Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Debian Wheezy snapshot: actually 27th...)
m (Debian NetInstall: wheezy -> jessie)
(115 intermediate revisions by 12 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
 
 
*armhf
 
** Port Details: http://wiki.debian.org/ArmHardFloatPort
 
** Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
 
= Help =
 
= Help =
Line 16: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel Stable Kernel 3.2.x src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/linux-dev Development Kernel src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 27: Line 21:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
 
== Debian Squeeze ==
 
  
git clone git://github.com/RobertCNelson/netinstall.git
+
== Debian 8 (jessie) ==
cd netinstall
 
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 
 
"board" Options:
 
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx    - beagle_cx
 
*BeagleBoard xMA/B/C    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax - panda
 
*PandaBoard ES - panda_es
 
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
 
*Options:
 
*Options:
**--uboot : beagle, panda, bone
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
  
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
+
= Demo Image =
  
==Beagleboard: NetInstall==
+
* '''Advanced Users only''': Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.0.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v3.14.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-3.14.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-3.14.y -b tmp
 +
./build_kernel.sh
  
Choose a language
+
== Debian (jessie) ==
  C - No localization
 
  English - English
 
  
Configure the network:
+
Default username/password:
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
*username: debian
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+
*password: temppwd
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Image Updated:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
*2015-04-09
 +
** Beagle/Beagle xM: v4.0.0-rc7-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
 +
** OMAP5432 uEVM: v3.14.37-ti-r57 kernel
 +
** BeagleBoard-X15: v3.14.37-ti-r57 kernel
 +
*2015-02-19
 +
** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
  
  Configuring usb0 network bridge for 2.6.29:
+
Services Active:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
  Note: Depending on your internal network these may work out of the box
  # ifconfig ethX 0.0.0.0
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  # ifconfig usbX 0.0.0.0
+
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
  # brctl addbr brX
+
Getty, Serial Port
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
Continue the install without loading kernel modules? : <yes>
+
Default user: debian pass: temppwd
  
  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Get prebuilt image:
  Logical Volume Manager not available: <Continue>
+
  wget https://rcn-ee.com/rootfs/2015-04-09/debian-jessie-console-armhf-2015-04-09.tar.xz
  
  Partition disks:
+
Verify Image with:
  Guided - Use the largest continuous free space
+
  md5sum debian-jessie-console-armhf-2015-04-09.tar.xz
 +
175879afa16b704f852830ae60ce8071  debian-jessie-console-armhf-2015-04-09.tar.xz
  
  Partitioning scheme....
+
Unpack Image:
 +
  tar xf debian-jessie-console-armhf-2015-04-09.tar.xz
 +
cd debian-jessie-console-armhf-2015-04-09
  
Example:
+
If you don't know the location of your SD card:
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
  sudo ./setup_sdcard.sh --probe-mmc
  >  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
No installable kernel was found in the defined APT sources? :  
+
You should see something like:
  Continue without installing a kernel? : <yes>
 
  
  Standard System
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
 
No BootLoader: <ok>
 
 
 
==Beagleboard: Install Latest Kernel==
 
 
 
Script File:
 
 
 
Lenny:
 
wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
 
sudo /bin/bash install-me.sh
 
 
   
 
   
  Squeeze:
+
  fdisk -l:
  export DIST=squeeze
+
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
  export ARCH=armel
+
  Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  Beagle/Panda
+
  lsblk:
  export BOARD=omap
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
   
+
  sda      8:0    0 465.8G  0 disk
  BeagleBone
+
  ├─sda1  8:1    0 446.9G  0 part / '''<- x86 Root Partition'''
  export BOARD=omap-psp
+
  ├─sda2  8:2    0    1K  0 part
   
+
  └─sda5  8:5    0  18.9G  0 part [SWAP]
  wget http://rcn-ee.net/deb/${DIST}-${ARCH}/LATEST-${BOARD}
+
  sdd      8:48  1  3.7G  0 disk
  wget $(cat ./LATEST-${BOARD} | grep STABLE | awk '{print $3}')
+
├─sdd1  8:49  1    64M  0 part
  /bin/bash install-me.sh
+
  └─sdd2  8:50  1  3.6G  0 part
  
Reboot with your new Kernel
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
= Demo Image =
+
Install Image:
 
 
== Debian Wheezy snapshot ==
 
 
 
Default username/password:  
 
*username: debian
 
*password: temppwd
 
 
 
Default root user/password
 
*user: root
 
*password: root
 
 
 
Image Updated:
 
* September 27th
 
** Beagle/Panda: v3.2.30-x14 kernel
 
** Bone: v3.2.30-psp23 kernel
 
* September 10th
 
** Beagle/Panda: v3.2.28-x14 kernel
 
** Bone: v3.2.28-psp21 kernel (not with "backlight" support for CircuitCo LCD3)
 
*July 29th: 2012-07-29
 
** Beagle/Panda: v3.2.24-x14 kernel
 
** Bone: v3.2.23-psp18 kernel
 
*July 16th: 2012-07-16
 
** Beagle/Panda: v3.2.23-x14 kernel
 
** Bone: v3.2.21-psp16 kernel
 
*June 12th: 2012-06-10
 
** Beagle/Panda: v3.2.19-x13 kernel
 
** Bone: v3.2.18-psp14 kernel (now supports the BeagleBone LCD from CircuitCo)
 
*March 29th: 2012-03-29
 
** Beagle/Panda: v3.2.13-x7 kernel (panda bluetooth now works "sudo apt-get install bluetooth" + "uim" to get all the userspace programs)
 
*** uim: git clone git://gitorious.org/uim/uim.git ; cd uim ; make ; sudo make install
 
add: /etc/udev/rules.d/bluetooth.rules
 
ACTION=="add", SUBSYSTEM=="platform", ENV{MODALIAS}=="platform:kim", RUN+="/sbin/initctl emit enable-ti-bt"
 
** Bone: v3.2.0-psp6 kernel (for users with usb problems, still no good solution yet..)
 
*March 8th: 2012-03-08
 
**Beagle/Panda: fix serial omap regression in v3.2.9 kernel
 
*March 6th: 2012-03-06
 
**Beagle/Panda: v3.2.9 kernel
 
**fixed missing dhclient package (backport from sid)
 
 
 
Services Active:
 
Note: Depending on your internal network these may work out the box
 
Apache, Port 80: http://arm/
 
SSH, Port 22: ssh ubuntu@arm
 
Getty, Serial Port
 
  
Get prebuilt image:
+
Quick install script for [board]
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-minimal-armhf-2012-09-27.tar.xz
+
board options:
mirrors (will take some time to update):
+
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
wget http://ynezz.ibawizard.net/beagleboard/wheezy/debian-wheezy-minimal-armhf-2012-09-27.tar.xz
+
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
 +
*BeagleBoard-X15            - am57xx-beagle-x15
  
Verify Image with:  
+
So for the BeagleBoard xM:
  md5sum debian-wheezy-minimal-armhf-2012-09-27.tar.xz
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
c16bf5446b73548aa8f39e4865fed615  debian-wheezy-minimal-armhf-2012-09-27.tar.xz
 
  
Unpack Image:
+
Advanced: Build Image:
tar xJf debian-wheezy-minimal-armhf-2012-09-27.tar.xz
 
cd debian-wheezy-minimal-armhf-2012-09-27
 
  
Install Image:
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2015.04 -b tmp
  
Quick Install script for "board"
+
Stable:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
 
  
"board" Options:
+
./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx    - beagle_cx
 
*BeagleBoard xMA/B/C    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax - panda
 
*PandaBoard ES - panda_es
 
  
So For the BeagleBoard xM:
+
= Flasher =
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
 
  
*Additional Options
+
== eMMC: BeagleBone Black ==
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
= Debian Configuration =
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
== Serial Ports ==
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Lenny
+
This script will only take about 5-6 Minutes after power on.
  
edit /etc/inittab and add:
+
Notes:
S:2345:respawn:/sbin/getty 115200 ttyS2
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
For root access over the serial port add ttyS2 to /etc/securetty
+
User: debian
 +
pass: temppwd
  
 +
Image Updated:
 +
*2015-04-09
 +
** BeagleBone Black: v3.14.37-ti-r57 kernel
 +
*2015-02-19
 +
** BeagleBone Black: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBone Black: v3.14.26-ti-r43 kernel
  
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-04-09/flasher/BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
Squeeze
+
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
1bde92dc6bd92c681ac9801e5fe3b826  BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
edit /etc/inittab and add:
+
Follow the "standard" update procedure.
  S:2345:respawn:/sbin/getty 115200 ttyO2
+
  http://elinux.org/Beagleboard:Updating_The_Software
  
== WiFi ==
+
Linux:
 +
unxz BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
= raw microSD img =
  
== SGX Video Acceleration ==
+
== BeagleBoard (classic) ==
  
=== SGX armel/armhf v3.4.x+ ===
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
 
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
User: debian
 +
pass: temppwd
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
Auto partition resize:
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  cd /opt/scripts/tools
cd stable-kernel
+
  git pull
  git checkout origin/v3.4.x -b v3.4.x
+
  ./grow_partition.sh
  ./build_kernel.sh (and then follow the directions as the script runs...)
+
sudo reboot
  
Build SGX modules
+
Image Updated:
./sgx_build_modules.sh
+
*2015-04-09
 +
** Beagle: v4.0.0-rc7-armv7-x1 kernel
 +
*2015-02-19
 +
** Beagle: v3.19.0-armv7-x3 kernel
 +
*2015-01-06
 +
** Beagle: v3.18.1-armv7-x2 kernel
  
Insert SD card, make sure to modify MMC in system.sh
+
Get prebuilt image:
  ./tools/install_image.sh
+
  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
Place SD card into Device and boot...
+
Verify Image with:
  cd /opt/sgx
+
  md5sum bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo tar xf GFX_4.06.00.03_libs.tar.gz
+
  aab4b9b028b0d9e983c76e117b9836fb  bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  sudo ./install-sgx.sh
 
  
Reboot, check modules (lsmod):
+
Linux:
  Module                  Size  Used by
+
  unxz bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
bufferclass_ti          5727  0
+
  sudo dd if=./bb-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
omaplfb                11512  0
 
  pvrsrvkm              165208  2 bufferclass_ti,omaplfb
 
  
Blit Test:
+
== BeagleBoard xM ==
ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
 
------------------ SGX 3D Blit test -----------------
 
----------------------- Start -----------------------
 
Call PVRSRVConnect with a valid argument:
 
  OK
 
Get number of devices from PVRSRVEnumerateDevices:
 
  OK
 
.... Reported 1 devices
 
.... Device Number  | Device Type
 
            0000    | PVRSRV_DEVICE_ID_SGX
 
Attempt to acquire device 0:
 
  OK
 
Getting SGX Client info
 
  OK
 
.... ui32ProcessID:1133
 
Display Class API: enumerate devices
 
  OK
 
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
  OK
 
Display Class API: open device
 
  OK
 
Display Class API: Get display info
 
  OK
 
.... Name:PowerVR OMAP Linux Display Driver
 
.... MaxSwapChains:1
 
.... MaxSwapChainBuffers:1
 
.... MinSwapInterval:0
 
.... MaxSwapInterval:1
 
Display Class API: enumerate display formats
 
  OK
 
  OK
 
.... Display format 0 - Pixelformat:1
 
Display Class API: enumerate display dimensions
 
  OK
 
  OK
 
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
Attempt to create memory context for SGX:
 
  OK
 
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
.... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
Display Class API: get the system (primary) buffer
 
  OK
 
Display Class API: map display surface to SGX
 
  OK
 
Attempt to create transfer context for SGX:
 
  OK
 
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
(bottom right quadrant should be red on blue background):
 
  OK
 
  OK
 
Do a SRCCOPY blit to the top left quadrant of the display:
 
(top left quadrant should be striped (r/g/b/w) on blue background):
 
  OK
 
  OK
 
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
(top right quadrant should be yellow):
 
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
  OK
 
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
and then present the RGB565 to the bottom right quadrant of the screen
 
(bottom right quadrant should be a red gradient):
 
  OK
 
  OK
 
  OK
 
  OK
 
Free the off screen surfaces:
 
  OK
 
  OK
 
  OK
 
  OK
 
Destroy the transfer context:
 
  OK
 
Display Class API: unmap display surface from SGX
 
  OK
 
Destroy Device Memory Context
 
Display Class API: close the device
 
  OK
 
Release SGX Client Info:
 
  OK
 
Disconnect from services:
 
  OK
 
------------------ SGX 3D Blit test -----------------
 
------------------------ End ------------------------
 
  
=== SGX Legacy armel only upto v3.2.x ===
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
 
  
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
User: debian
  https://github.com/RobertCNelson/stable-kernel
+
pass: temppwd
  
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
Auto partition resize:
  https://github.com/RobertCNelson/stable-kernel/issues/8
+
  cd /opt/scripts/tools
  oneiric:
+
  git pull
  wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
+
  ./grow_partition.sh
  /bin/bash install-me.sh
+
  sudo reboot
  
==== SDK unPackage Script ====
+
Image Updated:
 +
*2015-04-09
 +
** Beagle xM: v4.0.0-rc7-armv7-x1 kernel
 +
*2015-02-19
 +
** Beagle xM: v3.19.0-armv7-x3 kernel
 +
*2015-01-06
 +
** Beagle xM: v3.18.1-armv7-x2 kernel
  
Download the latest version of the "create_sgx_package.sh" script
+
Get prebuilt image:
2.6.37
+
  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package_2.6.37.sh
 
2.6.38+
 
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package.sh
 
 
 
Make script executable
 
chmod a+x ./create_sgx_package.sh
 
 
 
Run script
 
./create_sgx_package.sh
 
  
After Successfully running:
+
Verify Image with:
 +
md5sum bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
81f60d80a6883c8cd2705deb321d31c8  bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
:~/temp$ ls
+
Linux:
  create_sgx_package.sh
+
  unxz bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  sudo dd if=./bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
==== Beagle: GFX_*_libs.tar.gz ====
+
== BeagleBone/BeagleBone Black ==
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
User: debian
Stopping PVR
+
pass: temppwd
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
Image Updated:
 +
*2015-04-09
 +
** BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
 +
*2015-02-19
 +
** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
  
  tar xf GFX_Linux_SDK.tar.gz
+
Get prebuilt image:
cd GFX_Linux_SDK
+
  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
tar xf OGLES.tar.gz
 
  
==== Test SGX with a DEMO ====
+
Verify Image with:
 +
md5sum bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
ef920fa19a0f5c947fa7f4a32ad99094  bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux:
  ./OGLESEvilSkull
+
  unxz bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
  sudo dd if=./bone-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
  
==== Trouble Shooting ====
+
== OMAP5432 uEVM ==
  
sudo rm /etc/powervr-esrev
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
User: debian
 +
pass: temppwd
  
=== gst-dsp ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
The following Gstreamer elements will be installed:
+
Image Updated:
 +
*2015-04-09
 +
** OMAP5432 uEVM: v3.14.37-ti-r57 kernel
 +
*2015-02-19
 +
** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
  
  $ gst-inspect | grep dsp
+
Get prebuilt image:
  dvdspu: dvdspu: Sub-picture Overlay
+
  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  dsp:  dspdummy: DSP dummy element
 
  dsp:  dspvdec: DSP video decoder
 
  dsp:  dspadec: DSP audio decoder
 
  dsp:  dsph263enc: DSP video encoder
 
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
 
  dsp:  dspjpegenc: DSP video encoder
 
  dsp:  dsph264enc: DSP video encoder
 
  dsp:  dspvpp: DSP VPP filter
 
  dsp:  dspipp: DSP IPP
 
  
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
Verify Image with:
 +
md5sum omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
9e678a83965ed04a4bcbce9238c3d598  omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
Linux:
  voodoo@beagle-xma-512mb:~$ zcat /proc/config.gz | grep TIDSP
+
  unxz omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  CONFIG_TIDSPBRIDGE=m
+
  sudo dd if=./omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
 
# CONFIG_TIDSPBRIDGE_DEBUG is not set
 
CONFIG_TIDSPBRIDGE_RECOVERY=y
 
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
CONFIG_TIDSPBRIDGE_WDT3=y
 
CONFIG_TIDSPBRIDGE_WDT_TIMEOUT=5
 
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
# CONFIG_TIDSPBRIDGE_BACKTRACE is not
 
  
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
== BeagleBoard-X15 ==
  
Download the latest version of the "create_dsp_package.sh" script
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_dsp_package.sh
 
  
for 3.4.x+
+
User: debian
wget https://raw.github.com/RobertCNelson/stable-kernel/v3.4.x/create_dsp_package.sh
+
pass: temppwd
  
Make script executable
+
Auto partition resize:
  chmod a+x ./create_dsp_package.sh
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
Package script:
+
Image Updated:
./create_dsp_package.sh
+
*2015-04-09
 +
** BeagleBoard-X15: v3.14.37-ti-r57 kernel
 +
*2015-02-19
 +
** BeagleBoard-X15: v3.14.33-ti-r50 kernel
 +
*2015-01-06
 +
** BeagleBoard-X15: v3.14.26-ti-r43 kernel
  
Copy DSP_Install_libs.tar.gz to beagle
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
Setup network...
+
Verify Image with:
 +
md5sum bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
bb4b2be6ccbb311f986c2f3da48f17d7  bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
  
Extract:
+
Linux:
  tar xf DSP_Install_libs.tar.gz
+
  unxz bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
 +
sudo dd if=./bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
  
Install
+
= Debian Configuration =
./install-DSP.sh
 
  
Build gst-dsp stuff..
+
== Serial Ports ==
./install-gst-dsp.sh
 
  
Start dspbridge (or just reboot)
+
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
  sudo /etc/init.d/dsp start
+
  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  
Test dspbridge
+
To start a console on the USB ACM device, add the following to /etc/inittab,
  sudo dsp-test
+
  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
  
Playbin:
+
==Install Latest Kernel Image==
sudo gst-launch playbin2 uri=file://(file)
 
  
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
Script:
  Note: seems broken in ubuntu precise armhf...
+
cd /opt/scripts/tools
 +
  git pull
  
  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
Stable:
 +
  ./update_kernel.sh
  
Screenshot: (on my xm it's a little jerky at the moment, investigating..)
+
Testing:
  http://rcn-ee.net/bugs/dsp/dsp_v3.2.1-x2-test.jpg
+
  ./update_kernel.sh --beta-kernel
  
== Xorg omapfb Drivers ==
+
Custom: (has to be on rcn-ee.net)
 +
./update_kernel.sh --kernel v3.8.13-bone69
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
Reboot with your new Kernel Image.
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
== Xorg Drivers ==
  
/etc/X11/xorg.conf:
+
Script:
Section "Device"
+
cd /opt/scripts/tools/
Identifier "Configured Video Device"
+
  git pull
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
BeagleBoard/PandaBoard:
(II) FBDEV: driver for framebuffer: fbdev
+
  cd /opt/scripts/tools/graphics/
  (II) FBDEV(0): using default device
+
  ./ti-omapdrm.sh
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
xvinfo -display :0.0
+
== SGX Drivers ==
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
=== SGX BeagleBone/BeagleBone Black ===
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Lenny:
+
Install sgx modules (3.14.x ti kernel):
  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
sudo depmod -a `uname -r`
 +
  sudo update-initramfs -uk `uname -r`
  
Squeeze/Sid:
+
Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo apt-get install xserver-xorg-video-omap3
+
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
=== xorg.conf ===
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
/etc/X11/xorg.conf
+
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
Section "Monitor"
+
Verify omaplfb & pvrsrvkm loaded
    Identifier "Configured Monitor"
+
  debian@arm:~$ lsmod | grep omaplfb
  EndSection
+
  omaplfb                12065 0
   
+
  pvrsrvkm              178782 1 omaplfb
  Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
  EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
= Building Kernel =
  
cat /var/log/Xorg.0.log | grep omapfb
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
xvinfo -display :0.0
+
== BeagleBone ==
  X-Video Extension version 2.2
+
  http://eewiki.net/display/linuxonarm/BeagleBone
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
https://github.com/RobertCNelson/stable-kernel
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
Download SRC
+
= Upgrading from Debian 5 to Debian 6 =
git clone git://github.com/RobertCNelson/stable-kernel.git
 
  
Build Kernel
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
./build_kernel.sh
 
  
Optional Building Deb File
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
./build_deb.sh
 
  
= Upgrading from Debian 5 to Debian 6 =
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
  
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
+
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 07:17, 10 April 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.0.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-3.14.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-04-09
    • Beagle/Beagle xM: v4.0.0-rc7-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
    • OMAP5432 uEVM: v3.14.37-ti-r57 kernel
    • BeagleBoard-X15: v3.14.37-ti-r57 kernel
  • 2015-02-19
    • Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/debian-jessie-console-armhf-2015-04-09.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2015-04-09.tar.xz
175879afa16b704f852830ae60ce8071  debian-jessie-console-armhf-2015-04-09.tar.xz

Unpack Image:

tar xf debian-jessie-console-armhf-2015-04-09.tar.xz
cd debian-jessie-console-armhf-2015-04-09

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.04 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-04-09
    • BeagleBone Black: v3.14.37-ti-r57 kernel
  • 2015-02-19
    • BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone Black: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/flasher/BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
1bde92dc6bd92c681ac9801e5fe3b826  BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-04-09
    • Beagle: v4.0.0-rc7-armv7-x1 kernel
  • 2015-02-19
    • Beagle: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle: v3.18.1-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
aab4b9b028b0d9e983c76e117b9836fb  bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bb-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-04-09
    • Beagle xM: v4.0.0-rc7-armv7-x1 kernel
  • 2015-02-19
    • Beagle xM: v3.19.0-armv7-x3 kernel
  • 2015-01-06
    • Beagle xM: v3.18.1-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
81f60d80a6883c8cd2705deb321d31c8  bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-04-09
    • BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
  • 2015-02-19
    • BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
ef920fa19a0f5c947fa7f4a32ad99094  bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bone-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-04-09
    • OMAP5432 uEVM: v3.14.37-ti-r57 kernel
  • 2015-02-19
    • OMAP5432 uEVM: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • OMAP5432 uEVM: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
9e678a83965ed04a4bcbce9238c3d598  omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-04-09
    • BeagleBoard-X15: v3.14.37-ti-r57 kernel
  • 2015-02-19
    • BeagleBoard-X15: v3.14.33-ti-r50 kernel
  • 2015-01-06
    • BeagleBoard-X15: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
bb4b2be6ccbb311f986c2f3da48f17d7  bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade