Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (DSP: double dsp)
m (2016-04-07)
(129 intermediate revisions by 11 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
 
 
*armhf
 
** Port Details: http://wiki.debian.org/ArmHardFloatPort
 
** Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
 
= Help =
 
= Help =
Line 16: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.2.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.6.x) branch]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 28: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
Line 37: Line 34:
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
 
== Debian Squeeze ==
 
  
git clone git://github.com/RobertCNelson/netinstall.git
+
== Debian 8 (jessie) ==
cd netinstall
 
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 
 
"board" Options:
 
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx    - beagle_cx
 
*BeagleBoard xMA/B/C    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax - panda
 
*PandaBoard ES - panda_es
 
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
 
*Options:
 
*Options:
**--uboot : beagle, panda, bone
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
  
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
+
= Demo Image =
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.5.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.4.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
  
==Beagleboard: NetInstall==
+
Image Updated:
 +
*2016-04-07
 +
** BeagleBoard xM: v4.5.0-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.4.6-ti-r15 kernel
 +
** OMAP5432 uEVM: v4.4.6-ti-r15 kernel
 +
** BeagleBoard-X15: v4.4.6-ti-r15 kernel
 +
*2016-03-11
 +
** BeagleBoard xM: v4.4.4-armv7-x5 kernel
 +
** BeagleBone White/Black/Green: v4.1.18-ti-r52 kernel
 +
** OMAP5432 uEVM: v4.1.18-ti-r52 kernel
 +
** BeagleBoard-X15: v4.1.18-ti-r52 kernel
 +
*2016-02-11
 +
** BeagleBoard xM: v4.4.1-armv7-x5 kernel
 +
** BeagleBone White/Black/Green: v4.1.17-ti-rt-r47 kernel
 +
** OMAP5432 uEVM: v4.1.17-ti-rt-r47 kernel
 +
** BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel
  
  Choose a language
+
Services Active:
  C - No localization
+
  Note: Depending on your internal network these may work out of the box
  English - English
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
  
Configure the network:
+
Default user: debian pass: temppwd
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
 
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
 
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Get prebuilt image:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
wget https://rcn-ee.com/rootfs/2016-04-07/elinux/debian-8.4-console-armhf-2016-04-07.tar.xz
  
Configuring usb0 network bridge for 2.6.29:
+
Verify Image with:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
sha256sum debian-8.4-console-armhf-2016-04-07.tar.xz
  # ifconfig ethX 0.0.0.0
+
3cb6efb6f619ed63e4a0502e0e82ef2f510984c4a4f04e6ba9a71587c2f791d9  debian-8.4-console-armhf-2016-04-07.tar.xz
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Unpack Image:
 +
  tar xf debian-8.4-console-armhf-2016-04-07.tar.xz
 +
cd debian-8.4-console-armhf-2016-04-07
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
If you don't know the location of your SD card:
  Logical Volume Manager not available: <Continue>
+
sudo ./setup_sdcard.sh --probe-mmc
  
Partition disks:
+
You should see something like:
  Guided - Use the largest continuous free space
 
  
  Partitioning scheme....
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
Example:
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
 
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
No installable kernel was found in the defined APT sources? :  
+
Install Image:
  Continue without installing a kernel? : <yes>
 
  
  Standard System
+
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
No BootLoader: <ok>
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
  
==Beagleboard: Install Latest Kernel==
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
Script File:
+
Advanced: Build Image:
  
  Lenny:
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
+
  cd omap-image-builder
  sudo /bin/bash install-me.sh
+
  git checkout v2016.04 -b tmp
 
Squeeze:
 
export DIST=squeeze
 
export ARCH=armel
 
 
Beagle/Panda
 
export BOARD=omap
 
 
BeagleBone
 
export BOARD=omap-psp
 
 
wget http://rcn-ee.net/deb/${DIST}-${ARCH}/LATEST-${BOARD}
 
  wget $(cat ./LATEST-${BOARD} | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new Kernel
+
Stable:
  
= Demo Image =
+
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
  
== Debian Wheezy snapshot ==
+
Testing:
  
Default username/password:
+
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
*username: debian
 
*password: temppwd
 
  
Default root user/password
+
== Debian Testing (stretch) ==
*user: root
 
*password: root
 
  
 
Image Updated:
 
Image Updated:
*2012-11-29
+
*2016-04-07
** Beagle/Panda ES: v3.6.8-x4 kernel
+
** BeagleBoard xM: v4.5.0-armv7-x2 kernel
** Panda: v3.2.34-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
+
** BeagleBone White/Black/Green: v4.4.6-ti-r15 kernel
** Bone: v3.2.33-psp26 kernel (next release should be v3.7.x based)
+
** OMAP5432 uEVM: v4.4.6-ti-r15 kernel
* October 19th
+
** BeagleBoard-X15: v4.4.6-ti-r15 kernel
** Beagle/Panda ES: v3.6.2-x3 kernel
+
*2016-03-11
** Panda: v3.2.32-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
+
** BeagleBoard xM: v4.4.4-armv7-x5 kernel
** Bone: v3.2.32-psp25 kernel
+
** BeagleBone White/Black/Green: v4.1.18-ti-r52 kernel
* September 27th
+
** OMAP5432 uEVM: v4.1.18-ti-r52 kernel
** Beagle/Panda: v3.2.30-x14 kernel
+
** BeagleBoard-X15: v4.1.18-ti-r52 kernel
** Bone: v3.2.30-psp23 kernel
 
* September 10th
 
** Beagle/Panda: v3.2.28-x14 kernel
 
** Bone: v3.2.28-psp21 kernel (not with "backlight" support for CircuitCo LCD3)
 
*July 29th: 2012-07-29
 
** Beagle/Panda: v3.2.24-x14 kernel
 
** Bone: v3.2.23-psp18 kernel
 
*July 16th: 2012-07-16
 
** Beagle/Panda: v3.2.23-x14 kernel
 
** Bone: v3.2.21-psp16 kernel
 
*June 12th: 2012-06-10
 
** Beagle/Panda: v3.2.19-x13 kernel
 
** Bone: v3.2.18-psp14 kernel (now supports the BeagleBone LCD from CircuitCo)
 
 
 
Services Active:
 
Note: Depending on your internal network these may work out the box
 
Apache, Port 80: http://arm/
 
SSH, Port 22: ssh ubuntu@arm
 
Getty, Serial Port
 
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-04-07/elinux/debian-stretch-console-armhf-2016-04-07.tar.xz
  
  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
Verify Image with:
  mirrors (will take some time to update):
+
  sha256sum debian-stretch-console-armhf-2016-04-07.tar.xz
  wget http://ynezz.ibawizard.net/beagleboard/wheezy/debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
  cbf9d1124b9d38e5d3b707fa3e2c57cac3e34d566668b6ed701c1f23d2e20780 debian-stretch-console-armhf-2016-04-07.tar.xz
  
Verify Image with:  
+
Unpack image:
  md5sum debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
  tar xf debian-stretch-console-armhf-2016-04-07.tar.xz
  60e6897c9e85383324e920c177a8c4ae  debian-wheezy-minimal-armhf-2012-11-29.tar.xz
+
  cd debian-stretch-console-armhf-2016-04-07
  
Unpack Image:
+
Then follow the directions shown above with the other images...
tar xJf debian-wheezy-minimal-armhf-2012-11-29.tar.xz
 
cd debian-wheezy-minimal-armhf-2012-11-29
 
  
Install Image:
+
= Flasher =
  
Quick Install script for "board"
+
== eMMC: BeagleBone Black/Green ==
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
 
  
"board" options:  
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx/Dx - beagle_cx
 
*BeagleBoard xM    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax    - panda
 
*PandaBoard ES    - panda_es
 
  
So For the BeagleBoard xM:
+
Script for reference: (this is the script that writes to the eMMC)
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
*Additional Options
+
This script will only take about 5-6 Minutes after power on.
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
= Debian Configuration =
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
== Serial Ports ==
+
User: debian
 +
pass: temppwd
  
Lenny
+
Image Updated:
 +
*2016-04-07
 +
** BeagleBone Black/Green: v4.4.6-ti-r15 kernel
 +
*2016-03-11
 +
** BeagleBone Black/Green: v4.1.18-ti-r52 kernel
 +
*2016-02-11
 +
** BeagleBone Black/Green: v4.1.17-ti-rt-r47 kernel
  
edit /etc/inittab and add:
+
Get prebuilt image:
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
wget https://rcn-ee.com/rootfs/2016-04-07/flasher/BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
 +
  wget https://rcn-ee.com/rootfs/2016-04-07/flasher/BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap
  
For root access over the serial port add ttyS2 to /etc/securetty
+
Verify Image with:
 +
sha256sum BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb*
 +
3be4029c77e2e5cb90b54d880acc863ea492251997cc4cffb0a98f739a31b2dd  BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap
 +
13b3c86f867698dadeeb751c2d1cda4846bae33149648a2b8f43da1b534942bf  BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
  
 +
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX
  
 +
Linux: (dd)
 +
xzcat BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  
Squeeze
+
== eMMC: BeagleBoard-X15 ==
  
edit /etc/inittab and add:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  S:2345:respawn:/sbin/getty 115200 ttyO2
 
  
== WiFi ==
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
This script will only take about 5-6 Minutes after power on.
  
== SGX Video Acceleration ==
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
=== SGX armel/armhf v3.4.x+ ===
+
User: debian
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
+
pass: temppwd
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
Image Updated:
 +
*2016-04-07
 +
** BeagleBoard-X15: v4.4.6-ti-r15 kernel
 +
*2016-03-11
 +
** BeagleBoard-X15: v4.1.18-ti-r52 kernel
 +
*2016-02-11
 +
** BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
Get prebuilt image:
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  wget https://rcn-ee.com/rootfs/2016-04-07/flasher/bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
cd stable-kernel
+
  wget https://rcn-ee.com/rootfs/2016-04-07/flasher/bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap
git checkout origin/v3.6.x -b v3.6.x
 
  ./build_kernel.sh (and then follow the directions as the script runs...)
 
  
Build kernel
+
Verify Image with:
  ./build_kernel.sh
+
  sha256sum bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb*
 +
3acd89816b521687eb1f22997f2ac636cc28ef5810ce288a8433d2b86ce1f527  bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap
 +
d7d62881a83a35cfed9bd9ff24c20a7d013795a2e0551bd820b96bca22325bad  bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
  
Build SGX modules
+
Linux: (bmaptool 3.2)
  ./sgx_build_modules.sh
+
  sudo bmaptool copy bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX
  
Insert SD card, make sure to modify MMC in system.sh
+
Linux: (dd)
  ./tools/install_image.sh
+
  xzcat bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  
Place SD card into the device and boot...
+
= raw microSD img =
cd /opt/sgx
 
sudo tar xf GFX_4.0*_libs.tar.gz
 
sudo ./install-sgx.sh
 
  
Reboot, check modules (lsmod):
+
== BeagleBoard xM ==
Module                  Size  Used by
 
bufferclass_ti          5727  0
 
omaplfb                11512  0
 
pvrsrvkm              165208  2 bufferclass_ti,omaplfb
 
  
Blit Test:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
 
------------------ SGX 3D Blit test -----------------
 
----------------------- Start -----------------------
 
Call PVRSRVConnect with a valid argument:
 
  OK
 
Get number of devices from PVRSRVEnumerateDevices:
 
  OK
 
.... Reported 1 devices
 
.... Device Number  | Device Type
 
            0000    | PVRSRV_DEVICE_ID_SGX
 
Attempt to acquire device 0:
 
  OK
 
Getting SGX Client info
 
  OK
 
.... ui32ProcessID:1133
 
Display Class API: enumerate devices
 
  OK
 
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
  OK
 
Display Class API: open device
 
  OK
 
Display Class API: Get display info
 
  OK
 
.... Name:PowerVR OMAP Linux Display Driver
 
.... MaxSwapChains:1
 
.... MaxSwapChainBuffers:1
 
.... MinSwapInterval:0
 
.... MaxSwapInterval:1
 
Display Class API: enumerate display formats
 
  OK
 
  OK
 
.... Display format 0 - Pixelformat:1
 
Display Class API: enumerate display dimensions
 
  OK
 
  OK
 
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
Attempt to create memory context for SGX:
 
  OK
 
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
.... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
Display Class API: get the system (primary) buffer
 
  OK
 
Display Class API: map display surface to SGX
 
  OK
 
Attempt to create transfer context for SGX:
 
  OK
 
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
(bottom right quadrant should be red on blue background):
 
  OK
 
  OK
 
Do a SRCCOPY blit to the top left quadrant of the display:
 
(top left quadrant should be striped (r/g/b/w) on blue background):
 
  OK
 
  OK
 
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
(top right quadrant should be yellow):
 
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
  OK
 
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
and then present the RGB565 to the bottom right quadrant of the screen
 
(bottom right quadrant should be a red gradient):
 
  OK
 
  OK
 
  OK
 
  OK
 
Free the off screen surfaces:
 
  OK
 
  OK
 
  OK
 
  OK
 
Destroy the transfer context:
 
  OK
 
Display Class API: unmap display surface from SGX
 
  OK
 
Destroy Device Memory Context
 
Display Class API: close the device
 
  OK
 
Release SGX Client Info:
 
  OK
 
Disconnect from services:
 
  OK
 
------------------ SGX 3D Blit test -----------------
 
------------------------ End ------------------------
 
  
=== SGX Legacy armel only upto v3.2.x ===
+
User: debian
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+
pass: temppwd
  
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Auto partition resize:
  https://github.com/RobertCNelson/stable-kernel
+
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+
Image Updated:
https://github.com/RobertCNelson/stable-kernel/issues/8
+
*2016-04-07
oneiric:
+
** BeagleBoard xM: v4.5.0-armv7-x2 kernel
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
 
/bin/bash install-me.sh
 
  
==== SDK unPackage Script ====
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbxm-debian-8.4-console-armhf-2016-04-07-2gb.bmap
  
Download the latest version of the "create_sgx_package.sh" script
+
Verify Image with:
  2.6.37
+
  sha256sum bbxm-debian-8.4-console-armhf-2016-04-07-2gb*
  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
+
  3acd89816b521687eb1f22997f2ac636cc28ef5810ce288a8433d2b86ce1f527 bbxm-debian-8.4-console-armhf-2016-04-07-2gb.bmap
  2.6.38->3.2.x
+
  d7d62881a83a35cfed9bd9ff24c20a7d013795a2e0551bd820b96bca22325bad  bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
 
  
Make script executable
+
Linux: (bmaptool 3.2)
  chmod a+x ./create_sgx_package_*.sh
+
  sudo bmaptool copy bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX
  
Run script
+
Linux: (dd)
  ./create_sgx_package_*.sh
+
  xzcat bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  
After Successfully running:
+
== BeagleBone White/Black/Green ==
  
:~/temp$ ls
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
create_sgx_package.sh
 
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
 
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
==== Beagle: GFX_*_libs.tar.gz ====
+
User: debian
 +
pass: temppwd
  
  tar xf GFX_4_00_00_01_libs.tar.gz (extracts install-SGX.sh and run-SGX.sh)
+
Auto partition resize:
  ./install-SGX.sh (copies necessary SGX libs and startup script)
+
  cd /opt/scripts/tools
  ./run-SGX.sh (force run the new init script, or you can just reboot...)
+
  git pull
 +
  ./grow_partition.sh
 +
  sudo reboot
  
On successful install:
+
Image Updated:
Stopping PVR
+
*2016-04-07
Starting PVR
+
** BeagleBone White/Black/Green: v4.4.6-ti-r15 kernel
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
+
*2016-03-11
 +
** BeagleBone White/Black/Green: v4.1.18-ti-r52 kernel
 +
*2016-02-11
 +
** BeagleBone White/Black/Green: v4.1.17-ti-rt-r47 kernel
  
Reboot for good measure
+
Get prebuilt image:
  sudo reboot
+
  wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bone-debian-8.4-console-armhf-2016-04-07-2gb.bmap
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
Verify Image with:
 +
sha256sum bone-debian-8.4-console-armhf-2016-04-07-2gb*
 +
1ba25ee443a9b872edd76c95d73b78c142f4027709b2e788017ac7457c8ad8d8  bone-debian-8.4-console-armhf-2016-04-07-2gb.bmap
 +
786df47a308095462b129a6ff2e5fc7bbe90442441ffa8739c338bbee7d8b321  bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
  
tar xf GFX_Linux_SDK.tar.gz
+
Linux: (bmaptool 3.2)
  cd GFX_Linux_SDK
+
  sudo bmaptool copy bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX
tar xf OGLES.tar.gz
 
  
==== Test SGX with a DEMO ====
+
Linux: (dd)
 +
xzcat bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  
cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
== OMAP5432 uEVM ==
./OGLESEvilSkull
 
  
==== Trouble Shooting ====
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
sudo rm /etc/powervr-esrev
+
User: debian
sudo depmod -a omaplfb
+
pass: temppwd
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
=== gst-dsp ===
+
Image Updated:
 +
*2016-04-07
 +
** OMAP5432 uEVM: v4.4.6-ti-r15 kernel
 +
*2016-03-11
 +
** OMAP5432 uEVM: v4.1.18-ti-r52 kernel
 +
*2016-02-11
 +
** OMAP5432 uEVM: v4.1.17-ti-rt-r47 kernel
  
The following Gstreamer elements will be installed:
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.bmap
  
  $ gst-inspect | grep dsp
+
Verify Image with:
  dvdspu: dvdspu: Sub-picture Overlay
+
  sha256sum omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb*
  dsp: dspdummy: DSP dummy element
+
  9f9e15b70a0c6a0e4f4d7646d69d288437eaa05fd968d03f5a0c6f68b1d6e9b0 omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.bmap
  dsp: dspvdec: DSP video decoder
+
  89feea1b7703d4ecdd42f2b85c35c216972872873e4bb07abf1eb033118e7240 omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
  dsp: dspadec: DSP audio decoder
 
  dsp: dsph263enc: DSP video encoder
 
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
 
  dsp:  dspjpegenc: DSP video encoder
 
  dsp:  dsph264enc: DSP video encoder
 
  dsp:  dspvpp: DSP VPP filter
 
  dsp:  dspipp: DSP IPP
 
  
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX
  
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+
Linux: (dd)
ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+
xzcat omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX
CONFIG_TIDSPBRIDGE=m
 
CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
 
CONFIG_TIDSPBRIDGE_RECOVERY=y
 
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
# CONFIG_TIDSPBRIDGE_BACKTRACE is not set
 
  
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+
== BeagleBoard-X15 ==
  
Download the latest version of the "create_dsp_package.sh" script
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
 
  
Make script executable
+
User: debian
chmod a+x ./create_dsp_package.sh
+
pass: temppwd
  
Package script:
+
Auto partition resize:
  ./create_dsp_package.sh
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
Copy DSP_Install_libs.tar.gz to Beagle
+
Image Updated:
 +
*2016-04-07
 +
** BeagleBoard-X15: v4.4.6-ti-r15 kernel
 +
*2016-03-11
 +
** BeagleBoard-X15: v4.1.18-ti-r52 kernel
 +
*2016-02-11
 +
** BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel
  
Setup network...
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbx15-debian-8.4-console-armhf-2016-04-07-2gb.bmap
  
Extract:
+
Verify Image with:
  ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
+
  sha256sum bbx15-debian-8.4-console-armhf-2016-04-07-2gb*
 +
4b861a450f1e67f80c789f433100473423ea215fa2d92524a1166b66c771a66e  bbx15-debian-8.4-console-armhf-2016-04-07-2gb.bmap
 +
a89793977176eb4abe049e1c4af86a9ca5f76f4d3946613b4b9572dd50e222b2  bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
  
Install:
+
Linux: (bmaptool 3.2)
  ubuntu@arm:~$ ./install-DSP.sh
+
  sudo bmaptool copy bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX
  
What got installed:
+
Linux: (dd)
  ubuntu@arm:~$ ls -lh /lib/dsp/
+
  xzcat bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX
total 7.1M
 
-rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
 
-rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
 
-rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
 
-rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
 
-rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
 
-rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
 
-rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
 
-rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
 
-rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
 
-rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
 
-rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
 
-rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
 
-rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
 
  
Building gst-dsp stuff:
+
= Debian Configuration =
  
If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+
==Install Latest Kernel Image==
  
Update arm tools directory to the latest:
+
General apt syntax for searching and installing a specific kernel:
  ubuntu@arm:~$ cd /boot/uboot/tools/
+
  sudo apt-get update
  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
  sudo reboot
  
Otherwise, install via git:
+
Latest kernel script
  git clone git://github.com/RobertCNelson/tools.git
+
  cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
Change to the pkgs directory
+
== 3.8.x ==
  ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
+
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
(or if just cloned)
+
  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
ubuntu@arm:~$ cd ~/tools/pkgs
 
  
Build gst-dsp stuff..
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
  ./ti-tidspbridge.sh
+
  --bone-channel --stable
  
Start dspbridge (or just reboot)
+
  3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
  sudo /etc/init.d/dsp_init start
+
--bone-xenomai-channel --stable
  
Test dspbridge
+
== 4.1.x-ti ==
  sudo dsp-test
+
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
  
Playbin:
+
  4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
  sudo gst-launch playbin2 uri=file://(file)
+
--ti-channel --stable
  
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
  Note: it seems broken in Ubuntu precise armhf...
+
  --ti-rt-channel --stable
  
sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+
== Mainline (lts) ==
  
== Xorg omapfb Drivers ==
+
4.1.x BeagleBone/BeagleBone Black + SGX
 +
--bone-kernel --lts
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
4.1.x BeagleBone/BeagleBone Black + RT + SGX
 +
--bone-rt-kernel --lts
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
== Mainline ==
 +
4.3.x BeagleBone/BeagleBone Black
 +
--bone-kernel --testing
  
/etc/X11/xorg.conf:
+
== Debian 8: jessie ==
  Section "Device"
+
  sudo apt-get install linux-image-armmp
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
Reboot with your new Kernel Image.
(II) FBDEV: driver for framebuffer: fbdev
 
(II) FBDEV(0): using default device
 
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Xorg Drivers ==
  
xvinfo -display :0.0
+
Script:
  X-Video Extension version 2.2
+
  cd /opt/scripts/tools/
  screen #0
+
  git pull
  no adaptors present
 
  
=== Drivers ===
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
  ./ti-tilcdc.sh
  
Lenny:
+
== SGX Drivers ==
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
Squeeze/Sid:
+
=== SGX BeagleBone/BeagleBone Black ===
sudo apt-get install xserver-xorg-video-omap3
 
  
=== xorg.conf ===
+
Note, these are FBDEV only, no xorg/x11/etc...
/etc/X11/xorg.conf
 
  
Section "Monitor"
+
Install the "4.1.x" lts/bone kernel:
    Identifier "Configured Monitor"
+
http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
EndSection
 
 
Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
EndSection
 
  
To verify it was correctly installed, reboot and:
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
cat /var/log/Xorg.0.log | grep omapfb
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
  (II) LoadModule: "omapfb"
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
  (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
+
  cd /opt/gfxinstall/
  (II) Module omapfb: vendor="X.Org Foundation"
+
  sudo ./sgx-install.sh
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
+
  sudo reboot
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
  (II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
xvinfo -display :0.0
+
= Building Kernel =
X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
https://github.com/RobertCNelson/stable-kernel
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
Download SRC
+
== BeagleBone ==
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
Build Kernel
+
== BeagleBone Black ==
  ./build_kernel.sh
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Optional Building Deb File
+
== Panda/Panda ES ==
  ./build_deb.sh
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
 
= Upgrading from Debian 5 to Debian 6 =
 
= Upgrading from Debian 5 to Debian 6 =
  
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 +
 +
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
 +
 +
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
 +
 +
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 07:39, 11 April 2016

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.5.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2016-04-07
    • BeagleBoard xM: v4.5.0-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.4.6-ti-r15 kernel
    • BeagleBoard-X15: v4.4.6-ti-r15 kernel
  • 2016-03-11
    • BeagleBoard xM: v4.4.4-armv7-x5 kernel
    • BeagleBone White/Black/Green: v4.1.18-ti-r52 kernel
    • OMAP5432 uEVM: v4.1.18-ti-r52 kernel
    • BeagleBoard-X15: v4.1.18-ti-r52 kernel
  • 2016-02-11
    • BeagleBoard xM: v4.4.1-armv7-x5 kernel
    • BeagleBone White/Black/Green: v4.1.17-ti-rt-r47 kernel
    • OMAP5432 uEVM: v4.1.17-ti-rt-r47 kernel
    • BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/elinux/debian-8.4-console-armhf-2016-04-07.tar.xz

Verify Image with:

sha256sum debian-8.4-console-armhf-2016-04-07.tar.xz
3cb6efb6f619ed63e4a0502e0e82ef2f510984c4a4f04e6ba9a71587c2f791d9  debian-8.4-console-armhf-2016-04-07.tar.xz

Unpack Image:

tar xf debian-8.4-console-armhf-2016-04-07.tar.xz
cd debian-8.4-console-armhf-2016-04-07

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2016.04 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2016-04-07
    • BeagleBoard xM: v4.5.0-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.6-ti-r15 kernel
    • OMAP5432 uEVM: v4.4.6-ti-r15 kernel
    • BeagleBoard-X15: v4.4.6-ti-r15 kernel
  • 2016-03-11
    • BeagleBoard xM: v4.4.4-armv7-x5 kernel
    • BeagleBone White/Black/Green: v4.1.18-ti-r52 kernel
    • OMAP5432 uEVM: v4.1.18-ti-r52 kernel
    • BeagleBoard-X15: v4.1.18-ti-r52 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/elinux/debian-stretch-console-armhf-2016-04-07.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2016-04-07.tar.xz
cbf9d1124b9d38e5d3b707fa3e2c57cac3e34d566668b6ed701c1f23d2e20780  debian-stretch-console-armhf-2016-04-07.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2016-04-07.tar.xz
cd debian-stretch-console-armhf-2016-04-07

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-04-07
    • BeagleBone Black/Green: v4.4.6-ti-r15 kernel
  • 2016-03-11
    • BeagleBone Black/Green: v4.1.18-ti-r52 kernel
  • 2016-02-11
    • BeagleBone Black/Green: v4.1.17-ti-rt-r47 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/flasher/BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-04-07/flasher/BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb*
3be4029c77e2e5cb90b54d880acc863ea492251997cc4cffb0a98f739a31b2dd  BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap
13b3c86f867698dadeeb751c2d1cda4846bae33149648a2b8f43da1b534942bf  BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-04-07
    • BeagleBoard-X15: v4.4.6-ti-r15 kernel
  • 2016-03-11
    • BeagleBoard-X15: v4.1.18-ti-r52 kernel
  • 2016-02-11
    • BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/flasher/bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-04-07/flasher/bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb*
3acd89816b521687eb1f22997f2ac636cc28ef5810ce288a8433d2b86ce1f527  bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.bmap
d7d62881a83a35cfed9bd9ff24c20a7d013795a2e0551bd820b96bca22325bad  bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-04-07
    • BeagleBoard xM: v4.5.0-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbxm-debian-8.4-console-armhf-2016-04-07-2gb.bmap

Verify Image with:

sha256sum bbxm-debian-8.4-console-armhf-2016-04-07-2gb*
3acd89816b521687eb1f22997f2ac636cc28ef5810ce288a8433d2b86ce1f527  bbxm-debian-8.4-console-armhf-2016-04-07-2gb.bmap
d7d62881a83a35cfed9bd9ff24c20a7d013795a2e0551bd820b96bca22325bad  bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX

Linux: (dd)

xzcat bbxm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-04-07
    • BeagleBone White/Black/Green: v4.4.6-ti-r15 kernel
  • 2016-03-11
    • BeagleBone White/Black/Green: v4.1.18-ti-r52 kernel
  • 2016-02-11
    • BeagleBone White/Black/Green: v4.1.17-ti-rt-r47 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bone-debian-8.4-console-armhf-2016-04-07-2gb.bmap

Verify Image with:

sha256sum bone-debian-8.4-console-armhf-2016-04-07-2gb*
1ba25ee443a9b872edd76c95d73b78c142f4027709b2e788017ac7457c8ad8d8  bone-debian-8.4-console-armhf-2016-04-07-2gb.bmap
786df47a308095462b129a6ff2e5fc7bbe90442441ffa8739c338bbee7d8b321  bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX

Linux: (dd)

xzcat bone-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-04-07
    • OMAP5432 uEVM: v4.4.6-ti-r15 kernel
  • 2016-03-11
    • OMAP5432 uEVM: v4.1.18-ti-r52 kernel
  • 2016-02-11
    • OMAP5432 uEVM: v4.1.17-ti-rt-r47 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/microsd/omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.bmap

Verify Image with:

sha256sum omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb*
9f9e15b70a0c6a0e4f4d7646d69d288437eaa05fd968d03f5a0c6f68b1d6e9b0  omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.bmap
89feea1b7703d4ecdd42f2b85c35c216972872873e4bb07abf1eb033118e7240  omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX

Linux: (dd)

xzcat omap5-uevm-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-04-07
    • BeagleBoard-X15: v4.4.6-ti-r15 kernel
  • 2016-03-11
    • BeagleBoard-X15: v4.1.18-ti-r52 kernel
  • 2016-02-11
    • BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-04-07/microsd/bbx15-debian-8.4-console-armhf-2016-04-07-2gb.bmap

Verify Image with:

sha256sum bbx15-debian-8.4-console-armhf-2016-04-07-2gb*
4b861a450f1e67f80c789f433100473423ea215fa2d92524a1166b66c771a66e  bbx15-debian-8.4-console-armhf-2016-04-07-2gb.bmap
a89793977176eb4abe049e1c4af86a9ca5f76f4d3946613b4b9572dd50e222b2  bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz /dev/sdX

Linux: (dd)

xzcat bbx15-debian-8.4-console-armhf-2016-04-07-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.1.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --stable
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --stable

Mainline (lts)

4.1.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts
4.1.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts

Mainline

4.3.x BeagleBone/BeagleBone Black
--bone-kernel --testing

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade