Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Add New section....)
(Debian Testing (jessie): Fix download link)
(388 intermediate revisions by 22 users not shown)
Line 1: Line 1:
 
[[Category: Linux]]
 
[[Category: Linux]]
 
[[Category: OMAP]]
 
[[Category: OMAP]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
[[Category:Development Boards]]
 +
[[Category: BeagleBoard]]
 +
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.  For a more optimized and faster system checkout: [http://mojo.handhelds.org/ Mojo Project] (armv5el & armv6el-vfp editions).  The OMAP3530 on the Beagle Board is armv7-a. See [[BeagleBoardHandheldsMojo|Handhelds Mojo (ARM) at BeagleBoard]] (formerly known as Ubuntu (ARM)) page, too.
+
= Help =
  
= Recommended Kernel =
+
If you need any help:
So like any big document, it's hard to keep everything up to date.  So if your trying Debian/Mojo for the first time, here's what i recommend, (and it's the same thing i'm running on the build beagle.)
 
  
Considered Stable: 2.6.27-oer4 : for lenny http://www.rcn-ee.com/deb/kernel/lenny/v2.6.27-2a3408b-oer4/
+
*Kernel related help:
 +
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 +
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 +
** Kernel Tree's
 +
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Uboot: 2008-rc2 or +
+
*When asking for help, please provide some debugging information:
 +
** U-Boot Version installed on board
 +
** Kernel Version: uname -a
 +
** pastebin dmesg
 +
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
  
Currently Testing with Build Beagle: http://www.rcn-ee.com/deb/kernel/beagle/lenny/v2.6.28-401b285-oer5/
+
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
= Native Install via debian-installer (NON QEMU based) =  
+
= Recommended Beagle Software =  
Note: This install method requires an LCD+usb(keyboard,etc), and uboot 2008-rc2 (Upgrading u-boot (2.6.27's and later)) or later..
 
  
Testing First Release:
+
Mainline U-Boot:
 +
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
==PC: Format SD Card==
+
= Debian NetInstall =  
 +
 
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 25: Line 52:
 
  + Desktop environment (GNOME) : ~2.9GB
 
  + Desktop environment (GNOME) : ~2.9GB
  
Starting with an empty SD card and using gparted, create:
+
== Debian Wheezy ==
  50 MiB Primary Partition, fat32
+
 
  Leave remaining space for the Debian-Installer
+
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
 +
 
 +
So For the BeagleBoard xM:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
 +
 
 +
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
 +
 
 +
= Demo Image =
 +
 
 +
== Debian Stable (wheezy)  ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
  Getty, Serial Port
  
==PC: Setup SD uboot Partition==
+
Default user: debian pass: temppwd
  
Mount your SD card fat32 partition. (/media/disk/)
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-01-06/debian-7.7-console-armhf-2015-01-06.tar.xz
  
cd /media/disk/
+
Verify Image with:
  wget http://www.rcn-ee.com/deb/kernel/CC-v2.6.27-2a3408b-oer4
+
  md5sum debian-7.7-console-armhf-2015-01-06.tar.xz
  wget http://ftp.nl.debian.org/debian/dists/testing/main/installer-armel/current/images/versatile/netboot/initrd.gz
+
  154933d2414f0b1a5dd82672eb015f7d  debian-7.7-console-armhf-2015-01-06.tar.xz
mv CC-v2.6.27-2a3408b-oer4 uImage
 
gzip -d initrd.gz
 
dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
  
---- Does this have been test? The initrd.gz is invalid ramdisk file ....
+
Unpack Image:
-- This should really be under discussion, please delete (question and my answer) after posting to beagleboard mailing list. What error are you getting? This was originally written and tested in mid November, files haven't changed since thenThe 'initrd.gz' linked contains the debian-installer ramdisk image, however it must be modified to correctly work on the beagleboard's uboot. Hence the 'gzip -d' to uncompress it and the 'dd', to pad it to specific memory size. (uboot 2008-10-rc1 or 2008-10 editions along with the specific uboot strings listed in the next session are required to successfully use the 'debian-installer') RCN
+
tar xf debian-7.7-console-armhf-2015-01-06.tar.xz
 +
  cd debian-7.7-console-armhf-2015-01-06
  
==Beagleboard==
+
Install Image:
  
Mount SD card
+
Quick install script for [board]
  setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
setenv bootargs 'console=ttyS2,115200n8 console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M video=omapfb:mode:1280x720@60'
 
saveenv
 
boot
 
  
The debian-installer should load via the framebuffer, if the screen remains blank, try different resolutions for the bootargs:
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
 +
*BeagleBoard-X15            - am57xx-beagle-x15
  
video=omapfb:mode:1280x720@60
+
So for the BeagleBoard xM:
Modes:
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  "640x480@60""800x600@60""1024x768@60""1280x720@60"480p60""576p50""720p50""720p60""1080p24""1080p25""1080p30",
 
  
Continue the install without loading kernel modules? : <yes>
+
Advanced: Build Image:
  
DON'T Select "Guided - use entire disk" <- Loose the fat boot partition.
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2015.01 -b tmp
  
Recommended: Select Guided - Use the largest continuous free space
+
Stable:
  
Example:
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
  Partition #2 of SCSI1 (0,0,0) (sda) as ext3
 
Partition #5 of SCSI1 (0,0,0) (sda) as swap
 
  
Continue without installing a kernel? : <yes>
+
Testing:
  
  Standard System
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
  
No BootLoader: <ok>
+
== Debian Testing (jessie) ==
  
==Install complete==
+
Image Updated:
Reboot (aka remove power)
+
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  
Uboot update bootcmd & bootargs
+
Get prebuilt image:
  setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
  wget https://rcn-ee.net/rootfs/2015-01-06/debian-jessie-console-armhf-2015-01-06.tar.xz
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:mode:1280x720@60'
 
saveenv
 
boot
 
  
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+
Verify Image with:
 +
md5sum debian-jessie-console-armhf-2015-01-06.tar.xz
 +
e10f3572ab6ee0a3d8ced1d82b21698c  debian-jessie-console-armhf-2015-01-06.tar.xz
  
==Login & Install kernel-image==
+
Unpack image:
 +
tar xf debian-jessie-console-armhf-2015-01-06.tar.xz
 +
cd debian-jessie-console-armhf-2015-01-06
  
cd /home/<user>
+
Then follow the directions shown above with the other images...
sudo apt-get install uboot-mkimage
 
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-image-2.6.27-oer4_1.0lenny_armel.deb
 
sudo dpkg -i linux-image*
 
  
Extract linux-image's vmlinuz-*
+
= Flasher =
dpkg -x linux-image* ./temp
 
  
Mount fat32 partition
+
== eMMC: BeagleBone Black ==
sudo mount /dev/mmcblk0p1 /mnt
 
  
Build uboot compatible image and copy to fat32 boot partition
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
sudo mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-* /mnt/uImage
 
  
Clean up
+
Script for reference: (this is the script that writes to the eMMC)
  rm -rfd temp
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Sync, umount Partitions and Reboot
+
This script will only take about 5-6 Minutes after power on.
  
= QEMU install method via debian-installer (emulated arm core via Desktop PC)=
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
+
User: debian
apt-get install qemu
+
pass: temppwd
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
 
  
==PC: Format SD Card==
+
Image Updated:
 +
*2015-01-06
 +
** BeagleBone Black: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** BeagleBone Black: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** BeagleBone Black: v3.8.13-bone63 kernel
  
You will need a 1GB SD card or greater.
+
Get prebuilt image:
  Standard System : ~455MB
+
wget https://rcn-ee.net/rootfs/2015-01-06/flasher/BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  + Desktop environment (GNOME) : ~2.9GB
+
 
 +
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
22da3f70e965d1c0c5714eda41b464fe  BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
 
 +
Follow the "standard" update procedure.
 +
http://elinux.org/Beagleboard:Updating_The_Software
 +
 
 +
Linux:
 +
unxz BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX
 +
 
 +
= raw microSD img =
 +
 
 +
== BeagleBoard (classic) ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
  git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2015-01-06
 +
** Beagle: v3.18.1-armv7-x2 kernel
 +
*2014-10-29
 +
** Beagle: v3.17.1-armv7-x3 kernel
 +
*2014-08-13
 +
** Beagle: v3.16.0-armv7-x4 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
 
 +
Verify Image with:
 +
md5sum bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
6b5a78bfb982bf42ec0a8de3860e8861  bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
 
 +
Linux:
 +
unxz bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
sudo dd if=./bb-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX
 +
 
 +
== BeagleBoard xM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
Starting with an empty SD card and using gparted, create:
+
User: debian
50 MiB Primary Partition, fat32
+
pass: temppwd
Leave remaining space for the Debian-Installer
 
  
==PC: Preparation==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Create a working directory to keep your files organized.
+
Image Updated:
 +
*2015-01-06
 +
** Beagle xM: v3.18.1-armv7-x2 kernel
 +
*2014-10-29
 +
** Beagle xM: v3.17.1-armv7-x3 kernel
 +
*2014-08-13
 +
** Beagle xM: v3.16.0-armv7-x4 kernel
  
mkdir debian-armel
+
Get prebuilt image:
cd debian-armel/
+
  wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.26-1-versatile
 
  
==PC: Install Debian in QEMU==
+
Verify Image with:
 +
md5sum bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
1731e386efb7178bca955b3cb0a231df  bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  
Quick Note: Debian Lenny is undergoing Beta/RC testing so these debian installers are currently way out of date, so it will tell you their are unavailable kernel modules, just ignore the question and continue. These modules will be provided later, with the provided linux-image deb.
+
Linux:
 +
unxz bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
sudo dd if=./bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX
  
To install (ARM EABI) Debian inside QEMU:
+
== BeagleBone/BeagleBone Black ==
  
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-1-versatile -initrd initrd.gz -m 256 -hda /dev/sdX -append "root=/dev/ram mem=256M"
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
Note: root/sudo access is required to access /dev/sdX directly (verify mmc card with fdisk -l)
 
  
Partition disks, default settings should work for most: Guided - use the largest continuous free space
+
User: debian
 +
pass: temppwd
  
[[Image:Beagleboarddebian-partitiondisk.png]]
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
==PC: Running Debian in QEMU (Optional)==
+
Image Updated:
Note: This section is only useful for people with out a usb-network device for their beagle who would like to install additional applications, otherwise just skip to the next subsection to install your linux-kernel by copying files from your desktop pc to a SD card.
+
*2015-01-06
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
  
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-1-versatile -m 256 -hda /dev/sdX -append "root=/dev/sda2 mem=256M"
+
Get prebuilt image:
 +
  wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  
Note: Time will be incorrect.  
+
Verify Image with:
 +
md5sum bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
356935bd88bd07efcf51f21747370fdf  bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  
  sudo apt-get install ntpdate
+
Linux:
  ntpdate pool.ntp.org
+
  unxz bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
  sudo dd if=./bone-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX
  
Install default deb packages for linux-image & linux-headers.
+
== OMAP5432 uEVM ==
  
Stable  2.6.27
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-image-2.6.27-oer4_1.0lenny_armel.deb
 
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-headers-2.6.27-oer4_1.0lenny_armel.deb
 
sudo dpkg -i *.deb
 
  
Note: It's easier to download these straight to the sd card after you've mounted the SD card to copy uImage to the FAT partition.
+
User: debian
 +
pass: temppwd
  
==PC: Linux Kernel Preparation ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Install uboot-mkimage utility
+
Image Updated:
sudo apt-get install uboot-mkimage
+
*2015-01-06
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
 +
*2014-08-13
 +
** OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel
  
Remount SD card, Ubuntu remounts SD card like this:
+
Get prebuilt image:
  /media/disk/ <fat32>
+
  wget https://rcn-ee.net/rootfs/2015-01-06/microsd/omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
/media/disk-1/ <ext3>
 
  
Download Kernel-Image
+
Verify Image with:
  cd /media/disk-1/home/<user>/
+
  md5sum omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-image-2.6.27-oer4_1.0lenny_armel.deb
+
75740006472f50d168474e829a5d05ac  omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  
Extract linux-image's vmlinuz-*
+
Linux:
  dpkg -x linux-image* ./temp
+
unxz omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
 +
  sudo dd if=./omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX
  
Build uboot compatiable image and copy to /media/disk/ <fat32 boot partition>
+
== BeagleBoard-X15 ==
mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-*  /media/disk/uImage
 
  
Clean up
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
rm -rfd temp
 
  
Sync, umount Partitions and Install sd card in beagleboard
+
User: debian
 +
pass: temppwd
  
=Beagleboard First Boot, uboot, general notes=
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Insert SD Card and power up Beagleboard.
+
Image Updated:
 +
*2015-01-06
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
  
==Boot==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  
Using a terminal program, stop u-boot and add these commands:
+
Verify Image with:
  setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
  md5sum bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:mode:1280x720@60'
+
  b7823881e05cec0c3494cfefefda6845 bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  saveenv
 
  boot
 
  
video=omapfb:mode:1280x720@60
+
Linux:
  Modes:
+
  unxz bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
  "640x480@60""800x600@60""1024x768@60""1280x720@60"480p60""576p50""720p50""720p60""1080p24""1080p25""1080p30",
+
  sudo dd if=./bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX
  
The Beagleboard will reboot 3-4 times while the ext3 filesystem is repaired. (may have to remove power etc)
+
= Debian Configuration =
  
=== Upgrading u-boot (2.6.27's and later) ===
+
== Serial Ports ==
  
Using gparted, create a new 50MB Primary fat32 Parition on blank SD card.
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
 +
T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
wget http://www.angstrom-distribution.org/demo/beagleboard/u-boot.bin
+
To start a console on the USB ACM device, add the following to /etc/inittab,
  cp u-boot.bin /media/disk
+
  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
uboot
+
==Install Latest Kernel Image==
mmcinit
 
fatload mmc 0 0x80200000 u-boot.bin
 
nand unlock
 
nand ecc sw
 
nand erase 80000 160000
 
nand write.i 0x80200000 80000 160000
 
reset
 
  
==Debian on Beagleboard==
+
Script:
 +
cd /opt/scripts/tools
 +
git pull
  
Debian on BeagleBoard uses the following configuration:
+
Stable:
 +
./update_kernel.sh
  
* Console log = Serial Terminal
+
Testing:
* User Console = HDMI port + usb (keyboard, mouse, etc)
+
./update_kernel.sh --beta-kernel
  
If you want to log in with the serial port, you will have to add to /etc/inittab
+
Custom: (has to be on rcn-ee.net)
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
./update_kernel.sh --kernel v3.8.13-bone69
  
And if you want to log in as root on the serial port, add ttyS2 to /etc/securetty.
+
Reboot with your new Kernel Image.
  
===Xorg===
+
== Xorg Drivers ==
Modify /etc/X11/xorg.conf
 
Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
[[Image:Beagleboarddebian-GNOME.jpg]]
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
Note: 'fbdev' is normally *slow* since it completely relies on the system cpu to update the framebuffer. Once the video processing core's driver is released this will no longer be an issue.
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
=Current Issues=
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
+
== SGX Drivers ==
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue date MMDDHHMMYYYY
 
  
=Advanced: Building a Native Debian Kernel=
+
=== SGX BeagleBone/BeagleBone Black ===
  
Note, these are just general build hints.
+
Note, these are FBDEV only, no xorg/x11/etc...
  
==Install Dependencies==
+
Install sgx modules (3.14.x ti kernel):
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
  apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev
+
sudo depmod -a `uname -r`
 +
sudo update-initramfs -uk `uname -r`
  
==u-boot==
+
Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
There is a debian package for this now:
+
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
  apt-get install uboot-mkimage
+
  sudo tar xfv GFX_5.01.01.01.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
If you must build from upstream:
+
Verify omaplfb & pvrsrvkm loaded
  wget -nc http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
+
  debian@arm:~$ lsmod | grep omaplfb
  tar -xf u-boot_beagle_revb.tar.gz
+
  omaplfb                12065 0
  cd u-boot/
+
  pvrsrvkm              178782 1 omaplfb
  make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3530beagle_config
 
  make CROSS_COMPILE= tools
 
  
Add /tools/ to $PATH
+
SGX Demos
  PATH=/home/<user>/u-boot/tools:"${PATH}"
+
  cd /opt/gfxsdkdemos/ogles2/
 +
sudo ./OGLES2ChameleonMan
  
==Linux Kernel==
+
= Building Kernel =
  
git clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
cd linux-omap-2.6/
 
git checkout -b beagle <tag you wish to use>
 
  
Patch Kernel with patches you need:
+
== Beagle/Beagle xM ==
  patch -p1 < ~/dl/patches/*.patch
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
Setup Kernel .config
+
== BeagleBone ==
  make CROSS_COMPILE= distclean
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
Copy or Make your defconfig
+
== BeagleBone Black ==
  cp ~/dl/defconfig .config
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
or
 
make CROSS_COMPILE= menuconfig
 
  
Create Debian linux-image* & linux-headers* Package
+
== Panda/Panda ES ==
  make-kpkg --cross_compile - clean
+
  http://eewiki.net/display/linuxonarm/PandaBoard
fakeroot make-kpkg --cross_compile - kernel_image kernel_headers
 
  
Create U-boot uImage
+
= Upgrading from Debian 5 to Debian 6 =
make CROSS_COMPILE= uImage
 
  
= Deb Builder =
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
  
Auto builds for lenny, sid, and mojo's; linux-image and linux-headers's in appropriate schroot's.
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
  
[http://www.rcn-ee.com/deb/kernel/  Latest Images]
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
[http://www.rcn-ee.com/deb/kernel/changes.txt  Changelog]
 
  
= Rebuild Kernel from Source =
+
sudo apt-get update ; sudo apt-get upgrade
... to be filled in...
+
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 22:35, 14 January 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/debian-7.7-console-armhf-2015-01-06.tar.xz

Verify Image with:

md5sum debian-7.7-console-armhf-2015-01-06.tar.xz
154933d2414f0b1a5dd82672eb015f7d  debian-7.7-console-armhf-2015-01-06.tar.xz

Unpack Image:

tar xf debian-7.7-console-armhf-2015-01-06.tar.xz
cd debian-7.7-console-armhf-2015-01-06

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.01 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • Beagle/Beagle xM: v3.16.0-armv7-x4 kernel
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/debian-jessie-console-armhf-2015-01-06.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2015-01-06.tar.xz
e10f3572ab6ee0a3d8ced1d82b21698c  debian-jessie-console-armhf-2015-01-06.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2015-01-06.tar.xz
cd debian-jessie-console-armhf-2015-01-06

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-01-06
    • BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone Black: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • BeagleBone Black: v3.8.13-bone63 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/flasher/BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
22da3f70e965d1c0c5714eda41b464fe  BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-01-06
    • Beagle: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle: v3.17.1-armv7-x3 kernel
  • 2014-08-13
    • Beagle: v3.16.0-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Verify Image with:

md5sum bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
6b5a78bfb982bf42ec0a8de3860e8861  bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Linux:

unxz bb-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
sudo dd if=./bb-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-01-06
    • Beagle xM: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle xM: v3.17.1-armv7-x3 kernel
  • 2014-08-13
    • Beagle xM: v3.16.0-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
1731e386efb7178bca955b3cb0a231df  bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Linux:

unxz bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
sudo dd if=./bbxm-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-01-06
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • BeagleBone/BeagleBone Black: v3.8.13-bone63 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
356935bd88bd07efcf51f21747370fdf  bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Linux:

unxz bone-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
sudo dd if=./bone-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-01-06
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  • 2014-08-13
    • OMAP5432 uEVM: v3.16.0-armv7-lpae-x2 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/microsd/omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
75740006472f50d168474e829a5d05ac  omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-01-06
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-01-06/microsd/bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Verify Image with:

md5sum bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
b7823881e05cec0c3494cfefefda6845  bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz

Linux:

unxz bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img.xz
sudo dd if=./bbx15-debian-7.7-console-armhf-2015-01-06-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.01.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

SGX Demos

cd /opt/gfxsdkdemos/ogles2/
sudo ./OGLES2ChameleonMan

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade