Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (gst-dsp: add script for 3.4.x)
m (Help: grocer's apostrophe's)
(121 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel Stable Kernel 2.6.39 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/3.0-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 23: Line 21:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 37: Line 52:
 
  + Desktop environment (GNOME) : ~2.9GB
 
  + Desktop environment (GNOME) : ~2.9GB
  
== Debian Squeeze ==
+
== Debian Wheezy ==
 
 
git clone git://github.com/RobertCNelson/netinstall.git
 
cd netinstall
 
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
 
 
"board" Options:
 
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx    - beagle_cx
 
*BeagleBoard xMA/B/C    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax - panda
 
*PandaBoard ES - panda_es
 
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  
 
*Options:
 
*Options:
**--uboot : beagle, panda, bone
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
  
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
 
  
==Beagleboard: NetInstall==
+
= Demo Image =
  
  Choose a language
+
== Debian Stable (wheezy) ==
  C - No localization
 
  English - English
 
  
Configure the network:
+
Default username/password:
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
*username: debian
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+
*password: temppwd
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Image Updated:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
*2015-02-19
 +
** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
  Configuring usb0 network bridge for 2.6.29:
+
Services Active:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
  Note: Depending on your internal network these may work out of the box
  # ifconfig ethX 0.0.0.0
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  # ifconfig usbX 0.0.0.0
+
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
  # brctl addbr brX
+
Getty, Serial Port
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
Continue the install without loading kernel modules? : <yes>
+
Default user: debian pass: temppwd
  
  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Get prebuilt image:
  Logical Volume Manager not available: <Continue>
+
  wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz
  
  Partition disks:
+
Verify Image with:
  Guided - Use the largest continuous free space
+
  md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
 +
82a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz
  
  Partitioning scheme....
+
Unpack Image:
 +
  tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
 +
cd debian-7.8-console-armhf-2015-02-19
  
Example:
+
Install Image:
  MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
 
  >  #1 primary  57.5 MB    fat32
+
Quick install script for [board]
  >  #2 primary  1.8 GB B f ext3  /
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  > #5 logical 148.0 MB  f swap swap
+
 
Finish partitioning and write changes to disk
+
board options:
  Write the changes to disk? : <yes>
+
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
 +
*BeagleBoard-X15            - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
  cd omap-image-builder
 +
  git checkout v2015.02 -b tmp
 +
 
 +
Stable:
 +
 
 +
  ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
 +
 
 +
Testing:
  
  No installable kernel was found in the defined APT sources? :
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
  Continue without installing a kernel? : <yes>
 
  
Standard System
+
== Debian Testing (jessie) ==
  
No BootLoader: <ok>
+
Image Updated:
 +
*2015-02-19
 +
** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
==Beagleboard: Install Latest Kernel==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz
  
Script File:
+
Verify Image with:
 +
md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
 +
957ebb617a53a662e0fe03f728e0ddcb  debian-jessie-console-armhf-2015-02-19.tar.xz
  
Lenny:
+
Unpack image:
  wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
+
  tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
sudo /bin/bash install-me.sh
+
  cd debian-jessie-console-armhf-2015-02-19
 
  Squeeze:
 
export DIST=squeeze
 
export ARCH=armel
 
 
Beagle/Panda
 
export BOARD=omap
 
 
BeagleBone
 
export BOARD=omap-psp
 
 
wget http://rcn-ee.net/deb/${DIST}-${ARCH}/LATEST-${BOARD}
 
wget $(cat ./LATEST-${BOARD} | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new Kernel
+
Then follow the directions shown above with the other images...
  
= Debian armhf port =
+
= Flasher =
  
Port Details: http://wiki.debian.org/ArmHardFloatPort
+
== eMMC: BeagleBone Black ==
  
Status: http://wiki.debian.org/ArmHardFloatTodo
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
==Demo Image==
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
=== Debian Wheezy snapshot ===
+
This script will only take about 5-6 Minutes after power on.
  
Default username/password:  
+
Notes:
*username: debian
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
*password: temppwd
+
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Default root user/password
+
User: debian
*user: root
+
pass: temppwd
*password: root
 
  
 
Image Updated:
 
Image Updated:
*June 12th: 2012-06-10
+
*2015-02-19
** Beagle/Panda: v3.2.19-x13 kernel
+
** BeagleBone Black: v3.14.33-ti-r50 kernel
** Bone: v3.2.18-psp14 kernel (now supports the BeagleBone LCD from CircuitCo)
+
*2015-01-06
*March 29th: 2012-03-29
+
** BeagleBone Black: v3.14.26-ti-r43 kernel
** Beagle/Panda: v3.2.13-x7 kernel (panda bluetooth now works "sudo apt-get install bluetooth" + "uim" to get all the userspace programs)
+
*2014-10-29
*** uim: git clone git://gitorious.org/uim/uim.git ; cd uim ; make ; sudo make install
+
** BeagleBone Black: v3.14.22-ti-r31 kernel
add: /etc/udev/rules.d/bluetooth.rules
 
ACTION=="add", SUBSYSTEM=="platform", ENV{MODALIAS}=="platform:kim", RUN+="/sbin/initctl emit enable-ti-bt"
 
** Bone: v3.2.0-psp6 kernel (for users with usb problems, still no good solution yet..)
 
*March 8th: 2012-03-08
 
**Beagle/Panda: fix serial omap regression in v3.2.9 kernel
 
*March 6th: 2012-03-06
 
**Beagle/Panda: v3.2.9 kernel
 
**fixed missing dhclient package (backport from sid)
 
*March 2nd: 2012-03-02
 
**Beagle/Panda: v3.2.7 kernel
 
*Feb 5th: 2012-02-05
 
**Beagle: v3.2.3 kernel with sgx driver fix (bug in 2012-02-03 tar file)
 
 
 
Services Active:
 
Note: Depending on your internal network these may work out the box
 
SSH, Port 22: ssh ubuntu@omap
 
Getty, Serial Port
 
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-minimal-armhf-2012-06-10.tar.xz
+
Verify Image with:
  mirrors (will take some time to update):
+
  md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  wget http://ynezz.ibawizard.net/beagleboard/wheezy/debian-wheezy-minimal-armhf-2012-06-10.tar.xz
+
  adbfa79c6748f47e81dd233f06d98b49 BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
Verify Image with:
+
Follow the "standard" update procedure.
md5sum debian-wheezy-minimal-armhf-2012-06-10.tar.xz
+
  http://elinux.org/Beagleboard:Updating_The_Software
  b98d890c9e8dba167afaaa88609a6765  debian-wheezy-minimal-armhf-2012-06-10.tar.xz
 
  
Unpack Image:
+
Linux:
  tar xJf debian-wheezy-minimal-armhf-2012-06-10.tar.xz
+
  unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  cd debian-wheezy-minimal-armhf-2012-06-10
+
  sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
Install Image:
+
= raw microSD img =
  
Quick Install script for "board"
+
== BeagleBoard (classic) ==
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
 
  
"board" Options:  
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx    - beagle_cx
 
*BeagleBoard xMA/B/C    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax - panda
 
*PandaBoard ES - panda_es
 
  
So For the BeagleBoard xM:
+
User: debian
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
pass: temppwd
  
*Additional Options
+
Auto partition resize:
** --rootfs <ext4 default>
+
cd /opt/scripts/tools
** --swap_file <swap file size in MB's>
+
git pull
** --addon pico <ti pico projector>
+
./grow_partition.sh
** --addon ulcd <CircuitCo 7 inch lcd>
+
sudo reboot
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
= Debian Configuration =
+
Image Updated:
 +
*2015-02-19
 +
** Beagle: xM: v3.19.0-armv7-x3 kernel
 +
*2015-01-06
 +
** Beagle: v3.18.1-armv7-x2 kernel
 +
*2014-10-29
 +
** Beagle: v3.17.1-armv7-x3 kernel
  
== Serial Ports ==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
Lenny
+
Verify Image with:
 +
md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
7a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
edit /etc/inittab and add:
+
Linux:
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
  unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
For root access over the serial port add ttyS2 to /etc/securetty
+
== BeagleBoard xM ==
  
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
 +
User: debian
 +
pass: temppwd
  
Squeeze
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
edit /etc/inittab and add:
+
Image Updated:
S:2345:respawn:/sbin/getty 115200 ttyO2
+
*2015-02-19
 +
** Beagle xM: v3.19.0-armv7-x3 kernel
 +
*2015-01-06
 +
** Beagle xM: v3.18.1-armv7-x2 kernel
 +
*2014-10-29
 +
** Beagle xM: v3.17.1-armv7-x3 kernel
  
== WiFi ==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Verify Image with:
 +
md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
== SGX Video Acceleration ==
+
Linux:
 +
unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
== BeagleBone/BeagleBone Black ==
  https://github.com/RobertCNelson/stable-kernel
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
=== SDK unPackage Script ===
+
User: debian
 +
pass: temppwd
  
Download the latest version of the "create_sgx_package.sh" script
+
Auto partition resize:
2.6.37
+
  cd /opt/scripts/tools
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package_2.6.37.sh
+
  git pull
  2.6.38+
+
  ./grow_partition.sh
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package.sh
+
sudo reboot
  
Make script executable
+
Image Updated:
chmod a+x ./create_sgx_package.sh
+
*2015-02-19
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
  
Run script
+
Get prebuilt image:
  ./create_sgx_package.sh
+
  wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
After Successfully running:
+
Verify Image with:
 +
md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
9fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
:~/temp$ ls
+
Linux:
  create_sgx_package.sh
+
  unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
== OMAP5432 uEVM ==
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
User: debian
Stopping PVR
+
pass: temppwd
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Image Updated:
 +
*2015-02-19
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
  tar xf GFX_Linux_SDK.tar.gz
+
Get prebuilt image:
cd GFX_Linux_SDK
+
  wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
tar xf OGLES.tar.gz
 
  
=== Test SGX with a DEMO ===
+
Verify Image with:
 +
md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux:
  ./OGLESEvilSkull
+
  unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
  sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
=== Trouble Shooting ===
+
== BeagleBoard-X15 ==
  
sudo rm /etc/powervr-esrev
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
User: debian
 +
pass: temppwd
  
=== gst-dsp ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Seems to work on all Beagle's, with atleast 2.6.38+ now...
+
Image Updated:
 +
*2015-02-19
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
  
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
Requirements: stable-kernel or 2.6.38+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Verify Image with:
  https://github.com/RobertCNelson/stable-kernel
+
md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
32c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
Download the latest version of the "create_dsp_package.sh" script
+
Linux:
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_dsp_package.sh
+
unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
  sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
for 3.4.x+
+
= Debian Configuration =
wget https://raw.github.com/RobertCNelson/stable-kernel/v3.4.x/create_dsp_package.sh
 
  
Make script executable
+
== Serial Ports ==
chmod a+x ./create_dsp_package.sh
 
  
Package script:
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
  ./create_dsp_package.sh
+
  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
Copy DSP_Install_libs.tar.gz to beagle
+
To start a console on the USB ACM device, add the following to /etc/inittab,
 +
GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
Setup network...
+
==Install Latest Kernel Image==
  
Extract:
+
Script:
  tar xf DSP_Install_libs.tar.gz
+
  cd /opt/scripts/tools
 +
git pull
  
Install
+
Stable:
  ./install-DSP.sh
+
  ./update_kernel.sh
  
Build gst-dsp stuff..
+
Testing:
  ./install-gst-dsp.sh
+
  ./update_kernel.sh --beta-kernel
  
Playbin:
+
Custom: (has to be on rcn-ee.net)
  sudo gst-launch playbin2 uri=file://(file)
+
  ./update_kernel.sh --kernel v3.8.13-bone69
  
== Xorg omapfb Drivers ==
+
Reboot with your new Kernel Image.
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Xorg Drivers ==
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
/etc/X11/xorg.conf:
+
BeagleBoard/PandaBoard:
  Section "Device"
+
  cd /opt/scripts/tools/graphics/
Identifier "Configured Video Device"
+
  ./ti-omapdrm.sh
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
BeagleBone/BeagleBone Black:
(II) FBDEV: driver for framebuffer: fbdev
+
  cd /opt/scripts/tools/graphics/
  (II) FBDEV(0): using default device
+
  ./ti-tilcdc.sh
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== SGX Drivers ==
  
xvinfo -display :0.0
+
=== SGX BeagleBone/BeagleBone Black ===
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
Install sgx modules (3.14.x ti kernel):
 +
sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
  sudo update-initramfs -uk `uname -r`
  
Lenny:
+
Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Squeeze/Sid:
+
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
  sudo apt-get install xserver-xorg-video-omap3
+
sudo tar xfv GFX_5.01.01.01.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
  sudo ./sgx-install.sh
 +
sudo reboot
  
=== xorg.conf ===
+
Verify omaplfb & pvrsrvkm loaded
/etc/X11/xorg.conf
+
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
Section "Monitor"
+
SGX Demos
    Identifier "Configured Monitor"
+
  cd /opt/gfxsdkdemos/ogles2/
EndSection
+
  sudo ./OGLES2ChameleonMan
 
Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
  EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
= Building Kernel =
  
cat /var/log/Xorg.0.log | grep omapfb
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
xvinfo -display :0.0
+
== BeagleBone ==
  X-Video Extension version 2.2
+
  http://eewiki.net/display/linuxonarm/BeagleBone
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
https://github.com/RobertCNelson/stable-kernel
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
Download SRC
+
= Upgrading from Debian 5 to Debian 6 =
git clone git://github.com/RobertCNelson/stable-kernel.git
 
  
Build Kernel
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
./build_kernel.sh
 
  
Optional Building Deb File
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
./build_deb.sh
 
  
= Upgrading from Debian 5 to Debian 6 =
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
  
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
+
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 17:42, 22 February 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port


Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-02-19
    • Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz

Verify Image with:

md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
82a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz

Unpack Image:

tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
cd debian-7.8-console-armhf-2015-02-19

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.02 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2015-02-19
    • Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
957ebb617a53a662e0fe03f728e0ddcb  debian-jessie-console-armhf-2015-02-19.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
cd debian-jessie-console-armhf-2015-02-19

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-02-19
    • BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
adbfa79c6748f47e81dd233f06d98b49  BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • Beagle: xM: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle: v3.17.1-armv7-x3 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
7a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • Beagle xM: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle xM: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle xM: v3.17.1-armv7-x3 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
9fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
32c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.01.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

SGX Demos

cd /opt/gfxsdkdemos/ogles2/
sudo ./OGLES2ChameleonMan

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade