Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Xorg omapfb Drivers: these are broken after squeeze.... omapdrm will be available someday...)
m (2015-11-13)
(105 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
 
 
*armhf
 
** Port Details: http://wiki.debian.org/ArmHardFloatPort
 
** Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
 
= Help =
 
= Help =
Line 16: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.7.x Stable (3.7.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 27: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
Line 38: Line 36:
  
 
Scripts:
 
Scripts:
  git clone git://github.com/RobertCNelson/netinstall.git
+
  git clone https://github.com/RobertCNelson/netinstall.git
 
  cd netinstall
 
  cd netinstall
  
 
Device Options:
 
Device Options:
  BeagleBoard --uboot beagle_cx
+
  BeagleBoard --dtb omap3-beagle
  BeagleBoard xM --uboot beagle_xm
+
  BeagleBoard xM --dtb omap3-beagle-xm
  BeagleBone (serial) --uboot bone-serial
+
  BeagleBone (serial) --dtb am335x-bone-serial
  BeagleBone (video via cape) --uboot bone-video
+
  BeagleBone (video via cape) --dtb am335x-bone-video
 
  BeagleBone Black --dtb am335x-boneblack
 
  BeagleBone Black --dtb am335x-boneblack
  PandaBoard --uboot panda
+
  PandaBoard (A1->A3) --dtb omap4-panda
  PandaBoard ES  --uboot panda_es
+
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
  PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Wheezy ==
+
== Debian 8 (jessie) ==
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
 
*Options:
 
*Options:
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
 +
= Demo Image =
  
= Demo Image =
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.3.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.1.y -b tmp
 +
./build_kernel.sh
  
== Debian Wheezy snapshot ==
+
== Debian (jessie) ==
  
Default username/password:  
+
Default username/password:
 
*username: debian
 
*username: debian
 
*password: temppwd
 
*password: temppwd
 
Default root user/password
 
*user: root
 
*password: root
 
  
 
Image Updated:
 
Image Updated:
*2013-04-26
+
*2015-11-13
** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
+
** BeagleBoard xM: v4.3.0-armv7-x0 kernel
** BeagleBone: v3.2.42-psp27 kernel
+
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
** BeagleBone/BeagleBone Black: v3.8.8-bone14 kernel (--uboot bone_dtb)
+
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
*2013-03-28:
+
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
+
*2015-10-09
** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
+
** BeagleBoard xM: v4.2.3-armv7-x2 kernel
*2013-02-16:
+
** BeagleBone White/Black/Green: v4.1.10-ti-r21 kernel
** Beagle/Panda/Panda ES: v3.7.8-x8 kernel
+
** OMAP5432 uEVM: v4.1.10-ti-r21 kernel
** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8-rc7-bone4)
+
** BeagleBoard-X15: v4.1.10-ti-r21 kernel
 +
*2015-09-11
 +
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
  
 
Services Active:
 
Services Active:
  Note: Depending on your internal network these may work out the box
+
  Note: Depending on your internal network these may work out of the box
  Apache, Port 80: http://arm/
+
  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  SSH, Port 22: ssh ubuntu@arm
+
  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 
  Getty, Serial Port
 
  Getty, Serial Port
 +
 +
Default user: debian pass: temppwd
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-11-13/elinux/debian-8.2-console-armhf-2015-11-13.tar.xz
 +
 +
Verify Image with:
 +
md5sum debian-8.2-console-armhf-2015-11-13.tar.xz
 +
0867e2b28aa6354ff366fb7fa08bbba0  debian-8.2-console-armhf-2015-11-13.tar.xz
 +
 +
Unpack Image:
 +
tar xf debian-8.2-console-armhf-2015-11-13.tar.xz
 +
cd debian-8.2-console-armhf-2015-11-13
  
  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-console-armhf-2013-04-26.tar.xz
+
If you don't know the location of your SD card:
 +
  sudo ./setup_sdcard.sh --probe-mmc
  
Verify Image with:  
+
You should see something like:
md5sum debian-wheezy-console-armhf-2013-04-26.tar.xz
 
8a1c4ff53f3b2a42419ee1c7c1f47e40  debian-wheezy-console-armhf-2013-04-26.tar.xz
 
  
Unpack Image:
+
Are you sure? I don't see [/dev/idontknow], here is what I do see...
  tar xJf debian-wheezy-console-armhf-2013-04-26.tar.xz
+
  cd debian-wheezy-console-armhf-2013-04-26
+
fdisk -l:
 +
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
  └─sdd2  8:50  1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
 
Install Image:
 
Install Image:
  
Quick Install script for "board"
+
Quick install script for [board]
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2015.11 -b tmp
 +
 
 +
Stable:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
 +
 
 +
Testing:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 +
 
 +
== Debian Testing (stretch) ==
 +
 
 +
Image Updated:
 +
*2015-11-13
 +
** BeagleBoard xM: v4.3.0-armv7-x0 kernel
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
 +
*2015-10-09
 +
** BeagleBoard xM: v4.2.3-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.1.10-ti-r21 kernel
 +
** OMAP5432 uEVM: v4.1.10-ti-r21 kernel
 +
** BeagleBoard-X15: v4.1.10-ti-r21 kernel
 +
*2015-09-11
 +
** BeagleBoard xM: v4.2.0-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-11-13/elinux/debian-stretch-console-armhf-2015-11-13.tar.xz
  
"board" options:  
+
Verify Image with:
*BeagleBoard Ax/Bx    - beagle_bx
+
md5sum debian-stretch-console-armhf-2015-11-13.tar.xz
*BeagleBoard Cx/Dx    - beagle_cx
+
b7c1c01547eeaf4d5ac0076a9c1c3f8c  debian-stretch-console-armhf-2015-11-13.tar.xz
*BeagleBoard xM      - beagle_xm
 
*BeagleBone Ax        - bone
 
*BeagleBone/Black    - bone_dtb
 
*PandaBoard Ax        - panda
 
*PandaBoard ES        - panda_es
 
  
So For the BeagleBoard xM:
+
Unpack image:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
  tar xf debian-stretch-console-armhf-2015-11-13.tar.xz
 +
cd debian-stretch-console-armhf-2015-11-13
  
*Additional Options
+
Then follow the directions shown above with the other images...
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
= Debian Configuration =
+
= Flasher =
  
== Serial Ports ==
+
== eMMC: BeagleBone Black/Green ==
  
Lenny
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
edit /etc/inittab and add:
+
Script for reference: (this is the script that writes to the eMMC)
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
For root access over the serial port add ttyS2 to /etc/securetty
+
This script will only take about 5-6 Minutes after power on.
  
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
 +
User: debian
 +
pass: temppwd
  
Squeeze
+
Image Updated:
 +
*2015-11-13
 +
** BeagleBone Black/Green: v4.1.12-ti-r29 kernel
 +
*2015-10-09
 +
** BeagleBone Black/Green: v4.1.10-ti-r21 kernel
 +
*2015-09-11
 +
** BeagleBone Black/Green: v4.1.6-ti-r15 kernel
  
edit /etc/inittab and add:
+
Get prebuilt image:
  S:2345:respawn:/sbin/getty 115200 ttyO2
+
wget https://rcn-ee.com/rootfs/2015-11-13/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
 +
  wget https://rcn-ee.com/rootfs/2015-11-13/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap
  
== WiFi ==
+
Verify Image with:
 +
md5sum BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb*
 +
101d03b1d9e65468f8172b459171a70b  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap
 +
d0d8897ba301c2c958e2f86e7a3dbc95  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
 +
BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX
  
== SGX Video Acceleration ==
+
Linux: (dd)
 +
unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX
  
=== SGX armel/armhf v3.4.x+ ===
+
== eMMC: BeagleBoard-X15 ==
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
 
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
Script for reference: (this is the script that writes to the eMMC)
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
cd stable-kernel
 
git checkout origin/v3.7.x -b tmp
 
./build_kernel.sh (and then follow the directions as the script runs...)
 
  
Build kernel
+
This script will only take about 5-6 Minutes after power on.
./build_kernel.sh
 
  
Build SGX modules
+
Notes:
./sgx_build_modules.sh
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Insert SD card, make sure to modify MMC in system.sh
+
User: debian
./tools/install_image.sh
+
pass: temppwd
  
Place SD card into the device and boot...
+
Image Updated:
cd /opt/sgx
+
*2015-11-13
sudo tar xf GFX_4.0*_libs.tar.gz
+
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
sudo ./install-sgx.sh
+
*2015-10-09
 +
** BeagleBoard-X15: v4.1.10-ti-r21 kernel
 +
*2015-09-11
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
  
Reboot, check modules (lsmod):
+
Get prebuilt image:
  Module                  Size  Used by
+
  wget https://rcn-ee.com/rootfs/2015-11-13/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  bufferclass_ti          5727  0
+
  wget https://rcn-ee.com/rootfs/2015-11-13/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap
omaplfb                11512  0
 
pvrsrvkm              165208  2 bufferclass_ti,omaplfb
 
  
Blit Test:
+
Verify Image with:
ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
+
  md5sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb*
  ------------------ SGX 3D Blit test -----------------
+
  37c8ccfc3e7b4aad1a58bcbb4ca86597  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap
  ----------------------- Start -----------------------
+
  6138fce738d648f15f9e6dca97f8ab3b bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
Call PVRSRVConnect with a valid argument:
 
  OK
 
Get number of devices from PVRSRVEnumerateDevices:
 
  OK
 
.... Reported 1 devices
 
.... Device Number  | Device Type
 
            0000    | PVRSRV_DEVICE_ID_SGX
 
Attempt to acquire device 0:
 
  OK
 
Getting SGX Client info
 
  OK
 
.... ui32ProcessID:1133
 
  Display Class API: enumerate devices
 
  OK
 
  PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
  OK
 
Display Class API: open device
 
  OK
 
Display Class API: Get display info
 
  OK
 
.... Name:PowerVR OMAP Linux Display Driver
 
.... MaxSwapChains:1
 
.... MaxSwapChainBuffers:1
 
.... MinSwapInterval:0
 
.... MaxSwapInterval:1
 
Display Class API: enumerate display formats
 
  OK
 
  OK
 
.... Display format 0 - Pixelformat:1
 
Display Class API: enumerate display dimensions
 
  OK
 
  OK
 
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
Attempt to create memory context for SGX:
 
  OK
 
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
.... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
Display Class API: get the system (primary) buffer
 
  OK
 
Display Class API: map display surface to SGX
 
  OK
 
Attempt to create transfer context for SGX:
 
  OK
 
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
(bottom right quadrant should be red on blue background):
 
  OK
 
  OK
 
Do a SRCCOPY blit to the top left quadrant of the display:
 
(top left quadrant should be striped (r/g/b/w) on blue background):
 
  OK
 
  OK
 
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
(top right quadrant should be yellow):
 
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
  OK
 
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
and then present the RGB565 to the bottom right quadrant of the screen
 
(bottom right quadrant should be a red gradient):
 
  OK
 
  OK
 
  OK
 
  OK
 
Free the off screen surfaces:
 
  OK
 
  OK
 
  OK
 
  OK
 
Destroy the transfer context:
 
  OK
 
Display Class API: unmap display surface from SGX
 
  OK
 
Destroy Device Memory Context
 
Display Class API: close the device
 
  OK
 
Release SGX Client Info:
 
  OK
 
Disconnect from services:
 
  OK
 
------------------ SGX 3D Blit test -----------------
 
------------------------ End ------------------------
 
  
=== SGX Legacy armel only upto v3.2.x ===
+
Linux: (bmaptool 3.2)
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+
sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
 +
bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX
  
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Linux: (dd)
  https://github.com/RobertCNelson/stable-kernel
+
unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
 +
sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX
  
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
= raw microSD img =
https://github.com/RobertCNelson/stable-kernel/issues/8
 
oneiric:
 
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
 
/bin/bash install-me.sh
 
  
==== SDK unPackage Script ====
+
== BeagleBone White/Black/Green ==
  
Download the latest version of the "create_sgx_package.sh" script
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
2.6.37
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
 
2.6.38->3.2.x
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
 
  
Make script executable
+
User: debian
chmod a+x ./create_sgx_package_*.sh
+
pass: temppwd
  
Run script
+
Auto partition resize:
  ./create_sgx_package_*.sh
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
After Successfully running:
+
Image Updated:
 +
*2015-11-13
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
 +
*2015-10-09
 +
** BeagleBone White/Black/Green: v4.1.10-ti-r21 kernel
 +
*2015-09-11
 +
** BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
  
  :~/temp$ ls
+
Get prebuilt image:
create_sgx_package.sh
+
  wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bone-debian-8.2-console-armhf-2015-11-13-2gb.bmap
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
==== Beagle: GFX_*_libs.tar.gz ====
+
Verify Image with:
 +
md5sum bone-debian-8.2-console-armhf-2015-11-13-2gb*
 +
849bab845f8263171d5724d02b944dc6  bone-debian-8.2-console-armhf-2015-11-13-2gb.bmap
 +
30880b976f3c113aff2e3388a1f9f487  bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
Linux: (bmaptool 3.2)
  ./install-SGX.sh (copies necessary SGX libs and startup script)
+
  sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
  ./run-SGX.sh (force run the new init script, or you can just reboot...)
+
  bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX
  
On successful install:
+
Linux: (dd)
  Stopping PVR
+
  unxz bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  Starting PVR
+
  sudo dd if=./bone-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
== OMAP5432 uEVM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
Image Updated:
 +
*2015-11-13
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
 +
*2015-10-09
 +
** OMAP5432 uEVM: v4.1.10-ti-r21 kernel
 +
*2015-09-11
 +
** OMAP5432 uEVM: v4.1.6-ti-r15 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-11-13/microsd/omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-11-13/microsd/omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.bmap
  
  tar xf GFX_Linux_SDK.tar.gz
+
Verify Image with:
  cd GFX_Linux_SDK
+
  md5sum omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb*
  tar xf OGLES.tar.gz
+
2bc99efd4c0cb21e03d03adeb098fd6e  omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.bmap
 +
  72f60eb92919d444c020bfc70d9cd698 omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  
==== Test SGX with a DEMO ====
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
 +
omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Linux: (dd)
  ./OGLESEvilSkull
+
  unxz omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
 +
  sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX
  
==== Trouble Shooting ====
+
== BeagleBoard-X15 ==
  
sudo rm /etc/powervr-esrev
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
User: debian
 +
pass: temppwd
  
=== gst-dsp ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
The following Gstreamer elements will be installed:
+
Image Updated:
 +
*2015-11-13
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
 +
*2015-10-09
 +
** BeagleBoard-X15: v4.1.10-ti-r21 kernel
 +
*2015-09-11
 +
** BeagleBoard-X15: v4.1.6-ti-r15 kernel
  
  $ gst-inspect | grep dsp
+
Get prebuilt image:
  dvdspu: dvdspu: Sub-picture Overlay
+
  wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  dsp:  dspdummy: DSP dummy element
+
  wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bbx15-debian-8.2-console-armhf-2015-11-13-2gb.bmap
  dsp: dspvdec: DSP video decoder
 
  dsp:  dspadec: DSP audio decoder
 
  dsp:  dsph263enc: DSP video encoder
 
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
 
  dsp:  dspjpegenc: DSP video encoder
 
  dsp:  dsph264enc: DSP video encoder
 
  dsp:  dspvpp: DSP VPP filter
 
  dsp:  dspipp: DSP IPP
 
  
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
Verify Image with:
 +
md5sum bbx15-debian-8.2-console-armhf-2015-11-13-2gb*
 +
c61ac269c6bae72cc78939e26bd857a4  bbx15-debian-8.2-console-armhf-2015-11-13-2gb.bmap
 +
1c0e47dd1388f060ad29562a5e5682eb  bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
  
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
Linux: (bmaptool 3.2)
  ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+
sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
CONFIG_TIDSPBRIDGE=m
+
  bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX
CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
 
CONFIG_TIDSPBRIDGE_RECOVERY=y
 
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
# CONFIG_TIDSPBRIDGE_BACKTRACE is not set
 
  
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
Linux: (dd)
 +
unxz bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
 +
sudo dd if=./bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX
  
Download the latest version of the "create_dsp_package.sh" script
+
= Debian Configuration =
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
 
  
Make script executable
+
==Install Latest Kernel Image==
chmod a+x ./create_dsp_package.sh
 
  
Package script:
+
Script:
  ./create_dsp_package.sh
+
  cd /opt/scripts/tools
 +
git pull
  
Copy DSP_Install_libs.tar.gz to Beagle
+
Stable:
 +
./update_kernel.sh
  
Setup network...
+
Testing:
 +
./update_kernel.sh --beta-kernel
  
Extract:
+
Custom: (has to be on rcn-ee.net)
  ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
+
  ./update_kernel.sh --kernel v3.8.13-bone69
  
Install:
+
Reboot with your new Kernel Image.
ubuntu@arm:~$ ./install-DSP.sh
 
  
What got installed:
+
== Xorg Drivers ==
ubuntu@arm:~$ ls -lh /lib/dsp/
 
total 7.1M
 
-rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
 
-rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
 
-rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
 
-rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
 
-rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
 
-rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
 
-rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
 
-rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
 
-rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
 
-rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
 
-rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
 
-rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
 
  
Building gst-dsp stuff:
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Update arm tools directory to the latest:
+
BeagleBone/BeagleBone Black:
  ubuntu@arm:~$ cd /boot/uboot/tools/
+
  cd /opt/scripts/tools/graphics/
  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+
  ./ti-tilcdc.sh
  
Otherwise, install via git:
+
== SGX Drivers ==
git clone git://github.com/RobertCNelson/tools.git
 
  
Change to the pkgs directory
+
=== SGX BeagleBone/BeagleBone Black ===
ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
 
(or if just cloned)
 
ubuntu@arm:~$ cd ~/tools/pkgs
 
  
Build gst-dsp stuff..
+
Note, these are FBDEV only, no xorg/x11/etc...
./ti-tidspbridge.sh
 
  
Start dspbridge (or just reboot)
+
Install sgx modules (3.14.x-ti or 4.1.x kernel):
  sudo /etc/init.d/dsp_init start
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
 +
sudo depmod -a `uname -r`
 +
sudo update-initramfs -uk `uname -r`
  
Test dspbridge
+
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo dsp-test
+
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
  git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
./sgx_create_package.sh
  
Playbin:
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  sudo gst-launch playbin2 uri=file://(file)
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
  cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
  Note: it seems broken in Ubuntu precise armhf...
+
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
  sudo ./sgx-install.sh
 +
sudo reboot
  
  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
Verify omaplfb & pvrsrvkm loaded
 +
  debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
== Building Kernel ==
+
= Building Kernel =
  
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
 
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
=== Beagle/Beagle xM ===
+
== Beagle/Beagle xM ==
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
 
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
=== BeagleBone ===
+
== BeagleBone ==
 
  http://eewiki.net/display/linuxonarm/BeagleBone
 
  http://eewiki.net/display/linuxonarm/BeagleBone
  
=== Panda/Panda ES ===
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
 +
 
 +
== Panda/Panda ES ==
 
  http://eewiki.net/display/linuxonarm/PandaBoard
 
  http://eewiki.net/display/linuxonarm/PandaBoard
  

Revision as of 09:28, 16 November 2015

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.3.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.1.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2015-11-13
    • BeagleBoard xM: v4.3.0-armv7-x0 kernel
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel
  • 2015-10-09
    • BeagleBoard xM: v4.2.3-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.1.10-ti-r21 kernel
    • OMAP5432 uEVM: v4.1.10-ti-r21 kernel
    • BeagleBoard-X15: v4.1.10-ti-r21 kernel
  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-11-13/elinux/debian-8.2-console-armhf-2015-11-13.tar.xz

Verify Image with:

md5sum debian-8.2-console-armhf-2015-11-13.tar.xz
0867e2b28aa6354ff366fb7fa08bbba0  debian-8.2-console-armhf-2015-11-13.tar.xz

Unpack Image:

tar xf debian-8.2-console-armhf-2015-11-13.tar.xz
cd debian-8.2-console-armhf-2015-11-13

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.11 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2015-11-13
    • BeagleBoard xM: v4.3.0-armv7-x0 kernel
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel
  • 2015-10-09
    • BeagleBoard xM: v4.2.3-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.1.10-ti-r21 kernel
    • OMAP5432 uEVM: v4.1.10-ti-r21 kernel
    • BeagleBoard-X15: v4.1.10-ti-r21 kernel
  • 2015-09-11
    • BeagleBoard xM: v4.2.0-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-11-13/elinux/debian-stretch-console-armhf-2015-11-13.tar.xz

Verify Image with:

md5sum debian-stretch-console-armhf-2015-11-13.tar.xz
b7c1c01547eeaf4d5ac0076a9c1c3f8c  debian-stretch-console-armhf-2015-11-13.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2015-11-13.tar.xz
cd debian-stretch-console-armhf-2015-11-13

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-11-13
    • BeagleBone Black/Green: v4.1.12-ti-r29 kernel
  • 2015-10-09
    • BeagleBone Black/Green: v4.1.10-ti-r21 kernel
  • 2015-09-11
    • BeagleBone Black/Green: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-11-13/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-11-13/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap

Verify Image with:

md5sum BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb*
101d03b1d9e65468f8172b459171a70b  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap
d0d8897ba301c2c958e2f86e7a3dbc95  BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2015-11-13
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel
  • 2015-10-09
    • BeagleBoard-X15: v4.1.10-ti-r21 kernel
  • 2015-09-11
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-11-13/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-11-13/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap

Verify Image with:

md5sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb*
37c8ccfc3e7b4aad1a58bcbb4ca86597  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap
6138fce738d648f15f9e6dca97f8ab3b  bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX

raw microSD img

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-11-13
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
  • 2015-10-09
    • BeagleBone White/Black/Green: v4.1.10-ti-r21 kernel
  • 2015-09-11
    • BeagleBone White/Black/Green: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bone-debian-8.2-console-armhf-2015-11-13-2gb.bmap

Verify Image with:

md5sum bone-debian-8.2-console-armhf-2015-11-13-2gb*
849bab845f8263171d5724d02b944dc6  bone-debian-8.2-console-armhf-2015-11-13-2gb.bmap
30880b976f3c113aff2e3388a1f9f487  bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
sudo dd if=./bone-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-11-13
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel
  • 2015-10-09
    • OMAP5432 uEVM: v4.1.10-ti-r21 kernel
  • 2015-09-11
    • OMAP5432 uEVM: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-11-13/microsd/omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-11-13/microsd/omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.bmap

Verify Image with:

md5sum omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb*
2bc99efd4c0cb21e03d03adeb098fd6e  omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.bmap
72f60eb92919d444c020bfc70d9cd698  omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-11-13
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel
  • 2015-10-09
    • BeagleBoard-X15: v4.1.10-ti-r21 kernel
  • 2015-09-11
    • BeagleBoard-X15: v4.1.6-ti-r15 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-11-13/microsd/bbx15-debian-8.2-console-armhf-2015-11-13-2gb.bmap

Verify Image with:

md5sum bbx15-debian-8.2-console-armhf-2015-11-13-2gb*
c61ac269c6bae72cc78939e26bd857a4  bbx15-debian-8.2-console-armhf-2015-11-13-2gb.bmap
1c0e47dd1388f060ad29562a5e5682eb  bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2015-11-13-2gb.bmap \
bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img.xz
sudo dd if=./bbx15-debian-8.2-console-armhf-2015-11-13-2gb.img of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x-ti or 4.1.x kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade