Revision as of 07:17, 10 April 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees
  - v3.17.x kernel branch
  - Development Kernel source code

When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
  - Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

http://beagleboard.org/source

Recommended Beagle Software

Mainline U-Boot:

All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie

Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port

Demo Image

Advanced Users only: Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.0.x -b tmp
./build_kernel.sh

Advanced Users only: BeagleBone/BeagleBone Black: Kernel v3.14.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-3.14.y

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-3.14.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

username: debian
password: temppwd

Image Updated:

2015-04-09
- Beagle/Beagle xM: v4.0.0-rc7-armv7-x1 kernel
- BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
- OMAP5432 uEVM: v3.14.37-ti-r57 kernel
- BeagleBoard-X15: v3.14.37-ti-r57 kernel
2015-02-19
- Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
- BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
- OMAP5432 uEVM: v3.14.33-ti-r50 kernel
- BeagleBoard-X15: v3.14.33-ti-r50 kernel
2015-01-06
- Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
- BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
- OMAP5432 uEVM: v3.14.26-ti-r43 kernel
- BeagleBoard-X15: v3.14.26-ti-r43 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/debian-jessie-console-armhf-2015-04-09.tar.xz

Verify Image with:

md5sum debian-jessie-console-armhf-2015-04-09.tar.xz
175879afa16b704f852830ae60ce8071  debian-jessie-console-armhf-2015-04-09.tar.xz

Unpack Image:

tar xf debian-jessie-console-armhf-2015-04-09.tar.xz
cd debian-jessie-console-armhf-2015-04-09

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part

In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
BeagleBoard xM - omap3-beagle-xm
BeagleBone/Black - beaglebone
OMAP5432 uEVM - omap5-uevm
BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.04 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2015-04-09
- BeagleBone Black: v3.14.37-ti-r57 kernel
2015-02-19
- BeagleBone Black: v3.14.33-ti-r50 kernel
2015-01-06
- BeagleBone Black: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/flasher/BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
1bde92dc6bd92c681ac9801e5fe3b826  BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Follow the "standard" update procedure.

http://elinux.org/Beagleboard:Updating_The_Software

Linux:

unxz BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-04-09
- Beagle: v4.0.0-rc7-armv7-x1 kernel
2015-02-19
- Beagle: v3.19.0-armv7-x3 kernel
2015-01-06
- Beagle: v3.18.1-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
aab4b9b028b0d9e983c76e117b9836fb  bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bb-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-04-09
- Beagle xM: v4.0.0-rc7-armv7-x1 kernel
2015-02-19
- Beagle xM: v3.19.0-armv7-x3 kernel
2015-01-06
- Beagle xM: v3.18.1-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
81f60d80a6883c8cd2705deb321d31c8  bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-04-09
- BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
2015-02-19
- BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
2015-01-06
- BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
ef920fa19a0f5c947fa7f4a32ad99094  bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bone-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-04-09
- OMAP5432 uEVM: v3.14.37-ti-r57 kernel
2015-02-19
- OMAP5432 uEVM: v3.14.33-ti-r50 kernel
2015-01-06
- OMAP5432 uEVM: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
9e678a83965ed04a4bcbce9238c3d598  omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2015-04-09
- BeagleBoard-X15: v3.14.37-ti-r57 kernel
2015-02-19
- BeagleBoard-X15: v3.14.33-ti-r50 kernel
2015-01-06
- BeagleBoard-X15: v3.14.26-ti-r43 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Verify Image with:

md5sum bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
bb4b2be6ccbb311f986c2f3da48f17d7  bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz

Linux:

unxz bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
sudo dd if=./bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX

Debian Configuration

Serial Ports

To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:

T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102

To start a console on the USB ACM device, add the following to /etc/inittab,

GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x ti kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

@@ Line 3: / Line 3: @@
 [[Category:Development Boards]]
 [[Category: BeagleBoard]]
-This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
-Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
-*armhf
-** Port Details: http://wiki.debian.org/ArmHardFloatPort
-** Status: http://wiki.debian.org/ArmHardFloatTodo
 = Help =
@@ Line 16: / Line 10: @@
 *Kernel related help:
-** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
-** Kernel Tree's
+** Kernel Trees
-*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.7.x Stable (3.7.x) branch]
+*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
 *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
@@ Line 27: / Line 21: @@
 ** pastebin dmesg
 *** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
+= Official BeagleBoard.org Images for shipping with BeagleBone Black =
+* http://beagleboard.org/source
 = Recommended Beagle Software =
@@ Line 38: / Line 35: @@
 Scripts:
-  git clone git://github.com/RobertCNelson/netinstall.git
+  git clone https://github.com/RobertCNelson/netinstall.git
   cd netinstall
 Device Options:
-  BeagleBoard --uboot beagle_cx
+  BeagleBoard --dtb omap3-beagle
-  BeagleBoard xM --uboot beagle_xm
+  BeagleBoard xM --dtb omap3-beagle-xm
-  BeagleBone (serial) --uboot bone-serial
+  BeagleBone (serial) --dtb am335x-bone-serial
-  BeagleBone (video via cape) --uboot bone-video
+  BeagleBone (video via cape) --dtb am335x-bone-video
   BeagleBone Black --dtb am335x-boneblack
-  PandaBoard --uboot panda
+  PandaBoard (A1->A3) --dtb omap4-panda
-  PandaBoard ES  --uboot panda_es
+ PandaBoard (A4->Ax) --dtb omap4-panda-a4
+  PandaBoard ES  --dtb omap4-panda-es
 You will need a 1GB SD card or greater.
   Standard System : ~455MB
- + Desktop environment (GNOME) : ~2.9GB
-== Debian Wheezy ==
+== Debian 8 (jessie) ==
 Quick Install script for "board"
-  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro wheezy-armhf
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 So For the BeagleBoard xM:
-  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro wheezy-armhf
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 *Options:
@@ Line 66: / Line 63: @@
 **--serial-mode : debian-installer uses Serial Port
-NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
+= Demo Image =
-==Beagleboard: NetInstall==
+* '''Advanced Users only''': Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
+ git clone https://github.com/RobertCNelson/armv7-multiplatform.git
- Choose a language
+ cd armv7-multiplatform
-  C - No localization
+ git checkout origin/v4.0.x -b tmp
-  English - English
+  ./build_kernel.sh
+* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v3.14.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-3.14.y
- Configure the network:
+  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
-  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+  cd ti-linux-kernel-dev
-  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+  git checkout origin/ti-linux-3.14.y -b tmp
-  eth0: Ethernet <- Your usb-ethernet device
+  ./build_kernel.sh
-  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
-===usb0 howto===
-There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
-  Configuring usb0 network bridge for 2.6.29:
-  While you chose your keyboard layout, setup a bridge with ethX and usbX.
-   # ifconfig ethX 0.0.0.0
-   # ifconfig usbX 0.0.0.0
-   # brctl addbr brX
-   # brctl addif brX ethX
-   # brctl addif brX usbX
-   # ifconfig brX up
-   # dhclient brX
-  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
- Continue the install without loading kernel modules? : <yes>
-  Partition disks: This partitioner doesn't have the inform.....? : <yes>
-  Logical Volume Manager not available: <Continue>
-  Partition disks:
-  Guided - Use the largest continuous free space
-  Partitioning scheme....
-Example:
-  MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
- >  #1 primary  57.5 MB     fat32
-  >  #2 primary   1.8 GB B f ext3  /
- >  #5 logical 148.0 MB   f swap  swap
- Finish partitioning and write changes to disk
-  Write the changes to disk? : <yes>
- No installable kernel was found in the defined APT sources? :
-  Continue without installing a kernel? : <yes>
- Standard System
- No BootLoader: <ok>
+== Debian (jessie) ==
-= Demo Image =
+Default username/password:
-== Debian Wheezy snapshot ==
-Default username/password:
 *username: debian
 *password: temppwd
-Default root user/password
-*user: root
-*password: root
 Image Updated:
-*2013-04-26
+*2015-04-09
-** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
+** Beagle/Beagle xM: v4.0.0-rc7-armv7-x1 kernel
-** BeagleBone: v3.2.42-psp27 kernel
+** BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
-** BeagleBone/BeagleBone Black: v3.8.8-bone14 kernel (--uboot bone_dtb)
+** OMAP5432 uEVM: v3.14.37-ti-r57 kernel
-*2013-03-28:
+** BeagleBoard-X15: v3.14.37-ti-r57 kernel
-** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
+*2015-02-19
-** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
+** Beagle/Beagle xM: v3.19.0-armv7-x3 kernel
-*2013-02-16:
+** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
-** Beagle/Panda/Panda ES: v3.7.8-x8 kernel
+** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
-** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8-rc7-bone4)
+** BeagleBoard-X15: v3.14.33-ti-r50 kernel
+*2015-01-06
+** Beagle/Beagle xM: v3.18.1-armv7-x2 kernel
+** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
+** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
+** BeagleBoard-X15: v3.14.26-ti-r43 kernel
 Services Active:
-  Note: Depending on your internal network these may work out the box
+  Note: Depending on your internal network these may work out of the box
-  Apache, Port 80: http://arm/
+  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
-  SSH, Port 22: ssh ubuntu@arm
+  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
   Getty, Serial Port
+Default user: debian pass: temppwd
 Get prebuilt image:
+ wget https://rcn-ee.com/rootfs/2015-04-09/debian-jessie-console-armhf-2015-04-09.tar.xz
- wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-console-armhf-2013-04-26.tar.xz
+Verify Image with:
+  md5sum debian-jessie-console-armhf-2015-04-09.tar.xz
-Verify Image with:
+afa16b704f852830ae60ce8071  debian-jessie-console-armhf-2015-04-09.tar.xz
-  md5sum debian-wheezy-console-armhf-2013-04-26.tar.xz
-a1c4ff53f3b2a42419ee1c7c1f47e40  debian-wheezy-console-armhf-2013-04-26.tar.xz
 Unpack Image:
-  tar xJf debian-wheezy-console-armhf-2013-04-26.tar.xz
+  tar xf debian-jessie-console-armhf-2015-04-09.tar.xz
-  cd debian-wheezy-console-armhf-2013-04-26
+  cd debian-jessie-console-armhf-2015-04-09
-Install Image:
+If you don't know the location of your SD card:
+ sudo ./setup_sdcard.sh --probe-mmc
-Quick Install script for "board"
+You should see something like:
- sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
-"board" options:
+ Are you sure? I don't see [/dev/idontknow], here is what I do see...
-*BeagleBoard Ax/Bx    - beagle_bx
-*BeagleBoard Cx/Dx    - beagle_cx
+ fdisk -l:
-*BeagleBoard xM       - beagle_xm
+ Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
-*BeagleBone Ax        - bone
+ Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
-*BeagleBone/Black     - bone_dtb
-*PandaBoard Ax        - panda
+ lsblk:
-*PandaBoard ES        - panda_es
+ NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
+ sda      8:0    0 465.8G  0 disk
-So For the BeagleBoard xM:
+ ├─sda1   8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
-  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+ ├─sda2   8:2    0     1K  0 part
+ └─sda5   8:5    0  18.9G  0 part [SWAP]
+ sdd      8:48   1   3.7G  0 disk
+ ├─sdd1   8:49   1    64M  0 part
+  └─sdd2   8:50   1   3.6G  0 part
-*Additional Options
+* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
-** --rootfs <ext4 default>
-** --swap_file <swap file size in MB's>
-** --addon pico <ti pico projector>
-** --svideo-ntsc <use ntsc over dvi for video)
-** --svideo-pal <use pal over dvi for video)
-= Debian Configuration =
+Install Image:
-== Serial Ports ==
+Quick install script for [board]
+ sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
-Lenny
+board options:
+*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
+*BeagleBoard xM             - omap3-beagle-xm
+*BeagleBone/Black           - beaglebone
+*OMAP5432 uEVM              - omap5-uevm
+*BeagleBoard-X15            - am57xx-beagle-x15
-edit /etc/inittab and add:
+So for the BeagleBoard xM:
-  S:2345:respawn:/sbin/getty 115200 ttyS2
+  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
-For root access over the serial port add ttyS2 to /etc/securetty
+Advanced: Build Image:
+ git clone https://github.com/RobertCNelson/omap-image-builder.git
+ cd omap-image-builder
+ git checkout v2015.04 -b tmp
+Stable:
-Squeeze
+ ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
-edit /etc/inittab and add:
+= Flasher =
- S:2345:respawn:/sbin/getty 115200 ttyO2
-== WiFi ==
+== eMMC: BeagleBone Black ==
-See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
-== SGX Video Acceleration ==
+Script for reference: (this is the script that writes to the eMMC)
+ https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
-=== SGX armel/armhf v3.4.x+ ===
+This script will only take about 5-6 Minutes after power on.
-* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
-* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+Notes:
+* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
+* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
-==== Re-Build Kernel and SGX Kernel Modules ====
+User: debian
- git clone git://github.com/RobertCNelson/stable-kernel.git
+pass: temppwd
- cd stable-kernel
- git checkout origin/v3.6.x -b v3.6.x
- ./build_kernel.sh (and then follow the directions as the script runs...)
-Build kernel
+Image Updated:
- ./build_kernel.sh
+*2015-04-09
+** BeagleBone Black: v3.14.37-ti-r57 kernel
+*2015-02-19
+** BeagleBone Black: v3.14.33-ti-r50 kernel
+*2015-01-06
+** BeagleBone Black: v3.14.26-ti-r43 kernel
-Build SGX modules
+Get prebuilt image:
-  ./sgx_build_modules.sh
+  wget https://rcn-ee.com/rootfs/2015-04-09/flasher/BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-Insert SD card, make sure to modify MMC in system.sh
+Verify Image with:
-  ./tools/install_image.sh
+ md5sum BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+bde92dc6bd92c681ac9801e5fe3b826  BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-Place SD card into the device and boot...
+Follow the "standard" update procedure.
-  cd /opt/sgx
+  http://elinux.org/Beagleboard:Updating_The_Software
- sudo tar xf GFX_4.0*_libs.tar.gz
- sudo ./install-sgx.sh
-Reboot, check modules (lsmod):
+Linux:
-  Module                  Size  Used by
+  unxz BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
- bufferclass_ti          5727  0
+  sudo dd if=./BBB-eMMC-flasher-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
- omaplfb                11512  0
-  pvrsrvkm              165208  2 bufferclass_ti,omaplfb
-Blit Test:
+= raw microSD img =
- ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
- ------------------ SGX 3D Blit test -----------------
- ----------------------- Start -----------------------
- Call PVRSRVConnect with a valid argument:
-  OK
- Get number of devices from PVRSRVEnumerateDevices:
-  OK
- .... Reported 1 devices
- .... Device Number  | Device Type
-    | PVRSRV_DEVICE_ID_SGX
- Attempt to acquire device 0:
-  OK
- Getting SGX Client info
-  OK
- .... ui32ProcessID:1133
- Display Class API: enumerate devices
-  OK
- PVRSRVEnumerateDeviceClass() returns 1 display device(s)
-  OK
- Display Class API: open device
-  OK
- Display Class API: Get display info
-  OK
- .... Name:PowerVR OMAP Linux Display Driver
- .... MaxSwapChains:1
- .... MaxSwapChainBuffers:1
- .... MinSwapInterval:0
- .... MaxSwapInterval:1
- Display Class API: enumerate display formats
-  OK
-  OK
- .... Display format 0 - Pixelformat:1
- Display Class API: enumerate display dimensions
-  OK
-  OK
- .... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
- Attempt to create memory context for SGX:
-  OK
- .... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
- .... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
- .... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
- .... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
- .... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
- .... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
- .... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
- .... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
- .... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
- .... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
- .... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
- Display Class API: get the system (primary) buffer
-  OK
- Display Class API: map display surface to SGX
-  OK
- Attempt to create transfer context for SGX:
-  OK
- Do a SRCCOPY blit to the bottom right quadrant of the display:
- (bottom right quadrant should be red on blue background):
-  OK
-  OK
- Do a SRCCOPY blit to the top left quadrant of the display:
- (top left quadrant should be striped (r/g/b/w) on blue background):
-  OK
-  OK
- Do a CUSTOMSHADER blit to the top right quadrant of the display:
- (top right quadrant should be yellow):
-xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
-xb6acb000 (host) 0xf408000 (device): Device mem for texture
- USE custom shader program: 0x28841001.c0000000	mov.end o0, sa0
-  OK
- Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
- and then present the RGB565 to the bottom right quadrant of the screen
- (bottom right quadrant should be a red gradient):
-  OK
-  OK
-  OK
-  OK
- Free the off screen surfaces:
-  OK
-  OK
-  OK
-  OK
- Destroy the transfer context:
-  OK
- Display Class API: unmap display surface from SGX
-  OK
- Destroy Device Memory Context
- Display Class API: close the device
-  OK
- Release SGX Client Info:
-  OK
- Disconnect from services:
-  OK
- ------------------ SGX 3D Blit test -----------------
- ------------------------ End ------------------------
-=== SGX Legacy armel only upto v3.2.x ===
+== BeagleBoard (classic) ==
-NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
-Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
-  https://github.com/RobertCNelson/stable-kernel
-Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+User: debian
- https://github.com/RobertCNelson/stable-kernel/issues/8
+pass: temppwd
- oneiric:
- wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
- /bin/bash install-me.sh
-==== SDK unPackage Script ====
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
-Download the latest version of the "create_sgx_package.sh" script
+Image Updated:
-.6.37
+*2015-04-09
- wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
+** Beagle: v4.0.0-rc7-armv7-x1 kernel
-.6.38->3.2.x
+*2015-02-19
- wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
+** Beagle: v3.19.0-armv7-x3 kernel
+*2015-01-06
+** Beagle: v3.18.1-armv7-x2 kernel
-Make script executable
+Get prebuilt image:
-  chmod a+x ./create_sgx_package_*.sh
+  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-Run script
+Verify Image with:
-  ./create_sgx_package_*.sh
+  md5sum bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+ aab4b9b028b0d9e983c76e117b9836fb  bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-After Successfully running:
+Linux:
+ unxz bb-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+ sudo dd if=./bb-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
- :~/temp$ ls
+== BeagleBoard xM ==
- create_sgx_package.sh
- GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
- GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
- Graphics_SDK_setuplinux_X_XX_XX_XX.bin
- SDK
- SDK_BIN
-==== Beagle: GFX_*_libs.tar.gz ====
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
- tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+User: debian
- ./install-SGX.sh (copies necessary SGX libs and startup script)
+pass: temppwd
- ./run-SGX.sh (force run the new init script, or you can just reboot...)
-On successful install:
+Auto partition resize:
-  Stopping PVR
+  cd /opt/scripts/tools
-  Starting PVR
+  git pull
-  Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
+  ./grow_partition.sh
-Reboot for good measure
   sudo reboot
-==== Beagle: GFX_Linux_SDK.tar.gz ====
+Image Updated:
+*2015-04-09
+** Beagle xM: v4.0.0-rc7-armv7-x1 kernel
+*2015-02-19
+** Beagle xM: v3.19.0-armv7-x3 kernel
+*2015-01-06
+** Beagle xM: v3.18.1-armv7-x2 kernel
-  tar xf GFX_Linux_SDK.tar.gz
+Get prebuilt image:
- cd GFX_Linux_SDK
+  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
- tar xf OGLES.tar.gz
-==== Test SGX with a DEMO ====
+Verify Image with:
+ md5sum bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+f60d80a6883c8cd2705deb321d31c8  bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+Linux:
-  ./OGLESEvilSkull
+  unxz bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+  sudo dd if=./bbxm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
-==== Trouble Shooting ====
+== BeagleBone/BeagleBone Black ==
- sudo rm /etc/powervr-esrev
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
- sudo depmod -a omaplfb
- sudo /etc/init.d/pvr restart
-== DSP ==
+User: debian
+pass: temppwd
-=== gst-dsp ===
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
-The following Gstreamer elements will be installed:
+Image Updated:
+*2015-04-09
+** BeagleBone/BeagleBone Black: v3.14.37-ti-r57 kernel
+*2015-02-19
+** BeagleBone/BeagleBone Black: v3.14.33-ti-r50 kernel
+*2015-01-06
+** BeagleBone/BeagleBone Black: v3.14.26-ti-r43 kernel
-  $ gst-inspect | grep dsp
+Get prebuilt image:
-  dvdspu:  dvdspu: Sub-picture Overlay
+  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-  dsp:  dspdummy: DSP dummy element
-  dsp:  dspvdec: DSP video decoder
-  dsp:  dspadec: DSP audio decoder
-  dsp:  dsph263enc: DSP video encoder
-  dsp:  dspmp4venc: DSP MPEG-4 video encoder
-  dsp:  dspjpegenc: DSP video encoder
-  dsp:  dsph264enc: DSP video encoder
-  dsp:  dspvpp: DSP VPP filter
-  dsp:  dspipp: DSP IPP
-Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+Verify Image with:
+ md5sum bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+ ef920fa19a0f5c947fa7f4a32ad99094  bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+Linux:
-  ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+ unxz bone-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
- CONFIG_TIDSPBRIDGE=m
+  sudo dd if=./bone-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
- CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
- CONFIG_TIDSPBRIDGE_RECOVERY=y
- # CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
- # CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
- # CONFIG_TIDSPBRIDGE_BACKTRACE is not set
-On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+== OMAP5432 uEVM ==
-Download the latest version of the "create_dsp_package.sh" script
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
- wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
-Make script executable
+User: debian
- chmod a+x ./create_dsp_package.sh
+pass: temppwd
-Package script:
+Auto partition resize:
-  ./create_dsp_package.sh
+ cd /opt/scripts/tools
+ git pull
+  ./grow_partition.sh
+ sudo reboot
-Copy DSP_Install_libs.tar.gz to Beagle
+Image Updated:
+*2015-04-09
+** OMAP5432 uEVM: v3.14.37-ti-r57 kernel
+*2015-02-19
+** OMAP5432 uEVM: v3.14.33-ti-r50 kernel
+*2015-01-06
+** OMAP5432 uEVM: v3.14.26-ti-r43 kernel
-Setup network...
+Get prebuilt image:
+ wget https://rcn-ee.com/rootfs/2015-04-09/microsd/omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-Extract:
+Verify Image with:
-  ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
+  md5sum omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+e678a83965ed04a4bcbce9238c3d598  omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-Install:
+Linux:
-  ubuntu@arm:~$ ./install-DSP.sh
+  unxz omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+ sudo dd if=./omap5-uevm-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
-What got installed:
+== BeagleBoard-X15 ==
- ubuntu@arm:~$ ls -lh /lib/dsp/
- total 7.1M
- -rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
- -rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
- -rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
- -rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
- -rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
- -rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
- -rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
- -rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
- -rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
- -rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
- -rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
- -rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
- -rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
- -rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
-Building gst-dsp stuff:
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
-If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+User: debian
+pass: temppwd
-Update arm tools directory to the latest:
+Auto partition resize:
-  ubuntu@arm:~$ cd /boot/uboot/tools/
+  cd /opt/scripts/tools
-  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+  git pull
+ ./grow_partition.sh
+ sudo reboot
-Otherwise, install via git:
+Image Updated:
- git clone git://github.com/RobertCNelson/tools.git
+*2015-04-09
+** BeagleBoard-X15: v3.14.37-ti-r57 kernel
+*2015-02-19
+** BeagleBoard-X15: v3.14.33-ti-r50 kernel
+*2015-01-06
+** BeagleBoard-X15: v3.14.26-ti-r43 kernel
-Change to the pkgs directory
+Get prebuilt image:
-  ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
+  wget https://rcn-ee.com/rootfs/2015-04-09/microsd/bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
- (or if just cloned)
- ubuntu@arm:~$ cd ~/tools/pkgs
-Build gst-dsp stuff..
+Verify Image with:
-  ./ti-tidspbridge.sh
+ md5sum bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+  bb4b2be6ccbb311f986c2f3da48f17d7  bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
-Start dspbridge (or just reboot)
+Linux:
-  sudo /etc/init.d/dsp_init start
+ unxz bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img.xz
+  sudo dd if=./bbx15-debian-jessie-console-armhf-2015-04-09-2gb.img of=/dev/sdX
-Test dspbridge
+= Debian Configuration =
- sudo dsp-test
-Playbin:
+== Serial Ports ==
- sudo gst-launch playbin2 uri=file://(file)
-Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
-  Note: it seems broken in Ubuntu precise armhf...
+  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
-  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+To start a console on the USB ACM device, add the following to /etc/inittab,
+  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
-== Xorg omapfb Drivers ==
+==Install Latest Kernel Image==
-By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+Script:
+ cd /opt/scripts/tools
+ git pull
-Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+Stable:
+ ./update_kernel.sh
-/etc/X11/xorg.conf:
+Testing:
-  Section "Device"
+  ./update_kernel.sh --beta-kernel
- 	Identifier	"Configured Video Device"
- 	Option		"UseFBDev"		"true"
- 	Driver		"fbdev"
- EndSection
-cat /var/log/Xorg.0.log | grep FBDEV
+Custom: (has to be on rcn-ee.net)
- (II) FBDEV: driver for framebuffer: fbdev
+  ./update_kernel.sh --kernel v3.8.13-bone69
- (II) FBDEV(0): using default device
-  (II) FBDEV(0): Creating default Display subsection in Screen section
- (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
- (==) FBDEV(0): RGB weight 565
-Login into Debian and open a new terminal, xorg has to be running..
+Reboot with your new Kernel Image.
-xvinfo -display :0.0
+== Xorg Drivers ==
- X-Video Extension version 2.2
- screen #0
-  no adaptors present
-=== Drivers ===
+Script:
+ cd /opt/scripts/tools/
+ git pull
-Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+BeagleBoard/PandaBoard:
+ cd /opt/scripts/tools/graphics/
+  ./ti-omapdrm.sh
-Lenny:
+BeagleBone/BeagleBone Black:
-  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+  cd /opt/scripts/tools/graphics/
-  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+  ./ti-tilcdc.sh
-Squeeze/Sid:
+== SGX Drivers ==
- sudo apt-get install xserver-xorg-video-omap3
-=== xorg.conf ===
+=== SGX BeagleBone/BeagleBone Black ===
-/etc/X11/xorg.conf
- Section "Monitor"
+Note, these are FBDEV only, no xorg/x11/etc...
-     Identifier "Configured Monitor"
- EndSection
- Section "Screen"
-     Identifier "Default Screen"
-     Device "Configured Video Device"
-     #Limited by SGX?
-     DefaultDepth 16
- EndSection
- Section "Device"
-     Identifier "Configured Video Device"
-     Driver "omapfb"
-     Option "fb" "/dev/fb0"
- EndSection
-To verify it was correctly installed, reboot and:
+Install sgx modules (3.14.x ti kernel):
+ sudo apt-get install ti-sgx-es8-modules-`uname -r`
+ sudo depmod -a `uname -r`
+ sudo update-initramfs -uk `uname -r`
-cat /var/log/Xorg.0.log | grep omapfb
+Build SGX userspace (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
- (II) LoadModule: "omapfb"
+  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
- (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
+  cd ti-linux-kernel-dev/
- (II) Module omapfb: vendor="X.Org Foundation"
+  git checkout origin/ti-linux-3.14.y -b tmp-sgx
-  (II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
+  ./sgx_create_package.sh
- (WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
-  (II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
- (II) omapfb(0): Creating default Display subsection in Screen section
- (**) omapfb(0): Depth 16, (--) framebuffer bpp 16
-  (==) omapfb(0): RGB weight 565
- (==) omapfb(0): Default visual is TrueColor
- (--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
- (**) omapfb(0):  Built-in mode "current"
-  (==) omapfb(0): DPI set to (96, 96)
- (II) omapfb(0): DPMS enabled
- (II) omapfb(0): Video plane capabilities:
- (II) omapfb(0): Video plane supports the following image formats:
- (II) omapfb(0): XVideo extension initialized
-Login into Debian and open a new terminal, xorg has to be running..
+Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
+ sudo tar xfv GFX_5.01.01.02.tar.gz -C /
+ cd /opt/gfxinstall/
+ sudo ./sgx-install.sh
+ sudo reboot
-xvinfo -display :0.0
+Verify omaplfb & pvrsrvkm loaded
-  X-Video Extension version 2.2
+ debian@arm:~$ lsmod | grep omaplfb
-  screen #0
+  omaplfb                12065  0
-   Adaptor #0: "OMAP XV adaptor"
+ pvrsrvkm              178782  1 omaplfb
-     number of ports: 1
-     port base: 56
-     operations supported: PutImage
-     supported visuals:
-       depth 16, visualID 0x21
-     number of attributes: 1
-     etc..
-== Building Kernel ==
+= Building Kernel =
 Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
-=== Beagle/Beagle xM ===
+== Beagle/Beagle xM ==
   http://eewiki.net/display/linuxonarm/BeagleBoard
-=== BeagleBone ===
+== BeagleBone ==
   http://eewiki.net/display/linuxonarm/BeagleBone
-=== Panda/Panda ES ===
+== BeagleBone Black ==
+ http://eewiki.net/display/linuxonarm/BeagleBone+Black
+== Panda/Panda ES ==
   http://eewiki.net/display/linuxonarm/PandaBoard

Difference between revisions of "BeagleBoardDebian"

Revision as of 07:17, 10 April 2015

Contents

Help

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Debian NetInstall

Debian 8 (jessie)

Demo Image

Debian (jessie)

Flasher

eMMC: BeagleBone Black

raw microSD img

BeagleBoard (classic)

BeagleBoard xM

BeagleBone/BeagleBone Black

OMAP5432 uEVM

BeagleBoard-X15

Debian Configuration

Serial Ports

Install Latest Kernel Image

Xorg Drivers

SGX Drivers

SGX BeagleBone/BeagleBone Black

Building Kernel

Beagle/Beagle xM

BeagleBone

BeagleBone Black

Panda/Panda ES

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Navigation menu

Search