Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
(→‎gst-dsp)
m (→‎SGX BeagleBone/BeagleBone Black)
(106 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
−
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
−
 
 
−
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
−
 
 
−
*armhf
 
−
** Port Details: http://wiki.debian.org/ArmHardFloatPort
 
−
** Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
 
= Help =
 
= Help =
Line 16: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
−
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
−
** Kernel Tree's
+
** Kernel Trees
−
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.2.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
−
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.6.x) branch]
 
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 28: Line 21:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
Line 37: Line 33:
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
Line 42: Line 52:
 
  + Desktop environment (GNOME) : ~2.9GB
 
  + Desktop environment (GNOME) : ~2.9GB
  
−
== Debian Squeeze ==
+
== Debian Wheezy ==
−
 
 
−
git clone git://github.com/RobertCNelson/netinstall.git
 
−
cd netinstall
 
  
 
Quick Install script for "board"
 
Quick Install script for "board"
−
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
−
 
 
−
"board" Options:
 
−
*BeagleBoard Ax/Bx - beagle_bx
 
−
*BeagleBoard Cx    - beagle_cx
 
−
*BeagleBoard xMA/B/C    - beagle_xm
 
−
*BeagleBone Ax    - bone
 
−
*PandaBoard Ax - panda
 
−
*PandaBoard ES - panda_es
 
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
−
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  
 
*Options:
 
*Options:
−
**--uboot : beagle, panda, bone
 
−
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
  
−
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
 
  
−
==Beagleboard: NetInstall==
+
= Demo Image =
  
−
  Choose a language
+
== Debian Stable (wheezy) ==
−
  C - No localization
 
−
  English - English
 
  
−
Configure the network:
+
Default username/password:
−
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
*username: debian
−
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+
*password: temppwd
−
  eth0: Ethernet <- Your usb-ethernet device
 
−
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
−
===usb0 howto===
+
Image Updated:
−
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
*2015-02-19
 +
** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
−
  Configuring usb0 network bridge for 2.6.29:
+
Services Active:
−
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
  Note: Depending on your internal network these may work out of the box
−
  # ifconfig ethX 0.0.0.0
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
−
  # ifconfig usbX 0.0.0.0
+
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
−
  # brctl addbr brX
+
Getty, Serial Port
−
  # brctl addif brX ethX
 
−
  # brctl addif brX usbX
 
−
  # ifconfig brX up
 
−
  # dhclient brX
 
−
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
−
Continue the install without loading kernel modules? : <yes>
+
Default user: debian pass: temppwd
  
−
  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Get prebuilt image:
−
  Logical Volume Manager not available: <Continue>
+
  wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz
  
−
  Partition disks:
+
Verify Image with:
−
  Guided - Use the largest continuous free space
+
  md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
 +
82a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz
  
−
  Partitioning scheme....
+
Unpack Image:
 +
  tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
 +
cd debian-7.8-console-armhf-2015-02-19
  
−
Example:
+
Install Image:
−
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
 
−
>  #1 primary  57.5 MB    fat32
 
−
>  #2 primary  1.8 GB B f ext3  /
 
−
>  #5 logical 148.0 MB  f swap  swap
 
−
Finish partitioning and write changes to disk
 
−
  Write the changes to disk? : <yes>
 
−
 
 
−
No installable kernel was found in the defined APT sources? :
 
−
  Continue without installing a kernel? : <yes>
 
  
−
  Standard System
+
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
−
No BootLoader: <ok>
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
 +
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
 +
*BeagleBoard-X15            - am57xx-beagle-x15
  
−
==Beagleboard: Install Latest Kernel==
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
−
Script File:
+
Advanced: Build Image:
  
−
  Lenny:
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
−
wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
+
  cd omap-image-builder
−
  sudo /bin/bash install-me.sh
+
  git checkout v2015.02 -b tmp
−
 
−
Squeeze:
 
−
export DIST=squeeze
 
−
export ARCH=armel
 
−
 
−
Beagle/Panda
 
−
export BOARD=omap
 
−
 
−
BeagleBone
 
−
export BOARD=omap-psp
 
−
 
−
wget http://rcn-ee.net/deb/${DIST}-${ARCH}/LATEST-${BOARD}
 
−
  wget $(cat ./LATEST-${BOARD} | grep STABLE | awk '{print $3}')
 
−
/bin/bash install-me.sh
 
  
−
Reboot with your new Kernel
+
Stable:
  
−
= Demo Image =
+
./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
  
−
== Debian Wheezy snapshot ==
+
Testing:
  
−
Default username/password:
+
./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
−
*username: debian
 
−
*password: temppwd
 
  
−
Default root user/password
+
== Debian Testing (jessie) ==
−
*user: root
 
−
*password: root
 
  
 
Image Updated:
 
Image Updated:
−
*2012-11-29
+
*2015-02-19
−
** Beagle/Panda ES: v3.6.8-x4 kernel
+
** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
−
** Panda: v3.2.34-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
+
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
−
** Bone: v3.2.33-psp26 kernel (next release should be v3.7.x based)
+
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
−
* October 19th
+
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
−
** Beagle/Panda ES: v3.6.2-x3 kernel
+
*2015-01-06
−
** Panda: v3.2.32-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
+
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
−
** Bone: v3.2.32-psp25 kernel
+
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
−
* September 27th
+
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
−
** Beagle/Panda: v3.2.30-x14 kernel
+
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
−
** Bone: v3.2.30-psp23 kernel
+
*2014-10-29
−
* September 10th
+
** Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
−
** Beagle/Panda: v3.2.28-x14 kernel
+
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
−
** Bone: v3.2.28-psp21 kernel (not with "backlight" support for CircuitCo LCD3)
+
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
−
*July 29th: 2012-07-29
 
−
** Beagle/Panda: v3.2.24-x14 kernel
 
−
** Bone: v3.2.23-psp18 kernel
 
−
*July 16th: 2012-07-16
 
−
** Beagle/Panda: v3.2.23-x14 kernel
 
−
** Bone: v3.2.21-psp16 kernel
 
−
*June 12th: 2012-06-10
 
−
** Beagle/Panda: v3.2.19-x13 kernel
 
−
** Bone: v3.2.18-psp14 kernel (now supports the BeagleBone LCD from CircuitCo)
 
−
 
 
−
Services Active:
 
−
Note: Depending on your internal network these may work out the box
 
−
Apache, Port 80: http://arm/
 
−
SSH, Port 22: ssh ubuntu@arm
 
−
Getty, Serial Port
 
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz
  
−
  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
Verify Image with:
−
  mirrors (will take some time to update):
+
  md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
−
  wget http://ynezz.ibawizard.net/beagleboard/wheezy/debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
  957ebb617a53a662e0fe03f728e0ddcb debian-jessie-console-armhf-2015-02-19.tar.xz
  
−
Verify Image with:  
+
Unpack image:
−
  md5sum debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
  tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
−
  60e6897c9e85383324e920c177a8c4ae  debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
  cd debian-jessie-console-armhf-2015-02-19
  
−
Unpack Image:
+
Then follow the directions shown above with the other images...
−
tar xJf debian-wheezy-minimal-armhf-2012-11-29.tar.xz
 
−
cd debian-wheezy-minimal-armhf-2012-11-29
 
  
−
Install Image:
+
= Flasher =
  
−
Quick Install script for "board"
+
== eMMC: BeagleBone Black ==
−
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
 
  
−
"board" options:  
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
−
*BeagleBoard Ax/Bx - beagle_bx
 
−
*BeagleBoard Cx/Dx - beagle_cx
 
−
*BeagleBoard xM    - beagle_xm
 
−
*BeagleBone Ax    - bone
 
−
*PandaBoard Ax    - panda
 
−
*PandaBoard ES    - panda_es
 
  
−
So For the BeagleBoard xM:
+
Script for reference: (this is the script that writes to the eMMC)
−
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
−
*Additional Options
+
This script will only take about 5-6 Minutes after power on.
−
** --rootfs <ext4 default>
 
−
** --swap_file <swap file size in MB's>
 
−
** --addon pico <ti pico projector>
 
−
** --svideo-ntsc <use ntsc over dvi for video)
 
−
** --svideo-pal <use pal over dvi for video)
 
  
−
= Debian Configuration =
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
−
== Serial Ports ==
+
User: debian
 +
pass: temppwd
  
−
Lenny
+
Image Updated:
 +
*2015-02-19
 +
** BeagleBone Black: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBone Black: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** BeagleBone Black: v3.14.22-ti-r31 kernel
  
−
edit /etc/inittab and add:
+
Get prebuilt image:
−
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
  wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
For root access over the serial port add ttyS2 to /etc/securetty
+
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
adbfa79c6748f47e81dd233f06d98b49  BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
 +
Follow the "standard" update procedure.
 +
http://elinux.org/Beagleboard:Updating_The_Software
  
 +
Linux:
 +
unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
−
Squeeze
+
= raw microSD img =
  
−
edit /etc/inittab and add:
+
== BeagleBoard (classic) ==
−
S:2345:respawn:/sbin/getty 115200 ttyO2
 
  
−
== WiFi ==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
−
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
User: debian
 +
pass: temppwd
  
−
== SGX Video Acceleration ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
−
=== SGX armel/armhf v3.4.x+ ===
+
Image Updated:
−
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
+
*2015-02-19
 +
** Beagle: xM: v3.19.0-armv7-x3 kernel
 +
*2015-01-06
 +
** Beagle: v3.18.1-armv7-x2 kernel
 +
*2014-10-29
 +
** Beagle: v3.17.1-armv7-x3 kernel
  
−
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
Get prebuilt image:
 +
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
==== Re-Build Kernel and SGX Kernel Modules ====
+
Verify Image with:
−
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
−
cd stable-kernel
+
  7a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
−
git checkout origin/v3.6.x -b v3.6.x
 
−
  ./build_kernel.sh (and then follow the directions as the script runs...)
 
  
−
Build kernel
+
Linux:
−
  ./build_kernel.sh
+
  unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
−
Build SGX modules
+
== BeagleBoard xM ==
−
./sgx_build_modules.sh
 
  
−
Insert SD card, make sure to modify MMC in system.sh
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
−
./tools/install_image.sh
 
  
−
Place SD card into the device and boot...
+
User: debian
−
cd /opt/sgx
+
pass: temppwd
−
sudo tar xf GFX_4.0*_libs.tar.gz
 
−
sudo ./install-sgx.sh
 
  
−
Reboot, check modules (lsmod):
+
Auto partition resize:
−
  Module                  Size  Used by
+
  cd /opt/scripts/tools
−
  bufferclass_ti          5727  0
+
  git pull
−
  omaplfb                11512  0
+
  ./grow_partition.sh
−
  pvrsrvkm              165208  2 bufferclass_ti,omaplfb
+
  sudo reboot
  
−
Blit Test:
+
Image Updated:
−
ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
+
*2015-02-19
−
------------------ SGX 3D Blit test -----------------
+
** Beagle xM: v3.19.0-armv7-x3 kernel
−
----------------------- Start -----------------------
+
*2015-01-06
−
Call PVRSRVConnect with a valid argument:
+
** Beagle xM: v3.18.1-armv7-x2 kernel
−
  OK
+
*2014-10-29
−
Get number of devices from PVRSRVEnumerateDevices:
+
** Beagle xM: v3.17.1-armv7-x3 kernel
−
  OK
 
−
.... Reported 1 devices
 
−
.... Device Number  | Device Type
 
−
            0000    | PVRSRV_DEVICE_ID_SGX
 
−
Attempt to acquire device 0:
 
−
  OK
 
−
Getting SGX Client info
 
−
  OK
 
−
.... ui32ProcessID:1133
 
−
Display Class API: enumerate devices
 
−
  OK
 
−
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
−
  OK
 
−
Display Class API: open device
 
−
  OK
 
−
Display Class API: Get display info
 
−
  OK
 
−
.... Name:PowerVR OMAP Linux Display Driver
 
−
.... MaxSwapChains:1
 
−
.... MaxSwapChainBuffers:1
 
−
.... MinSwapInterval:0
 
−
.... MaxSwapInterval:1
 
−
Display Class API: enumerate display formats
 
−
  OK
 
−
  OK
 
−
.... Display format 0 - Pixelformat:1
 
−
Display Class API: enumerate display dimensions
 
−
  OK
 
−
  OK
 
−
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
−
Attempt to create memory context for SGX:
 
−
  OK
 
−
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
−
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
−
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
−
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
−
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
−
.... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
−
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
−
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
−
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
−
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
−
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
−
Display Class API: get the system (primary) buffer
 
−
  OK
 
−
Display Class API: map display surface to SGX
 
−
  OK
 
−
Attempt to create transfer context for SGX:
 
−
  OK
 
−
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
−
(bottom right quadrant should be red on blue background):
 
−
  OK
 
−
  OK
 
−
Do a SRCCOPY blit to the top left quadrant of the display:
 
−
(top left quadrant should be striped (r/g/b/w) on blue background):
 
−
  OK
 
−
  OK
 
−
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
−
(top right quadrant should be yellow):
 
−
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
−
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
−
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
−
  OK
 
−
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
−
and then present the RGB565 to the bottom right quadrant of the screen
 
−
(bottom right quadrant should be a red gradient):
 
−
  OK
 
−
  OK
 
−
  OK
 
−
  OK
 
−
Free the off screen surfaces:
 
−
  OK
 
−
  OK
 
−
  OK
 
−
  OK
 
−
Destroy the transfer context:
 
−
  OK
 
−
Display Class API: unmap display surface from SGX
 
−
  OK
 
−
Destroy Device Memory Context
 
−
Display Class API: close the device
 
−
  OK
 
−
Release SGX Client Info:
 
−
  OK
 
−
Disconnect from services:
 
−
  OK
 
−
------------------ SGX 3D Blit test -----------------
 
−
------------------------ End ------------------------
 
  
−
=== SGX Legacy armel only upto v3.2.x ===
+
Get prebuilt image:
−
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Verify Image with:
−
  https://github.com/RobertCNelson/stable-kernel
+
md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
Linux:
−
  https://github.com/RobertCNelson/stable-kernel/issues/8
+
unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
−
oneiric:
+
  sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
−
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
 
−
/bin/bash install-me.sh
 
  
−
==== SDK unPackage Script ====
+
== BeagleBone/BeagleBone Black ==
  
−
Download the latest version of the "create_sgx_package.sh" script
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
−
2.6.37
 
−
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
 
−
2.6.38->3.2.x
 
−
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
 
  
−
Make script executable
+
User: debian
−
chmod a+x ./create_sgx_package_*.sh
+
pass: temppwd
  
−
Run script
+
Auto partition resize:
−
  ./create_sgx_package_*.sh
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
−
After Successfully running:
+
Image Updated:
 +
*2015-02-19
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
  
−
:~/temp$ ls
+
Get prebuilt image:
−
create_sgx_package.sh
+
  wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
−
  GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
 
−
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
−
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
−
SDK
 
−
SDK_BIN
 
  
−
==== Beagle: GFX_*_libs.tar.gz ====
+
Verify Image with:
 +
md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
9fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
  tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
Linux:
−
  ./install-SGX.sh (copies necessary SGX libs and startup script)
+
  unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
−
./run-SGX.sh (force run the new init script, or you can just reboot...)
+
  sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
−
On successful install:
+
== OMAP5432 uEVM ==
−
Stopping PVR
 
−
Starting PVR
 
−
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
−
Reboot for good measure
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
−
sudo reboot
 
  
−
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
User: debian
 +
pass: temppwd
  
−
  tar xf GFX_Linux_SDK.tar.gz
+
Auto partition resize:
−
  cd GFX_Linux_SDK
+
  cd /opt/scripts/tools
−
  tar xf OGLES.tar.gz
+
  git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
−
==== Test SGX with a DEMO ====
+
Image Updated:
 +
*2015-02-19
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
*2014-10-29
 +
** OMAP5432 uEVM: v3.14.22-ti-r31 kernel
  
−
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Get prebuilt image:
−
./OGLESEvilSkull
+
  wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
==== Trouble Shooting ====
+
Verify Image with:
 +
md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
  sudo rm /etc/powervr-esrev
+
Linux:
−
sudo depmod -a omaplfb
+
  unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
−
  sudo /etc/init.d/pvr restart
+
  sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
−
== DSP ==
+
== BeagleBoard-X15 ==
  
−
=== gst-dsp ===
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
−
The following Gstreamer elements will be installed:
+
User: debian
 +
pass: temppwd
  
−
  $ gst-inspect | grep dsp
+
Auto partition resize:
−
  dvdspu:  dvdspu: Sub-picture Overlay
+
  cd /opt/scripts/tools
−
  dsp:  dspdummy: DSP dummy element
+
  git pull
−
  dsp: dspvdec: DSP video decoder
+
  ./grow_partition.sh
−
  dsp: dspadec: DSP audio decoder
+
  sudo reboot
−
  dsp: dsph263enc: DSP video encoder
 
−
  dsp: dspmp4venc: DSP MPEG-4 video encoder
 
−
  dsp:  dspjpegenc: DSP video encoder
 
−
  dsp:  dsph264enc: DSP video encoder
 
−
  dsp:  dspvpp: DSP VPP filter
 
−
  dsp:  dspipp: DSP IPP
 
  
−
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
Image Updated:
 +
*2015-02-19
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
  
−
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
Get prebuilt image:
−
voodoo@beagle-xma-512mb:~$ zcat /proc/config.gz | grep TIDSP
+
wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
−
CONFIG_TIDSPBRIDGE=m
 
−
CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
 
−
# CONFIG_TIDSPBRIDGE_DEBUG is not set
 
−
CONFIG_TIDSPBRIDGE_RECOVERY=y
 
−
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
−
CONFIG_TIDSPBRIDGE_WDT3=y
 
−
CONFIG_TIDSPBRIDGE_WDT_TIMEOUT=5
 
−
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
−
# CONFIG_TIDSPBRIDGE_BACKTRACE is not
 
  
−
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
Verify Image with:
 +
md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
32c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
  
−
Download the latest version of the "create_dsp_package.sh" script
+
Linux:
−
  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
+
unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
 +
  sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX
  
−
Make script executable
+
= Debian Configuration =
−
chmod a+x ./create_dsp_package.sh
 
  
−
Package script:
+
== Serial Ports ==
−
./create_dsp_package.sh
 
  
−
Copy DSP_Install_libs.tar.gz to beagle
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
 +
T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
−
Setup network...
+
To start a console on the USB ACM device, add the following to /etc/inittab,
 +
GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
−
Extract:
+
==Install Latest Kernel Image==
−
tar xf DSP_Install_libs.tar.gz
 
  
−
Install
+
Script:
−
  ./install-DSP.sh
+
  cd /opt/scripts/tools
 +
git pull
  
−
Build gst-dsp stuff..
+
Stable:
−
  ./install-gst-dsp.sh
+
  ./update_kernel.sh
  
−
Start dspbridge (or just reboot)
+
Testing:
−
  sudo /etc/init.d/dsp start
+
  ./update_kernel.sh --beta-kernel
  
−
Test dspbridge
+
Custom: (has to be on rcn-ee.net)
−
  sudo dsp-test
+
  ./update_kernel.sh --kernel v3.8.13-bone69
  
−
Playbin:
+
Reboot with your new Kernel Image.
−
sudo gst-launch playbin2 uri=file://(file)
 
  
−
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
== Xorg Drivers ==
−
Note: seems broken in ubuntu precise armhf...
 
  
−
  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
Script:
 +
  cd /opt/scripts/tools/
 +
git pull
  
−
Screenshot: (on my xm it's a little jerky at the moment, investigating..)
+
BeagleBoard/PandaBoard:
−
  http://rcn-ee.net/bugs/dsp/dsp_v3.2.1-x2-test.jpg
+
  cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
−
== Xorg omapfb Drivers ==
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
−
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== SGX Drivers ==
  
−
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
=== SGX BeagleBone/BeagleBone Black ===
  
−
/etc/X11/xorg.conf:
+
Note, these are FBDEV only, no xorg/x11/etc...
−
Section "Device"
 
−
Identifier "Configured Video Device"
 
−
Option "UseFBDev" "true"
 
−
Driver "fbdev"
 
−
EndSection
 
  
−
cat /var/log/Xorg.0.log | grep FBDEV
+
Install sgx modules (3.14.x ti kernel):
−
(II) FBDEV: driver for framebuffer: fbdev
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
−
  (II) FBDEV(0): using default device
+
  sudo depmod -a `uname -r`
−
  (II) FBDEV(0): Creating default Display subsection in Screen section
+
  sudo update-initramfs -uk `uname -r`
−
  (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
−
(==) FBDEV(0): RGB weight 565
 
  
−
Login into Debian and open a new terminal, xorg has to be running..
+
Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
−
xvinfo -display :0.0
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
−
  X-Video Extension version 2.2
+
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
−
  screen #0
+
cd /opt/gfxinstall/
−
  no adaptors present
+
  sudo ./sgx-install.sh
 +
  sudo reboot
  
−
=== Drivers ===
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
−
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
= Building Kernel =
  
−
Lenny:
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
−
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
−
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
−
Squeeze/Sid:
+
== Beagle/Beagle xM ==
−
  sudo apt-get install xserver-xorg-video-omap3
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
−
=== xorg.conf ===
+
== BeagleBone ==
−
/etc/X11/xorg.conf
+
http://eewiki.net/display/linuxonarm/BeagleBone
  
−
Section "Monitor"
+
== BeagleBone Black ==
−
    Identifier "Configured Monitor"
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
−
  EndSection
 
−
 
−
Section "Screen"
 
−
    Identifier "Default Screen"
 
−
    Device "Configured Video Device"
 
−
    #Limited by SGX?
 
−
    DefaultDepth 16
 
−
EndSection
 
−
 
−
Section "Device"
 
−
    Identifier "Configured Video Device"
 
−
    Driver "omapfb"
 
−
    Option "fb" "/dev/fb0"
 
−
EndSection
 
  
−
To verify it was correctly installed, reboot and:
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
−
cat /var/log/Xorg.0.log | grep omapfb
+
= Upgrading from Debian 5 to Debian 6 =
−
(II) LoadModule: "omapfb"
 
−
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
−
(II) Module omapfb: vendor="X.Org Foundation"
 
−
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
−
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
−
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
−
(II) omapfb(0): Creating default Display subsection in Screen section
 
−
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
−
(==) omapfb(0): RGB weight 565
 
−
(==) omapfb(0): Default visual is TrueColor
 
−
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
−
(**) omapfb(0):  Built-in mode "current"
 
−
(==) omapfb(0): DPI set to (96, 96)
 
−
(II) omapfb(0): DPMS enabled
 
−
(II) omapfb(0): Video plane capabilities:
 
−
(II) omapfb(0): Video plane supports the following image formats:
 
−
(II) omapfb(0): XVideo extension initialized
 
  
−
Login into Debian and open a new terminal, xorg has to be running..
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
  
−
xvinfo -display :0.0
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
−
X-Video Extension version 2.2
 
−
screen #0
 
−
  Adaptor #0: "OMAP XV adaptor"
 
−
    number of ports: 1
 
−
    port base: 56
 
−
    operations supported: PutImage
 
−
    supported visuals:
 
−
      depth 16, visualID 0x21
 
−
    number of attributes: 1
 
−
    etc..
 
  
−
== Building Kernel ==
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
  
−
https://github.com/RobertCNelson/stable-kernel
+
sudo apt-get update ; sudo apt-get upgrade
−
 
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
−
Download SRC
+
  sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
−
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade
−
 
 
−
Build Kernel
 
−
./build_kernel.sh
 
−
 
 
−
Optional Building Deb File
 
−
  ./build_deb.sh
 
−
 
 
−
= Upgrading from Debian 5 to Debian 6 =
 
−
 
 
−
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 

Revision as of 12:04, 6 March 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts: 

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options: 

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater. 

Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB

Debian Wheezy

Quick Install script for "board" 

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf

So For the BeagleBoard xM: 

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port


Demo Image

Debian Stable (wheezy)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-02-19
    • Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Services Active: 

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/debian-7.8-console-armhf-2015-02-19.tar.xz

Verify Image with: 

md5sum debian-7.8-console-armhf-2015-02-19.tar.xz
82a8e582c8ac45d54489f1d09b873788  debian-7.8-console-armhf-2015-02-19.tar.xz

Unpack Image: 

tar xf debian-7.8-console-armhf-2015-02-19.tar.xz
cd debian-7.8-console-armhf-2015-02-19

Install Image:

Quick install script for [board] 

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM: 

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image: 

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.02 -b tmp

Stable: 

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Testing: 

./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf

Debian Testing (jessie)

Image Updated:

  • 2015-02-19
    • Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • Beagle/Beagle xM: v3.17.1-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/debian-jessie-console-armhf-2015-02-19.tar.xz

Verify Image with: 

md5sum debian-jessie-console-armhf-2015-02-19.tar.xz
957ebb617a53a662e0fe03f728e0ddcb  debian-jessie-console-armhf-2015-02-19.tar.xz

Unpack image: 

tar xf debian-jessie-console-armhf-2015-02-19.tar.xz
cd debian-jessie-console-armhf-2015-02-19

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC) 

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-02-19
    • BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/flasher/BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with: 

md5sum BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
adbfa79c6748f47e81dd233f06d98b49  BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Follow the "standard" update procedure. 

http://elinux.org/Beagleboard:Updating_The_Software

Linux: 

unxz BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize: 

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • Beagle: xM: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle: v3.17.1-armv7-x3 kernel

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with: 

md5sum bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
7a7e7ec8e299d91cd47eceafb6466725  bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux: 

unxz bb-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bb-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize: 

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • Beagle xM: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle xM: v3.18.1-armv7-x2 kernel
  • 2014-10-29
    • Beagle xM: v3.17.1-armv7-x3 kernel

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with: 

md5sum bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
c75cb5bf8759f201758ba7366b1b573e  bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux: 

unxz bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbxm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize: 

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • BeagleBone/BeagleBone Black: v3.14.22-ti-r31 kernel

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with: 

md5sum bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
9fe135c178c711d554e0dbd75670365b  bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux: 

unxz bone-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bone-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize: 

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
  • 2014-10-29
    • OMAP5432 uEVM: v3.14.22-ti-r31 kernel

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with: 

md5sum omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
bc2b84a2b26037c6364ca0e6855364fe  omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux: 

unxz omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./omap5-uevm-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize: 

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-02-19
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel

Get prebuilt image: 

wget https://rcn-ee.net/rootfs/2015-02-19/microsd/bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Verify Image with: 

md5sum bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
32c5d2a48602b507f1e2038df210631f  bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz

Linux: 

unxz bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img.xz
sudo dd if=./bbx15-debian-7.8-console-armhf-2015-02-19-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add: 

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab, 

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script: 

cd /opt/scripts/tools
git pull

Stable: 

./update_kernel.sh

Testing: 

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net) 

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script: 

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard: 

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black: 

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel): 

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor) 

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install 

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded 

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install... 

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade
Retrieved from "https://elinux.org/index.php?title=BeagleBoardDebian&oldid=374030"