Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Recommended Beagle Software: update X-loader and U-boot)
m (2017-03-09)
(243 intermediate revisions by 15 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
** Kernel Trees
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Launchpad Stable Kernel 2.6.32 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-dev Launchpad Development Kernel 2.6.32 src]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-mainline Launchpad Mainline Kernel git src] *Unless you know what your doing, do NOT use the 2.6-mainline branch...
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
** [http://elinux.org/BeagleBoardUbuntuKernel Kernel Testing Results]
 
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 25: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
* Recent x-loader/MLO (1.4.4ss)
 
** All Bx C2/3/4 Boards should upgrade there MLO from here: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-boot]
 
  
* Recent U-Boot (2010.03-rc1)
+
Mainline U-Boot:
** u-boot.bin from here: http://www.angstrom-distribution.org/beagleboard-demo-image-available
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
** Or this one I've archived: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-boot]
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
*** Version 2009.01 (factory installed on C2/3's) and earlier will not work with this guide
+
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
*** Version 2009.11-rc1-00601-g3aa4b51 (factory installed on C4's) should be upgraded
 
*** 'mmc init' change [http://git.denx.de/?p=u-boot.git;a=commit;h=a85693b3bd4431b05b7df608b6f7733c0f80c53e]
 
  
= Native Net Install =  
+
= Debian NetInstall =  
  
==Development PC: Format SD Card==
+
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
Starting with an empty SD card and using gparted, create:
+
== Debian 8 (jessie) ==
  50 MiB Primary Partition, fat32
+
 
  Leave remaining space for the Debian-Installer
+
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 +
 
 +
So For the BeagleBoard xM:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 +
 
 +
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
 +
 
 +
= Demo Image =
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.9.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.4.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
 +
 
 +
Default user: debian pass: temppwd
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-8.7-console-armhf-2017-03-09.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-8.7-console-armhf-2017-03-09.tar.xz
 +
80756ca1ab2c7cbbd38e1ff360ef66425ffdbec1ad3519702b53ab0b894e26a1  debian-8.7-console-armhf-2017-03-09.tar.xz
 +
 
 +
Unpack Image:
 +
tar xf debian-8.7-console-armhf-2017-03-09.tar.xz
 +
cd debian-8.7-console-armhf-2017-03-09
 +
 
 +
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
 +
 
 +
You should see something like:
 +
 
 +
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
  ├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50   1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 +
 
 +
Install Image:
 +
 
 +
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Varients          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2017.03 -b tmp
  
==Development PC: Setup SD U-boot Partition==
+
Stable:
  
Mount your SD card fat32 partition. (/media/disk/)
+
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
  
Debian Lenny Stable
+
Testing:
cd /media/disk/
 
sudo wget http://rcn-ee.net/deb/kernel/CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage
 
sudo wget http://ftp.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
sudo mv CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage uImage
 
sudo gzip -d initrd.gz
 
sudo dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
  
Debian Squeeze (Testing Release Summer 2010?)
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
  cd /media/disk/
 
sudo wget http://rcn-ee.net/deb/kernel/CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage (Note :1)
 
sudo wget http://ftp.debian.org/debian/dists/squeeze/main/installer-armel/current/images/versatile/netboot/initrd.gz (Note :2)
 
sudo mv CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage uImage
 
sudo gzip -d initrd.gz
 
sudo dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
  
1: Planning on a 2.6.32/33 kernel with xm support...
+
== Debian Testing (stretch) ==
2: Users on irc have mentioned it was working, haven't tested it personally..
 
  
Create U-boot boot script for netinstall:
+
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
  
Debian Install over DVI Port
+
Get prebuilt image:
sudo nano netinstall.cmd
+
  wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-stretch-console-armhf-2017-03-09.tar.xz
  setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
 
setenv bootargs 'console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M omapfb.mode=dvi:1280x720MR-16@60'
 
boot
 
  
Debian Install over the Serial Port
+
Verify Image with:
  sudo nano netinstall.cmd
+
  sha256sum debian-stretch-console-armhf-2017-03-09.tar.xz
  setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+
  e827a6f8843a3985b8d26150168e4fa433fb190ec596451113552cbcc8c4b2cf debian-stretch-console-armhf-2017-03-09.tar.xz
  setenv bootargs 'console=ttyS2,115200n8 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M'
 
boot
 
  
Create U-boot *.scr file:
+
Unpack image:
 +
tar xf debian-stretch-console-armhf-2017-03-09.tar.xz
 +
cd debian-stretch-console-armhf-2017-03-09
  
sudo mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./netinstall.cmd ./boot.scr
+
Then follow the directions shown above with the other images...
  
Sync and Unmount your mmc card and boot the beagle, it should find the 'boot.scr' file on your first partition while booting.
+
= Flasher =
  
==Beagleboard: netinstall==
+
== eMMC: All BeagleBone Varients with eMMC ==
  
  Choose a language
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  C - No localization
 
  English - English
 
  
Configure the network:
+
Script for reference: (this is the script that writes to the eMMC)
  usb0: USB net <- See below for 2.6.29. Could not find usb0 with B7 installing 2.6.28.
+
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
Configuring usb0 network bridge for 2.6.29:
+
This script will only take about 5-6 Minutes after power on.
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
 
  # ifconfig ethX 0.0.0.0
 
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
Continue the install without loading kernel modules? : <yes>
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
User: debian
  Logical Volume Manager not available: <Continue>
+
pass: temppwd
  
Partition disks:
+
Image Updated:
  Guided - Use the largest continuous free space
+
*2017-03-09
 +
** All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
  
  Partitioning scheme....
+
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2017-03-09/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
Example:
+
Verify Image with:
  MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
+
  sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
  > #1 primary  57.5 MB    fat32
+
  34a3f2c9147fa6a5fefae831d4bf0a74b744e4993a66b45e488829bba72ba0eb BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
  No installable kernel was found in the defined APT sources? :
+
Windows/Mac/Linux gui
  Continue without installing a kernel? : <yes>
+
  http://etcher.io
  
  Standard System
+
Linux: (dd)
 +
  xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
No BootLoader: <ok>
+
== eMMC: BeagleBoard-X15 ==
  
==Development PC: Setup U-boot for Normal Boot==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
Create a U-boot normal boot script:
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
DVI Port
+
This script will only take about 5-6 Minutes after power on.
sudo nano normal.cmd
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
 
boot
 
  
Serial Port
+
Notes:
sudo nano normal.cmd
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
 
boot
 
  
Create U-boot *.scr file:
+
User: debian
 +
pass: temppwd
  
sudo mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Debian Lenny" -d ./normal.cmd ./boot.scr
+
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
  
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
==Beagleboard: install kernel-image==
+
Verify Image with:
 +
sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
 +
66a1c3ca2f3b4a00c74e8f626a8d574093226747d9ec25255254c4f0ce798573  bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
===Script File===
+
Windows/Mac/Linux gui
Every Kernel upload going further on rcn-ee.net will now have an 'install-me.sh' file in the same directory..
+
http://etcher.io
  
  example: http://www.rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.6-x6.2/
+
Linux: (dd)
   
+
  xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.32.6-x6.2/install-me.sh
+
 
  sudo /bin/bash install-me.sh
+
= raw microSD img =
 +
 
 +
== BeagleBoard xM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum bbxm-debian-8.7-console-armhf-2017-03-09-2gb*
 +
1346b0ce597b23c51ff02403f6ed929e80d70861fad4728a848997113757dee9  bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== All BeagleBone Varients ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
  git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2017-03-09
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum bone-debian-8.7-console-armhf-2017-03-09-2gb*
 +
c0485e7c1e6530be47a3f3ef8bc269df3f676e6d27ad933aac8b5addbe362dc1  bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== OMAP5432 uEVM ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
  sudo reboot
 +
 
 +
Image Updated:
 +
*2017-03-09
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/microsd/omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb*
 +
de2e45571ee73007c7e25911ee006129eee1a0c36f41403f0ba4d6c56cfcd1ec  omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
Reboot with your new uImage
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
= Debian Configuration =
+
Linux: (dd)
 +
xzcat omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
== Serial Ports ==
+
== BeagleBoard-X15 ==
  
Lenny
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
edit /etc/inittab and add:
+
User: debian
S:2345:respawn:/sbin/getty 115200 ttyS2
+
pass: temppwd
  
For root access over the serial port add ttyS2 to /etc/securetty
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
== WiFi ==
+
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
== SGX Video Acceleration ==
+
Verify Image with:
 +
sha256sum bbx15-debian-8.7-console-armhf-2017-03-09-2gb*
 +
0a38bc898faea01299b80a4990033c02ad71fb16466874679bb14017d19308f9  bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
Use a "corporate email" and download the latest (3.01.00.02):
+
Windows/Mac/Linux gui
  http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/latest/index_FDS.html
+
  http://etcher.io
  
=== Kernel Modules ===
+
Linux: (dd)
 +
xzcat bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
Use the "build_sgx_module.sh" script in 2.6-stable, module source is now in the *.bin
+
= Debian Configuration =
  
https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
+
==Install Latest Kernel Image==
  
Copy uImage and modules from the deploy directory to your SD card.
+
General apt syntax for searching and installing a specific kernel:
 +
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
sudo reboot
  
Copy the GFX_Linux_SDK.tar.gz examples to either your SD card or another media (large file) then boot your omap board.
+
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
Run depmod:
+
== 3.8.x ==
  sudo depmod -a omaplfb
+
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
 +
  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
  
Tweak System Libraries:
+
  3.8.x BeagleBone/BeagleBone Black FULL Cape Support
  sudo ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
+
  --bone-channel --stable
  sudo ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
 
  
=== Startup Script ===
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
 +
--bone-xenomai-channel --stable
  
For 3.01.00.02
+
== 4.4.x-ti ==
 +
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
  
Lenny:
+
  4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
  sudo nano /etc/rcS.d/S60pvr.sh
+
--ti-channel --lts-4_4
sudo chmod +x /etc/rcS.d/S60pvr.sh
 
  
Squeeze: (probally lenny too)
+
  4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
  sudo nano /etc/init.d/pvr
+
  --ti-rt-channel --lts-4_4
sudo chmod +x /etc/init.d/pvr
 
  sudo update-rc.d pvr defaults
 
  
Contents of S60pvr.sh/pvr
+
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
#!/bin/sh
+
  --ti-xenomai-channel --lts-4_4
+
 
if [ "$1" = "" ]; then
+
== Mainline (4.4.x lts) ==
echo PVR-INIT: Please use start, stop, or restart.
 
exit 1
 
fi
 
   
 
if [ "$1" = "stop" -o  "$1" = "restart" ]; then
 
echo Stopping PVR
 
rmmod omaplfb 2>/dev/null
 
rmmod pvrsrvkm 2>/dev/null
 
fi
 
 
if [ "$1" = "stop" ]; then
 
exit 0
 
fi
 
 
echo Starting PVR
 
modprobe omaplfb
 
 
pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
 
 
if [ -e /dev/pvrsrvkm ] ; then
 
rm -f /dev/pvrsrvkm
 
fi
 
 
mknod /dev/pvrsrvkm c $pvr_maj 0
 
chmod 666 /dev/pvrsrvkm
 
 
touch /etc/powervr-esrev
 
 
SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
 
ES_REVISION="$(cat /proc/cpuinfo | grep "CPU revision" | awk -F: '{print $2}')"
 
 
if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
 
echo -n "Starting SGX fixup for"
 
if [ "${ES_REVISION}" = " 3" ] ; then
 
echo " ES3.x"
 
cp -a /usr/lib/ES3.0/* /usr/lib
 
cp -a /usr/bin/ES3.0/* /usr/bin
 
else
 
echo " ES2.x"
 
cp -a /usr/lib/ES2.0/* /usr/lib
 
cp -a /usr/bin/ES2.0/* /usr/bin
 
fi
 
 
echo "${ES_REVISION}" > /etc/powervr-esrev
 
fi
 
 
/usr/bin/pvrsrvinit
 
  
=== Test SGX with a DEMO ===
+
4.4.x BeagleBone/BeagleBone Black + SGX
 +
--bone-kernel --lts-4_4
  
In GFX_Linux_SDK:
+
  4.4.x BeagleBone/BeagleBone Black + RT + SGX
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/ChameleonMan
+
  --bone-rt-kernel --lts-4_4
  ./OGLESChameleonMan
 
  
=== Trouble Shooting ===
+
== Mainline (4.9.x lts) ==
  
  sudo rm /etc/powervr-esrev
+
  4.9.x BeagleBone/BeagleBone Black
  sudo depmod -a omaplfb
+
  --bone-kernel --lts-4_9
sudo /etc/init.d/pvr restart
 
  
== Xorg omapfb Drivers ==
+
4.9.x BeagleBone/BeagleBone Black + RT
 +
--bone-rt-kernel --lts-4_9
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Debian 8: jessie ==
 +
sudo apt-get install linux-image-armmp
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
Reboot with your new Kernel Image.
  
/etc/X11/xorg.conf:
+
== Xorg Drivers ==
Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
Script:
(II) FBDEV: driver for framebuffer: fbdev
+
cd /opt/scripts/tools/
(II) FBDEV(0): using default device
+
  git pull
  (II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
xvinfo -display :0.0
+
BeagleBone/BeagleBone Black:
  X-Video Extension version 2.2
+
  cd /opt/scripts/tools/graphics/
screen #0
+
./ti-tilcdc.sh
  no adaptors present
 
  
=== Drivers ===
+
== SGX Drivers ==
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
=== SGX BeagleBone/BeagleBone Black ===
  
Lenny:
+
Note, these are FBDEV only, no xorg/x11/etc...
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
Squeeze/Sid:
+
Install the "4.4.x" lts/bone kernel:
sudo apt-get install xserver-xorg-video-omap3
+
http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
  
=== xorg.conf ===
+
Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
/etc/X11/xorg.conf
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.4 -b tmp-sgx
 +
./sgx_create_package.sh
  
Section "Monitor"
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
    Identifier "Configured Monitor"
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
  EndSection
+
  cd /opt/gfxinstall/
   
+
  sudo ./sgx-install.sh
  Section "Screen"
+
  sudo reboot
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
  
To verify it was correctly installed, reboot and:
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
cat /var/log/Xorg.0.log | grep omapfb
+
= Building Kernel =
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
xvinfo -display :0.0
+
== Beagle/Beagle xM ==
  X-Video Extension version 2.2
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== DSP ==
+
== BeagleBone ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone
  
= Kernel Build =
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
https://launchpad.net/~beagleboard-kernel
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
Register on launchpad.net, install bzr
+
= Upgrading from Debian 5 to Debian 6 =
sudo apt-get install bzr
 
  
Download SRC
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
bzr branch lp:~beagleboard-kernel/+junk/2.6-dev
 
  
Build Kernel
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
. build_kernel.sh
 
  
Build SGX Modules
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
. build_sgx_modules.sh
 
  
Build Deb File
+
sudo apt-get update ; sudo apt-get upgrade
  . build_deb.sh
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 12:19, 13 March 2017

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.9.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-8.7-console-armhf-2017-03-09.tar.xz

Verify Image with:

sha256sum debian-8.7-console-armhf-2017-03-09.tar.xz
80756ca1ab2c7cbbd38e1ff360ef66425ffdbec1ad3519702b53ab0b894e26a1  debian-8.7-console-armhf-2017-03-09.tar.xz

Unpack Image:

tar xf debian-8.7-console-armhf-2017-03-09.tar.xz
cd debian-8.7-console-armhf-2017-03-09

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-stretch-console-armhf-2017-03-09.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2017-03-09.tar.xz
e827a6f8843a3985b8d26150168e4fa433fb190ec596451113552cbcc8c4b2cf  debian-stretch-console-armhf-2017-03-09.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2017-03-09.tar.xz
cd debian-stretch-console-armhf-2017-03-09

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-03-09
    • All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
34a3f2c9147fa6a5fefae831d4bf0a74b744e4993a66b45e488829bba72ba0eb  BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
66a1c3ca2f3b4a00c74e8f626a8d574093226747d9ec25255254c4f0ce798573  bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.7-console-armhf-2017-03-09-2gb*
1346b0ce597b23c51ff02403f6ed929e80d70861fad4728a848997113757dee9  bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.7-console-armhf-2017-03-09-2gb*
c0485e7c1e6530be47a3f3ef8bc269df3f676e6d27ad933aac8b5addbe362dc1  bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb*
de2e45571ee73007c7e25911ee006129eee1a0c36f41403f0ba4d6c56cfcd1ec  omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.7-console-armhf-2017-03-09-2gb*
0a38bc898faea01299b80a4990033c02ad71fb16466874679bb14017d19308f9  bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_4

Mainline (4.4.x lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_9

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.4 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade