Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (gst-dsp: sync git gst-dsp changes from the ubuntu page....)
m (2015-09-11)
(117 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
 
 
*armhf
 
** Port Details: http://wiki.debian.org/ArmHardFloatPort
 
** Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
 
= Help =
 
= Help =
Line 16: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.2.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.6.x) branch]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 28: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
Line 37: Line 34:
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
 
== Debian Squeeze ==
 
  
git clone git://github.com/RobertCNelson/netinstall.git
+
== Debian 8 (jessie) ==
cd netinstall
 
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 
 
"board" Options:
 
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx    - beagle_cx
 
*BeagleBoard xMA/B/C    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax - panda
 
*PandaBoard ES - panda_es
 
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
 
*Options:
 
*Options:
**--uboot : beagle, panda, bone
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
 +
= Demo Image =
  
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.2.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.1.y -b tmp
 +
./build_kernel.sh
  
==Beagleboard: NetInstall==
+
== Debian (jessie) ==
  
Choose a language
+
Default username/password:
  C - No localization
+
*username: debian
  English - English
+
*password: temppwd
  
Configure the network:
+
Image Updated:
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
*2015-09-11
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
+
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
  eth0: Ethernet <- Your usb-ethernet device
+
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
+
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBoard xM: v4.1.5-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard xM: v4.1.1-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
  
===usb0 howto===
+
Services Active:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
  
Configuring usb0 network bridge for 2.6.29:
+
Default user: debian pass: temppwd
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
 
  # ifconfig ethX 0.0.0.0
 
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-8.2-console-armhf-2015-09-11.tar.xz
  
  Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
Verify Image with:
  Logical Volume Manager not available: <Continue>
+
  md5sum debian-8.2-console-armhf-2015-09-11.tar.xz
 +
a295d3e68aecae25ffc4bbc1e134e13f  debian-8.2-console-armhf-2015-09-11.tar.xz
  
  Partition disks:
+
Unpack Image:
  Guided - Use the largest continuous free space
+
  tar xf debian-8.2-console-armhf-2015-09-11.tar.xz
 +
cd debian-8.2-console-armhf-2015-09-11
  
  Partitioning scheme....
+
If you don't know the location of your SD card:
 +
  sudo ./setup_sdcard.sh --probe-mmc
  
Example:
+
You should see something like:
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
 
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
  No installable kernel was found in the defined APT sources? :
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
  Continue without installing a kernel? : <yes>
 
 
 
Standard System
 
 
 
No BootLoader: <ok>
 
 
 
==Beagleboard: Install Latest Kernel==
 
 
 
Script File:
 
 
 
Lenny:
 
wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
 
sudo /bin/bash install-me.sh
 
 
Squeeze:
 
export DIST=squeeze
 
export ARCH=armel
 
 
   
 
   
  Beagle/Panda
+
  fdisk -l:
  export BOARD=omap
+
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
  Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  BeagleBone
+
  lsblk:
  export BOARD=omap-psp
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
   
+
  sda      8:0    0 465.8G  0 disk
  wget http://rcn-ee.net/deb/${DIST}-${ARCH}/LATEST-${BOARD}
+
  ├─sda1  8:1    0 446.9G  0 part / '''<- x86 Root Partition'''
  wget $(cat ./LATEST-${BOARD} | grep STABLE | awk '{print $3}')
+
├─sda2  8:2    0    1K  0 part
  /bin/bash install-me.sh
+
  └─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
  └─sdd2  8:50  1  3.6G  0 part
  
Reboot with your new Kernel
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
= Demo Image =
+
Install Image:
  
== Debian Wheezy snapshot ==
+
Quick install script for [board]
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
Default username/password:
+
board options:
*username: debian
+
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
*password: temppwd
+
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
  
Default root user/password
+
So for the BeagleBoard xM:
*user: root
+
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
*password: root
 
  
Image Updated:
+
Advanced: Build Image:
*2012-11-29
 
** Beagle/Panda ES: v3.6.8-x4 kernel
 
** Panda: v3.2.34-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
 
** Bone: v3.2.33-psp26 kernel (next release should be v3.7.x based)
 
* October 19th
 
** Beagle/Panda ES: v3.6.2-x3 kernel
 
** Panda: v3.2.32-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
 
** Bone: v3.2.32-psp25 kernel
 
* September 27th
 
** Beagle/Panda: v3.2.30-x14 kernel
 
** Bone: v3.2.30-psp23 kernel
 
* September 10th
 
** Beagle/Panda: v3.2.28-x14 kernel
 
** Bone: v3.2.28-psp21 kernel (not with "backlight" support for CircuitCo LCD3)
 
*July 29th: 2012-07-29
 
** Beagle/Panda: v3.2.24-x14 kernel
 
** Bone: v3.2.23-psp18 kernel
 
*July 16th: 2012-07-16
 
** Beagle/Panda: v3.2.23-x14 kernel
 
** Bone: v3.2.21-psp16 kernel
 
*June 12th: 2012-06-10
 
** Beagle/Panda: v3.2.19-x13 kernel
 
** Bone: v3.2.18-psp14 kernel (now supports the BeagleBone LCD from CircuitCo)
 
  
Services Active:
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
  Note: Depending on your internal network these may work out the box
+
  cd omap-image-builder
Apache, Port 80: http://arm/
+
  git checkout v2015.09 -b tmp
  SSH, Port 22: ssh ubuntu@arm
 
  Getty, Serial Port
 
  
Get prebuilt image:
+
Stable:
  
  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
mirrors (will take some time to update):
 
wget http://ynezz.ibawizard.net/beagleboard/wheezy/debian-wheezy-minimal-armhf-2012-11-29.tar.xz
 
  
Verify Image with:  
+
Testing:
md5sum debian-wheezy-minimal-armhf-2012-11-29.tar.xz
 
60e6897c9e85383324e920c177a8c4ae  debian-wheezy-minimal-armhf-2012-11-29.tar.xz
 
  
Unpack Image:
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
  tar xJf debian-wheezy-minimal-armhf-2012-11-29.tar.xz
 
cd debian-wheezy-minimal-armhf-2012-11-29
 
  
Install Image:
+
== Debian Testing (stretch) ==
  
Quick Install script for "board"
+
Image Updated:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
+
*2015-09-11
 +
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBoard xM: v4.1.5-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard xM: v4.1.1-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
  
"board" options:  
+
Get prebuilt image:
*BeagleBoard Ax/Bx - beagle_bx
+
wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-stretch-console-armhf-2015-09-11.tar.xz
*BeagleBoard Cx/Dx - beagle_cx
 
*BeagleBoard xM    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax    - panda
 
*PandaBoard ES    - panda_es
 
  
So For the BeagleBoard xM:
+
Verify Image with:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
  md5sum debian-stretch-console-armhf-2015-09-11.tar.xz
 +
43ce932006909accc8211087c7801e9e  debian-stretch-console-armhf-2015-09-11.tar.xz
  
*Additional Options
+
Unpack image:
** --rootfs <ext4 default>
+
tar xf debian-stretch-console-armhf-2015-09-11.tar.xz
** --swap_file <swap file size in MB's>
+
cd debian-stretch-console-armhf-2015-09-11
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
= Debian Configuration =
+
Then follow the directions shown above with the other images...
  
== Serial Ports ==
+
= Flasher =
  
Lenny
+
== eMMC: BeagleBone Black/Green ==
  
edit /etc/inittab and add:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  S:2345:respawn:/sbin/getty 115200 ttyS2
 
  
For root access over the serial port add ttyS2 to /etc/securetty
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
 +
This script will only take about 5-6 Minutes after power on.
  
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Squeeze
+
User: debian
 +
pass: temppwd
  
edit /etc/inittab and add:
+
Image Updated:
S:2345:respawn:/sbin/getty 115200 ttyO2
+
*2015-09-11
 +
** BeagleBone Black/Green: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBone Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone Black/Green: v4.1.1-ti-r2 kernel
  
== WiFi ==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
 +
c1d6d43fc1cb1277ee6375899395947e  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
369f0634a53a6802a5815d6bfbaea793  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
== SGX Video Acceleration ==
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
=== SGX armel/armhf v3.4.x+ ===
+
Linux: (dd)
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
+
unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
== eMMC: BeagleBoard-X15 ==
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
git clone git://github.com/RobertCNelson/stable-kernel.git
 
  cd stable-kernel
 
git checkout origin/v3.6.x -b v3.6.x
 
./build_kernel.sh (and then follow the directions as the script runs...)
 
  
Build kernel
+
Script for reference: (this is the script that writes to the eMMC)
  ./build_kernel.sh
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Build SGX modules
+
This script will only take about 5-6 Minutes after power on.
./sgx_build_modules.sh
 
  
Insert SD card, make sure to modify MMC in system.sh
+
Notes:
./tools/install_image.sh
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Place SD card into the device and boot...
+
User: debian
cd /opt/sgx
+
pass: temppwd
sudo tar xf GFX_4.0*_libs.tar.gz
 
sudo ./install-sgx.sh
 
  
Reboot, check modules (lsmod):
+
Image Updated:
Module                  Size  Used by
+
*2015-09-11
bufferclass_ti          5727  0
+
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
omaplfb                11512  0
 
pvrsrvkm              165208  2 bufferclass_ti,omaplfb
 
  
Blit Test:
+
Get prebuilt image:
  ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
+
  wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
------------------ SGX 3D Blit test -----------------
+
  wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
----------------------- Start -----------------------
 
Call PVRSRVConnect with a valid argument:
 
  OK
 
Get number of devices from PVRSRVEnumerateDevices:
 
  OK
 
.... Reported 1 devices
 
.... Device Number  | Device Type
 
            0000    | PVRSRV_DEVICE_ID_SGX
 
Attempt to acquire device 0:
 
  OK
 
Getting SGX Client info
 
  OK
 
.... ui32ProcessID:1133
 
Display Class API: enumerate devices
 
  OK
 
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
  OK
 
Display Class API: open device
 
  OK
 
Display Class API: Get display info
 
  OK
 
.... Name:PowerVR OMAP Linux Display Driver
 
.... MaxSwapChains:1
 
.... MaxSwapChainBuffers:1
 
.... MinSwapInterval:0
 
.... MaxSwapInterval:1
 
Display Class API: enumerate display formats
 
  OK
 
  OK
 
.... Display format 0 - Pixelformat:1
 
Display Class API: enumerate display dimensions
 
  OK
 
  OK
 
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
Attempt to create memory context for SGX:
 
  OK
 
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
  .... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
Display Class API: get the system (primary) buffer
 
  OK
 
Display Class API: map display surface to SGX
 
  OK
 
Attempt to create transfer context for SGX:
 
  OK
 
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
(bottom right quadrant should be red on blue background):
 
  OK
 
  OK
 
Do a SRCCOPY blit to the top left quadrant of the display:
 
(top left quadrant should be striped (r/g/b/w) on blue background):
 
  OK
 
  OK
 
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
(top right quadrant should be yellow):
 
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
  OK
 
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
and then present the RGB565 to the bottom right quadrant of the screen
 
(bottom right quadrant should be a red gradient):
 
  OK
 
  OK
 
  OK
 
  OK
 
Free the off screen surfaces:
 
  OK
 
  OK
 
  OK
 
  OK
 
Destroy the transfer context:
 
  OK
 
Display Class API: unmap display surface from SGX
 
  OK
 
Destroy Device Memory Context
 
Display Class API: close the device
 
  OK
 
Release SGX Client Info:
 
  OK
 
Disconnect from services:
 
  OK
 
------------------ SGX 3D Blit test -----------------
 
------------------------ End ------------------------
 
  
=== SGX Legacy armel only upto v3.2.x ===
+
Verify Image with:
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+
md5sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
 +
73962f12d6b75d881e91449c448e942c  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
dc1f3ea4f726e58ff4bf6d9215463332  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Linux: (bmaptool 3.2)
  https://github.com/RobertCNelson/stable-kernel
+
sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
Linux: (dd)
  https://github.com/RobertCNelson/stable-kernel/issues/8
+
  unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  oneiric:
+
  sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
 
/bin/bash install-me.sh
 
  
==== SDK unPackage Script ====
+
= raw microSD img =
  
Download the latest version of the "create_sgx_package.sh" script
+
== BeagleBoard xM ==
2.6.37
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
 
2.6.38->3.2.x
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
 
  
Make script executable
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
chmod a+x ./create_sgx_package_*.sh
 
  
Run script
+
User: debian
./create_sgx_package_*.sh
+
pass: temppwd
  
After Successfully running:
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
:~/temp$ ls
+
Image Updated:
create_sgx_package.sh
+
*2015-09-11
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
+
*2015-08-17
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
+
** BeagleBoard xM: v4.1.5-armv7-x2 kernel
SDK
+
*2015-07-08
SDK_BIN
+
** BeagleBoard xM: v4.1.1-armv7-x1 kernel
  
==== Beagle: GFX_*_libs.tar.gz ====
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
  tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
Verify Image with:
  ./install-SGX.sh (copies necessary SGX libs and startup script)
+
  md5sum bbxm-debian-8.2-console-armhf-2015-09-11-2gb*
  ./run-SGX.sh (force run the new init script, or you can just reboot...)
+
  8b5304c850bce450f259658005424e45  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
  e522d84a324bc32ce3ba1cee5774ee95  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
On successful install:
+
Linux: (bmaptool 3.2)
  Stopping PVR
+
  sudo bmaptool copy --bmap bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
  Starting PVR
+
  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
Linux: (dd)
  sudo reboot
+
unxz bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
  sudo dd if=./bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
== BeagleBone White/Black/Green ==
  
tar xf GFX_Linux_SDK.tar.gz
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
cd GFX_Linux_SDK
 
tar xf OGLES.tar.gz
 
  
==== Test SGX with a DEMO ====
+
User: debian
 +
pass: temppwd
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Auto partition resize:
  ./OGLESEvilSkull
+
  cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
==== Trouble Shooting ====
+
Image Updated:
 +
*2015-09-11
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
  
  sudo rm /etc/powervr-esrev
+
Get prebuilt image:
sudo depmod -a omaplfb
+
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  sudo /etc/init.d/pvr restart
+
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
== DSP ==
+
Verify Image with:
 +
md5sum bone-debian-8.2-console-armhf-2015-09-11-2gb*
 +
868ff8c2932d217525a63251ced2a4a2  bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
e79c556c24300275cc0c4d51009eff85  bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
== DSP ==
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
=== gst-dsp ===
+
Linux: (dd)
 +
unxz bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./bone-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
The following Gstreamer elements will be installed:
+
== OMAP5432 uEVM ==
  
  $ gst-inspect | grep dsp
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  dvdspu: dvdspu: Sub-picture Overlay
 
  dsp:  dspdummy: DSP dummy element
 
  dsp:  dspvdec: DSP video decoder
 
  dsp:  dspadec: DSP audio decoder
 
  dsp:  dsph263enc: DSP video encoder
 
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
 
  dsp:  dspjpegenc: DSP video encoder
 
  dsp:  dsph264enc: DSP video encoder
 
  dsp:  dspvpp: DSP VPP filter
 
  dsp:  dspipp: DSP IPP
 
  
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
User: debian
 +
pass: temppwd
  
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
Auto partition resize:
  ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+
  cd /opt/scripts/tools
  CONFIG_TIDSPBRIDGE=m
+
  git pull
  CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
+
  ./grow_partition.sh
CONFIG_TIDSPBRIDGE_RECOVERY=y
+
  sudo reboot
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
  # CONFIG_TIDSPBRIDGE_BACKTRACE is not set
 
  
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
Image Updated:
 +
*2015-09-11
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
  
Download the latest version of the "create_dsp_package.sh" script
+
Get prebuilt image:
  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
+
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
Make script executable
+
Verify Image with:
  chmod a+x ./create_dsp_package.sh
+
  md5sum omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb*
 +
b4c803ffe5ca67d004c24934c5243c0c  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
94f3d33c7643a3b10bce07854f1b4a4d  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
Package script:
+
Linux: (bmaptool 3.2)
  ./create_dsp_package.sh
+
  sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
Copy DSP_Install_libs.tar.gz to Beagle
+
Linux: (dd)
 +
unxz omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
Setup network...
+
== BeagleBoard-X15 ==
  
Extract:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
 
  
Install:
+
User: debian
ubuntu@arm:~$ ./install-DSP.sh
+
pass: temppwd
  
What got installed:
+
Auto partition resize:
  ubuntu@arm:~$ ls -lh /lib/dsp/
+
  cd /opt/scripts/tools
  total 7.1M
+
  git pull
  -rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
+
  ./grow_partition.sh
-rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
+
  sudo reboot
-rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
 
-rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
 
  -rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
 
-rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
 
-rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
 
-rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
 
-rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
 
-rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
 
-rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
 
-rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
 
  
Building gst-dsp stuff:
+
Image Updated:
 +
*2015-09-11
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
  
If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
Update arm tools directory to the latest:
+
Verify Image with:
  ubuntu@arm:~$ cd /boot/uboot/tools/
+
  md5sum bbx15-debian-8.2-console-armhf-2015-09-11-2gb*
  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+
f736bb5a56778d596bca87d9cfc9c68a  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
  cc71854da5e67d262c2acd2acab1ef30  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
Otherwise, install via git:
+
Linux: (bmaptool 3.2)
  git clone git://github.com/RobertCNelson/tools.git
+
sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
Change to the pkgs directory
+
Linux: (dd)
  ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
+
  unxz bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  (or if just cloned)
+
  sudo dd if=./bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
ubuntu@arm:~$ cd ~/tools/pkgs
 
  
Build gst-dsp stuff..
+
= Debian Configuration =
./ti-tidspbridge.sh
 
  
Start dspbridge (or just reboot)
+
==Install Latest Kernel Image==
sudo /etc/init.d/dsp_init start
 
  
Test dspbridge
+
Script:
  sudo dsp-test
+
  cd /opt/scripts/tools
 +
git pull
  
Playbin:
+
Stable:
  sudo gst-launch playbin2 uri=file://(file)
+
  ./update_kernel.sh
  
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
Testing:
  Note: it seems broken in Ubuntu precise armhf...
+
  ./update_kernel.sh --beta-kernel
  
  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
Custom: (has to be on rcn-ee.net)
 +
  ./update_kernel.sh --kernel v3.8.13-bone69
  
== Xorg omapfb Drivers ==
+
Reboot with your new Kernel Image.
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Xorg Drivers ==
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
/etc/X11/xorg.conf:
+
BeagleBoard/PandaBoard:
  Section "Device"
+
  cd /opt/scripts/tools/graphics/
Identifier "Configured Video Device"
+
  ./ti-omapdrm.sh
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
BeagleBone/BeagleBone Black:
(II) FBDEV: driver for framebuffer: fbdev
+
  cd /opt/scripts/tools/graphics/
  (II) FBDEV(0): using default device
+
  ./ti-tilcdc.sh
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== SGX Drivers ==
  
xvinfo -display :0.0
+
=== SGX BeagleBone/BeagleBone Black ===
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
Install sgx modules (3.14.x-ti or 4.1.x kernel):
 +
sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
  sudo update-initramfs -uk `uname -r`
  
Lenny:
+
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Squeeze/Sid:
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo apt-get install xserver-xorg-video-omap3
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
  cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
=== xorg.conf ===
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
/etc/X11/xorg.conf
+
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
Section "Monitor"
+
Verify omaplfb & pvrsrvkm loaded
    Identifier "Configured Monitor"
+
  debian@arm:~$ lsmod | grep omaplfb
  EndSection
+
  omaplfb                12065 0
   
+
  pvrsrvkm              178782 1 omaplfb
  Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
  EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
= Building Kernel =
  
cat /var/log/Xorg.0.log | grep omapfb
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
xvinfo -display :0.0
+
== BeagleBone ==
  X-Video Extension version 2.2
+
  http://eewiki.net/display/linuxonarm/BeagleBone
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
https://github.com/RobertCNelson/stable-kernel
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
Download SRC
+
= Upgrading from Debian 5 to Debian 6 =
git clone git://github.com/RobertCNelson/stable-kernel.git
 
  
Build Kernel
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
./build_kernel.sh
 
  
Optional Building Deb File
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
./build_deb.sh
 
  
= Upgrading from Debian 5 to Debian 6 =
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
  
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
+
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 12:52, 11 September 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.2.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.1.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBoard xM: v4.1.5-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-8.2-console-armhf-2015-09-11.tar.xz

Verify Image with:

md5sum debian-8.2-console-armhf-2015-09-11.tar.xz
a295d3e68aecae25ffc4bbc1e134e13f  debian-8.2-console-armhf-2015-09-11.tar.xz

Unpack Image:

tar xf debian-8.2-console-armhf-2015-09-11.tar.xz
cd debian-8.2-console-armhf-2015-09-11

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.09 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBoard xM: v4.1.5-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-stretch-console-armhf-2015-09-11.tar.xz

Verify Image with:

md5sum debian-stretch-console-armhf-2015-09-11.tar.xz
43ce932006909accc8211087c7801e9e  debian-stretch-console-armhf-2015-09-11.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2015-09-11.tar.xz
cd debian-stretch-console-armhf-2015-09-11

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-09-11
    • BeagleBone Black/Green: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBone Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone Black/Green: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
c1d6d43fc1cb1277ee6375899395947e  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
369f0634a53a6802a5815d6bfbaea793  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-09-11
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
73962f12d6b75d881e91449c448e942c  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
dc1f3ea4f726e58ff4bf6d9215463332  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
  • 2015-08-17
    • BeagleBoard xM: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • BeagleBoard xM: v4.1.1-armv7-x1 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bbxm-debian-8.2-console-armhf-2015-09-11-2gb*
8b5304c850bce450f259658005424e45  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
e522d84a324bc32ce3ba1cee5774ee95  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bone-debian-8.2-console-armhf-2015-09-11-2gb*
868ff8c2932d217525a63251ced2a4a2  bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap
e79c556c24300275cc0c4d51009eff85  bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bone-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb*
b4c803ffe5ca67d004c24934c5243c0c  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
94f3d33c7643a3b10bce07854f1b4a4d  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bbx15-debian-8.2-console-armhf-2015-09-11-2gb*
f736bb5a56778d596bca87d9cfc9c68a  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap
cc71854da5e67d262c2acd2acab1ef30  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x-ti or 4.1.x kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade