Revision as of 10:40, 11 November 2016

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees

When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
  - Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

http://beagleboard.org/source

Recommended Beagle Software

Mainline U-Boot:

All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie

Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port

Demo Image

Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.8.x -b tmp
./build_kernel.sh

Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

username: debian
password: temppwd

Image Updated:

2016-11-10
- BeagleBoard xM: v4.8.7-armv7-x4 kernel
- BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
- OMAP5432 uEVM: v4.4.30-ti-r66 kernel
- BeagleBoard-X15: v4.4.30-ti-r66 kernel
2016-10-06
- BeagleBoard xM: v4.8.0-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
- OMAP5432 uEVM: v4.4.23-ti-r51 kernel
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
2016-09-28
- BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
- OMAP5432 uEVM: v4.4.22-ti-r48 kernel
- BeagleBoard-X15: v4.4.22-ti-r48 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/elinux/debian-8.6-console-armhf-2016-11-10.tar.xz

Verify Image with:

sha256sum debian-8.6-console-armhf-2016-11-10.tar.xz
36de938ed618aeb9eb6eebaad611a187d541570733e7065f36b535b21b2af28f  debian-8.6-console-armhf-2016-11-10.tar.xz

Unpack Image:

tar xf debian-8.6-console-armhf-2016-11-10.tar.xz
cd debian-8.6-console-armhf-2016-11-10

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part

In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
BeagleBoard xM - omap3-beagle-xm
BeagleBone White/Black/Green - beaglebone
OMAP5432 uEVM - omap5-uevm
BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2016.11 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

2016-11-10
- BeagleBoard xM: v4.8.7-armv7-x4 kernel
- BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
- OMAP5432 uEVM: v4.4.30-ti-r66 kernel
- BeagleBoard-X15: v4.4.30-ti-r66 kernel
2016-10-06
- BeagleBoard xM: v4.8.0-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
- OMAP5432 uEVM: v4.4.23-ti-r51 kernel
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
2016-09-28
- BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
- OMAP5432 uEVM: v4.4.22-ti-r48 kernel
- BeagleBoard-X15: v4.4.22-ti-r48 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/elinux/debian-stretch-console-armhf-2016-11-10.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2016-11-10.tar.xz
d6004c8ee14afbb89ce2a28bbec0c462f69d1194db677c934f26d385087d8266  debian-stretch-console-armhf-2016-11-10.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2016-11-10.tar.xz
cd debian-stretch-console-armhf-2016-11-10

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2016-11-10
- BeagleBone Black/Green: v4.4.30-ti-r66 kernel
2016-10-06
- BeagleBone Black/Green: v4.4.23-ti-r51 kernel
2016-09-28
- BeagleBone Black/Green: v4.4.22-ti-r48 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb*
6e6c3adefdfa4d99206d5187996bffd3df7fec9a82cbd8adeec2094083f7cb49  BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2016-11-10
- BeagleBoard-X15: v4.4.30-ti-r66 kernel
2016-10-06
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
2016-09-28
- BeagleBoard-X15: v4.4.22-ti-r48 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb*
1b99b87ba2bcb1dfe1bd0b52fd99e7dd929912db1b86479d8ae299cf5b7c4c88  bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2016-11-10
- BeagleBoard xM: v4.8.7-armv7-x4 kernel
2016-10-06
- BeagleBoard xM: v4.8.0-armv7-x2 kernel
2016-09-28
- BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.6-console-armhf-2016-11-10-2gb*
a1af427af2edbff841d6b9a98771e4d087a50d8344c865a2046a5f883d441d2a  bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2016-11-10
- BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
2016-10-06
- BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
2016-09-28
- BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.6-console-armhf-2016-11-10-2gb*
722d224137285ef9992354d58d93e97e1c1a8398a40ac71ffd011e1d17a76481  bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2016-11-10
- OMAP5432 uEVM: v4.4.30-ti-r66 kernel
2016-10-06
- OMAP5432 uEVM: v4.4.23-ti-r51 kernel
2016-09-28
- OMAP5432 uEVM: v4.4.22-ti-r48 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/microsd/omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb*
3e56371a7789f2e640156b4ee9ec2fbc638341e61771dc44850f16c40912169d  omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2016-11-10
- BeagleBoard-X15: v4.4.30-ti-r66 kernel
2016-10-06
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
2016-09-28
- BeagleBoard-X15: v4.4.22-ti-r48 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.6-console-armhf-2016-11-10-2gb*
2365602326314f3fd2371aafa18204a703d28e4c4e95ee030e13f7b724191222  bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8

3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable

3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.1.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y

4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --stable

4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --stable

Mainline (lts)

4.1.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts

4.1.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts

Mainline

4.3.x BeagleBone/BeagleBone Black
--bone-kernel --testing

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

@@ Line 3: / Line 3: @@
 [[Category:Development Boards]]
 [[Category: BeagleBoard]]
-This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 = Help =
@@ Line 10: / Line 10: @@
 *Kernel related help:
-** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
-** Kernel Tree's
+** Kernel Trees
-*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.7.x Stable (3.7.x) branch]
+*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
+*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
@@ Line 21: / Line 22: @@
 ** pastebin dmesg
 *** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
+= Official BeagleBoard.org Images for shipping with BeagleBone Black =
+* http://beagleboard.org/source
 = Recommended Beagle Software =
@@ Line 32: / Line 36: @@
 Scripts:
-  git clone git://github.com/RobertCNelson/netinstall.git
+  git clone https://github.com/RobertCNelson/netinstall.git
   cd netinstall
 Device Options:
   BeagleBoard --dtb omap3-beagle
-  BeagleBoard xM --dtb omap3-beagle-xm
+  BeagleBoard-xM --dtb omap3-beagle-xm
+ BeagleBoard-X15 --dtb am57xx-beagle-x15
   BeagleBone (serial) --dtb am335x-bone-serial
   BeagleBone (video via cape) --dtb am335x-bone-video
   BeagleBone Black --dtb am335x-boneblack
-  PandaBoard --dtb omap4-panda
+  PandaBoard (A1->A3) --dtb omap4-panda
+ PandaBoard (A4->Ax) --dtb omap4-panda-a4
   PandaBoard ES  --dtb omap4-panda-es
 You will need a 1GB SD card or greater.
   Standard System : ~455MB
- + Desktop environment (GNOME) : ~2.9GB
-== Debian Wheezy ==
+== Debian 8 (jessie) ==
 Quick Install script for "board"
-  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 So For the BeagleBoard xM:
-  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb dt-beagleboard-xm --distro wheezy-armhf
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 *Options:
@@ Line 60: / Line 65: @@
 **--serial-mode : debian-installer uses Serial Port
+= Demo Image =
-= Demo Image =
+* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
+ git clone https://github.com/RobertCNelson/armv7-multiplatform.git
+ cd armv7-multiplatform
+ git checkout origin/v4.8.x -b tmp
+ ./build_kernel.sh
+* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
+ git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
+ cd ti-linux-kernel-dev
+ git checkout origin/ti-linux-4.4.y -b tmp
+ ./build_kernel.sh
-== Debian Stable (wheezy)  ==
+== Debian (jessie) ==
 Default username/password:
 *username: debian
 *password: temppwd
-Default root user/password
-*user: root
-*password: root
 Image Updated:
-*2014-01-24
+*2016-11-10
-** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
+** BeagleBoard xM: v4.8.7-armv7-x4 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+** BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
-*2013-12-17
+** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
-** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
+** BeagleBoard-X15: v4.4.30-ti-r66 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+*2016-10-06
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.8.0-armv7-x2 kernel
-*2013-11-15
+** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
-** Beagle xM (ONLY): v3.12.0-armv7-x8 kernel (--dtb dt-beagle-xm)
+** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone30 kernel
+** BeagleBoard-X15: v4.4.23-ti-r51 kernel
-*** audio/mmc fixes...
+*2016-09-28
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
+** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
+** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
+** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 Services Active:
-  Note: Depending on your internal network these may work out the box
+  Note: Depending on your internal network these may work out of the box
-  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
+  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
-  SSH, Port 22: ssh ubuntu@arm (Bone: via usb) ubuntu@192.168.7.2
+  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
   Getty, Serial Port
-Active on Boot Script:
+Default user: debian pass: temppwd
-*Disable by removing run_boot-scripts from small boot partition...*
- /opt/boot-scripts/<board>.sh
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.3-console-armhf-2014-01-24.tar.xz
+  wget https://rcn-ee.com/rootfs/2016-11-10/elinux/debian-8.6-console-armhf-2016-11-10.tar.xz
 Verify Image with:
-  md5sum debian-7.3-console-armhf-2014-01-24.tar.xz
+  sha256sum debian-8.6-console-armhf-2016-11-10.tar.xz
-a2221a3f5a46d69f45148401d9952a  debian-7.3-console-armhf-2014-01-24.tar.xz
+de938ed618aeb9eb6eebaad611a187d541570733e7065f36b535b21b2af28f  debian-8.6-console-armhf-2016-11-10.tar.xz
 Unpack Image:
-  tar xf debian-7.3-console-armhf-2014-01-24.tar.xz
+  tar xf debian-8.6-console-armhf-2016-11-10.tar.xz
-  cd debian-7.3-console-armhf-2014-01-24
+  cd debian-8.6-console-armhf-2016-11-10
-Install Image:
+If you don't know the location of your SD card:
+ sudo ./setup_sdcard.sh --probe-mmc
+You should see something like:
-Quick install script for [board]
+ Are you sure? I don't see [/dev/idontknow], here is what I do see...
-  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board
+  fdisk -l:
+ Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
+ Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
+ lsblk:
+ NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
+ sda      8:0    0 465.8G  0 disk
+ ├─sda1   8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
+ ├─sda2   8:2    0     1K  0 part
+ └─sda5   8:5    0  18.9G  0 part [SWAP]
+ sdd      8:48   1   3.7G  0 disk
+ ├─sdd1   8:49   1    64M  0 part
+ └─sdd2   8:50   1   3.6G  0 part
-[board] options:
+* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
-*BeagleBone/Black     - bone
-So for the BeagleBone:
+Install Image:
- sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone
-Quick install script for [board] (using new --dtb option)
+Quick install script for [board]
   sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 board options:
-*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
+*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
-*BeagleBoard xM             - omap3-beagle-xm
+*BeagleBoard xM                   - omap3-beagle-xm
+*BeagleBone White/Black/Green     - beaglebone
+*OMAP5432 uEVM                    - omap5-uevm
+*BeagleBoard-X15                  - am57xx-beagle-x15
 So for the BeagleBoard xM:
   sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
-== Debian Testing (jessie) ==
+Advanced: Build Image:
+ git clone https://github.com/RobertCNelson/omap-image-builder.git
+ cd omap-image-builder
+ git checkout v2016.11 -b tmp
+Stable:
+ ./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
+Testing:
+ ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
+== Debian Testing (stretch) ==
 Image Updated:
-*2014-01-24
+*2016-11-10
-** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
+** BeagleBoard xM: v4.8.7-armv7-x4 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+** BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
-*2013-12-17
+** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
-** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
+** BeagleBoard-X15: v4.4.30-ti-r66 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+*2016-10-06
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.8.0-armv7-x2 kernel
-*2013-11-15
+** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
-** Beagle xM (ONLY): v3.12.0-armv7-x8 kernel (--dtb dt-beagle-xm)
+** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone30 kernel
+** BeagleBoard-X15: v4.4.23-ti-r51 kernel
-*** audio/mmc fixes...
+*2016-09-28
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
+** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
+** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
+** BeagleBoard-X15: v4.4.22-ti-r48 kernel
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-01-24.tar.xz
+  wget https://rcn-ee.com/rootfs/2016-11-10/elinux/debian-stretch-console-armhf-2016-11-10.tar.xz
-Verify image with:
+Verify Image with:
-  md5sum debian-jessie-console-armhf-2014-01-24.tar.xz
+  sha256sum debian-stretch-console-armhf-2016-11-10.tar.xz
-bd42bef9484a48c54d076a878f  debian-jessie-console-armhf-2014-01-24.tar.xz
+  d6004c8ee14afbb89ce2a28bbec0c462f69d1194db677c934f26d385087d8266  debian-stretch-console-armhf-2016-11-10.tar.xz
 Unpack image:
-  tar xf debian-jessie-console-armhf-2014-01-24.tar.xz
+  tar xf debian-stretch-console-armhf-2016-11-10.tar.xz
-  cd debian-jessie-console-armhf-2014-01-24
+  cd debian-stretch-console-armhf-2016-11-10
-Then follow directions show above with the other images...
+Then follow the directions shown above with the other images...
 = Flasher =
-== eMMC: BeagleBone Black ==
+== eMMC: BeagleBone Black/Green ==
-This image can be written to a 2Gb (or greater) microSD card, via 'dd' in linux or the win32 image program linked to on CircuitCo's wiki page.  First hold down on the boot select button (next to microSD card) and apply power (same procedure as the official CircuitCo images), it should boot into debian and begin flashing the eMMC, once completed all 4 LED's should be full ON...  Simply remove power, remove microSDcard and Debian will now boot from eMMC.
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
-Reference: (this is the script that writes to the eMMC)
+Script for reference: (this is the script that writes to the eMMC)
-  https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-copy-microSD-to-eMMC.sh
+  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
-BTW: we are only writing about 500Mb's to the eMMC so the script will only take about 5-6 Minutes after power on.
+This script will only take about 5-6 Minutes after power on.
 Notes:
-* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Try with a 5Volt DC supply plugged in..
+* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
-* If the 4 LED's blink a constant pattern, eMMC write failed, first REMOVE ALL capes, then retry again.
+* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
-** (error -84: which may mean you've reached the max number of erase/write cycles...)
 User: debian
 pass: temppwd
-root: root/root
+Image Updated:
+*2016-11-10
+** BeagleBone Black/Green: v4.4.30-ti-r66 kernel
+*2016-10-06
+** BeagleBone Black/Green: v4.4.23-ti-r51 kernel
+*2016-09-28
+** BeagleBone Black/Green: v4.4.22-ti-r48 kernel
+Get prebuilt image:
+ wget https://rcn-ee.com/rootfs/2016-11-10/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+Verify Image with:
+ sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb*
+e6c3adefdfa4d99206d5187996bffd3df7fec9a82cbd8adeec2094083f7cb49  BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
+Windows/Mac/Linux gui
+ http://etcher.io
+Linux: (dd)
+ xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
+== eMMC: BeagleBoard-X15 ==
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
+Script for reference: (this is the script that writes to the eMMC)
+ https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
+This script will only take about 5-6 Minutes after power on.
+Notes:
+* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
+* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
+User: debian
+pass: temppwd
 Image Updated:
-*2014-01-24
+*2016-11-10
-** BeagleBone Black: v3.8.13-bone37 kernel
+** BeagleBoard-X15: v4.4.30-ti-r66 kernel
-*2013-12-17
+*2016-10-06
-** BeagleBone Black: v3.8.13-bone32 kernel
+** BeagleBoard-X15: v4.4.23-ti-r51 kernel
-*2013-11-15
+*2016-09-28
-** BeagleBone Black: v3.8.13-bone30 kernel
+** BeagleBoard-X15: v4.4.22-ti-r48 kernel
-*** ssh host key fixes (auto generated on bootup...)
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/flasher/wheezy/debian-jessie-console-armhf-2014-01-24-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2016-11-10/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
 Verify Image with:
-  md5sum debian-jessie-console-armhf-2014-01-24-2gb.img.xz
+  sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb*
-b88194ce6f1a8b06195a8168b21b2d9  debian-jessie-console-armhf-2014-01-24-2gb.img.xz
+b99b87ba2bcb1dfe1bd0b52fd99e7dd929912db1b86479d8ae299cf5b7c4c88  bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
-Follow the "standard" update procedure.
+Windows/Mac/Linux gui
-  http://circuitco.com/support/index.php?title=Updating_The_Software
+  http://etcher.io
-Linux:
+Linux: (dd)
-  unxz debian-jessie-console-armhf-2014-01-24-2gb.img.xz
+  xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
- sudo dd if=./debian-jessie-console-armhf-2014-01-24-2gb.img of=/dev/sdX
 = raw microSD img =
-== BeagleBone ==
+== BeagleBoard xM ==
-This image can be written to a 2Gb (or greater) microSD card, via 'dd' in linux or the win32 image program linked to on CircuitCo's wiki page.  First hold down on the boot select button (next to microSD card) and apply power (same procedure as the official CircuitCo images), it should boot into Debian.
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 User: debian
 pass: temppwd
-root: root/root
 Auto partition resize:
@@ Line 220: / Line 296: @@
 Image Updated:
-*2014-01-24
+*2016-11-10
-** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+** BeagleBoard xM: v4.8.7-armv7-x4 kernel
-*2013-12-17
+*2016-10-06
-** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+** BeagleBoard xM: v4.8.0-armv7-x2 kernel
+*2016-09-28
+** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.3-2014-01-24-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
 Verify Image with:
-  md5sum bone-debian-7.3-2014-01-24-2gb.img.xz
+  sha256sum bbxm-debian-8.6-console-armhf-2016-11-10-2gb*
-ed1d0f198f9ae49393ed39a7cad6a41  bone-debian-7.3-2014-01-24-2gb.img.xz
+  a1af427af2edbff841d6b9a98771e4d087a50d8344c865a2046a5f883d441d2a  bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
-Linux:
+Windows/Mac/Linux gui
-  unxz bone-debian-7.3-2014-01-24-2gb.img.zx
+  http://etcher.io
- sudo dd if=./bone-debian-7.3-2014-01-24-2gb.img of=/dev/sdX
-= Debian Configuration =
+Linux: (dd)
+ xzcat bbxm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
-== Serial Ports ==
+== BeagleBone White/Black/Green ==
-=== Wheezy ===
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
-To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
+User: debian
- T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
+pass: temppwd
-To start a console on the USB ACM device, add the following to /etc/inittab,
+Auto partition resize:
-  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
+ cd /opt/scripts/tools
+ git pull
+  ./grow_partition.sh
+ sudo reboot
-== SGX Video Acceleration ==
+Image Updated:
+*2016-11-10
+** BeagleBone White/Black/Green: v4.4.30-ti-r66 kernel
+*2016-10-06
+** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
+*2016-09-28
+** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
-=== SGX armel/armhf v3.4.x+ ===
+Get prebuilt image:
-* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
+ wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
-* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+Verify Image with:
+ sha256sum bone-debian-8.6-console-armhf-2016-11-10-2gb*
+d224137285ef9992354d58d93e97e1c1a8398a40ac71ffd011e1d17a76481  bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
-==== Re-Build Kernel and SGX Kernel Modules ====
+Windows/Mac/Linux gui
- git clone git://github.com/RobertCNelson/stable-kernel.git
+  http://etcher.io
-  cd stable-kernel
- git checkout origin/v3.7.x -b tmp
- ./build_kernel.sh (and then follow the directions as the script runs...)
-Build kernel
+Linux: (dd)
-  ./build_kernel.sh
+  xzcat bone-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
-Build SGX modules
+== OMAP5432 uEVM ==
- ./sgx_build_modules.sh
-Insert SD card, make sure to modify MMC in system.sh
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
- ./tools/install_image.sh
-Place SD card into the device and boot...
+User: debian
- cd /opt/sgx
+pass: temppwd
- sudo tar xf GFX_4.0*_libs.tar.gz
- sudo ./install-sgx.sh
-Reboot, check modules (lsmod):
+Auto partition resize:
-  Module                  Size  Used by
+  cd /opt/scripts/tools
-  bufferclass_ti          5727  0
+  git pull
-  omaplfb                11512  0
+  ./grow_partition.sh
-  pvrsrvkm              165208  2 bufferclass_ti,omaplfb
+  sudo reboot
-Blit Test:
+Image Updated:
- ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
+*2016-11-10
- ------------------ SGX 3D Blit test -----------------
+** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
- ----------------------- Start -----------------------
+*2016-10-06
- Call PVRSRVConnect with a valid argument:
+** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
-  OK
+*2016-09-28
- Get number of devices from PVRSRVEnumerateDevices:
+** OMAP5432 uEVM: v4.4.22-ti-r48 kernel
-  OK
- .... Reported 1 devices
- .... Device Number  | Device Type
-    | PVRSRV_DEVICE_ID_SGX
- Attempt to acquire device 0:
-  OK
- Getting SGX Client info
-  OK
- .... ui32ProcessID:1133
- Display Class API: enumerate devices
-  OK
- PVRSRVEnumerateDeviceClass() returns 1 display device(s)
-  OK
- Display Class API: open device
-  OK
- Display Class API: Get display info
-  OK
- .... Name:PowerVR OMAP Linux Display Driver
- .... MaxSwapChains:1
- .... MaxSwapChainBuffers:1
- .... MinSwapInterval:0
- .... MaxSwapInterval:1
- Display Class API: enumerate display formats
-  OK
-  OK
- .... Display format 0 - Pixelformat:1
- Display Class API: enumerate display dimensions
-  OK
-  OK
- .... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
- Attempt to create memory context for SGX:
-  OK
- .... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
- .... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
- .... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
- .... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
- .... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
- .... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
- .... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
- .... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
- .... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
- .... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
- .... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
- Display Class API: get the system (primary) buffer
-  OK
- Display Class API: map display surface to SGX
-  OK
- Attempt to create transfer context for SGX:
-  OK
- Do a SRCCOPY blit to the bottom right quadrant of the display:
- (bottom right quadrant should be red on blue background):
-  OK
-  OK
- Do a SRCCOPY blit to the top left quadrant of the display:
- (top left quadrant should be striped (r/g/b/w) on blue background):
-  OK
-  OK
- Do a CUSTOMSHADER blit to the top right quadrant of the display:
- (top right quadrant should be yellow):
-xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
-xb6acb000 (host) 0xf408000 (device): Device mem for texture
- USE custom shader program: 0x28841001.c0000000	mov.end o0, sa0
-  OK
- Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
- and then present the RGB565 to the bottom right quadrant of the screen
- (bottom right quadrant should be a red gradient):
-  OK
-  OK
-  OK
-  OK
- Free the off screen surfaces:
-  OK
-  OK
-  OK
-  OK
- Destroy the transfer context:
-  OK
- Display Class API: unmap display surface from SGX
-  OK
- Destroy Device Memory Context
- Display Class API: close the device
-  OK
- Release SGX Client Info:
-  OK
- Disconnect from services:
-  OK
- ------------------ SGX 3D Blit test -----------------
- ------------------------ End ------------------------
-=== SGX Legacy armel only upto v3.2.x ===
+Get prebuilt image:
-NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
+ wget https://rcn-ee.com/rootfs/2016-11-10/microsd/omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
-Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
+Verify Image with:
-  https://github.com/RobertCNelson/stable-kernel
+ sha256sum omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb*
+e56371a7789f2e640156b4ee9ec2fbc638341e61771dc44850f16c40912169d  omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
-Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
+Windows/Mac/Linux gui
- https://github.com/RobertCNelson/stable-kernel/issues/8
+  http://etcher.io
-  oneiric:
- wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
- /bin/bash install-me.sh
-==== SDK unPackage Script ====
+Linux: (dd)
+ xzcat omap5-uevm-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
-Download the latest version of the "create_sgx_package.sh" script
+== BeagleBoard-X15 ==
-.6.37
- wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
-.6.38->3.2.x
- wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
-Make script executable
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
- chmod a+x ./create_sgx_package_*.sh
-Run script
+User: debian
- ./create_sgx_package_*.sh
+pass: temppwd
-After Successfully running:
+Auto partition resize:
+  cd /opt/scripts/tools
-  :~/temp$ ls
+  git pull
- create_sgx_package.sh
+  ./grow_partition.sh
- GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
-  GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
- Graphics_SDK_setuplinux_X_XX_XX_XX.bin
- SDK
- SDK_BIN
-==== Beagle: GFX_*_libs.tar.gz ====
- tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
-  ./install-SGX.sh (copies necessary SGX libs and startup script)
- ./run-SGX.sh (force run the new init script, or you can just reboot...)
-On successful install:
- Stopping PVR
- Starting PVR
- Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
-Reboot for good measure
   sudo reboot
-==== Beagle: GFX_Linux_SDK.tar.gz ====
+Image Updated:
+*2016-11-10
+** BeagleBoard-X15: v4.4.30-ti-r66 kernel
+*2016-10-06
+** BeagleBoard-X15: v4.4.23-ti-r51 kernel
+*2016-09-28
+** BeagleBoard-X15: v4.4.22-ti-r48 kernel
-  tar xf GFX_Linux_SDK.tar.gz
+Get prebuilt image:
- cd GFX_Linux_SDK
+  wget https://rcn-ee.com/rootfs/2016-11-10/microsd/bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
- tar xf OGLES.tar.gz
-==== Test SGX with a DEMO ====
+Verify Image with:
+ sha256sum bbx15-debian-8.6-console-armhf-2016-11-10-2gb*
+ 2365602326314f3fd2371aafa18204a703d28e4c4e95ee030e13f7b724191222  bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz
- cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+Windows/Mac/Linux gui
- ./OGLESEvilSkull
+ http://etcher.io
-==== Trouble Shooting ====
+Linux: (dd)
+ xzcat bbx15-debian-8.6-console-armhf-2016-11-10-2gb.img.xz | sudo dd of=/dev/sdX
- sudo rm /etc/powervr-esrev
+= Debian Configuration =
- sudo depmod -a omaplfb
- sudo /etc/init.d/pvr restart
-== DSP ==
+==Install Latest Kernel Image==
-=== gst-dsp ===
+General apt syntax for searching and installing a specific kernel:
-*Note: This section is BeagleBoard(-xM) only since the BeagleBone (Black) doesn't have a DSP.
+ sudo apt-get update
+ sudo apt-cache search linux-image | grep <branch>
+ sudo apt-get install linux-image-<specific version>
+ sudo reboot
-The following Gstreamer elements will be installed:
+Latest kernel script
+ cd /opt/scripts/tools/
+ git pull
+ sudo ./update_kernel.sh <OPTIONS>
-  $ gst-inspect | grep dsp
+== 3.8.x ==
-  dvdspu:  dvdspu: Sub-picture Overlay
+This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
-  dsp:  dspdummy: DSP dummy element
+  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
-  dsp:  dspvdec: DSP video decoder
-  dsp:  dspadec: DSP audio decoder
-  dsp:  dsph263enc: DSP video encoder
-  dsp:  dspmp4venc: DSP MPEG-4 video encoder
-  dsp:  dspjpegenc: DSP video encoder
-  dsp:  dsph264enc: DSP video encoder
-  dsp:  dspvpp: DSP VPP filter
-  dsp:  dspipp: DSP IPP
-Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
+.8.x BeagleBone/BeagleBone Black FULL Cape Support
+ --bone-channel --stable
-Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
+.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
-  ubuntu@arm:~$ zcat /proc/config.gz | grep TIDSP
+  --bone-xenomai-channel --stable
- CONFIG_TIDSPBRIDGE=m
- CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
- CONFIG_TIDSPBRIDGE_RECOVERY=y
- # CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
- # CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
- # CONFIG_TIDSPBRIDGE_BACKTRACE is not set
-On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
+== 4.1.x-ti ==
+This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
+ beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
+ Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
-Download the latest version of the "create_dsp_package.sh" script
+.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
-  wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_dsp_package.sh
+ --ti-channel --stable
-Make script executable
+.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
-  chmod a+x ./create_dsp_package.sh
+ --ti-rt-channel --stable
-Package script:
+== Mainline (lts) ==
- ./create_dsp_package.sh
-Copy DSP_Install_libs.tar.gz to Beagle
+.1.x BeagleBone/BeagleBone Black + SGX
+ --bone-kernel --lts
-Setup network...
+.1.x BeagleBone/BeagleBone Black + RT + SGX
+ --bone-rt-kernel --lts
-Extract:
+== Mainline ==
-  ubuntu@arm:~$ tar xf DSP_Install_libs.tar.gz
+.3.x BeagleBone/BeagleBone Black
+ --bone-kernel --testing
-Install:
+== Debian 8: jessie ==
-  ubuntu@arm:~$ ./install-DSP.sh
+  sudo apt-get install linux-image-armmp
-What got installed:
+Reboot with your new Kernel Image.
- ubuntu@arm:~$ ls -lh /lib/dsp/
- total 7.1M
- -rwxr-xr-x 1 root root 1.3M Dec  3 10:56 baseimage.dof
- -rwxr-xr-x 1 root root  51K Dec  3 10:56 conversions.dll64P
- -rwxr-xr-x 1 root root  13K Dec  3 10:56 dctn_dyn.dll64P
- -rwxr-xr-x 1 root root 2.5M Dec  3 10:56 h264vdec_sn.dll64P
- -rwxr-xr-x 1 root root 481K Dec  3 10:56 jpegdec_sn.dll64P
- -rwxr-xr-x 1 root root 229K Dec  3 10:56 jpegenc_sn.dll64P
- -rwxr-xr-x 1 root root 767K Dec  3 10:56 m4venc_sn.dll64P
- -rwxr-xr-x 1 root root 890K Dec  3 10:56 mp4vdec_sn.dll64P
- -rwxr-xr-x 1 root root 707K Dec  3 10:56 mpeg4aacdec_sn.dll64P
- -rwxr-xr-x 1 root root  15K Dec  3 10:56 qosdyn_3430.dll64P
- -rwxr-xr-x 1 root root  14K Dec  3 10:56 ringio.dll64P
- -rwxr-xr-x 1 root root 9.1K Dec  3 10:56 TSPA_Object_Code_Software_License_Agreement.txt
- -rwxr-xr-x 1 root root  53K Dec  3 10:56 usn.dll64P
- -rwxr-xr-x 1 root root 245K Dec  3 10:56 vpp_sn.dll64P
-Building gst-dsp stuff:
+== Xorg Drivers ==
-If you installed this image via the demo images or netinstall, the gst-dsp build script is installed:
+Script:
+ cd /opt/scripts/tools/
+ git pull
-Update arm tools directory to the latest:
+BeagleBoard/PandaBoard:
-  ubuntu@arm:~$ cd /boot/uboot/tools/
+  cd /opt/scripts/tools/graphics/
-  ubuntu@arm:/boot/uboot/tools$ sudo ./update.sh
+  ./ti-omapdrm.sh
-Otherwise, install via git:
+BeagleBone/BeagleBone Black:
-  git clone git://github.com/RobertCNelson/tools.git
+  cd /opt/scripts/tools/graphics/
+ ./ti-tilcdc.sh
-Change to the pkgs directory
+== SGX Drivers ==
- ubuntu@arm:~$ cd /boot/uboot/tools/pkgs
- (or if just cloned)
- ubuntu@arm:~$ cd ~/tools/pkgs
-Build gst-dsp stuff..
+=== SGX BeagleBone/BeagleBone Black ===
- ./ti-tidspbridge.sh
-Start dspbridge (or just reboot)
+Note, these are FBDEV only, no xorg/x11/etc...
- sudo /etc/init.d/dsp_init start
-Test dspbridge
+Install the "4.1.x" lts/bone kernel:
- sudo dsp-test
+http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
-Playbin:
+Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
-  sudo gst-launch playbin2 uri=file://(file)
+ git clone https://github.com/RobertCNelson/bb-kernel.git
+  cd bb-kernel/
+ git checkout origin/am33x-v4.1 -b tmp-sgx
+ ./sgx_create_package.sh
-Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
+Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
-  Note: it seems broken in Ubuntu precise armhf...
+ sudo tar xfv GFX_5.01.01.02.tar.gz -C /
+ cd /opt/gfxinstall/
+  sudo ./sgx-install.sh
+ sudo reboot
-  sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
+Verify omaplfb & pvrsrvkm loaded
+  debian@arm:~$ lsmod | grep omaplfb
+ omaplfb                12065  0
+ pvrsrvkm              178782  1 omaplfb
-== Building Kernel ==
+= Building Kernel =
 Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
-=== Beagle/Beagle xM ===
+== Beagle/Beagle xM ==
   http://eewiki.net/display/linuxonarm/BeagleBoard
-=== BeagleBone ===
+== BeagleBone ==
   http://eewiki.net/display/linuxonarm/BeagleBone
-=== BeagleBone Black ===
+== BeagleBone Black ==
   http://eewiki.net/display/linuxonarm/BeagleBone+Black
-=== Panda/Panda ES ===
+== Panda/Panda ES ==
   http://eewiki.net/display/linuxonarm/PandaBoard

Difference between revisions of "BeagleBoardDebian"

Revision as of 10:40, 11 November 2016

Contents

Help

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Debian NetInstall

Debian 8 (jessie)

Demo Image

Debian (jessie)

Debian Testing (stretch)

Flasher

eMMC: BeagleBone Black/Green

eMMC: BeagleBoard-X15

raw microSD img

BeagleBoard xM

BeagleBone White/Black/Green

OMAP5432 uEVM

BeagleBoard-X15

Debian Configuration

Install Latest Kernel Image

3.8.x

4.1.x-ti

Mainline (lts)

Mainline

Debian 8: jessie

Xorg Drivers

SGX Drivers

SGX BeagleBone/BeagleBone Black

Building Kernel

Beagle/Beagle xM

BeagleBone

BeagleBone Black

Panda/Panda ES

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Navigation menu

Search