Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Trouble Shooting: add dsp info)
m (2015-08-17)
(176 intermediate revisions by 14 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
** Kernel Trees
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Stable Kernel 2.6.36 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6.38-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
** [http://elinux.org/BeagleBoardUbuntuKernel Kernel Testing Results]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 24: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Squeeze ==
+
== Debian 8 (jessie) ==
  
  git clone git://github.com/RobertCNelson/netinstall-omap.git
+
Quick Install script for "board"
cd netinstall-omap
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
  ./mk_mmc.sh --mmc /dev/sdX --uboot beagle --distro squeeze --firmware
+
 
 +
So For the BeagleBoard xM:
 +
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
 
*Options:
 
*Options:
**--uboot : beagle, (panda only serial, display not working)
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
**--usb-rootfs : (uImage on /dev/mmcblkp0 and rootfs on external usb drive /dev/sda1)
 
  
Note: The default options work for most people, but if you'd like to tweak boot settings, edit these before running the script.  
+
= Demo Image =
 +
 
 +
* '''Advanced Users only''': Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.1.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.1.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2015-08-17
 +
** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
 +
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
 +
 
 +
Default user: debian pass: temppwd
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-8.1-console-armhf-2015-08-17.tar.xz
 +
 
 +
Verify Image with:
 +
md5sum debian-8.1-console-armhf-2015-08-17.tar.xz
 +
4633c5498760ae704885281a9026e4a4  debian-8.1-console-armhf-2015-08-17.tar.xz
 +
 
 +
Unpack Image:
 +
tar xf debian-8.1-console-armhf-2015-08-17.tar.xz
 +
cd debian-8.1-console-armhf-2015-08-17
 +
 
 +
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
 +
 
 +
You should see something like:
 +
 
 +
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
   
 
   
  NetInstall boot Settings:
+
  fdisk -l:
  gedit ./netinstall-omap/scripts/dvi.cmd
+
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
  gedit ./netinstall-omap/scripts/serial.cmd
+
  Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  Normal Boot Settings:
+
  lsblk:
  gedit ./netinstall-omap/scripts/dvi-normal-squeeze.cmd
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  gedit ./netinstall-omap/scripts/serial-normal-squeeze.cmd
+
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part / '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 +
 
 +
Install Image:
 +
 
 +
Quick install script for [board]
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2015.08 -b tmp
 +
 
 +
Stable:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
 +
 
 +
Testing:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 +
 
 +
== Debian Testing (stretch) ==
 +
 
 +
Image Updated:
 +
*2015-08-17
 +
** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
 +
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
 +
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-stretch-console-armhf-2015-08-17.tar.xz
 +
 
 +
Verify Image with:
 +
md5sum debian-stretch-console-armhf-2015-08-17.tar.xz
 +
b10a5e002914fed3914e395591bf23c2  debian-stretch-console-armhf-2015-08-17.tar.xz
 +
 
 +
Unpack image:
 +
tar xf debian-stretch-console-armhf-2015-08-17.tar.xz
 +
cd debian-stretch-console-armhf-2015-08-17
 +
 
 +
Then follow the directions shown above with the other images...
 +
 
 +
= Flasher =
 +
 
 +
== eMMC: BeagleBone Black/Green ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
==Beagleboard: NetInstall==
+
User: debian
 +
pass: temppwd
  
Choose a language
+
Image Updated:
  C - No localization
+
*2015-08-17
  English - English
+
** BeagleBone Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone Black/Green: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBone Black/Green: v3.14.43-ti-r67 kernel
  
Configure the network:
+
Get prebuilt image:
  usb0: USB net <- See below for 2.6.29. Could not find usb0 with B7 installing 2.6.28.
+
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  eth0: Ethernet <- Your usb-ethernet device
+
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Verify Image with:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb*
 +
c4bb38cb3aa760ad75e8ef5272b33b0c  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
3ca10baec660c293429f25cfc6990617  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
Configuring usb0 network bridge for 2.6.29:
+
Linux: (bmaptool 3.2)
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
  # ifconfig ethX 0.0.0.0
+
BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Linux: (dd)
 +
  unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
= raw microSD img =
  Logical Volume Manager not available: <Continue>
 
  
Partition disks:
+
== BeagleBoard (classic) ==
  Guided - Use the largest continuous free space
 
  
Partitioning scheme....
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
Example:
+
User: debian
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
pass: temppwd
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
  No installable kernel was found in the defined APT sources? :
+
Auto partition resize:
  Continue without installing a kernel? : <yes>
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Standard System
+
Image Updated:
 +
*2015-08-17
 +
** Beagle: v4.1.5-armv7-x2 kernel
 +
*2015-07-08
 +
** Beagle: v4.1.1-armv7-x1 kernel
 +
*2015-06-11
 +
** Beagle: v4.1.0-rc7-armv7-x0 kernel
  
  No BootLoader: <ok>
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
==Beagleboard: Install Latest Kernel==
+
Verify Image with:
 +
md5sum bb-debian-8.1-console-armhf-2015-08-17-2gb*
 +
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
Script File:
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
 +
bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
Lenny:
+
Linux: (dd)
  wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.11-x13/install-me.sh
+
  unxz bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  sudo /bin/bash install-me.sh
+
  sudo dd if=./bb-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
 
Squeeze:
 
export DIST=squeeze
 
wget http://rcn-ee.net/deb/${DIST}/LATEST
 
wget $(cat ./LATEST | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new Kernel
+
== BeagleBoard xM ==
  
= Debian Configuration =
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
== Serial Ports ==
+
User: debian
 +
pass: temppwd
  
Lenny
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
edit /etc/inittab and add:
+
Image Updated:
S:2345:respawn:/sbin/getty 115200 ttyS2
+
*2015-08-17
 +
** Beagle xM: v4.1.5-armv7-x2 kernel
 +
*2015-07-08
 +
** Beagle xM: v4.1.1-armv7-x1 kernel
 +
*2015-06-11
 +
** Beagle xM: v4.1.0-rc7-armv7-x0 kernel
  
For root access over the serial port add ttyS2 to /etc/securetty
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
== WiFi ==
+
Verify Image with:
 +
md5sum bbxm-debian-8.1-console-armhf-2015-08-17-2gb*
 +
b0b8f64aac92f5cc280413a80b959a6d  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
b042dec7d980562cfbb4414ad5ce5cde  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
 +
bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
== SGX Video Acceleration ==
+
Linux: (dd)
 +
unxz bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
== BeagleBone White/Black/Green ==
  https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
=== SDK unPackage Script ===
+
User: debian
 +
pass: temppwd
  
Download the latest version of the "create_sgx_package.sh" script
+
Auto partition resize:
  wget http://rcn-ee.homeip.net:81/dl/updates/2.6-stable/create_sgx_package.sh
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Make script executable
+
Image Updated:
chmod a+x ./create_sgx_package.sh
+
*2015-08-17
 +
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel
  
Run script
+
Get prebuilt image:
  ./create_sgx_package.sh
+
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
After Successfully running:
+
Verify Image with:
 +
md5sum bone-debian-8.1-console-armhf-2015-08-17-2gb*
 +
0561042d4f3cf806fbbd88d84777bbc4  bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
61cda9556caf4e6ba81421d6d5ba8f3d  bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
:~/temp$ ls
+
Linux: (bmaptool 3.2)
create_sgx_package.sh
+
  sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
  GFX_4_00_00_01_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_4_00_00_01.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
Linux: (dd)
 +
unxz bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bone-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
== OMAP5432 uEVM ==
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
Stopping PVR
 
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure (Maverick's Alpha-1 needs this....)
+
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Image Updated:
 +
*2015-08-17
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
 
 +
Verify Image with:
 +
md5sum omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb*
 +
d03f202299266eec0ef9d730aec6c77a  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
8a0dd02bc637345a8891b75d5c5899bb  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
  tar xf GFX_Linux_SDK.tar.gz
+
Linux: (bmaptool 3.2)
  cd GFX_Linux_SDK
+
  sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
tar xf OGLES.tar.gz
+
  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
=== Test SGX with a DEMO ===
+
Linux: (dd)
 +
unxz omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
cd OGLES/SDKPackage/Binaries/CommonX11/Demos/ChameleonMan
+
== BeagleBoard-X15 ==
./OGLESChameleonMan
 
  
=== Trouble Shooting ===
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
sudo rm /etc/powervr-esrev
+
User: debian
sudo depmod -a omaplfb
+
pass: temppwd
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
=== gst-dsp ===
+
Image Updated:
 +
*2015-08-17
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
  
Using: https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
  
Use latest kernel build "./build_kernel.sh"
+
Verify Image with:
 +
md5sum bbx15-debian-8.1-console-armhf-2015-08-17-2gb*
 +
6113cf783d5cbd302d0d669cd94ea90c  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
 +
66534f87f3e62d22386714214027a9d4  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
  
Package script:
+
Linux: (bmaptool 3.2)
  ./create_dsp_package.sh
+
  sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
 +
bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
Copy DSP_Install_libs.tar.gz to beagle
+
Linux: (dd)
 +
unxz bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
Setup network...
+
= Debian Configuration =
  
Extract:
+
==Install Latest Kernel Image==
tar xf DSP_Install_libs.tar.gz
 
  
Install
+
Script:
  ./install-DSP.sh
+
  cd /opt/scripts/tools
 +
git pull
  
Build gst-dsp stuff..
+
Stable:
  ./install-gst-dsp.sh
+
  ./update_kernel.sh
  
Test:
+
Testing:
  sudo dsp-test
+
  ./update_kernel.sh --beta-kernel
  
Playbin:
+
Custom: (has to be on rcn-ee.net)
  sudo gst-launch playbin2 uri:file://(file)
+
  ./update_kernel.sh --kernel v3.8.13-bone69
  
== Xorg omapfb Drivers ==
+
Reboot with your new Kernel Image.
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Xorg Drivers ==
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
/etc/X11/xorg.conf:
+
BeagleBoard/PandaBoard:
  Section "Device"
+
  cd /opt/scripts/tools/graphics/
Identifier "Configured Video Device"
+
  ./ti-omapdrm.sh
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
BeagleBone/BeagleBone Black:
(II) FBDEV: driver for framebuffer: fbdev
+
  cd /opt/scripts/tools/graphics/
  (II) FBDEV(0): using default device
+
  ./ti-tilcdc.sh
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== SGX Drivers ==
  
xvinfo -display :0.0
+
=== SGX BeagleBone/BeagleBone Black ===
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
Install sgx modules (3.14.x-ti or 4.1.x kernel):
 +
sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
  sudo update-initramfs -uk `uname -r`
  
Lenny:
+
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Squeeze/Sid:
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo apt-get install xserver-xorg-video-omap3
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
  cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
=== xorg.conf ===
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
/etc/X11/xorg.conf
+
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
Section "Monitor"
+
Verify omaplfb & pvrsrvkm loaded
    Identifier "Configured Monitor"
+
  debian@arm:~$ lsmod | grep omaplfb
  EndSection
+
  omaplfb                12065 0
   
+
  pvrsrvkm              178782 1 omaplfb
  Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
  EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
= Building Kernel =
  
cat /var/log/Xorg.0.log | grep omapfb
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
xvinfo -display :0.0
+
== BeagleBone ==
  X-Video Extension version 2.2
+
  http://eewiki.net/display/linuxonarm/BeagleBone
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== DSP ==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
= Kernel Build =
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
https://launchpad.net/~beagleboard-kernel
+
= Upgrading from Debian 5 to Debian 6 =
  
Register on launchpad.net, install bzr
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
sudo apt-get install bzr
 
  
Download SRC
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
  
Build Kernel
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
./build_kernel.sh
 
  
Build Deb File
+
sudo apt-get update ; sudo apt-get upgrade
  ./build_deb.sh
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 07:23, 18 August 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.1.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.1.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-08-17
    • Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-8.1-console-armhf-2015-08-17.tar.xz

Verify Image with:

md5sum debian-8.1-console-armhf-2015-08-17.tar.xz
4633c5498760ae704885281a9026e4a4  debian-8.1-console-armhf-2015-08-17.tar.xz

Unpack Image:

tar xf debian-8.1-console-armhf-2015-08-17.tar.xz
cd debian-8.1-console-armhf-2015-08-17

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.08 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2015-08-17
    • Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-stretch-console-armhf-2015-08-17.tar.xz

Verify Image with:

md5sum debian-stretch-console-armhf-2015-08-17.tar.xz
b10a5e002914fed3914e395591bf23c2  debian-stretch-console-armhf-2015-08-17.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2015-08-17.tar.xz
cd debian-stretch-console-armhf-2015-08-17

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-08-17
    • BeagleBone Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone Black/Green: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone Black/Green: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb*
c4bb38cb3aa760ad75e8ef5272b33b0c  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
3ca10baec660c293429f25cfc6990617  BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • Beagle: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • Beagle: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle: v4.1.0-rc7-armv7-x0 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bb-debian-8.1-console-armhf-2015-08-17-2gb*
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
0cbd47261bdd1b876e829c062789233a  bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bb-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • Beagle xM: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • Beagle xM: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle xM: v4.1.0-rc7-armv7-x0 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bbxm-debian-8.1-console-armhf-2015-08-17-2gb*
b0b8f64aac92f5cc280413a80b959a6d  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
b042dec7d980562cfbb4414ad5ce5cde  bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bone-debian-8.1-console-armhf-2015-08-17-2gb*
0561042d4f3cf806fbbd88d84777bbc4  bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
61cda9556caf4e6ba81421d6d5ba8f3d  bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bone-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb*
d03f202299266eec0ef9d730aec6c77a  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
8a0dd02bc637345a8891b75d5c5899bb  omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bbx15-debian-8.1-console-armhf-2015-08-17-2gb*
6113cf783d5cbd302d0d669cd94ea90c  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
66534f87f3e62d22386714214027a9d4  bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap \
bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x-ti or 4.1.x kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade