Revision as of 09:51, 7 April 2017

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees

When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
  - Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

http://beagleboard.org/source

Recommended Beagle Software

Mainline U-Boot:

All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie

Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port

Demo Image

Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.9.x -b tmp
./build_kernel.sh

Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

username: debian
password: temppwd

Image Updated:

2017-04-07
- BeagleBoard xM: v4.9.20-armv7-x4 kernel
- All BeagleBone Varients: v4.4.59-ti-r96 kernel
- OMAP5432 uEVM: v4.4.59-ti-r96 kernel
- BeagleBoard-X15: v4.4.59-ti-r96 kernel
2017-03-09
- BeagleBoard xM: v4.9.13-armv7-x4 kernel
- All BeagleBone Varients: v4.4.52-ti-r91 kernel
- OMAP5432 uEVM: v4.4.52-ti-r91 kernel
- BeagleBoard-X15: v4.4.52-ti-r91 kernel
2017-01-23
- BeagleBoard xM: v4.9.5-armv7-x4 kernel
- All BeagleBone Varients: v4.4.43-ti-r84 kernel
- OMAP5432 uEVM: v4.4.43-ti-r84 kernel
- BeagleBoard-X15: v4.4.43-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-8.7-console-armhf-2017-04-07.tar.xz

Verify Image with:

sha256sum debian-8.7-console-armhf-2017-04-07.tar.xz
a76dab3171a6b0299a60a9d8331b982f68ae3b62188e51b6b08be2763b41efdd  debian-8.7-console-armhf-2017-04-07.tar.xz

Unpack Image:

tar xf debian-8.7-console-armhf-2017-04-07.tar.xz
cd debian-8.7-console-armhf-2017-04-07

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part

In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
BeagleBoard xM - omap3-beagle-xm
All BeagleBone Varients - beaglebone
OMAP5432 uEVM - omap5-uevm
BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.04 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

2017-04-07
- BeagleBoard xM: v4.9.20-armv7-x4 kernel
- All BeagleBone Varients: v4.4.59-ti-r96 kernel
- OMAP5432 uEVM: v4.4.59-ti-r96 kernel
- BeagleBoard-X15: v4.4.59-ti-r96 kernel
2017-03-09
- BeagleBoard xM: v4.9.13-armv7-x4 kernel
- All BeagleBone Varients: v4.4.52-ti-r91 kernel
- OMAP5432 uEVM: v4.4.52-ti-r91 kernel
- BeagleBoard-X15: v4.4.52-ti-r91 kernel
2017-01-23
- BeagleBoard xM: v4.9.5-armv7-x4 kernel
- All BeagleBone Varients: v4.4.43-ti-r84 kernel
- OMAP5432 uEVM: v4.4.43-ti-r84 kernel
- BeagleBoard-X15: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-stretch-console-armhf-2017-04-07.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2017-04-07.tar.xz
998b4fca4d6f232d72f227a286bdad44c0a40bb794904249330f6776ad628fa0  debian-stretch-console-armhf-2017-04-07.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2017-04-07.tar.xz
cd debian-stretch-console-armhf-2017-04-07

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2017-04-07
- All BeagleBone Varients with eMMC: v4.4.59-ti-r96 kernel
2017-03-09
- All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
2017-01-23
- All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
fdcf012f4dd773fbbf66f3a97da1e35cc3a3b444b1195a0ea8380d61936a3145  BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

2017-04-07
- BeagleBoard-X15: v4.4.59-ti-r96 kernel
2017-03-09
- BeagleBoard-X15: v4.4.52-ti-r91 kernel
2017-01-23
- BeagleBoard-X15: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
f2db385c72216da54754d1470738b5ede2f8146ab3c7da01976f15d59e26dddf  bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2017-04-07
- BeagleBoard xM: v4.9.20-armv7-x4 kernel
2017-03-09
- BeagleBoard xM: v4.9.13-armv7-x4 kernel
2017-01-23
- BeagleBoard xM: v4.9.5-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.7-console-armhf-2017-04-07-2gb*
934303e755677854c958e33319f7c80d9f26fd3bb788d1eb971ea8e134035726  bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2017-04-07
- All BeagleBone Varients: v4.4.59-ti-r96 kernel
2017-03-09
- All BeagleBone Varients: v4.4.52-ti-r91 kernel
2017-01-23
- All BeagleBone Varients: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.7-console-armhf-2017-04-07-2gb*
e85bca49efaa2ba22f023c3c435c87297419f902d79ee79468c0eb1414b01671  bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2017-04-07
- OMAP5432 uEVM: v4.4.59-ti-r96 kernel
2017-03-09
- OMAP5432 uEVM: v4.4.52-ti-r91 kernel
2017-01-23
- OMAP5432 uEVM: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb*
562130678f137ecb09b36d602f666e20cf3d2673964d43a2497b216522288b43  omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

2017-04-07
- BeagleBoard-X15: v4.4.59-ti-r96 kernel
2017-03-09
- BeagleBoard-X15: v4.4.52-ti-r91 kernel
2017-01-23
- BeagleBoard-X15: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.7-console-armhf-2017-04-07-2gb*
41524001ccf7ca5f79ef3bc17f7d03f8bd1c424333cf46c6dcd214300b9ff5b7  bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8

3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable

3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y

4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4

4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4

4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_4

Mainline (4.4.x lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4

4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9

4.9.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_9

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29

Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.4 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

@@ Line 3: / Line 3: @@
 [[Category:Development Boards]]
 [[Category: BeagleBoard]]
-This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
+This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 = Help =
@@ Line 10: / Line 10: @@
 *Kernel related help:
-** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
-** Kernel Tree's
+** Kernel Trees
-*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.13.x kernel branch]
+*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
+*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
@@ Line 21: / Line 22: @@
 ** pastebin dmesg
 *** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
+= Official BeagleBoard.org Images for shipping with BeagleBone Black =
+* http://beagleboard.org/source
 = Recommended Beagle Software =
@@ Line 32: / Line 36: @@
 Scripts:
-  git clone git://github.com/RobertCNelson/netinstall.git
+  git clone https://github.com/RobertCNelson/netinstall.git
   cd netinstall
 Device Options:
   BeagleBoard --dtb omap3-beagle
-  BeagleBoard xM --dtb omap3-beagle-xm
+  BeagleBoard-xM --dtb omap3-beagle-xm
+ BeagleBoard-X15 --dtb am57xx-beagle-x15
   BeagleBone (serial) --dtb am335x-bone-serial
   BeagleBone (video via cape) --dtb am335x-bone-video
@@ Line 47: / Line 52: @@
 You will need a 1GB SD card or greater.
   Standard System : ~455MB
- + Desktop environment (GNOME) : ~2.9GB
-== Debian Wheezy ==
+== Debian 8 (jessie) ==
 Quick Install script for "board"
-  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 So For the BeagleBoard xM:
-  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
+  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 *Options:
@@ Line 61: / Line 65: @@
 **--serial-mode : debian-installer uses Serial Port
+= Demo Image =
-= Demo Image =
+* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
+ git clone https://github.com/RobertCNelson/armv7-multiplatform.git
+ cd armv7-multiplatform
+ git checkout origin/v4.9.x -b tmp
+ ./build_kernel.sh
+* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
+ git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
+ cd ti-linux-kernel-dev
+ git checkout origin/ti-linux-4.4.y -b tmp
+ ./build_kernel.sh
-== Debian Stable (wheezy)  ==
+== Debian (jessie) ==
 Default username/password:
 *username: debian
 *password: temppwd
-Default root user/password
-*user: root
-*password: root
 Image Updated:
-*2014-01-24
+*2017-04-07
-** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
+** BeagleBoard xM: v4.9.20-armv7-x4 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+** All BeagleBone Varients: v4.4.59-ti-r96 kernel
-*2013-12-17
+** OMAP5432 uEVM: v4.4.59-ti-r96 kernel
-** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
+** BeagleBoard-X15: v4.4.59-ti-r96 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+*2017-03-09
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.9.13-armv7-x4 kernel
-*2013-11-15
+** All BeagleBone Varients: v4.4.52-ti-r91 kernel
-** Beagle xM (ONLY): v3.12.0-armv7-x8 kernel (--dtb dt-beagle-xm)
+** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone30 kernel
+** BeagleBoard-X15: v4.4.52-ti-r91 kernel
-*** audio/mmc fixes...
+*2017-01-23
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.9.5-armv7-x4 kernel
+** All BeagleBone Varients: v4.4.43-ti-r84 kernel
+** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
+** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 Services Active:
   Note: Depending on your internal network these may work out of the box
-  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
+  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
-  SSH, Port 22: ssh debian@arm (Bone: via usb) debian@192.168.7.2
+  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
   Getty, Serial Port
@@ Line 97: / Line 110: @@
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.3-console-armhf-2014-01-24.tar.xz
+  wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-8.7-console-armhf-2017-04-07.tar.xz
 Verify Image with:
-  md5sum debian-7.3-console-armhf-2014-01-24.tar.xz
+  sha256sum debian-8.7-console-armhf-2017-04-07.tar.xz
-a2221a3f5a46d69f45148401d9952a  debian-7.3-console-armhf-2014-01-24.tar.xz
+  a76dab3171a6b0299a60a9d8331b982f68ae3b62188e51b6b08be2763b41efdd  debian-8.7-console-armhf-2017-04-07.tar.xz
 Unpack Image:
-  tar xf debian-7.3-console-armhf-2014-01-24.tar.xz
+  tar xf debian-8.7-console-armhf-2017-04-07.tar.xz
-  cd debian-7.3-console-armhf-2014-01-24
+  cd debian-8.7-console-armhf-2017-04-07
+If you don't know the location of your SD card:
+ sudo ./setup_sdcard.sh --probe-mmc
-Install Image:
+You should see something like:
-Quick install script for [board]
+ Are you sure? I don't see [/dev/idontknow], here is what I do see...
-  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board
+  fdisk -l:
+ Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
+ Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
+ lsblk:
+ NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
+ sda      8:0    0 465.8G  0 disk
+ ├─sda1   8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
+ ├─sda2   8:2    0     1K  0 part
+ └─sda5   8:5    0  18.9G  0 part [SWAP]
+ sdd      8:48   1   3.7G  0 disk
+ ├─sdd1   8:49   1    64M  0 part
+ └─sdd2   8:50   1   3.6G  0 part
-[board] options:
+* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
-*BeagleBone/Black     - bone
-So for the BeagleBone:
+Install Image:
- sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone
-Quick install script for [board] (using new --dtb option)
+Quick install script for [board]
   sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 board options:
-*BeagleBoard Ax/Bx/Cx/Dx    - omap3-beagle
+*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
-*BeagleBoard xM             - omap3-beagle-xm
+*BeagleBoard xM                   - omap3-beagle-xm
+*All BeagleBone Varients          - beaglebone
+*OMAP5432 uEVM                    - omap5-uevm
+*BeagleBoard-X15                  - am57xx-beagle-x15
 So for the BeagleBoard xM:
@@ Line 130: / Line 160: @@
 Advanced: Build Image:
-Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
+ git clone https://github.com/RobertCNelson/omap-image-builder.git
+ cd omap-image-builder
+ git checkout v2017.04 -b tmp
+Stable:
+ ./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
+Testing:
-  git clone git://github.com/RobertCNelson/omap-image-builder.git
+  ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
- cd omap-image-builder
- git checkout v2014.01-1 -b tmp
- touch release
- ./rcn-ee_image.sh
-== Debian Testing (jessie) ==
+== Debian Testing (stretch) ==
 Image Updated:
-*2014-01-24
+*2017-04-07
-** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
+** BeagleBoard xM: v4.9.20-armv7-x4 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+** All BeagleBone Varients: v4.4.59-ti-r96 kernel
-*2013-12-17
+** OMAP5432 uEVM: v4.4.59-ti-r96 kernel
-** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
+** BeagleBoard-X15: v4.4.59-ti-r96 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+*2017-03-09
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.9.13-armv7-x4 kernel
-*2013-11-15
+** All BeagleBone Varients: v4.4.52-ti-r91 kernel
-** Beagle xM (ONLY): v3.12.0-armv7-x8 kernel (--dtb dt-beagle-xm)
+** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
-** BeagleBone/BeagleBone Black: v3.8.13-bone30 kernel
+** BeagleBoard-X15: v4.4.52-ti-r91 kernel
-*** audio/mmc fixes...
+*2017-01-23
-** Beagle/Panda/Panda ES: v3.7.10-x13 kernel
+** BeagleBoard xM: v4.9.5-armv7-x4 kernel
+** All BeagleBone Varients: v4.4.43-ti-r84 kernel
+** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
+** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-01-24.tar.xz
+  wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-stretch-console-armhf-2017-04-07.tar.xz
 Verify Image with:
-  md5sum debian-jessie-console-armhf-2014-01-24.tar.xz
+  sha256sum debian-stretch-console-armhf-2017-04-07.tar.xz
-bd42bef9484a48c54d076a878f  debian-jessie-console-armhf-2014-01-24.tar.xz
+b4fca4d6f232d72f227a286bdad44c0a40bb794904249330f6776ad628fa0  debian-stretch-console-armhf-2017-04-07.tar.xz
 Unpack image:
-  tar xf debian-jessie-console-armhf-2014-01-24.tar.xz
+  tar xf debian-stretch-console-armhf-2017-04-07.tar.xz
-  cd debian-jessie-console-armhf-2014-01-24
+  cd debian-stretch-console-armhf-2017-04-07
 Then follow the directions shown above with the other images...
@@ Line 169: / Line 206: @@
 = Flasher =
-== eMMC: BeagleBone Black ==
+== eMMC: All BeagleBone Varients with eMMC ==
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 Script for reference: (this is the script that writes to the eMMC)
-  https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-copy-microSD-to-eMMC.sh
+  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
-BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
+This script will only take about 5-6 Minutes after power on.
 Notes:
 * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 * If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
-** (error -84: which may mean you've reached the max number of erase/write cycles...)
 User: debian
 pass: temppwd
-root: root/root
+Image Updated:
+*2017-04-07
+** All BeagleBone Varients with eMMC: v4.4.59-ti-r96 kernel
+*2017-03-09
+** All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
+*2017-01-23
+** All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
+Get prebuilt image:
+ wget https://rcn-ee.com/rootfs/2017-04-07/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Verify Image with:
+ sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
+ fdcf012f4dd773fbbf66f3a97da1e35cc3a3b444b1195a0ea8380d61936a3145  BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Windows/Mac/Linux gui
+ http://etcher.io
+Linux: (dd)
+ xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
+== eMMC: BeagleBoard-X15 ==
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
+Script for reference: (this is the script that writes to the eMMC)
+ https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
+This script will only take about 5-6 Minutes after power on.
+Notes:
+* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
+* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
+User: debian
+pass: temppwd
 Image Updated:
-*2014-01-24
+*2017-04-07
-** BeagleBone Black: v3.8.13-bone37 kernel
+** BeagleBoard-X15: v4.4.59-ti-r96 kernel
-*2013-12-17
+*2017-03-09
-** BeagleBone Black: v3.8.13-bone32 kernel
+** BeagleBoard-X15: v4.4.52-ti-r91 kernel
-*2013-11-15
+*2017-01-23
-** BeagleBone Black: v3.8.13-bone30 kernel
+** BeagleBoard-X15: v4.4.43-ti-r84 kernel
-*** ssh host key fixes (auto generated on bootup...)
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2017-04-07/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
 Verify Image with:
-  md5sum BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+  sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
-b88194ce6f1a8b06195a8168b21b2d9  BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+  f2db385c72216da54754d1470738b5ede2f8146ab3c7da01976f15d59e26dddf  bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
-Follow the "standard" update procedure.
+Windows/Mac/Linux gui
-  http://circuitco.com/support/index.php?title=Updating_The_Software
+  http://etcher.io
-Linux:
+Linux: (dd)
-  unxz BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img.xz
+  xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
- sudo dd if=./BBB-eMMC-flasher-debian-7.3-2014-01-24-2gb.img of=/dev/sdX
 = raw microSD img =
-== BeagleBone ==
+== BeagleBoard xM ==
-This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
 User: debian
 pass: temppwd
-root: root/root
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
+Image Updated:
+*2017-04-07
+** BeagleBoard xM: v4.9.20-armv7-x4 kernel
+*2017-03-09
+** BeagleBoard xM: v4.9.13-armv7-x4 kernel
+*2017-01-23
+** BeagleBoard xM: v4.9.5-armv7-x4 kernel
+Get prebuilt image:
+ wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Verify Image with:
+ sha256sum bbxm-debian-8.7-console-armhf-2017-04-07-2gb*
+e755677854c958e33319f7c80d9f26fd3bb788d1eb971ea8e134035726  bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Windows/Mac/Linux gui
+ http://etcher.io
+Linux: (dd)
+ xzcat bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
+== All BeagleBone Varients ==
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
+User: debian
+pass: temppwd
 Auto partition resize:
@@ Line 229: / Line 330: @@
 Image Updated:
-*2014-01-24
+*2017-04-07
-** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
+** All BeagleBone Varients: v4.4.59-ti-r96 kernel
-*2013-12-17
+*2017-03-09
-** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
+** All BeagleBone Varients: v4.4.52-ti-r91 kernel
-*2013-11-15
+*2017-01-23
-** BeagleBone/BeagleBone Black: v3.8.13-bone30 kernel
+** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 Get prebuilt image:
-  wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.3-2014-01-24-2gb.img.xz
+  wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
 Verify Image with:
-  md5sum bone-debian-7.3-2014-01-24-2gb.img.xz
+  sha256sum bone-debian-8.7-console-armhf-2017-04-07-2gb*
-ed1d0f198f9ae49393ed39a7cad6a41  bone-debian-7.3-2014-01-24-2gb.img.xz
+ e85bca49efaa2ba22f023c3c435c87297419f902d79ee79468c0eb1414b01671  bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Windows/Mac/Linux gui
+  http://etcher.io
+Linux: (dd)
+  xzcat bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
-Linux:
+== OMAP5432 uEVM ==
- unxz bone-debian-7.3-2014-01-24-2gb.img.zx
- sudo dd if=./bone-debian-7.3-2014-01-24-2gb.img of=/dev/sdX
-= Debian Configuration =
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
+User: debian
+pass: temppwd
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
+Image Updated:
+*2017-04-07
+** OMAP5432 uEVM: v4.4.59-ti-r96 kernel
+*2017-03-09
+** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
+*2017-01-23
+** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
+Get prebuilt image:
+ wget https://rcn-ee.com/rootfs/2017-04-07/microsd/omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Verify Image with:
+ sha256sum omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb*
+ 562130678f137ecb09b36d602f666e20cf3d2673964d43a2497b216522288b43  omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Windows/Mac/Linux gui
+ http://etcher.io
+Linux: (dd)
+ xzcat omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
+== BeagleBoard-X15 ==
+This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
+User: debian
+pass: temppwd
+Auto partition resize:
+ cd /opt/scripts/tools
+ git pull
+ ./grow_partition.sh
+ sudo reboot
+Image Updated:
+*2017-04-07
+** BeagleBoard-X15: v4.4.59-ti-r96 kernel
+*2017-03-09
+** BeagleBoard-X15: v4.4.52-ti-r91 kernel
+*2017-01-23
+** BeagleBoard-X15: v4.4.43-ti-r84 kernel
+Get prebuilt image:
+ wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
+Verify Image with:
+ sha256sum bbx15-debian-8.7-console-armhf-2017-04-07-2gb*
+ 41524001ccf7ca5f79ef3bc17f7d03f8bd1c424333cf46c6dcd214300b9ff5b7  bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
-== Serial Ports ==
+Windows/Mac/Linux gui
+ http://etcher.io
-To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
+Linux: (dd)
-  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
+  xzcat bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
-To start a console on the USB ACM device, add the following to /etc/inittab,
+= Debian Configuration =
- GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
 ==Install Latest Kernel Image==
-Script:
+General apt syntax for searching and installing a specific kernel:
-  cd /opt/scripts/tools
+ sudo apt-get update
+ sudo apt-cache search linux-image | grep <branch>
+ sudo apt-get install linux-image-<specific version>
+ sudo reboot
+Latest kernel script
+  cd /opt/scripts/tools/
   git pull
+ sudo ./update_kernel.sh <OPTIONS>
-Stable:
+== 3.8.x ==
-  ./update_kernel.sh
+This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
+ beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
+.8.x BeagleBone/BeagleBone Black FULL Cape Support
+ --bone-channel --stable
+.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
+ --bone-xenomai-channel --stable
+== 4.4.x-ti ==
+This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
+ beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
+  Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
+.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
+ --ti-channel --lts-4_4
+.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
+ --ti-rt-channel --lts-4_4
+.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
+ --ti-xenomai-channel --lts-4_4
+== Mainline (4.4.x lts) ==
+.4.x BeagleBone/BeagleBone Black + SGX
+ --bone-kernel --lts-4_4
+.4.x BeagleBone/BeagleBone Black + RT + SGX
+ --bone-rt-kernel --lts-4_4
+== Mainline (4.9.x lts) ==
+.9.x BeagleBone/BeagleBone Black
+ --bone-kernel --lts-4_9
-Testing:
+.9.x BeagleBone/BeagleBone Black + RT
-  ./update_kernel.sh --beta-kernel
+ --bone-rt-kernel --lts-4_9
-Custom: (has to be on rcn-ee.net)
+== Debian 8: jessie ==
-  ./update_kernel.sh --kernel v3.8.13-bone37
+  sudo apt-get install linux-image-armmp
 Reboot with your new Kernel Image.
@@ Line 287: / Line 491: @@
   cd /opt/scripts/tools/graphics/
   ./ti-tilcdc.sh
+== SGX Drivers ==
+=== SGX BeagleBone/BeagleBone Black ===
+Note, these are FBDEV only, no xorg/x11/etc...
+Install the "4.4.x" lts/bone kernel:
+http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29
+Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
+ git clone https://github.com/RobertCNelson/bb-kernel.git
+ cd bb-kernel/
+ git checkout origin/am33x-v4.4 -b tmp-sgx
+ ./sgx_create_package.sh
+Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
+ sudo tar xfv GFX_5.01.01.02.tar.gz -C /
+ cd /opt/gfxinstall/
+ sudo ./sgx-install.sh
+ sudo reboot
+Verify omaplfb & pvrsrvkm loaded
+ debian@arm:~$ lsmod | grep omaplfb
+ omaplfb                12065  0
+ pvrsrvkm              178782  1 omaplfb
 = Building Kernel =

Difference between revisions of "BeagleBoardDebian"

Revision as of 09:51, 7 April 2017

Contents

Help

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Debian NetInstall

Debian 8 (jessie)

Demo Image

Debian (jessie)

Debian Testing (stretch)

Flasher

eMMC: All BeagleBone Varients with eMMC

eMMC: BeagleBoard-X15

raw microSD img

BeagleBoard xM

All BeagleBone Varients

OMAP5432 uEVM

BeagleBoard-X15

Debian Configuration

Install Latest Kernel Image

3.8.x

4.4.x-ti

Mainline (4.4.x lts)

Mainline (4.9.x lts)

Debian 8: jessie

Xorg Drivers

SGX Drivers

SGX BeagleBone/BeagleBone Black

Building Kernel

Beagle/Beagle xM

BeagleBone

BeagleBone Black

Panda/Panda ES

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Navigation menu

Search