Revision as of 12:04, 6 March 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees
  - v3.17.x kernel branch
  - Development Kernel source code

When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
  - Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

http://beagleboard.org/source

Recommended Beagle Software

Mainline U-Boot:

All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf

Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port

Demo Image

Debian Stable (wheezy)

Default username/password:

username: debian
password: temppwd

Image Updated:

2015-02-19
- Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
- BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
- OMAP5432 uEVM: v3.14.33-ti-r50 kernel
- BeagleBoard-X15: v3.14.33-ti-r50 kernel
2015-01-06
- Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
- BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
- OMAP5432 uEVM: v3.14.26-ti-r43 kernel
- BeagleBoard-X15: v3.14.26-ti-r43 kernel
2014-10-29
- Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
- BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
- OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz

Verify Image with:

md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
82a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz

Unpack Image:

tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
cd debian-7.8-console-armhf-2015-02-19

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
BeagleBoard xM - omap3-beagle-xm
BeagleBone/Black - beaglebone
OMAP5432 uEVM - omap5-uevm
BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.02 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

2015-02-19
- Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
- BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
- OMAP5432 uEVM: v3.14.33-ti-r50 kernel
- BeagleBoard-X15: v3.14.33-ti-r50 kernel
2015-01-06
- Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
- BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
- OMAP5432 uEVM: v3.14.26-ti-r43 kernel
- BeagleBoard-X15: v3.14.26-ti-r43 kernel
2014-10-29
- Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
- BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
- OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
957ebb617a53a662e0fe03f728e0ddcb  debian-jessie-console-armhf-2015-02-19.tar.xz

Unpack image:

tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
cd debian-jessie-console-armhf-2015-02-19

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2015-02-19
- BeagleBone Black: v3.14.33-ti-r50 kernel
2015-01-06
- BeagleBone Black: v3.14.26-ti-r43 kernel
2014-10-29
- BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
adbfa79c6748f47e81dd233f06d98b49  BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-02-19
- Beagle: xM: v3.19.0-armv7-x3 kernel
2015-01-06
- Beagle: v3.18.1-armv7-x2 kernel
2014-10-29
- Beagle: v3.17.1-armv7-x3 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
7a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-02-19
- Beagle xM: v3.19.0-armv7-x3 kernel
2015-01-06
- Beagle xM: v3.18.1-armv7-x2 kernel
2014-10-29
- Beagle xM: v3.17.1-armv7-x3 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-02-19
- BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
2015-01-06
- BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
2014-10-29
- BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
9fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-02-19
- OMAP5432 uEVM: v3.14.33-ti-r50 kernel
2015-01-06
- OMAP5432 uEVM: v3.14.26-ti-r43 kernel
2014-10-29
- OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-02-19
- BeagleBoard-X15: v3.14.33-ti-r50 kernel
2015-01-06
- BeagleBoard-X15: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with:

md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
32c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux:

unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

@@ Line 3: / Line 3: @@
 [[Category:Development Boards]]
 [[Category: BeagleBoard]]
-This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
-Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 = Help =
@@ Line 12: / Line 10: @@
 *Kernel related help:
-** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
-** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+** Kernel Trees
-*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Launchpad Stable Kernel 2.6.32 src]
+*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
-*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-dev Launchpad Development Kernel 2.6.32 src]
+*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
-*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-mainline Launchpad Mainline Kernel git src] *Unless you know what your doing, do NOT use the 2.6-mainline branch...
-** [http://elinux.org/BeagleBoardUbuntuKernel Kernel Testing Results]
 *When asking for help, please provide some debugging information:
@@ Line 25: / Line 21: @@
 ** pastebin dmesg
 *** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
+= Official BeagleBoard.org Images for shipping with BeagleBone Black =
+* http://beagleboard.org/source
 = Recommended Beagle Software =
-* Recent x-loader/MLO
-** Rev C2/3/4 Boards are fine and do not need an upgrade
-** Old Rev Bx Boards should upgrade there MLO from here: http://www.angstrom-distribution.org/beagleboard-demo-image-available
-* Recent U-Boot with 'boot.scr' scripts enabled and 'mmc init' support
+Mainline U-Boot:
-** u-boot.bin from here: http://www.angstrom-distribution.org/beagleboard-demo-image-available
+* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
-** Or this one I've archived: [http://elinux.org/BeagleBoardUbuntu#Upgrade_U-Boot U-Boot 2009.08+r37 Upgrade]
+* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
-*** Version 2009.01 (factory installed on C2/3's) and earlier will not work with this guide
+* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
-*** Version 2009.11-rc1-00601-g3aa4b51 (factory installed on C4's) works fine with this guide
-*** 'mmc init' change [http://git.denx.de/?p=u-boot.git;a=commit;h=a85693b3bd4431b05b7df608b6f7733c0f80c53e]
-= Native Net Install =
+= Debian NetInstall =
-==Development PC: Format SD Card==
+Scripts:
+ git clone https://github.com/RobertCNelson/netinstall.git
+ cd netinstall
+Device Options:
+ BeagleBoard --dtb omap3-beagle
+ BeagleBoard xM --dtb omap3-beagle-xm
+ BeagleBone (serial) --dtb am335x-bone-serial
+ BeagleBone (video via cape) --dtb am335x-bone-video
+ BeagleBone Black --dtb am335x-boneblack
+ PandaBoard (A1->A3) --dtb omap4-panda
+ PandaBoard (A4->Ax) --dtb omap4-panda-a4
+ PandaBoard ES  --dtb omap4-panda-es
 You will need a 1GB SD card or greater.
@@ Line 46: / Line 52: @@
   + Desktop environment (GNOME) : ~2.9GB
-Starting with an empty SD card and using gparted, create:
+== Debian Wheezy ==
-MiB Primary Partition, fat32
-  Leave remaining space for the Debian-Installer
+Quick Install script for "board"
+ sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
+So For the BeagleBoard xM:
+ sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
+*Options:
+**--firmware : installs firmware
+**--serial-mode : debian-installer uses Serial Port
+= Demo Image =
+== Debian Stable (wheezy)  ==
+Default username/password:
+*username: debian
+*password: temppwd
+Image Updated:
+*2015-02-19
+** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
+** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
+** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
+** BeagleBoard-X15: v3.14.33-ti-r50 kernel
+*2015-01-06
+** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
+** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
+** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
+** BeagleBoard-X15: v3.14.26-ti-r43 kernel
+*2014-10-29
+** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
+** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
+** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
+Services Active:
+ Note: Depending on your internal network these may work out of the box
+ Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
+ SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
+  Getty, Serial Port
+Default user: debian pass: temppwd
+Get prebuilt image:
+  wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz
+Verify Image with:
+ md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
+a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz
+Unpack Image:
+ tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
+ cd debian-7.8-console-armhf-2015-02-19
-==Development PC: Setup SD U-boot Partition==
+Install Image:
-Mount your SD card fat32 partition. (/media/disk/)
+Quick install script for [board]
+ sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
-Debian Lenny Stable
+board options:
- cd /media/disk/
+*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
- sudo wget http://rcn-ee.net/deb/kernel/CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage
+*BeagleBoard xM             - omap3-beagle-xm
- sudo wget http://ftp.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
+*BeagleBone/Black           - beaglebone
- sudo mv CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage uImage
+*OMAP5432 uEVM              - omap5-uevm
- sudo gzip -d initrd.gz
+*BeagleBoard-X15            - am57xx-beagle-x15
- sudo dd if=initrd of=initrd.pad ibs=8388608 conv=sync
-Create U-boot boot script for netinstall:
+So for the BeagleBoard xM:
+ sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
-Debian Install over DVI Port
+Advanced: Build Image:
- nano netinstall.cmd
- setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
- setenv bootargs 'console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M omapfb.mode=dvi:1280x720MR-16@60'
- boot
-Debian Install over the Serial Port
+  git clone https://github.com/RobertCNelson/omap-image-builder.git
-  nano netinstall.cmd
+  cd omap-image-builder
- setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+  git checkout v2015.02 -b tmp
-  setenv bootargs 'console=ttyS2,115200n8 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M'
-  boot
-Create U-boot *.scr file:
+Stable:
-  mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./netinstall.cmd ./boot.scr
+  ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
-Sync and Unmount your mmc card and boot the beagle, it should find the 'boot.scr' file on your first partition while booting.
+Testing:
-==Beagleboard: netinstall==
+ ./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
- Choose a language
+== Debian Testing (jessie) ==
-  C - No localization
-  English - English
- Configure the network:
+Image Updated:
-  usb0: USB net <- See below for 2.6.29. Could not find usb0 with B7 installing 2.6.28.
+*2015-02-19
-  eth0: Ethernet <- Your usb-ethernet device
+** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
-  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
+** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
+** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
+** BeagleBoard-X15: v3.14.33-ti-r50 kernel
+*2015-01-06
+** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
+** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
+** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
+** BeagleBoard-X15: v3.14.26-ti-r43 kernel
+*2014-10-29
+** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
+** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
+** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
-  Configuring usb0 network bridge for 2.6.29:
+Get prebuilt image:
-  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+  wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz
-   # ifconfig ethX 0.0.0.0
-   # ifconfig usbX 0.0.0.0
-   # brctl addbr brX
-   # brctl addif brX ethX
-   # brctl addif brX usbX
-   # ifconfig brX up
-   # dhclient brX
-  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
-  Continue the install without loading kernel modules? : <yes>
+Verify Image with:
+ md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
+ebb617a53a662e0fe03f728e0ddcb  debian-jessie-console-armhf-2015-02-19.tar.xz
-  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+Unpack image:
-  Logical Volume Manager not available: <Continue>
+  tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
+ cd debian-jessie-console-armhf-2015-02-19
- Partition disks:
+Then follow the directions shown above with the other images...
-  Guided - Use the largest continuous free space
- Partitioning scheme....
+= Flasher =
-Example:
+== eMMC: BeagleBone Black ==
- MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
- >  #1 primary  57.5 MB     fat32
- >  #2 primary   1.8 GB B f ext3  /
- >  #5 logical 148.0 MB   f swap  swap
- Finish partitioning and write changes to disk
-  Write the changes to disk? : <yes>
-  No installable kernel was found in the defined APT sources? :
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
-  Continue without installing a kernel? : <yes>
-  Standard System
+Script for reference: (this is the script that writes to the eMMC)
+  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
- No BootLoader: <ok>
+This script will only take about 5-6 Minutes after power on.
-==Development PC: Setup U-boot for Normal Boot==
+Notes:
+* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
+* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
-Create a U-boot normal boot script:
+User: debian
+pass: temppwd
- DVI Port
+Image Updated:
- nano normal.cmd
+*2015-02-19
- setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+** BeagleBone Black: v3.14.33-ti-r50 kernel
- setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
+*2015-01-06
- boot
+** BeagleBone Black: v3.14.26-ti-r43 kernel
+*2014-10-29
+** BeagleBone Black: v3.14.22-ti-r31 kernel
- Serial Port
+Get prebuilt image:
-  nano normal.cmd
+  wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
- setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
- setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
-Create U-boot *.scr file:
+Verify Image with:
+ md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ adbfa79c6748f47e81dd233f06d98b49  BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
- mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./normal.cmd ./boot.scr
+Follow the "standard" update procedure.
+ http://elinux.org/Beagleboard:Updating_The_Software
-Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+Linux:
+ unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
-==Beagleboard: install kernel-image==
+= raw microSD img =
-===Script File===
+== BeagleBoard (classic) ==
-Every Kernel upload going further on rcn-ee.net will now have an 'install-me.sh' file in the same directory..
- example: http://www.rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.6-x6.2/
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
- wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.6-x6.2/install-me.sh
- sudo /bin/bash install-me.sh
-Reboot with your new uImage
+User: debian
+pass: temppwd
-= Debian Configuration =
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
+Image Updated:
+*2015-02-19
+** Beagle: xM: v3.19.0-armv7-x3 kernel
+*2015-01-06
+** Beagle: v3.18.1-armv7-x2 kernel
+*2014-10-29
+** Beagle: v3.17.1-armv7-x3 kernel
+Get prebuilt image:
+ wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+Verify Image with:
+ md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+Linux:
+ unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
+== BeagleBoard xM ==
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+User: debian
+pass: temppwd
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
+Image Updated:
+*2015-02-19
+** Beagle xM: v3.19.0-armv7-x3 kernel
+*2015-01-06
+** Beagle xM: v3.18.1-armv7-x2 kernel
+*2014-10-29
+** Beagle xM: v3.17.1-armv7-x3 kernel
+Get prebuilt image:
+ wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+Verify Image with:
+ md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+Linux:
+ unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
+== BeagleBone/BeagleBone Black ==
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+User: debian
+pass: temppwd
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
+Image Updated:
+*2015-02-19
+** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
+*2015-01-06
+** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
+*2014-10-29
+** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
+Get prebuilt image:
+ wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+Verify Image with:
+ md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
-== Serial Ports ==
+Linux:
+ unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
-Lenny
+== OMAP5432 uEVM ==
-edit /etc/inittab and add:
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
- S:2345:respawn:/sbin/getty 115200 ttyS2
-For root access over the serial port add ttyS2 to /etc/securetty
+User: debian
+pass: temppwd
-== WiFi ==
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
-See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+Image Updated:
+*2015-02-19
+** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
+*2015-01-06
+** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
+*2014-10-29
+** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
-== SGX Video Acceleration ==
+Get prebuilt image:
+ wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
-Use a "corporate email" and download the latest (3.01.00.02):
+Verify Image with:
-  http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/latest/index_FDS.html
+ md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+  bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
-=== Kernel Modules ===
+Linux:
+ unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
-Use the "build_sgx_module.sh" script in 2.6-stable, module source is now in the *.bin
+== BeagleBoard-X15 ==
- https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
-Copy uImage and modules from the deploy directory to your SD card.
+User: debian
+pass: temppwd
-Copy the GFX_Linux_SDK.tar.gz examples to either your SD card or another media (large file) then boot your omap board.
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
-Run depmod:
+Image Updated:
- sudo depmod -a omaplfb
+*2015-02-19
+** BeagleBoard-X15: v3.14.33-ti-r50 kernel
+*2015-01-06
+** BeagleBoard-X15: v3.14.26-ti-r43 kernel
-Tweak System Libraries:
+Get prebuilt image:
-  sudo ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
+  wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
- sudo ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
-=== Startup Script ===
+Verify Image with:
+ md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
-For 3.01.00.02
+Linux:
+ unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
+ sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
-Lenny:
+= Debian Configuration =
- sudo nano /etc/rcS.d/S60pvr.sh
- sudo chmod +x /etc/rcS.d/S60pvr.sh
-Squeeze: (probally lenny too)
+== Serial Ports ==
- sudo nano /etc/init.d/pvr
- sudo chmod +x /etc/init.d/pvr
- sudo update-rc.d pvr defaults
-Contents of S60pvr.sh/pvr
+To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
- #!/bin/sh
+  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
- if [ "$1" = "" ]; then
- 	echo PVR-INIT: Please use start, stop, or restart.
- 	exit 1
- fi
- if [ "$1" = "stop" -o  "$1" = "restart" ]; then
- 	echo Stopping PVR
- 	rmmod omaplfb 2>/dev/null
- 	rmmod pvrsrvkm 2>/dev/null
- fi
- if [ "$1" = "stop" ]; then
- 	exit 0
- fi
- echo Starting PVR
- modprobe omaplfb
- pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
- if [ -e /dev/pvrsrvkm ] ; then
- 	rm -f /dev/pvrsrvkm
- fi
- mknod /dev/pvrsrvkm c $pvr_maj 0
- chmod 666 /dev/pvrsrvkm
- touch /etc/powervr-esrev
- SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
- ES_REVISION="$(cat /proc/cpuinfo | grep "CPU revision" | awk -F: '{print $2}')"
- if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
- 	echo -n "Starting SGX fixup for"
- 	if [ "${ES_REVISION}" = " 3" ] ; then
- 	echo " ES3.x"
- 	cp -a /usr/lib/ES3.0/* /usr/lib
- 	cp -a /usr/bin/ES3.0/* /usr/bin
- 	else
- 	echo " ES2.x"
- 	cp -a /usr/lib/ES2.0/* /usr/lib
- 	cp -a /usr/bin/ES2.0/* /usr/bin
- 	fi
- 	echo "${ES_REVISION}" > /etc/powervr-esrev
- fi
- /usr/bin/pvrsrvinit
-=== Test SGX with a DEMO ===
+To start a console on the USB ACM device, add the following to /etc/inittab,
+ GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
-In GFX_Linux_SDK:
+==Install Latest Kernel Image==
- cd OGLES/SDKPackage/Binaries/CommonX11/Demos/ChameleonMan
- ./OGLESChameleonMan
-=== Trouble Shooting ===
+Script:
+ cd /opt/scripts/tools
+ git pull
- sudo rm /etc/powervr-esrev
+Stable:
-  sudo depmod -a omaplfb
+  ./update_kernel.sh
- sudo /etc/init.d/pvr restart
-== Xorg omapfb Drivers ==
+Testing:
+ ./update_kernel.sh --beta-kernel
-By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+Custom: (has to be on rcn-ee.net)
+ ./update_kernel.sh --kernel v3.8.13-bone69
-Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+Reboot with your new Kernel Image.
-/etc/X11/xorg.conf:
+== Xorg Drivers ==
- Section "Device"
- 	Identifier	"Configured Video Device"
- 	Option		"UseFBDev"		"true"
- 	Driver		"fbdev"
- EndSection
-cat /var/log/Xorg.0.log | grep FBDEV
+Script:
- (II) FBDEV: driver for framebuffer: fbdev
+ cd /opt/scripts/tools/
- (II) FBDEV(0): using default device
+  git pull
-  (II) FBDEV(0): Creating default Display subsection in Screen section
- (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
- (==) FBDEV(0): RGB weight 565
-Login into Debian and open a new terminal, xorg has to be running..
+BeagleBoard/PandaBoard:
+ cd /opt/scripts/tools/graphics/
+ ./ti-omapdrm.sh
-xvinfo -display :0.0
+BeagleBone/BeagleBone Black:
-  X-Video Extension version 2.2
+  cd /opt/scripts/tools/graphics/
- screen #0
+ ./ti-tilcdc.sh
-  no adaptors present
-=== Drivers ===
+== SGX Drivers ==
-Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+=== SGX BeagleBone/BeagleBone Black ===
-Lenny:
+Note, these are FBDEV only, no xorg/x11/etc...
- wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
- sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
-Squeeze/Sid:
+Install sgx modules (3.14.x ti kernel):
-  sudo apt-get install xserver-xorg-video-omap3
+  sudo apt-get install ti-sgx-es8-modules-`uname -r`
+ sudo depmod -a `uname -r`
+ sudo update-initramfs -uk `uname -r`
-=== xorg.conf ===
+Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
-/etc/X11/xorg.conf
+ git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
+ cd ti-linux-kernel-dev/
+ git checkout origin/ti-linux-3.14.y -b tmp-sgx
+ ./sgx_create_package.sh
- Section "Monitor"
+Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
-     Identifier "Configured Monitor"
+  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
-  EndSection
+  cd /opt/gfxinstall/
+  sudo ./sgx-install.sh
-  Section "Screen"
+  sudo reboot
-     Identifier "Default Screen"
-     Device "Configured Video Device"
-     #Limited by SGX?
-     DefaultDepth 16
- EndSection
- Section "Device"
-     Identifier "Configured Video Device"
-     Driver "omapfb"
-     Option "fb" "/dev/fb0"
-  EndSection
-To verify it was correctly installed, reboot and:
+Verify omaplfb & pvrsrvkm loaded
+ debian@arm:~$ lsmod | grep omaplfb
+ omaplfb                12065  0
+ pvrsrvkm              178782  1 omaplfb
-cat /var/log/Xorg.0.log | grep omapfb
+= Building Kernel =
- (II) LoadModule: "omapfb"
- (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
- (II) Module omapfb: vendor="X.Org Foundation"
- (II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
- (WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
- (II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
- (II) omapfb(0): Creating default Display subsection in Screen section
- (**) omapfb(0): Depth 16, (--) framebuffer bpp 16
- (==) omapfb(0): RGB weight 565
- (==) omapfb(0): Default visual is TrueColor
- (--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
- (**) omapfb(0):  Built-in mode "current"
- (==) omapfb(0): DPI set to (96, 96)
- (II) omapfb(0): DPMS enabled
- (II) omapfb(0): Video plane capabilities:
- (II) omapfb(0): Video plane supports the following image formats:
- (II) omapfb(0): XVideo extension initialized
-Login into Debian and open a new terminal, xorg has to be running..
+Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
-xvinfo -display :0.0
+== Beagle/Beagle xM ==
-  X-Video Extension version 2.2
+  http://eewiki.net/display/linuxonarm/BeagleBoard
- screen #0
-   Adaptor #0: "OMAP XV adaptor"
-     number of ports: 1
-     port base: 56
-     operations supported: PutImage
-     supported visuals:
-       depth 16, visualID 0x21
-     number of attributes: 1
-     etc..
-== DSP ==
+== BeagleBone ==
+ http://eewiki.net/display/linuxonarm/BeagleBone
-= Kernel Build =
+== BeagleBone Black ==
+ http://eewiki.net/display/linuxonarm/BeagleBone+Black
-https://launchpad.net/~beagleboard-kernel
+== Panda/Panda ES ==
+ http://eewiki.net/display/linuxonarm/PandaBoard
-Register on launchpad.net, install bzr
+= Upgrading from Debian 5 to Debian 6 =
- sudo apt-get install bzr
-Download SRC
+[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
- bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
- bzr branch lp:~beagleboard-kernel/+junk/2.6-dev
-Build Kernel
+= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
- . build_kernel.sh
-Build SGX Modules
+Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
- . build_sgx_modules.sh
-Build Deb File
+ sudo apt-get update ; sudo apt-get upgrade
-  . build_deb.sh
+  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
+ sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
+ sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Difference between revisions of "BeagleBoardDebian"

Revision as of 12:04, 6 March 2015

Contents

Help

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Debian NetInstall

Debian Wheezy

Demo Image

Debian Stable (wheezy)

Debian Testing (jessie)

Flasher

eMMC: BeagleBone Black

raw microSD img

BeagleBoard (classic)

BeagleBoard xM

BeagleBone/BeagleBone Black

OMAP5432 uEVM

BeagleBoard-X15

Debian Configuration

Serial Ports

Install Latest Kernel Image

Xorg Drivers

SGX Drivers

SGX BeagleBone/BeagleBone Black

Building Kernel

Beagle/Beagle xM

BeagleBone

BeagleBone Black

Panda/Panda ES

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Navigation menu

Search