Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Building a Native Debian Kernel with QEMU: Removed QEMU from title, should have been deleted in november)
m (2017-04-07)
(449 intermediate revisions by 24 users not shown)
Line 1: Line 1:
 
[[Category: Linux]]
 
[[Category: Linux]]
 
[[Category: OMAP]]
 
[[Category: OMAP]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
[[Category:Development Boards]]
 +
[[Category: BeagleBoard]]
 +
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.  For a more optimized and faster system checkout: [http://mojo.handhelds.org/ Mojo Project] (armv5el & armv6el-vfp editions).  The OMAP3530 on the Beagle Board is armv7-a. See [[BeagleBoardHandheldsMojo|Handhelds Mojo (ARM) at BeagleBoard]] (formerly known as Ubuntu (ARM)) page, too.
+
= Help =
  
= Recommended Kernel =
+
If you need any help:
So like any big document, it's hard to keep everything up to date.  So if your trying Debian/Mojo for the first time, here's what i recommend, (and it's the same thing i'm running on the build beagle.)
 
  
Considered Stable: 2.6.27-oer4 : for lenny http://www.rcn-ee.com/deb/kernel/lenny/v2.6.27-2a3408b-oer4/
+
*Kernel related help:
 +
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 +
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 +
** Kernel Trees
 +
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Uboot: 2008-rc2 or +
+
*When asking for help, please provide some debugging information:
 +
** U-Boot Version installed on board
 +
** Kernel Version: uname -a
 +
** pastebin dmesg
 +
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
  
= Native Install via debian-installer (NON QEMU based) =  
+
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
Note: This install method requires an LCD+usb(keyboard,etc), and uboot 2008-rc2 (Upgrading u-boot (2.6.27's and later)) or later..
+
* http://beagleboard.org/source
  
Testing First Release:
+
= Recommended Beagle Software =
  
==PC: Format SD Card==
+
Mainline U-Boot:
 +
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 +
 
 +
= Debian NetInstall =  
 +
 
 +
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
Starting with an empty SD card and using gparted, create:
+
== Debian 8 (jessie) ==
  50 MiB Primary Partition, fat32
+
 
  Leave remaining space for the Debian-Installer
+
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
 +
 
 +
So For the BeagleBoard xM:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
 +
 
 +
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
 +
 
 +
= Demo Image =
 +
 
 +
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.9.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.4.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (jessie) ==
 +
 
 +
Default username/password:
 +
*username: debian
 +
*password: temppwd
 +
 
 +
Image Updated:
 +
*2017-04-07
 +
** BeagleBoard xM: v4.9.20-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.59-ti-r96 kernel
 +
** OMAP5432 uEVM: v4.4.59-ti-r96 kernel
 +
** BeagleBoard-X15: v4.4.59-ti-r96 kernel
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
 
 +
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
 +
Getty, Serial Port
 +
 
 +
Default user: debian pass: temppwd
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-8.7-console-armhf-2017-04-07.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-8.7-console-armhf-2017-04-07.tar.xz
 +
a76dab3171a6b0299a60a9d8331b982f68ae3b62188e51b6b08be2763b41efdd  debian-8.7-console-armhf-2017-04-07.tar.xz
 +
 
 +
Unpack Image:
 +
tar xf debian-8.7-console-armhf-2017-04-07.tar.xz
 +
cd debian-8.7-console-armhf-2017-04-07
 +
 
 +
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
 +
 
 +
You should see something like:
 +
 
 +
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
  └─sdd2  8:50   1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 +
 
 +
Install Image:
 +
 
 +
Quick install script for [board]
 +
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 +
 
 +
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Varients          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
 +
 
 +
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 +
 
 +
Advanced: Build Image:
 +
 
 +
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2017.04 -b tmp
 +
 
 +
Stable:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
 +
 
 +
Testing:
 +
 
 +
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 +
 
 +
== Debian Testing (stretch) ==
 +
 
 +
Image Updated:
 +
*2017-04-07
 +
** BeagleBoard xM: v4.9.20-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.59-ti-r96 kernel
 +
** OMAP5432 uEVM: v4.4.59-ti-r96 kernel
 +
** BeagleBoard-X15: v4.4.59-ti-r96 kernel
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 +
 
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-stretch-console-armhf-2017-04-07.tar.xz
 +
 
 +
Verify Image with:
 +
sha256sum debian-stretch-console-armhf-2017-04-07.tar.xz
 +
998b4fca4d6f232d72f227a286bdad44c0a40bb794904249330f6776ad628fa0  debian-stretch-console-armhf-2017-04-07.tar.xz
 +
 
 +
Unpack image:
 +
tar xf debian-stretch-console-armhf-2017-04-07.tar.xz
 +
cd debian-stretch-console-armhf-2017-04-07
 +
 
 +
Then follow the directions shown above with the other images...
 +
 
 +
= Flasher =
 +
 
 +
== eMMC: All BeagleBone Varients with eMMC ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
==PC: Setup SD uboot Partition==
+
This script will only take about 5-6 Minutes after power on.
  
Mount your SD card fat32 partition. (/media/disk/)
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
cd /media/disk/
+
User: debian
wget http://www.rcn-ee.com/deb/kernel/CC-v2.6.27-2a3408b-oer4
+
pass: temppwd
wget http://ftp.nl.debian.org/debian/dists/testing/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
mv CC-v2.6.27-2a3408b-oer4 uImage
 
gzip -d initrd.gz
 
dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
  
---- Does this have been test? The initrd.gz is invalid ramdisk file ....
+
Image Updated:
-- This should really be under discussion, please delete (question and my answer) after posting to beagleboard mailing list. What error are you getting? This was originally written and tested in mid November, files haven't changed since then. The 'initrd.gz' linked contains the debian-installer ramdisk image, however it must be modified to correctly work on the beagleboard's uboot.  Hence the 'gzip -d' to uncompress it and the 'dd', to pad it to specific memory size. (uboot 2008-10-rc1 or 2008-10 editions along with the specific uboot strings listed in the next session are required to successfully use the 'debian-installer') RCN
+
*2017-04-07
 +
** All BeagleBone Varients with eMMC: v4.4.59-ti-r96 kernel
 +
*2017-03-09
 +
** All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
  
==Beagleboard==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-04-07/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
Mount SD card
+
Verify Image with:
  setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+
  sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
setenv bootargs 'console=ttyS2,115200n8 console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M video=omapfb:mode:1280x720@60'
+
  fdcf012f4dd773fbbf66f3a97da1e35cc3a3b444b1195a0ea8380d61936a3145 BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  saveenv
 
  boot
 
  
The debian-installer should load via the framebuffer, if the screen remains blank, try different resolutions for the bootargs:
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
video=omapfb:mode:1280x720@60
+
Linux: (dd)
  Modes:
+
  xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
"640x480@60""800x600@60""1024x768@60""1280x720@60"480p60""576p50""720p50""720p60""1080p24""1080p25""1080p30",
 
  
Continue the install without loading kernel modules? : <yes>
+
== eMMC: BeagleBoard-X15 ==
  
DON'T Select "Guided - use entire disk" <- Loose the fat boot partition.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
Recommended: Select Guided - Use the largest continuous free space
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Example:
+
This script will only take about 5-6 Minutes after power on.
Partition #2 of SCSI1 (0,0,0) (sda) as ext3
 
Partition #5 of SCSI1 (0,0,0) (sda) as swap
 
  
Continue without installing a kernel? : <yes>
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Standard System
+
User: debian
 +
pass: temppwd
  
No BootLoader: <ok>
+
Image Updated:
 +
*2017-04-07
 +
** BeagleBoard-X15: v4.4.59-ti-r96 kernel
 +
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
  
==Install complete==
+
Get prebuilt image:
Reboot (aka remove power)
+
wget https://rcn-ee.com/rootfs/2017-04-07/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
Uboot update bootcmd & bootargs
+
Verify Image with:
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
  sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
  setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:mode:1280x720@60'
+
  f2db385c72216da54754d1470738b5ede2f8146ab3c7da01976f15d59e26dddf bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  saveenv
 
  boot
 
  
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
==Login & Install kernel-image==
+
Linux: (dd)
 +
xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  
cd /home/<user>
+
= raw microSD img =
sudo apt-get install uboot-mkimage
 
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-image-2.6.27-oer4_1.0lenny_armel.deb
 
sudo dpkg -i linux-image*
 
  
Extract linux-image's vmlinuz-*
+
== BeagleBoard xM ==
dpkg -x linux-image* ./temp
 
  
Mount fat32 partition
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
sudo mount /dev/mmcblk0p1 /mnt
 
  
Build uboot compatible image and copy to fat32 boot partition
+
User: debian
sudo mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-*  /mnt/uImage
+
pass: temppwd
  
Clean up
+
Auto partition resize:
  rm -rfd temp
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Sync, umount Partitions and Reboot
+
Image Updated:
 +
*2017-04-07
 +
** BeagleBoard xM: v4.9.20-armv7-x4 kernel
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
  
= QEMU install method via debian-installer (emulated arm core via Desktop PC)=
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
+
Verify Image with:
  apt-get install qemu
+
sha256sum bbxm-debian-8.7-console-armhf-2017-04-07-2gb*
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
+
  934303e755677854c958e33319f7c80d9f26fd3bb788d1eb971ea8e134035726  bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
==Format SD Card==
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
You will need a 1GB SD card or greater.
+
Linux: (dd)
  Standard System : ~455MB
+
xzcat bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  + Desktop environment (GNOME) : ~2.9GB
+
 
 +
== All BeagleBone Varients ==
 +
 
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
 +
 
 +
User: debian
 +
pass: temppwd
 +
 
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
  git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 
 +
Image Updated:
 +
*2017-04-07
 +
** All BeagleBone Varients: v4.4.59-ti-r96 kernel
 +
*2017-03-09
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
 
 +
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
 +
 
 +
Verify Image with:
 +
sha256sum bone-debian-8.7-console-armhf-2017-04-07-2gb*
 +
e85bca49efaa2ba22f023c3c435c87297419f902d79ee79468c0eb1414b01671  bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
Starting with an empty SD card and using gparted, create:
+
Windows/Mac/Linux gui
  50 MiB Primary Partition, fat32
+
  http://etcher.io
Leave remaining space for the Debian-Installer
 
  
==Preparation==
+
Linux: (dd)
 +
xzcat bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  
Create a working directory to keep your files organized.
+
== OMAP5432 uEVM ==
  
mkdir debian-armel
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
cd debian-armel/
 
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.26-1-versatile
 
  
==Install Debian==
+
User: debian
 +
pass: temppwd
  
Quick Note: Debian Lenny is undergoing Beta/RC testing so these debian installers are currently way out of date, so it will tell you their are unavailable kernel modules, just ignore the question and continue. These modules will be provided later, with the provided linux-image deb.
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
To install (ARM EABI) Debian inside QEMU:
+
Image Updated:
 +
*2017-04-07
 +
** OMAP5432 uEVM: v4.4.59-ti-r96 kernel
 +
*2017-03-09
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
  
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-1-versatile -initrd initrd.gz -m 256 -hda /dev/sdX -append "root=/dev/ram mem=256M"
+
Get prebuilt image:
Note: root/sudo access is required to access /dev/sde directly & verify /dev/sdX with fdisk -l
+
  wget https://rcn-ee.com/rootfs/2017-04-07/microsd/omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
Partition disks, default settings should work for most: Guided - use the largest continuous free space
+
Verify Image with:
 +
sha256sum omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb*
 +
562130678f137ecb09b36d602f666e20cf3d2673964d43a2497b216522288b43  omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
[[Image:Beagleboarddebian-partitiondisk.png]]
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
==Running Debian==
+
Linux: (dd)
 +
xzcat omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
  
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-1-versatile -m 256 -hda /dev/sdX -append "root=/dev/sda2 mem=256M"
+
== BeagleBoard-X15 ==
  
Note: Time will be incorrect.  
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
sudo apt-get install ntpdate
+
User: debian
ntpdate pool.ntp.org
+
pass: temppwd
  
Install default deb packages for linux-image & linux-headers.
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Stable  2.6.27
+
Image Updated:
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-image-2.6.27-oer4_1.0lenny_armel.deb
+
*2017-04-07
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-headers-2.6.27-oer4_1.0lenny_armel.deb
+
** BeagleBoard-X15: v4.4.59-ti-r96 kernel
sudo dpkg -i *.deb
+
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
  
Note: It's easier to download these straight to the sd card after you've mounted the SD card to copy uImage to the FAT partition.
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
=== Linux Kernel Preparation ===
+
Verify Image with:
 +
sha256sum bbx15-debian-8.7-console-armhf-2017-04-07-2gb*
 +
41524001ccf7ca5f79ef3bc17f7d03f8bd1c424333cf46c6dcd214300b9ff5b7  bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz
  
Install uboot-mkimage utility
+
Windows/Mac/Linux gui
  sudo apt-get install uboot-mkimage
+
  http://etcher.io
  
Remount SD card, Ubuntu remounts SD card like this:
+
Linux: (dd)
  /media/disk/ <fat32>
+
  xzcat bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
/media/disk-1/ <ext3>
 
  
Download Kernel-Image
+
= Debian Configuration =
cd /media/disk-1/home/<user>/
 
wget http://www.rcn-ee.com/deb/lenny/v2.6.27-2a3408b-oer4/linux-image-2.6.27-oer4_1.0lenny_armel.deb
 
  
Extract linux-image's vmlinuz-*
+
==Install Latest Kernel Image==
dpkg -x linux-image* ./temp
 
  
Build uboot compatiable image and copy to /media/disk/ <fat32 boot partition>
+
General apt syntax for searching and installing a specific kernel:
  mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-* /media/disk/uImage
+
  sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
  sudo reboot
  
Clean up
+
Latest kernel script
  rm -rfd temp
+
  cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
Sync, umount Partitions and Install sd card in beagleboard
+
== 3.8.x ==
 +
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
  
=Beagleboard First Boot, uboot, general notes=
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
 +
--bone-channel --stable
  
Insert SD Card and power up Beagleboard.
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
 +
--bone-xenomai-channel --stable
  
==Boot==
+
== 4.4.x-ti ==
 +
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
  
Using a terminal program, stop u-boot and add these commands:
+
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
  --ti-channel --lts-4_4
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:mode:1280x720@60'
 
  saveenv
 
boot
 
  
  video=omapfb:mode:1280x720@60
+
  4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
  Modes:
+
  --ti-rt-channel --lts-4_4
"640x480@60""800x600@60""1024x768@60""1280x720@60"480p60""576p50""720p50""720p60""1080p24""1080p25""1080p30",
 
  
The Beagleboard will reboot 3-4 times while the ext3 filesystem is repaired. (may have to remove power etc)
+
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
 +
--ti-xenomai-channel --lts-4_4
  
=== Upgrading u-boot (2.6.27's and later) ===
+
== Mainline (4.4.x lts) ==
  
Using gparted, create a new 50MB Primary fat32 Parition on blank SD card.
+
4.4.x BeagleBone/BeagleBone Black + SGX
 +
--bone-kernel --lts-4_4
  
  wget http://www.angstrom-distribution.org/demo/beagleboard/u-boot.bin
+
  4.4.x BeagleBone/BeagleBone Black + RT + SGX
  cp u-boot.bin /media/disk
+
  --bone-rt-kernel --lts-4_4
  
uboot
+
== Mainline (4.9.x lts) ==
mmcinit
 
fatload mmc 0 0x80200000 u-boot.bin
 
nand unlock
 
nand ecc sw
 
nand erase 80000 160000
 
nand write.i 0x80200000 80000 160000
 
reset
 
  
==Debian on Beagleboard==
+
4.9.x BeagleBone/BeagleBone Black
 +
--bone-kernel --lts-4_9
  
Debian on BeagleBoard uses the following configuration:
+
4.9.x BeagleBone/BeagleBone Black + RT
 +
--bone-rt-kernel --lts-4_9
  
* Console log = Serial Terminal
+
== Debian 8: jessie ==
* User Console = HDMI port + usb (keyboard, mouse, etc)
+
sudo apt-get install linux-image-armmp
  
If you want to log in with the serial port, you will have to add to /etc/inittab
+
Reboot with your new Kernel Image.
  S:2345:respawn:/sbin/getty 115200 ttyS2
 
  
And if you want to log in as root on the serial port, add ttyS2 to /etc/securetty.
+
== Xorg Drivers ==
  
===Xorg===
+
Script:
Modify /etc/X11/xorg.conf
+
cd /opt/scripts/tools/
Section "Device"
+
  git pull
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
  EndSection
 
  
[[Image:Beagleboarddebian-GNOME.jpg]]
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Note: 'fbdev' is normally *slow* since it completely relies on the system cpu to update the framebuffer. Once the video processing core's driver is released this will no longer be an issue.
+
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
=Current Issues=
+
== SGX Drivers ==
  
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
+
=== SGX BeagleBone/BeagleBone Black ===
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue date MMDDHHMMYYYY
 
  
=Building a Native Debian Kernel=
+
Note, these are FBDEV only, no xorg/x11/etc...
  
Note, these are just general build hints.
+
Install the "4.4.x" lts/bone kernel:
 +
http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29
  
==Install Dependencies==
+
Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
   
+
  git clone https://github.com/RobertCNelson/bb-kernel.git
  apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev
+
  cd bb-kernel/
 +
git checkout origin/am33x-v4.4 -b tmp-sgx
 +
./sgx_create_package.sh
  
==u-boot==
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
 +
sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 +
cd /opt/gfxinstall/
 +
sudo ./sgx-install.sh
 +
sudo reboot
  
There is a debian package for this now:
+
Verify omaplfb & pvrsrvkm loaded
  apt-get install uboot-mkimage
+
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
  pvrsrvkm              178782  1 omaplfb
  
If you must build from upstream:
+
= Building Kernel =
wget -nc http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
 
tar -xf u-boot_beagle_revb.tar.gz
 
cd u-boot/
 
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3530beagle_config
 
make CROSS_COMPILE= tools
 
  
Add /tools/ to $PATH
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
PATH=/home/<user>/u-boot/tools:"${PATH}"
 
  
==Linux Kernel==
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
  git clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
== BeagleBone ==
cd linux-omap-2.6/
+
  http://eewiki.net/display/linuxonarm/BeagleBone
git checkout -b beagle <tag>
 
  
Patch Kernel as you see fit
+
== BeagleBone Black ==
  patch -p1 < ../patches/*.patch
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Setup Kernel .config
+
== Panda/Panda ES ==
make CROSS_COMPILE= distclean
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  make CROSS_COMPILE= omap3_beagle_defconfig
 
  
Create Debian linux-image* & linux-headers* Package
+
= Upgrading from Debian 5 to Debian 6 =
make-kpkg --cross_compile - clean
 
CONCURRENCY_LEVEL=1 fakeroot make-kpkg --cross_compile - --initrd kernel_image kernel_headers
 
  
Create U-boot uImage
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
make CROSS_COMPILE= uImage
 
  
= Deb Builder =
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
  
Auto builds for lenny, sid, and mojo's; linux-image and linux-headers's in appropriate schroot's.
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
  
[http://www.rcn-ee.com/deb/kernel/ Latest Images]
+
sudo apt-get update ; sudo apt-get upgrade
[http://www.rcn-ee.com/deb/kernel/changes.txt Changelog]
+
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
  sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Revision as of 09:51, 7 April 2017

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.9.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2017-04-07
    • BeagleBoard xM: v4.9.20-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.59-ti-r96 kernel
    • OMAP5432 uEVM: v4.4.59-ti-r96 kernel
    • BeagleBoard-X15: v4.4.59-ti-r96 kernel
  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-8.7-console-armhf-2017-04-07.tar.xz

Verify Image with:

sha256sum debian-8.7-console-armhf-2017-04-07.tar.xz
a76dab3171a6b0299a60a9d8331b982f68ae3b62188e51b6b08be2763b41efdd  debian-8.7-console-armhf-2017-04-07.tar.xz

Unpack Image:

tar xf debian-8.7-console-armhf-2017-04-07.tar.xz
cd debian-8.7-console-armhf-2017-04-07

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.04 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2017-04-07
    • BeagleBoard xM: v4.9.20-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.59-ti-r96 kernel
    • OMAP5432 uEVM: v4.4.59-ti-r96 kernel
    • BeagleBoard-X15: v4.4.59-ti-r96 kernel
  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/elinux/debian-stretch-console-armhf-2017-04-07.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2017-04-07.tar.xz
998b4fca4d6f232d72f227a286bdad44c0a40bb794904249330f6776ad628fa0  debian-stretch-console-armhf-2017-04-07.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2017-04-07.tar.xz
cd debian-stretch-console-armhf-2017-04-07

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-04-07
    • All BeagleBone Varients with eMMC: v4.4.59-ti-r96 kernel
  • 2017-03-09
    • All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/flasher/BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
fdcf012f4dd773fbbf66f3a97da1e35cc3a3b444b1195a0ea8380d61936a3145  BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-04-07
    • BeagleBoard-X15: v4.4.59-ti-r96 kernel
  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/flasher/bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb*
f2db385c72216da54754d1470738b5ede2f8146ab3c7da01976f15d59e26dddf  bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-04-07
    • BeagleBoard xM: v4.9.20-armv7-x4 kernel
  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.7-console-armhf-2017-04-07-2gb*
934303e755677854c958e33319f7c80d9f26fd3bb788d1eb971ea8e134035726  bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-04-07
    • All BeagleBone Varients: v4.4.59-ti-r96 kernel
  • 2017-03-09
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.7-console-armhf-2017-04-07-2gb*
e85bca49efaa2ba22f023c3c435c87297419f902d79ee79468c0eb1414b01671  bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-04-07
    • OMAP5432 uEVM: v4.4.59-ti-r96 kernel
  • 2017-03-09
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb*
562130678f137ecb09b36d602f666e20cf3d2673964d43a2497b216522288b43  omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-04-07
    • BeagleBoard-X15: v4.4.59-ti-r96 kernel
  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.7-console-armhf-2017-04-07-2gb*
41524001ccf7ca5f79ef3bc17f7d03f8bd1c424333cf46c6dcd214300b9ff5b7  bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.7-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_4

Mainline (4.4.x lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_9

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29

Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.4 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade