Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
(Add note about enabling ttyS2 login for headless people.)
m (copy/paste error on md5sum)
(447 intermediate revisions by 26 users not shown)
Line 1: Line 1:
 
[[Category: Linux]]
 
[[Category: Linux]]
 
[[Category: OMAP]]
 
[[Category: OMAP]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
[[Category:Development Boards]]
 +
[[Category: BeagleBoard]]
 +
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.  For a more optimized and faster system checkout: [http://mojo.handhelds.org/ Mojo Project] (armv5el & armv6el-vfp editions).  The OMAP3550 on the Beagle Board is armv7-a. See [[BeagleBoardUbuntu|Ubuntu at BeagleBoard]] page, too.
+
= Help =
  
= QEMU =
+
If you need any help:
  
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
+
*Kernel related help:
apt-get install qemu
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
+
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 +
** Kernel Tree's
 +
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.14.x kernel branch]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
==Format SD Card==
+
*When asking for help, please provide some debugging information:
 +
** U-Boot Version installed on board
 +
** Kernel Version: uname -a
 +
** pastebin dmesg
 +
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
 +
 
 +
= Recommended Beagle Software =  
 +
 
 +
Mainline U-Boot:
 +
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 +
 
 +
= Debian NetInstall =
 +
 
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 17: Line 52:
 
  + Desktop environment (GNOME) : ~2.9GB
 
  + Desktop environment (GNOME) : ~2.9GB
  
Currently (Aug 15, 2008) ext2load doesn't seem to work in the current u-boot beagle board git repo. For the moment follow the [http://code.google.com/p/beagleboard/wiki/LinuxBootDiskFormat LinuxBootDisk guide] to setup a 50-100MB FAT partition on your SD Card to use u-boot's fatload.
+
== Debian Wheezy ==
 +
 
 +
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
 +
 
 +
So For the BeagleBoard xM:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
 +
 
 +
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
 +
 
 +
= Demo Image =
 +
 
 +
== Debian Stable (wheezy)  ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
 +
*2014-06-05
 +
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
 +
*2014-05-06
 +
** Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
 +
 
 +
Default user: debian pass: temppwd
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.5-console-armhf-2014-07-06.tar.xz
 +
 
 +
Verify Image with:
 +
md5sum debian-7.5-console-armhf-2014-07-06.tar.xz
 +
a21ea24a1b58a940e87074eee7cc6c09  debian-7.5-console-armhf-2014-07-06.tar.xz
 +
 
 +
Unpack Image:
 +
tar xf debian-7.5-console-armhf-2014-07-06.tar.xz
 +
cd debian-7.5-console-armhf-2014-07-06
 +
 
 +
Install Image:
 +
 
 +
Quick install script for [board]
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2014.07 -b tmp
 +
 
 +
Stable:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
 +
 
 +
Testing:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
 +
 
 +
== Debian Testing (jessie) ==
 +
 
 +
Image Updated:
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
 +
*2014-06-05
 +
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
 +
*2014-05-06
 +
** Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-07-06.tar.xz
 +
 
 +
Verify Image with:
 +
md5sum debian-jessie-console-armhf-2014-07-06.tar.xz
 +
21bffa6ea4fb6242a684a507f2f54518  debian-jessie-console-armhf-2014-07-06.tar.xz
 +
 
 +
Unpack image:
 +
tar xf debian-jessie-console-armhf-2014-07-06.tar.xz
 +
cd debian-jessie-console-armhf-2014-07-06
 +
 
 +
Then follow the directions shown above with the other images...
 +
 
 +
= Flasher =
 +
 
 +
== eMMC: BeagleBone Black ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v2.sh
 +
 
 +
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
** (error -84: which may mean you've reached the max number of erase/write cycles...)
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Image Updated:
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** BeagleBone Black: v3.8.13-bone59 kernel
 +
** NOTE: You'll need to hold the BOOT button on powerup...
 +
*2014-06-05
 +
** BeagleBone Black: v3.8.13-bone56 kernel
 +
*2014-05-06
 +
** BeagleBone Black: v3.8.13-bone49 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
 
 +
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
0881f59320e9d5e8ab515efd7f74ff7c  BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
 
 +
Follow the "standard" update procedure.
 +
http://elinux.org/Beagleboard:Updating_The_Software
 +
 
 +
Linux:
 +
unxz BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX
 +
 
 +
= raw microSD img =
 +
 
 +
== BeagleBoard xM ==
  
Using fdisk and dosfstools on your SD card "/dev/sdX" or use fdisk -l to find device name.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
  
fdisk /dev/sdX
+
User: debian
 +
pass: temppwd
  
Delete all partitions and create a new 50MB FAT partition for uImage
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Disk /dev/sdX: 2038 MB, 2038431744 bytes
+
Image Updated:
255 heads, 63 sectors/track, 247 cylinders
+
*2014-07-06
Units = cylinders of 16065 * 512 = 8225280 bytes
+
** repo now enabled (repos.rcn-ee.net/debian)
Disk identifier: 0x0008e471
+
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
+
*2014-06-05
  Device Boot      Start        End      Blocks  Id  System
+
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
+
*2014-05-06
Command (m for help): n
+
** Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
Command action
 
  e  extended
 
  p  primary partition (1-4)
 
p
 
Partition number (1-4): 1
 
First cylinder (1-247, default 1):
 
Using default value 1
 
Last cylinder or +size or +sizeM or +sizeK (1-247, default 247): +50M
 
 
Command (m for help): t
 
Selected partition 1
 
Hex code (type L to list codes): c
 
Changed system type of partition 1 to c (W95 FAT32 (LBA))
 
 
Command (m for help): a
 
Partition number (1-4): 1
 
 
Command (m for help): w
 
The partition table has been altered!
 
 
Calling ioctl() to re-read partition table.
 
  
Format the 1st partition with dosfstools
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
  
  mkfs.msdos -F 32 /dev/sdX1
+
Verify Image with:
 +
md5sum bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
ef740693e15f4a1d64f799464ca64301  bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
  
For reference, a 2GB sd card will look like this:
+
Linux:
 +
unxz bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
sudo dd if=./bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX
  
Disk /dev/sdb: 2038 MB, 2038431744 bytes
+
== BeagleBone/BeagleBone Black ==
255 heads, 63 sectors/track, 247 cylinders
 
Units = cylinders of 16065 * 512 = 8225280 bytes
 
Disk identifier: 0x0008e471
 
 
  Device Boot      Start        End      Blocks  Id  System
 
/dev/sdb1  *          1          7      56196    c  W95 FAT32 (LBA)
 
  
NOTE: For some reason, on my 256 MB SD card, I had to have End >= 5 AND odd for /dev/sde1 (ie. 6 did not work)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
  
==Preparation==
+
User: debian
 +
pass: temppwd
  
Create a working directory to keep your files organized.
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
mkdir debian-armel
+
Image Updated:
cd debian-armel/
+
*2014-07-06
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
+
** repo now enabled (repos.rcn-ee.net/debian)
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.24-1-versatile
+
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** Black: NOTE: You'll need to hold the BOOT button on powerup...
 +
*2014-06-05
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
*2014-05-06
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel
  
==Install Debian==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
  
To install (ARM EABI) Debian inside QEMU:
+
Verify Image with:
 +
md5sum bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
8a9eacc38febbbdf62e9b73fad725f25  bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
  
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.24-1-versatile -initrd initrd.gz -m 256 -hda /dev/sdX -append "root=/dev/ram mem=256M"
+
Linux:
Note: root/sudo access is required to access /dev/sde directly & verify /dev/sdX with fdisk -l
+
  unxz bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
sudo dd if=./bone-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX
  
Partition disks, default settings should work for most: Guided - use the largest continuous free space
+
== OMAP5432 uEVM ==
  
[[Image:Beagleboarddebian-partitiondisk.png]]
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
  
==Running Debian==
+
User: debian
 +
pass: temppwd
  
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.24-1-versatile -m 256 -hda /dev/sde -append "root=/dev/sda2 mem=256M"
+
Auto partition resize:
 +
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Note: Time will be incorrect.  
+
Image Updated:
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
 +
*2014-06-05
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  
  sudo apt-get install ntpdate
+
Get prebuilt image:
ntpdate pool.ntp.org
+
  wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
  
Install default deb packages for linux-image & linux-headers.
+
Verify Image with:
 +
md5sum omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
 +
0db89db84fea0e5f3a533cc0f55a974f  omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
  
  wget http://www.rcn-ee.com/deb/lenny/2.6.26-omap1-oer61/linux-image-2.6.26-omap1-oer61_2.6.26-omap1-oer61-10.00.Custom_armel.deb
+
Linux:
  wget http://www.rcn-ee.com/deb/lenny/2.6.26-omap1-oer61/linux-headers-2.6.26-omap1-oer61_2.6.26-omap1-oer61-10.00.Custom_armel.deb
+
  unxz omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
sudo dpkg -i *.deb
+
  sudo dd if=./omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX
Note: It's easier to download these straight to the sd card after you've mounted the SD card to copy uImage to the FAT partition.
 
  
Stop QEMU and remount SD card to copy uImage to FAT partition:
+
= Debian Configuration =
  
cd /media/disk-1/
+
== Serial Ports ==
wget http://www.rcn-ee.com/deb/lenny/2.6.26-omap1-oer61/uImage
 
  
=Beagleboard=
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
 +
T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
Insert SD Card and power up Beagleboard.
+
To start a console on the USB ACM device, add the following to /etc/inittab,
 +
GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
==Boot==
+
==Install Latest Kernel Image==
  
Using a terminal program, stop u-boot and add these commands:
+
Script:
 +
cd /opt/scripts/tools
 +
git pull
  
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
Stable:
  setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:vram:2M,vram:4M'
+
  ./update_kernel.sh
boot
 
  
To force the Beagleboard to always boot the sd card image:
+
Testing:
 +
./update_kernel.sh --beta-kernel
  
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
Custom: (has to be on rcn-ee.net)
  setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:vram:2M,vram:4M'
+
  ./update_kernel.sh --kernel v3.8.13-bone59
saveenv
 
boot
 
  
Note: 'rootwait' only works with newer kernels, for 2.6.22.18-omap3 use 'rootdelay=2', otherwise this error:
+
Reboot with your new Kernel Image.
VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0)
 
Please append a correct "root=" boot option; here are the available partitions:
 
1f00        512 mtdblock01f00        512 mtdblock0 (driver?)
 
1f01      1920 mtdblock11f01      1920 mtdblock1 (driver?)
 
1f02        128 mtdblock21f02        128 mtdblock2 (driver?)
 
1f03      5120 mtdblock31f03      5120 mtdblock3 (driver?)
 
1f04    254464 mtdblock41f04    254464 mtdblock4 (driver?)
 
  
==Debian on Beagleboard==
+
== Xorg Drivers ==
  
Debian on BeagleBoard uses the following configuration:
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
* Console log = Serial Terminal
+
BeagleBoard/PandaBoard:
* User Console = HDMI port + usb (keyboard, mouse, etc)
+
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
If you want to log in with the serial port, you will have to add to /etc/inittab
+
BeagleBone/BeagleBone Black:
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
And if you want to log in as root on the serial port, add ttyS2 to /etc/securetty.
+
== SGX Drivers ==
  
===Xorg===
+
=== SGX BeagleBone/BeagleBone Black ===
Modify /etc/X11/xorg.conf
 
Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
[[Image:Beagleboarddebian-GNOME.jpg]]
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Note: 'fbdev' is normally *slow* since it completely relies on the system cpu to update the framebuffer. Once the video processing core's driver is released this will no longer be an issue.
+
Install "special" Kernel
 +
cd /opt/scripts/tools
 +
git pull
 +
sudo ./update_kernel.sh --kernel v3.13.11-bone12
  
=Current Issues=
+
Build SGX modules/userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v3.13 -b tmp-sgx
 +
./build_kernel.sh
 +
./sgx_build_modules.sh
  
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
+
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue date MMDDHHMMYYYY
+
sudo tar xfv GFX_5.01.01.01.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
=Building a Native Debian Kernel with QEMU=
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
==Install Dependencies==
+
SGX Demos
   
+
  cd /opt/gfxsdkdemos/ogles2/
  apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev
+
  ./OGLES2ChameleonMan
  
==u-boot==
+
= Building Kernel =
  
wget -nc http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
tar -xf u-boot_beagle_revb.tar.gz
 
cd u-boot/
 
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3530beagle_config
 
make CROSS_COMPILE= tools
 
  
Add /tools/ to $PATH
+
== Beagle/Beagle xM ==
  PATH=/home/<user>/u-boot/tools:"${PATH}"
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
==Linux Kernel==
+
== BeagleBone ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone
  
  git clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
== BeagleBone Black ==
cd linux-omap-2.6/
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
git checkout -b beagle <tag>
 
  
Patch Kernel as you see fit
+
== Panda/Panda ES ==
  patch -p1 < ../patches/*.patch
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
Setup Kernel .config
+
= Upgrading from Debian 5 to Debian 6 =
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3_beagle_defconfig
 
  
Create Debian linux-image* & linux-headers* Package
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
make-kpkg --cross_compile - clean
 
CONCURRENCY_LEVEL=1 fakeroot make-kpkg --cross_compile - --initrd kernel_image kernel_headers
 
  
Create U-boot uImage
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
make CROSS_COMPILE= uImage
 
  
Issues:
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
Debian's gcc-4.3 will fail to build a bootable uImage, so use gcc-4.2 as gcc thru 'update-alternatives'
 
  
==Successfully Built Images==
+
sudo apt-get update ; sudo apt-get upgrade
[http://www.rcn-ee.com/code/beagle/debian/lenny/ Example Debian Lenny Kernel Images]
+
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 14:59, 9 July 2014

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  • 2014-05-06
    • Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.5-console-armhf-2014-07-06.tar.xz

Verify Image with:

md5sum debian-7.5-console-armhf-2014-07-06.tar.xz
a21ea24a1b58a940e87074eee7cc6c09  debian-7.5-console-armhf-2014-07-06.tar.xz

Unpack Image:

tar xf debian-7.5-console-armhf-2014-07-06.tar.xz
cd debian-7.5-console-armhf-2014-07-06

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2014.07 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  • 2014-05-06
    • Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-07-06.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2014-07-06.tar.xz
21bffa6ea4fb6242a684a507f2f54518  debian-jessie-console-armhf-2014-07-06.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2014-07-06.tar.xz
cd debian-jessie-console-armhf-2014-07-06

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v2.sh

BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
    • (error -84: which may mean you've reached the max number of erase/write cycles...)

User: debian pass: temppwd

Image Updated:

  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone Black: v3.8.13-bone59 kernel
    • NOTE: You'll need to hold the BOOT button on powerup...
  • 2014-06-05
    • BeagleBone Black: v3.8.13-bone56 kernel
  • 2014-05-06
    • BeagleBone Black: v3.8.13-bone49 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
0881f59320e9d5e8ab515efd7f74ff7c  BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
  • 2014-05-06
    • Beagle/Beagle xM: v3.14.2-armv7-x5 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
ef740693e15f4a1d64f799464ca64301  bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Linux:

unxz bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
sudo dd if=./bbxm-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • Black: NOTE: You'll need to hold the BOOT button on powerup...
  • 2014-06-05
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
  • 2014-05-06
    • BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
8a9eacc38febbbdf62e9b73fad725f25  bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Linux:

unxz bone-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
sudo dd if=./bone-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
0db89db84fea0e5f3a533cc0f55a974f  omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.5-console-armhf-2014-07-06-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone59

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install "special" Kernel

cd /opt/scripts/tools
git pull
sudo ./update_kernel.sh --kernel v3.13.11-bone12

Build SGX modules/userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v3.13 -b tmp-sgx
./build_kernel.sh
./sgx_build_modules.sh

Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.01.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

SGX Demos

cd /opt/gfxsdkdemos/ogles2/
./OGLES2ChameleonMan

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade