official CircuitCo images), it should boot into debian and begin flashing the eMMC, once completed all 4 LED's should be full ON...  Simply remove power, remove microSDcard and Debian will now boot from eMMC.
+
  
Reference: (this is the script that writes to the eMMC)
+
Script for reference: (this is the script that writes to the eMMC)
  https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-copy-microSD-to-eMMC.sh
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/beaglebone-black-eMMC-flasher.sh
  
BTW: we are only writing about 500Mb's to the eMMC so the script will only take about 5-6 Minutes after power on.
+
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
  
 
Notes:
 
Notes:
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Try with a 5Volt DC supply plugged in..
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
* If the 4 LED's blink a constant pattern, eMMC write failed, first REMOVE ALL capes, then retry again.
+
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 
** (error -84: which may mean you've reached the max number of erase/write cycles...)
 
** (error -84: which may mean you've reached the max number of erase/write cycles...)
 +
 +
User: debian
 +
pass: temppwd
 +
 +
root: root/root
  
 
Image Updated:
 
Image Updated:
*2013-08-26
+
*2014-02-16
** fix rtc/fsck issue on 2013-08-24
+
** BeagleBone Black: v3.8.13-bone40 kernel
*2013-08-24
+
*2014-01-24
** BeagleBone Black: v3.8.13-bone26 kernel
+
** BeagleBone Black: v3.8.13-bone37 kernel
*** Lots of hdmi fixes...
+
*2013-12-17
*2013-07-22
+
** BeagleBone Black: v3.8.13-bone32 kernel
** BeagleBone Black: v3.8.13-bone24 kernel
+
*2013-06-14
+
** shellinabox disabled...
+
** BeagleBone Black: v3.8.13-bone21 kernel
+
*** BBB: Now built with the patched 'dtc'...
+
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.1-2013-08-26.img.xz
+
  wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum BBB-eMMC-flasher-debian-7.1-2013-08-26.img.xz
+
  md5sum BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
  6469e84576499f1d3e1da737186a5089 BBB-eMMC-flasher-debian-7.1-2013-08-26.img.xz
+
  75593faa4338380f6e2b94e82376dc95 BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
  
 
Follow the "standard" update procedure.
 
Follow the "standard" update procedure.
 
  http://circuitco.com/support/index.php?title=Updating_The_Software
 
  http://circuitco.com/support/index.php?title=Updating_The_Software
  
= Debian Configuration =
+
Linux:
 +
unxz BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img of=/dev/sdX
  
== Serial Ports ==
+
= raw microSD img =
  
Wheezy
+
== BeagleBoard xM ==
  
edit /etc/inittab and add:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.
  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
+
  
== SGX Video Acceleration ==
+
User: debian
 +
pass: temppwd
  
=== SGX armel/armhf v3.4.x+ ===
+
root: root/root
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
+
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
Image Updated:
git clone git://github.com/RobertCNelson/stable-kernel.git
+
*2014-02-16
cd stable-kernel
+
** Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
git checkout origin/v3.7.x -b tmp
+
./build_kernel.sh (and then follow the directions as the script runs...)
+
  
Build kernel
+
Get prebuilt image:
  ./build_kernel.sh
+
  wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-02-16-2gb.img.xz
  
Build SGX modules
+
Verify Image with:
./sgx_build_modules.sh
+
  md5sum bbxm-debian-7.4-2014-02-16-2gb.img.xz
 
+
  a118de7b1500489ecd4d7263dc06b037 bbxm-debian-7.4-2014-02-16-2gb.img.xz
Insert SD card, make sure to modify MMC in system.sh
+
./tools/install_image.sh
+
 
+
Place SD card into the device and boot...
+
cd /opt/sgx
+
sudo tar xf GFX_4.0*_libs.tar.gz
+
sudo ./install-sgx.sh
+
 
+
Reboot, check modules (lsmod):
+
Module                  Size  Used by
+
bufferclass_ti          5727  0
+
omaplfb                11512  0
+
pvrsrvkm              165208  2 bufferclass_ti,omaplfb
+
 
+
Blit Test:
+
ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
+
------------------ SGX 3D Blit test -----------------
+
----------------------- Start -----------------------
+
Call PVRSRVConnect with a valid argument:
+
  OK
+
  Get number of devices from PVRSRVEnumerateDevices:
+
  OK
+
.... Reported 1 devices
+
.... Device Number  | Device Type
+
            0000    | PVRSRV_DEVICE_ID_SGX
+
Attempt to acquire device 0:
+
  OK
+
Getting SGX Client info
+
  OK
+
.... ui32ProcessID:1133
+
Display Class API: enumerate devices
+
  OK
+
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
+
  OK
+
Display Class API: open device
+
  OK
+
Display Class API: Get display info
+
  OK
+
.... Name:PowerVR OMAP Linux Display Driver
+
.... MaxSwapChains:1
+
.... MaxSwapChainBuffers:1
+
.... MinSwapInterval:0
+
.... MaxSwapInterval:1
+
Display Class API: enumerate display formats
+
  OK
+
  OK
+
.... Display format 0 - Pixelformat:1
+
Display Class API: enumerate display dimensions
+
  OK
+
  OK
+
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
+
Attempt to create memory context for SGX:
+
  OK
+
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
+
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
+
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
+
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
+
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
+
.... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
+
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
+
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
+
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
+
  .... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
+
  .... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
+
Display Class API: get the system (primary) buffer
+
  OK
+
Display Class API: map display surface to SGX
+
  OK
+
Attempt to create transfer context for SGX:
+
  OK
+
Do a SRCCOPY blit to the bottom right quadrant of the display:
+
(bottom right quadrant should be red on blue background):
+
  OK
+
  OK
+
Do a SRCCOPY blit to the top left quadrant of the display:
+
(top left quadrant should be striped (r/g/b/w) on blue background):
+
  OK
+
  OK
+
Do a CUSTOMSHADER blit to the top right quadrant of the display:
+
(top right quadrant should be yellow):
+
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
+
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
+
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
+
  OK
+
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
+
and then present the RGB565 to the bottom right quadrant of the screen
+
(bottom right quadrant should be a red gradient):
+
  OK
+
  OK
+
  OK
+
  OK
+
Free the off screen surfaces:
+
  OK
+
  OK
+
  OK
+
  OK
+
Destroy the transfer context:
+
  OK
+
Display Class API: unmap display surface from SGX
+
  OK
+
Destroy Device Memory Context
+
Display Class API: close the device
+
  OK
+
Release SGX Client Info:
+
  OK
+
Disconnect from services:
+
  OK
+
------------------ SGX 3D Blit test -----------------
+
------------------------ End ------------------------
+
 
+
=== SGX Legacy armel only upto v3.2.x ===
+
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+
 
+
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
  https://github.com/RobertCNelson/stable-kernel
+
 
+
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
https://github.com/RobertCNelson/stable-kernel/issues/8
+
oneiric:
+
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
+
/bin/bash install-me.sh
+
 
+
==== SDK unPackage Script ====
+
 
+
Download the latest version of the "create_sgx_package.sh" script
+
2.6.37
+
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
+
2.6.38->3.2.x
+
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
+
 
+
Make script executable
+
chmod a+x ./create_sgx_package_*.sh
+
 
+
Run script
+
./create_sgx_package_*.sh
+
  
After Successfully running:
+
Linux:
 +
unxz bbxm-debian-7.4-2014-02-16-2gb.img.xz
 +
sudo dd if=./bbxm-debian-7.4-2014-02-16-2gb.img of=/dev/sdX
  
:~/temp$ ls
+
== BeagleBone/BeagleBone Black ==
create_sgx_package.sh
+
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
+
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
+
SDK
+
SDK_BIN
+
  
==== Beagle: GFX_*_libs.tar.gz ====
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
User: debian
./install-SGX.sh (copies necessary SGX libs and startup script)
+
pass: temppwd
./run-SGX.sh (force run the new init script, or you can just reboot...)
+
  
On successful install:
+
root: root/root
Stopping PVR
+
Starting PVR
+
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
+
  
Reboot for good measure
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
Image Updated:
 +
*2014-02-16
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
 +
*2014-01-24
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
 +
*2013-12-17
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
  
  tar xf GFX_Linux_SDK.tar.gz
+
Get prebuilt image:
cd GFX_Linux_SDK
+
  wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.4-2014-02-16-2gb.img.xz
tar xf OGLES.tar.gz
+
  
==== Test SGX with a DEMO ====
+
Verify Image with:
 +
md5sum bone-debian-7.4-2014-02-16-2gb.img.xz
 +
de60cb007a51d74ebe27411d3da76edf  bone-debian-7.4-2014-02-16-2gb.img.xz
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux:
  ./OGLESEvilSkull
+
  unxz bone-debian-7.4-2014-02-16-2gb.img.xz
 +
  sudo dd if=./bone-debian-7.4-2014-02-16-2gb.img of=/dev/sdX
  
==== Trouble Shooting ====
+
= Debian Configuration =
  
sudo rm /etc/powervr-esrev
+
== Serial Ports ==
sudo depmod -a omaplfb
+
sudo /etc/init.d/pvr restart
+
  
== DSP ==
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
 
+
  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
=== gst-dsp ===
+
*Note: This section is BeagleBoard(-xM) only since the BeagleBone (Black) doesn't have a DSP.
+
 
+
The following Gstreamer elements will be installed:
+
 
+
  $ gst-inspect | grep dsp
+
  dvdspu:  dvdspu: Sub-picture Overlay
+
  dsp:  dspdummy: DSP dummy element
+
  dsp:  dspvdec: DSP video decoder
+
  dsp:  dspadec: DSP audio decoder
+
  dsp:  dsph263enc: DSP video encoder
+
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
+
  dsp:  dspjpegenc: DSP video encoder
+
  dsp:  dsph264enc: DSP video encoder
+
  dsp:  dspvpp: DSP VPP filter
+
  dsp:  dspipp: DSP IPP
+
 
+
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
 
+
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+
CONFIG_TIDSPBRIDGE=m
+
CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
+
CONFIG_TIDSPBRIDGE_RECOVERY=y
+
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
+
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
+
# CONFIG_TIDSPBRIDGE_BACKTRACE is not set
+
 
+
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
 
+
Download the latest version of the "create_dsp_package.sh" script
+
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
+
 
+
Make script executable
+
  chmod a+x ./create_dsp_package.sh
+
 
+
Package script:
+
./create_dsp_package.sh
+
 
+
Copy DSP_Install_libs.tar.gz to Beagle
+
 
+
Setup network...
+
 
+
Extract:
+
ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
+
 
+
Install:
+
ubuntu@arm:~$ ./install-DSP.sh
+
 
+
What got installed:
+
ubuntu@arm:~$ ls -lh /lib/dsp/
+
total 7.1M
+
-rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
+
-rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
+
-rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
+
-rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
+
-rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
+
-rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
+
-rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
+
-rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
+
-rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
+
-rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
+
-rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
+
-rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
+
-rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
+
-rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
+
  
Building gst-dsp stuff:
+
To start a console on the USB ACM device, add the following to /etc/inittab,
 +
GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+
==Install Latest Kernel Image==
  
Update arm tools directory to the latest:
+
Script:
  ubuntu@arm:~$ cd /boot/uboot/tools/
+
  cd /opt/scripts/tools
  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+
  git pull
  
Otherwise, install via git:
+
Stable:
  git clone git://github.com/RobertCNelson/tools.git
+
  ./update_kernel.sh
  
Change to the pkgs directory
+
Testing:
ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
+
  ./update_kernel.sh --beta-kernel
  (or if just cloned)
+
ubuntu@arm:~$ cd ~/tools/pkgs
+
  
Build gst-dsp stuff..
+
Custom: (has to be on rcn-ee.net)
  ./ti-tidspbridge.sh
+
  ./update_kernel.sh --kernel v3.8.13-bone37
  
Start dspbridge (or just reboot)
+
Reboot with your new Kernel Image.
sudo /etc/init.d/dsp_init start
+
  
Test dspbridge
+
== Xorg Drivers ==
sudo dsp-test
+
  
Playbin:
+
Script:
  sudo gst-launch playbin2 uri=file://(file)
+
  cd /opt/scripts/tools/
 +
git pull
  
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
BeagleBoard/PandaBoard:
  Note: it seems broken in Ubuntu precise armhf...
+
cd /opt/scripts/tools/graphics/
 +
  ./ti-omapdrm.sh
  
sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
== Building Kernel ==
+
= Building Kernel =
  
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
=== Beagle/Beagle xM ===
+
== Beagle/Beagle xM ==
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
=== BeagleBone ===
+
== BeagleBone ==
 
  http://eewiki.net/display/linuxonarm/BeagleBone
 
  http://eewiki.net/display/linuxonarm/BeagleBone
  
=== BeagleBone Black ===
+
== BeagleBone Black ==
 
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
 
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
=== Panda/Panda ES ===
+
== Panda/Panda ES ==
 
  http://eewiki.net/display/linuxonarm/PandaBoard
 
  http://eewiki.net/display/linuxonarm/PandaBoard
  

Revision as of 17:30, 17 February 2014

This page is about running a (ARM EABI) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABI) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone git://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port


Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Default root user/password

  • user: root
  • password: root

Image Updated:

  • 2014-02-16
    • Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
  • 2014-01-24
    • Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
  • 2013-12-17
    • Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
    • BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
    • Beagle/Panda/Panda ES: v3.7.10-x13 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.4-console-armhf-2014-02-16.tar.xz

Verify Image with:

md5sum debian-7.4-console-armhf-2014-02-16.tar.xz
bd3609c5c644d516ac399fca52aeb9a2  debian-7.4-console-armhf-2014-02-16.tar.xz

Unpack Image:

tar xf debian-7.4-console-armhf-2014-02-16.tar.xz
cd debian-7.4-console-armhf-2014-02-16

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board

[board] options:

  • BeagleBone/Black - bone

So for the BeagleBone:

sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone

Quick install script for [board] (using new --dtb option)

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:

git clone git://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2014.02 -b tmp
touch release
./rcn-ee_image.sh

Debian Testing (jessie)

Image Updated:

  • 2014-02-16
    • Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
  • 2014-01-24
    • Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
  • 2013-12-17
    • Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
    • BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
    • Beagle/Panda/Panda ES: v3.7.10-x13 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-02-16.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2014-02-16.tar.xz
12550b29231c51e76475ec5f37000c5b  debian-jessie-console-armhf-2014-02-16.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2014-02-16.tar.xz
cd debian-jessie-console-armhf-2014-02-16

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/beaglebone-black-eMMC-flasher.sh

BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
    • (error -84: which may mean you've reached the max number of erase/write cycles...)

User: debian pass: temppwd

root: root/root

Image Updated:

  • 2014-02-16
    • BeagleBone Black: v3.8.13-bone40 kernel
  • 2014-01-24
    • BeagleBone Black: v3.8.13-bone37 kernel
  • 2013-12-17
    • BeagleBone Black: v3.8.13-bone32 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
75593faa4338380f6e2b94e82376dc95  BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz

Follow the "standard" update procedure.

http://circuitco.com/support/index.php?title=Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.

User: debian pass: temppwd

root: root/root

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-02-16
    • Beagle/Beagle xM: v3.13.3-armv7-x10 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-02-16-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.4-2014-02-16-2gb.img.xz
a118de7b1500489ecd4d7263dc06b037  bbxm-debian-7.4-2014-02-16-2gb.img.xz

Linux:

unxz bbxm-debian-7.4-2014-02-16-2gb.img.xz
sudo dd if=./bbxm-debian-7.4-2014-02-16-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.

User: debian pass: temppwd

root: root/root

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-02-16
    • BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
  • 2014-01-24
    • BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
  • 2013-12-17
    • BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.4-2014-02-16-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.4-2014-02-16-2gb.img.xz
de60cb007a51d74ebe27411d3da76edf  bone-debian-7.4-2014-02-16-2gb.img.xz

Linux:

unxz bone-debian-7.4-2014-02-16-2gb.img.xz
sudo dd if=./bone-debian-7.4-2014-02-16-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone37

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade