Difference between revisions of "BeagleBoardDebian"
m (add more lenny 'armel' vs etch 'arm' tweaks for qemu..) |
m (2017-09-14) |
||
(546 intermediate revisions by 32 users not shown) | |||
Line 1: | Line 1: | ||
[[Category: Linux]] | [[Category: Linux]] | ||
[[Category: OMAP]] | [[Category: OMAP]] | ||
+ | [[Category:Development Boards]] | ||
+ | [[Category: BeagleBoard]] | ||
+ | This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle. | ||
− | + | = Help = | |
− | + | If you need any help: | |
− | + | *Kernel related help: | |
+ | ** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method | ||
+ | ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ||
+ | ** Kernel Trees | ||
+ | *** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.12.x kernel branch] | ||
+ | *** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone] | ||
+ | *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | ||
− | + | *When asking for help, please provide some debugging information: | |
− | + | ** U-Boot Version installed on board | |
+ | ** Kernel Version: uname -a | ||
+ | ** pastebin dmesg | ||
+ | *** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit) | ||
− | == | + | = Official BeagleBoard.org Images for shipping with BeagleBone Black = |
+ | * http://beagleboard.org/source | ||
− | + | = Recommended Beagle Software = | |
− | + | Mainline U-Boot: | |
+ | * All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions. | ||
+ | * XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition | ||
+ | * Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot] | ||
− | + | = Debian NetInstall = | |
− | + | Scripts: | |
− | + | git clone https://github.com/RobertCNelson/netinstall.git | |
− | + | cd netinstall | |
− | + | ||
+ | Device Options: | ||
+ | BeagleBoard --dtb omap3-beagle | ||
+ | BeagleBoard-xM --dtb omap3-beagle-xm | ||
+ | BeagleBoard-X15 --dtb am57xx-beagle-x15 | ||
+ | BeagleBone (serial) --dtb am335x-bone-serial | ||
+ | BeagleBone (video via cape) --dtb am335x-bone-video | ||
+ | BeagleBone Black --dtb am335x-boneblack | ||
+ | PandaBoard (A1->A3) --dtb omap4-panda | ||
+ | PandaBoard (A4->Ax) --dtb omap4-panda-a4 | ||
+ | PandaBoard ES --dtb omap4-panda-es | ||
+ | |||
+ | You will need a 1GB SD card or greater. | ||
+ | Standard System : ~455MB | ||
+ | |||
+ | == Debian 9 (stretch) == | ||
+ | |||
+ | Quick Install script for "board" | ||
+ | sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch | ||
+ | |||
+ | So For the BeagleBoard xM: | ||
+ | sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch | ||
+ | |||
+ | *Options: | ||
+ | **--firmware : installs firmware | ||
+ | **--serial-mode : debian-installer uses Serial Port | ||
+ | |||
+ | = Demo Image = | ||
+ | |||
+ | * '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform | ||
+ | git clone https://github.com/RobertCNelson/armv7-multiplatform.git | ||
+ | cd armv7-multiplatform | ||
+ | git checkout origin/v4.13.x -b tmp | ||
+ | ./build_kernel.sh | ||
+ | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y | ||
+ | git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git | ||
+ | cd ti-linux-kernel-dev | ||
+ | git checkout origin/ti-linux-4.4.y -b tmp | ||
+ | ./build_kernel.sh | ||
+ | |||
+ | == Debian (stretch) == | ||
+ | |||
+ | Default username/password: | ||
+ | *username: debian | ||
+ | *password: temppwd | ||
+ | |||
+ | Image Updated: | ||
+ | *2017-09-14 | ||
+ | ** BeagleBoard xM: v4.13.2-armv7-x1 kernel | ||
+ | ** All BeagleBone Varients: v4.4.87-ti-r121 kernel | ||
+ | ** OMAP5432 uEVM: v4.4.87-ti-r121 kernel | ||
+ | ** BeagleBoard-X15: v4.4.87-ti-r121 kernel | ||
+ | *2017-08-11 | ||
+ | ** BeagleBoard xM: v4.12.5-armv7-x3 kernel | ||
+ | ** All BeagleBone Varients: v4.4.80-ti-r116 kernel | ||
+ | ** OMAP5432 uEVM: v4.4.80-ti-r116 kernel | ||
+ | ** BeagleBoard-X15: v4.4.80-ti-r116 kernel | ||
+ | *2017-07-14 | ||
+ | ** BeagleBoard xM: v4.12.1-armv7-x2 kernel | ||
+ | ** All BeagleBone Varients: v4.4.68-ti-r111 kernel | ||
+ | ** OMAP5432 uEVM: v4.4.68-ti-r111 kernel | ||
+ | ** BeagleBoard-X15: v4.4.68-ti-r111 kernel | ||
+ | |||
+ | Services Active: | ||
+ | Note: Depending on your internal network these may work out of the box | ||
+ | Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 | ||
+ | SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2 | ||
+ | Getty, Serial Port | ||
+ | |||
+ | Default user: debian pass: temppwd | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/elinux/debian-9.1-console-armhf-2017-09-14.tar.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum debian-9.1-console-armhf-2017-09-14.tar.xz | ||
+ | 6d515158af0d3bc234ff56bf6a0b332ff8d4540ef0a3d224dd4969bc5260a499 debian-9.1-console-armhf-2017-09-14.tar.xz | ||
+ | |||
+ | Unpack Image: | ||
+ | tar xf debian-9.1-console-armhf-2017-09-14.tar.xz | ||
+ | cd debian-9.1-console-armhf-2017-09-14 | ||
+ | |||
+ | If you don't know the location of your SD card: | ||
+ | sudo ./setup_sdcard.sh --probe-mmc | ||
+ | |||
+ | You should see something like: | ||
+ | |||
+ | Are you sure? I don't see [/dev/idontknow], here is what I do see... | ||
− | + | fdisk -l: | |
− | /dev/ | + | Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive''' |
− | / | + | Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card''' |
− | + | ||
− | /dev/ | + | lsblk: |
+ | NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT | ||
+ | sda 8:0 0 465.8G 0 disk | ||
+ | ├─sda1 8:1 0 446.9G 0 part / '''<- x86 Root Partition''' | ||
+ | ├─sda2 8:2 0 1K 0 part | ||
+ | └─sda5 8:5 0 18.9G 0 part [SWAP] | ||
+ | sdd 8:48 1 3.7G 0 disk | ||
+ | ├─sdd1 8:49 1 64M 0 part | ||
+ | └─sdd2 8:50 1 3.6G 0 part | ||
+ | |||
+ | * In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh... | ||
+ | |||
+ | Install Image: | ||
− | + | Quick install script for [board] | |
+ | sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board | ||
− | + | board options: | |
+ | *BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle | ||
+ | *BeagleBoard xM - omap3-beagle-xm | ||
+ | *All BeagleBone Varients - beaglebone | ||
+ | *OMAP5432 uEVM - omap5-uevm | ||
+ | *BeagleBoard-X15 - am57xx-beagle-x15 | ||
− | + | So for the BeagleBoard xM: | |
− | + | sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | Advanced: Build Image: | |
− | + | git clone https://github.com/RobertCNelson/omap-image-builder.git | |
+ | cd omap-image-builder | ||
+ | git checkout v2017.09 -b tmp | ||
− | + | Stable: | |
− | |||
− | |||
− | |||
− | |||
− | + | ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf | |
− | + | Testing: | |
− | + | ./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf | |
− | sudo | + | |
− | + | == Debian Testing (buster) == | |
− | sudo | + | |
− | + | Image Updated: | |
− | + | *2017-09-14 | |
+ | ** BeagleBoard xM: v4.13.2-armv7-x1 kernel | ||
+ | ** All BeagleBone Varients: v4.4.87-ti-r121 kernel | ||
+ | ** OMAP5432 uEVM: v4.4.87-ti-r121 kernel | ||
+ | ** BeagleBoard-X15: v4.4.87-ti-r121 kernel | ||
+ | *2017-08-11 | ||
+ | ** BeagleBoard xM: v4.12.5-armv7-x3 kernel | ||
+ | ** All BeagleBone Varients: v4.4.80-ti-r116 kernel | ||
+ | ** OMAP5432 uEVM: v4.4.80-ti-r116 kernel | ||
+ | ** BeagleBoard-X15: v4.4.80-ti-r116 kernel | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/elinux/debian-buster-console-armhf-2017-09-14.tar.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum debian-buster-console-armhf-2017-09-14.tar.xz | ||
+ | 7ca7e51948a2c587523741f19a20c27ea5d9c96d9d5f4aed4326aec451a4b50e debian-buster-console-armhf-2017-09-14.tar.xz | ||
+ | |||
+ | Unpack image: | ||
+ | tar xf debian-buster-console-armhf-2017-09-14.tar.xz | ||
+ | cd debian-buster-console-armhf-2017-09-14 | ||
+ | |||
+ | Then follow the directions shown above with the other images... | ||
+ | |||
+ | = Flasher = | ||
+ | |||
+ | == eMMC: All BeagleBone Varients with eMMC == | ||
+ | |||
+ | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | ||
+ | |||
+ | Script for reference: (this is the script that writes to the eMMC) | ||
+ | https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh | ||
+ | |||
+ | This script will only take about 5-6 Minutes after power on. | ||
+ | |||
+ | Notes: | ||
+ | * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected. | ||
+ | * If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again. | ||
+ | |||
+ | User: debian | ||
+ | pass: temppwd | ||
+ | |||
+ | Image Updated: | ||
+ | *2017-09-14 | ||
+ | ** All BeagleBone Varients with eMMC: v4.4.87-ti-r121 kernel | ||
+ | *2017-08-11 | ||
+ | ** All BeagleBone Varients with eMMC: v4.4.80-ti-r116 kernel | ||
+ | *2017-07-14 | ||
+ | ** All BeagleBone Varients with eMMC: v4.4.68-ti-r111 kernel | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/flasher/BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb* | ||
+ | 64ac7c4aede254e84762bd2a0d58d4fd3cc246703d37ff0cda76124266e342a1 BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
+ | |||
+ | Linux: (dd) | ||
+ | xzcat BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX | ||
+ | |||
+ | == eMMC: BeagleBoard-X15 == | ||
+ | |||
+ | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | ||
+ | |||
+ | Script for reference: (this is the script that writes to the eMMC) | ||
+ | https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh | ||
+ | |||
+ | This script will only take about 5-6 Minutes after power on. | ||
+ | |||
+ | Notes: | ||
+ | * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected. | ||
+ | * If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again. | ||
+ | |||
+ | User: debian | ||
+ | pass: temppwd | ||
+ | |||
+ | Image Updated: | ||
+ | *2017-09-14 | ||
+ | ** BeagleBoard-X15: v4.4.87-ti-r121 kernel | ||
+ | *2017-08-11 | ||
+ | ** BeagleBoard-X15: v4.4.80-ti-r116 kernel | ||
+ | *2017-07-14 | ||
+ | ** BeagleBoard-X15: v4.4.68-ti-r111 kernel | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/flasher/bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb* | ||
+ | 835abde3870f34c0881bbbfefcf4f0ef4f0d4da83073e0c0e7619c028f34eed9 bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
+ | |||
+ | Linux: (dd) | ||
+ | xzcat bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX | ||
+ | |||
+ | = raw microSD img = | ||
+ | |||
+ | == BeagleBoard xM == | ||
+ | |||
+ | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io | ||
+ | |||
+ | User: debian | ||
+ | pass: temppwd | ||
+ | |||
+ | Auto partition resize: | ||
+ | cd /opt/scripts/tools | ||
+ | git pull | ||
+ | ./grow_partition.sh | ||
+ | sudo reboot | ||
+ | |||
+ | Image Updated: | ||
+ | *2017-09-14 | ||
+ | ** BeagleBoard xM: v4.13.2-armv7-x1 kernel | ||
+ | *2017-08-11 | ||
+ | ** BeagleBoard xM: v4.12.5-armv7-x3 kernel | ||
+ | *2017-07-14 | ||
+ | ** BeagleBoard xM: v4.12.1-armv7-x2 kernel | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/microsd/bbxm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum bbxm-debian-9.1-console-armhf-2017-09-14-2gb* | ||
+ | 563d070958dfde28532d359e9fdb7c7b43ed2a3d4013b262ca036cf4c7a08996 bbxm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
+ | |||
+ | Linux: (dd) | ||
+ | xzcat bbxm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX | ||
+ | |||
+ | == All BeagleBone Varients == | ||
+ | |||
+ | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io | ||
+ | |||
+ | User: debian | ||
+ | pass: temppwd | ||
+ | |||
+ | Auto partition resize: | ||
+ | cd /opt/scripts/tools | ||
+ | git pull | ||
+ | ./grow_partition.sh | ||
+ | sudo reboot | ||
+ | |||
+ | Image Updated: | ||
+ | *2017-09-14 | ||
+ | ** All BeagleBone Varients: v4.4.87-ti-r121 kernel | ||
+ | *2017-08-11 | ||
+ | ** All BeagleBone Varients: v4.4.80-ti-r116 kernel | ||
+ | *2017-07-14 | ||
+ | ** All BeagleBone Varients: v4.4.68-ti-r111 kernel | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/microsd/bone-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum bone-debian-9.1-console-armhf-2017-09-14-2gb* | ||
+ | 8168bbca7f1d9540e2a92934b6f8f483f293139fbb89393a3104ed0f9ca2da23 bone-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
+ | |||
+ | Linux: (dd) | ||
+ | xzcat bone-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX | ||
+ | |||
+ | == OMAP5432 uEVM == | ||
+ | |||
+ | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io | ||
+ | |||
+ | User: debian | ||
+ | pass: temppwd | ||
+ | |||
+ | Auto partition resize: | ||
+ | cd /opt/scripts/tools | ||
+ | git pull | ||
+ | ./grow_partition.sh | ||
+ | sudo reboot | ||
+ | |||
+ | Image Updated: | ||
+ | *2017-09-14 | ||
+ | ** OMAP5432 uEVM: v4.4.87-ti-r121 kernel | ||
+ | *2017-08-11 | ||
+ | ** OMAP5432 uEVM: v4.4.80-ti-r116 kernel | ||
+ | *2017-07-14 | ||
+ | ** OMAP5432 uEVM: v4.4.68-ti-r111 kernel | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/microsd/omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb* | ||
+ | e9cae0d90f00f48455dab5d46e69413fa50fb707bdf8ab9e97bd871318b0f4f7 omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
+ | |||
+ | Linux: (dd) | ||
+ | xzcat omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX | ||
+ | |||
+ | == BeagleBoard-X15 == | ||
+ | |||
+ | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io | ||
+ | |||
+ | User: debian | ||
+ | pass: temppwd | ||
+ | |||
+ | Auto partition resize: | ||
+ | cd /opt/scripts/tools | ||
+ | git pull | ||
+ | ./grow_partition.sh | ||
+ | sudo reboot | ||
+ | |||
+ | Image Updated: | ||
+ | *2017-09-14 | ||
+ | ** BeagleBoard-X15: v4.4.87-ti-r121 kernel | ||
+ | *2017-08-11 | ||
+ | ** BeagleBoard-X15: v4.4.80-ti-r116 kernel | ||
+ | *2017-07-14 | ||
+ | ** BeagleBoard-X15: v4.4.68-ti-r111 kernel | ||
+ | |||
+ | Get prebuilt image: | ||
+ | wget https://rcn-ee.com/rootfs/2017-09-14/microsd/bbx15-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Verify Image with: | ||
+ | sha256sum bbx15-debian-9.1-console-armhf-2017-09-14-2gb* | ||
+ | 5cd101f4d144c60fd6012ff8c411e3fa3481b2e44d9c7fdc44dc09b042800306 bbx15-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | ||
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
+ | |||
+ | Linux: (dd) | ||
+ | xzcat bbx15-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX | ||
+ | |||
+ | = Debian Configuration = | ||
+ | |||
+ | ==Install Latest Kernel Image== | ||
+ | |||
+ | General apt syntax for searching and installing a specific kernel: | ||
+ | sudo apt-get update | ||
+ | sudo apt-cache search linux-image | grep <branch> | ||
+ | sudo apt-get install linux-image-<specific version> | ||
+ | sudo reboot | ||
− | + | Latest kernel script | |
− | + | cd /opt/scripts/tools/ | |
− | + | git pull | |
− | + | sudo ./update_kernel.sh <OPTIONS> | |
− | + | == 3.8.x == | |
+ | This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy | ||
+ | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8 | ||
− | + | 3.8.x BeagleBone/BeagleBone Black FULL Cape Support | |
− | + | --bone-channel --stable | |
− | + | 3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai | |
+ | --bone-xenomai-channel --stable | ||
− | + | == 4.4.x-ti == | |
+ | This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled. | ||
+ | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4 | ||
+ | Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y | ||
− | + | 4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 | |
+ | --ti-channel --lts-4_4 | ||
− | + | 4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT | |
+ | --ti-rt-channel --lts-4_4 | ||
− | + | 4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai | |
− | + | --ti-xenomai-channel --lts-4_4 | |
− | |||
− | + | == Mainline (4.4.x lts) == | |
− | + | 4.4.x BeagleBone/BeagleBone Black + SGX | |
− | + | --bone-kernel --lts-4_4 | |
− | |||
− | |||
− | + | 4.4.x BeagleBone/BeagleBone Black + RT + SGX | |
+ | --bone-rt-kernel --lts-4_4 | ||
− | + | == Mainline (4.9.x lts) == | |
− | + | 4.9.x BeagleBone/BeagleBone Black | |
− | + | --bone-kernel --lts-4_9 | |
− | + | 4.9.x BeagleBone/BeagleBone Black + RT | |
+ | --bone-rt-kernel --lts-4_9 | ||
− | + | == Debian 9: stretch == | |
− | + | sudo apt-get install linux-image-armmp | |
− | + | Reboot with your new Kernel Image. | |
− | + | == Xorg Drivers == | |
− | + | Script: | |
+ | cd /opt/scripts/tools/ | ||
+ | git pull | ||
− | + | BeagleBoard/PandaBoard: | |
− | + | cd /opt/scripts/tools/graphics/ | |
+ | ./ti-omapdrm.sh | ||
− | + | BeagleBone/BeagleBone Black: | |
− | + | cd /opt/scripts/tools/graphics/ | |
− | + | ./ti-tilcdc.sh | |
− | |||
− | |||
− | |||
− | |||
− | + | == SGX Drivers == | |
− | |||
− | + | === SGX BeagleBone/BeagleBone Black === | |
− | |||
− | + | Note, these are FBDEV only, no xorg/x11/etc... | |
− | |||
− | + | Install the "4.4.x" lts/bone kernel: | |
− | + | http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29 | |
− | |||
− | + | Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor) | |
+ | git clone https://github.com/RobertCNelson/bb-kernel.git | ||
+ | cd bb-kernel/ | ||
+ | git checkout origin/am33x-v4.4 -b tmp-sgx | ||
+ | ./sgx_create_package.sh | ||
− | + | Copy ./deploy/GFX_5.01.01.02_es8.x.tar.gz to BeagleBone/BeagleBone Black and install | |
− | + | sudo tar xfv GFX_5.01.01.02_es8.x.tar.gz -C / | |
− | cd | + | cd /opt/gfxinstall/ |
− | + | sudo ./sgx-install.sh | |
− | + | sudo reboot | |
− | |||
− | |||
− | + | Verify omaplfb & pvrsrvkm loaded | |
− | + | debian@arm:~$ lsmod | grep omaplfb | |
+ | omaplfb 12065 0 | ||
+ | pvrsrvkm 178782 1 omaplfb | ||
− | + | = Building Kernel = | |
− | |||
− | |||
− | |||
− | Note | + | Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages: |
− | + | == Beagle/Beagle xM == | |
− | + | http://eewiki.net/display/linuxonarm/BeagleBoard | |
− | == | + | == BeagleBone == |
+ | http://eewiki.net/display/linuxonarm/BeagleBone | ||
− | + | == BeagleBone Black == | |
− | + | http://eewiki.net/display/linuxonarm/BeagleBone+Black | |
− | |||
− | + | == Panda/Panda ES == | |
− | + | http://eewiki.net/display/linuxonarm/PandaBoard | |
− | + | = Upgrading from Debian 5 to Debian 6 = | |
− | |||
− | |||
− | |||
− | |||
− | + | [http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial. | |
− | |||
− | |||
− | |||
− | + | = Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) = | |
− | |||
− | + | Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install... | |
− | + | sudo apt-get update ; sudo apt-get upgrade | |
− | + | sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list | |
+ | sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg | ||
+ | sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade |
Revision as of 13:17, 14 September 2017
This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.
Contents
- 1 Help
- 2 Official BeagleBoard.org Images for shipping with BeagleBone Black
- 3 Recommended Beagle Software
- 4 Debian NetInstall
- 5 Demo Image
- 6 Flasher
- 7 raw microSD img
- 8 Debian Configuration
- 9 Building Kernel
- 10 Upgrading from Debian 5 to Debian 6
- 11 Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Help
If you need any help:
- Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees
- When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
- Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
Official BeagleBoard.org Images for shipping with BeagleBone Black
Recommended Beagle Software
Mainline U-Boot:
- All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
- XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
- Directions: Upgrade X-loader and U-Boot
Debian NetInstall
Scripts:
git clone https://github.com/RobertCNelson/netinstall.git cd netinstall
Device Options:
BeagleBoard --dtb omap3-beagle BeagleBoard-xM --dtb omap3-beagle-xm BeagleBoard-X15 --dtb am57xx-beagle-x15 BeagleBone (serial) --dtb am335x-bone-serial BeagleBone (video via cape) --dtb am335x-bone-video BeagleBone Black --dtb am335x-boneblack PandaBoard (A1->A3) --dtb omap4-panda PandaBoard (A4->Ax) --dtb omap4-panda-a4 PandaBoard ES --dtb omap4-panda-es
You will need a 1GB SD card or greater.
Standard System : ~455MB
Debian 9 (stretch)
Quick Install script for "board"
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch
So For the BeagleBoard xM:
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
- Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port
Demo Image
- Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
git clone https://github.com/RobertCNelson/armv7-multiplatform.git cd armv7-multiplatform git checkout origin/v4.13.x -b tmp ./build_kernel.sh
- Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git cd ti-linux-kernel-dev git checkout origin/ti-linux-4.4.y -b tmp ./build_kernel.sh
Debian (stretch)
Default username/password:
- username: debian
- password: temppwd
Image Updated:
- 2017-09-14
- BeagleBoard xM: v4.13.2-armv7-x1 kernel
- All BeagleBone Varients: v4.4.87-ti-r121 kernel
- OMAP5432 uEVM: v4.4.87-ti-r121 kernel
- BeagleBoard-X15: v4.4.87-ti-r121 kernel
- 2017-08-11
- BeagleBoard xM: v4.12.5-armv7-x3 kernel
- All BeagleBone Varients: v4.4.80-ti-r116 kernel
- OMAP5432 uEVM: v4.4.80-ti-r116 kernel
- BeagleBoard-X15: v4.4.80-ti-r116 kernel
- 2017-07-14
- BeagleBoard xM: v4.12.1-armv7-x2 kernel
- All BeagleBone Varients: v4.4.68-ti-r111 kernel
- OMAP5432 uEVM: v4.4.68-ti-r111 kernel
- BeagleBoard-X15: v4.4.68-ti-r111 kernel
Services Active:
Note: Depending on your internal network these may work out of the box Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2 Getty, Serial Port
Default user: debian pass: temppwd
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/elinux/debian-9.1-console-armhf-2017-09-14.tar.xz
Verify Image with:
sha256sum debian-9.1-console-armhf-2017-09-14.tar.xz 6d515158af0d3bc234ff56bf6a0b332ff8d4540ef0a3d224dd4969bc5260a499 debian-9.1-console-armhf-2017-09-14.tar.xz
Unpack Image:
tar xf debian-9.1-console-armhf-2017-09-14.tar.xz cd debian-9.1-console-armhf-2017-09-14
If you don't know the location of your SD card:
sudo ./setup_sdcard.sh --probe-mmc
You should see something like:
Are you sure? I don't see [/dev/idontknow], here is what I do see... fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card lsblk: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 446.9G 0 part / <- x86 Root Partition ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 18.9G 0 part [SWAP] sdd 8:48 1 3.7G 0 disk ├─sdd1 8:49 1 64M 0 part └─sdd2 8:50 1 3.6G 0 part
- In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
Install Image:
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
board options:
- BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
- BeagleBoard xM - omap3-beagle-xm
- All BeagleBone Varients - beaglebone
- OMAP5432 uEVM - omap5-uevm
- BeagleBoard-X15 - am57xx-beagle-x15
So for the BeagleBoard xM:
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Advanced: Build Image:
git clone https://github.com/RobertCNelson/omap-image-builder.git cd omap-image-builder git checkout v2017.09 -b tmp
Stable:
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
Testing:
./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf
Debian Testing (buster)
Image Updated:
- 2017-09-14
- BeagleBoard xM: v4.13.2-armv7-x1 kernel
- All BeagleBone Varients: v4.4.87-ti-r121 kernel
- OMAP5432 uEVM: v4.4.87-ti-r121 kernel
- BeagleBoard-X15: v4.4.87-ti-r121 kernel
- 2017-08-11
- BeagleBoard xM: v4.12.5-armv7-x3 kernel
- All BeagleBone Varients: v4.4.80-ti-r116 kernel
- OMAP5432 uEVM: v4.4.80-ti-r116 kernel
- BeagleBoard-X15: v4.4.80-ti-r116 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/elinux/debian-buster-console-armhf-2017-09-14.tar.xz
Verify Image with:
sha256sum debian-buster-console-armhf-2017-09-14.tar.xz 7ca7e51948a2c587523741f19a20c27ea5d9c96d9d5f4aed4326aec451a4b50e debian-buster-console-armhf-2017-09-14.tar.xz
Unpack image:
tar xf debian-buster-console-armhf-2017-09-14.tar.xz cd debian-buster-console-armhf-2017-09-14
Then follow the directions shown above with the other images...
Flasher
eMMC: All BeagleBone Varients with eMMC
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2017-09-14
- All BeagleBone Varients with eMMC: v4.4.87-ti-r121 kernel
- 2017-08-11
- All BeagleBone Varients with eMMC: v4.4.80-ti-r116 kernel
- 2017-07-14
- All BeagleBone Varients with eMMC: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/flasher/BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Verify Image with:
sha256sum BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb* 64ac7c4aede254e84762bd2a0d58d4fd3cc246703d37ff0cda76124266e342a1 BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat BBB-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX
eMMC: BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2017-09-14
- BeagleBoard-X15: v4.4.87-ti-r121 kernel
- 2017-08-11
- BeagleBoard-X15: v4.4.80-ti-r116 kernel
- 2017-07-14
- BeagleBoard-X15: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/flasher/bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Verify Image with:
sha256sum bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb* 835abde3870f34c0881bbbfefcf4f0ef4f0d4da83073e0c0e7619c028f34eed9 bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX
raw microSD img
BeagleBoard xM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-09-14
- BeagleBoard xM: v4.13.2-armv7-x1 kernel
- 2017-08-11
- BeagleBoard xM: v4.12.5-armv7-x3 kernel
- 2017-07-14
- BeagleBoard xM: v4.12.1-armv7-x2 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/microsd/bbxm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Verify Image with:
sha256sum bbxm-debian-9.1-console-armhf-2017-09-14-2gb* 563d070958dfde28532d359e9fdb7c7b43ed2a3d4013b262ca036cf4c7a08996 bbxm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbxm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX
All BeagleBone Varients
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-09-14
- All BeagleBone Varients: v4.4.87-ti-r121 kernel
- 2017-08-11
- All BeagleBone Varients: v4.4.80-ti-r116 kernel
- 2017-07-14
- All BeagleBone Varients: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/microsd/bone-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Verify Image with:
sha256sum bone-debian-9.1-console-armhf-2017-09-14-2gb* 8168bbca7f1d9540e2a92934b6f8f483f293139fbb89393a3104ed0f9ca2da23 bone-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bone-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX
OMAP5432 uEVM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-09-14
- OMAP5432 uEVM: v4.4.87-ti-r121 kernel
- 2017-08-11
- OMAP5432 uEVM: v4.4.80-ti-r116 kernel
- 2017-07-14
- OMAP5432 uEVM: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/microsd/omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Verify Image with:
sha256sum omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb* e9cae0d90f00f48455dab5d46e69413fa50fb707bdf8ab9e97bd871318b0f4f7 omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat omap5-uevm-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX
BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-09-14
- BeagleBoard-X15: v4.4.87-ti-r121 kernel
- 2017-08-11
- BeagleBoard-X15: v4.4.80-ti-r116 kernel
- 2017-07-14
- BeagleBoard-X15: v4.4.68-ti-r111 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-09-14/microsd/bbx15-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Verify Image with:
sha256sum bbx15-debian-9.1-console-armhf-2017-09-14-2gb* 5cd101f4d144c60fd6012ff8c411e3fa3481b2e44d9c7fdc44dc09b042800306 bbx15-debian-9.1-console-armhf-2017-09-14-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-debian-9.1-console-armhf-2017-09-14-2gb.img.xz | sudo dd of=/dev/sdX
Debian Configuration
Install Latest Kernel Image
General apt syntax for searching and installing a specific kernel:
sudo apt-get update sudo apt-cache search linux-image | grep <branch> sudo apt-get install linux-image-<specific version> sudo reboot
Latest kernel script
cd /opt/scripts/tools/ git pull sudo ./update_kernel.sh <OPTIONS>
3.8.x
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support --bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai --bone-xenomai-channel --stable
4.4.x-ti
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4 Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 --ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT --ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai --ti-xenomai-channel --lts-4_4
Mainline (4.4.x lts)
4.4.x BeagleBone/BeagleBone Black + SGX --bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX --bone-rt-kernel --lts-4_4
Mainline (4.9.x lts)
4.9.x BeagleBone/BeagleBone Black --bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT --bone-rt-kernel --lts-4_9
Debian 9: stretch
sudo apt-get install linux-image-armmp
Reboot with your new Kernel Image.
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
SGX Drivers
SGX BeagleBone/BeagleBone Black
Note, these are FBDEV only, no xorg/x11/etc...
Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29
Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v4.4 -b tmp-sgx ./sgx_create_package.sh
Copy ./deploy/GFX_5.01.01.02_es8.x.tar.gz to BeagleBone/BeagleBone Black and install
sudo tar xfv GFX_5.01.01.02_es8.x.tar.gz -C / cd /opt/gfxinstall/ sudo ./sgx-install.sh sudo reboot
Verify omaplfb & pvrsrvkm loaded
debian@arm:~$ lsmod | grep omaplfb omaplfb 12065 0 pvrsrvkm 178782 1 omaplfb
Building Kernel
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
Beagle/Beagle xM
http://eewiki.net/display/linuxonarm/BeagleBoard
BeagleBone
http://eewiki.net/display/linuxonarm/BeagleBone
BeagleBone Black
http://eewiki.net/display/linuxonarm/BeagleBone+Black
Panda/Panda ES
http://eewiki.net/display/linuxonarm/PandaBoard
Upgrading from Debian 5 to Debian 6
Upgrading from Debian 5 to Debian 6 report and tutorial.
Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
sudo apt-get update ; sudo apt-get upgrade sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade