Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Change Ubuntu Link)
m (2016-01-14)
(481 intermediate revisions by 28 users not shown)
Line 1: Line 1:
 
[[Category: Linux]]
 
[[Category: Linux]]
 
[[Category: OMAP]]
 
[[Category: OMAP]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
[[Category:Development Boards]]
 +
[[Category: BeagleBoard]]
 +
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.  For a more optimized and faster system checkout: [http://mojo.handhelds.org/ Mojo Project] (armv5el & armv6el-vfp editions).  The OMAP3530 on the Beagle Board is armv7-a. See [[BeagleBoardHandheldsMojo|Handhelds Mojo (ARM) at BeagleBoard]] (formerly known as Ubuntu (ARM)) page, too.
+
= Help =
  
= QEMU =
+
If you need any help:
  
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
+
*Kernel related help:
apt-get install qemu
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
+
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 +
** Kernel Trees
 +
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
==Format SD Card==
+
*When asking for help, please provide some debugging information:
 +
** U-Boot Version installed on board
 +
** Kernel Version: uname -a
 +
** pastebin dmesg
 +
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
 +
 
 +
= Recommended Beagle Software =  
 +
 
 +
Mainline U-Boot:
 +
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 +
 
 +
= Debian NetInstall =
 +
 
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard xM --dtb omap3-beagle-xm
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
Currently (Aug 15, 2008) ext2load doesn't seem to work in the current u-boot beagle board git repo. For the moment follow the [http://code.google.com/p/beagleboard/wiki/LinuxBootDiskFormat LinuxBootDisk guide] to setup a 50-100MB FAT partition on your SD Card to use u-boot's fatload.
+
== Debian 8 (jessie) ==
 +
 
 +
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 +
 
 +
So For the BeagleBoard xM:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 +
 
 +
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
 +
 
 +
= Demo Image =
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.4.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-rt-4.1.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2016-01-14
 +
** BeagleBoard xM: v4.4.0-armv7-x3 kernel
 +
** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
 +
** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
 +
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBoard xM: v4.3.2-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
 +
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
 +
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBoard xM: v4.3.0-armv7-x0 kernel
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
 +
 
 +
Default user: debian pass: temppwd
  
Using fdisk and dosfstools on your SD card "/dev/sdX" or use fdisk -l to find device name.
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-01-14/elinux/debian-8.2-console-armhf-2016-01-14.tar.xz
  
  fdisk /dev/sdX
+
Verify Image with:
 +
  sha256sum debian-8.2-console-armhf-2016-01-14.tar.xz
 +
8968f1755bf9474738df7b9f5da42c5dc518cce3dbb954761848c13ee0152ef5  debian-8.2-console-armhf-2016-01-14.tar.xz
  
Delete all partitions and create a new 50MB FAT partition for uImage
+
Unpack Image:
 +
tar xf debian-8.2-console-armhf-2016-01-14.tar.xz
 +
cd debian-8.2-console-armhf-2016-01-14
  
  Disk /dev/sdX: 2038 MB, 2038431744 bytes
+
If you don't know the location of your SD card:
  255 heads, 63 sectors/track, 247 cylinders
+
  sudo ./setup_sdcard.sh --probe-mmc
Units = cylinders of 16065 * 512 = 8225280 bytes
+
 
Disk identifier: 0x0008e471
+
You should see something like:
 +
 
 +
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
   
 
   
  Device Boot      Start        End      Blocks  Id System
+
  fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  Command (m for help): n
+
  lsblk:
  Command action
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
   e   extended
+
sda      8:0   0 465.8G  0 disk
   p   primary partition (1-4)
+
├─sda1   8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
  p
+
├─sda2  8:2   0    1K  0 part
  Partition number (1-4): 1
+
└─sda5  8:5    0  18.9G  0 part [SWAP]
First cylinder (1-247, default 1):  
+
sdd      8:48  1  3.7G  0 disk
  Using default value 1
+
├─sdd1  8:49  1    64M  0 part
  Last cylinder or +size or +sizeM or +sizeK (1-247, default 247): +50M
+
└─sdd2  8:50   1  3.6G  0 part
   
+
 
  Command (m for help): t
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  Selected partition 1
+
 
  Hex code (type L to list codes): c
+
Install Image:
  Changed system type of partition 1 to c (W95 FAT32 (LBA))
+
 
   
+
Quick install script for [board]
  Command (m for help): a
+
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  Partition number (1-4): 1
+
 
   
+
board options:
  Command (m for help): w
+
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
  The partition table has been altered!
+
*BeagleBoard xM                  - omap3-beagle-xm
   
+
*BeagleBone White/Black/Green    - beaglebone
Calling ioctl() to re-read partition table.
+
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2016.01 -b tmp
 +
 
 +
Stable:
 +
 
 +
  ./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
 +
 
 +
Testing:
 +
 
 +
  ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 +
 
 +
== Debian Testing (stretch) ==
 +
 
 +
Image Updated:
 +
*2016-01-14
 +
** archive broken: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810785
 +
*2015-12-11
 +
** BeagleBoard xM: v4.3.2-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
 +
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
 +
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBoard xM: v4.3.0-armv7-x0 kernel
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-12-11/elinux/debian-stretch-console-armhf-2015-12-11.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-stretch-console-armhf-2015-12-11.tar.xz
 +
1a87d83e4238b52b10d616a345a5ce4e3bc04dbb86590e981f6ae5e45e55b7ba  debian-stretch-console-armhf-2015-12-11.tar.xz
 +
 
 +
Unpack image:
 +
  tar xf debian-stretch-console-armhf-2015-12-11.tar.xz
 +
  cd debian-stretch-console-armhf-2015-12-11
 +
 
 +
Then follow the directions shown above with the other images...
 +
 
 +
= Flasher =
 +
 
 +
== eMMC: BeagleBone Black/Green ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Image Updated:
 +
*2016-01-14
 +
** BeagleBone Black/Green: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBone Black/Green: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBone Black/Green: v4.1.12-ti-r29 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
 
 +
Verify Image with:
 +
  sha256sum BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb*
 +
9e880b7b5614b6d1d9414cc036d292d7e1bd6680f3a7c3792fb6a21a63f93be6  BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
  f68df6578f1e38aaab298d61a8f5f400286c325af53387b1146aedcaf8afcf00  BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
 
 +
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
 +
BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
 +
 
 +
Linux: (dd)
 +
  unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
 +
 
 +
== eMMC: BeagleBoard-X15 ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Image Updated:
 +
*2016-01-14
 +
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
 
 +
Verify Image with:
 +
sha256sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb*
 +
74b5b685869a472d0a0c86d0bfd050b3cd8c5f169c6b08781a05c6c8a6762879  bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
c1e660bacc5a29f2e550be1226907faca40c7a5124d100d875b6f262bc7261ca  bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
 
 +
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
 +
bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
 +
 
 +
Linux: (dd)
 +
  unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
  sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
 +
 
 +
= raw microSD img =
 +
 
 +
== BeagleBone White/Black/Green ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
  sudo reboot
 +
 
 +
Image Updated:
 +
*2016-01-14
 +
** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
  wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
 
 +
Verify Image with:
 +
sha256sum bone-debian-8.2-console-armhf-2016-01-14-2gb*
 +
8fc766ce8e7b561517b1fbc18353e477368ab7c28e5ab2ffb90a15bb034220dd  bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
96f74695382e18e8c5cba1b3ee2ddca220a2a192d5ccd6d29a8e944b843ae4de  bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
 
 +
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
 +
bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
 +
 
 +
Linux: (dd)
 +
  unxz bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
  sudo dd if=./bone-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
 +
 
 +
== OMAP5432 uEVM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Format the 1st partition with dosfstools
+
Image Updated:
 +
*2016-01-14
 +
** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
  
  mkfs.msdos -F 32 /dev/sdX1
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap
  
For reference, a 2GB sd card will look like this:
+
Verify Image with:
 +
sha256sum omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb*
 +
fba8580490fac9d2d8e0ae57e24bc422e12e9e7bcc1c339180d28559523efa70  omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
86449a8137c76517076b00a83f01f1d6982c3a830baec7359f4cbabee3c0af4e  omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
  
Disk /dev/sdb: 2038 MB, 2038431744 bytes
+
Linux: (bmaptool 3.2)
  255 heads, 63 sectors/track, 247 cylinders
+
  sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
Units = cylinders of 16065 * 512 = 8225280 bytes
+
  omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
Disk identifier: 0x0008e471
 
 
  Device Boot      Start        End      Blocks  Id  System
 
  /dev/sdb1  *          1          7      56196    c  W95 FAT32 (LBA)
 
  
NOTE: For some reason, on my 256 MB SD card, I had to have End >= 5 AND odd for /dev/sde1 (ie. 6 did not work)
+
Linux: (dd)
 +
unxz omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
  
==Preparation==
+
== BeagleBoard-X15 ==
  
Create a working directory to keep your files organized.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
mkdir debian-armel
+
User: debian
cd debian-armel/
+
pass: temppwd
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.24-1-versatile
 
  
==Install Debian==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
To install (ARM EABI) Debian inside QEMU:
+
Image Updated:
 +
*2016-01-14
 +
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
  
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.24-1-versatile -initrd initrd.gz -m 256 -hda /dev/sdX -append "root=/dev/ram mem=256M"
+
Get prebuilt image:
Note: root/sudo access is required to access /dev/sde directly & verify /dev/sdX with fdisk -l
+
  wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap
  
Partition disks, default settings should work for most: Guided - use the largest continuous free space
+
Verify Image with:
 +
sha256sum bbx15-debian-8.2-console-armhf-2016-01-14-2gb*
 +
74ad41cbd92df34fc3a70e48d9adfeedbd98fcbaf2ff4cdc5b0a82615d924ad6  bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap
 +
331dbf5499151122c4bd08d0cb0b62bb115490d49ef120b4f1a6ff0d15430cb9  bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
  
[[Image:Beagleboarddebian-partitiondisk.png]]
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
 +
bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
  
==Running Debian==
+
Linux: (dd)
 +
unxz bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
 +
sudo dd if=./bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX
  
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.24-1-versatile -m 256 -hda /dev/sde -append "root=/dev/sda2 mem=256M"
+
= Debian Configuration =
  
Note: Time will be incorrect.
+
==Install Latest Kernel Image==
  
  sudo apt-get install ntpdate
+
General apt syntax for searching and installing a specific kernel:
  ntpdate pool.ntp.org
+
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
  sudo apt-get install linux-image-<specific version>
 +
  sudo reboot
  
Install default deb packages for linux-image & linux-headers.
+
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
wget http://www.rcn-ee.com/deb/lenny/2.6.26-omap1-oer61/linux-image-2.6.26-omap1-oer61_2.6.26-omap1-oer61-10.00.Custom_armel.deb
+
== 3.8.x ==
  wget http://www.rcn-ee.com/deb/lenny/2.6.26-omap1-oer61/linux-headers-2.6.26-omap1-oer61_2.6.26-omap1-oer61-10.00.Custom_armel.deb
+
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
sudo dpkg -i *.deb
+
  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
Note: It's easier to download these straight to the sd card after you've mounted the SD card to copy uImage to the FAT partition.
 
  
Stop QEMU and remount SD card to copy uImage to FAT partition:
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
 +
--bone-channel --stable
  
  cd /media/disk-1/
+
  3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
  wget http://www.rcn-ee.com/deb/lenny/2.6.26-omap1-oer61/uImage
+
  --bone-xenomai-channel --stable
  
=Beagleboard=
+
== 4.1.x-ti ==
 +
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
  
Insert SD Card and power up Beagleboard.
+
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
 +
--ti-channel --stable
  
==Boot==
+
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --stable
  
Using a terminal program, stop u-boot and add these commands:
+
== Mainline (lts) ==
  
  setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
  4.1.x BeagleBone/BeagleBone Black + SGX
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:vram:2M,vram:4M'
+
  --bone-kernel --lts
  boot
 
  
To force the Beagleboard to always boot the sd card image:
+
4.1.x BeagleBone/BeagleBone Black + RT + SGX
 +
--bone-rt-kernel --lts
  
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
== Mainline ==
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:vram:2M,vram:4M'
+
  4.3.x BeagleBone/BeagleBone Black
  saveenv
+
  --bone-kernel --testing
  boot
 
  
Note: 'rootwait' only works with newer kernels, for 2.6.22.18-omap3 use 'rootdelay=2', otherwise this error:
+
== Debian 8: jessie ==
  VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0)
+
  sudo apt-get install linux-image-armmp
Please append a correct "root=" boot option; here are the available partitions:
 
1f00        512 mtdblock01f00        512 mtdblock0 (driver?)
 
1f01      1920 mtdblock11f01      1920 mtdblock1 (driver?)
 
1f02        128 mtdblock21f02        128 mtdblock2 (driver?)
 
1f03      5120 mtdblock31f03      5120 mtdblock3 (driver?)
 
1f04    254464 mtdblock41f04    254464 mtdblock4 (driver?)
 
  
==Debian on Beagleboard==
+
Reboot with your new Kernel Image.
  
Debian on BeagleBoard uses the following configuration:
+
== Xorg Drivers ==
  
* Console log = Serial Terminal
+
Script:
* User Console = HDMI port + usb (keyboard, mouse, etc)
+
cd /opt/scripts/tools/
 +
git pull
  
If you want to log in with the serial port, you will have to add to /etc/inittab
+
BeagleBoard/PandaBoard:
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
And if you want to log in as root on the serial port, add ttyS2 to /etc/securetty.
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
===Xorg===
+
== SGX Drivers ==
Modify /etc/X11/xorg.conf
 
Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
[[Image:Beagleboarddebian-GNOME.jpg]]
+
=== SGX BeagleBone/BeagleBone Black ===
  
Note: 'fbdev' is normally *slow* since it completely relies on the system cpu to update the framebuffer. Once the video processing core's driver is released this will no longer be an issue.
+
Note, these are FBDEV only, no xorg/x11/etc...
  
=Current Issues=
+
Install the "4.1.x" lts/bone kernel:
 +
http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
  
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue date MMDDHHMMYYYY
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
=Building a Native Debian Kernel with QEMU=
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
 +
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
==Install Dependencies==
+
Verify omaplfb & pvrsrvkm loaded
   
+
  debian@arm:~$ lsmod | grep omaplfb
  apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev
+
  omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
==u-boot==
+
= Building Kernel =
  
wget -nc http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
tar -xf u-boot_beagle_revb.tar.gz
 
cd u-boot/
 
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3530beagle_config
 
make CROSS_COMPILE= tools
 
  
Add /tools/ to $PATH
+
== Beagle/Beagle xM ==
  PATH=/home/<user>/u-boot/tools:"${PATH}"
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
==Linux Kernel==
+
== BeagleBone ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone
  
  git clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
== BeagleBone Black ==
cd linux-omap-2.6/
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
git checkout -b beagle <tag>
 
  
Patch Kernel as you see fit
+
== Panda/Panda ES ==
  patch -p1 < ../patches/*.patch
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
Setup Kernel .config
+
= Upgrading from Debian 5 to Debian 6 =
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3_beagle_defconfig
 
  
Create Debian linux-image* & linux-headers* Package
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
make-kpkg --cross_compile - clean
 
CONCURRENCY_LEVEL=1 fakeroot make-kpkg --cross_compile - --initrd kernel_image kernel_headers
 
  
Create U-boot uImage
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
make CROSS_COMPILE= uImage
 
  
Issues:
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
Debian's gcc-4.3 will fail to build a bootable uImage, so use gcc-4.2 as gcc thru 'update-alternatives'
 
  
==Successfully Built Images==
+
sudo apt-get update ; sudo apt-get upgrade
[http://www.rcn-ee.com/code/beagle/debian/lenny/ Example Debian Lenny Kernel Images]
+
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 22:04, 15 January 2016

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard xM --dtb omap3-beagle-xm
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.4.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-rt-4.1.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2016-01-14
    • BeagleBoard xM: v4.4.0-armv7-x3 kernel
    • BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
    • OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
    • BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBoard xM: v4.3.2-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
    • OMAP5432 uEVM: v4.1.13-ti-r36 kernel
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard xM: v4.3.0-armv7-x0 kernel
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/elinux/debian-8.2-console-armhf-2016-01-14.tar.xz

Verify Image with:

sha256sum debian-8.2-console-armhf-2016-01-14.tar.xz
8968f1755bf9474738df7b9f5da42c5dc518cce3dbb954761848c13ee0152ef5  debian-8.2-console-armhf-2016-01-14.tar.xz

Unpack Image:

tar xf debian-8.2-console-armhf-2016-01-14.tar.xz
cd debian-8.2-console-armhf-2016-01-14

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2016.01 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2016-01-14
  • 2015-12-11
    • BeagleBoard xM: v4.3.2-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
    • OMAP5432 uEVM: v4.1.13-ti-r36 kernel
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard xM: v4.3.0-armv7-x0 kernel
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-12-11/elinux/debian-stretch-console-armhf-2015-12-11.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2015-12-11.tar.xz
1a87d83e4238b52b10d616a345a5ce4e3bc04dbb86590e981f6ae5e45e55b7ba  debian-stretch-console-armhf-2015-12-11.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2015-12-11.tar.xz
cd debian-stretch-console-armhf-2015-12-11

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-01-14
    • BeagleBone Black/Green: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBone Black/Green: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBone Black/Green: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb*
9e880b7b5614b6d1d9414cc036d292d7e1bd6680f3a7c3792fb6a21a63f93be6  BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
f68df6578f1e38aaab298d61a8f5f400286c325af53387b1146aedcaf8afcf00  BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-01-14
    • BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb*
74b5b685869a472d0a0c86d0bfd050b3cd8c5f169c6b08781a05c6c8a6762879  bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap
c1e660bacc5a29f2e550be1226907faca40c7a5124d100d875b6f262bc7261ca  bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./bbx15-eMMC-flasher-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX

raw microSD img

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-01-14
    • BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum bone-debian-8.2-console-armhf-2016-01-14-2gb*
8fc766ce8e7b561517b1fbc18353e477368ab7c28e5ab2ffb90a15bb034220dd  bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap
96f74695382e18e8c5cba1b3ee2ddca220a2a192d5ccd6d29a8e944b843ae4de  bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./bone-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-01-14
    • OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • OMAP5432 uEVM: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb*
fba8580490fac9d2d8e0ae57e24bc422e12e9e7bcc1c339180d28559523efa70  omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap
86449a8137c76517076b00a83f01f1d6982c3a830baec7359f4cbabee3c0af4e  omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./omap5-uevm-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-01-14
    • BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum bbx15-debian-8.2-console-armhf-2016-01-14-2gb*
74ad41cbd92df34fc3a70e48d9adfeedbd98fcbaf2ff4cdc5b0a82615d924ad6  bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap
331dbf5499151122c4bd08d0cb0b62bb115490d49ef120b4f1a6ff0d15430cb9  bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-debian-8.2-console-armhf-2016-01-14-2gb.bmap \
bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./bbx15-debian-8.2-console-armhf-2016-01-14-2gb.img of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.1.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --stable
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --stable

Mainline (lts)

4.1.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts
4.1.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts

Mainline

4.3.x BeagleBone/BeagleBone Black
--bone-kernel --testing

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade