Difference between revisions of "BeagleBoardDebian"
m (→Install complete) |
m (2016-01-14) |
||
(358 intermediate revisions by 22 users not shown) | |||
Line 1: | Line 1: | ||
[[Category: Linux]] | [[Category: Linux]] | ||
[[Category: OMAP]] | [[Category: OMAP]] | ||
− | This page is about running a (ARM | + | [[Category:Development Boards]] |
+ | [[Category: BeagleBoard]] | ||
+ | This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle. | ||
− | + | = Help = | |
− | + | If you need any help: | |
− | |||
− | + | *Kernel related help: | |
+ | ** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method | ||
+ | ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ||
+ | ** Kernel Trees | ||
+ | *** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch] | ||
+ | *** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone] | ||
+ | *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | ||
− | + | *When asking for help, please provide some debugging information: | |
+ | ** U-Boot Version installed on board | ||
+ | ** Kernel Version: uname -a | ||
+ | ** pastebin dmesg | ||
+ | *** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit) | ||
− | + | = Official BeagleBoard.org Images for shipping with BeagleBone Black = | |
+ | * http://beagleboard.org/source | ||
− | + | = Recommended Beagle Software = | |
− | + | Mainline U-Boot: | |
+ | * All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions. | ||
+ | * XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition | ||
+ | * Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot] | ||
− | = | + | = Debian NetInstall = |
− | |||
− | + | Scripts: | |
+ | git clone https://github.com/RobertCNelson/netinstall.git | ||
+ | cd netinstall | ||
− | + | Device Options: | |
+ | BeagleBoard --dtb omap3-beagle | ||
+ | BeagleBoard xM --dtb omap3-beagle-xm | ||
+ | BeagleBone (serial) --dtb am335x-bone-serial | ||
+ | BeagleBone (video via cape) --dtb am335x-bone-video | ||
+ | BeagleBone Black --dtb am335x-boneblack | ||
+ | PandaBoard (A1->A3) --dtb omap4-panda | ||
+ | PandaBoard (A4->Ax) --dtb omap4-panda-a4 | ||
+ | PandaBoard ES --dtb omap4-panda-es | ||
You will need a 1GB SD card or greater. | You will need a 1GB SD card or greater. | ||
Standard System : ~455MB | Standard System : ~455MB | ||
− | |||
− | + | == Debian 8 (jessie) == | |
− | |||
− | |||
− | + | Quick Install script for "board" | |
+ | sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie | ||
− | + | So For the BeagleBoard xM: | |
+ | sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie | ||
− | + | *Options: | |
− | + | **--firmware : installs firmware | |
− | + | **--serial-mode : debian-installer uses Serial Port | |
− | |||
− | |||
− | |||
− | |||
− | + | = Demo Image = | |
− | + | * '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform | |
− | + | git clone https://github.com/RobertCNelson/armv7-multiplatform.git | |
− | + | cd armv7-multiplatform | |
− | + | git checkout origin/v4.4.x -b tmp | |
− | + | ./build_kernel.sh | |
− | + | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y | |
− | + | git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git | |
− | + | cd ti-linux-kernel-dev | |
+ | git checkout origin/ti-linux-rt-4.1.y -b tmp | ||
+ | ./build_kernel.sh | ||
− | + | == Debian (jessie) == | |
− | |||
− | + | Default username/password: | |
− | + | *username: debian | |
+ | *password: temppwd | ||
− | + | Image Updated: | |
+ | *2016-01-14 | ||
+ | ** BeagleBoard xM: v4.4.0-armv7-x3 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel | ||
+ | ** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel | ||
+ | *2015-12-11 | ||
+ | ** BeagleBoard xM: v4.3.2-armv7-x1 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.13-ti-r36 kernel | ||
+ | ** BeagleBoard-X15: v4.1.13-ti-r36 kernel | ||
+ | *2015-11-13 | ||
+ | ** BeagleBoard xM: v4.3.0-armv7-x0 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.12-ti-r29 kernel | ||
+ | ** BeagleBoard-X15: v4.1.12-ti-r29 kernel | ||
− | + | Services Active: | |
− | + | Note: Depending on your internal network these may work out of the box | |
− | + | Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 | |
− | + | SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2 | |
− | + | Getty, Serial Port | |
− | |||
− | + | Default user: debian pass: temppwd | |
− | |||
− | |||
− | |||
− | |||
− | + | Get prebuilt image: | |
− | + | wget https://rcn-ee.com/rootfs/2016-01-14/elinux/debian-8.2-console-armhf-2016-01-14.tar.xz | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | Verify Image with: | |
+ | sha256sum debian-8.2-console-armhf-2016-01-14.tar.xz | ||
+ | 8968f1755bf9474738df7b9f5da42c5dc518cce3dbb954761848c13ee0152ef5 debian-8.2-console-armhf-2016-01-14.tar.xz | ||
− | + | Unpack Image: | |
− | + | tar xf debian-8.2-console-armhf-2016-01-14.tar.xz | |
− | + | cd debian-8.2-console-armhf-2016-01-14 | |
− | + | If you don't know the location of your SD card: | |
+ | sudo ./setup_sdcard.sh --probe-mmc | ||
− | + | You should see something like: | |
− | + | Are you sure? I don't see [/dev/idontknow], here is what I do see... | |
+ | |||
+ | fdisk -l: | ||
+ | Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive''' | ||
+ | Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card''' | ||
+ | |||
+ | lsblk: | ||
+ | NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT | ||
+ | sda 8:0 0 465.8G 0 disk | ||
+ | ├─sda1 8:1 0 446.9G 0 part / '''<- x86 Root Partition''' | ||
+ | ├─sda2 8:2 0 1K 0 part | ||
+ | └─sda5 8:5 0 18.9G 0 part [SWAP] | ||
+ | sdd 8:48 1 3.7G 0 disk | ||
+ | ├─sdd1 8:49 1 64M 0 part | ||
+ | └─sdd2 8:50 1 3.6G 0 part | ||
− | + | * In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh... | |
− | |||
− | |||
− | + | Install Image: | |
− | + | Quick install script for [board] | |
+ | sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board | ||
− | + | board options: | |
+ | *BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle | ||
+ | *BeagleBoard xM - omap3-beagle-xm | ||
+ | *BeagleBone White/Black/Green - beaglebone | ||
+ | *OMAP5432 uEVM - omap5-uevm | ||
+ | *BeagleBoard-X15 - am57xx-beagle-x15 | ||
− | + | So for the BeagleBoard xM: | |
− | + | sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm | |
− | + | Advanced: Build Image: | |
− | + | git clone https://github.com/RobertCNelson/omap-image-builder.git | |
− | + | cd omap-image-builder | |
− | + | git checkout v2016.01 -b tmp | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | Stable: | |
− | |||
− | |||
− | |||
− | |||
− | + | ./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf | |
− | |||
− | |||
− | |||
− | |||
− | + | Testing: | |
− | |||
− | |||
− | |||
− | |||
− | + | ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf | |
− | == | + | == Debian Testing (stretch) == |
− | + | Image Updated: | |
− | + | *2016-01-14 | |
− | + | ** archive broken: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810785 | |
− | + | *2015-12-11 | |
+ | ** BeagleBoard xM: v4.3.2-armv7-x1 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.13-ti-r36 kernel | ||
+ | ** BeagleBoard-X15: v4.1.13-ti-r36 kernel | ||
+ | *2015-11-13 | ||
+ | ** BeagleBoard xM: v4.3.0-armv7-x0 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.12-ti-r29 kernel | ||
+ | ** BeagleBoard-X15: v4.1.12-ti-r29 kernel | ||
− | + | Get prebuilt image: | |
− | + | wget https://rcn-ee.com/rootfs/2015-12-11/elinux/debian-stretch-console-armhf-2015-12-11.tar.xz | |
− | + | Verify Image with: | |
− | + | sha256sum debian-stretch-console-armhf-2015-12-11.tar.xz | |
+ | 1a87d83e4238b52b10d616a345a5ce4e3bc04dbb86590e981f6ae5e45e55b7ba debian-stretch-console-armhf-2015-12-11.tar.xz | ||
− | + | Unpack image: | |
− | + | tar xf debian-stretch-console-armhf-2015-12-11.tar.xz | |
+ | cd debian-stretch-console-armhf-2015-12-11 | ||
− | + | Then follow the directions shown above with the other images... | |
− | |||
− | + | = Flasher = | |
− | = | + | == eMMC: BeagleBone Black/Green == |
− | This | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. |
− | |||
− | |||
− | |||
− | + | Script for reference: (this is the script that writes to the eMMC) | |
+ | https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh | ||
− | + | This script will only take about 5-6 Minutes after power on. | |
− | |||
− | |||
− | |||
− | + | Notes: | |
− | + | * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected. | |
− | + | * If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again. | |
− | + | User: debian | |
+ | pass: temppwd | ||
− | + | Image Updated: | |
+ | *2016-01-14 | ||
+ | ** BeagleBone Black/Green: v4.1.15-ti-rt-r40 kernel | ||
+ | *2015-12-11 | ||
+ | ** BeagleBone Black/Green: v4.1.13-ti-r36 kernel | ||
+ | *2015-11-13 | ||
+ | ** BeagleBone Black/Green: v4.1.12-ti-r29 kernel | ||
− | + | Get prebuilt image: | |
− | + | wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | |
− | wget | + | wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap |
− | wget | ||
− | + | Verify Image with: | |
+ | sha256sum BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb* | ||
+ | 9e880b7b5614b6d1d9414cc036d292d7e1bd6680f3a7c3792fb6a21a63f93be6 BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap | ||
+ | f68df6578f1e38aaab298d61a8f5f400286c325af53387b1146aedcaf8afcf00 BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
− | + | Linux: (bmaptool 3.2) | |
+ | sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ | ||
+ | BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX | ||
− | + | Linux: (dd) | |
+ | unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX | ||
− | + | == eMMC: BeagleBoard-X15 == | |
− | |||
− | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | |
− | + | Script for reference: (this is the script that writes to the eMMC) | |
+ | https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh | ||
− | + | This script will only take about 5-6 Minutes after power on. | |
− | |||
− | |||
− | + | Notes: | |
+ | * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected. | ||
+ | * If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again. | ||
− | + | User: debian | |
+ | pass: temppwd | ||
− | + | Image Updated: | |
− | + | *2016-01-14 | |
+ | ** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel | ||
+ | *2015-12-11 | ||
+ | ** BeagleBoard-X15: v4.1.13-ti-r36 kernel | ||
+ | *2015-11-13 | ||
+ | ** BeagleBoard-X15: v4.1.12-ti-r29 kernel | ||
− | + | Get prebuilt image: | |
+ | wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap | ||
− | + | Verify Image with: | |
− | + | sha256sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb* | |
− | + | 74b5b685869a472d0a0c86d0bfd050b3cd8c5f169c6b08781a05c6c8a6762879 bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap | |
+ | c1e660bacc5a29f2e550be1226907faca40c7a5124d100d875b6f262bc7261ca bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
− | + | Linux: (bmaptool 3.2) | |
+ | sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ | ||
+ | bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX | ||
− | + | Linux: (dd) | |
+ | unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX | ||
− | + | = raw microSD img = | |
− | |||
− | + | == BeagleBone White/Black/Green == | |
− | |||
− | |||
− | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager | |
− | |||
− | |||
− | + | User: debian | |
− | + | pass: temppwd | |
− | + | Auto partition resize: | |
− | + | cd /opt/scripts/tools | |
+ | git pull | ||
+ | ./grow_partition.sh | ||
+ | sudo reboot | ||
− | + | Image Updated: | |
− | + | *2016-01-14 | |
+ | ** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel | ||
+ | *2015-12-11 | ||
+ | ** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel | ||
+ | *2015-11-13 | ||
+ | ** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel | ||
− | + | Get prebuilt image: | |
+ | wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap | ||
− | + | Verify Image with: | |
+ | sha256sum bone-debian-8.2-console-armhf-2016-01-14-2gb* | ||
+ | 8fc766ce8e7b561517b1fbc18353e477368ab7c28e5ab2ffb90a15bb034220dd bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap | ||
+ | 96f74695382e18e8c5cba1b3ee2ddca220a2a192d5ccd6d29a8e944b843ae4de bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
− | + | Linux: (bmaptool 3.2) | |
+ | sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ | ||
+ | bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX | ||
− | == | + | Linux: (dd) |
+ | unxz bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | sudo dd if=./bone-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX | ||
− | + | == OMAP5432 uEVM == | |
− | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager | |
− | |||
− | |||
− | |||
− | |||
− | + | User: debian | |
− | + | pass: temppwd | |
− | |||
− | |||
− | + | Auto partition resize: | |
− | + | cd /opt/scripts/tools | |
− | + | git pull | |
− | + | ./grow_partition.sh | |
− | + | sudo reboot | |
− | + | Image Updated: | |
− | + | *2016-01-14 | |
− | + | ** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel | |
− | + | *2015-12-11 | |
− | + | ** OMAP5432 uEVM: v4.1.13-ti-r36 kernel | |
+ | *2015-11-13 | ||
+ | ** OMAP5432 uEVM: v4.1.12-ti-r29 kernel | ||
− | + | Get prebuilt image: | |
− | + | wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | |
− | + | wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap | |
− | |||
− | + | Verify Image with: | |
+ | sha256sum omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb* | ||
+ | fba8580490fac9d2d8e0ae57e24bc422e12e9e7bcc1c339180d28559523efa70 omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap | ||
+ | 86449a8137c76517076b00a83f01f1d6982c3a830baec7359f4cbabee3c0af4e omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
− | + | Linux: (bmaptool 3.2) | |
+ | sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ | ||
+ | omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX | ||
− | + | Linux: (dd) | |
+ | unxz omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX | ||
− | + | == BeagleBoard-X15 == | |
− | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager | |
− | |||
− | |||
− | + | User: debian | |
+ | pass: temppwd | ||
− | + | Auto partition resize: | |
− | + | cd /opt/scripts/tools | |
− | + | git pull | |
− | + | ./grow_partition.sh | |
− | + | sudo reboot | |
− | |||
− | |||
− | |||
− | + | Image Updated: | |
+ | *2016-01-14 | ||
+ | ** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel | ||
+ | *2015-12-11 | ||
+ | ** BeagleBoard-X15: v4.1.13-ti-r36 kernel | ||
+ | *2015-11-13 | ||
+ | ** BeagleBoard-X15: v4.1.12-ti-r29 kernel | ||
− | + | Get prebuilt image: | |
+ | wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap | ||
− | * | + | Verify Image with: |
− | + | sha256sum bbx15-debian-8.2-console-armhf-2016-01-14-2gb* | |
+ | 74ad41cbd92df34fc3a70e48d9adfeedbd98fcbaf2ff4cdc5b0a82615d924ad6 bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap | ||
+ | 331dbf5499151122c4bd08d0cb0b62bb115490d49ef120b4f1a6ff0d15430cb9 bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
− | + | Linux: (bmaptool 3.2) | |
− | + | sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ | |
+ | bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX | ||
− | + | Linux: (dd) | |
+ | unxz bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz | ||
+ | sudo dd if=./bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX | ||
− | + | = Debian Configuration = | |
− | == | + | ==Install Latest Kernel Image== |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | General apt syntax for searching and installing a specific kernel: | |
+ | sudo apt-get update | ||
+ | sudo apt-cache search linux-image | grep <branch> | ||
+ | sudo apt-get install linux-image-<specific version> | ||
+ | sudo reboot | ||
− | + | Latest kernel script | |
− | + | cd /opt/scripts/tools/ | |
− | + | git pull | |
+ | sudo ./update_kernel.sh <OPTIONS> | ||
− | = | + | == 3.8.x == |
+ | This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy | ||
+ | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8 | ||
− | + | 3.8.x BeagleBone/BeagleBone Black FULL Cape Support | |
+ | --bone-channel --stable | ||
− | + | 3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai | |
− | + | --bone-xenomai-channel --stable | |
− | |||
− | == | + | == 4.1.x-ti == |
+ | This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled. | ||
+ | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1 | ||
+ | Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y | ||
− | + | 4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 | |
− | + | --ti-channel --stable | |
− | |||
− | + | 4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT | |
− | + | --ti-rt-channel --stable | |
− | + | == Mainline (lts) == | |
− | |||
− | + | 4.1.x BeagleBone/BeagleBone Black + SGX | |
− | + | --bone-kernel --lts | |
− | |||
− | |||
− | + | 4.1.x BeagleBone/BeagleBone Black + RT + SGX | |
− | + | --bone-rt-kernel --lts | |
− | |||
− | + | == Mainline == | |
− | + | 4.3.x BeagleBone/BeagleBone Black | |
+ | --bone-kernel --testing | ||
− | = | + | == Debian 8: jessie == |
+ | sudo apt-get install linux-image-armmp | ||
− | + | Reboot with your new Kernel Image. | |
− | + | == Xorg Drivers == | |
− | |||
− | + | Script: | |
+ | cd /opt/scripts/tools/ | ||
+ | git pull | ||
− | + | BeagleBoard/PandaBoard: | |
+ | cd /opt/scripts/tools/graphics/ | ||
+ | ./ti-omapdrm.sh | ||
− | + | BeagleBone/BeagleBone Black: | |
+ | cd /opt/scripts/tools/graphics/ | ||
+ | ./ti-tilcdc.sh | ||
− | + | == SGX Drivers == | |
− | + | === SGX BeagleBone/BeagleBone Black === | |
− | |||
− | + | Note, these are FBDEV only, no xorg/x11/etc... | |
− | + | Install the "4.1.x" lts/bone kernel: | |
+ | http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29 | ||
− | + | Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor) | |
+ | git clone https://github.com/RobertCNelson/bb-kernel.git | ||
+ | cd bb-kernel/ | ||
+ | git checkout origin/am33x-v4.1 -b tmp-sgx | ||
+ | ./sgx_create_package.sh | ||
− | + | Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install | |
+ | sudo tar xfv GFX_5.01.01.02.tar.gz -C / | ||
+ | cd /opt/gfxinstall/ | ||
+ | sudo ./sgx-install.sh | ||
+ | sudo reboot | ||
− | + | Verify omaplfb & pvrsrvkm loaded | |
− | + | debian@arm:~$ lsmod | grep omaplfb | |
− | + | omaplfb 12065 0 | |
− | + | pvrsrvkm 178782 1 omaplfb | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | = | + | = Building Kernel = |
− | + | Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages: | |
− | + | == Beagle/Beagle xM == | |
+ | http://eewiki.net/display/linuxonarm/BeagleBoard | ||
− | + | == BeagleBone == | |
− | + | http://eewiki.net/display/linuxonarm/BeagleBone | |
− | == | + | == BeagleBone Black == |
+ | http://eewiki.net/display/linuxonarm/BeagleBone+Black | ||
− | + | == Panda/Panda ES == | |
− | + | http://eewiki.net/display/linuxonarm/PandaBoard | |
− | |||
− | + | = Upgrading from Debian 5 to Debian 6 = | |
− | |||
− | + | [http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial. | |
− | |||
− | + | = Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) = | |
− | |||
− | + | Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install... | |
− | |||
− | + | sudo apt-get update ; sudo apt-get upgrade | |
− | + | sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list | |
− | + | sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg | |
+ | sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade |
Revision as of 22:04, 15 January 2016
This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.
Contents
- 1 Help
- 2 Official BeagleBoard.org Images for shipping with BeagleBone Black
- 3 Recommended Beagle Software
- 4 Debian NetInstall
- 5 Demo Image
- 6 Flasher
- 7 raw microSD img
- 8 Debian Configuration
- 9 Building Kernel
- 10 Upgrading from Debian 5 to Debian 6
- 11 Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Help
If you need any help:
- Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees
- When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
- Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
Official BeagleBoard.org Images for shipping with BeagleBone Black
Recommended Beagle Software
Mainline U-Boot:
- All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
- XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
- Directions: Upgrade X-loader and U-Boot
Debian NetInstall
Scripts:
git clone https://github.com/RobertCNelson/netinstall.git cd netinstall
Device Options:
BeagleBoard --dtb omap3-beagle BeagleBoard xM --dtb omap3-beagle-xm BeagleBone (serial) --dtb am335x-bone-serial BeagleBone (video via cape) --dtb am335x-bone-video BeagleBone Black --dtb am335x-boneblack PandaBoard (A1->A3) --dtb omap4-panda PandaBoard (A4->Ax) --dtb omap4-panda-a4 PandaBoard ES --dtb omap4-panda-es
You will need a 1GB SD card or greater.
Standard System : ~455MB
Debian 8 (jessie)
Quick Install script for "board"
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
So For the BeagleBoard xM:
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
- Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port
Demo Image
- Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
git clone https://github.com/RobertCNelson/armv7-multiplatform.git cd armv7-multiplatform git checkout origin/v4.4.x -b tmp ./build_kernel.sh
- Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git cd ti-linux-kernel-dev git checkout origin/ti-linux-rt-4.1.y -b tmp ./build_kernel.sh
Debian (jessie)
Default username/password:
- username: debian
- password: temppwd
Image Updated:
- 2016-01-14
- BeagleBoard xM: v4.4.0-armv7-x3 kernel
- BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
- OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
- BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
- 2015-12-11
- BeagleBoard xM: v4.3.2-armv7-x1 kernel
- BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
- OMAP5432 uEVM: v4.1.13-ti-r36 kernel
- BeagleBoard-X15: v4.1.13-ti-r36 kernel
- 2015-11-13
- BeagleBoard xM: v4.3.0-armv7-x0 kernel
- BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
- OMAP5432 uEVM: v4.1.12-ti-r29 kernel
- BeagleBoard-X15: v4.1.12-ti-r29 kernel
Services Active:
Note: Depending on your internal network these may work out of the box Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2 Getty, Serial Port
Default user: debian pass: temppwd
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-01-14/elinux/debian-8.2-console-armhf-2016-01-14.tar.xz
Verify Image with:
sha256sum debian-8.2-console-armhf-2016-01-14.tar.xz 8968f1755bf9474738df7b9f5da42c5dc518cce3dbb954761848c13ee0152ef5 debian-8.2-console-armhf-2016-01-14.tar.xz
Unpack Image:
tar xf debian-8.2-console-armhf-2016-01-14.tar.xz cd debian-8.2-console-armhf-2016-01-14
If you don't know the location of your SD card:
sudo ./setup_sdcard.sh --probe-mmc
You should see something like:
Are you sure? I don't see [/dev/idontknow], here is what I do see... fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card lsblk: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 446.9G 0 part / <- x86 Root Partition ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 18.9G 0 part [SWAP] sdd 8:48 1 3.7G 0 disk ├─sdd1 8:49 1 64M 0 part └─sdd2 8:50 1 3.6G 0 part
- In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
Install Image:
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
board options:
- BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
- BeagleBoard xM - omap3-beagle-xm
- BeagleBone White/Black/Green - beaglebone
- OMAP5432 uEVM - omap5-uevm
- BeagleBoard-X15 - am57xx-beagle-x15
So for the BeagleBoard xM:
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Advanced: Build Image:
git clone https://github.com/RobertCNelson/omap-image-builder.git cd omap-image-builder git checkout v2016.01 -b tmp
Stable:
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
Testing:
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
Debian Testing (stretch)
Image Updated:
- 2016-01-14
- archive broken: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810785
- 2015-12-11
- BeagleBoard xM: v4.3.2-armv7-x1 kernel
- BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
- OMAP5432 uEVM: v4.1.13-ti-r36 kernel
- BeagleBoard-X15: v4.1.13-ti-r36 kernel
- 2015-11-13
- BeagleBoard xM: v4.3.0-armv7-x0 kernel
- BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
- OMAP5432 uEVM: v4.1.12-ti-r29 kernel
- BeagleBoard-X15: v4.1.12-ti-r29 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-12-11/elinux/debian-stretch-console-armhf-2015-12-11.tar.xz
Verify Image with:
sha256sum debian-stretch-console-armhf-2015-12-11.tar.xz 1a87d83e4238b52b10d616a345a5ce4e3bc04dbb86590e981f6ae5e45e55b7ba debian-stretch-console-armhf-2015-12-11.tar.xz
Unpack image:
tar xf debian-stretch-console-armhf-2015-12-11.tar.xz cd debian-stretch-console-armhf-2015-12-11
Then follow the directions shown above with the other images...
Flasher
eMMC: BeagleBone Black/Green
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2016-01-14
- BeagleBone Black/Green: v4.1.15-ti-rt-r40 kernel
- 2015-12-11
- BeagleBone Black/Green: v4.1.13-ti-r36 kernel
- 2015-11-13
- BeagleBone Black/Green: v4.1.12-ti-r29 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
Verify Image with:
sha256sum BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb* 9e880b7b5614b6d1d9414cc036d292d7e1bd6680f3a7c3792fb6a21a63f93be6 BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap f68df6578f1e38aaab298d61a8f5f400286c325af53387b1146aedcaf8afcf00 BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
Linux: (dd)
unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
eMMC: BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2016-01-14
- BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
- 2015-12-11
- BeagleBoard-X15: v4.1.13-ti-r36 kernel
- 2015-11-13
- BeagleBoard-X15: v4.1.12-ti-r29 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
Verify Image with:
sha256sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb* 74b5b685869a472d0a0c86d0bfd050b3cd8c5f169c6b08781a05c6c8a6762879 bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap c1e660bacc5a29f2e550be1226907faca40c7a5124d100d875b6f262bc7261ca bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
Linux: (dd)
unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
raw microSD img
BeagleBone White/Black/Green
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2016-01-14
- BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
- 2015-12-11
- BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
- 2015-11-13
- BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap
Verify Image with:
sha256sum bone-debian-8.2-console-armhf-2016-01-14-2gb* 8fc766ce8e7b561517b1fbc18353e477368ab7c28e5ab2ffb90a15bb034220dd bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap 96f74695382e18e8c5cba1b3ee2ddca220a2a192d5ccd6d29a8e944b843ae4de bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
Linux: (dd)
unxz bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz sudo dd if=./bone-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
OMAP5432 uEVM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2016-01-14
- OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
- 2015-12-11
- OMAP5432 uEVM: v4.1.13-ti-r36 kernel
- 2015-11-13
- OMAP5432 uEVM: v4.1.12-ti-r29 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap
Verify Image with:
sha256sum omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb* fba8580490fac9d2d8e0ae57e24bc422e12e9e7bcc1c339180d28559523efa70 omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap 86449a8137c76517076b00a83f01f1d6982c3a830baec7359f4cbabee3c0af4e omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
Linux: (dd)
unxz omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2016-01-14
- BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
- 2015-12-11
- BeagleBoard-X15: v4.1.13-ti-r36 kernel
- 2015-11-13
- BeagleBoard-X15: v4.1.12-ti-r29 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap
Verify Image with:
sha256sum bbx15-debian-8.2-console-armhf-2016-01-14-2gb* 74ad41cbd92df34fc3a70e48d9adfeedbd98fcbaf2ff4cdc5b0a82615d924ad6 bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap 331dbf5499151122c4bd08d0cb0b62bb115490d49ef120b4f1a6ff0d15430cb9 bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap \ bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
Linux: (dd)
unxz bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz sudo dd if=./bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
Debian Configuration
Install Latest Kernel Image
General apt syntax for searching and installing a specific kernel:
sudo apt-get update sudo apt-cache search linux-image | grep <branch> sudo apt-get install linux-image-<specific version> sudo reboot
Latest kernel script
cd /opt/scripts/tools/ git pull sudo ./update_kernel.sh <OPTIONS>
3.8.x
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support --bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai --bone-xenomai-channel --stable
4.1.x-ti
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1 Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 --ti-channel --stable
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT --ti-rt-channel --stable
Mainline (lts)
4.1.x BeagleBone/BeagleBone Black + SGX --bone-kernel --lts
4.1.x BeagleBone/BeagleBone Black + RT + SGX --bone-rt-kernel --lts
Mainline
4.3.x BeagleBone/BeagleBone Black --bone-kernel --testing
Debian 8: jessie
sudo apt-get install linux-image-armmp
Reboot with your new Kernel Image.
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
SGX Drivers
SGX BeagleBone/BeagleBone Black
Note, these are FBDEV only, no xorg/x11/etc...
Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v4.1 -b tmp-sgx ./sgx_create_package.sh
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
sudo tar xfv GFX_5.01.01.02.tar.gz -C / cd /opt/gfxinstall/ sudo ./sgx-install.sh sudo reboot
Verify omaplfb & pvrsrvkm loaded
debian@arm:~$ lsmod | grep omaplfb omaplfb 12065 0 pvrsrvkm 178782 1 omaplfb
Building Kernel
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
Beagle/Beagle xM
http://eewiki.net/display/linuxonarm/BeagleBoard
BeagleBone
http://eewiki.net/display/linuxonarm/BeagleBone
BeagleBone Black
http://eewiki.net/display/linuxonarm/BeagleBone+Black
Panda/Panda ES
http://eewiki.net/display/linuxonarm/PandaBoard
Upgrading from Debian 5 to Debian 6
Upgrading from Debian 5 to Debian 6 report and tutorial.
Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
sudo apt-get update ; sudo apt-get upgrade sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade