Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (armhf Demo Image: switch to sid)
m (2017-03-09)
(181 intermediate revisions by 12 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
 
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
 
  
 
= Help =
 
= Help =
Line 12: Line 10:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel Stable Kernel 2.6.39 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
*** [https://github.com/RobertCNelson/3.0-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 23: Line 22:
 
** pastebin dmesg
 
** pastebin dmesg
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 +
 +
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
 
= Recommended Beagle Software =  
 
= Recommended Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
 
= Debian NetInstall =  
 
= Debian NetInstall =  
 +
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Squeeze ==
+
== Debian 8 (jessie) ==
  
  git clone git://github.com/RobertCNelson/netinstall.git
+
Quick Install script for "board"
cd netinstall
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
  
Install script for Beagle Bx
+
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_bx --distro squeeze
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  
Install script for Beagle Cx, xM A/B/C
+
*Options:
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle --distro squeeze
+
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
  
Install script for BeagleBone A2/A3
+
= Demo Image =
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot bone --distro squeeze
 
  
Install script for Panda
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot panda --distro squeeze
+
  git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.9.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.4.y -b tmp
 +
./build_kernel.sh
  
*Options:
+
== Debian (jessie) ==
**--uboot : beagle, panda, bone
 
**--distro : squeeze
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
  
NOTE: There is a bug in the USB Keyboard mapping, the debian-installer will initially fail, if and when the error occurs switch to the option "kernel keymap" and continue installing..
+
Default username/password:
 +
*username: debian
 +
*password: temppwd
  
==Beagleboard: NetInstall==
+
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
  
  Choose a language
+
Services Active:
  C - No localization
+
  Note: Depending on your internal network these may work out of the box
  English - English
+
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
  
Configure the network:
+
Default user: debian pass: temppwd
  usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
 
  usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
 
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
===usb0 howto===
+
Get prebuilt image:
There's a lot of question on irc about this, it might make sense to add a wiki page going thru with linux/winxp etc.. --[[User:RobertCNelson|RobertCNelson]] 00:55, 23 April 2010 (UTC)
+
wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-8.7-console-armhf-2017-03-09.tar.xz
  
Configuring usb0 network bridge for 2.6.29:
+
Verify Image with:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
sha256sum debian-8.7-console-armhf-2017-03-09.tar.xz
  # ifconfig ethX 0.0.0.0
+
80756ca1ab2c7cbbd38e1ff360ef66425ffdbec1ad3519702b53ab0b894e26a1  debian-8.7-console-armhf-2017-03-09.tar.xz
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Unpack Image:
 +
  tar xf debian-8.7-console-armhf-2017-03-09.tar.xz
 +
cd debian-8.7-console-armhf-2017-03-09
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
If you don't know the location of your SD card:
  Logical Volume Manager not available: <Continue>
+
sudo ./setup_sdcard.sh --probe-mmc
  
Partition disks:
+
You should see something like:
  Guided - Use the largest continuous free space
 
  
  Partitioning scheme....
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
Example:
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
 
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
  
No installable kernel was found in the defined APT sources? :  
+
Install Image:
  Continue without installing a kernel? : <yes>
 
  
  Standard System
+
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
No BootLoader: <ok>
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Varients          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
  
==Beagleboard: Install Latest Kernel==
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
Script File:
+
Advanced: Build Image:
  
  Lenny:
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
wget http://rcn-ee.net/deb/lenny/v2.6.39.3-old3/install-me.sh
+
  cd omap-image-builder
sudo /bin/bash install-me.sh
+
  git checkout v2017.03 -b tmp
   
 
Squeeze:
 
export DIST=squeeze
 
wget http://rcn-ee.net/deb/${DIST}/LATEST-omap
 
  wget $(cat ./LATEST-omap | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new Kernel
+
Stable:
  
= Debian armhf port =
+
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
  
The armhf port of Debian is still only on the ports server, it hasn't been merged to main..
+
Testing:
  
Port Details: http://wiki.debian.org/ArmHardFloatPort
+
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
Status: http://wiki.debian.org/ArmHardFloatTodo
 
  
== armhf Demo Image ==
+
== Debian Testing (stretch) ==
  
 
Image Updated:
 
Image Updated:
*Dec 7: Switched image to sid vs ports/unstable..
+
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-stretch-console-armhf-2017-03-09.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-stretch-console-armhf-2017-03-09.tar.xz
 +
e827a6f8843a3985b8d26150168e4fa433fb190ec596451113552cbcc8c4b2cf  debian-stretch-console-armhf-2017-03-09.tar.xz
 +
 
 +
Unpack image:
 +
tar xf debian-stretch-console-armhf-2017-03-09.tar.xz
 +
cd debian-stretch-console-armhf-2017-03-09
  
Services Active:
+
Then follow the directions shown above with the other images...
  Note: Depending on your internal network these may work out the box
+
 
  SSH, Port 22: ssh ubuntu@omap
+
= Flasher =
  Getty, Serial Port
+
 
 +
== eMMC: All BeagleBone Varients with eMMC ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Default user: debian pass: temppwd
+
User: debian
 +
pass: temppwd
  
Default root user: root pass: root
+
Image Updated:
 +
*2017-03-09
 +
** All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
  wget http://rcn-ee.net/deb/rootfs/sid/sid-minimal-armhf-2011-12-07.tar.xz
+
Verify Image with:
  mirrors (will take some time to update):
+
  sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
  wget http://ynezz.ibawizard.net/beagleboard/sid/sid-minimal-armhf-2011-12-07.tar.xz
+
  34a3f2c9147fa6a5fefae831d4bf0a74b744e4993a66b45e488829bba72ba0eb BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
Verify Image with:
+
Windows/Mac/Linux gui
  md5sum sid-minimal-armhf-2011-12-07.tar.xz
+
  http://etcher.io
02aad3c6148ed7936bf755140be80b45  sid-minimal-armhf-2011-12-07.tar.xz
 
  
Unpack Image:
+
Linux: (dd)
  tar xJf sid-minimal-armhf-2011-12-07.tar.xz
+
  xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  cd sid-minimal-armhf-2011-12-07
+
 
 +
== eMMC: BeagleBoard-X15 ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
Install Image:
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Quick Install script for Beagle Bx
+
This script will only take about 5-6 Minutes after power on.
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_bx
 
  
Quick Install script for Beagle Cx
+
Notes:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_cx
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Quick Install script for Beagle xM A/B/C
+
User: debian
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
pass: temppwd
  
Quick Install script for BeagleBone A2/A3
+
Image Updated:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone
+
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
  
Quick Install script for Panda
+
Get prebuilt image:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot panda
+
  wget https://rcn-ee.com/rootfs/2017-03-09/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
*Additional Options
+
Verify Image with:
** --rootfs <ext4 default>
+
sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
** --swap_file <swap file size in MB's>
+
66a1c3ca2f3b4a00c74e8f626a8d574093226747d9ec25255254c4f0ce798573  bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
** --addon pico <ti pico projector>
 
** --addon ulcd <CircuitCo 7 inch lcd>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
Bugs:
+
Windows/Mac/Linux gui
*do NOT run update-initramfs and update the boot uInitrd, as location of ld-linux.so.3 gets moved.. but is known and patched, it'll just take awhile to get rebuilt. So the next update of this image should have it..
+
http://etcher.io
  
== rootstock for armhf ==
+
Linux: (dd)
 +
xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
Using: https://github.com/RobertCNelson/project-rootstock
+
= raw microSD img =
  
Must have, these options for debian armhf...
+
== BeagleBoard xM ==
--components "main" --arch armhf --mirror http://ftp.debian-ports.org/debian/
 
  
= Debian Configuration =
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
== Serial Ports ==
+
User: debian
 +
pass: temppwd
  
Lenny
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
edit /etc/inittab and add:
+
Image Updated:
S:2345:respawn:/sbin/getty 115200 ttyS2
+
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
*2017-01-13
 +
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
  
For root access over the serial port add ttyS2 to /etc/securetty
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
 +
Verify Image with:
 +
sha256sum bbxm-debian-8.7-console-armhf-2017-03-09-2gb*
 +
1346b0ce597b23c51ff02403f6ed929e80d70861fad4728a848997113757dee9  bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
 +
Windows/Mac/Linux gui
 +
http://etcher.io
  
Squeeze
+
Linux: (dd)
 +
xzcat bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
edit /etc/inittab and add:
+
== All BeagleBone Varients ==
S:2345:respawn:/sbin/getty 115200 ttyO2
 
  
== WiFi ==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
User: debian
 +
pass: temppwd
  
== SGX Video Acceleration ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Image Updated:
  https://github.com/RobertCNelson/stable-kernel
+
*2017-03-09
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
=== SDK unPackage Script ===
+
Verify Image with:
 +
sha256sum bone-debian-8.7-console-armhf-2017-03-09-2gb*
 +
c0485e7c1e6530be47a3f3ef8bc269df3f676e6d27ad933aac8b5addbe362dc1  bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
Download the latest version of the "create_sgx_package.sh" script
+
Windows/Mac/Linux gui
2.6.37
+
  http://etcher.io
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package_2.6.37.sh
 
  2.6.38+
 
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_sgx_package.sh
 
  
Make script executable
+
Linux: (dd)
  chmod a+x ./create_sgx_package.sh
+
  xzcat bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
Run script
+
== OMAP5432 uEVM ==
./create_sgx_package.sh
 
  
After Successfully running:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
:~/temp$ ls
+
User: debian
create_sgx_package.sh
+
pass: temppwd
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
 
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
  
=== Beagle: GFX_*_libs.tar.gz ===
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
Image Updated:
./install-SGX.sh (copies necessary SGX libs and startup script)
+
*2017-03-09
./run-SGX.sh (force run the new init script, or you can just reboot...)
+
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
  
On Successful install:
+
Get prebuilt image:
  Stopping PVR
+
  wget https://rcn-ee.com/rootfs/2017-03-09/microsd/omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
  
Reboot for good measure
+
Verify Image with:
 +
sha256sum omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb*
 +
de2e45571ee73007c7e25911ee006129eee1a0c36f41403f0ba4d6c56cfcd1ec  omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 
 +
Linux: (dd)
 +
xzcat omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
 +
 
 +
== BeagleBoard-X15 ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
*2017-01-13
 +
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
  
  tar xf GFX_Linux_SDK.tar.gz
+
Get prebuilt image:
cd GFX_Linux_SDK
+
  wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
tar xf OGLES.tar.gz
 
  
=== Test SGX with a DEMO ===
+
Verify Image with:
 +
sha256sum bbx15-debian-8.7-console-armhf-2017-03-09-2gb*
 +
0a38bc898faea01299b80a4990033c02ad71fb16466874679bb14017d19308f9  bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz
  
cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
+
Windows/Mac/Linux gui
./OGLESEvilSkull
+
http://etcher.io
  
=== Trouble Shooting ===
+
Linux: (dd)
 +
xzcat bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
sudo rm /etc/powervr-esrev
+
= Debian Configuration =
sudo depmod -a omaplfb
 
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
==Install Latest Kernel Image==
  
=== gst-dsp ===
+
General apt syntax for searching and installing a specific kernel:
 +
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
sudo reboot
  
Seems to work on all Beagle's, with atleast 2.6.38+ now...
+
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
Requirements: 2.6-stable from launchpad or 2.6.38+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
== 3.8.x ==
  https://github.com/RobertCNelson/stable-kernel
+
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
  
Download the latest version of the "create_dsp_package.sh" script
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
  wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_dsp_package.sh
+
  --bone-channel --stable
  
Make script executable
+
  3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
  chmod a+x ./create_dsp_package.sh
+
--bone-xenomai-channel --stable
  
Package script:
+
== 4.4.x-ti ==
  ./create_dsp_package.sh
+
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
 +
  Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
  
Copy DSP_Install_libs.tar.gz to beagle
+
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
 +
--ti-channel --lts-4_4
  
Setup network...
+
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_4
  
Extract:
+
  4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
  tar xf DSP_Install_libs.tar.gz
+
--ti-xenomai-channel --lts-4_4
  
Install
+
== Mainline (4.4.x lts) ==
./install-DSP.sh
 
  
Build gst-dsp stuff..
+
4.4.x BeagleBone/BeagleBone Black + SGX
  ./install-gst-dsp.sh
+
  --bone-kernel --lts-4_4
  
Playbin:
+
4.4.x BeagleBone/BeagleBone Black + RT + SGX
  sudo gst-launch playbin2 uri=file://(file)
+
  --bone-rt-kernel --lts-4_4
  
== Xorg omapfb Drivers ==
+
== Mainline (4.9.x lts) ==
  
By default Debian will try* to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
4.9.x BeagleBone/BeagleBone Black
 +
--bone-kernel --lts-4_9
  
Lenny might need this xorg.conf, but it's best to use omapfb later in this guide..
+
4.9.x BeagleBone/BeagleBone Black + RT
 +
--bone-rt-kernel --lts-4_9
  
/etc/X11/xorg.conf:
+
== Debian 8: jessie ==
  Section "Device"
+
  sudo apt-get install linux-image-armmp
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
  
cat /var/log/Xorg.0.log | grep FBDEV
+
Reboot with your new Kernel Image.
(II) FBDEV: driver for framebuffer: fbdev
 
(II) FBDEV(0): using default device
 
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
== Xorg Drivers ==
  
xvinfo -display :0.0
+
Script:
  X-Video Extension version 2.2
+
  cd /opt/scripts/tools/
  screen #0
+
  git pull
  no adaptors present
 
  
=== Drivers ===
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
  ./ti-tilcdc.sh
  
Lenny:
+
== SGX Drivers ==
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
Squeeze/Sid:
+
=== SGX BeagleBone/BeagleBone Black ===
sudo apt-get install xserver-xorg-video-omap3
 
  
=== xorg.conf ===
+
Note, these are FBDEV only, no xorg/x11/etc...
/etc/X11/xorg.conf
 
  
Section "Monitor"
+
Install the "4.4.x" lts/bone kernel:
    Identifier "Configured Monitor"
+
http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
EndSection
 
 
Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
EndSection
 
  
To verify it was correctly installed, reboot and:
+
Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.4 -b tmp-sgx
 +
./sgx_create_package.sh
  
cat /var/log/Xorg.0.log | grep omapfb
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
  (II) LoadModule: "omapfb"
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
  (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
+
  cd /opt/gfxinstall/
  (II) Module omapfb: vendor="X.Org Foundation"
+
  sudo ./sgx-install.sh
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
+
  sudo reboot
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
  (II) omapfb(0): XVideo extension initialized
 
  
Login into Debian and open a new terminal, xorg has to be running..
+
Verify omaplfb & pvrsrvkm loaded
 +
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
xvinfo -display :0.0
+
= Building Kernel =
X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Building Kernel ==
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
https://github.com/RobertCNelson/stable-kernel
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
Download SRC
+
== BeagleBone ==
  git clone git://github.com/RobertCNelson/stable-kernel.git
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
Build Kernel
+
== BeagleBone Black ==
  ./build_kernel.sh
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Optional Building Deb File
+
== Panda/Panda ES ==
  ./build_deb.sh
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
 
= Upgrading from Debian 5 to Debian 6 =
 
= Upgrading from Debian 5 to Debian 6 =
  
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
 +
 +
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
 +
 +
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
 +
 +
sudo apt-get update ; sudo apt-get upgrade
 +
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 12:19, 13 March 2017

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.9.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-8.7-console-armhf-2017-03-09.tar.xz

Verify Image with:

sha256sum debian-8.7-console-armhf-2017-03-09.tar.xz
80756ca1ab2c7cbbd38e1ff360ef66425ffdbec1ad3519702b53ab0b894e26a1  debian-8.7-console-armhf-2017-03-09.tar.xz

Unpack Image:

tar xf debian-8.7-console-armhf-2017-03-09.tar.xz
cd debian-8.7-console-armhf-2017-03-09

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/elinux/debian-stretch-console-armhf-2017-03-09.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2017-03-09.tar.xz
e827a6f8843a3985b8d26150168e4fa433fb190ec596451113552cbcc8c4b2cf  debian-stretch-console-armhf-2017-03-09.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2017-03-09.tar.xz
cd debian-stretch-console-armhf-2017-03-09

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-03-09
    • All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
34a3f2c9147fa6a5fefae831d4bf0a74b744e4993a66b45e488829bba72ba0eb  BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb*
66a1c3ca2f3b4a00c74e8f626a8d574093226747d9ec25255254c4f0ce798573  bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.7-console-armhf-2017-03-09-2gb*
1346b0ce597b23c51ff02403f6ed929e80d70861fad4728a848997113757dee9  bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.7-console-armhf-2017-03-09-2gb*
c0485e7c1e6530be47a3f3ef8bc269df3f676e6d27ad933aac8b5addbe362dc1  bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb*
de2e45571ee73007c7e25911ee006129eee1a0c36f41403f0ba4d6c56cfcd1ec  omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.7-console-armhf-2017-03-09-2gb*
0a38bc898faea01299b80a4990033c02ad71fb16466874679bb14017d19308f9  bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.7-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_4

Mainline (4.4.x lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_9

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.4 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade