Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Debian Jessie (development snapshot))
m (2015-08-17)
(79 intermediate revisions by 9 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
 
= Help =
 
= Help =
Line 10: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.7.x Stable (3.7.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 21: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
Line 32: Line 36:
  
 
Scripts:
 
Scripts:
  git clone git://github.com/RobertCNelson/netinstall.git
+
  git clone https://github.com/RobertCNelson/netinstall.git
 
  cd netinstall
 
  cd netinstall
  
 
Device Options:
 
Device Options:
  BeagleBoard --uboot beagle_cx
+
  BeagleBoard --dtb omap3-beagle
  BeagleBoard xM --uboot beagle_xm
+
  BeagleBoard xM --dtb omap3-beagle-xm
  BeagleBone (serial) --uboot bone-serial
+
  BeagleBone (serial) --dtb am335x-bone-serial
  BeagleBone (video via cape) --uboot bone-video
+
  BeagleBone (video via cape) --dtb am335x-bone-video
 
  BeagleBone Black --dtb am335x-boneblack
 
  BeagleBone Black --dtb am335x-boneblack
  PandaBoard --uboot panda
+
  PandaBoard (A1->A3) --dtb omap4-panda
  PandaBoard ES  --uboot panda_es
+
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
  PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Wheezy ==
+
== Debian 8 (jessie) ==
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
 
*Options:
 
*Options:
Line 62: Line 66:
 
= Demo Image =
 
= Demo Image =
  
== Debian 7.1 (wheezy) ==
+
* '''Advanced Users only''': Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.1.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.1.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
  
Default username/password:  
+
Default username/password:
 
*username: debian
 
*username: debian
 
*password: temppwd
 
*password: temppwd
 
Default root user/password
 
*user: root
 
*password: root
 
  
 
Image Updated:
 
Image Updated:
*2013-07-22
+
*2015-08-17
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+
** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone24 kernel
+
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
*2013-06-14
+
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
** shellinabox disabled...
+
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
** Beagle/Panda/Panda ES: v3.7.10-x12 kernel
+
*2015-07-08
*** Panda: WiFi works again...
+
** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
** BeagleBone: v3.2.42-psp27 kernel
+
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone21 kernel (--uboot bone_dtb)
+
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
*** BBB: Now built with the patched 'dtc'...
+
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
*2013-05-29
+
*2015-06-11
** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
+
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
** BeagleBone: v3.2.42-psp27 kernel
+
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone20 kernel (--uboot bone_dtb)
+
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
*** BBB: USB hotplug now works...
+
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
  
 
Services Active:
 
Services Active:
  Note: Depending on your internal network these may work out the box
+
  Note: Depending on your internal network these may work out of the box
  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
+
  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  SSH, Port 22: ssh ubuntu@arm (Bone: via usb) ubuntu@192.168.7.2
+
  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 
  Getty, Serial Port
 
  Getty, Serial Port
  
Active on Boot Script:
+
Default user: debian pass: temppwd
*Disable by removing "run_boot-scripts" from small boot partition...*
 
/opt/boot-scripts/<board>.sh
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-7.1-console-armhf-2013-07-22.tar.xz
+
  wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-8.1-console-armhf-2015-08-17.tar.xz
 +
 
 +
Verify Image with:
 +
md5sum debian-8.1-console-armhf-2015-08-17.tar.xz
 +
4633c5498760ae704885281a9026e4a4  debian-8.1-console-armhf-2015-08-17.tar.xz
  
Verify Image with:
 
md5sum debian-7.1-console-armhf-2013-07-22.tar.xz
 
52d53e4cbfd7c227e8f1d952409d8ae3  debian-7.1-console-armhf-2013-07-22.tar.xz
 
 
Unpack Image:
 
Unpack Image:
  tar xJf debian-7.1-console-armhf-2013-07-22.tar.xz
+
  tar xf debian-8.1-console-armhf-2015-08-17.tar.xz
  cd debian-7.1-console-armhf-2013-07-22
+
  cd debian-8.1-console-armhf-2015-08-17
 +
 
 +
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
 +
 
 +
You should see something like:
 +
 
 +
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
 
Install Image:
 
Install Image:
  
Quick Install script for "board"
+
Quick install script for [board]
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2015.08 -b tmp
 +
 
 +
Stable:
  
"board" options:
+
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
*BeagleBoard Ax/Bx    - beagle_bx
 
*BeagleBoard Cx/Dx    - beagle_cx
 
*BeagleBoard xM      - beagle_xm
 
*BeagleBone/Black    - bone_dtb
 
*PandaBoard Ax        - panda
 
*PandaBoard ES        - panda_es
 
  
So For the BeagleBoard xM:
+
Testing:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
 
  
*Additional Options
+
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
== Debian Jessie (development snapshot) ==
+
== Debian Testing (stretch) ==
  
 
Image Updated:
 
Image Updated:
*2013-07-22
+
*2015-08-17
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+
** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone24 kernel
+
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
*2013-06-14
+
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
** shellinabox disabled...
+
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
** Beagle/Panda/Panda ES: v3.7.10-x12 kernel
+
*2015-07-08
*** Panda: WiFi works again...
+
** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
** BeagleBone: v3.2.42-psp27 kernel
+
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone21 kernel (--uboot bone_dtb)
+
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
*** BBB: Now built with the patched 'dtc'...
+
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
*2013-05-29
+
*2015-06-11
** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
+
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
** BeagleBone: v3.2.42-psp27 kernel
+
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone20 kernel (--uboot bone_dtb)
+
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
*** BBB: USB hotplug now works...
+
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget http://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2013-07-22.tar.xz
+
  wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-stretch-console-armhf-2015-08-17.tar.xz
  
Verify image with:  
+
Verify Image with:
  md5sum debian-jessie-console-armhf-2013-07-22.tar.xz
+
  md5sum debian-stretch-console-armhf-2015-08-17.tar.xz
  28bf234d63eba8fa94e2c6a1fd28128a debian-jessie-console-armhf-2013-07-22.tar.xz
+
  b10a5e002914fed3914e395591bf23c2 debian-stretch-console-armhf-2015-08-17.tar.xz
  
 
Unpack image:
 
Unpack image:
  tar xJf debian-jessie-console-armhf-2013-07-22.tar.xz
+
  tar xf debian-stretch-console-armhf-2015-08-17.tar.xz
  cd debian-jessie-console-armhf-2013-07-22
+
  cd debian-stretch-console-armhf-2015-08-17
  
Then follow directions show above with the other images...
+
Then follow the directions shown above with the other images...
  
 
= Flasher =
 
= Flasher =
  
== eMMC: BeagleBone Black ==
+
== eMMC: BeagleBone Black/Green ==
  
This image can be written to a 1Gb (or greater) microSD card, via 'dd' in linux or the win32 image program linked to on CircuitCo's wiki page.  First hold down on the boot select button (next to microSD card) and apply  
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
power (same procedure as the official CircuitCo images), it should boot into debian and begin flashing the eMMC, once completed all 4 LED's should be full ON...  Simply remove power, remove microSDcard and Debian will now boot from eMMC.
 
  
Reference: (this is the script that writes to the eMMC)
+
Script for reference: (this is the script that writes to the eMMC)
  https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-copy-microSD-to-eMMC.sh
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
BTW: we are only writing about 500Mb's to the eMMC so the script will only take about 5-6 Minutes after power on.
+
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: debian
 +
pass: temppwd
  
 
Image Updated:
 
Image Updated:
*2013-07-22
+
*2015-08-17
** BeagleBone Black: v3.8.13-bone24 kernel
+
** BeagleBone Black/Green: v4.1.5-ti-r10 kernel
*2013-06-14
+
*2015-07-08
** shellinabox disabled...
+
** BeagleBone Black/Green: v4.1.1-ti-r2 kernel
** BeagleBone Black: v3.8.13-bone21 kernel (--uboot bone_dtb)
+
*2015-06-11
*** BBB: Now built with the patched 'dtc'...
+
** BeagleBone Black/Green: v3.14.43-ti-r67 kernel
*2013-05-29
 
** BeagleBone Black: v3.8.13-bone20 kernel
 
*** BBB: USB hotplug now works...
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget http://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.1-2013-07-22.img.xz
+
  wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
 
Verify Image with:
 
Verify Image with:
  md5sum BBB-eMMC-flasher-debian-7.1-2013-07-22.img.xz
+
  md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb*
  86d771af79131526913e3b98089d96c7 BBB-eMMC-flasher-debian-7.1-2013-07-22.img.xz
+
c4bb38cb3aa760ad75e8ef5272b33b0c  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
3ca10baec660c293429f25cfc6990617  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
 
 +
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
 +
  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
 +
 
 +
Linux: (dd)
 +
  unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
 +
 
 +
= raw microSD img =
  
Follow the "standard" update procedure.
+
== BeagleBoard (classic) ==
http://circuitco.com/support/index.php?title=Updating_The_Software
 
  
= Debian Configuration =
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
== Serial Ports ==
+
Image Updated:
 +
*2015-08-17
 +
** Beagle: v4.1.5-armv7-x2 kernel
 +
*2015-07-08
 +
** Beagle: v4.1.1-armv7-x1 kernel
 +
*2015-06-11
 +
** Beagle: v4.1.0-rc7-armv7-x0 kernel
  
Wheezy
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
edit /etc/inittab and add:
+
Verify Image with:
  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
+
  md5sum bb-debian-8.1-console-armhf-2015-08-17-2gb*
 +
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
== SGX Video Acceleration ==
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
 +
bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
=== SGX armel/armhf v3.4.x+ ===
+
Linux: (dd)
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
+
unxz bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bb-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
== BeagleBoard xM ==
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
git clone git://github.com/RobertCNelson/stable-kernel.git
 
cd stable-kernel
 
git checkout origin/v3.7.x -b tmp
 
./build_kernel.sh (and then follow the directions as the script runs...)
 
  
Build kernel
+
User: debian
./build_kernel.sh
+
pass: temppwd
  
Build SGX modules
+
Auto partition resize:
  ./sgx_build_modules.sh
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
Insert SD card, make sure to modify MMC in system.sh
+
Image Updated:
./tools/install_image.sh
+
*2015-08-17
 +
** Beagle xM: v4.1.5-armv7-x2 kernel
 +
*2015-07-08
 +
** Beagle xM: v4.1.1-armv7-x1 kernel
 +
*2015-06-11
 +
** Beagle xM: v4.1.0-rc7-armv7-x0 kernel
  
Place SD card into the device and boot...
+
Get prebuilt image:
  cd /opt/sgx
+
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo tar xf GFX_4.0*_libs.tar.gz
+
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  sudo ./install-sgx.sh
 
  
Reboot, check modules (lsmod):
+
Verify Image with:
  Module                  Size  Used by
+
  md5sum bbxm-debian-8.1-console-armhf-2015-08-17-2gb*
bufferclass_ti          5727  0
+
  b0b8f64aac92f5cc280413a80b959a6d bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  omaplfb                11512 0
+
  b042dec7d980562cfbb4414ad5ce5cde bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  pvrsrvkm              165208 2 bufferclass_ti,omaplfb
 
  
Blit Test:
+
Linux: (bmaptool 3.2)
ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
+
  sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
  ------------------ SGX 3D Blit test -----------------
+
  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
----------------------- Start -----------------------
 
Call PVRSRVConnect with a valid argument:
 
  OK
 
Get number of devices from PVRSRVEnumerateDevices:
 
  OK
 
.... Reported 1 devices
 
.... Device Number  | Device Type
 
            0000    | PVRSRV_DEVICE_ID_SGX
 
Attempt to acquire device 0:
 
  OK
 
Getting SGX Client info
 
  OK
 
.... ui32ProcessID:1133
 
Display Class API: enumerate devices
 
  OK
 
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
  OK
 
Display Class API: open device
 
  OK
 
Display Class API: Get display info
 
  OK
 
.... Name:PowerVR OMAP Linux Display Driver
 
.... MaxSwapChains:1
 
.... MaxSwapChainBuffers:1
 
.... MinSwapInterval:0
 
.... MaxSwapInterval:1
 
Display Class API: enumerate display formats
 
  OK
 
  OK
 
.... Display format 0 - Pixelformat:1
 
  Display Class API: enumerate display dimensions
 
  OK
 
  OK
 
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
Attempt to create memory context for SGX:
 
  OK
 
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
.... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
Display Class API: get the system (primary) buffer
 
  OK
 
Display Class API: map display surface to SGX
 
  OK
 
Attempt to create transfer context for SGX:
 
  OK
 
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
(bottom right quadrant should be red on blue background):
 
  OK
 
  OK
 
Do a SRCCOPY blit to the top left quadrant of the display:
 
(top left quadrant should be striped (r/g/b/w) on blue background):
 
  OK
 
  OK
 
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
(top right quadrant should be yellow):
 
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
  OK
 
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
and then present the RGB565 to the bottom right quadrant of the screen
 
(bottom right quadrant should be a red gradient):
 
  OK
 
  OK
 
  OK
 
  OK
 
Free the off screen surfaces:
 
  OK
 
  OK
 
  OK
 
  OK
 
Destroy the transfer context:
 
  OK
 
Display Class API: unmap display surface from SGX
 
  OK
 
Destroy Device Memory Context
 
Display Class API: close the device
 
  OK
 
Release SGX Client Info:
 
  OK
 
Disconnect from services:
 
  OK
 
------------------ SGX 3D Blit test -----------------
 
------------------------ End ------------------------
 
  
=== SGX Legacy armel only upto v3.2.x ===
+
Linux: (dd)
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+
unxz bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
== BeagleBone White/Black/Green ==
  https://github.com/RobertCNelson/stable-kernel
 
  
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
https://github.com/RobertCNelson/stable-kernel/issues/8
 
oneiric:
 
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
 
/bin/bash install-me.sh
 
  
==== SDK unPackage Script ====
+
User: debian
 +
pass: temppwd
  
Download the latest version of the "create_sgx_package.sh" script
+
Auto partition resize:
2.6.37
+
  cd /opt/scripts/tools
  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
+
  git pull
  2.6.38->3.2.x
+
  ./grow_partition.sh
  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
+
sudo reboot
  
Make script executable
+
Image Updated:
chmod a+x ./create_sgx_package_*.sh
+
*2015-08-17
 +
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel
  
Run script
+
Get prebuilt image:
  ./create_sgx_package_*.sh
+
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
After Successfully running:
+
Verify Image with:
 +
md5sum bone-debian-8.1-console-armhf-2015-08-17-2gb*
 +
0561042d4f3cf806fbbd88d84777bbc4  bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
61cda9556caf4e6ba81421d6d5ba8f3d  bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
:~/temp$ ls
+
Linux: (bmaptool 3.2)
create_sgx_package.sh
+
  sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
  GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
==== Beagle: GFX_*_libs.tar.gz ====
+
Linux: (dd)
 +
unxz bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bone-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
== OMAP5432 uEVM ==
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On successful install:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
Stopping PVR
 
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
Image Updated:
 +
*2015-08-17
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
  tar xf GFX_Linux_SDK.tar.gz
+
Verify Image with:
  cd GFX_Linux_SDK
+
  md5sum omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb*
  tar xf OGLES.tar.gz
+
d03f202299266eec0ef9d730aec6c77a  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
  8a0dd02bc637345a8891b75d5c5899bb omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
==== Test SGX with a DEMO ====
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
 +
omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux: (dd)
  ./OGLESEvilSkull
+
  unxz omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
  sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
==== Trouble Shooting ====
+
== BeagleBoard-X15 ==
  
sudo rm /etc/powervr-esrev
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
User: debian
 +
pass: temppwd
  
=== gst-dsp ===
+
Auto partition resize:
*Note: This section is BeagleBoard(-xM) only since the BeagleBone (Black) doesn't have a DSP.
+
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
The following Gstreamer elements will be installed:
+
Image Updated:
 +
*2015-08-17
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
  
  $ gst-inspect | grep dsp
+
Get prebuilt image:
  dvdspu: dvdspu: Sub-picture Overlay
+
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  dsp:  dspdummy: DSP dummy element
+
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  dsp: dspvdec: DSP video decoder
 
  dsp:  dspadec: DSP audio decoder
 
  dsp:  dsph263enc: DSP video encoder
 
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
 
  dsp:  dspjpegenc: DSP video encoder
 
  dsp:  dsph264enc: DSP video encoder
 
  dsp:  dspvpp: DSP VPP filter
 
  dsp:  dspipp: DSP IPP
 
  
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
Verify Image with:
 +
md5sum bbx15-debian-8.1-console-armhf-2015-08-17-2gb*
 +
6113cf783d5cbd302d0d669cd94ea90c  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
66534f87f3e62d22386714214027a9d4  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
Linux: (bmaptool 3.2)
  ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+
sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
CONFIG_TIDSPBRIDGE=m
+
  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
 
CONFIG_TIDSPBRIDGE_RECOVERY=y
 
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
# CONFIG_TIDSPBRIDGE_BACKTRACE is not set
 
  
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
Linux: (dd)
 +
unxz bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
Download the latest version of the "create_dsp_package.sh" script
+
= Debian Configuration =
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
 
  
Make script executable
+
==Install Latest Kernel Image==
chmod a+x ./create_dsp_package.sh
 
  
Package script:
+
Script:
  ./create_dsp_package.sh
+
  cd /opt/scripts/tools
 +
git pull
  
Copy DSP_Install_libs.tar.gz to Beagle
+
Stable:
 +
./update_kernel.sh
  
Setup network...
+
Testing:
 +
./update_kernel.sh --beta-kernel
  
Extract:
+
Custom: (has to be on rcn-ee.net)
  ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
+
  ./update_kernel.sh --kernel v3.8.13-bone69
  
Install:
+
Reboot with your new Kernel Image.
ubuntu@arm:~$ ./install-DSP.sh
 
  
What got installed:
+
== Xorg Drivers ==
ubuntu@arm:~$ ls -lh /lib/dsp/
 
total 7.1M
 
-rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
 
-rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
 
-rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
 
-rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
 
-rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
 
-rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
 
-rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
 
-rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
 
-rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
 
-rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
 
-rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
 
-rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
 
  
Building gst-dsp stuff:
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Update arm tools directory to the latest:
+
BeagleBone/BeagleBone Black:
  ubuntu@arm:~$ cd /boot/uboot/tools/
+
  cd /opt/scripts/tools/graphics/
  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+
  ./ti-tilcdc.sh
  
Otherwise, install via git:
+
== SGX Drivers ==
git clone git://github.com/RobertCNelson/tools.git
 
  
Change to the pkgs directory
+
=== SGX BeagleBone/BeagleBone Black ===
ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
 
(or if just cloned)
 
ubuntu@arm:~$ cd ~/tools/pkgs
 
  
Build gst-dsp stuff..
+
Note, these are FBDEV only, no xorg/x11/etc...
./ti-tidspbridge.sh
 
  
Start dspbridge (or just reboot)
+
Install sgx modules (3.14.x-ti or 4.1.x kernel):
  sudo /etc/init.d/dsp_init start
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
sudo update-initramfs -uk `uname -r`
  
Test dspbridge
+
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo dsp-test
+
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Playbin:
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo gst-launch playbin2 uri=file://(file)
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
  cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
  Note: it seems broken in Ubuntu precise armhf...
+
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
  sudo ./sgx-install.sh
 +
sudo reboot
  
  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
Verify omaplfb & pvrsrvkm loaded
 +
  debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
== Building Kernel ==
+
= Building Kernel =
  
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
=== Beagle/Beagle xM ===
+
== Beagle/Beagle xM ==
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
=== BeagleBone ===
+
== BeagleBone ==
 
  http://eewiki.net/display/linuxonarm/BeagleBone
 
  http://eewiki.net/display/linuxonarm/BeagleBone
  
=== BeagleBone Black ===
+
== BeagleBone Black ==
 
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
 
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
=== Panda/Panda ES ===
+
== Panda/Panda ES ==
 
  http://eewiki.net/display/linuxonarm/PandaBoard
 
  http://eewiki.net/display/linuxonarm/PandaBoard
  

Revision as of 07:23, 18 August 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.1.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.1.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-08-17
    • Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-8.1-console-armhf-2015-08-17.tar.xz

Verify Image with:

md5sum debian-8.1-console-armhf-2015-08-17.tar.xz
4633c5498760ae704885281a9026e4a4  debian-8.1-console-armhf-2015-08-17.tar.xz

Unpack Image:

tar xf debian-8.1-console-armhf-2015-08-17.tar.xz
cd debian-8.1-console-armhf-2015-08-17

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.08 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2015-08-17
    • Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-stretch-console-armhf-2015-08-17.tar.xz

Verify Image with:

md5sum debian-stretch-console-armhf-2015-08-17.tar.xz
b10a5e002914fed3914e395591bf23c2  debian-stretch-console-armhf-2015-08-17.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2015-08-17.tar.xz
cd debian-stretch-console-armhf-2015-08-17

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-08-17
    • BeagleBone Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone Black/Green: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone Black/Green: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb*
c4bb38cb3aa760ad75e8ef5272b33b0c  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
3ca10baec660c293429f25cfc6990617  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • Beagle: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • Beagle: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle: v4.1.0-rc7-armv7-x0 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bb-debian-8.1-console-armhf-2015-08-17-2gb*
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bb-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • Beagle xM: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • Beagle xM: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle xM: v4.1.0-rc7-armv7-x0 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bbxm-debian-8.1-console-armhf-2015-08-17-2gb*
b0b8f64aac92f5cc280413a80b959a6d  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
b042dec7d980562cfbb4414ad5ce5cde  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bone-debian-8.1-console-armhf-2015-08-17-2gb*
0561042d4f3cf806fbbd88d84777bbc4  bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
61cda9556caf4e6ba81421d6d5ba8f3d  bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bone-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb*
d03f202299266eec0ef9d730aec6c77a  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
8a0dd02bc637345a8891b75d5c5899bb  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bbx15-debian-8.1-console-armhf-2015-08-17-2gb*
6113cf783d5cbd302d0d669cd94ea90c  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
66534f87f3e62d22386714214027a9d4  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x-ti or 4.1.x kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade