Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Beagleboard: Install Latest Kernel: update to the latest stable release for lenny/squeeze)
m (2015-09-11)
(159 intermediate revisions by 12 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel Stable Kernel 2.6.39 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/3.0-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 23: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Squeeze ==
+
== Debian 8 (jessie) ==
  
  git clone git://github.com/RobertCNelson/netinstall.git
+
Quick Install script for "board"
cd netinstall
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
  
Install script for Beagle Bx
+
So For the BeagleBoard xM:
  ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_bx --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 
 
Install script for Beagle Cx, xM A/B/C
 
./mk_mmc.sh --mmc /dev/sdX --uboot beagle --distro squeeze
 
 
 
Install script for Panda
 
./mk_mmc.sh --mmc /dev/sdX --uboot panda --distro squeeze
 
  
 
*Options:
 
*Options:
**--uboot : beagle, (panda only serial, display not working)
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
**--usb-rootfs : (uImage on /dev/mmcblkp0 and rootfs on external usb drive /dev/sda1)
+
= Demo Image =
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.2.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.1.y -b tmp
 +
./build_kernel.sh
  
Note: The default options work for most people, but if you'd like to tweak boot settings, edit these before running the script.
+
== Debian (jessie) ==
+
 
NetInstall boot Settings:
+
Default username/password:
gedit ./netinstall/scripts/dvi.cmd
+
*username: debian
gedit ./netinstall/scripts/serial.cmd
+
*password: temppwd
 
Normal Boot Settings:
 
gedit ./netinstall/scripts/dvi-normal-squeeze.cmd
 
gedit ./netinstall/scripts/serial-normal-squeeze.cmd
 
  
==Beagleboard: NetInstall==
+
Image Updated:
 +
*2015-09-11
 +
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBoard xM: v4.1.5-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard xM: v4.1.1-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
  
  Choose a language
+
Services Active:
  C - No localization
+
  Note: Depending on your internal network these may work out of the box
  English - English
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
  
Configure the network:
+
Default user: debian pass: temppwd
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
 
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
 
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Get prebuilt image:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-8.2-console-armhf-2015-09-11.tar.xz
  
Configuring usb0 network bridge for 2.6.29:
+
Verify Image with:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
md5sum debian-8.2-console-armhf-2015-09-11.tar.xz
  # ifconfig ethX 0.0.0.0
+
a295d3e68aecae25ffc4bbc1e134e13f  debian-8.2-console-armhf-2015-09-11.tar.xz
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Unpack Image:
 +
  tar xf debian-8.2-console-armhf-2015-09-11.tar.xz
 +
cd debian-8.2-console-armhf-2015-09-11
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
If you don't know the location of your SD card:
  Logical Volume Manager not available: <Continue>
+
sudo ./setup_sdcard.sh --probe-mmc
  
Partition disks:
+
You should see something like:
  Guided - Use the largest continuous free space
 
  
  Partitioning scheme....
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
Example:
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
 
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
No installable kernel was found in the defined APT sources? :  
+
Install Image:
  Continue without installing a kernel? : <yes>
 
  
  Standard System
+
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
No BootLoader: <ok>
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
  
==Beagleboard: Install Latest Kernel==
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
Script File:
+
Advanced: Build Image:
  
  Lenny:
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
+
  cd omap-image-builder
sudo /bin/bash install-me.sh
+
  git checkout v2015.09 -b tmp
   
 
Squeeze:
 
export DIST=squeeze
 
wget http://rcn-ee.net/deb/${DIST}/LATEST-omap
 
  wget $(cat ./LATEST-omap | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new Kernel
+
Stable:
  
= Debian armhf port =
+
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
  
The armhf port of Debian is still only on the ports server, it hasn't been merged to main..
+
Testing:
  
Port Details: http://wiki.debian.org/ArmHardFloatPort
+
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
== armhf Demo Image ==
+
== Debian Testing (stretch) ==
  
Default user: debian pass: temppwd
+
Image Updated:
Default root user: root pass: root
+
*2015-09-11
 +
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBoard xM: v4.1.5-armv7-x2 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard xM: v4.1.1-armv7-x1 kernel
 +
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-stretch-console-armhf-2015-09-11.tar.xz
 +
 +
Verify Image with:
 +
md5sum debian-stretch-console-armhf-2015-09-11.tar.xz
 +
43ce932006909accc8211087c7801e9e  debian-stretch-console-armhf-2015-09-11.tar.xz
  
  wget http://rcn-ee.net/deb/rootfs/unstable/unstable-minimal-armhf-omap-2011-07-10.tar.xz
+
Unpack image:
  mirrors (will take some time to update):
+
  tar xf debian-stretch-console-armhf-2015-09-11.tar.xz
wget http://ynezz.ibawizard.net/beagleboard/unstable/unstable-minimal-armhf-omap-2011-07-10.tar.xz
+
  cd debian-stretch-console-armhf-2015-09-11
  
Verify Image with:
+
Then follow the directions shown above with the other images...
md5sum unstable-minimal-armhf-omap-2011-07-10.tar.xz
 
0f7caad69252aaf8d24c58b8241fe07c  unstable-minimal-armhf-omap-2011-07-10.tar.xz
 
  
Unpack Image:
+
= Flasher =
tar xJf unstable-minimal-armhf-omap-2011-07-10.tar.xz
 
cd unstable-minimal-armhf-omap-2011-07-10
 
  
Install Image:
+
== eMMC: BeagleBone Black/Green ==
  
Quick Install script for Beagle Bx
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_bx
 
  
Quick Install script for Beagle Cx, xM A/B/C
+
Script for reference: (this is the script that writes to the eMMC)
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle
+
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Quick Install script for Panda
+
This script will only take about 5-6 Minutes after power on.
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot panda
 
  
*Additional Options
+
Notes:
** --rootfs <ext4 default>
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
** --swap_file <swap file size in MB's>
+
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
** --addon <pico>
 
  
You should now be able to unmount the SD card from you PC, insert into your BeagleBoard, reboot and have Ubuntu Maverick loaded.
+
User: debian
 +
pass: temppwd
  
Advanced: Build Image:
+
Image Updated:
 +
*2015-09-11
 +
** BeagleBone Black/Green: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBone Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone Black/Green: v4.1.1-ti-r2 kernel
  
fixup.sh: https://github.com/RobertCNelson/omap-image-builder/raw/master/tools/fixup.sh
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
Built with rootstock trunk (ARM native mode, run directly on beagleboard):
+
Verify Image with:
  sudo ./rootstock --fqdn omap --imagesize 2G --dist unstable --serial ttyO2 \
+
  md5sum BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
--login debian --password temppwd \
+
  c1d6d43fc1cb1277ee6375899395947e  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  --seed initramfs-tools,btrfs-tools,i2c-tools,nano,pastebinit,uboot-envtools,uboot-mkimage,usbutils,wget,wireless-tools,wpasupplicant \
+
369f0634a53a6802a5815d6bfbaea793  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
--script fixup.sh --components "main" --arch armhf --mirror http://ftp.debian-ports.org/debian/ \
 
--kernel-image http://rcn-ee.net/deb/unstable/v2.6.39.3-x2/linux-image-2.6.39.3-x2_1.0unstable_armhf.deb
 
  
== rootstock for armhf ==
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
Using: https://github.com/RobertCNelson/project-rootstock
+
Linux: (dd)
 +
unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
Must have, these options for debian armhf...
+
== eMMC: BeagleBoard-X15 ==
--components "main" --arch armhf --mirror http://ftp.debian-ports.org/debian/
 
  
= Debian Configuration =
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
== Serial Ports ==
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Lenny
+
This script will only take about 5-6 Minutes after power on.
  
edit /etc/inittab and add:
+
Notes:
S:2345:respawn:/sbin/getty 115200 ttyS2
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
For root access over the serial port add ttyS2 to /etc/securetty
+
User: debian
 +
pass: temppwd
  
 +
Image Updated:
 +
*2015-09-11
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
  
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
Squeeze
+
Verify Image with:
 +
md5sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
 +
73962f12d6b75d881e91449c448e942c  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
dc1f3ea4f726e58ff4bf6d9215463332  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
edit /etc/inittab and add:
+
Linux: (bmaptool 3.2)
  S:2345:respawn:/sbin/getty 115200 ttyO2
+
sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
== WiFi ==
+
Linux: (dd)
 +
unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
= raw microSD img =
  
== SGX Video Acceleration ==
+
== BeagleBoard xM ==
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  https://github.com/RobertCNelson/stable-kernel
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
User: debian
 +
pass: temppwd
  
=== SDK unPackage Script ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Download the latest version of the "create_sgx_package.sh" script
+
Image Updated:
2.6.37
+
*2015-09-11
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package_2.6.37.sh
+
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
2.6.38+
+
*2015-08-17
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package.sh
+
** BeagleBoard xM: v4.1.5-armv7-x2 kernel
 +
*2015-07-08
 +
** BeagleBoard xM: v4.1.1-armv7-x1 kernel
  
Make script executable
+
Get prebuilt image:
  chmod a+x ./create_sgx_package.sh
+
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
Run script
+
Verify Image with:
  ./create_sgx_package.sh
+
  md5sum bbxm-debian-8.2-console-armhf-2015-09-11-2gb*
 +
8b5304c850bce450f259658005424e45  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
e522d84a324bc32ce3ba1cee5774ee95  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
After Successfully running:
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
:~/temp$ ls
+
Linux: (dd)
  create_sgx_package.sh
+
  unxz bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  sudo dd if=./bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
== BeagleBone White/Black/Green ==
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
User: debian
Stopping PVR
+
pass: temppwd
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Image Updated:
 +
*2015-09-11
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
  
  tar xf GFX_Linux_SDK.tar.gz
+
Get prebuilt image:
  cd GFX_Linux_SDK
+
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
tar xf OGLES.tar.gz
+
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
=== Test SGX with a DEMO ===
+
Verify Image with:
 +
md5sum bone-debian-8.2-console-armhf-2015-09-11-2gb*
 +
868ff8c2932d217525a63251ced2a4a2  bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
e79c556c24300275cc0c4d51009eff85  bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux: (bmaptool 3.2)
  ./OGLESEvilSkull
+
  sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
  bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
=== Trouble Shooting ===
+
Linux: (dd)
 +
unxz bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./bone-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
sudo rm /etc/powervr-esrev
+
== OMAP5432 uEVM ==
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
=== gst-dsp ===
+
User: debian
 +
pass: temppwd
  
Seems to work on all Beagle's, with atleast 2.6.38+ now...
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Requirements: 2.6-stable from launchpad or 2.6.38+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Image Updated:
  https://github.com/RobertCNelson/stable-kernel
+
*2015-09-11
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
  
Download the latest version of the "create_dsp_package.sh" script
+
Get prebuilt image:
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_dsp_package.sh
+
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
 
 +
Verify Image with:
 +
md5sum omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb*
 +
b4c803ffe5ca67d004c24934c5243c0c  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
94f3d33c7643a3b10bce07854f1b4a4d  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
 
 +
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
Make script executable
+
Linux: (dd)
  chmod a+x ./create_dsp_package.sh
+
  unxz omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
Package script:
+
== BeagleBoard-X15 ==
./create_dsp_package.sh
 
  
Copy DSP_Install_libs.tar.gz to beagle
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
Setup network...
+
User: debian
 +
pass: temppwd
  
Extract:
+
Auto partition resize:
  tar xf DSP_Install_libs.tar.gz
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Install
+
Image Updated:
./install-DSP.sh
+
*2015-09-11
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
 +
*2015-08-17
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
  
Build gst-dsp stuff..
+
Get prebuilt image:
  ./install-gst-dsp.sh
+
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
  wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap
  
Playbin:
+
Verify Image with:
  sudo gst-launch playbin2 uri=file://(file)
+
  md5sum bbx15-debian-8.2-console-armhf-2015-09-11-2gb*
 +
f736bb5a56778d596bca87d9cfc9c68a  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap
 +
cc71854da5e67d262c2acd2acab1ef30  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
  
== Xorg omapfb Drivers ==
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
 +
bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
Linux: (dd)
 +
unxz bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
 +
sudo dd if=./bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
= Debian Configuration =
  
/etc/X11/xorg.conf:
+
==Install Latest Kernel Image==
Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
Script:
  (II) FBDEV: driver for framebuffer: fbdev
+
cd /opt/scripts/tools
(II) FBDEV(0): using default device
+
  git pull
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
Stable:
 +
./update_kernel.sh
  
xvinfo -display :0.0
+
Testing:
  X-Video Extension version 2.2
+
  ./update_kernel.sh --beta-kernel
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Custom: (has to be on rcn-ee.net)
 +
./update_kernel.sh --kernel v3.8.13-bone69
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
Reboot with your new Kernel Image.
  
Lenny:
+
== Xorg Drivers ==
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
Squeeze/Sid:
+
Script:
  sudo apt-get install xserver-xorg-video-omap3
+
cd /opt/scripts/tools/
 +
  git pull
  
=== xorg.conf ===
+
BeagleBoard/PandaBoard:
/etc/X11/xorg.conf
+
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Section "Monitor"
+
BeagleBone/BeagleBone Black:
    Identifier "Configured Monitor"
+
  cd /opt/scripts/tools/graphics/
  EndSection
+
  ./ti-tilcdc.sh
   
+
 
Section "Screen"
+
== SGX Drivers ==
    Identifier "Default Screen"
+
 
    Device "Configured Video Device"
+
=== SGX BeagleBone/BeagleBone Black ===
    #Limited by SGX?
+
 
    DefaultDepth 16
+
Note, these are FBDEV only, no xorg/x11/etc...
  EndSection
+
 
   
+
Install sgx modules (3.14.x-ti or 4.1.x kernel):
  Section "Device"
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
    Identifier "Configured Video Device"
+
  sudo depmod -a `uname -r`
    Driver "omapfb"
+
  sudo update-initramfs -uk `uname -r`
    Option "fb" "/dev/fb0"
+
 
  EndSection
+
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
To verify it was correctly installed, reboot and:
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
cat /var/log/Xorg.0.log | grep omapfb
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
  (II) LoadModule: "omapfb"
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
  (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
+
  cd /opt/gfxinstall/
  (II) Module omapfb: vendor="X.Org Foundation"
+
  sudo ./sgx-install.sh
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
+
  sudo reboot
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
  (II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
xvinfo -display :0.0
+
= Building Kernel =
X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
https://github.com/RobertCNelson/stable-kernel
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
Download SRC
+
== BeagleBone ==
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
Build Kernel
+
== BeagleBone Black ==
  ./build_kernel.sh
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Optional Building Deb File
+
== Panda/Panda ES ==
  ./build_deb.sh
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
 
= Upgrading from Debian 5 to Debian 6 =
 
= Upgrading from Debian 5 to Debian 6 =
  
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 +
 +
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
 +
 +
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
 +
 +
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 12:52, 11 September 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.2.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.1.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBoard xM: v4.1.5-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-8.2-console-armhf-2015-09-11.tar.xz

Verify Image with:

md5sum debian-8.2-console-armhf-2015-09-11.tar.xz
a295d3e68aecae25ffc4bbc1e134e13f  debian-8.2-console-armhf-2015-09-11.tar.xz

Unpack Image:

tar xf debian-8.2-console-armhf-2015-09-11.tar.xz
cd debian-8.2-console-armhf-2015-09-11

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.09 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBoard xM: v4.1.5-armv7-x2 kernel
    • BeagleBone/BeagleBone Black: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/elinux/debian-stretch-console-armhf-2015-09-11.tar.xz

Verify Image with:

md5sum debian-stretch-console-armhf-2015-09-11.tar.xz
43ce932006909accc8211087c7801e9e  debian-stretch-console-armhf-2015-09-11.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2015-09-11.tar.xz
cd debian-stretch-console-armhf-2015-09-11

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-09-11
    • BeagleBone Black/Green: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBone Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone Black/Green: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
c1d6d43fc1cb1277ee6375899395947e  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
369f0634a53a6802a5815d6bfbaea793  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-09-11
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb*
73962f12d6b75d881e91449c448e942c  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap
dc1f3ea4f726e58ff4bf6d9215463332  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
  • 2015-08-17
    • BeagleBoard xM: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • BeagleBoard xM: v4.1.1-armv7-x1 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bbxm-debian-8.2-console-armhf-2015-09-11-2gb*
8b5304c850bce450f259658005424e45  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
e522d84a324bc32ce3ba1cee5774ee95  bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbxm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bbxm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bone-debian-8.2-console-armhf-2015-09-11-2gb*
868ff8c2932d217525a63251ced2a4a2  bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap
e79c556c24300275cc0c4d51009eff85  bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bone-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb*
b4c803ffe5ca67d004c24934c5243c0c  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap
94f3d33c7643a3b10bce07854f1b4a4d  omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-09-11
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel
  • 2015-08-17
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-09-11/microsd/bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap

Verify Image with:

md5sum bbx15-debian-8.2-console-armhf-2015-09-11-2gb*
f736bb5a56778d596bca87d9cfc9c68a  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap
cc71854da5e67d262c2acd2acab1ef30  bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2015-09-11-2gb.bmap \
bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img.xz
sudo dd if=./bbx15-debian-8.2-console-armhf-2015-09-11-2gb.img of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x-ti or 4.1.x kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade