Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Linux Kernel: Updated MAKEFLAGS for make-kpkg)
m (Mainline (4.9.x lts))
(522 intermediate revisions by 32 users not shown)
Line 1: Line 1:
 
[[Category: Linux]]
 
[[Category: Linux]]
 
[[Category: OMAP]]
 
[[Category: OMAP]]
 +
[[Category:Development Boards]]
 +
[[Category: BeagleBoard]]
 +
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
= Help =
  
= QEMU =
+
If you need any help:
  
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
+
*Kernel related help:
apt-get install qemu
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
+
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 +
** Kernel Trees
 +
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
==Format SD Card==
+
*When asking for help, please provide some debugging information:
 +
** U-Boot Version installed on board
 +
** Kernel Version: uname -a
 +
** pastebin dmesg
 +
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
  
You need a SD card 1GB or greater.
+
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
Currently (Aug 15, 2008) ext2load doesn't seem to work in the current u-boot beagle board git repo. For the moment follow the [http://code.google.com/p/beagleboard/wiki/LinuxBootDiskFormat LinuxBootDisk guide] to setup a 50-100MB FAT partition on your SD Card to use u-boot's fatload.
+
= Recommended Beagle Software =
  
For reference, this is a 2GB sd card after installing Debian:
+
Mainline U-Boot:
 +
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
  Disk /dev/sde: 2032 MB, 2032664576 bytes
+
= Debian NetInstall =
  255 heads, 63 sectors/track, 247 cylinders
+
 
  Units = cylinders of 16065 * 512 = 8225280 bytes
+
Scripts:
  Disk identifier: 0x000ab123
+
  git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
 +
 
 +
You will need a 1GB SD card or greater.
 +
Standard System : ~455MB
 +
 
 +
== Debian 8 (jessie) ==
 +
 
 +
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 +
 
 +
So For the BeagleBoard xM:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 +
 
 +
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
 +
 
 +
= Demo Image =
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.9.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.4.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 +
*2016-11-10
 +
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 +
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 +
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 +
*2016-10-06
 +
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 +
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
 +
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 +
 
 +
Services Active:
 +
  Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
 +
 
 +
Default user: debian pass: temppwd
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-8.6-console-armhf-2017-01-13.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-8.6-console-armhf-2017-01-13.tar.xz
 +
cda6642635dd2c13d3583f571dcf22c993c21904749e192344af824f368893b4  debian-8.6-console-armhf-2017-01-13.tar.xz
 +
 
 +
Unpack Image:
 +
tar xf debian-8.6-console-armhf-2017-01-13.tar.xz
 +
  cd debian-8.6-console-armhf-2017-01-13
 +
 
 +
If you don't know the location of your SD card:
 +
  sudo ./setup_sdcard.sh --probe-mmc
 +
 
 +
You should see something like:
 +
 
 +
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
   
 
   
   Device Boot     Start        End      Blocks   Id System
+
fdisk -l:
  /dev/sde1              1          6      48163+  6 FAT16
+
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
  /dev/sde2 *           7         228    1783215  83 Linux
+
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
  /dev/sde3            229        247      152617+  Extended
+
  /dev/sde5            229        247      152586  82 Linux swap / Solaris
+
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5   0  18.9G  0 part [SWAP]
 +
sdd     8:48  1   3.7G 0 disk
 +
  ├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 +
 
 +
Install Image:
 +
 
 +
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Varients          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2017.01 -b tmp
 +
 
 +
Stable:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
 +
 
 +
Testing:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 +
 
 +
== Debian Testing (stretch) ==
 +
 
 +
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 +
*2016-11-10
 +
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 +
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 +
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 +
*2016-10-06
 +
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 +
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
 +
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-stretch-console-armhf-2017-01-13.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-stretch-console-armhf-2017-01-13.tar.xz
 +
66dff071128748517dfe4ffe4da9f529b279104eb32047d55b5bee8fd00be0ab  debian-stretch-console-armhf-2017-01-13.tar.xz
 +
 
 +
Unpack image:
 +
tar xf debian-stretch-console-armhf-2017-01-13.tar.xz
 +
cd debian-stretch-console-armhf-2017-01-13
 +
 
 +
Then follow the directions shown above with the other images...
 +
 
 +
= Flasher =
 +
 
 +
== eMMC: All BeagleBone Varients with eMMC ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Image Updated:
 +
*2017-01-13
 +
** All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
 +
*2016-11-10
 +
** All BeagleBone Varients with eMMC: v4.4.30-ti-r66 kernel
 +
*2016-10-06
 +
** All BeagleBone Varients with eMMC: v4.4.23-ti-r51 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2017-01-13/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
 +
  5421a6a4cd9107ef5323c91bc41cef22383a5e1c4fa7ba6c54be6373e6fdc9cf  BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
  http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== eMMC: BeagleBoard-X15 ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
==Preparation==
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
To stay organized create working directory.
+
This script will only take about 5-6 Minutes after power on.
  
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
+
Notes:
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.24-1-versatile
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
 +
User: debian
 +
pass: temppwd
  
==Install Debian==
+
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 +
*2016-11-10
 +
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 +
*2016-10-06
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
  
To install (ARM EABI) Debian inside QEMU:
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-01-13/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.24-1-versatile -initrd initrd.gz -m 256 -hda /dev/sde --append "root=/dev/ram mem=256M"
+
Verify Image with:
Note: sudo access is required to access /dev/sde directly.
+
  sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
 +
f1ff6ca3fb329dd060079f3814cfc3fa9d12f6a3cf8cc3937b4dc2318d1b60d2  bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
  
 +
Windows/Mac/Linux gui
 +
http://etcher.io
  
==Running Debian==
+
Linux: (dd)
 +
xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
  
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.24-1-versatile -m 256 -hda /dev/sde -append "root=/dev/sda2 mem=256M"
+
= raw microSD img =
  
Note: Time will be incorrect.
+
== BeagleBoard xM ==
  
login as root, change password
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
apt-get install ntpdate
 
ntpdate pool.ntp.org
 
reboot.. relogin change password...
 
  
Install default deb packages for linux-image & linux-headers
+
User: debian
   
+
pass: temppwd
  wget ..(currently building)
+
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
*2016-11-10
 +
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 +
*2016-10-06
 +
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum bbxm-debian-8.6-console-armhf-2017-01-13-2gb*
 +
525e09fed668831d500d9ed63beedd0d2080b6457df76000bf5bb280d1f6996a  bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== All BeagleBone Varients ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2017-01-13
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
*2016-11-10
 +
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 +
*2016-10-06
 +
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum bone-debian-8.6-console-armhf-2017-01-13-2gb*
 +
0d3261f95032299ee507a3ee81cd5b78b84ebf469ee52cf7b9071b2c7090987f  bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== OMAP5432 uEVM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2017-01-13
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
*2016-11-10
 +
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 +
*2016-10-06
 +
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-01-13/microsd/omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb*
 +
a772986cf1e6d6bc8f6301a1bf25659333a6136f4e9b2a95519cac25ea3a6222  omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== BeagleBoard-X15 ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 +
*2016-11-10
 +
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 +
*2016-10-06
 +
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum bbx15-debian-8.6-console-armhf-2017-01-13-2gb*
 +
3191816151274d6574f73efe5a719699e7797108bf6cd9a2b8e4fc574f663d8b  bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
= Debian Configuration =
 +
 
 +
==Install Latest Kernel Image==
 +
 
 +
General apt syntax for searching and installing a specific kernel:
 +
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
sudo reboot
 +
 
 +
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
 +
 
 +
== 3.8.x ==
 +
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
 +
 
 +
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
 +
--bone-channel --stable
 +
 
 +
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
 +
--bone-xenomai-channel --stable
 +
 
 +
== 4.4.x-ti ==
 +
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
 +
 
 +
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
 +
--ti-channel --lts-4_4
 +
 
 +
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_4
 +
 
 +
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
 +
--ti-xenomai-channel --lts-4_4
  
Stop QEMU and remount SD card to copy uImage to FAT partition:
+
== Mainline (4.4.x lts) ==
  
  cd /media/disk-1/
+
  4.4.x BeagleBone/BeagleBone Black + SGX
  wget http://www.rcn-ee.com/code/beagle/debian/lenny/Linux-2.6.22.18-omap3/gcc-4.2/uImage
+
  --bone-kernel --lts-4_4
  
=Beagleboard=
+
4.4.x BeagleBone/BeagleBone Black + RT + SGX
 +
--bone-rt-kernel --lts-4_4
  
Insert SD Card and power up Beagleboard.
+
== Mainline (4.9.x lts) ==
  
==Boot==
+
4.9.x BeagleBone/BeagleBone Black
 +
--bone-kernel --lts-4_9
  
Using a serial program, stop u-boot and add these commands:
+
4.9.x BeagleBone/BeagleBone Black + RT
 +
--bone-rt-kernel --lts-4_9
  
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
== Debian 8: jessie ==
setenv bootargs 'console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 rw rootdelay=5 nohz=off'
+
  sudo apt-get install linux-image-armmp
  boot
 
  
To force the Beagleboard to always boot the sd card image:
+
Reboot with your new Kernel Image.
  
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
== Xorg Drivers ==
setenv bootargs 'console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 rw rootdelay=5 nohz=off'
 
saveenv
 
boot
 
  
Note: 'rootwait' only works with newer kernels, for 2.6.22.18-omap3 use 'rootdelay=5', otherwise this error:
+
Script:
VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0)
+
  cd /opt/scripts/tools/
Please append a correct "root=" boot option; here are the available partitions:
+
  git pull
1f00        512 mtdblock01f00        512 mtdblock0 (driver?)
 
1f01      1920 mtdblock11f01      1920 mtdblock1 (driver?)
 
1f02        128 mtdblock21f02        128 mtdblock2 (driver?)
 
  1f03      5120 mtdblock31f03      5120 mtdblock3 (driver?)
 
  1f04    254464 mtdblock41f04    254464 mtdblock4 (driver?)
 
  
 +
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
==Debian on Beagleboard==
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
Debian on BeagleBoard uses the following configuration:
+
== SGX Drivers ==
  
* Console log = Serial Terminal
+
=== SGX BeagleBone/BeagleBone Black ===
* User Console = HDMI port + usb (keyboard,etc)
 
  
=Current Issues=
+
Note, these are FBDEV only, no xorg/x11/etc...
  
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
+
Install the "4.1.x" lts/bone kernel:
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue date MMDDHHMMYYYY
+
http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
  
=Building a Native Debian Kernel with QEMU=
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
==Install Dependencies==
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
   
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
  apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev
+
  cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
==u-boot==
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
wget -nc http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
+
= Building Kernel =
tar -xf u-boot_beagle_revb.tar.gz
 
cd u-boot/
 
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3530beagle_config
 
make CROSS_COMPILE=  
 
  
Note: this should eventually error out. The goal isn't to build a native u-boot but just the u-boot's 'mkimage' such that a u-boot compatible uImage can be build later.
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
Add /tools/ to $PATH
+
== Beagle/Beagle xM ==
  PATH=/home/<user>/u-boot/tools:"${PATH}"
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
  
==Linux Kernel==
+
== BeagleBone ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone
  
wget -nc http://www.beagleboard.org/uploads/2.6_kernel_revb-v2.tar.gz
+
== BeagleBone Black ==
  wget -nc http://www.rcn-ee.com/code/beagle/debian/lenny/2.6_kernel_revb-v2-debian-gcc-4.3.1-armel-v1.patch
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
tar -xf 2.6_kernel_revb-v2.tar.gz
 
  
Patch Kernel
+
== Panda/Panda ES ==
  cd 2.6_kernel/
+
  http://eewiki.net/display/linuxonarm/PandaBoard
patch -p1 < ../2.6_kernel_revb-v2-debian-gcc-4.3.1-armel-v1.patch
 
  
Setup Kernel .config
+
= Upgrading from Debian 5 to Debian 6 =
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3_beagle_defconfig
 
  
Create Debian linux-image* & linux-headers* Package
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
make-kpkg clean
 
CONCURRENCY_LEVEL=1 MAKEFLAGS="CROSS_COMPILE= " fakeroot make-kpkg --initrd kernel_image kernel_headers
 
  
Create U-boot uImage
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
make CROSS_COMPILE= uImage
 
  
Issues:
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
Debian's gcc-4.3 will fail to build a bootable uImage, so use gcc-4.2 as gcc thru 'update-alternatives'
 
  
==Successfully Built Images==
+
sudo apt-get update ; sudo apt-get upgrade
[http://www.rcn-ee.com/code/beagle/debian/lenny/Linux-2.6.22.18-omap3/gcc-4.2/ Example Debian Kernel Images]
+
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 13:59, 13 January 2017

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.9.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard xM: v4.8.7-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.30-ti-r66 kernel
    • OMAP5432 uEVM: v4.4.30-ti-r66 kernel
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel
    • All BeagleBone Varients: v4.4.23-ti-r51 kernel
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-8.6-console-armhf-2017-01-13.tar.xz

Verify Image with:

sha256sum debian-8.6-console-armhf-2017-01-13.tar.xz
cda6642635dd2c13d3583f571dcf22c993c21904749e192344af824f368893b4  debian-8.6-console-armhf-2017-01-13.tar.xz

Unpack Image:

tar xf debian-8.6-console-armhf-2017-01-13.tar.xz
cd debian-8.6-console-armhf-2017-01-13

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.01 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard xM: v4.8.7-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.30-ti-r66 kernel
    • OMAP5432 uEVM: v4.4.30-ti-r66 kernel
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel
    • All BeagleBone Varients: v4.4.23-ti-r51 kernel
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/elinux/debian-stretch-console-armhf-2017-01-13.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2017-01-13.tar.xz
66dff071128748517dfe4ffe4da9f529b279104eb32047d55b5bee8fd00be0ab  debian-stretch-console-armhf-2017-01-13.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2017-01-13.tar.xz
cd debian-stretch-console-armhf-2017-01-13

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-01-13
    • All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • All BeagleBone Varients with eMMC: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • All BeagleBone Varients with eMMC: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
5421a6a4cd9107ef5323c91bc41cef22383a5e1c4fa7ba6c54be6373e6fdc9cf  BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb*
f1ff6ca3fb329dd060079f3814cfc3fa9d12f6a3cf8cc3937b4dc2318d1b60d2  bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
  • 2016-11-10
    • BeagleBoard xM: v4.8.7-armv7-x4 kernel
  • 2016-10-06
    • BeagleBoard xM: v4.8.0-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.6-console-armhf-2017-01-13-2gb*
525e09fed668831d500d9ed63beedd0d2080b6457df76000bf5bb280d1f6996a  bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • All BeagleBone Varients: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • All BeagleBone Varients: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.6-console-armhf-2017-01-13-2gb*
0d3261f95032299ee507a3ee81cd5b78b84ebf469ee52cf7b9071b2c7090987f  bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • OMAP5432 uEVM: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • OMAP5432 uEVM: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb*
a772986cf1e6d6bc8f6301a1bf25659333a6136f4e9b2a95519cac25ea3a6222  omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel
  • 2016-11-10
    • BeagleBoard-X15: v4.4.30-ti-r66 kernel
  • 2016-10-06
    • BeagleBoard-X15: v4.4.23-ti-r51 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.6-console-armhf-2017-01-13-2gb*
3191816151274d6574f73efe5a719699e7797108bf6cd9a2b8e4fc574f663d8b  bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.6-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_4

Mainline (4.4.x lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_9

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade