Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m
m (missed the name..)
 
(26 intermediate revisions by 4 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
 
= Help =
 
= Help =
Line 10: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** Kernel Tree's
 
** Kernel Tree's
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.13.x kernel branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.14.x kernel branch]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 21: Line 21:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
Line 32: Line 35:
  
 
Scripts:
 
Scripts:
  git clone git://github.com/RobertCNelson/netinstall.git
+
  git clone https://github.com/RobertCNelson/netinstall.git
 
  cd netinstall
 
  cd netinstall
  
Line 60: Line 63:
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
 
  
 
= Demo Image =
 
= Demo Image =
Line 69: Line 71:
 
*username: debian
 
*username: debian
 
*password: temppwd
 
*password: temppwd
 
Default root user/password
 
*user: root
 
*password: root
 
  
 
Image Updated:
 
Image Updated:
*2014-01-24
+
*2014-08-13
** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
+
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
*2013-12-17
+
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
+
*2014-07-06
** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+
** repo now enabled (repos.rcn-ee.net/debian)
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
*2013-11-15
+
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
** Beagle xM (ONLY): v3.12.0-armv7-x8 kernel (--dtb dt-beagle-xm)
+
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone30 kernel
+
*2014-06-05
*** audio/mmc fixes...
+
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  
 
Services Active:
 
Services Active:
 
  Note: Depending on your internal network these may work out of the box
 
  Note: Depending on your internal network these may work out of the box
  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
+
  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  SSH, Port 22: ssh debian@arm (Bone: via usb) debian@192.168.7.2
+
  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 
  Getty, Serial Port
 
  Getty, Serial Port
  
Line 97: Line 96:
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.3-console-armhf-2014-01-24.tar.xz
+
  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.6-console-armhf-2014-08-13.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum debian-7.3-console-armhf-2014-01-24.tar.xz
+
  md5sum debian-7.6-console-armhf-2014-08-13.tar.xz
  47a2221a3f5a46d69f45148401d9952a debian-7.3-console-armhf-2014-01-24.tar.xz
+
  b423d3922f647c21d65ce31473863584 debian-7.6-console-armhf-2014-08-13.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xf debian-7.3-console-armhf-2014-01-24.tar.xz
+
  tar xf debian-7.6-console-armhf-2014-08-13.tar.xz
  cd debian-7.3-console-armhf-2014-01-24
+
  cd debian-7.6-console-armhf-2014-08-13
  
 
Install Image:
 
Install Image:
  
 
Quick install script for [board]
 
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board
 
 
[board] options:
 
*BeagleBone/Black    - bone
 
 
So for the BeagleBone:
 
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone
 
 
Quick install script for [board] (using new --dtb option)
 
 
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
Line 124: Line 114:
 
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 
*BeagleBoard xM            - omap3-beagle-xm
 
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
  
 
So for the BeagleBoard xM:
 
So for the BeagleBoard xM:
Line 132: Line 124:
 
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
 
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
  
  git clone git://github.com/RobertCNelson/omap-image-builder.git
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2014.01-1 -b tmp
+
  git checkout v2014.08 -b tmp
touch release
+
 
  ./rcn-ee_image.sh
+
Stable:
 +
 
 +
  ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
 +
 
 +
Testing:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
  
 
== Debian Testing (jessie) ==
 
== Debian Testing (jessie) ==
  
 
Image Updated:
 
Image Updated:
*2014-01-24
+
*2014-08-13
** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
+
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
*2013-12-17
+
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
+
*2014-07-06
** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+
** repo now enabled (repos.rcn-ee.net/debian)
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
*2013-11-15
+
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
** Beagle xM (ONLY): v3.12.0-armv7-x8 kernel (--dtb dt-beagle-xm)
+
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone30 kernel
+
*2014-06-05
*** audio/mmc fixes...
+
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-01-24.tar.xz
+
  wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-08-13.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum debian-jessie-console-armhf-2014-01-24.tar.xz
+
  md5sum debian-jessie-console-armhf-2014-08-13.tar.xz
  010484bd42bef9484a48c54d076a878f debian-jessie-console-armhf-2014-01-24.tar.xz
+
  188687f57d5bc9f60c7b939100d44273 debian-jessie-console-armhf-2014-08-13.tar.xz
  
 
Unpack image:
 
Unpack image:
  tar xf debian-jessie-console-armhf-2014-01-24.tar.xz
+
  tar xf debian-jessie-console-armhf-2014-08-13.tar.xz
  cd debian-jessie-console-armhf-2014-01-24
+
  cd debian-jessie-console-armhf-2014-08-13
  
 
Then follow the directions shown above with the other images...
 
Then follow the directions shown above with the other images...
Line 171: Line 170:
 
== eMMC: BeagleBone Black ==
 
== eMMC: BeagleBone Black ==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
 
Script for reference: (this is the script that writes to the eMMC)
 
Script for reference: (this is the script that writes to the eMMC)
  https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-copy-microSD-to-eMMC.sh
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v2.sh
  
 
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
 
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
Line 185: Line 184:
 
User: debian
 
User: debian
 
pass: temppwd
 
pass: temppwd
 
root: root/root
 
  
 
Image Updated:
 
Image Updated:
*2014-01-24
+
*2014-08-13
** BeagleBone Black: v3.8.13-bone37 kernel
+
** BeagleBone Black: v3.8.13-bone63 kernel
*2013-12-17
+
*2014-07-06
** BeagleBone Black: v3.8.13-bone32 kernel
+
** repo now enabled (repos.rcn-ee.net/debian)
*2013-11-15
+
** BeagleBone Black: v3.8.13-bone59 kernel
** BeagleBone Black: v3.8.13-bone30 kernel
+
** NOTE: You'll need to hold the BOOT button on powerup...
*** ssh host key fixes (auto generated on bootup...)
+
*2014-06-05
 +
** BeagleBone Black: v3.8.13-bone56 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+
  wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+
  md5sum BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  1b88194ce6f1a8b06195a8168b21b2d9 BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+
  60f1406c104d47d6f6be4d7a879c3c46 BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
 
Follow the "standard" update procedure.
 
Follow the "standard" update procedure.
  http://circuitco.com/support/index.php?title=Updating_The_Software
+
  http://elinux.org/Beagleboard:Updating_The_Software
  
 
Linux:
 
Linux:
  unxz BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+
  unxz BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  sudo dd if=./BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img of=/dev/sdX
+
  sudo dd if=./BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
  
 
= raw microSD img =
 
= raw microSD img =
  
== BeagleBone ==
+
== BeagleBoard (classic) ==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
 
User: debian
 
User: debian
 
pass: temppwd
 
pass: temppwd
  
root: root/root
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2014-08-13
 +
** Beagle: v3.16.0-armv7-x4 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
md5sum bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
7eb8d27aac84aa014140640ed5fe43ea  bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
 
 +
Linux:
 +
unxz bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
sudo dd if=./bb-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
 +
 
 +
== BeagleBoard xM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
  
 
Auto partition resize:
 
Auto partition resize:
Line 229: Line 253:
  
 
Image Updated:
 
Image Updated:
*2014-01-24
+
*2014-08-13
** BeagleBone Black: v3.8.13-bone37 kernel
+
** Beagle xM: v3.16.0-armv7-x4 kernel
*2013-12-17
+
*2014-07-06
** BeagleBone Black: v3.8.13-bone32 kernel
+
** repo now enabled (repos.rcn-ee.net/debian)
*2013-11-15
+
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
** BeagleBone Black: v3.8.13-bone30 kernel
+
*2014-06-05
 +
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.3-2014-01-24-2gb.img.xz
+
  wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum bone-debian-7.3-2014-01-24-2gb.img.xz
+
  md5sum bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  7ed1d0f198f9ae49393ed39a7cad6a41 bone-debian-7.3-2014-01-24-2gb.img.xz
+
  6babb57043cf8f611db9d7e5957be711 bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  
 
Linux:
 
Linux:
  unxz bone-debian-7.3-2014-01-24-2gb.img.zx
+
  unxz bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
  sudo dd if=./bone-debian-7.3-2014-01-24-2gb.img of=/dev/sdX
+
sudo dd if=./bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
 +
 
 +
== BeagleBone/BeagleBone Black ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2014-08-13
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** Black: NOTE: You'll need to hold the BOOT button on powerup...
 +
*2014-06-05
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
md5sum bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
f925d35517b3938e67d9108f6abd3c4b  bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
 
 +
Linux:
 +
unxz bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
  sudo dd if=./bone-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
 +
 
 +
== OMAP5432 uEVM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2014-08-13
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
 +
*2014-06-05
 +
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
md5sum omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
4ce216650b5a773ea84ea7d9ea239d88  omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
 
 +
Linux:
 +
unxz omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX
  
 
= Debian Configuration =
 
= Debian Configuration =
  
 
== Serial Ports ==
 
== Serial Ports ==
 
=== Wheezy ===
 
  
 
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
 
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
Line 258: Line 348:
 
To start a console on the USB ACM device, add the following to /etc/inittab,
 
To start a console on the USB ACM device, add the following to /etc/inittab,
 
  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
 
  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
 +
 +
==Install Latest Kernel Image==
 +
 +
Script:
 +
cd /opt/scripts/tools
 +
git pull
 +
 +
Stable:
 +
./update_kernel.sh
 +
 +
Testing:
 +
./update_kernel.sh --beta-kernel
 +
 +
Custom: (has to be on rcn-ee.net)
 +
./update_kernel.sh --kernel v3.8.13-bone59
 +
 +
Reboot with your new Kernel Image.
 +
 +
== Xorg Drivers ==
 +
 +
Script:
 +
cd /opt/scripts/tools/
 +
git pull
 +
 +
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
 +
 +
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
 +
 +
== SGX Drivers ==
 +
 +
=== SGX BeagleBone/BeagleBone Black ===
 +
 +
Note, these are FBDEV only, no xorg/x11/etc...
 +
 +
Install "special" Kernel
 +
cd /opt/scripts/tools
 +
git pull
 +
sudo ./update_kernel.sh --kernel v3.15.8-bone6
 +
 +
Build SGX modules/userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v3.15 -b tmp-sgx
 +
./build_kernel.sh
 +
./sgx_build_modules.sh
 +
 +
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
 +
sudo tar xfv GFX_5.01.01.01.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
 +
 +
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
 +
 +
SGX Demos
 +
cd /opt/gfxsdkdemos/ogles2/
 +
./OGLES2ChameleonMan
  
 
= Building Kernel =
 
= Building Kernel =

Latest revision as of 22:09, 14 August 2014

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.6-console-armhf-2014-08-13.tar.xz

Verify Image with:

md5sum debian-7.6-console-armhf-2014-08-13.tar.xz
b423d3922f647c21d65ce31473863584  debian-7.6-console-armhf-2014-08-13.tar.xz

Unpack Image:

tar xf debian-7.6-console-armhf-2014-08-13.tar.xz
cd debian-7.6-console-armhf-2014-08-13

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2014.08 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-08-13.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2014-08-13.tar.xz
188687f57d5bc9f60c7b939100d44273  debian-jessie-console-armhf-2014-08-13.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2014-08-13.tar.xz
cd debian-jessie-console-armhf-2014-08-13

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v2.sh

BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
    • (error -84: which may mean you've reached the max number of erase/write cycles...)

User: debian pass: temppwd

Image Updated:

  • 2014-08-13
    • BeagleBone Black: v3.8.13-bone63 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone Black: v3.8.13-bone59 kernel
    • NOTE: You'll need to hold the BOOT button on powerup...
  • 2014-06-05
    • BeagleBone Black: v3.8.13-bone56 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
60f1406c104d47d6f6be4d7a879c3c46  BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • Beagle: v3.16.0-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
7eb8d27aac84aa014140640ed5fe43ea  bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz bb-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./bb-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • Beagle xM: v3.16.0-armv7-x4 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
  • 2014-06-05
    • Beagle/Beagle xM: v3.14.5-armv7-x8 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
6babb57043cf8f611db9d7e5957be711  bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./bbxm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • Black: NOTE: You'll need to hold the BOOT button on powerup...
  • 2014-06-05
    • BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
f925d35517b3938e67d9108f6abd3c4b  bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz bone-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./bone-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-08-13
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  • 2014-06-05
    • OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
4ce216650b5a773ea84ea7d9ea239d88  omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.6-console-armhf-2014-08-13-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone59

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install "special" Kernel

cd /opt/scripts/tools
git pull
sudo ./update_kernel.sh --kernel v3.15.8-bone6

Build SGX modules/userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v3.15 -b tmp-sgx
./build_kernel.sh
./sgx_build_modules.sh

Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.01.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

SGX Demos

cd /opt/gfxsdkdemos/ogles2/
./OGLES2ChameleonMan

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade