Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
(Beagleboard: Install Latest Kernel)
m (SGX BeagleBone/BeagleBone Black)
(131 intermediate revisions by 9 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** Kernel Tree's
 
** Kernel Tree's
*** [https://github.com/RobertCNelson/stable-kernel Stable Kernel 2.6.39 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/3.0-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 23: Line 21:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 37: Line 52:
 
  + Desktop environment (GNOME) : ~2.9GB
 
  + Desktop environment (GNOME) : ~2.9GB
  
== Debian Squeeze ==
+
== Debian Wheezy ==
  
  git clone git://github.com/RobertCNelson/netinstall.git
+
Quick Install script for "board"
cd netinstall
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
  
Install script for Beagle Bx
+
So For the BeagleBoard xM:
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_bx --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
 
 
Install script for Beagle Cx
 
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_cx --distro squeeze
 
 
 
Install script for Beagle xM A/B/C
 
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro squeeze
 
 
 
Install script for BeagleBone A2/A3
 
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot bone --distro squeeze
 
 
 
Install script for Panda
 
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot panda --distro squeeze
 
  
 
*Options:
 
*Options:
**--uboot : beagle, panda, bone
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
  
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
+
= Demo Image =
  
==Beagleboard: NetInstall==
+
== Debian Stable (wheezy)  ==
  
Choose a language
+
Default username/password:
  C - No localization
+
*username: debian
  English - English
+
*password: temppwd
  
Configure the network:
+
Image Updated:
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
*2014-10-29
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
  eth0: Ethernet <- Your usb-ethernet device
+
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
+
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  
===usb0 howto===
+
Services Active:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
  
Configuring usb0 network bridge for 2.6.29:
+
Default user: debian pass: temppwd
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
 
  # ifconfig ethX 0.0.0.0
 
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Get prebuilt image:
 +
  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.7-console-armhf-2014-10-29.tar.xz
  
  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Verify Image with:
  Logical Volume Manager not available: <Continue>
+
  md5sum debian-7.7-console-armhf-2014-10-29.tar.xz
 +
81f8a0ac3b44937cf0baefa82100ff27  debian-7.7-console-armhf-2014-10-29.tar.xz
  
  Partition disks:
+
Unpack Image:
  Guided - Use the largest continuous free space
+
  tar xf debian-7.7-console-armhf-2014-10-29.tar.xz
 +
cd debian-7.7-console-armhf-2014-10-29
  
Partitioning scheme....
+
Install Image:
  
Example:
+
Quick install script for [board]
  MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
No installable kernel was found in the defined APT sources? :  
+
board options:
  Continue without installing a kernel? : <yes>
+
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
  
  Standard System
+
So for the BeagleBoard xM:
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
No BootLoader: <ok>
+
Advanced: Build Image:
  
==Beagleboard: Install Latest Kernel==
+
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
  
Script File:
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2014.10 -b tmp
  
Lenny:
+
Stable:
wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
 
sudo /bin/bash install-me.sh
 
 
Squeeze:
 
export DIST=squeeze
 
export ARCH=armel
 
 
Beagle/Panda
 
export BOARD=omap
 
 
BeagleBone
 
export BOARD=omap-psp
 
 
wget http://rcn-ee.net/deb/${DIST}-${ARCH}/LATEST-${BOARD}
 
wget $(cat ./LATEST-${BOARD} | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new Kernel
+
./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
  
= Debian armhf port =
+
Testing:
  
The armhf port of Debian is still only on the ports server, it hasn't been merged to main..
+
./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
  
Port Details: http://wiki.debian.org/ArmHardFloatPort
+
== Debian Testing (jessie) ==
Status: http://wiki.debian.org/ArmHardFloatTodo
 
 
 
== armhf Demo Image ==
 
  
 
Image Updated:
 
Image Updated:
*Dec 7: Switched image to sid vs ports/unstable..
+
*2014-10-29
 
+
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
Services Active:
+
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
Note: Depending on your internal network these may work out the box
+
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
SSH, Port 22: ssh ubuntu@omap
+
*2014-08-13
Getty, Serial Port
+
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
 
+
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
Default user: debian pass: temppwd
+
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
 
+
*2014-07-06
Default root user: root pass: root
+
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-10-29.tar.xz
  
wget http://rcn-ee.net/deb/rootfs/sid/sid-minimal-armhf-2011-12-07.tar.xz
+
Verify Image with:
mirrors (will take some time to update):
+
  md5sum debian-jessie-console-armhf-2014-10-29.tar.xz
wget http://ynezz.ibawizard.net/beagleboard/sid/sid-minimal-armhf-2011-12-07.tar.xz
+
  d395f81a1044400ba07cec60e86d4262 debian-jessie-console-armhf-2014-10-29.tar.xz
 
 
Verify Image with:  
 
  md5sum sid-minimal-armhf-2011-12-07.tar.xz
 
  02aad3c6148ed7936bf755140be80b45 sid-minimal-armhf-2011-12-07.tar.xz
 
  
Unpack Image:
+
Unpack image:
  tar xJf sid-minimal-armhf-2011-12-07.tar.xz
+
  tar xf debian-jessie-console-armhf-2014-10-29.tar.xz
  cd sid-minimal-armhf-2011-12-07
+
  cd debian-jessie-console-armhf-2014-10-29
  
Install Image:
+
Then follow the directions shown above with the other images...
  
Quick Install script for Beagle Bx
+
= Flasher =
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_bx
 
  
Quick Install script for Beagle Cx
+
== eMMC: BeagleBone Black ==
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_cx
 
  
Quick Install script for Beagle xM A/B/C
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
 
  
Quick Install script for BeagleBone A2/A3
+
Script for reference: (this is the script that writes to the eMMC)
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Quick Install script for Panda
+
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot panda
 
  
*Additional Options
+
Notes:
** --rootfs <ext4 default>
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
** --swap_file <swap file size in MB's>
+
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
** --addon pico <ti pico projector>
+
** (error -84: which may mean you've reached the max number of erase/write cycles...)
** --addon ulcd <CircuitCo 7 inch lcd>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
Bugs:
+
User: debian
*do NOT run update-initramfs and update the boot uInitrd, as location of ld-linux.so.3 gets moved.. but is known and patched, it'll just take awhile to get rebuilt. So the next update of this image should have it..
+
pass: temppwd
  
== rootstock for armhf ==
+
Image Updated:
 +
*2014-10-29
 +
** BeagleBone Black: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** BeagleBone Black: v3.8.13-bone63 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** BeagleBone Black: v3.8.13-bone59 kernel
 +
** NOTE: You'll need to hold the BOOT button on powerup...
  
Using: https://github.com/RobertCNelson/project-rootstock
+
Get prebuilt image:
 +
wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
Must have, these options for debian armhf...
+
Verify Image with:
  --components "main" --arch armhf --mirror http://ftp.debian-ports.org/debian/
+
md5sum BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
  a704e493dd4b2b40e46cf63b41bd3ae5  BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
= Debian Configuration =
+
Follow the "standard" update procedure.
 +
http://elinux.org/Beagleboard:Updating_The_Software
  
== Serial Ports ==
+
Linux:
 +
unxz BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX
  
Lenny
+
= raw microSD img =
  
edit /etc/inittab and add:
+
== BeagleBoard (classic) ==
S:2345:respawn:/sbin/getty 115200 ttyS2
 
  
For root access over the serial port add ttyS2 to /etc/securetty
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
 +
User: debian
 +
pass: temppwd
  
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Squeeze
+
Image Updated:
 +
*2014-10-29
 +
** Beagle: v3.17.1-armv7-x3 kernel
 +
*2014-08-13
 +
** Beagle: v3.16.0-armv7-x4 kernel
  
edit /etc/inittab and add:
+
Get prebuilt image:
  S:2345:respawn:/sbin/getty 115200 ttyO2
+
  wget https://rcn-ee.net/deb/microsd/wheezy/bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
== WiFi ==
+
Verify Image with:
 +
md5sum bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
750d02babacae353aae7ae143bd99441  bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Linux:
 +
unxz bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
sudo dd if=./bb-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX
  
== SGX Video Acceleration ==
+
== BeagleBoard xM ==
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  https://github.com/RobertCNelson/stable-kernel
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
User: debian
 +
pass: temppwd
  
=== SDK unPackage Script ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Download the latest version of the "create_sgx_package.sh" script
+
Image Updated:
2.6.37
+
*2014-10-29
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package_2.6.37.sh
+
** Beagle xM: v3.17.1-armv7-x3 kernel
2.6.38+
+
*2014-08-13
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package.sh
+
** Beagle xM: v3.16.0-armv7-x4 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** Beagle xM: v3.15.3-armv7-x4 kernel
  
Make script executable
+
Get prebuilt image:
  chmod a+x ./create_sgx_package.sh
+
  wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
Run script
+
Verify Image with:
  ./create_sgx_package.sh
+
  md5sum bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
0016b44de68b8a0cdce880dd48e3399e  bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
After Successfully running:
+
Linux:
 +
unxz bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
sudo dd if=./bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX
  
:~/temp$ ls
+
== BeagleBone/BeagleBone Black ==
create_sgx_package.sh
 
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
 
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
User: debian
./install-SGX.sh (copies necessary SGX libs and startup script)
+
pass: temppwd
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
Auto partition resize:
  Stopping PVR
+
  cd /opt/scripts/tools
  Starting PVR
+
  git pull
  Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
+
  ./grow_partition.sh
 
 
Reboot for good measure
 
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Image Updated:
 +
*2014-10-29
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
 +
** Black: NOTE: You'll need to hold the BOOT button on powerup...
  
  tar xf GFX_Linux_SDK.tar.gz
+
Get prebuilt image:
cd GFX_Linux_SDK
+
  wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
tar xf OGLES.tar.gz
 
  
=== Test SGX with a DEMO ===
+
Verify Image with:
 +
md5sum bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
b8079657951abc2350f67797a5aeddb9  bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux:
  ./OGLESEvilSkull
+
  unxz bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
  sudo dd if=./bone-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX
  
=== Trouble Shooting ===
+
== OMAP5432 uEVM ==
  
sudo rm /etc/powervr-esrev
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
User: debian
 +
pass: temppwd
  
=== gst-dsp ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Seems to work on all Beagle's, with atleast 2.6.38+ now...
+
Image Updated:
 +
*2014-10-29
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
 +
*2014-07-06
 +
** repo now enabled (repos.rcn-ee.net/debian)
 +
** OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel
  
Requirements: 2.6-stable from launchpad or 2.6.38+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Get prebuilt image:
  https://github.com/RobertCNelson/stable-kernel
+
wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
Download the latest version of the "create_dsp_package.sh" script
+
Verify Image with:
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_dsp_package.sh
+
md5sum omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
  3ae762eaae9fc712f19273d4ab61e509  omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
  
Make script executable
+
Linux:
  chmod a+x ./create_dsp_package.sh
+
  unxz omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX
  
Package script:
+
= Debian Configuration =
./create_dsp_package.sh
 
  
Copy DSP_Install_libs.tar.gz to beagle
+
== Serial Ports ==
  
Setup network...
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
 +
T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
Extract:
+
To start a console on the USB ACM device, add the following to /etc/inittab,
  tar xf DSP_Install_libs.tar.gz
+
  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
Install
+
==Install Latest Kernel Image==
./install-DSP.sh
 
  
Build gst-dsp stuff..
+
Script:
  ./install-gst-dsp.sh
+
  cd /opt/scripts/tools
 +
git pull
  
Playbin:
+
Stable:
  sudo gst-launch playbin2 uri=file://(file)
+
  ./update_kernel.sh
  
== Xorg omapfb Drivers ==
+
Testing:
 +
./update_kernel.sh --beta-kernel
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
Custom: (has to be on rcn-ee.net)
 +
./update_kernel.sh --kernel v3.8.13-bone59
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Reboot with your new Kernel Image.
  
/etc/X11/xorg.conf:
+
== Xorg Drivers ==
Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
Script:
(II) FBDEV: driver for framebuffer: fbdev
+
cd /opt/scripts/tools/
(II) FBDEV(0): using default device
+
  git pull
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
xvinfo -display :0.0
+
BeagleBone/BeagleBone Black:
  X-Video Extension version 2.2
+
  cd /opt/scripts/tools/graphics/
screen #0
+
./ti-tilcdc.sh
  no adaptors present
 
  
=== Drivers ===
+
== SGX Drivers ==
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
=== SGX BeagleBone/BeagleBone Black ===
  
Lenny:
+
Note, these are FBDEV only, no xorg/x11/etc...
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
Squeeze/Sid:
+
Install sgx modules (3.14.x ti kernel):
  sudo apt-get install xserver-xorg-video-omap3
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
sudo update-initramfs -uk `uname -r`
  
=== xorg.conf ===
+
Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
/etc/X11/xorg.conf
+
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Section "Monitor"
+
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
    Identifier "Configured Monitor"
+
  sudo tar xfv GFX_5.01.01.01.tar.gz -C /
  EndSection
+
  cd /opt/gfxinstall/
   
+
  sudo ./sgx-install.sh
  Section "Screen"
+
  sudo reboot
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
 
 
To verify it was correctly installed, reboot and:
 
  
cat /var/log/Xorg.0.log | grep omapfb
+
Verify omaplfb & pvrsrvkm loaded
  (II) LoadModule: "omapfb"
+
  debian@arm:~$ lsmod | grep omaplfb
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
+
  omaplfb                12065 0  
(II) Module omapfb: vendor="X.Org Foundation"
+
  pvrsrvkm              178782 1 omaplfb
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
  (--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
  (**) omapfb(0):  Built-in mode "current"
 
  (==) omapfb(0): DPI set to (96, 96)
 
  (II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
SGX Demos
 +
cd /opt/gfxsdkdemos/ogles2/
 +
sudo ./OGLES2ChameleonMan
  
xvinfo -display :0.0
+
= Building Kernel =
X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
https://github.com/RobertCNelson/stable-kernel
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
Download SRC
+
== BeagleBone ==
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
Build Kernel
+
== BeagleBone Black ==
  ./build_kernel.sh
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Optional Building Deb File
+
== Panda/Panda ES ==
  ./build_deb.sh
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
 
= Upgrading from Debian 5 to Debian 6 =
 
= Upgrading from Debian 5 to Debian 6 =
  
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 +
 +
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
 +
 +
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
 +
 +
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 07:50, 30 October 2014

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.7-console-armhf-2014-10-29.tar.xz

Verify Image with:

md5sum debian-7.7-console-armhf-2014-10-29.tar.xz
81f8a0ac3b44937cf0baefa82100ff27  debian-7.7-console-armhf-2014-10-29.tar.xz

Unpack Image:

tar xf debian-7.7-console-armhf-2014-10-29.tar.xz
cd debian-7.7-console-armhf-2014-10-29

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2014.10 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle/Beagle xM: v3.15.3-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-10-29.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2014-10-29.tar.xz
d395f81a1044400ba07cec60e86d4262  debian-jessie-console-armhf-2014-10-29.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2014-10-29.tar.xz
cd debian-jessie-console-armhf-2014-10-29

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
    • (error -84: which may mean you've reached the max number of erase/write cycles...)

User: debian pass: temppwd

Image Updated:

  • 2014-10-29
    • BeagleBone Black: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • BeagleBone Black: v3.8.13-bone63 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone Black: v3.8.13-bone59 kernel
    • NOTE: You'll need to hold the BOOT button on powerup...

Get prebuilt image:

wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
a704e493dd4b2b40e46cf63b41bd3ae5  BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-10-29
    • Beagle: v3.17.1-armv7-x3 kernel
  • 2014-08-13
    • Beagle: v3.16.0-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Verify Image with:

md5sum bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
750d02babacae353aae7ae143bd99441  bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Linux:

unxz bb-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
sudo dd if=./bb-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-10-29
    • Beagle xM: v3.17.1-armv7-x3 kernel
  • 2014-08-13
    • Beagle xM: v3.16.0-armv7-x4 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • Beagle xM: v3.15.3-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
0016b44de68b8a0cdce880dd48e3399e  bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Linux:

unxz bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
sudo dd if=./bbxm-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-10-29
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • BeagleBone/BeagleBone Black: v3.8.13-bone59 kernel
    • Black: NOTE: You'll need to hold the BOOT button on powerup...

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
b8079657951abc2350f67797a5aeddb9  bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Linux:

unxz bone-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
sudo dd if=./bone-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2014-10-29
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  • 2014-07-06
    • repo now enabled (repos.rcn-ee.net/debian)
    • OMAP5432 uEVM: v3.15.3-armv7-lpae-x5 kernel

Get prebuilt image:

wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
3ae762eaae9fc712f19273d4ab61e509  omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.7-console-armhf-2014-10-29-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone59

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.01.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

SGX Demos

cd /opt/gfxsdkdemos/ogles2/
sudo ./OGLES2ChameleonMan

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade