Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Development PC: Setup U-boot for Normal Boot)
m (missed the name..)
(164 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
** Kernel Tree's
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Stable Kernel 2.6.34 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.14.x kernel branch]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6.35-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
** [http://elinux.org/BeagleBoardUbuntuKernel Kernel Testing Results]
 
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 24: Line 21:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
* Recent x-loader/MLO (1.4.4ss)
 
** All Bx C2/3/4 Boards should upgrade their MLO from here: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-boot]
 
  
* Recent U-Boot (2010.03-rc1)
+
Mainline U-Boot:
** u-boot.bin from here: http://www.angstrom-distribution.org/beagleboard-demo-image-available
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
** Or this one I've archived: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-boot]
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
*** Version 2009.01 (factory installed on C2/3's) and earlier will not work with this guide
+
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
*** Version 2009.11-rc1-00601-g3aa4b51 (factory installed on C4's) should be upgraded
 
*** 'mmc init' change [http://git.denx.de/?p=u-boot.git;a=commit;h=a85693b3bd4431b05b7df608b6f7733c0f80c53e]
 
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 42: Line 52:
 
  + Desktop environment (GNOME) : ~2.9GB
 
  + Desktop environment (GNOME) : ~2.9GB
  
== Debian Squeeze ==
+
== Debian Wheezy ==
  
Currently in beta-2 but the netinstall is pretty reliable. (12/30/2010)
+
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
  
git clone git://github.com/RobertCNelson/netinstall-omap.git
+
So For the BeagleBoard xM:
cd netinstall-omap
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  ./mk_mmc.sh --mmc /dev/sdX --distro squeeze --firmware
 
  
 
*Options:
 
*Options:
**--distro : squeeze, lucid
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
  
On first boot, hold down the user button, this enables the debian-installer..
+
= Demo Image =
  
Note: The default options work for most people, but if you'd like to tweak boot settings, edit these before running the script.
+
== Debian Stable (wheezy) ==
   
 
NetInstall boot Settings:
 
gedit ./netinstall-omap/scripts/dvi.cmd
 
gedit ./netinstall-omap/scripts/serial.cmd
 
 
Normal Boot Settings:
 
gedit ./netinstall-omap/scripts/dvi-normal-squeeze.cmd
 
gedit ./netinstall-omap/scripts/serial-normal-squeeze.cmd
 
  
== Debian Lenny ==
+
Default username/password:
 +
*username: debian
 +
*password: temppwd
  
Starting with an empty SD card and using gparted, create:
+
Image Updated:
50 MiB Primary Partition, fat32
+
*2014-08-13
Leave remaining space for the Debian-Installer
+
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
 +
*2014-06-05
 +
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  
  Mount your SD card fat32 partition. (/media/disk/)
+
Services Active:
 +
  Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
  
cd /media/disk/
+
Default user: debian pass: temppwd
sudo wget http://rcn-ee.net/deb/kernel/CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage
 
sudo wget http://ftp.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
sudo mv CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage uImage
 
sudo gzip -d initrd.gz
 
sudo dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
  
Create U-boot boot script for netinstall:
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.6-console-armhf-2014-08-13.tar.xz
  
Debian Install over DVI Port
+
Verify Image with:
  sudo nano netinstall.cmd
+
  md5sum debian-7.6-console-armhf-2014-08-13.tar.xz
  setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+
  b423d3922f647c21d65ce31473863584  debian-7.6-console-armhf-2014-08-13.tar.xz
setenv bootargs 'console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M omapfb.mode=dvi:1280x720MR-16@60'
 
boot
 
  
Debian Install over the Serial Port
+
Unpack Image:
  sudo nano netinstall.cmd
+
  tar xf debian-7.6-console-armhf-2014-08-13.tar.xz
  setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+
  cd debian-7.6-console-armhf-2014-08-13
setenv bootargs 'console=ttyS2,115200n8 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M'
 
boot
 
  
Create U-boot *.scr file:
+
Install Image:
  
  sudo mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./netinstall.cmd ./boot.scr
+
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
Sync and Unmount your mmc card and boot the beagle, it should find the 'boot.scr' file on your first partition while booting.
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
  
==Beagleboard: NetInstall==
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
Choose a language
+
Advanced: Build Image:
  C - No localization
 
  English - English
 
  
Configure the network:
+
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
  usb0: USB net <- See below for 2.6.29. Could not find usb0 with B7 installing 2.6.28.
 
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
cd omap-image-builder
 +
git checkout v2014.08 -b tmp
  
Configuring usb0 network bridge for 2.6.29:
+
Stable:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
 
  # ifconfig ethX 0.0.0.0
 
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Testing:
  Logical Volume Manager not available: <Continue>
 
  
  Partition disks:
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
  Guided - Use the largest continuous free space
 
  
Partitioning scheme....
+
== Debian Testing (jessie) ==
  
Example:
+
Image Updated:
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
*2014-08-13
>  #1 primary  57.5 MB    fat32
+
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
>  #2 primary  1.8 GB B f ext3  /
+
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
>  #5 logical 148.0 MB  f swap  swap
+
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
Finish partitioning and write changes to disk
+
*2014-07-06
  Write the changes to disk? : <yes>
+
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
 +
*2014-06-05
 +
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  
No installable kernel was found in the defined APT sources? :  
+
Get prebuilt image:
  Continue without installing a kernel? : <yes>
+
wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-08-13.tar.xz
  
  Standard System
+
Verify Image with:
 +
  md5sum debian-jessie-console-armhf-2014-08-13.tar.xz
 +
188687f57d5bc9f60c7b939100d44273  debian-jessie-console-armhf-2014-08-13.tar.xz
  
  No BootLoader: <ok>
+
Unpack image:
 +
  tar xf debian-jessie-console-armhf-2014-08-13.tar.xz
 +
cd debian-jessie-console-armhf-2014-08-13
  
==Development PC: Setup U-boot for Normal Boot==
+
Then follow the directions shown above with the other images...
  
(IGNORE WITH SQUEEZE)
+
= Flasher =
  
Planning to remove this section, pending Squeeze's Release...  I moved the relevant data to: http://elinux.org/BeagleBoardDebian#U-boot_Scripts
+
== eMMC: BeagleBone Black ==
  
Create a U-boot normal boot script:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
DVI Port
+
Script for reference: (this is the script that writes to the eMMC)
  sudo nano normal.cmd
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v2.sh
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
 
boot
 
  
Serial Port
+
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
sudo nano normal.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
 
boot
 
  
Create U-boot *.scr file:
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
** (error -84: which may mean you've reached the max number of erase/write cycles...)
  
sudo mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./normal.cmd ./boot.scr
+
User: debian
 +
pass: temppwd
  
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+
Image Updated:
 +
*2014-08-13
 +
** BeagleBone Black: v3.8.13-bone63 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** BeagleBone Black: v3.8.13-bone59 kernel
 +
** NOTE: You'll need to hold the BOOT button on powerup...
 +
*2014-06-05
 +
** BeagleBone Black: v3.8.13-bone56 kernel
  
==Beagleboard: Install Latest Kernel==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
Script File:
+
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
60f1406c104d47d6f6be4d7a879c3c46  BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
Lenny:
+
Follow the "standard" update procedure.
  wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.11-x13/install-me.sh
+
  http://elinux.org/Beagleboard:Updating_The_Software
  sudo /bin/bash install-me.sh
+
 
+
Linux:
Squeeze:
+
unxz BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
export DIST=squeeze
+
  sudo dd if=./BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
wget http://rcn-ee.net/deb/${DIST}/LATEST
+
 
  wget $(cat ./LATEST | grep STABLE | awk '{print $3}')
+
= raw microSD img =
  /bin/bash install-me.sh
+
 
 +
== BeagleBoard (classic) ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
  git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
Reboot with your new Kernel
+
Image Updated:
 +
*2014-08-13
 +
** Beagle: v3.16.0-armv7-x4 kernel
  
= Debian Configuration =
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
== U-boot Scripts ==
+
Verify Image with:
 +
md5sum bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
7eb8d27aac84aa014140640ed5fe43ea  bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
Create a U-boot normal boot script:
+
Linux:
 +
unxz bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
sudo dd if=./bb-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
  
DVI Port
+
== BeagleBoard xM ==
sudo nano normal.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
 
boot
 
  
Serial Port
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo nano normal.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
 
boot
 
  
Create U-boot *.scr file:
+
User: debian
 +
pass: temppwd
  
  sudo mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./normal.cmd ./boot.scr
+
Auto partition resize:
 +
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+
Image Updated:
 +
*2014-08-13
 +
** Beagle xM: v3.16.0-armv7-x4 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
 +
*2014-06-05
 +
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
  
== Serial Ports ==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
Lenny
+
Verify Image with:
 +
md5sum bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
6babb57043cf8f611db9d7e5957be711  bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
edit /etc/inittab and add:
+
Linux:
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
  unxz bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
sudo dd if=./bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
  
For root access over the serial port add ttyS2 to /etc/securetty
+
== BeagleBone/BeagleBone Black ==
  
== WiFi ==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
User: debian
 +
pass: temppwd
  
== SGX Video Acceleration ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Note: With 3_01_00_07 we don't have to register any more, the file is fully wget-able..
+
Image Updated:
 +
*2014-08-13
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** Black: NOTE: You'll need to hold the BOOT button on powerup...
 +
*2014-06-05
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
  
http://tigraphics.blogspot.com/2010/08/sgx-graphics-sdk-3010007-now-available.html.
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net
+
Verify Image with:
  https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
+
md5sum bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
f925d35517b3938e67d9108f6abd3c4b  bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
Linux:
 +
unxz bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
sudo dd if=./bone-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
  
=== SDK unPackage Script ===
+
== OMAP5432 uEVM ==
  
Download the latest version of the "create_sgx_package.sh" script
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
http://bazaar.launchpad.net/~beagleboard-kernel/%2Bjunk/2.6-stable/annotate/head:/create_sgx_package.sh (click: download file)
 
  
:~/temp$ ls
+
User: debian
create_sgx_package.sh
+
pass: temppwd
  
Make script executable
+
Auto partition resize:
  chmod a+x ./create_sgx_package.sh
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
Run script
+
Image Updated:
./create_sgx_package.sh
+
*2014-08-13
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
 +
*2014-06-05
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  
After Successfully running:
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
:~/temp$ ls
+
Verify Image with:
  create_sgx_package.sh
+
  md5sum omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
GFX_3_01_00_07_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  4ce216650b5a773ea84ea7d9ea239d88  omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
OMAP35x_Graphics_SDK_setuplinux_3_01_00_07.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
Linux:
 +
unxz omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
  
tar xf GFX_3_01_00_07_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
= Debian Configuration =
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
== Serial Ports ==
Stopping PVR
 
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure (Maverick's Alpha-1 needs this....)
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
  sudo reboot
+
  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
To start a console on the USB ACM device, add the following to /etc/inittab,
 +
GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
tar xf GFX_Linux_SDK.tar.gz
+
==Install Latest Kernel Image==
cd GFX_Linux_SDK
 
tar xf OGLES.tar.gz
 
  
=== Test SGX with a DEMO ===
+
Script:
 +
cd /opt/scripts/tools
 +
git pull
  
cd OGLES/SDKPackage/Binaries/CommonX11/Demos/ChameleonMan
+
Stable:
  ./OGLESChameleonMan
+
  ./update_kernel.sh
  
=== Trouble Shooting ===
+
Testing:
 +
./update_kernel.sh --beta-kernel
  
  sudo rm /etc/powervr-esrev
+
Custom: (has to be on rcn-ee.net)
sudo depmod -a omaplfb
+
  ./update_kernel.sh --kernel v3.8.13-bone59
sudo /etc/init.d/pvr restart
 
  
== Xorg omapfb Drivers ==
+
Reboot with your new Kernel Image.
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Xorg Drivers ==
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
/etc/X11/xorg.conf:
+
BeagleBoard/PandaBoard:
  Section "Device"
+
  cd /opt/scripts/tools/graphics/
Identifier "Configured Video Device"
+
  ./ti-omapdrm.sh
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
BeagleBone/BeagleBone Black:
(II) FBDEV: driver for framebuffer: fbdev
+
  cd /opt/scripts/tools/graphics/
  (II) FBDEV(0): using default device
+
  ./ti-tilcdc.sh
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== SGX Drivers ==
  
xvinfo -display :0.0
+
=== SGX BeagleBone/BeagleBone Black ===
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
Install "special" Kernel
 +
cd /opt/scripts/tools
 +
git pull
 +
sudo ./update_kernel.sh --kernel v3.15.8-bone6
  
Lenny:
+
Build SGX modules/userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  git clone https://github.com/RobertCNelson/bb-kernel.git
  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
cd bb-kernel/
 +
git checkout origin/am33x-v3.15 -b tmp-sgx
 +
./build_kernel.sh
 +
  ./sgx_build_modules.sh
  
Squeeze/Sid:
+
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
  sudo apt-get install xserver-xorg-video-omap3
+
sudo tar xfv GFX_5.01.01.01.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
  sudo ./sgx-install.sh
 +
sudo reboot
  
=== xorg.conf ===
+
Verify omaplfb & pvrsrvkm loaded
/etc/X11/xorg.conf
+
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
Section "Monitor"
+
SGX Demos
    Identifier "Configured Monitor"
+
  cd /opt/gfxsdkdemos/ogles2/
EndSection
+
  ./OGLES2ChameleonMan
 
Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
  EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
= Building Kernel =
  
cat /var/log/Xorg.0.log | grep omapfb
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
xvinfo -display :0.0
+
== BeagleBone ==
  X-Video Extension version 2.2
+
  http://eewiki.net/display/linuxonarm/BeagleBone
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== DSP ==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
= Kernel Build =
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
https://launchpad.net/~beagleboard-kernel
+
= Upgrading from Debian 5 to Debian 6 =
  
Register on launchpad.net, install bzr
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
sudo apt-get install bzr
 
  
Download SRC
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
  
Build Kernel
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
./build_kernel.sh
 
  
Build Deb File
+
sudo apt-get update ; sudo apt-get upgrade
  ./build_deb.sh
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 15:09, 14 August 2014

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.6-console-armhf-2014-08-13.tar.xz

Verify Image with:

md5sum debian-7.6-console-armhf-2014-08-13.tar.xz
b423d3922f647c21d65ce31473863584  debian-7.6-console-armhf-2014-08-13.tar.xz

Unpack Image:

tar xf debian-7.6-console-armhf-2014-08-13.tar.xz
cd debian-7.6-console-armhf-2014-08-13

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2014.08 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-08-13.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2014-08-13.tar.xz
188687f57d5bc9f60c7b939100d44273  debian-jessie-console-armhf-2014-08-13.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2014-08-13.tar.xz
cd debian-jessie-console-armhf-2014-08-13

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v2.sh

BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
    • (error -84: which may mean you've reached the max number of erase/write cycles...)

User: debian pass: temppwd

Image Updated:

  • 2014-08-13
    • BeagleBone Black: v3.8.13-bone63 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone Black: v3.8.13-bone59 kernel
    • NOTE: You'll need to hold the BOOT button on powerup...
  • 2014-06-05
    • BeagleBone Black: v3.8.13-bone56 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
60f1406c104d47d6f6be4d7a879c3c46  BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • Beagle: v3.16.0-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
7eb8d27aac84aa014140640ed5fe43ea  bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./bb-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • Beagle xM: v3.16.0-armv7-x4 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
6babb57043cf8f611db9d7e5957be711  bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • Black: NOTE: You'll need to hold the BOOT button on powerup...
  • 2014-06-05
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
f925d35517b3938e67d9108f6abd3c4b  bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./bone-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
4ce216650b5a773ea84ea7d9ea239d88  omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone59

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install "special" Kernel

cd /opt/scripts/tools
git pull
sudo ./update_kernel.sh --kernel v3.15.8-bone6

Build SGX modules/userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v3.15 -b tmp-sgx
./build_kernel.sh
./sgx_build_modules.sh

Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.01.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

SGX Demos

cd /opt/gfxsdkdemos/ogles2/
./OGLES2ChameleonMan

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade