Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Debian Configuration: add armhf demo image)
m (Help: grocer's apostrophe's)
(148 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel Stable Kernel 2.6.39 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/3.0-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 23: Line 21:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 37: Line 52:
 
  + Desktop environment (GNOME) : ~2.9GB
 
  + Desktop environment (GNOME) : ~2.9GB
  
== Debian Squeeze ==
+
== Debian Wheezy ==
 
 
git clone git://github.com/RobertCNelson/netinstall.git
 
cd netinstall
 
  
Install script for Beagle Bx
+
Quick Install script for "board"
  ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_bx --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
  
Install script for Beagle Cx, xM A/B/C
+
So For the BeagleBoard xM:
  ./mk_mmc.sh --mmc /dev/sdX --uboot beagle --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
 
 
Install script for Panda
 
./mk_mmc.sh --mmc /dev/sdX --uboot panda --distro squeeze
 
  
 
*Options:
 
*Options:
**--uboot : beagle, (panda only serial, display not working)
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
**--usb-rootfs : (uImage on /dev/mmcblkp0 and rootfs on external usb drive /dev/sda1)
 
  
Note: The default options work for most people, but if you'd like to tweak boot settings, edit these before running the script.
 
 
NetInstall boot Settings:
 
gedit ./netinstall/scripts/dvi.cmd
 
gedit ./netinstall/scripts/serial.cmd
 
 
Normal Boot Settings:
 
gedit ./netinstall/scripts/dvi-normal-squeeze.cmd
 
gedit ./netinstall/scripts/serial-normal-squeeze.cmd
 
  
==Beagleboard: NetInstall==
+
= Demo Image =
  
  Choose a language
+
== Debian Stable (wheezy) ==
  C - No localization
 
  English - English
 
  
Configure the network:
+
Default username/password:
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
*username: debian
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+
*password: temppwd
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Image Updated:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
*2015-02-19
 +
** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
  Configuring usb0 network bridge for 2.6.29:
+
Services Active:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
  Note: Depending on your internal network these may work out of the box
  # ifconfig ethX 0.0.0.0
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  # ifconfig usbX 0.0.0.0
+
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
  # brctl addbr brX
+
Getty, Serial Port
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Default user: debian pass: temppwd
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz
  
  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Verify Image with:
  Logical Volume Manager not available: <Continue>
+
  md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
 +
82a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz
  
  Partition disks:
+
Unpack Image:
  Guided - Use the largest continuous free space
+
  tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
 +
cd debian-7.8-console-armhf-2015-02-19
  
Partitioning scheme....
+
Install Image:
  
Example:
+
Quick install script for [board]
  MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
No installable kernel was found in the defined APT sources? :  
+
board options:
  Continue without installing a kernel? : <yes>
+
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
 +
*BeagleBoard-X15            - am57xx-beagle-x15
  
  Standard System
+
So for the BeagleBoard xM:
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
No BootLoader: <ok>
+
Advanced: Build Image:
  
==Beagleboard: Install Latest Kernel==
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2015.02 -b tmp
  
Script File:
+
Stable:
  
  Lenny:
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.11-x13/install-me.sh
 
sudo /bin/bash install-me.sh
 
 
Squeeze:
 
export DIST=squeeze
 
wget http://rcn-ee.net/deb/${DIST}/LATEST
 
wget $(cat ./LATEST | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new Kernel
+
Testing:
  
= Debian armhf port =
+
./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
  
== armhf Demo Image ==
+
== Debian Testing (jessie) ==
  
Default user: debian pass: temppwd
+
Image Updated:
Default root user: root pass: root
+
*2015-02-19
 +
** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz
 +
 +
Verify Image with:
 +
md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
 +
957ebb617a53a662e0fe03f728e0ddcb  debian-jessie-console-armhf-2015-02-19.tar.xz
 +
 +
Unpack image:
 +
tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
 +
cd debian-jessie-console-armhf-2015-02-19
 +
 +
Then follow the directions shown above with the other images...
  
wget http://rcn-ee.net/deb/rootfs/unstable/unstable-minimal-armhf-omap-2011-07-10.tar.xz
+
= Flasher =
mirrors (will take some time to update):
 
wget http://ynezz.ibawizard.net/beagleboard/unstable/unstable-minimal-armhf-omap-2011-07-10.tar.xz
 
  
Verify Image with:  
+
== eMMC: BeagleBone Black ==
md5sum unstable-minimal-armhf-omap-2011-07-10.tar.xz
 
0f7caad69252aaf8d24c58b8241fe07c  unstable-minimal-armhf-omap-2011-07-10.tar.xz
 
  
Unpack Image:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  tar xJf unstable-minimal-armhf-omap-2011-07-10.tar.xz
+
 
  cd unstable-minimal-armhf-omap-2011-07-10
+
Script for reference: (this is the script that writes to the eMMC)
 +
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
  
Install Image:
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Quick Install script for Beagle Bx
+
User: debian
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_bx
+
pass: temppwd
  
Quick Install script for Beagle Cx, xM A/B/C
+
Image Updated:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle
+
*2015-02-19
 +
** BeagleBone Black: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBone Black: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** BeagleBone Black: v3.14.22-ti-r31 kernel
  
Quick Install script for Panda
+
Get prebuilt image:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot panda
+
  wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
*Additional Options
+
Verify Image with:
** --rootfs <ext4 default>
+
md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
** --swap_file <swap file size in MB's>
+
adbfa79c6748f47e81dd233f06d98b49  BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
** --addon <pico>
 
  
You should now be able to unmount the SD card from you PC, insert into your BeagleBoard, reboot and have Ubuntu Maverick loaded.
+
Follow the "standard" update procedure.
 +
http://elinux.org/Beagleboard:Updating_The_Software
  
Advanced: Build Image:
+
Linux:
 +
unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
fixup.sh: https://github.com/RobertCNelson/omap-image-builder/raw/master/tools/fixup.sh
+
= raw microSD img =
  
Built with rootstock trunk (ARM native mode, run directly on beagleboard):
+
== BeagleBoard (classic) ==
sudo ./rootstock --fqdn omap --imagesize 2G --dist unstable --serial ttyO2 \
 
--login debian --password temppwd \
 
--seed initramfs-tools,btrfs-tools,i2c-tools,nano,pastebinit,uboot-envtools,uboot-mkimage,usbutils,wget,wireless-tools,wpasupplicant \
 
--script fixup.sh --components "main" --arch armhf --mirror http://ftp.debian-ports.org/debian/ \
 
--kernel-image http://rcn-ee.net/deb/unstable/v2.6.39.3-x2/linux-image-2.6.39.3-x2_1.0unstable_armhf.deb
 
  
== rootstock for armhf ==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
Using: https://github.com/RobertCNelson/project-rootstock
+
User: debian
 +
pass: temppwd
  
Must have, these options for debian armhf...
+
Auto partition resize:
  --components "main" --arch armhf --mirror http://ftp.debian-ports.org/debian/
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
= Debian Configuration =
+
Image Updated:
 +
*2015-02-19
 +
** Beagle: xM: v3.19.0-armv7-x3 kernel
 +
*2015-01-06
 +
** Beagle: v3.18.1-armv7-x2 kernel
 +
*2014-10-29
 +
** Beagle: v3.17.1-armv7-x3 kernel
  
== Serial Ports ==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
Lenny
+
Verify Image with:
 +
md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
7a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
edit /etc/inittab and add:
+
Linux:
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
  unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
For root access over the serial port add ttyS2 to /etc/securetty
+
== BeagleBoard xM ==
  
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
 +
User: debian
 +
pass: temppwd
  
Squeeze
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
edit /etc/inittab and add:
+
Image Updated:
S:2345:respawn:/sbin/getty 115200 ttyO2
+
*2015-02-19
 +
** Beagle xM: v3.19.0-armv7-x3 kernel
 +
*2015-01-06
 +
** Beagle xM: v3.18.1-armv7-x2 kernel
 +
*2014-10-29
 +
** Beagle xM: v3.17.1-armv7-x3 kernel
  
== WiFi ==
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Verify Image with:
 +
md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
== SGX Video Acceleration ==
+
Linux:
 +
unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
== BeagleBone/BeagleBone Black ==
  https://github.com/RobertCNelson/stable-kernel
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
=== SDK unPackage Script ===
+
User: debian
 +
pass: temppwd
  
Download the latest version of the "create_sgx_package.sh" script
+
Auto partition resize:
2.6.37
+
  cd /opt/scripts/tools
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package_2.6.37.sh
+
  git pull
  2.6.38+
+
  ./grow_partition.sh
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package.sh
+
sudo reboot
  
Make script executable
+
Image Updated:
chmod a+x ./create_sgx_package.sh
+
*2015-02-19
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
  
Run script
+
Get prebuilt image:
  ./create_sgx_package.sh
+
  wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
After Successfully running:
+
Verify Image with:
 +
md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
9fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
:~/temp$ ls
+
Linux:
  create_sgx_package.sh
+
  unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
== OMAP5432 uEVM ==
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
User: debian
Stopping PVR
+
pass: temppwd
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Image Updated:
 +
*2015-02-19
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
  tar xf GFX_Linux_SDK.tar.gz
+
Get prebuilt image:
cd GFX_Linux_SDK
+
  wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
tar xf OGLES.tar.gz
 
  
=== Test SGX with a DEMO ===
+
Verify Image with:
 +
md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux:
  ./OGLESEvilSkull
+
  unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
  sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
=== Trouble Shooting ===
+
== BeagleBoard-X15 ==
  
sudo rm /etc/powervr-esrev
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
User: debian
 +
pass: temppwd
  
=== gst-dsp ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Seems to work on all Beagle's, with atleast 2.6.38+ now...
+
Image Updated:
 +
*2015-02-19
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
  
Requirements: 2.6-stable from launchpad or 2.6.38+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Get prebuilt image:
  https://github.com/RobertCNelson/stable-kernel
+
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
Download the latest version of the "create_dsp_package.sh" script
+
Verify Image with:
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_dsp_package.sh
+
md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
  32c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
Make script executable
+
Linux:
  chmod a+x ./create_dsp_package.sh
+
  unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
Package script:
+
= Debian Configuration =
./create_dsp_package.sh
 
  
Copy DSP_Install_libs.tar.gz to beagle
+
== Serial Ports ==
  
Setup network...
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
 +
T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
Extract:
+
To start a console on the USB ACM device, add the following to /etc/inittab,
  tar xf DSP_Install_libs.tar.gz
+
  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
Install
+
==Install Latest Kernel Image==
./install-DSP.sh
 
  
Build gst-dsp stuff..
+
Script:
  ./install-gst-dsp.sh
+
  cd /opt/scripts/tools
 +
git pull
  
Playbin:
+
Stable:
  sudo gst-launch playbin2 uri=file://(file)
+
  ./update_kernel.sh
  
== Xorg omapfb Drivers ==
+
Testing:
 +
./update_kernel.sh --beta-kernel
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
Custom: (has to be on rcn-ee.net)
 +
./update_kernel.sh --kernel v3.8.13-bone69
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Reboot with your new Kernel Image.
  
/etc/X11/xorg.conf:
+
== Xorg Drivers ==
Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
Script:
(II) FBDEV: driver for framebuffer: fbdev
+
cd /opt/scripts/tools/
(II) FBDEV(0): using default device
+
  git pull
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
xvinfo -display :0.0
+
BeagleBone/BeagleBone Black:
  X-Video Extension version 2.2
+
  cd /opt/scripts/tools/graphics/
screen #0
+
./ti-tilcdc.sh
  no adaptors present
 
  
=== Drivers ===
+
== SGX Drivers ==
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
=== SGX BeagleBone/BeagleBone Black ===
  
Lenny:
+
Note, these are FBDEV only, no xorg/x11/etc...
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
Squeeze/Sid:
+
Install sgx modules (3.14.x ti kernel):
  sudo apt-get install xserver-xorg-video-omap3
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
sudo update-initramfs -uk `uname -r`
  
=== xorg.conf ===
+
Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
/etc/X11/xorg.conf
+
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Section "Monitor"
+
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
    Identifier "Configured Monitor"
+
  sudo tar xfv GFX_5.01.01.01.tar.gz -C /
  EndSection
+
  cd /opt/gfxinstall/
   
+
  sudo ./sgx-install.sh
  Section "Screen"
+
  sudo reboot
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
cat /var/log/Xorg.0.log | grep omapfb
+
SGX Demos
(II) LoadModule: "omapfb"
+
  cd /opt/gfxsdkdemos/ogles2/
  (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
+
  sudo ./OGLES2ChameleonMan
  (II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
= Building Kernel =
  
xvinfo -display :0.0
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
https://github.com/RobertCNelson/stable-kernel
+
== BeagleBone ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone
  
Download SRC
+
== BeagleBone Black ==
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Build Kernel
+
== Panda/Panda ES ==
  ./build_kernel.sh
+
  http://eewiki.net/display/linuxonarm/PandaBoard
 
 
Optional Building Deb File
 
./build_deb.sh
 
  
 
= Upgrading from Debian 5 to Debian 6 =
 
= Upgrading from Debian 5 to Debian 6 =
  
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 +
 +
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
 +
 +
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
 +
 +
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 17:42, 22 February 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port


Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-02-19
    • Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz

Verify Image with:

md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
82a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz

Unpack Image:

tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
cd debian-7.8-console-armhf-2015-02-19

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.02 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2015-02-19
    • Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
957ebb617a53a662e0fe03f728e0ddcb  debian-jessie-console-armhf-2015-02-19.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
cd debian-jessie-console-armhf-2015-02-19

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-02-19
    • BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
adbfa79c6748f47e81dd233f06d98b49  BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • Beagle: xM: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle: v3.17.1-armv7-x3 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
7a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • Beagle xM: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle xM: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle xM: v3.17.1-armv7-x3 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
9fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
32c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.01.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

SGX Demos

cd /opt/gfxsdkdemos/ogles2/
sudo ./OGLES2ChameleonMan

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade