Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Debian Configuration: u-boot scripts for lenny goodbye)
m (2016-10-06)
(197 intermediate revisions by 14 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
** Kernel Trees
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Stable Kernel 2.6.36 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6.38-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
** [http://elinux.org/BeagleBoardUbuntuKernel Kernel Testing Results]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 24: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Squeeze ==
+
== Debian 8 (jessie) ==
 +
 
 +
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
  
git clone git://github.com/RobertCNelson/netinstall-omap.git
+
So For the BeagleBoard xM:
cd netinstall-omap
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  ./mk_mmc.sh --mmc /dev/sdX --uboot beagle --distro squeeze --firmware
 
  
 
*Options:
 
*Options:
**--uboot : beagle, (panda only serial, display not working)
 
**--distro : squeeze
 
 
**--firmware : installs firmware
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--serial-mode : debian-installer uses Serial Port
**--usb-rootfs : (uImage on /dev/mmcblkp0 and rootfs on external usb drive /dev/sda1)
 
  
Note: The default options work for most people, but if you'd like to tweak boot settings, edit these before running the script.  
+
= Demo Image =
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.8.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.4.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2016-10-06
 +
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
 +
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 +
*2016-09-28
 +
** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
 +
** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
 +
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 +
*2016-06-09
 +
** BeagleBoard xM: v4.6.1-armv7-x4 kernel
 +
** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
 +
** OMAP5432 uEVM: v4.4.12-ti-r30 kernel
 +
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
 +
 
 +
Default user: debian pass: temppwd
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-8.6-console-armhf-2016-10-06.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-8.6-console-armhf-2016-10-06.tar.xz
 +
e657544ae239f7a05c67fb1190c11fa05cea3ec265836baed3cc1881bf0a14ea  debian-8.6-console-armhf-2016-10-06.tar.xz
 +
 
 +
Unpack Image:
 +
tar xf debian-8.6-console-armhf-2016-10-06.tar.xz
 +
cd debian-8.6-console-armhf-2016-10-06
 +
 
 +
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
 +
 
 +
You should see something like:
 +
 
 +
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
   
 
   
  NetInstall boot Settings:
+
  fdisk -l:
  gedit ./netinstall-omap/scripts/dvi.cmd
+
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
  gedit ./netinstall-omap/scripts/serial.cmd
+
  Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  Normal Boot Settings:
+
  lsblk:
  gedit ./netinstall-omap/scripts/dvi-normal-squeeze.cmd
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  gedit ./netinstall-omap/scripts/serial-normal-squeeze.cmd
+
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 +
 
 +
Install Image:
 +
 
 +
Quick install script for [board]
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2016.10 -b tmp
 +
 
 +
Stable:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
 +
 
 +
Testing:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 +
 
 +
== Debian Testing (stretch) ==
 +
 
 +
Image Updated:
 +
*2016-10-06
 +
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
 +
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 +
*2016-09-28
 +
** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
 +
** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
 +
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 +
*2016-06-09
 +
** BeagleBoard xM: v4.6.1-armv7-x4 kernel
 +
** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
 +
** OMAP5432 uEVM: v4.4.12-ti-r30 kernel
 +
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-stretch-console-armhf-2016-10-06.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-stretch-console-armhf-2016-10-06.tar.xz
 +
2c25552a6405b9e77d2e60a47e6bc6ed8679d1edf8bfa593e585f542bc24d125  debian-stretch-console-armhf-2016-10-06.tar.xz
 +
 
 +
Unpack image:
 +
tar xf debian-stretch-console-armhf-2016-10-06.tar.xz
 +
cd debian-stretch-console-armhf-2016-10-06
 +
 
 +
Then follow the directions shown above with the other images...
 +
 
 +
= Flasher =
 +
 
 +
== eMMC: BeagleBone Black/Green ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Image Updated:
 +
*2016-10-06
 +
** BeagleBone Black/Green: v4.4.23-ti-r51 kernel
 +
*2016-09-28
 +
** BeagleBone Black/Green: v4.4.22-ti-r48 kernel
 +
*2016-06-09
 +
** BeagleBone Black/Green: v4.4.12-ti-r30 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-10-06/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb*
 +
d6b0d8988949587e3e412141b34a43786bca575d1e2a98519e68f19c4c6e1d04  BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
  xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== eMMC: BeagleBoard-X15 ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Image Updated:
 +
*2016-10-06
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 +
*2016-09-28
 +
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 +
*2016-06-09
 +
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
  
==Beagleboard: NetInstall==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-10-06/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
  Choose a language
+
Verify Image with:
  C - No localization
+
  sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb*
  English - English
+
d0b96a7765362f12bf558b65f5d350200aec2919d9b9ab7269b7c8f105d3aff3  bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
  Configure the network:
+
Windows/Mac/Linux gui
  usb0: USB net <- See below for 2.6.29. Could not find usb0 with B7 installing 2.6.28.
+
  http://etcher.io
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Linux: (dd)
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
  
Configuring usb0 network bridge for 2.6.29:
+
= raw microSD img =
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
 
  # ifconfig ethX 0.0.0.0
 
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
Continue the install without loading kernel modules? : <yes>
+
== BeagleBoard xM ==
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  Logical Volume Manager not available: <Continue>
 
  
Partition disks:
+
User: debian
  Guided - Use the largest continuous free space
+
pass: temppwd
  
  Partitioning scheme....
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
Example:
+
Image Updated:
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
*2016-10-06
>  #1 primary  57.5 MB    fat32
+
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
>  #2 primary  1.8 GB B f ext3  /
+
*2016-09-28
>  #5 logical 148.0 MB  f swap  swap
+
** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
Finish partitioning and write changes to disk
+
*2016-06-09
  Write the changes to disk? : <yes>
+
** BeagleBoard xM: v4.6.1-armv7-x4 kernel
  
No installable kernel was found in the defined APT sources? :  
+
Get prebuilt image:
  Continue without installing a kernel? : <yes>
+
wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
  Standard System
+
Verify Image with:
 +
  sha256sum bbxm-debian-8.6-console-armhf-2016-10-06-2gb*
 +
c69303a8a73fda3b1c2ca60b5bb59fa9801cdf68f183e69d52eaf55a707f1c07  bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
  No BootLoader: <ok>
+
Windows/Mac/Linux gui
 +
  http://etcher.io
  
==Beagleboard: Install Latest Kernel==
+
Linux: (dd)
 +
xzcat bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
  
Script File:
+
== BeagleBone White/Black/Green ==
  
Lenny:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.11-x13/install-me.sh
+
 
  sudo /bin/bash install-me.sh
+
User: debian
+
pass: temppwd
Squeeze:
+
 
export DIST=squeeze
+
Auto partition resize:
  wget http://rcn-ee.net/deb/${DIST}/LATEST
+
cd /opt/scripts/tools
  wget $(cat ./LATEST | grep STABLE | awk '{print $3}')
+
git pull
  /bin/bash install-me.sh
+
./grow_partition.sh
 +
  sudo reboot
 +
 
 +
Image Updated:
 +
*2016-10-06
 +
** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
 +
*2016-09-28
 +
** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
 +
*2016-06-09
 +
** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum bone-debian-8.6-console-armhf-2016-10-06-2gb*
 +
  a94c4a4d5e83d42bb1ccca66af040c546da373a2e4140c49331a558964ef2d6e  bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
  http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
  
Reboot with your new Kernel
+
== OMAP5432 uEVM ==
  
= Debian Configuration =
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
== Serial Ports ==
+
User: debian
 +
pass: temppwd
  
Lenny
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
edit /etc/inittab and add:
+
Image Updated:
S:2345:respawn:/sbin/getty 115200 ttyS2
+
*2016-10-06
 +
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 +
*2016-09-28
 +
** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
 +
*2016-06-09
 +
** OMAP5432 uEVM: v4.4.12-ti-r30 kernel
  
For root access over the serial port add ttyS2 to /etc/securetty
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-10-06/microsd/omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
== WiFi ==
+
Verify Image with:
 +
sha256sum omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb*
 +
2671e0822c69015f4f132c4198eb93de323868513d8a6c3b901826b3bb0d6820  omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
== SGX Video Acceleration ==
+
Linux: (dd)
 +
xzcat omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
== BeagleBoard-X15 ==
  https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
=== SDK unPackage Script ===
+
User: debian
 +
pass: temppwd
  
Download the latest version of the "create_sgx_package.sh" script
+
Auto partition resize:
  wget http://rcn-ee.homeip.net:81/dl/updates/2.6-stable/create_sgx_package.sh
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Make script executable
+
Image Updated:
chmod a+x ./create_sgx_package.sh
+
*2016-10-06
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 +
*2016-09-28
 +
** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 +
*2016-06-09
 +
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
  
Run script
+
Get prebuilt image:
  ./create_sgx_package.sh
+
  wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
After Successfully running:
+
Verify Image with:
 +
sha256sum bbx15-debian-8.6-console-armhf-2016-10-06-2gb*
 +
c6e9b2be24668165d8e0e3d1a9548cdc12f13d2b4de5dca88f3c4e97641366f8  bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
  
:~/temp$ ls
+
Windows/Mac/Linux gui
  create_sgx_package.sh
+
  http://etcher.io
GFX_4_00_00_01_libs.tar.gz                      : -> Copy to Beagle (System Libs)
 
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_4_00_00_01.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
Linux: (dd)
 +
xzcat bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
= Debian Configuration =
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
  
On Successful install:
+
==Install Latest Kernel Image==
Stopping PVR
 
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure (Maverick's Alpha-1 needs this....)
+
General apt syntax for searching and installing a specific kernel:
 +
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
tar xf GFX_Linux_SDK.tar.gz
+
== 3.8.x ==
cd GFX_Linux_SDK
+
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
  tar xf OGLES.tar.gz
+
  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
  
=== Test SGX with a DEMO ===
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
 +
--bone-channel --stable
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/ChameleonMan
+
  3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
  ./OGLESChameleonMan
+
  --bone-xenomai-channel --stable
  
=== Trouble Shooting ===
+
== 4.1.x-ti ==
 +
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
  
  sudo rm /etc/powervr-esrev
+
  4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
  sudo depmod -a omaplfb
+
  --ti-channel --stable
sudo /etc/init.d/pvr restart
 
  
== Xorg omapfb Drivers ==
+
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --stable
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Mainline (lts) ==
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
4.1.x BeagleBone/BeagleBone Black + SGX
 +
--bone-kernel --lts
  
/etc/X11/xorg.conf:
+
4.1.x BeagleBone/BeagleBone Black + RT + SGX
Section "Device"
+
  --bone-rt-kernel --lts
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
== Mainline ==
(II) FBDEV: driver for framebuffer: fbdev
+
  4.3.x BeagleBone/BeagleBone Black
(II) FBDEV(0): using default device
+
--bone-kernel --testing
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
  (==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Debian 8: jessie ==
 +
sudo apt-get install linux-image-armmp
  
xvinfo -display :0.0
+
Reboot with your new Kernel Image.
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
== Xorg Drivers ==
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
Script:
 +
cd /opt/scripts/tools/
 +
  git pull
  
Lenny:
+
BeagleBoard/PandaBoard:
  wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  cd /opt/scripts/tools/graphics/
  sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
+
  ./ti-omapdrm.sh
  
Squeeze/Sid:
+
BeagleBone/BeagleBone Black:
  sudo apt-get install xserver-xorg-video-omap3
+
  cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
=== xorg.conf ===
+
== SGX Drivers ==
/etc/X11/xorg.conf
 
  
Section "Monitor"
+
=== SGX BeagleBone/BeagleBone Black ===
    Identifier "Configured Monitor"
+
 
  EndSection
+
Note, these are FBDEV only, no xorg/x11/etc...
   
+
 
  Section "Screen"
+
Install the "4.1.x" lts/bone kernel:
    Identifier "Default Screen"
+
http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
    Device "Configured Video Device"
+
 
    #Limited by SGX?
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
    DefaultDepth 16
+
  git clone https://github.com/RobertCNelson/bb-kernel.git
  EndSection
+
  cd bb-kernel/
   
+
  git checkout origin/am33x-v4.1 -b tmp-sgx
  Section "Device"
+
./sgx_create_package.sh
    Identifier "Configured Video Device"
+
 
    Driver "omapfb"
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
    Option "fb" "/dev/fb0"
+
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
  EndSection
+
  cd /opt/gfxinstall/
 +
  sudo ./sgx-install.sh
 +
  sudo reboot
 +
 
 +
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
  pvrsrvkm              178782  1 omaplfb
  
To verify it was correctly installed, reboot and:
+
= Building Kernel =
  
cat /var/log/Xorg.0.log | grep omapfb
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
xvinfo -display :0.0
+
== BeagleBone ==
  X-Video Extension version 2.2
+
  http://eewiki.net/display/linuxonarm/BeagleBone
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== DSP ==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
= Kernel Build =
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
https://launchpad.net/~beagleboard-kernel
+
= Upgrading from Debian 5 to Debian 6 =
  
Register on launchpad.net, install bzr
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
sudo apt-get install bzr
 
  
Download SRC
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
  
Build Kernel
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
./build_kernel.sh
 
  
Build Deb File
+
sudo apt-get update ; sudo apt-get upgrade
  ./build_deb.sh
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 11:53, 7 October 2016

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.8.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel
  • 2016-09-28
    • BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
    • OMAP5432 uEVM: v4.4.22-ti-r48 kernel
    • BeagleBoard-X15: v4.4.22-ti-r48 kernel
  • 2016-06-09
    • BeagleBoard xM: v4.6.1-armv7-x4 kernel
    • BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
    • OMAP5432 uEVM: v4.4.12-ti-r30 kernel
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-8.6-console-armhf-2016-10-06.tar.xz

Verify Image with:

sha256sum debian-8.6-console-armhf-2016-10-06.tar.xz
e657544ae239f7a05c67fb1190c11fa05cea3ec265836baed3cc1881bf0a14ea  debian-8.6-console-armhf-2016-10-06.tar.xz

Unpack Image:

tar xf debian-8.6-console-armhf-2016-10-06.tar.xz
cd debian-8.6-console-armhf-2016-10-06

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2016.10 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel
  • 2016-09-28
    • BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
    • OMAP5432 uEVM: v4.4.22-ti-r48 kernel
    • BeagleBoard-X15: v4.4.22-ti-r48 kernel
  • 2016-06-09
    • BeagleBoard xM: v4.6.1-armv7-x4 kernel
    • BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
    • OMAP5432 uEVM: v4.4.12-ti-r30 kernel
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-stretch-console-armhf-2016-10-06.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2016-10-06.tar.xz
2c25552a6405b9e77d2e60a47e6bc6ed8679d1edf8bfa593e585f542bc24d125  debian-stretch-console-armhf-2016-10-06.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2016-10-06.tar.xz
cd debian-stretch-console-armhf-2016-10-06

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-10-06
    • BeagleBone Black/Green: v4.4.23-ti-r51 kernel
  • 2016-09-28
    • BeagleBone Black/Green: v4.4.22-ti-r48 kernel
  • 2016-06-09
    • BeagleBone Black/Green: v4.4.12-ti-r30 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb*
d6b0d8988949587e3e412141b34a43786bca575d1e2a98519e68f19c4c6e1d04  BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-10-06
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel
  • 2016-09-28
    • BeagleBoard-X15: v4.4.22-ti-r48 kernel
  • 2016-06-09
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb*
d0b96a7765362f12bf558b65f5d350200aec2919d9b9ab7269b7c8f105d3aff3  bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel
  • 2016-09-28
    • BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
  • 2016-06-09
    • BeagleBoard xM: v4.6.1-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.6-console-armhf-2016-10-06-2gb*
c69303a8a73fda3b1c2ca60b5bb59fa9801cdf68f183e69d52eaf55a707f1c07  bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-10-06
    • BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
  • 2016-09-28
    • BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
  • 2016-06-09
    • BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.6-console-armhf-2016-10-06-2gb*
a94c4a4d5e83d42bb1ccca66af040c546da373a2e4140c49331a558964ef2d6e  bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-10-06
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel
  • 2016-09-28
    • OMAP5432 uEVM: v4.4.22-ti-r48 kernel
  • 2016-06-09
    • OMAP5432 uEVM: v4.4.12-ti-r30 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/microsd/omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb*
2671e0822c69015f4f132c4198eb93de323868513d8a6c3b901826b3bb0d6820  omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-10-06
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel
  • 2016-09-28
    • BeagleBoard-X15: v4.4.22-ti-r48 kernel
  • 2016-06-09
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.6-console-armhf-2016-10-06-2gb*
c6e9b2be24668165d8e0e3d1a9548cdc12f13d2b4de5dca88f3c4e97641366f8  bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.1.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --stable
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --stable

Mainline (lts)

4.1.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts
4.1.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts

Mainline

4.3.x BeagleBone/BeagleBone Black
--bone-kernel --testing

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade