Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Debian NetInstall: for may 5th..)
m (md5sums)
(105 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
 
 
*armhf
 
** Port Details: http://wiki.debian.org/ArmHardFloatPort
 
** Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
 
= Help =
 
= Help =
Line 16: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.7.x Stable (3.7.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 27: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
Line 36: Line 34:
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
  
 
Device Options:
 
Device Options:
  BeagleBoard --uboot beagle_cx
+
  BeagleBoard --dtb omap3-beagle
  BeagleBoard xM --uboot beagle_xm
+
  BeagleBoard xM --dtb omap3-beagle-xm
  BeagleBone (serial) --uboot bone-serial
+
  BeagleBone (serial) --dtb am335x-bone-serial
  BeagleBone (video via cape) --uboot bone-video
+
  BeagleBone (video via cape) --dtb am335x-bone-video
 
  BeagleBone Black --dtb am335x-boneblack
 
  BeagleBone Black --dtb am335x-boneblack
  PandaBoard --uboot panda
+
  PandaBoard (A1->A3) --dtb omap4-panda
  PandaBoard ES  --uboot panda_es
+
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
  PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Wheezy ==
+
== Debian 8 (jessie) ==
 
 
git clone git://github.com/RobertCNelson/netinstall.git
 
cd netinstall
 
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
 
*Options:
 
*Options:
Line 65: Line 64:
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
  
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
+
= Demo Image =
  
==Beagleboard: NetInstall==
+
* '''Advanced Users only''': Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.1.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.1.y -b tmp
 +
./build_kernel.sh
  
Choose a language
+
== Debian (jessie) ==
  C - No localization
 
  English - English
 
  
Configure the network:
+
Default username/password:
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
*username: debian
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+
*password: temppwd
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Image Updated:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
*2015-07-08
 +
** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
 +
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
 +
*2015-05-08
 +
** Beagle/Beagle xM: v4.0.2-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.41-ti-r63 kernel
 +
** OMAP5432 uEVM: v3.14.41-ti-r63 kernel
 +
** BeagleBoard-X15: v3.14.41-ti-r63 kernel
  
  Configuring usb0 network bridge for 2.6.29:
+
Services Active:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
  Note: Depending on your internal network these may work out of the box
  # ifconfig ethX 0.0.0.0
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  # ifconfig usbX 0.0.0.0
+
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
  # brctl addbr brX
+
Getty, Serial Port
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
Continue the install without loading kernel modules? : <yes>
+
Default user: debian pass: temppwd
  
  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Get prebuilt image:
  Logical Volume Manager not available: <Continue>
+
  wget https://rcn-ee.com/rootfs/2015-07-08/debian-8.1-console-armhf-2015-07-08.tar.xz
  
  Partition disks:
+
Verify Image with:
  Guided - Use the largest continuous free space
+
  md5sum debian-8.1-console-armhf-2015-07-08.tar.xz
 +
7cdb18fc781a89e0b6355e515efb8af8  debian-8.1-console-armhf-2015-07-08.tar.xz
  
  Partitioning scheme....
+
Unpack Image:
 +
  tar xf debian-8.1-console-armhf-2015-07-08.tar.xz
 +
cd debian-8.1-console-armhf-2015-07-08
  
Example:
+
If you don't know the location of your SD card:
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
  sudo ./setup_sdcard.sh --probe-mmc
  >  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
No installable kernel was found in the defined APT sources? :  
+
You should see something like:
  Continue without installing a kernel? : <yes>
 
  
  Standard System
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
No BootLoader: <ok>
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
= Demo Image =
+
Install Image:
 
 
== Debian Wheezy snapshot ==
 
  
Default username/password:
+
Quick install script for [board]
*username: debian
+
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
*password: temppwd
 
  
Default root user/password
+
board options:
*user: root
+
*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
*password: root
+
*BeagleBoard xM            - omap3-beagle-xm
 +
*BeagleBone/Black          - beaglebone
 +
*OMAP5432 uEVM              - omap5-uevm
 +
*BeagleBoard-X15            - am57xx-beagle-x15
  
Image Updated:
+
So for the BeagleBoard xM:
*2013-04-26
+
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
 
** BeagleBone: v3.2.42-psp27 kernel
 
** BeagleBone/BeagleBone Black: v3.8.8-bone14 kernel (--uboot bone_dtb)
 
*2013-03-28:
 
** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
 
** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
 
*2013-02-16:
 
** Beagle/Panda/Panda ES: v3.7.8-x8 kernel
 
** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8-rc7-bone4)
 
  
Services Active:
+
Advanced: Build Image:
Note: Depending on your internal network these may work out the box
 
Apache, Port 80: http://arm/
 
SSH, Port 22: ssh ubuntu@arm
 
Getty, Serial Port
 
  
Get prebuilt image:
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2015.07 -b tmp
  
wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-console-armhf-2013-04-26.tar.xz
+
Stable:
  
Verify Image with:
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
  md5sum debian-wheezy-console-armhf-2013-04-26.tar.xz
 
8a1c4ff53f3b2a42419ee1c7c1f47e40  debian-wheezy-console-armhf-2013-04-26.tar.xz
 
  
Unpack Image:
+
Testing:
tar xJf debian-wheezy-console-armhf-2013-04-26.tar.xz
 
cd debian-wheezy-console-armhf-2013-04-26
 
  
Install Image:
+
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
  
Quick Install script for "board"
+
== Debian Testing (stretch) ==
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
 
  
"board" options:  
+
Image Updated:
*BeagleBoard Ax/Bx    - beagle_bx
+
*2015-07-08
*BeagleBoard Cx/Dx    - beagle_cx
+
** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
*BeagleBoard xM       - beagle_xm
+
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
*BeagleBone Ax        - bone
+
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
*BeagleBone/Black     - bone_dtb
+
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
*PandaBoard Ax        - panda
+
*2015-06-11
*PandaBoard ES        - panda_es
+
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
 +
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
 +
*2015-05-08
 +
** Beagle/Beagle xM: v4.0.2-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.41-ti-r63 kernel
 +
** OMAP5432 uEVM: v3.14.41-ti-r63 kernel
 +
** BeagleBoard-X15: v3.14.41-ti-r63 kernel
  
So For the BeagleBoard xM:
+
Get prebuilt image:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
  wget https://rcn-ee.com/rootfs/2015-07-08/debian-stretch-console-armhf-2015-07-08.tar.xz
  
*Additional Options
+
Verify Image with:
** --rootfs <ext4 default>
+
md5sum debian-stretch-console-armhf-2015-07-08.tar.xz
** --swap_file <swap file size in MB's>
+
2c39b9cd5cb788bc795f4dd8f27df87f  debian-stretch-console-armhf-2015-07-08.tar.xz
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
= Debian Configuration =
+
Unpack image:
 +
tar xf debian-stretch-console-armhf-2015-07-08.tar.xz
 +
cd debian-stretch-console-armhf-2015-07-08
  
== Serial Ports ==
+
Then follow the directions shown above with the other images...
  
Lenny
+
= Flasher =
  
edit /etc/inittab and add:
+
== eMMC: BeagleBone Black ==
S:2345:respawn:/sbin/getty 115200 ttyS2
 
  
For root access over the serial port add ttyS2 to /etc/securetty
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
 +
This script will only take about 5-6 Minutes after power on.
  
Squeeze
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
edit /etc/inittab and add:
+
User: debian
S:2345:respawn:/sbin/getty 115200 ttyO2
+
pass: temppwd
  
== WiFi ==
+
Image Updated:
 +
*2015-07-08
 +
** BeagleBone Black: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBone Black: v3.14.43-ti-r67 kernel
 +
*2015-05-08
 +
** BeagleBone Black: v3.14.41-ti-r63 kernel
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-07-08/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-07-08/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.bmap
  
== SGX Video Acceleration ==
+
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb*
 +
286cf798eac3ec35809f1c0697e66e70  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.bmap
 +
42e6c6bf5bd00183e107c4cceb92b36c  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  
=== SGX armel/armhf v3.4.x+ ===
+
Linux: (bmaptool)
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
+
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
 +
BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
Linux: (dd)
 +
unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
= raw microSD img =
git clone git://github.com/RobertCNelson/stable-kernel.git
 
cd stable-kernel
 
git checkout origin/v3.6.x -b v3.6.x
 
./build_kernel.sh (and then follow the directions as the script runs...)
 
  
Build kernel
+
== BeagleBoard (classic) ==
./build_kernel.sh
 
  
Build SGX modules
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
./sgx_build_modules.sh
 
  
Insert SD card, make sure to modify MMC in system.sh
+
User: debian
./tools/install_image.sh
+
pass: temppwd
  
Place SD card into the device and boot...
+
Auto partition resize:
  cd /opt/sgx
+
  cd /opt/scripts/tools
  sudo tar xf GFX_4.0*_libs.tar.gz
+
  git pull
  sudo ./install-sgx.sh  
+
  ./grow_partition.sh
 +
sudo reboot
  
Reboot, check modules (lsmod):
+
Image Updated:
Module                  Size  Used by
+
*2015-07-08
bufferclass_ti          5727  0  
+
** Beagle: v4.1.1-armv7-x1 kernel
omaplfb                11512  0  
+
*2015-06-11
pvrsrvkm              165208  2 bufferclass_ti,omaplfb
+
** Beagle: v4.1.0-rc7-armv7-x0
 +
*2015-05-08
 +
** Beagle: v4.0.2-armv7-x2 kernel
  
Blit Test:
+
Get prebuilt image:
  ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
+
  wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
------------------ SGX 3D Blit test -----------------
+
  wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bb-debian-8.1-console-armhf-2015-07-08-2gb.bmap
----------------------- Start -----------------------
 
Call PVRSRVConnect with a valid argument:
 
  OK
 
Get number of devices from PVRSRVEnumerateDevices:
 
  OK
 
.... Reported 1 devices
 
.... Device Number  | Device Type
 
            0000    | PVRSRV_DEVICE_ID_SGX
 
Attempt to acquire device 0:
 
  OK
 
Getting SGX Client info
 
  OK
 
.... ui32ProcessID:1133
 
Display Class API: enumerate devices
 
  OK
 
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
  OK
 
Display Class API: open device
 
  OK
 
Display Class API: Get display info
 
  OK
 
.... Name:PowerVR OMAP Linux Display Driver
 
.... MaxSwapChains:1
 
.... MaxSwapChainBuffers:1
 
.... MinSwapInterval:0
 
.... MaxSwapInterval:1
 
Display Class API: enumerate display formats
 
  OK
 
  OK
 
.... Display format 0 - Pixelformat:1
 
Display Class API: enumerate display dimensions
 
  OK
 
  OK
 
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
Attempt to create memory context for SGX:
 
  OK
 
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
  .... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
Display Class API: get the system (primary) buffer
 
  OK
 
Display Class API: map display surface to SGX
 
  OK
 
Attempt to create transfer context for SGX:
 
  OK
 
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
(bottom right quadrant should be red on blue background):
 
  OK
 
  OK
 
Do a SRCCOPY blit to the top left quadrant of the display:
 
(top left quadrant should be striped (r/g/b/w) on blue background):
 
  OK
 
  OK
 
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
(top right quadrant should be yellow):
 
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
  OK
 
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
and then present the RGB565 to the bottom right quadrant of the screen
 
(bottom right quadrant should be a red gradient):
 
  OK
 
  OK
 
  OK
 
  OK
 
Free the off screen surfaces:
 
  OK
 
  OK
 
  OK
 
  OK
 
Destroy the transfer context:
 
  OK
 
Display Class API: unmap display surface from SGX
 
  OK
 
Destroy Device Memory Context
 
Display Class API: close the device
 
  OK
 
Release SGX Client Info:
 
  OK
 
Disconnect from services:
 
  OK
 
------------------ SGX 3D Blit test -----------------
 
------------------------ End ------------------------
 
  
=== SGX Legacy armel only upto v3.2.x ===
+
Verify Image with:
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+
md5sum bb-debian-8.1-console-armhf-2015-07-08-2gb*
 +
aa2ac2b9ae93433ed1eba4d6002857a5  bb-debian-8.1-console-armhf-2015-07-08-2gb.bmap
 +
aa2ac2b9ae93433ed1eba4d6002857a5  bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Linux: (bmaptool)
  https://github.com/RobertCNelson/stable-kernel
+
sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
 +
bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX
  
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
Linux: (dd)
  https://github.com/RobertCNelson/stable-kernel/issues/8
+
  unxz bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  oneiric:
+
  sudo dd if=./bb-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
 
/bin/bash install-me.sh
 
  
==== SDK unPackage Script ====
+
== BeagleBoard xM ==
  
Download the latest version of the "create_sgx_package.sh" script
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
2.6.37
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
 
2.6.38->3.2.x
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
 
  
Make script executable
+
User: debian
chmod a+x ./create_sgx_package_*.sh
+
pass: temppwd
  
Run script
+
Auto partition resize:
  ./create_sgx_package_*.sh
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
After Successfully running:
+
Image Updated:
 +
*2015-07-08
 +
** Beagle xM: v4.1.1-armv7-x1 kernel
 +
*2015-06-11
 +
** Beagle xM: v4.1.0-rc7-armv7-x0
 +
*2015-05-08
 +
** Beagle xM: v4.0.2-armv7-x2 kernel
  
  :~/temp$ ls
+
Get prebuilt image:
create_sgx_package.sh
+
  wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbxm-debian-8.1-console-armhf-2015-07-08-2gb.bmap
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
==== Beagle: GFX_*_libs.tar.gz ====
+
Verify Image with:
 +
md5sum bbxm-debian-8.1-console-armhf-2015-07-08-2gb*
 +
a2803bc4dfba81ad8c6cd0d3181373f1  bbxm-debian-8.1-console-armhf-2015-07-08-2gb.bmap
 +
b8957064f685ec170a502d15469db1f9  bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
Linux: (bmaptool)
  ./install-SGX.sh (copies necessary SGX libs and startup script)
+
  sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
  ./run-SGX.sh (force run the new init script, or you can just reboot...)
+
  bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX
  
On successful install:
+
Linux: (dd)
  Stopping PVR
+
  unxz bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  Starting PVR
+
  sudo dd if=./bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
== BeagleBone/BeagleBone Black ==
sudo reboot
 
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
tar xf GFX_Linux_SDK.tar.gz
+
User: debian
cd GFX_Linux_SDK
+
pass: temppwd
tar xf OGLES.tar.gz
 
  
==== Test SGX with a DEMO ====
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Image Updated:
./OGLESEvilSkull
+
*2015-07-08
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
 +
*2015-05-08
 +
** BeagleBone/BeagleBone Black: v3.14.41-ti-r63 kernel
  
==== Trouble Shooting ====
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bone-debian-8.1-console-armhf-2015-07-08-2gb.bmap
  
  sudo rm /etc/powervr-esrev
+
Verify Image with:
  sudo depmod -a omaplfb
+
  md5sum bone-debian-8.1-console-armhf-2015-07-08-2gb*
  sudo /etc/init.d/pvr restart
+
  c012289ceee7afe204758f1e348559f1  bone-debian-8.1-console-armhf-2015-07-08-2gb.bmap
 +
  24c9cba824396b44f2f8edcd3e7b94bb  bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  
== DSP ==
+
Linux: (bmaptool)
 +
sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
 +
bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX
  
=== gst-dsp ===
+
Linux: (dd)
 +
unxz bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
 +
sudo dd if=./bone-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX
  
The following Gstreamer elements will be installed:
+
== OMAP5432 uEVM ==
  
  $ gst-inspect | grep dsp
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  dvdspu: dvdspu: Sub-picture Overlay
 
  dsp:  dspdummy: DSP dummy element
 
  dsp:  dspvdec: DSP video decoder
 
  dsp:  dspadec: DSP audio decoder
 
  dsp:  dsph263enc: DSP video encoder
 
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
 
  dsp:  dspjpegenc: DSP video encoder
 
  dsp:  dsph264enc: DSP video encoder
 
  dsp:  dspvpp: DSP VPP filter
 
  dsp:  dspipp: DSP IPP
 
  
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
User: debian
 +
pass: temppwd
  
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
Auto partition resize:
  ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+
  cd /opt/scripts/tools
  CONFIG_TIDSPBRIDGE=m
+
  git pull
  CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
+
  ./grow_partition.sh
CONFIG_TIDSPBRIDGE_RECOVERY=y
+
  sudo reboot
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
  # CONFIG_TIDSPBRIDGE_BACKTRACE is not set
 
  
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
Image Updated:
 +
*2015-07-08
 +
** BeagleBone Black: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBone Black: v3.14.43-ti-r67 kernel
 +
*2015-05-08
 +
** BeagleBone Black: v3.14.41-ti-r63 kernel
  
Download the latest version of the "create_dsp_package.sh" script
+
Get prebuilt image:
  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
+
  wget https://rcn-ee.com/rootfs/2015-07-08/microsd/omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.bmap
  
Make script executable
+
Verify Image with:
  chmod a+x ./create_dsp_package.sh
+
  md5sum omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb*
 +
40695db74493b2273757812669479994  omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.bmap
 +
eb8426b962b8bfb5a9ff252cb53dc404  omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  
Package script:
+
Linux: (bmaptool)
  ./create_dsp_package.sh
+
  sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
 +
omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX
  
Copy DSP_Install_libs.tar.gz to Beagle
+
Linux: (dd)
 +
unxz omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX
  
Setup network...
+
== BeagleBoard-X15 ==
  
Extract:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
 
  
Install:
+
User: debian
ubuntu@arm:~$ ./install-DSP.sh
+
pass: temppwd
  
What got installed:
+
Auto partition resize:
  ubuntu@arm:~$ ls -lh /lib/dsp/
+
  cd /opt/scripts/tools
  total 7.1M
+
  git pull
  -rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
+
  ./grow_partition.sh
-rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
+
  sudo reboot
-rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
 
-rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
 
  -rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
 
-rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
 
-rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
 
-rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
 
-rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
 
-rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
 
-rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
 
-rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
 
  
Building gst-dsp stuff:
+
Image Updated:
 +
*2015-07-08
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
 +
*2015-05-08
 +
** BeagleBoard-X15: v3.14.41-ti-r63 kernel
  
If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbx15-debian-8.1-console-armhf-2015-07-08-2gb.bmap
  
Update arm tools directory to the latest:
+
Verify Image with:
  ubuntu@arm:~$ cd /boot/uboot/tools/
+
  md5sum bbx15-debian-8.1-console-armhf-2015-07-08-2gb*
  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+
723b966a25169c553caf0593b7cbdcbe  bbx15-debian-8.1-console-armhf-2015-07-08-2gb.bmap
 +
  5e2aeb239a37cbb27309eebd750d3767  bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  
Otherwise, install via git:
+
Linux: (bmaptool)
  git clone git://github.com/RobertCNelson/tools.git
+
  sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
 +
bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX
  
Change to the pkgs directory
+
Linux: (dd)
  ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
+
  unxz bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
  (or if just cloned)
+
  sudo dd if=./bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX
ubuntu@arm:~$ cd ~/tools/pkgs
 
  
Build gst-dsp stuff..
+
= Debian Configuration =
./ti-tidspbridge.sh
 
  
Start dspbridge (or just reboot)
+
==Install Latest Kernel Image==
sudo /etc/init.d/dsp_init start
 
  
Test dspbridge
+
Script:
  sudo dsp-test
+
  cd /opt/scripts/tools
 +
git pull
  
Playbin:
+
Stable:
  sudo gst-launch playbin2 uri=file://(file)
+
  ./update_kernel.sh
  
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
Testing:
  Note: it seems broken in Ubuntu precise armhf...
+
  ./update_kernel.sh --beta-kernel
  
  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
Custom: (has to be on rcn-ee.net)
 +
  ./update_kernel.sh --kernel v3.8.13-bone69
  
== Xorg omapfb Drivers ==
+
Reboot with your new Kernel Image.
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Xorg Drivers ==
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
/etc/X11/xorg.conf:
+
BeagleBoard/PandaBoard:
  Section "Device"
+
  cd /opt/scripts/tools/graphics/
Identifier "Configured Video Device"
+
  ./ti-omapdrm.sh
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
BeagleBone/BeagleBone Black:
(II) FBDEV: driver for framebuffer: fbdev
+
  cd /opt/scripts/tools/graphics/
  (II) FBDEV(0): using default device
+
  ./ti-tilcdc.sh
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== SGX Drivers ==
  
xvinfo -display :0.0
+
=== SGX BeagleBone/BeagleBone Black ===
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
Install sgx modules (3.14.x-ti or 4.1.x kernel):
 +
sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
  sudo update-initramfs -uk `uname -r`
  
Lenny:
+
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Squeeze/Sid:
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo apt-get install xserver-xorg-video-omap3
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
  cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
=== xorg.conf ===
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
/etc/X11/xorg.conf
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 
+
  cd /opt/gfxinstall/
Section "Monitor"
+
  sudo ./sgx-install.sh
    Identifier "Configured Monitor"
+
  sudo reboot
EndSection
 
 
Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
 
 
To verify it was correctly installed, reboot and:
 
 
 
cat /var/log/Xorg.0.log | grep omapfb
 
(II) LoadModule: "omapfb"
 
  (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
  (II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
  (==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
 
 
Login into Debian and open a new terminal, xorg has to be running..
 
  
xvinfo -display :0.0
+
Verify omaplfb & pvrsrvkm loaded
  X-Video Extension version 2.2
+
debian@arm:~$ lsmod | grep omaplfb
  screen #0
+
  omaplfb                12065 0  
  Adaptor #0: "OMAP XV adaptor"
+
pvrsrvkm              178782  1 omaplfb
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
= Building Kernel =
  
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
=== Beagle/Beagle xM ===
+
== Beagle/Beagle xM ==
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
=== BeagleBone ===
+
== BeagleBone ==
 
  http://eewiki.net/display/linuxonarm/BeagleBone
 
  http://eewiki.net/display/linuxonarm/BeagleBone
  
=== Panda/Panda ES ===
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
 +
 
 +
== Panda/Panda ES ==
 
  http://eewiki.net/display/linuxonarm/PandaBoard
 
  http://eewiki.net/display/linuxonarm/PandaBoard
  
Line 612: Line 524:
  
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 +
 +
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
 +
 +
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
 +
 +
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 08:12, 9 July 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.1.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.1.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-07-08
    • Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel
  • 2015-05-08
    • Beagle/Beagle xM: v4.0.2-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.41-ti-r63 kernel
    • OMAP5432 uEVM: v3.14.41-ti-r63 kernel
    • BeagleBoard-X15: v3.14.41-ti-r63 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/debian-8.1-console-armhf-2015-07-08.tar.xz

Verify Image with:

md5sum debian-8.1-console-armhf-2015-07-08.tar.xz
7cdb18fc781a89e0b6355e515efb8af8  debian-8.1-console-armhf-2015-07-08.tar.xz

Unpack Image:

tar xf debian-8.1-console-armhf-2015-07-08.tar.xz
cd debian-8.1-console-armhf-2015-07-08

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone/Black - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.07 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2015-07-08
    • Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel
  • 2015-05-08
    • Beagle/Beagle xM: v4.0.2-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v3.14.41-ti-r63 kernel
    • OMAP5432 uEVM: v3.14.41-ti-r63 kernel
    • BeagleBoard-X15: v3.14.41-ti-r63 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/debian-stretch-console-armhf-2015-07-08.tar.xz

Verify Image with:

md5sum debian-stretch-console-armhf-2015-07-08.tar.xz
2c39b9cd5cb788bc795f4dd8f27df87f  debian-stretch-console-armhf-2015-07-08.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2015-07-08.tar.xz
cd debian-stretch-console-armhf-2015-07-08

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-07-08
    • BeagleBone Black: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone Black: v3.14.43-ti-r67 kernel
  • 2015-05-08
    • BeagleBone Black: v3.14.41-ti-r63 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-07-08/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.bmap

Verify Image with:

md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb*
286cf798eac3ec35809f1c0697e66e70  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.bmap
42e6c6bf5bd00183e107c4cceb92b36c  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz

Linux: (bmaptool)

sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-07-08
    • Beagle: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle: v4.1.0-rc7-armv7-x0
  • 2015-05-08
    • Beagle: v4.0.2-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bb-debian-8.1-console-armhf-2015-07-08-2gb.bmap

Verify Image with:

md5sum bb-debian-8.1-console-armhf-2015-07-08-2gb*
aa2ac2b9ae93433ed1eba4d6002857a5  bb-debian-8.1-console-armhf-2015-07-08-2gb.bmap
aa2ac2b9ae93433ed1eba4d6002857a5  bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz

Linux: (bmaptool)

sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bb-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
sudo dd if=./bb-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-07-08
    • Beagle xM: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle xM: v4.1.0-rc7-armv7-x0
  • 2015-05-08
    • Beagle xM: v4.0.2-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbxm-debian-8.1-console-armhf-2015-07-08-2gb.bmap

Verify Image with:

md5sum bbxm-debian-8.1-console-armhf-2015-07-08-2gb*
a2803bc4dfba81ad8c6cd0d3181373f1  bbxm-debian-8.1-console-armhf-2015-07-08-2gb.bmap
b8957064f685ec170a502d15469db1f9  bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz

Linux: (bmaptool)

sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
sudo dd if=./bbxm-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX

BeagleBone/BeagleBone Black

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-07-08
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
  • 2015-05-08
    • BeagleBone/BeagleBone Black: v3.14.41-ti-r63 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bone-debian-8.1-console-armhf-2015-07-08-2gb.bmap

Verify Image with:

md5sum bone-debian-8.1-console-armhf-2015-07-08-2gb*
c012289ceee7afe204758f1e348559f1  bone-debian-8.1-console-armhf-2015-07-08-2gb.bmap
24c9cba824396b44f2f8edcd3e7b94bb  bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz

Linux: (bmaptool)

sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
sudo dd if=./bone-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-07-08
    • BeagleBone Black: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone Black: v3.14.43-ti-r67 kernel
  • 2015-05-08
    • BeagleBone Black: v3.14.41-ti-r63 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/microsd/omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.bmap

Verify Image with:

md5sum omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb*
40695db74493b2273757812669479994  omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.bmap
eb8426b962b8bfb5a9ff252cb53dc404  omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz

Linux: (bmaptool)

sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-07-08
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel
  • 2015-05-08
    • BeagleBoard-X15: v3.14.41-ti-r63 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-07-08/microsd/bbx15-debian-8.1-console-armhf-2015-07-08-2gb.bmap

Verify Image with:

md5sum bbx15-debian-8.1-console-armhf-2015-07-08-2gb*
723b966a25169c553caf0593b7cbdcbe  bbx15-debian-8.1-console-armhf-2015-07-08-2gb.bmap
5e2aeb239a37cbb27309eebd750d3767  bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz

Linux: (bmaptool)

sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-07-08-2gb.bmap \
bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img.xz
sudo dd if=./bbx15-debian-8.1-console-armhf-2015-07-08-2gb.img of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x-ti or 4.1.x kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade